summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2006-04-24merge: http://linuxtv.org/hg/~mkrufky/fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-23Remove broken 'fast firmware load' from cx25840.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The fast firmware load hack in cx25840 uses private data. In fact, it breaks pvrusb2 and doesn't work at all with ivtv. It is a unsafe implementation and so it is removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-22merge: from ~mkrufky/lg-h06xf-pll-fixMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-22merge: from ~mkrufky/blackbird.fixesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-22fix display name for LG TDVS-H06xFMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch fixes the display name for LG TDVS-H06xF tuners in both tuner and dvb-pll modules. Changing the names of the actual pll_desc struct and tuner definitions has been held back until after the dvb tuner refactoring gets merged. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-22fix frequency values in the ranges structures of the LG TDVS H06xF tunersMichael Krufky
From: Rusty Scott <rustys@ieee.org> Frequency range values in the current driver for the LG TDVS H06xF tuners appear to have been a transposing of the 5 in the mid range 160-455 instead of 165-450. This patch corrects the pll programming for these tuners as per the datasheet. Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-22Add support for the cx25836/7 video decoder.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-20cx88-blackbird: clean up the buffers when closing the MPEG streamMichael Krufky
From: Valentin Zagura <puthre@gmail.com> This patch cleans up the buffer queue when the MPEG stream is closed, preventing the message, 'cx8802_timeout' Signed-off-by: Valentin Zagura <puthre@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-20saa7134: Missing 'break' in Terratec Cinergy 400 TV initializationMichael Krufky
From: Mikhail Gusarov <dottedmag@dottedmag.net> There is a missing break in card initialization function. Might screw up initialization of Terratec Cinergy 400 TV. Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-20Additional frontend_init safety checksAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Don't try and set the tuner ops if the demod was not detected. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-20merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-20Fix critical typo in wm8775 support within pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Update operation of wm8775 in pvrusb2 to use new routing APIMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Need to compile two more sources in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Two modules had been added to pvrusb2. We need to compile them... Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Bracket a pvrusb2 24xxx-only structure correctlyMike Isely
From: Mike Isely <isely@pobox.com> Surround a 24xxx-specific data structure in pvrusb2 with the appropriate CONFIG option so that it won't be used if 24xxx support is not enabled. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Make PAL-N a supported standard if other PAL standards are present in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> If the pvrusb2 driver detects a PAL-capable device, add PAL-N to the list of supported standards. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Fix pvrusb2 bug involving bad return on V4L query control ioctlMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Fix off-by-1 problem in pvrusb2 video standard enumerationMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Keep the cx25840 I2C filter around in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Modify the I2C filter for cx25840 such that it stays around rather than going away after the initial sanity check has passed. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Log a warning message on a too-large I2C read attempt in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Change pvrusb2 module request behavior to be more conservativeMike Isely
From: Mike Isely <isely@pobox.com> Previously when the pvrusb2 driver loaded, it immediately did a request_module() on all possible I2C support modules it might need. But that is overkill, since the actual modules needed is a subset depending on the model type. This change delays module request until the hardware shows up, and then it only requests the modules that make sense for the specific hardware. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Implement I2C filter in pvrusb2 for cx25840Mike Isely
From: Mike Isely <isely@pobox.com> Insert an I2C transaction filter for the cx25843 chip on new model 24xxx hardware. This filter attempts to stabilize the part by limiting how the part can be accessed. The filter won't allow anyone to touch the chip until an attempt is made to specifically read the chip's revision registers. If that read fails (which can happen if the chip wedges itself), a warning is logged and the driver is rendered useless. If the read succeeds, then the filter deletes itself and normal access to the part takes place. This filter should keep msp3400 away from the chip (a failure scenario which otherwise frequently ends badly for the kernel, due to suspected misbehaviors within the msp3400 module). Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Fix pvrusb2 eeprom retrieval bugMike Isely
From: Mike Isely <isely@pobox.com> Fix minor problem where wrong I2C address was being used to execute the second phase of an eeprom fetch. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Implement I2C transaction filtering in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Implement a rudimentary filter mechanism in the I2C adapter within the pvrusb2 driver. It is possible now to interpose a filtering function on a per-target basis. This function can intercept the requested transaction and perform various manipulations on behalf of the client. With this mechanism is also a filter inserted for wm8775 that causes all probe attempts to the chip to always succeed (just return success on probe attempts without touching the hardware). This neatly solves the problem in the PVR USB2 hardware where we can't seem able to probe the chip at all. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Include linux/mutex.h not asm/mutex.h in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The correct mutex header to grab is linux/mutex.h, and while asm/mutex.h seems to work for x86 architecture, it has been reported not to work for amd64 architecture. So let's just do this right. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20cx23416 fix in pvrusb2 to allow xawtv to function againMike Isely
