summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2007-02-06Radio/: Convert to generic boolean-valuesMauro Carvalho Chehab
From: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06From: Adrian Bunk <bunk@stusta.de>Mauro Carvalho Chehab
v4l_printk_ioctl_arg() is no longer used. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Cx88-video.c: remove struct radionormsMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch removes the unused struct radionorms. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Cafe_ccic.c fix warningMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Quiet a spurious gcc warning. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Convert to generic boolean-valuesMauro Carvalho Chehab
From: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06VIDEO_BUF depends on PCIMauro Carvalho Chehab
From: Andrew Morton <akpm@osdl.org> m68k allmodconfig: drivers/media/video/video-buf.c: In function 'videobuf_queue_pci': drivers/media/video/video-buf.c:396: error: 'pci_map_sg' undeclared (first use in this function) drivers/media/video/video-buf.c:396: error: (Each undeclared identifier is reported only once drivers/media/video/video-buf.c:396: error: for each function it appears in.) drivers/media/video/video-buf.c:399: error: 'pci_dma_sync_sg_for_cpu' undeclared (first use in this function) drivers/media/video/video-buf.c:401: error: 'pci_unmap_sg' undeclared (first use in this function) drivers/media/video/video-buf.c: In function 'videobuf_pci_dma_map': Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Frontends/: make 4 functions staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Remove the unused kernel config option VIDEO_VIDEOBUFMauro Carvalho Chehab
From: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Merge: http://linuxtv.org/hg/~hverkuil/v4l-dvb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Avoid race when deregistering the IR control for dvb-usbMauro Carvalho Chehab
From: Chris Rankin <rankincj@yahoo.com> The work item function is dvb_usb_read_remote_control(): INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); and the last piece of work it does is: schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); Hence you need to call "cancel_rearming_delayed_work()" and not "cancel_delayed_work()", correct? I certainly haven't seen this oops reoccur since I applied this patch. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-05cx25840 request_firmware failed due to wrong device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to changes in the /sys directory structure a bug in the cx25840 firmware load surfaced in 2.6.20: the device passed to request_firmware was wrong: instead of the i2c device the i2c adapter was passed. Because of this an attemp was made to create a kobject with the adapter name inside the adapter directory, but a kobject with that name already exists. Now pass the i2c device itself so that the correct /sys directory is used. This way the firmware can be loaded again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-05Backed out changeset a829a6ca77529b26451610ec6368ceeaa8103ebdMichael Krufky
From: Chris Rankin <rankincj@yahoo.com> Due to usb_to_input_id(), this change was completely unnecessary. These three lines are trying to do exactly what usb_to_input_id() does already. Remove them. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-03budget-av: Call saa7146_vv_release on exitOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Call saa7146_vv_release on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-03Fix CC handling in VIDIOC_INT_G_VBI_DATAHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When capturing a 60 Hz input the internal field ID is inverted. The VIDIOC_INT_G_VBI_DATA didn't take that into account and so returned XDS instead of CC and vice versa. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03Fix cx2584x revision reporting.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Revisions >= 23 were always reported as revision 23. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-02budget-ci: Add separate configuration data for subsystem 0x13c2:0x1012Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed problem reported by Teemu Suikki: After a device with subsystem 0x13c2:0x1012 has been installed, devices with subsystem id 0x13c2:0x1011 did not work anymore. Reason: The driver for 0x13c2:0x1012 modified shared configuration data. Fix: Use separate configuration data for those devices. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-02Http://linuxtv.org/hg/~mcisely/pvrusb2
From: Mauro Carvalho Chehab <mchehab@infradead.org> Follows the same coding style for commented code The latest patch series added a different way of commenting unused patches: #ifdef notdef But V4L/DVB coding style uses, instead: #if 0 This have also the advantage of not sending to mainstream those development codes that doesn't make sense at a production environment, while keeping them under development trees. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mike isely <isely@pobox.com>
2007-02-02Merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-01merge: http://linuxtv.org/hg/~tap/v2l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-31dvb-ttpci: call saa7146_vv_release() on exitOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Call saa7146_vv_release() on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-01-31saa7146_vv: pass correct memory size to pci_free_consistentOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Pass correct memory size to pci_free_consistent. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-01-30Remove obsolete alias defines of CONFIG_* settingsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-01-30compat: Handle input_register_device() change and some othersTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> input_register_device() was changed to return an error code instead of being void in 2.6.15. Handle it with a macro wrapper in config.h. For this to work, linux/input.h must be included before config.h. This required some trivial header re-ordering in budget-ci.c and ttusb_dec.c. In kernel 2.6.15-rc1 a helper function called setup_timer() was added to linux/timer.h. Add to compat.h, but require that linux/timer.h be included first to give the definition of struct timer_list. A new 4GB DMA zone, __GFP_DMA32, was added in 2.6.15-rc2. Alias it to __GFP_DMA on older kernels. Handle another 2.6.15 "input_dev->dev to input_dev->cdev.dev" change for some recently added code in cinergyT2.c. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-01-30Add checks for CAP_SYS_ADMIN to VIDIOC_DBG_G_REGISTERTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Before, root privileges were only needed to set hardware registers, not to read them. On some hardware, reading from the wrong place at the wrong time can hang the machine. So, to be consistent, root privileges are required to read registers on all hardware. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-01-30Change VIDIOC_DBG_[SG]_REGISTER ioctls' register address to 64 bitsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Maybe someday there will be a device with a register address space > 32-bits, or maybe an i2c device which uses a protocol > 4 bytes long to address its registers. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-01-28pvrusb2: VIDIOC_DBG_[S|G]_REGISTER fixupsMike Isely
