summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2008-09-05budget: Add callback to load firmware for the TDHD1 tunerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Supply callback to load firmware for the TDHD1 tuner (using request_firmware). Priority: normal Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-09-04dvb-ttpci: Support full-ts hardware modificationOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add support for the 'full-ts' hardware modification. On full-featured cards the data throughput is limited by the hardware design. The full-ts mod removes this bottleneck, i.e. the card is able to deliver the complete transport stream of a transponder. For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod Priority: normal Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-09-03budget: Support Activy DVB-T with TDHD1 tunerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Priority: normal Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-09-02merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-02gspca: After 'while (retry--) {...}', retry will be -1 but not 0.Jean-Francois Moine
From: Li Zefan <lizf@cn.fujitsu.com> Priority: high Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-09-02gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> - Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is the same change as done for the other initdata tables in a previous patch. - Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102 drivers are both enabled. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-09-01PATCH: Fix parents on some webcam driversMauro Carvalho Chehab
From: Hans de Goede <j.w.r.degoede@hhs.nl> While doing some testing using Luca Risolia's sonix driver I noticed that the video device did not get ACL's set to allow access by locally logged in users, nor does it show up as a video device in lshal, causing cheese to not see it. This turns out to be caused by all of Luca Risolia's drivers not setting the parent member of the video_device struct. This patch fixes this. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> CC: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-01gspca: Bad image offset with rev012a of spca561 and adjust exposure.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -Make raw bayer header size change from 20 to 16 affect rev072a only, my 2 rev012a cams both have a header size of 20 -While testing this I also tested the new exposure setting (good work on finding the register JF), and after quite a bit of testing have found out the exact meaning of the register, this patch modifies setexposure to control the exposure over a much wider range. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-31gspca: Bad image format and offset with rev072a of spca561.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - have 2 pixfmt tables - offset of Bayer frames at 16 instead of 20. Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-31merge: v4l-dvbJean-Francois Moine
2008-08-31gspca: Fix dark room problem with sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> When using the sonixb driver in a dark room and given that the autoexposure algorithm starts with a setting most suitable for daylight, the picture produced by the cam may actually be 100% black leading to a avg_lum value of 0, so an avg_lum value of 0 does not always signal an exposure settings change (which it normally does). This patch adds a check for the really black image case and stops dropping all frames as invalid in this case. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-30gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 to gspca.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca). It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-30gspca: Support for vga modes with sif sensors in sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> - Add documentation for some known registers - Add support for vga modes (320x240, 160x120) for sif sensors - Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge only thing and keeping the flag was becoming awkward. - Fixup ov6650 and pas106 auto exposure window settings Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-30bttv: Don't unmask VPRES interruptMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> When the input is set to tuner and no antenna is connected, the BT848 can flood VPRES interrupts. So we don't want to enable this type of interrupts when the input it set to tuner. As we don't do anything when receiving such an interrupt anyway, the easiest fix is to simply not unmask this specific interrupt. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-02merge: http://linuxtv.org/hg/~tmerle/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-02merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-02merge: http://linuxtv.org/hg/~pb/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-02merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-01b2c2 and bt8xx: udelay to mdelayThierry MERLE
From: Thierry MERLE <thierry.merle@free.fr> b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with: __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Priority: high Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
2008-09-01budget: udelay changed to mdelayThierry MERLE
From: Thierry MERLE <thierry.merle@free.fr> budget.ko fails to build on ARM with: ERROR: "__bad_udelay" [drivers/media/dvb/ttpci/budget.ko] undefined! make[1]: *** [__modpost] Error 1 __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Priority: high Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
2008-08-31uvcvideo: fix compilation on older kernelsHans Verkuil
From: Laurent Pinchart <laurent.pinchart@skynet.be> The USB reset_resume method appeared in 2.6.23. This patch fixes compilation of the v4l-dvb tree on older kernels. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-30Add dummy FE to the Kconfig-file and fix itPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Reactivated dummy frontend driver which is extremely useful for debugging. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-08-30Backport some other minor changes from kernelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-08-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-30bt856: fix define conflictHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-30compat: add current_uid define to fix compile errors on kernels < 2.6.27Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-29uvcvideo: Add support for a Bison Electronics webcam found in the Fujitsu ↵Mauro Carvalho Chehab
Amilo SI2636. From: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29uvcvideo: Supress spurious "EOF in empty payload" trace messageMauro Carvalho Chehab
From: Laurent Pinchart <laurent.pinchart@skynet.be> Pass the payload size instead of the header size to uvc_video_decode_end() to avoid generating an extra trace message for each frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29v4l2: use register_chrdev_region instead of register_chrdevHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Replace the old register_chrdev with the more flexible register_chrdev_region. Ensure that the release() is called when the very last chardev usage was released, and not when the sysfs devices were removed. This should simplify hotpluggable drivers considerably. Tested-by: Mike Isely <isely@isely.net> Tested-by: Laurent Pinchart <laurent.pinchart@skynet.be> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth <david@identd.dyndns.org> Reviewed-by: Hans de Goede <j.w.r.degoede@hhs.nl>
2008-08-29s2255drv: adds JPEG compression quality controlMauro Carvalho Chehab
From: Dean Anderson <dean@sensoray.com> adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for controlling JPEG compression quality. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29gspca: Same pixfmt as the sn9c102 driver and raw Bayer added in sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-29gspca: Have a bigger buffer for sn9c10x compressed images.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-29gspca: Cleanup the sonixb code.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28gspca: Bad pixelformat of vc0321 webcams.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28gspca: Resolve webcam conflicts between some drivers.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28dabusb_fpga_download(): fix a memory leakMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch fixes a memory leak in an error path. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-28tda10048_firmware_upload(): fix a memory leakMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch fixes a memory leak ("fw" wasn't freed). Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-28vivi_release(): fix use-after-freeMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> video_device_release() does kfree(), which made the following printk() doing a use-after-free. printk() first and release then. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~mkrufky/bristolMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-28dib0700: add basic support for Hauppauge Nova-TD-500 (84xxx)Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This adds basic support for the Hauppauge Nova-TD-500 84xxx series. A future patch will allow for one aerial input to supply both tuners. With the current code, an aerial must be plugged into each antannae input in order for both tuners to function. Priority: high Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-08-28dib0700: add comment to identify 35th USB id pairMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This comment helps to make the code more readable. Priority: high Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-08-27CRED: Wrap task credential accesses in video input driversMauro Carvalho Chehab
From: David Howells <dhowells@redhat.com> Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29dvb: fix I2C adapters name sizeMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> Some DVB drivers are incorrectly assuming that the size of i2c_adapter.name is I2C_NAME_SIZE. Here's a fix. Also change strncpy to strlcpy, as the former is error-prone (and was indeed incorrectly used.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Uwe Bugla <uwe.bugla@gmx.de> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://www.linuxtv.org/hg/~stoth/cx23885-leadtekMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://www.linuxtv.org/hg/~stoth/cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 21:03:30 +0000