| Age | Commit message (Collapse) | Author |
|---|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Henk Vergonet <Henk.Vergonet@gmail.com>
Fixed one value and removed a duplicate in tda18271_cid_target[],
based on table 54 "CID_Target_map" in Rev.04 of the TDA18271HD datasheet.
Priority: normal
Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Henk Vergonet <Henk.Vergonet@gmail.com>
Update the tda18271c2_rf_tracking_filters_correction function to include
the modified temperature compensation calculatation formula as described
in Rev.04 of the TDA18271HD datasheet.
Priority: normal
Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Don't display "no agc configuration provided" unless DBG_ADV is set.
Fix comments in function, tda18271_agc. This config variable is not
for LNA configuration -- it is for external AGC configuration.
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Display function parameters, idx and len, in error log.
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
For the case of multiple tuner instances, ensure that non-default
configuration options are saved into the driver's state.
This resolves an issue where a configuration option may not be
carried into the driver if the analog side of a hybrid driver
initializes before the digital side.
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
minor cleanup: move small_i2c assignment to the state config block
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
For better readability, treat the low power standby mode configuration
as an output option feature configuration, and change it to a bitmask.
If left unconfigured, all features will remain enabled, just as the
default configuration was before these changes were introduced.
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Implements handler for EVIOCGKEYCODE/EVIOCSKEYCODE via adding two new callbacks
to the input device.
Since on dvb-usb a scan code has 16 bits, to fulfill rc5 standard codes, the default
getkeycode/setkeycode input methods would require the driver to spend up to 64 Kb of
a sparse table. Instead, add two new callbacks to the event device.
With this, it is now possible to replace the keycode tables. There are, however, a few
implementation details at the current patch:
1) It will replace the existing device keytable, instead of creating an instance
of the data. This works. However, if two devices pointing to the same table
were connected, changing the IR table of one will also change the IR table for
the other (the solution for this one is simple: just kmalloc some memory);
2) In order to change the scan code, you need first to change the key to
KEY_RESERVED or KEY_UNKNOWN to free some space at the table (solution: allocate
some additional space for newer scan codes or allow dynamic table grow);
3) The table size cannot be extended. It would be easy to allow the table to
grow dynamically: just calling kmalloc(size+1); kfree(old). Yet, maybe we can
just create a bigger table with a fixed size, like for example a table with 128
entries. This should be enough even for a very big IR.
The current issues should be addressed on a later patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
In order to be closer to V4L IR implementation, it is needed to replace
u8 custom, data
to:
u16 scan
This allows using non-rc5 mappings, like the 8 bit keycodes used on older
protocols. It will also allow future implementations of rc6 keystrokes
when needed.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode.
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
SAA7164: Minor i2c assignment cleanup
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
SAA7164: Remove meaningless if'0 code
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, V4L uses a scancode table whose index is the scancode and
the value is the keycode. While this works, it has some drawbacks:
1) It requires that the scancode to be at the range 00-7f;
2) keycodes should be masked on 7 bits in order for it to work;
3) due to the 7 bits approach, sometimes it is not possible to replace
the default keyboard to another one with a different encoding rule;
4) it is different than what is done with dvb-usb approach;
5) it requires a typedef for it to work. This is not a recommended
Linux CodingStyle.
This patch is part of a larger series of IR changes. It basically
replaces the IR_KEYTAB_TYPE tables by a structured table:
struct ir_scancode {
u16 scancode;
u32 keycode;
};
This is very close to what dvb does. So, a further integration with DVB
code will be easy.
While we've changed the tables, for now, the IR keycode handling is still
based on the old approach.
The only notable effect is the redution of about 35% of the ir-common
module size:
text data bss dec hex filename
6721 29208 4 35933 8c5d old/ir-common.ko
5756 18040 4 23800 5cf8 new/ir-common.ko
In thesis, we could be using above u8 for scancode, reducing even more the size
of the module, but defining it as u16 is more convenient, since, on dvb, each
scancode has up to 16 bits, and we currently have a few troubles with rc5, as their
scancodes are defined with more than 8 bits.
This patch itself shouldn't be doing any functional changes.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Eugene Yudin <eugene.yudin@gmail.com>
This patch add support for RoverMedia TV Link Pro FM (LR138 REV:I) card
based on saa7134.
Priority: normal
Signed-off-by: Eugene Yudin <Eugene.Yudin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Add new standby mode:
TDA18271_STANDBY_LT_ON = slave tuner output loop thru on w/ xtal osc off
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
Ensure that by default all tuners are set correctly to master/slave mode.
