summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2008-05-06merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-05xc5000: MEDIA_TUNER_XC5000 must select FW_LOADERMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix the following build error: drivers/built-in.o: In function `xc_load_fw_and_init_tuner': xc5000.c:(.text+0x2dacd): undefined reference to `request_firmware' xc5000.c:(.text+0x2daf0): undefined reference to `release_firmware' xc5000.c:(.text+0x2db85): undefined reference to `release_firmware' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-03tda18271: fix error handling in tda18271c2_rf_cal_init pathMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> fix error handling in tda18271c2_rf_cal_init immediate path Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-03tda18271: fix error handling in init and sleep pathsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-03dvb_ca_en50221: Fix High CPU load in 'top' due to budget_av slot pollingOliver Endriss
From: Robert Schedel <r.schedel@yahoo.de> This change addresses kernel bug #10459: In kernel 2.6.25 the budget_av driver polls for an CI slot in 100ms intervals (because no interrupt solution for budget_av cards is feasible due to HW reasons). If no CI/CAM is connected to the DVB card, polling times out only after 250ms. This periodic polling leads to high CPU load. The change increases the polling interval for empty slots from 100ms to 5s. Intervals for remaining slot states (invalid, in progress, ready) are unchanged, as they are either temporary conditions or no timeout should occur. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-05-02cx23885: remove remaining references to dvb-pllMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The cx23885 driver used to use dvb-pll for LG-TDVS-H064F support on the FusionHDTV5 Express. This has since been converted to use tuner-simple instead, once digital tuning support was added to tuner-simple. Since cx23885 no longer uses dvb-pll, remove the #include "dvb-pll.h", and the DVB_PLL Kconfig selection. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-02cx23885: update model matrix for Hauppauge WinTV HVR-1200 & WinTV HVR-1700Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-02cx23885: add missing subsystem ID for Hauppauge HVR-1200 OEMMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-01cx18/ivtv: improve and fix out-of-memory handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - don't show kernel backtrace when the allocation of the buffers fails: the normal ivtv/cx18 messages are clear enough and the backtrace scares users. - fix cleanup after the buffer allocation fails (caused kernel panic). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-01ivtv/cx18: fix compile warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix compile warnings if MODULE is not defined. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-01ivtv: prefix ivtv external functions with ivtv_Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix conflict with cx18 driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-28ivtv: POLLHUP must be returned on eof.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-28 fix SOC_CAMERA_MT9M001 build bugMauro Carvalho Chehab
From: Ingo Molnar <mingo@elte.hu> on latest -git, with this config: http://redhat.com/~mingo/misc/config-Mon_Apr_28_13_25_34_CEST_2008.bad CONFIG_SOC_CAMERA_MT9M001=y CONFIG_SOC_CAMERA_MT9V022=y # CONFIG_I2C is not set the build fails: drivers/built-in.o: In function `reg_read': mt9m001.c:(.text+0x140a87): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `reg_write': mt9m001.c:(.text+0x140b6e): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `reg_read': mt9v022.c:(.text+0x1413a7): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `reg_write': mt9v022.c:(.text+0x1414ce): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mt9m001_mod_init': mt9m001.c:(.init.text+0x158a8): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mt9v022_mod_init': mt9v022.c:(.init.text+0x158b8): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mt9m001_mod_exit': mt9m001.c:(.exit.text+0x1656): undefined reference to `i2c_del_driver' drivers/built-in.o: In function `mt9v022_mod_exit': mt9v022.c:(.exit.text+0x1666): undefined reference to `i2c_del_driver' adding the missing I2C dependency fixes it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-28 drivers/media/dvb/frontends/s5h1420.c: printk fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> drivers/media/dvb/frontends/s5h1420.c: In function `s5h1420_setsymbolrate': drivers/media/dvb/frontends/s5h1420.c:484: warning: long long unsigned int format, u64 arg (arg 2) We do not know what type the architecture uses for u64. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-27pvrusb2: Driver is no longer experimentalMike Isely
From: Mike Isely <isely@pobox.com> This driver has been in-kernel and reasonably stable for well over a year. It is in a stable form and is known to work well. Remove its experimental status. Signed-off-by: Mike Isely <isely@pobox.com>
2008-04-27pvrusb2-dvb: include dvb support by default and update Kconfig help textMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com>
2008-04-27pvrusb2: always enable support for OnAir Creator / HDTV USB2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This was a build option in the past, to avoid conflicts with the cxusb module for digital televsion support. Now that dtv mode support has been merged into pvrusb2, the OnAir devices are fully supported by this single module. This no longer should be a build option. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com>
2008-04-26pvrusb2-dvb: quiet down noise in kernel log for feed debugMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Get rid of the noise in dmesg during dvb feed changes, unless the appropriate debug trace flag is enabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Mike Isely <isely@pobox.com>
