summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2007-08-31tuner: use get_rf_strength instead of get_status to determine signal strengthMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-31tda8290: add get_rf_strength and improve status reading efficiencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-31tea5767: add get_rf_strength and improve status reading efficiencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-31tea5761: add get_rf_strength and improve status reading efficiencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-31tuner-simple: add get_rf_strength and improve status reading efficiencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-30dvb_frontend: add get_rf_strength function pointer to dvb_tuner_opsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add get_rf_strength function pointer to dvb_tuner_ops, so that rf signal strength can be read directly from the tuner driver by the dvb demodulator driver and / or the analog tuning system. This is an internal api addition -- userspace is not affected. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Manu Abraham <manu@linuxtv.org>
2007-08-29merge: http://linuxtv.org/hg/~mkrufky/tuner-refactor-phase-1Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-27tuner: alter build to produce separate modulesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Break tuner.ko into separate modules. This was a quick change - Tuner sub-drivers are still static-linked to tuner.ko, this will change after using dvb_attach and removing the probing functions. After this change, one can deselect undesired tuner sub-drivers via Kconfig. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-27tuner-simple: convert from tuner sub-driver into dvb_frontend moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-27tea5767: convert from tuner sub-driver into dvb_frontend moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com>
2007-08-27tea5761: convert from tuner sub-driver into dvb_frontend moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com>
2007-08-27mt20xx: convert from tuner sub-driver into dvb_frontend moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-27tda8290: convert from tuner sub-driver into dvb_frontend moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-27whitespace cleanup: replace leading spaces with tabsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> There were many instances of 7-space indents spread throughout the v4l-dvb tree. This patch replaces the 7-space indents with tabs. The whitespace cleaner script doesn't catch these, because it assumes that all indents are 8-space. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-28cx25840: add a few 10 microsecond delaysHans Verkuil
From: Tyler Trafford <ttrafford@gmail.com> There were a couple of places in the cx25840 initialization where the datasheet called for a 10 microsecond delay, which we ignored because of the 10 usec I2C delay. Put them in anyway now that the I2C delay was decreased to 5 usec. Signed-off-by: Tyler Trafford <ttrafford@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtv: move ivtv.h public header to include/linux.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-28ivtvfb: fix an obvious bug in ivtvfb_release_buffers()Hans Verkuil
From: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-28ivtvfb: replace ivtv_fb prefix to ivtvfb, change warning to info message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtvfb: rename some missed ivtv-fb references to ivtvfb.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtvfb: renamed ivtv-fb to ivtvfb, move header to include/linuxHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The convention for framebuffer devices is to call them xxxfb, not xxx-fb. Conform to this. Also move the ivtvfb.h header to include/linux: it is a public header. The FBIO_WAITFORVSYNC ioctl is now also defined in the ivtvfb.h header, no more need to include matroxfb.h for just this ioctl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtv-fb: add missing FBIO_WAITFORVSYNC ioctl defineHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv: finish VBI related cleanup.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv: VBI cleanups and fixesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Besides some VBI cleanups this patch also fixes a subtle problem with the VBI re-insertion stream where the PIO work handler wasn't called quickly enough, resulting in occasional corrupt data. Furthermore the CC output didn't disable CC correctly and at the right time, causing duplicates to be sent. An saa7127 fix for VPS output was also added: the wrong data was sent. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv/ivtv-fb: improve locking to prevent ivtv/ivtv-fb initialization problems.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-27merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-27Fix a warning when compiling on x86_64Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> tcm825x.c: In function 'ioctl_try_fmt_cap': tcm825x.c:639: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-27merge: http://linuxtv.org/hg/~hverkuil/v4l-dvb-pixfmtMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-26ivtv: udelay for the i2c bus was set too highHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An udelay of 5 is sufficient for standard speed i2c busses, 10 make it too slow. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26cx25840: use a workqueue to load the firmwareHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Loading the firmware using the i2c bit-banging code blocks the kernel. Move the firmware load code into a workqueue so that it plays well with other processes. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv: use new videodev2.h pixel formatsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25dvb_frontend: clean-up shutdown handlingOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Now dvb_powerdown_on_sleep controls whether - whether LNB power is turned off - whether the tuner/frontend enters sleep mode Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-25dvb_frontend: Default for dvb_shutdown_timeout set to 0Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Default for dvb_shutdown_timeout set to 0. dvb_shutdown_timeout > 0 is used for debugging only. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-25dvb_frontend: ts_bus_ctrl() handling fixedOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> ts_bus_ctrl() should only be called by - the first open - the last release call. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-25dvb_ca_en50221: decrement module use count on errorOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> decrement module use count on error Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-25dvb_ca_en50221: return correct error code valueOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> return correct error code value Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-25[PATCH 24/30] dvb: remove some unneeded vmalloc() return value casts from av7110Oliver Endriss
