summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2007-03-256/7 Add raw bayer support to the ov7670 driverMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Add raw bayer support to the ov7670 driver Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-255/7 Don't mirror ov7670 images by defaultMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Don't mirror ov7670 images by default The ov7670 sensor driver sets the mirror bit by default, which is not the desired mode. OLPC has been running with this patch for a while. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-254/7 Add suspend/resume support to the Cafe CCICMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Add suspend/resume support to the Cafe CCIC driver. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-253/7 Fix up some Cafe CCIC delay issuesMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Fix up unsociable Cafe CCIC delays The Cafe CCIC driver contains some lengthy delays, some of which are unnecessary and some of which are done under lock. Some were marked with comments, but the comments somehow failed to make the issue go away. So fix it for real. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-252/7 Remove an obsolete PCI IDMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Remove an obsolete PCI ID The CAFE driver includes three PCI IDs, one of which corresponds to a development board which is no longer in use. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-251/7 Set the PCI device in the V4L2 deviceMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Set the PCI dev in the V4L2 dev so that the proper sysfs link gets made Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-24bttv: automatically load dvb-bt8xx for bttv cards with dvb supportMichael Krufky
From: Jarod Wilson <jwilson@redhat.com> This patch causes the bttv driver to automatically load the dvb-bt8xx module for bttv/dvb hybrid cards. Successfully tested with a pcHDTV HD-2000 card. This patch is based on the recent patches to enable autoloading of cx88-dvb, cx88-blackbird and saa7134-dvb. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-24tda827x: delayed probing of tuner versionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> When the tuner is attached, the tda10046 is not initilized yet, so it is searching for its firmware. If the tuner is attached to the tda10046 silent i2c port, a bus collision can occur. Now the version is probed during the first init or sleep call. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-23Fix pll input logic for nxt200x/tuv1236dMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch fixes a few troubles on nxt200x implementation: 1) A nxt200x internal input control logic were done on both cx88-dvb and saa7134-dvb; 2) The nx200x_set_pll_input callback were filling buffer, at the 5th position, without even testing if that buffer were filled; 3) a 5 byte buffer were written to the device, even if the buffer were not properly initialized by calc_regs. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-23set tda8290 to analog mode after initHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> otherwise the tuner driver will not accept i.e. the standby command. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-21Add Logitech ViewPort AV 100Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Logitech ViewPort AV 100 has the same internals as Cisco VT Camera. Fixing Pwc driver to handle it properly. Also, fixed the comments for both cameras. Thanks to Martin Rubli for pointing me this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-21pwc: cisco VT Camera supportMauro Carvalho Chehab
From: Jean Tourrilhes <jt@hpl.hp.com> I have a Cisco VT Camera, and it was just collecting dust. I decided to try connecting it to my Linux box at home. Just a disgression about the product. The Cisco VT Camera is a webcam Cisco sold to work with their IP phone hardware and software. It's mostly useless on Windows, as it interfaces only to Cisco software. You can find some for cheap on eBay... Physically, it's just a Logitech Pro 4000. The only difference with the Pro 4000 is the Cisco logo and that it's grey like the Pro 3000. I believe Cisco is now selling the Cisco VT Camera II, which look to be something else... So, assuming that it was a Pro 4000 inside, I created the little patch attached. I'm new to webcam under Linux, but I managed to get an image from it using xawtv, and the image looked all right, so I consider that a success. The imaged seemed a bit small and I could not get the microphone driver loaded, but I assume it's my lack of experience. Note that I did not try any other type_id, but this one works great. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-16Fix ivtv yuv threshold handlingHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-13The TV standard should be set AFTER the TV output is fully initialized.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-13merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-13merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-13Fix SECAM handling on saa7115Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-12Fix suspend/resume in msp3400 and tunerHans Verkuil
