summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-06-15ov511: Fix unit_video parameter behaviorMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Fix a regression caused by changeset 9133:64aed7485a43 - v4l: disconnect kernel number from minor Before the above changeset, ov511_probe used to allow forcing to use a certain specific set of video devices, like: modprobe ov511 unit_video=4,1,3 num_uv=3 So, assuming that you have 5 ov511 devices, and connect they one by one, they'll gain the following device numbers (at the connection order): /dev/video4 /dev/video1 /dev/video3 /dev/video0 /dev/video2 However, this was changed due to this change at video_register_device(): + nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr); With the previous behavior, a trial to register on an already allocated mirror would fail, and a loop would get the next requested minor. However, the current behavior is to get the next available minor instead of failing. Due to that, this means that the above modprobe parameter will give, instead: /dev/video5 /dev/video6 /dev/video7 /dev/video8 /dev/video9 In order to restore the original behavior, a static var were added, storing the amount of already registered devices. While there, it also fixes the locking of the probe/disconnect functions. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12merge: v4l-dvbJean-Francois Moine
2009-06-12v4l: i2c modules must be linked before the v4l2 driversHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Udo A. Steinberg <udo@hypervisor.org>
2009-06-12gspca - ov534: Do the ov772x work again.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> The scan of the image packets of the sensor ov772x was broken when the sensor ov965x was added. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-06-10gspca - main: Skip disabled controls.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-06-09em28xx: don't create audio device if not supportedDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> In cases where the device does not actually provide a USB audio class *or* vendor audio, do not load the driver that provides vendor audio support (such as the KWorld 2800d). Otherwise, the /dev/audio1 device file gets created and users get confused. Also, reworks the logic a bit so that we don't try to inspect the register content if the register read failed entirely. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-06-07gspca - ov519: Add support for the ov518 bridge.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-06-06em28xx: Add Kworld 315 entryDouglas Schilling Landgraf
From: Franklin Meng <fmeng2002@yahoo.com> Added an entry for Kworld 315 (for while, dvb only) Priority: normal Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-06-06em28xx: set up tda9887_conf in em28xx_card_setup()Douglas Schilling Landgraf
From: Franklin Meng <fmeng2002@yahoo.com> Added tda9887_conf set up into em28xx_card_setup() Priority: normal Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-05-29gspca - spca505: Reinitialize the webcam at resume time.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-05-07soc-camera: prepare for the platform driver conversionGuennadi Liakhovetski
Add a platform driver to soc_camera.c. This way we preserve backwards compatibility with existing platforms and can start converting them one by one to the new platform-device soc-camera interface. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2009-05-07Analog Devices ADV7343 video encoder driverMauro Carvalho Chehab
From: Chaithrika U S <chaithrika@ti.com> Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It has been tested for Composite and Component outputs. Updates as per review by Mauro Chehab, added support for more standards supported by the encoder. Also adding the missed out signed-offs.Tested only NTSC and PAL standards. Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> [hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API] Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-07TI THS7303 video amplifier driver codeMauro Carvalho Chehab
From: Chaithrika U S <chaithrika@ti.com> This patch adds driver for TI THS7303 video amplifier. This driver is implemented as a v4l2 sub device. Tested on TI DM646x EVM. This version has updates based on review comments by Mauro Chehab. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-07gspca - sonixj: Webcam 06f8:3008 added.Jean-Francois Moine
From: Jani Monoses <jani@ubuntu.com> Priority: normal Signed-off-by: Jani Monoses <jani@ubuntu.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-05-06au0828: send command to power down tuner when done with analogDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Make sure the au0828 issues the command to power down the tuner when the user is done using analog support. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-05-06gspca - m5602-s5k4aa: Add vflip quirk for the Lenovo Y300Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> The Lenovo Y300 has its sensor upside down. Quirk it to gain normal functionality. Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2009-05-06uvcvideo: Add missing whitespaces to multi-line format strings.Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-05-06uvcvideo: Parse frame descriptors with non-continuous indexes.Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> The UVC specification requires frame descriptors indexes to range from 1 to the number of frame descriptors. At least some Hercules Dualpix Infinite webcams erroneously use non-continuous index ranges. Make the driver support them. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-05-05pvrusb2: Ensure the PVRUSB2 disabled the i2c gate on the tda10048.Steven Toth
From: Steven Toth <stoth@linuxtv.org> ... else DVB-T tuning will not work. Priority: high Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-05-05merge: http://linuxtv.org/hg/~eandren/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-05cafe_ccic: use = instead of == for setting a value at a varMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> /home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init': /home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect Priority: high CC: Hans Verkuil <hverkuil@xs4all.nl> CC: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-05gspca - vc032x: mi1320_soc images are upside-down.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-05-05gspca - vc032x: Bad pixelformat for mi1320_soc.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-05-09gspca - sonixj: Webcams with bridge sn9c128 added.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-05-03cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1270Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-03cx18: Have audio decoder drive SIF gain control, and rework AFE configAndy Walls
From: Andy Walls <awalls@radix.net> Ensure the variable gain amplifier gain for SIF is driven by the audio deocder and not the video decoder. This forced rework of the analog front end (AFE) configuration to not rely on autoconfiguration, but instead set up the AFE mux, AFE parameters, and ADC1 & ADC2 configurations explicitly. Reported-by: Helen Buus <mythtv@hbuus.com> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-05-03gspca - stv06xx-vv6410: Set analog gain at initErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Set the analog gain at sensor init. Also set a sensible default value. Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2009-05-03cafe_ccic: fix sensor detectionMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Due to an uninitialized chip.ident field the chip identification failed. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Thanks-to: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02zoran: Fix &&/|| typoMauro Carvalho Chehab