From: Jesper Juhl <jesper.juhl@gmail.com> vmalloc() returns void * - no need to cast it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-24merge: http://linuxtv.org/hg/~mkrufky/pendingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-24merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-24ivtv: kzalloc() returns void pointer, no need to castHans Verkuil
From: Jesper Juhl <jesper.juhl@gmail.com> Since kzalloc() returns a void pointer, we don't need to cast the return value in drivers/media/video/ivtv/ivtv-queue.c Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23cx88-alsa: Fix mmap supportTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The driver has long claimed to support mmap, but it didn't work at all. Some of the dma buffer parameters weren't set, and since video_buf uses vmalloc to allocate the buffer, a page callback is needed too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-23cx88-alsa: Eliminate snd_cx88_cardsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The driver kepts a static global array of snd_card pointers for each card probed, which was never used. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-23cx88-alsa: Rework buffer handlingTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Rework the way the DMA buffer is handled and IRQs are generated. ALSA uses a ring-buffer of multiple periods. Each period is supposed to corrispond to one IRQ. The existing driver was generating one interrupt per ring-buffer, as opposed to per period. This meant that as soon as the IRQ was generated, the hardware was already starting to re-write the beginning of the buffer. Since the DMA happens on a per-line basis, there was only a narrow window to copy the data out before the buffer was overwritten. The cx88 core RISC program generator is modified so that it can set the IRQ and counter flags to count every X lines of DMA transfer. This way we can generate an interrupt every period instead of every full ring-buffer. Right now only period of one line are supported, but it should be possible to support longer periods. Note that a WRITE instruction generates an IRQ when it starts, not when the transfer is finished. Thus to generate an IRQ when line X is done, one must set the IRQ flag on the instruction that starts line X+1, not the one that ends line X. Change the line size so that there are four lines in the SRAM FIFO. If there are not four lines, the analog output from the cx88's internal DACs is full of clicks and pops. Try to handle FIFO sync errors. Sometimes the chip generates many of these errors before audio data starts. Up to 50 sync errors will be ignored and the counter reset. Have the IRQ handler save the RISC counter to the chip struct, and then have the pointer callback use this to calculate the pointer position. We could read the counter from the pointer callback, but sometimes the sync errors on start up cause the counter to go crazy. ALSA sees this and thinks there has been an overrun. The IRQ hander can avoid saving the counter position on sync errors. The chip "opened" flag wasn't necessary. ALSA won't try to open the same substream multiple times. Probably this code was cut&pasted from the bt87x driver, which has multiple sub-streams for one chip. Do error checking for the videobuf mapping functions. snd_card_cx88_runtime_free() is useless and can be deleted. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-23dvb_net: whitespace cleanupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Clean whitespace brain-damage caused by previous patch, "Fix a warning at dvb_net" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-24ivtv: set correct pixel format and alpha properties in VIDIOC_G_FBUFHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: fix V4L2_ENC_CMD_STOP_AT_GOP_END supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Support for V4L2_ENC_CMD_STOP_AT_GOP_END was broken. While the driver correctly waited for the card to capture until the GOP was complete, afterwards the driver buffers were just flushed instead of waiting for the application to read all the pending data. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: fix VIDIOC_G_ENC_INDEX flag handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong frame types were filled in: the B and P frame types were swapped. This bug also hid a second bug: when a capture is stopped a last entry is written into the pgm index buffer with internal type 0, denoting the end of the program. This entry wasn't ignored, instead it was accidentally returned to the caller as a P frame. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23From: Jean Delvare <khali@linux-fr.org>Mauro Carvalho Chehab
Subject: ivtv: Fix static structure initialization Date: Thu, 23 Aug 2007 19:32:26 +0200 Convert the initialization of ivtv_i2c_algo_template to C99-style. Otherwise a future change to struct i2c_algo_bit_data would break this code. Also declared that structure const - it's a template after all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23ivtv: more ivtv-driver.h cleanups.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: reorganized and cleanup ivtv structHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: more cleanups, merged ivtv-audio.c and ivtv-video.c into ivtv-routing.cHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 22:24:00 +0000