From: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Initialize the inputs before registering the devices.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Once the devices have been registered anyone can start changing the inputs or TV standard before they have been initialized by the driver. This leads to cases were the input is changed in an udev rule, but after that rule is triggered the tail-end of the ivtv driver initialization can override that by selecting the tuner input. The correct sequence is to first setup the input, initial frequency and TV standard before finally registering the video devices. This prevents any udev rules from being triggered prematurely. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11cx88: whitespace cleanupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> replace leading spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-11cx88: autodetect ADS Tech InstantTV DVB-SMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100. This patch adds autodetection support for this card based on pci subsystem id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-11First unregister the driver, and then free the memory.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Use pci_register_driver instead of pci_module_init in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11msp_attach must return 0 if no msp3400 was found.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Returning -1 causes the probe to stop, but it should just continue instead. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Add missing kfree in early exit of saa7115.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Use spin_lock_init to fix lockdep warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMANDHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Use v4l_printk_ioctl instead of printing the ioctl name for each ioctl in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add VIDIOC_G/S_PRIORITY support to ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add comment why the symbols are exported.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree. Added a comment so people are aware of these issues. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add missing includes.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Every file should include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Merges VBI & YUV handling into a single work queue.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Set vsync_field correctly in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-09Usbvideo module handlingMauro Carvalho Chehab
From: Oliver Neukum <oneukum@suse.de> Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-09Cpia_pp.c: don't use _WORK_NARMauro Carvalho Chehab
From: Oleg Nesterov <oleg@tv-sign.ru> pp_cam_entry->cb_task need not to be _NOAUTOREL ... because in fact it is never used ??? Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-09Saa7134: fix MODULES=n compilationMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch fixes the following compile error with CONFIG_MODULES=n: CC drivers/media/video/saa7134/saa7134-core.o /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979:24: error: macro "request_submodules" passed 1 arguments, but takes just 0 /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c: In function 'saa7134_initdev': /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: 'request_submodules' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: for each function it appears in.) make[5]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1 Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-09cx88: merge identical boardsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The attach code for HAUPPAUGE_HVR3000 and HAUPPAUGE_HVR1300 is exactly the same as the code used by HAUPPAUGE_HVR1100, HAUPPAUGE_HVR1100LP, and WINFAST_DTV2000H. So, those first two cards are added to the case block used by the last three. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-03-17merge: http://linuxtv.org/hg/~hhackmann/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-17merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-17merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-15Renamed ASUStek P7131 card [1043:4876]Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> The new name fits to what it is and what is on the box. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-14Added / corrected support for some ASUS hybrid boardsHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> There are 2 new entries for p7131 boards and one correction for a board with LNA Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-14saa7134-dvb fix sleep function of the fmd1216 tuner.Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Static locals should not be changed - the original contents gets lost. Thanks to Trent Piepho for pointing me to this. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-14saa7134: put tuner to sleep mode after board initializationHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Besides power saving, this puts the AGC output of the tda8290 to tristate. This is necessary for some hybrid boards which don't use a multiplexer for the AGC Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-12Updates to the tveeprom tuner, video decoder and audio chip structs.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Some of the new tuner entries may need to be mapped to compatible tuners already defined. I don't know for certain which tuners are compatible between manufacturers. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-03-09merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-07zr364xx: Use kernel's byte-swapping functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Some code to swap bytes wasn't using the swab16() function that the kernel provides for this. Make use of it, which results in more efficient code. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Antoine Jacquet <royale@zerezo.com>
2007-03-07saa7134: Clean up printk()sTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Change some debug messages from printk() to dprintk(). Add KERN_WARNING and KERN_ERR level indicators to other printk()s that lacked them. Format printk lines with consistent ("%s/dvb: ", dev->name) prefix. Fixed dprintk macro, which had an if with no else that wasn't protected with a do {} while(0) block. That leads to "if(...) dprintk(); else" not doing what one would expect. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-07Add tveeprom entry for tuner LG S701D MK3Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-07Ivtv warning fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 03:40:14 +0000