For all HVR2250's, ensure slave based tuners are caliberated during attach
to avoid locking problems on tuner# above channel 91.
HVR2200 tuner attach time to be reviewed in a future patch.
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
El Miércoles, 5 de Agosto de 2009, Stefan Lippers-Hollmann escribió:
> Hi
>
> Connecting my TerraTec Cinergy T USB XE rev. 2 (0x0ccd, 0x0069) to kernel
> 2.6.31-rc5-git3, I get following kernel oops (complete dmesg and kernel
> config (amd64) attached) while the firmware[1] is uploaded to the device.
>
> This is a regression relative to 2.6.30.x, where this device is working
> fine. It also seems to be restricted to dvb_usb_af9015, as firmwares for
> several wlan cards are uploading fine. Would it help to bisect based on
> the changes to drivers/media/dvb/dvb-usb/af9015.c or is a wider scope
> required?
>
> Regards
> Stefan Lippers-Hollmann
>
> [1] http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmwar
>e_files/4.95.0/dvb-usb-af9015.fw
>
> usb 1-2: new high speed USB device using ehci_hcd and address 4
> usb 1-2: New USB device found, idVendor=0ccd, idProduct=0069
> usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 1-2: Product: Cinergy T USB XE Ver.2
> usb 1-2: Manufacturer: TerraTec
> usb 1-2: SerialNumber: 10012007
> usb 1-2: configuration #1 chosen from 1 choice
> dvb-usb: found a 'TerraTec Cinergy T USB XE' in cold state, will try to
> load a firmware usb 1-2: firmware: requesting dvb-usb-af9015.fw
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> BUG: unable to handle kernel paging request at ffffc9000db5ee17
> IP: [<ffffffff811d173b>] memcpy_c+0xb/0x20
> PGD 22fc07067 PUD 22fc14067 PMD 1a091b067 PTE 800000020d5fd161
> Oops: 0003 [#1] PREEMPT SMP
> last sysfs file:
> /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/firmware/1-2/loading CPU 0
> Modules linked in: dvb_usb_af9015(+) dvb_usb dvb_core radeon drm bnep sco
> rfcomm l2cap bluetooth ppdev parport_pc lp parport acpi_cpufreq
> cpufreq_conservative cpufreq_stats cpufreq_ondemand freq_table
> cpufreq_performance cpufreq_powersave kvm_intel kvm ipv6 af_packet bridge
> stp snd_hda_codec_atihdmi rt2800usb snd_hda_codec_realtek zd1211rw
> rt2x00usb snd_hda_intel snd_hda_codec rt2x00lib input_polldev crc_ccitt
> snd_hwdep arc4 ath9k ecb snd_pcm b43 ath snd_seq snd_timer rng_core
> snd_seq_device mac80211 cfg80211 evdev snd rtc_cmos rtc_core soundcore
> rtc_lib pcspkr rfkill snd_page_alloc i2c_i801 processor led_class i2c_core
> button ext4 mbcache jbd2 crc16 dm_mirror dm_region_hash dm_log dm_snapshot
> dm_mod sg sr_mod sd_mod cdrom usbhid hid uhci_hcd ahci ssb firewire_ohci
> pcmcia firewire_core libata pcmcia_core crc_itu_t scsi_mod r8169 ehci_hcd
> mii usbcore nls_base intel_agp thermal fan Pid: 18663, comm: modprobe Not
> tainted 2.6.31-rc5-sidux-amd64 #1 EP45-DS3 RIP: 0010:[<ffffffff811d173b>]
> [<ffffffff811d173b>] memcpy_c+0xb/0x20 RSP: 0018:ffff880221185b50 EFLAGS:
> 00010202
> RAX: ffffc9000db5ee17 RBX: ffff880221185c18 RCX: 0000000000000002
> RDX: 0000000000000002 RSI: ffff880221185b6a RDI: ffffc9000db5ee17
> RBP: 0000000000000000 R08: ffff8800280442a0 R09: 0000000000000001
> R10: ffff8800378010c0 R11: ffffffff810284b0 R12: 0000000000000008
> R13: ffff880221185b68 R14: ffff880221179800 R15: ffff880221185bb4
> FS: 00007f7f1d4286f0(0000) GS:ffff880028034000(0000)
> knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: ffffc9000db5ee17 CR3: 00000001e21ec000 CR4: 00000000000026e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process modprobe (pid: 18663, threadinfo ffff880221184000, task
