summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2006-02-15KWorld ATSC110: implement set_pll_inputMichael Krufky
From: Curt Meyers <cmeyers@boilerbots.com> - When tuning VSB, use ANT input - When tuning QAM, use CABLE input Signed-off-by: Curt Meyers <cmeyers@boilerbots.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-15Add support for Kworld ATSC110Michael Krufky
From: Andrew Burri <andrew.burri@gmail.com> Signed-off-by: Andrew Burri <andrew.burri@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-13Merging rmcc tree.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-13Pinnacle PCTV 40i: add filtered Composite2 input for Composite signals on ↵Michael Krufky
S-Video From: Karsten Suehring <ksuehring@gmx.net> This patch adds another composite input to the Pinnacle PCTV 100i definition which filters the chrominace signal from the luma input. This improves video quality for Composite signals on the S-Video connector of the card. In addition the name string of the card is changed to include PCTV 40i and 50i since these cards are identical. Signed-off-by: Karsten Suehring <ksuehring@gmx.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-13Add saa713x card: ELSA EX-VISION 700TV (saa7130)Michael Krufky
From: Tamuki Shoichi <tamuki@linet.gr.jp> Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's flagship model of the software encoding TV capture card. All inputs (Television, Composite1 and S-Video) have been tested. Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-12remote control codes for BTTV_BOARD_CONTVFMIRicardo Cerqueira
From: BoyZonder <boyzonder@spymac.com> The remote control interface for this board is the same as the one for BTTV_BOARD_CONCEPTRONIC_CTVFMI2 Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-02-12Fixed saa7134 ALSA initialization with multiple cardsRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> When multiple cards were installed, only the first card would have audio initialized, because only the first position in the array parameter defaulted to "1" To make things worse, the "enable" parameter wasn't enabled, so there was no workaround. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-02-11KWorld HardwareMpegTV XPert must set gpio2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - KWorld HardwareMpegTV XPert must set gpio2 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-11KWorld HardwareMpegTV XPert: Add radio supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - add radio support for KWorld HardwareMpegTV XPert - fix GPIO settings for tv and radio Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-09fix in-kernel buildMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - remove tuner.ko build dependency on xc3028.o , which will be added again later. - fix the following build error when using the "make kernel-links" build method to symlink the latest code from the v4l-dvb repository into the kernel source: drivers/media/video/xc3028.c:31:20: em28xx.h: No such file or directory drivers/media/video/xc3028.c: In function `xc3028_init': drivers/media/video/xc3028.c:120: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:121: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:139: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:140: error: dereferencing pointer to incomplete type make[3]: *** [drivers/media/video/xc3028.o] Error 1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-08XC3028 code marked with an special define optionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - Current xc3028 support is still experimental, requiring more work to be sent to mainstream. So, it was marked inside some defines, in order to be removed by gentree.pl stript. Script also updated to remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07Adding support for Terratec Prodigy XSMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> Adding support for Terratec Prodigy XS Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-07disabled debug on by default in tvp5150Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> disabled debug on by default in tvp5150 Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-06Fix Samsung tuner frequency rangesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Forgot to take the NTSC frequency offset into account. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-02-06sem2mutex: fix local build and backwards-compatabilityMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Patch 3320 breaks our repository. This should fix it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06sem2mutex: drivers/media/, #2Mauro Carvalho Chehab
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Kernel-sync from patch 3318b Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06Make usage of module_param() macroMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync MODULE_PARM is an obsoleted macro. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06Sync patches to kernelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> dvb_bt8xx_remove return code changed to zero to avoid warning tvp5150_read doesn't need to be inline Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-05Add initial support for KWorld HardwareMpegTV XPertMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Add initial support for KWorld HardwareMpegTV XPert. - uses silicon tuner: tda8290 + tda8275 - standard video using cx88 broadcast decoder is working. - blackbird mpeg encoder support (cx23416) not yet working. - FM radio untested. - audio is only working correctly in television mode, all other modes disabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06Added support for the Tevion DVB-T 220RF cardHartmut Hackmann
From: Peter Hartshorn <p3r@users.sourceforge.net> This is a analog / digital hybrid card Signed-off-by: Peter Hartshorn <p3r@users.sourceforge.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-05Fixed em28xx based system lockup Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> fixed em28xx based system lockup, device needs to be initialized before starting the isoc transfer otherwise the system will completly lock up. Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-03fixed i2c return value, conversion mdelay to msleepMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> fixed i2c return value, conversion mdelay to msleep Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-03Added support for the ADS Instant TV DUO Cardbus PTV331Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Analog and DVB-T are working, Remote not yet. This card is based on the new LifeView design, there should be many variants. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-03TDA8290 updateHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch - works around a bug in the I2C bridge that makes the initialization of the TDA10046 fail on recent LifeView cards - puts the AGC output to tristate in sleep mode. This is necessary for recent hybrid cards that switch the AGC via tristateing. Signed-off-by: Hartmut Hackmann<hartmut.hackmann@t-online.de>