From: Mike Isely <isely@pobox.com> Support 64 bit register IDs internally. Only allow root access to this API (for both set and get). Note that actual 64 bit access only becomes possible once the definition for v4l2_register is updated, but this change clears the way for it from the viewpoint of the pvrusb2 driver. Signed-off-by: Mike Isely <isely@pobox.com>
2007-01-28pvrusb2: video corruption fixesMike Isely
From: Mike Isely <isely@pobox.com> Tweak the encoder setup in order to stop it from corrupting the video data when there is a disruption in the data flow (e.g. a channel change). Signed-off-by: Mike Isely <isely@pobox.com>
2007-01-28pvrusb2: encoder comm protocol cleanupMike Isely
From: Mike Isely <isely@pobox.com> Update the implementation of the communication protocol for operating the encoder, using updated knowledge about the encoder. Signed-off-by: Mike Isely <isely@pobox.com>
2007-01-28pvrusb2: Control protocol cleanupMike Isely
From: Mike Isely <isely@pobox.com> Several special-case FX2 commands were being issued through pvr2_write_u16() and pvr2_write_8(), but there's really nothing special case about them. These date from a very early time in the driver development. This patch removes these functions and replaces their use with calls to pvr2_send_request. Signed-off-by: Mike Isely <isely@pobox.com>
2007-01-28Merge from v4l-dvbMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-01-28merge: http://linuxtv.org/hg/~endris/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-28dvb-ttpci: Fixed unregistering the vbi deviceOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed unregistering the vbi device for cards without analog tuner. Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing out this bug. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-01-26Fix: dma free is being called with wrong argumentsMauro Carvalho Chehab
From: Michael Schimek <mschimek@gmx.at> Functions buffer_release() in bttv-driver.c and vbi_buffer_release() in bttv-vbi.c are ending with: bttv_dma_free(&fh->cap,fh->btv,buf); For vbi it seems to be wrong. Both functions should end with: bttv_dma_free(q,fh->btv,buf); Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-26Properly initialize mute and radio frequencyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-26Add some debug info, depending on debug levelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> With debug>0, it will show mute/unmute and set frequency events with debug>=4, it will show get frequency events Also, some kernel CodingStyle fixes were done. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-26Make it coherent with vidioc_g_tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25Implements VIDIOC_[S|G]_INPUT on radio-aztech and radio-maxiradioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> fmtools use VIDIOCSTUNER, with, in turn, calls VIDIOC_S_INPUT on v4l1-compat. So, those ioctls are required for V4L1 to work properly. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25Implement VIDIOC_[GS]_AUDIO on aztechMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25Implement VIDIOC_[GS]_AUDIO on maxiradioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25Convert radio-maxiradio to use video_ioctl2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25Convert radio-aztech to use video_ioctl2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25Make vivi driver to use vmalloced pointersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Before this patch, vivi were simulating a scatter gather DMA transfer. While this is academic, showing how stuff really works on a real PCI device, this means a non-optimized code. There are only two memory models that vivi implements: 1) kernel alloced memory. This is also used by read() method. On this case, a vmalloc32 buffer is allocated at kernel; 2) userspace allocated memory. This is used by most userspace apps. video-buf will store this pointer. a simple copy_to_user is enough to transfer data. The third memory model scenario supported by video-buf is overlay mode. This model is not implemented on vivi and unlikely to be implemented on newer drivers, since now, most userspace apps do some post-processing (like de-interlacing). After this patch, some cleanups may be done at video-buf.c to avoid allocating pages, when the driver doesn't need a PCI buffer. This is the case of vivi and usb drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-25dvb-ttpci: Set phys, bustype, version, vendor and product for input deviceOliver Endriss
From: Matthias Schwarzott <zzam@gentoo.org> Add phys-string, bustype, version, vendor and product to help udev and others using EVIOCPHYS ioctl to identify the input device node. Code taken (with little changes) from budget-ci.c Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-01-23Make VIDIOC_INT_[SG]_REGISTER ioctls no longer internal onlyTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-01-23merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-23merge: http://linuxtv.org/hg/~mkrufky/megasky-m920xMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-23Buf_qbuf: fix: videobuf_queue->stream corruption and lockupMauro Carvalho Chehab
From: Oleg Nesterov <oleg@tv-sign.ru> We are doing ->buf_prepare(buf) before adding buf to q->stream list. This means that videobuf_qbuf() should not try to re-add a STATE_PREPARED buffer. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-23m920x: move filter caps from device caps to adapter capsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move filter caps from device caps to adapter caps for the megasky driver. This fixes usb1.1 operation. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 23:04:44 +0000