> ffff88021f0393e0) Stack:
> ffffffffa060b2ad ffffffffa060f220 00ff880221179800 0f002f4b88d0002b
> <0> 004500088673e9ea 0d13c9141c915e02 06803e010101fb08 0c800cc012007d40
> <0> bb800cc01200fa80 010000a000006480 ff02010202020102 ffff8802260823c0
> Call Trace:
> [<ffffffffa060b2ad>] ? af9015_rw_udev+0x24d/0x2d0 [dvb_usb_af9015]
> [<ffffffffa060b91b>] ? af9015_download_firmware+0x12b/0x190
> [dvb_usb_af9015] [<ffffffffa0604334>] ? dvb_usb_download_firmware+0x94/0xe0
> [dvb_usb] [<ffffffffa0604669>] ? dvb_usb_device_init+0x179/0x700 [dvb_usb]
> [<ffffffffa060c3ff>] ? af9015_usb_probe+0x12f/0xbf4 [dvb_usb_af9015]
> [<ffffffffa002e0a7>] ? usb_probe_interface+0xb7/0x190 [usbcore]
> [<ffffffff8126b5c8>] ? driver_probe_device+0x98/0x1b0
> [<ffffffff8126b773>] ? __driver_attach+0x93/0xa0
> [<ffffffff8126b6e0>] ? __driver_attach+0x0/0xa0
> [<ffffffff8126ad58>] ? bus_for_each_dev+0x58/0x80
> [<ffffffff8126a648>] ? bus_add_driver+0x268/0x2f0
> [<ffffffff8126ba69>] ? driver_register+0x79/0x170
> [<ffffffffa002de09>] ? usb_register_driver+0xa9/0x120 [usbcore]
> [<ffffffffa0063000>] ? af9015_usb_module_init+0x0/0x37 [dvb_usb_af9015]
> [<ffffffffa006301b>] ? af9015_usb_module_init+0x1b/0x37 [dvb_usb_af9015]
> [<ffffffff8100a04b>] ? do_one_initcall+0x3b/0x180
> [<ffffffff811cd8b1>] ? __up_read+0x21/0xc0
> [<ffffffff81072585>] ? __blocking_notifier_call_chain+0x65/0x90
> [<ffffffff81085618>] ? sys_init_module+0xe8/0x240
> [<ffffffff81011fc2>] ? system_call_fastpath+0x16/0x1b
> Code: 81 ea d8 1f 00 00 48 3b 42 20 73 07 48 8b 50 f9 31 c0 c3 31 d2 48 c7
> c0 f2 ff ff ff c3 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48 a5 89
> d1 f3 a4 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP
> [<ffffffff811d173b>] memcpy_c+0xb/0x20
> RSP <ffff880221185b50>
> CR2: ffffc9000db5ee17
> ---[ end trace 605ab93fe7120203 ]---
I have the same problem with a recent v4l-dvb. The attached patch seem to
solve the problem.
Jose Alberto
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Dmitri Belimov <d.belimov@gmail.com>
Add support our new TV card based on xc5000 and saa7134.
Analog TV works well.
Priority: normal
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Stephane Marguet (Stemp) <smarguet@gmail.com>
Priority: normal
Signed-off-by: Stephane Marguet (Stemp) <smarguet@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Oldřich Jedlička <oldium.pro@seznam.cz>
The patch introduces new snd_saa7134_capsrc_set (code taken from
snd_saa7134_capsrc_put) that updates also the ALSA capture controls during
snd_card_saa7134_capture_prepare and snd_saa7134_capsrc_put.
There can be much more work done in order to unify the control of the card
(now the card's capture source is tuned/switched in saa7134-video.c too), but
I don't have enough time. This work could be a starting point, but it can be
applied as-is too (it doesn't need any further work to make it working).
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Hello kernel developers.
I found a bug report from an user in launchpad. I just copy it here. It
includes patch.
I don't own the necessary hardware to test it but the patch looks
trivial.
I'm not subscribed to this list, so please CC me. Thanks!
Here is the text:
"""
remote control for my tv card doesnt work
I have Askey CPH03x TV Capturer.
When I load bttv module with "card=59" option which is proper for this
tv card,
I can watch tv with sound but my remote control doesnt work. There is no
ir
event in /proc/bus/input/device .
When bttv module is loaded with "card=137" option remote control works
very
well.