2006-02-03Added support for the LifeView FlyDVB-T LR301 cardHartmut Hackmann
From: Giampiero Giancipoli <gianci@libero.it> Additionally to the card support, this changeset adds the option tda10046lifeview to get_dvb_firmware to download tda10046 firmware from LifeView's site. Signed-off-by: Giampiero Giancipoli <gianci@libero.it> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-03Add missing NTSC_M_KR module ntsc parameter value for tda9887.Hans Verkuil
From: Hans Verkuil Signed-off-by: Hans Verkuil
2006-02-03Add V4L2_STD_NTSC_M_KR TV standard for South Korean NTSC-M using A2 audio.Hans Verkuil
From: Hans Verkuil South Korea uses NTSC-M but with A2 audio instead of BTSC. Several audio chips need this information in order to set the correct audio processing registers. Acked-by: Mauro Carvalho Chehab <mauro_chehab@yahoo.com.br> Signed-off-by: Hans Verkuil
2006-02-02add IR support to KWorld DVB-T (cx22702-based)Michael Krufky
From: Marco Manenti <marco_manenti@colman.it> add IR support to KWorld DVB-T (cx22702-based) Signed-off-by: Marco Manenti <marco_manenti@colman.it> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-01fixed amux hauppauge hvr900/terratec hybrid xsMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> fixed amux hauppauge hvr900/terratec hybrid xs Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-01fixed xc3028 firmware extractor, added terratec fw supportMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> fixed xc3028 firmware extractor for terratec's emBDA.sys firmware fixed delay in firmwareupload, now terratec's firmware also works Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-01added support for xc3028 analogue tuner (Hauppauge HVR900, Terratec Hybrid XS)Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> added support for xc3028 to v4l which adds support for: * Terratec Hybrid XS (analogue) * Hauppauge HVR 900 (analogue) Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-01-31Last tvp5150 patch introduced lots of bad whitespaces.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch removes all bad whitespaces introduced on tvp5150 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-31added signal detection support to tvp5150Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> added signal detection support to tvp5150 Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-01-31Changed description of KWorld PVR TV 2800RF Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> Changed description of KWorld PVR TV 2800RF Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-01-30show debug info for tuners trying to use unsupported video standardsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> With tuner_debug enabled, if a tuner tries to use a video standard that doesn't have a matching tuner_params defined, the IFPCoff value and tuner number will be displayed, and the default tuner_params entry will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-30use default tuner_params if desired_type not availableMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If a given tuner definition contains more than one tuner_params array members, it will try to select the appropriate tuner_params based on the video standard in use. If there is no tuner_params defined for the current video standard, it will select the default, tuner_params[0] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-31added terratec hybrid xs and kworld 2800rf supportmrechberger
From: Markus Rechberger <mrechberger@gmail.com> added terratec hybrid xs product/vendorid added gpio audio initialization for kworld pvr 2800rf Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-01-31Allow SAA7134 to fall back to AM sound when there is NICAM-L Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch allows to select AM sound even if NICAM is detected. Proposed by Alain Frappin Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-31Updated Avermedia 777 DVB-T to use dvb-pllHartmut Hackmann
From: Jose Alberto Reguero <jareguero@telefonica.net> linux/drivers/media/dvb/frontends/dvb-pll.c linux/drivers/media/dvb/frontends/dvb-pll.h - added td1316 tuner linux/drivers/media/video/saa7134/saa7134-dvb.c - changed tuning code for AverTV 777 to use dvb-pll Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-30update tuner commentsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Right now, all tuners are using the first tuner_params[] array element for analog mode. We are now ready to begin merging similar tuner definitions together, such that each tuner definition will have a tuner_params struct for each available video standard. The tuner_params[] array element will be chosen based on the video standard in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-29tuner_dbg will show tuner param and range selectedMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - tuner_dbg will show tuner param and range selected Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-29allow multiple tuner params in each tuner definitionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - allow multiple tuner params in each tuner definition. - the correct tuner_params element will be chosen based on current video standard. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-29move video std detection to top of set_tv_freq functionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - move video std detection to top of set_tv_freq function - we must detect video std first, so that we can choose the correct tuner_params Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-30Add support for the Avermedia 777 DVB-T cardHartmut Hackmann
From: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-29Fix NICAM buzz on analog soundRicardo Cerqueira
From: Marcin Rudowski <mar_rud@poczta.onet.pl> Apparently, having the number of lines fixed at 4 reduces (or even kills) the buzz found in NICAM stereo with analog sound. Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-01-29add count to tunertype structMichael Krufky
From: Michael Krufky <mkrufky@m1k.net> The tuner_params element is an array of undefined length, with each array member being a set of parameters for each video standard type. The number of members in the tuner_params array will be stored in tuners[]->count Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-24bug-fixMichael Krufky
bug-fix: allow tristate build for cx88-vp3054-i2c - allow tristate build for cx88-vp3054-i2c Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-23removed duplicated tuner_rangesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-23remove stray obsolete commentMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-23move config byte from tuner_params to tuner_range struct.Michael Krufky
- move config byte from tuner_params to tuner_range struct. - dvb tuners must be able to set different config byte for each range. Signed-off-by: Michael Krufky <mkrufky@m1k.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-25 02:35:44 +0000