summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2004-02-20check result of saa7146_wait_for_debi_done() in av7110_bootarm()Johannes Stezenbach
2004-02-20fix timeout bug on AMD64 in saa7146_wait_for_debi_done()Johannes Stezenbach
2004-02-16DVB_TDA1004X and DVB_NXT6000 do not depend on !STANDALONEJohannes Stezenbach
(i.e. no compile-time firmware image necessary) reported by Bernd Bartmann
2004-02-15- change AFC handling as suggested by Robert SchlabbachJohannes Stezenbach
- use bit 1 of the SYNC register for FE_HAS_SIGNAL
2004-02-15verbose-print AFC only if carrier has been recoveredJohannes Stezenbach
2004-02-13turn off ves1820 test output pins (don't know if this makesJohannes Stezenbach
any difference, but why have them turned on if nothing is connected to them?)
2004-02-10bail out early if booting the ARM failedJohannes Stezenbach
2004-02-10fix dvb_ringbuffer_read/write() buffer pointer bugJohannes Stezenbach
I'm deeply worried why a) this went unnoticed for so long, and b) why I don't see any improvement after this fix. Something strange is going on here :-(
2004-02-09fixed typoHolger Waechtler
2004-02-07gcc-3.5 compatibilty patch from 2.6.3-rc1Johannes Stezenbach
2004-02-07fix tuning speed issueJohannes Stezenbach
2004-02-06add nxt6000 frontend driver to MakefilesJohannes Stezenbach
2004-02-04correct voffset for analog standard (looks better for me)Johannes Stezenbach
2004-02-03patch by Geert Uytterhoeven: Never include <asm/delay.h> directly.Johannes Stezenbach
2004-02-03Apply patch from Oliver Neukem that fixes:Alex Woods
this driver does DMA to the stack via usb_bulk_msg(). The patch is against Linus' BK tree and compiles.
2004-02-02- don't free resources while spinlock is held (might sleep)Michael Hunold
2004-02-02- release resources for video overlay properly, don't rely on VIDIOC_OVERLAY(0)Michael Hunold
2004-01-31- replace usage of sleep_on_...() here, tooMichael Hunold
(tested with 2.4, needs testing with 2.6)
2004-01-31- add wait_event_interruptible_timeout() macro to dvb-compat.hMichael Hunold
- replace usage of sleep_on_interruptible_timeout() with wait_event_interruptible_timeout()
2004-01-30Standardised where the firmware should be.Andrew de Quincy
2004-01-30- fix NET_GET_IF Oops on 2.6.xJohannes Stezenbach
- do less error checking for incoming MPE sections (some ISPs set reserved bits and the current/next indicator wrong)
2004-01-29Changed to use full i2c reads in probing instead of i2c pings to beAndrew de Quincy
compatable with ttusb
2004-01-29Fixed i2c code to detect nearly all errorsAndrew de Quincy
Added "V 2.1" to prevent warning message on driver load Some printks turned into dprintks
2004-01-29bugfix by Robert Cook: FE_RESET did the same as FE_INIT, thus invalidatingAndreas Oberritter
current channel settings on FE_RESET
2004-01-29fix check_firmware() error message ("dpram" -> "root")Johannes Stezenbach
2004-01-28Need to re-invert inversion for tda10046 in get_fe()Andrew de Quincy
2004-01-28Now resets chip before uploading firmwareAndrew de Quincy
2004-01-28Had to split firmware upload off from frontend init... the initial tune attemptAndrew de Quincy
was taking too long. Also, provided explanation of tuner frequency calculations.
2004-01-27Fixed frequency calculation.. realised its exactly the same as theAndrew de Quincy
tda10045h one!
2004-01-27Fixed signal strength reading for tda10046hAndrew de Quincy
2004-01-27Removed __initdata. It is now possible in kernel 2.6 to compile theAndrew de Quincy
DVB drivers into a monolithic kernel. In which case, the USB firmware will be discarded erroneously.
2004-01-27Updated descriptionAndrew de Quincy
2004-01-27Small tweaks. Better inversion handling, and changed how 6MHz is set inAndrew de Quincy
tuner
2004-01-27Forgot to make sure inversion was on for TDA10046HAndrew de Quincy
2004-01-27Implemented tda10046h driverAndrew de Quincy
2004-01-27Renamed two functions.Roberto Ragusa
Deleted spurious spaces.
2004-01-27- follow changes in 2.6.2-rc2 for non-dvb stuffMichael Hunold
2004-01-26- don't try to disable video overlay if it wasn't enabled beforeMichael Hunold
(bug catched by new resource management)
2004-01-26- make sure to disable clipping before capturing, otherwise capturing mayMichael Hunold
not work - make sure to disable the right video dma at capture stop
2004-01-26don't send zero-byte messages when probing the PLL typeHolger Waechtler
2004-01-25#include <linux/version.h> so it builds with linux-2.6.2-rc1Johannes Stezenbach
2004-01-25use {min,max}_t instead of home-brewed my_{min,max} macros. ↵Michael Hunold
straight-forward. patch compiles, and tested. (from Eugene Teo <eugene.teo@eugeneteo.net>)
2004-01-23- spelling fix: aquire -> acquireMichael Hunold
2004-01-22- always compile before commit...Michael Hunold
2004-01-22- backfeed from Linux kernel bitkeeper repository. can't really commentMichael Hunold
on this, it compiled fine for me. [TTUSB]: ttusb_dec.c needs linux/init.h # This patch includes the following deltas: # ChangeSet 1.1569.1.1 -> 1.1569.1.2 # drivers/media/dvb/ttusb-dec/ttusb_dec.c 1.10 -> 1.11 # ttusb_dec.c | 1 + 1 files changed, 1 insertion(+)
2004-01-22- don't allocate ARM_PACKET_SIZE (= 4096(!) bytes) on the stack, useMichael Hunold
kmalloc() instead (found by Dave Jones on lkml, Alex please review)
2004-01-21Fix compile for kernels < 2.4.20Alex Woods
2004-01-20- some more compatiblity cruft to make the driver compile down toMichael Hunold
2.4.19 (except usb stuff which only compiles with 2.4.20 and above)
2004-01-20add a note that says that the CI of the budget-CI card is notJohannes Stezenbach
actually supported by the budget-CI driver
2004-01-19Check for presence of crc32 function.Alex Woods
Make unknown types of packet less likely to cause packet loss.