$ cat /proc/bus/input/devices
.......
........
: Bus=0001 Vendor=109e Product=0350 Version=0001
N: Name="bttv IR (card=137)"
P: Phys=pci-0000:00:0d.0/ir0
S: Sysfs=/devices/pci0000:00/0000:00:0d.0/input/input144
U: Uniq=
H: Handlers=kbd event6
B: EV=100003
B: KEY=2c0814 100004 0 0 0 4 2008000 2090 2001 1e0000 4400 0 ffc
Unfortunately there is no sound.
"""
https://bugs.launchpad.net/ubuntu/+bug/239733
http://bugzilla.kernel.org/show_bug.cgi?id=11995
--
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Patrick Boettcher <pboettcher@dibcom.fr>
This patch is fixing the initialization of the channel search parameters.
Priority: normal
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
|
|
From: Hans de Goede <hdegoede@redhat.com>
gspca_mr97310a: Use correct register for CIF type 1 sensor gain settings
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Patrick Boettcher <pboettcher@dibcom.fr>
This patchs adds support for the DiB8000 based devices STK807xP and
STK807xPVR to the dib0700-device-tree.
Priority: normal
Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
|
|
From: Patrick Boettcher <pboettcher@dibcom.fr>
This commit adds support for the DiB8000 ISDB-T demodulator made by DiBcom.
Priority: normal
Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
|
|
From: Patrick Boettcher <pboettcher@kernellabs.com>
In order to follow a little bit the kernel coding style from now on
after the generation of that driver file and indent -linux call is
emitted.
Priority: normal
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
gspca_mr97310a: Add controls for CIF type 0 sensor cams
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
gspca_mr97310a: make the probing a bit less chatty
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
gspca_mr97310a: Move detection of CIF sensor type to probe() function,
so that the right controls are set to disabled from the start, rather then
having them disappear all of a sudden when the stream is started.
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
gspca_mr97310a: cleanup/fixup control handling
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdgoede@redhat.com>
gspca: mr97310a fix detection of sensortype for vivicam with id byte of 0x53
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Theodore Kilgore <kilgota@auburn.edu>
This patch adds supports for mr97310a camera's with CIF sensors (2 different
types) and for VGA mr97310a camera with a different sensor then supported
until now.
This patch also add support for controls for one of the 2 CIF sensors, this
was written by Thomas Kaiser <thomas@kaiser-linux.li>
Priority: normal
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Thomas Kaiser <thomas@kaiser-linux.li>
Signed-off-by: Hans de Goede <hdgoede@redhat.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
SAA7164: Removed spurious debug
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
In some cases we're seeing large timeouts on commands. I'm changing the
implementation so that the deferred worker checks the PCI bus for
any messages and signals the waiting caller accordingly. The previous
mechanism was too unreliable.
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
SAA7164: Removed a duplicate call to address any PCI quirks.
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
The firmware typically responds in < 50ms and, via the interrupts and
deferred work queue the caller (blocked in the driver) is signalled very
efficiently. In a highly stressed system this can take many multiples
of seconds. So, we need a larger maximum timeout for busy systems.
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
Cleanup a printk and output two helpful driver params in debug mode.
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: James A Webb <jamesawebb@gmail.com>
The card is reported as YUAN High-Tech Development Co., Ltd STK7700D
Priority: normal
[mchehab@redhat.com: fix merge conflicts and properly name USB PID]
Signed-off-by: James A Webb <jamesawebb@gmail.com>
CC: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Priority: high
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Priority: high
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Shrinks source and kernel object size a bit.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Henrik Kurelid <henke@kurelid.se>
applications tend to check the signal strength very often. This patch
enables users to select which AVC messages to log using a bitmask. In
addition, it also enables the possibility to debug application PMTs sent
to the driver. This will be usable since the CA support is still poorly
tested for lots of CAMs and CA systems.
Signed-off-by: Henrik Kurelid <henrik@kurelid.se>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Since we are not using v4l2_device_call_* calls any more, we don't need to
initialise subdevice .grp_id any more. This also fixes compiler warnings on
64-bit platforms.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/soc_camera.c | 1 -
drivers/media/video/soc_camera_platform.c | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
There are several IR's that were using IR to type a letter that it is
known by some random application. Instead, the better is to use
the standard definitions found at:
http://linuxtv.org/wiki/index.php/Remote_Controllers
And, if needed, submit a patch for the application to understand the
media keys.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