2008-04-26those kernel-sync didn't merged. Apply manuallyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26videobuf-core: backport brandon's patchMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> I and Brandon did similar patches. As Brandon patch where older, I've preserved his patch at -git. However, the patches weren't equal. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26backport changeset f000fd80937c0d94c67f9f3e7026f1fbc8ef8873Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Author: Jeff Garzik <jgarzik@redhat.com> [ALSA] Fix synchronize_irq() bugs, redundancies free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26backport commit d3135846f6c1858dbad6ccb780a42e6c98953e6dMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Author: Matthew Wilcox <matthew@wil.cx> drivers: Remove unnecessary inclusions of asm/semaphore.h None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26backported kernel changeset cbfa6f2a684e9fb7d6a5025b3893b8f93112683cMauro Carvalho Chehab
From: Tobias Klauser <tklauser@distanz.ch> DVB: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26A few CodingStyle fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26Remove dvb-core/KconfigMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Their contents were moved into drivers/media/Kconfig. Remove the uneeded Kconfig. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26Forgot to add those patches.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26Move other terrestrial tuners to common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Those tuners are currently used only under media/dvb. However, they can support also analog TV. Better to move them to the same place as the other hybrid tuners. This would make easier to use those tuners also by analog drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26reorganize some DVB-S Kconfig itemsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There are some DVB-S tuners together with DVB-S tags, while others together with tuners. Better to have all of them together. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Move tuners to common/tuners There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. This patch moves those common tuners into a common dir. It also moves saa7146 driver into drivers/media/video, where other hybrid drivers are placed. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26saa7134: add another PCI ID for Beholder M6Mauro Carvalho Chehab
From: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26Add support for Beholder BeholdTV H6Mauro Carvalho Chehab
From: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26ivtv: add tuner support for the AverMedia M116Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26saa7134: fix tuner setupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when saa7134 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from saa7134-i2c, moving it to the proper place, after taking eeprom into account. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26tuner-core: add a missing \n after a debug printkMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26ivtv: fix tuner detection for PAL-N/Nc.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: increase the DMA timeout from 100 to 300 ms.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When there is a lot of DMA traffic this timeout might sometimes be too low. Increase it to be on the safe side. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: increase version number to 1.2.1.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: fix oops when itv->speed == 0 and VIDEO_CMD_PLAY is called.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: add autodetect for the AVermedia M104 cardHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Note that this card is only detected and not yet working. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: use strlcpy instead of strcpy.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: add support for card comments and detected but unsupported cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: change initialization order to fix an oops when device registration ↵Hans Verkuil
failed. From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-25 ir-kbd-i2c: Save a temporary memory allocation in ir_probeMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> Using i2c_transfer instead of i2c_master_recv in ir_probe saves a temporary memory allocation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25 au0828/ cleanups and fixesMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch contains the following cleanups and fixes: - "debug" is definitely not a good name for a global variable, renamed it to "au0828_debug" this fixes a compile error with some kernel configurations - since the module parameter is int the variable shouldn't be unsigned - remove the {usb,bridge,i2c}_debug module parameters since they are already covered by the "debug" module parameter - remove the unused au0828_bcount - make the needlessly global i2c_scan static - make the needlessly global dvb_register() static Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26cx88: fix tuner setupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when cx88 registes I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from tuner-i2c, moving it to the proper place, after taking eeprom into account. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26tuner-core: some adjustments at tuner logs, if debug enabledMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> set_addr log were almost useless: discarded SET_TYPE_ADDR commands weren't reported. This patch changed set_addr printk to print a message only if set_addr is wrong. It also fix printk at set_type, since, if an attach were failing, nothing were reported. With the current code, working or not, a call to set_addr will produce a debug printk. also, set_type() were producing a false error message on tuner_xc2028, since it were requesting for setting a frequency on a place where firmware name weren't set yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://linuxtv.org/hg/~mkrufky/pvrusb2-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 05:22:06 +0000