summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2009-02-23ov772x: move configuration from start_capture() to set_fmt()Guennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> soc_camera framework requires, that camera configuration is performed in set_fmt, and start_capture and stop_capture only turn the camera on/off. This patch modifies ov772x to comply to this requirement. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov772x.c | 125 +++++++++++++++++++++--------------------- 1 files changed, 62 insertions(+), 63 deletions(-)
2009-02-23soc-camera: add data signal polarity flags to driversGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> All soc-camera camera and host drivers must specify supported data signal polarity, after all drivers are fixed, we'll add a suitable test to soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- arch/sh/boards/board-ap325rxa.c | 3 ++- arch/sh/boards/mach-migor/setup.c | 5 +++-- drivers/media/video/mt9m001.c | 2 +- drivers/media/video/mt9m111.c | 2 +- drivers/media/video/mt9v022.c | 2 +- drivers/media/video/ov772x.c | 2 +- drivers/media/video/pxa_camera.c | 1 + 7 files changed, 10 insertions(+), 7 deletions(-)
2009-02-23[PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cardsPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> With (some) Technisat cards you cannot run multiple DVB applications in parallel and switch the channel at the same time. There seems to be a problem on the interfaces or even inside the flexcop-device that can't handle interruption on the streaming interface. This patch adds a watchdog to check whether data is supposed to come in (streaming PIDs are requested) and if no data is seen within 400ms (default) it resets the streaming/pid-filtering hardware. This patch is urgently needed to support the rev 2.8 of the hardware and solves problem occassionally seen on older hardware. Priority: high Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2009-02-21cx18: Disable AC3 controls as the firmware doesn't support AC3Andy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-21cx18: Increment version number due to significant changes for v4l2_subdevsAndy Walls
From: Andy Walls <awalls@radix.net> Driver is now at version 1.1.0. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-21cx18: Get rid of unused variables related to video outputAndy Walls
From: Andy Walls <awalls@radix.net> Remove variables that were holdovers from ivtv for supporting the CX23415 MPEG decoder output. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-21cx18: Change log lines for internal subdevs and fix tveeprom readsAndy Walls
From: Andy Walls <awalls@radix.net> Give messages originating from internal subdevs a header using the subdev's name. Fixed an uninitialized variable problem with reading the EEPROM, noticed from log output. Got rid of the unused cx18_av_exit() function. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-21cx18: Fix a memory leak of buffers used for sliced VBI insertionAndy Walls
From: Andy Walls <awalls@radix.net> We leaked buffers every time a device was removed, if the user had enabled sliced VBI insertion into the MPEG stream. MythTV uses that. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-21v4l2-common: remove v4l2_ctrl_query_fill_stdHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The v4l2_ctrl_query_fill_std() function wasn't one the best idea I ever had. It doesn't add anything valuable that cannot be expressed equally well with v4l2_ctrl_query_fill and only adds overhead. Replace it with v4l2_ctrl_query_fill() everywhere it is used and remove it from v4l2_common.c. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-21cx18: Convert GPIO connected functions to act as v4l2_subdevicesAndy Walls
From: Andy Walls <awalls@radix.net> Convert GPIO line functions, such a audio routing and device resets, to v4l2_subdevices. This essentially completes the conversion of cx18 to the v4l2_device/v4l2_subdevice framework. No regression testing has taken place as of yet. Also an ivtv legacy bug with GPIO mux routing and going to/from radio mode was commented, but not fixed. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-21usbvision: convert to v4l2_device/v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-21v4l2-common: add v4l2_i2c_subdev_addr()Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add small function to retrieve the i2c address from a v4l2_subdev pointer. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-20cx18: Convert I2C devices to v4l2_subdevicesAndy Walls
From: Andy Walls <awalls@radix.net> This is a major perturbation to cx18 I2C device handling to convert it to the v4l2_device/subdeivce framework. This change breaks GPIO audio multiplexer control for the time being. It will be fixed in a coming change. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-20zoran: increase bufsize to a value suitable for 768x576.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-20zoran: s_jpegcomp should return a proper result, not 0.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-20v4l2-common/v4l2-spec: support/document write-only and button controlsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The controls V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET changed their type to button controls (these are unused at the moment, so this is a safe change). The controls V4L2_CID_PAN_RELATIVE, V4L2_CID_TILT_RELATIVE, V4L2_CID_FOCUS_RELATIVE and V4L2_CID_ZOOM_RELATIVE are marked as write-only controls. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-02-20v4l2: add colorfx support to v4l2-common.c, and add to 'Changes' in spec.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19zoran i2c modules: remove i2c autoprobing support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Zoran doesn't do autoprobing anymore, so remove support for this from the i2c modules. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19v4l-dvb: cleanup obsolete references to v4l1 headers.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19zoran: convert to v4l2_device/v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19gspca - zc3xx: Bad probe of the ov7630c sensor.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> This patch fixes an other bug of the kernel bug report 12737. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-19gspca - zc3xx: Bad probe of the ov7xxx sensors.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> This patch fixes one bug of the kernel bug report 12737. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-19gspca - sonixj: Handle the webcam 0c45:613c instead of sn9c102.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-19adv7175: convert to v4l2-subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19adv7170: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19vpx3220: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19em28xx: register device to soundcard for sysfsMauro Carvalho Chehab
From: Nicola Soranzo <nsoranzo@tiscali.it> As explained in "Writing an ALSA driver" (T. Iwai), audio drivers should set the struct device for the card before registering the card instance. This will add the correct /sys/class/sound/cardN/device symlink, so HAL can see the device and ConsoleKit sets its ACL permissions for the logged-in user. For em28xx audio capture cards found e.g. in Hauppauge WinTV-HVR-900 (R2), this patch fixes errors like: ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card Error opening audio: Permission denied when running mplayer as a normal user. Priority: normal Signed-off-by: Nicola Soranzo <nsoranzo@tiscali.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-19saa7185: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19saa7110: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19ks0127: add supported ks0127 variants to the i2c device list.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19ks0127: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19bt856: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19bt819: that delay include is needed after all.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Thanks to Jean Delvare for pointing this out. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19bt819: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-23soc-camera: fix S_CROP breakage on PXA and SuperHGuennadi Liakhovetski
From: Guennadi Liakhovetski <lyakh@axis700.grange> Recent format-negotiation patches caused S_CROP breakage in pxa_camera.c and sh_mobile_ceu_camera.c drivers, fix it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/pxa_camera.c | 26 +++++++++++++------------- drivers/media/video/sh_mobile_ceu_camera.c | 13 +++++-------- 2 files changed, 18 insertions(+), 21 deletions(-)
2009-02-19bt866: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: TRY_FMT and S_FMT now do the same parameter checks.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: change buffer defaults to something that works with tvtimeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> By popular request increased the default number and size of the buffers to something that tvtime likes. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: clean up some old V4L1 left-overs and remove the MAP_NR macro.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran et al: convert zoran i2c modules to V4L2.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The zoran i2c modules were still using V4L1 internally. Replace this with V4L2. Also deleted saa7111.c and saa7114.c, we use saa7115.c instead. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: if reqbufs is called with count == 0, do a streamoff.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> count == 0 has a special meaning, implement this. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: fix G_FMTHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Returned height was really height / 2. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: fix TRY_FMT supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Actually try to turn the format into something usable rather than just rejecting it if it isn't perfect. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: cleanups in an attempt to make the source a bit more readable.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: set correct parent of the video device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: remove old V4L1 ioctls, use v4l1-compat instead.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: set bytesperline to 0 when using MJPEG.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remove bogus check on bytesperline in the try_fmt_vid_out call. Just set it to 0. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: fix field typo.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: use slider flag with volume etc. controls.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-18zoran: remove broken BIGPHYS_AREA and BUZ_HIMEM code, and allow for kmallocs ↵Hans Verkuil
> 128 kB From: Hans Verkuil <hverkuil@xs4all.nl> Remove memory allocation madness. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 20:36:58 +0000