From: Roel Kluin <roel.kluin@gmail.com> Fix &&/|| typo Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02V4L/DVB: cleanup redundant tests on unsignedMauro Carvalho Chehab
From: Roel Kluin <roel.kluin@gmail.com> Remove redundant tests on unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusionMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have been used. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02cx23885: Add preliminary support for the HVR1270Steven Toth
From: Steven Toth <stoth@kernellabs.com> The patch means the board will be recognised, and the parts brought out of reset correctly. This patches depends on the centralized GPIO patch to be merged. What's missing before the HVR-1270 will function for DTV? The model# needs to be added to avoid 'unknown model' output and the LG3305/Tuner need to be attached in cx23885-dvb.c Priority: normal Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-11cx23885: mark functions encoder_on_port[bc] as static inlineMichael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-02cx23885: Add generic functions for driving GPIO'sSteven Toth
From: Steven Toth <stoth@kernellabs.com> The GPIO's on the product can be in one of three places. To date we've mainly used the GPIO's on the bridge itself, and once on the encoder. Rather than having the complexity of multiple GPIO writes/reads from isolated placed in the driver we'll route them through this function, so we can make intelligent decisions about 1) Where the GPIO lives and 2) Whether it conflicts (based on board) with some other function to avoid bugs. Priority: normal Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-02ivtv: fix incorrect bit testsMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Found the coccinelle tool. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Thanks-to: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02pvrusb2: Ensure we specify the I/F at attach time.Steven Toth
From: Steven Toth <stoth@linuxtv.org> pvrusb2: Ensure we specify the I/F at attach time. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2009-05-02cx23885: For tda10048 boards ensure we specify the I/FSteven Toth
From: Steven Toth <stoth@linuxtv.org> cx23885: For tda10048 boards ensure we specify the I/F Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2009-05-02v4l2-device: unregister i2c_clients when unregistering the v4l2_device.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Until now I relied on i2c_del_adapter to unregister the i2c_clients for me, however, if the i2c bus is a platform bus then it is never deleted. So instead I need to unregister i2c clients when unregistering the v4l2_device. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02ivtv: use v4l2_device_set_name.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02v4l2: add v4l2_device_set_name()Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Add a utility function that can be used to setup the v4l2_device's name field in a standard manner. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02tuner: remove tuner_i2c_address_checkMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Support for tuners with i2c addresses >= 0x65 is dropped since no tuners with addresses in the range 0x65-0x6f have been found. This patch removes addresses 0x65-0x6f from the list of tuner probe addresses, it removes the kernel warning that warned if addresses in this range appeared, and it removed a hack for the cx88 that is no longer needed now that the tuner address range is reduced. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02uvc: fix compile warningMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> The 2.6.30 kernel generates this warning: uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function I guess some new warning flag must have been turned on since this warning didn't appear with older kernels (gcc version 4.3.1). It's also a bogus warning, but since this code didn't comply to the coding standard anyway I've modified it to 1) remove the warning and 2) conform to the coding standard. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02ivtv: fix compiler warning.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-05merge: http://www.linuxtv.org/hg/~stoth/cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-01pvrusb2: remove driver_data direct access of struct deviceMike Isely
From: Greg Kroah-Hartman <gregkh@suse.de> In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Priority: normal Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mike Isely <isely@pobox.com>
2009-05-01pvrusb2: Don't use the internal i2c client listMike Isely
From: Jean Delvare <khali@linux-fr.org> The i2c core used to maintain a list of client for each adapter. This is a duplication of what the driver core already does, so this list will be removed as part of a future cleanup. Anyone using this list must stop doing so. For pvrusb2, I propose the following change, which should lead to an equally informative output. The only difference is that i2c clients which are not a v4l2 subdev won't show up, but I guess this case is not supposed to happen anyway. Priority: normal Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mike Isely <isely@pobox.com>
2009-05-01pvrusb2: Bump up version advertised through v4l interfaceMike Isely
From: Mike Isely <isely@pobox.com> Kick up the pvrusb2 version number advertised through the v4l interface. This value really has almost no meaning because I don't make a serious attempt to version the driver in this manner (otherwise this one line becomes a nasty hotspot of changes and merge conflicts). The value that is here is really a historical thing. However Hans Verkuil thought it might be a good idea to bump up the number anyway right now since the driver's mechanism for communicating with the v4l core has pretty much completely changed. Sending out a different version number can be useful for later debugging in case a problem arises. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-05-01pvrusb2: Set ir_video autoloading to default disabledMike Isely
From: Mike Isely <isely@pobox.com> This sets the disable_autoload_ir_video module option to being set, which disables any attempt by the driver to autoload IR support. This changes preserves previous behavior, for now. This change can be set back concurrent with other changes that finally update i2c-kbd-i2c to use the new i2c binding model. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-05-01pvrusb2: Update to work with upcoming ir_video changes in v4l-dvb coreMike Isely
From: Mike Isely <isely@pobox.com> The ir-kbd-i2c module is about to be updated to match the new style i2c binding model. These pvrusb2 changes maintain compatibility with that change. Note that this does not actually break anything even without the expected ir-kbd-i2c changes yet because previously the pvrusb2 didn't autoload ir-kbd-i2c anyway. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-04-30v4l2-ioctl: Clear buffer type specific trailing fields/paddingTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Some ioctls have structs that are a different size depending on what type of buffer is being used. If the buffer type leaves a field unused or has padding space at the end, this space should be zeroed out. The problems with S_FMT and REQBUFS were original identified and patched by Márton Németh <nm127@freemail.hu>. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-26 10:22:10 +0000