From: Mike Isely <isely@pobox.com> Tweak cx23416 configuration to permit xawtv to work again. This problem was introduced when the model 24xxx hardware support was added. The fix here repairs the problem while and is valid for both old and new hardware. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Make NTSC-Mj available in pvrusb2 when hardware reports NTSC-M availabilityMike Isely
From: Mike Isely <isely@pobox.com> PVR USB2 models that are NTSC capable are also able to handle the Japanese variant (according to the model info on the device's white sticker). However tveeprom doesn't report this. Work around this for now (and consider getting tveeprom fixed later). Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-20Change pvrusb2 subsystem definition bits for easier handlingMike Isely
From: Mike Isely <isely@pobox.com> Subsystem bits are defined as ordinal values now instead of bits in a mask. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-19Another rework of pvrusb2 video standard handlingMike Isely
From: Mike Isely <isely@pobox.com> Clean up logic for handling video standards in the pvrusb2 driver. New implementation should be able to handle all possible V4L defined video standards now, and it should be far easier to maintain this going forward. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-19Rework pvrusb2 internal controls implementationMike Isely
From: Mike Isely <isely@pobox.com> Rework controls internal architecture. Rework video standard handling. This is a major change. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-19Get rid of redundant inclusion of videodev2.hMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-19Merge: from v4l-dvbHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-19Add support for Samsung TCPG 6121P30A PAL tuner.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-19Fix tda10046 tuningAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I'd missed the i2c gate ctrl function out of the tda10046, so tuning didn't work Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-19Convert calls from _pllbuf() to _calc_reg()Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Johannes Stezenbach suggested this change - definite improvement. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert cx88-dvb to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Attach dvb-pll where possible. Add pll gate control calls where appropriate. Sort out the hybrid cards to work with the revamped mt352/sl10353 demods supporting external tuners. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert saa7134-dvb to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Attach dvb-pll where possible. Add pll gate control calls where appropriate. Move europa specific code from tda1104x into card driver using ops overrides (this is how it should ebe done instead of hacking card specific code into the demod driver). Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18cx88-dvb: use fe_lgh06xf.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - removed duplicated tuning code for LG TDVS H062F/H064F Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-17KWorld HardwareMpegTV XPert: set encoder video standard based on tvnormMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The KWorld HardwareMpegTV XPert uses a multistandard tuner, tda8290 + tda8275. Without checking the video standard in blackbird_probe, the encoder defaults to PAL, even if the incoming video stream is NTSC. This patch checks the video standard set by the cx2388x decoder, and sets the encoding height and frame accordingly. This patch is designed to only affect the KWorld HardwareMpegTV XPert. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-17cx88-blackbird: revert video standard detection patchMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch reverts changeset 328131dbb141 This patch was wrong... a better solution will come shortly. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-16From: Hans Verkuil <hverkuil@xs4all.nl>Hans Verkuil
Add support for TCL M2523_5N_E tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-16KWorld HardwareMpegTV XPert: Enable Blackbird MPEG encoder supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - clear I2SIN to deliver the audio stream to the cx23416 mpeg encoder. - enable blackbird support on the KWorld HardwareMpegTV XPert Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-14cx88-blackbird: use standard filename for cx23416 encoder firmwareMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> cx88-blackbird uses the same encoder firmware for the cx23416 chip that is used by ivtv and pvrusb2. This patch alters the driver to expect the cx23416 encoder firmware to be located in the file, "v4l-cx2341x-enc.fw", instead of using "blackbird-fw-enc.bin" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-14cx88-blackbird: use firmware api commands defined in cx2341x.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch removes all of the BLACKBIRD_API #define's, instead using the equivalent CX2341X_ENC #define's in cx2341x.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-13cx88-blackbird: fix typoMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> BLACKBIRD_FIELD1_SAA7115 was repeated. Corrected version reads: blackbird_api_cmd(dev, BLACKBIRD_API_SET_CAPTURE_LINES, 2, 0, BLACKBIRD_FIELD1_SAA7115, BLACKBIRD_FIELD2_SAA7115 ) Thanks-to: Valentin Zagura <puthre@gmail.com> for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-13cx88-blackbird: allow proper detection of PAL vs. NTSC video standardMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - removed test for CX88_BOARD_HAUPPAUGE_ROSLYN prior to determining whether the video standard in use is NTSC or PAL. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-04-13KWorld HardwareMpegTV XPert: update GPIO for s-video and compositeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - updated s-video and composite input GPIO settings. Thanks-to: Todd Duffin <nospam@tippyturtle.com> - s-video and composite inputs are still #if 0'd until we can get audio working properly on those inputs. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-13cx88-tvaudio: replace 'if' with 'switch..case'Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch cleans up a potential mess that has yet to occur in the card-specific part of cx88-tvaudio.c that sets sound input from external adc. It may be a good idea to move this setting into cx88-cards.c in the future. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-13cx88: added support for KWorld MCE 200 DeluxeMichael Krufky
From: Valentin Zagura <puthre@gmail.com> This patch adds support for KWorld MCE 200 Deluxe. Raw video is working perfectly, MPEG capture using cx88-blackbird is also working, but the quality could be improved. FIXME: tested TV input only, disabled composite, svideo and radio until they can be tested also. Signed-off-by: Valentin Zagura <puthre@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-11Keep #if 0/#if 1 for newer drivers at the treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 03:00:25 +0000