summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2008-10-28Wait for a maximum of 100mSManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-28Fix: parameters not supplied in the search processManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-28Fix: Commit 9344 breaks tning of cx24123Manu Abraham
From: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-27Disable PLL Loop while tuningManu Abraham
From: Ales Jurik <ajurik@quick.cz> Signed-off-by: Ales Jurik <ajurik@quick.cz> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-27Port STB0899 and STB6100Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-07-09Miscellaneous fixesManu Abraham
- Fix a bitfield - Set gain appropriately - Slept for the wrong duration From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-07-09Fix runtime verbosityManu Abraham
From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-05-28Bug: Fix incorrect Register definitionsManu Abraham
Thanks to Robert Schlabbach <robert_s@gmx.net> for pointing this out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-05-27Fix incorrect IF_AGC Bitfield definitionManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Remove unreferenced deliveryManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-03-09Make delivery system standalone.Manu Abraham
Eventhough the delivery system is made standalone, DVBFE_SET_DELSYS needs to be set as the very first operation, for a multistandard frontend Splitting delivery system out as a new ioctl, makes things a bit more easier to understand. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-03-05Optimizations galore: Blistering barnacles! The KNC1 and friendsManu Abraham
like 90 Mhz clock much better rather than running at a higher throttle, for almost similar hardware. he exact cause unknown, possibly due to a lower voltage applied for the demod power supply. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Initialize SYSREG registerManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-03-01Code SimplificationManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-02-24We can now reduce the debug levels, just need to look at errors only.Manu Abraham
(Hope so) From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-02-24Bugfix: gate control needs to be handledManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-02-04Optimization, Fix a BugManu Abraham
* cut down some I/O operations by disabling "disable gate" * budget_av was left with the gate open, thereby more susceptible to RF interference due to I/O operations From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-27Select STB0899, STB6100, TDA8261 for budget_ci andManu Abraham
budget_av respectively. Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Cleanup: remove some superfluous stuff and dead commented out codeManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Fix a compile warningManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Cleanup/Optimization:Manu Abraham
* Fix compile warnings * The compile warnings helped to identify 2 unnecessary I/O operations From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Fix invalid GCT modeManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Bug! F/3 Clock domain was incorrectly usedManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Code Review: #4 Consolidate configurationsManu Abraham
* Better readability * Avoids duplication Comments from Oliver Endriss <o.endriss@gmx.de> From: Manu Abraham <manu@linuxtv.org> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-21Code Simplification: use do_div() insteadManu Abraham
From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-21Bug: a string which contains 4 digits needs an arrayManu Abraham
of size 5. The fifth character will hold the terminating '\0' From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-21Optimization: Round the requested value to achieve aManu Abraham
+/-1MHz error instead of +0/-2MHz From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-19Bug Fix an overflow in bandwidth calculationManu Abraham
From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-18Bug: Bandwidth calculation at upper and lower boundariesManu Abraham
From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-18Initialize post process events to NULLManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-18Bug: Bandwidth calculationManu Abraham
Bug #1: The 5 tap equaliser is set to correct simple perturbations like reflections on the IF cable for DVB-S. In the case of DVB-S2 a more powerful equalizer is used to correct the filter group delay allowing the bandwidth to be reduced by a factor of 1/3 Bug #2: The ZIF tuner takes badwidth to be set in Hz From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-19Revert back previous change to 90MHzManu Abraham
Note: * At High Symbol Rates we do not have enouph machine cycles to handle the incoming symbols and hence might run into problems at the very end of the specified definition * Most of the equations have been calculated for a master clock of 99 MHz, running at 90MHz, raises lot of issues such as the need to recalculate all of them , which is eventually very painful. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-10Code simplification: clock is already initialized,Manu Abraham
no need to initialize again. Thanks to Marko Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <manu@linuxtv.org> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-10Bug in previous commitManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-10Bug! SFRL nibble got swappedManu Abraham
The Bug was found by Arvo Jarve <arvo@softshark.ee> It was a wonder how it worked in the case with this bug, STM verified this that this nibble was in fact insignificant and can be ignored. But still we need to fix all inconsistencies. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-10Bug! RTF is signedManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-01Disable Symbol rate auto scan featureManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-31Fix a typo in the previous commitManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-31Add post process interfacesManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Limit initial RF AGC gainManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Limit bandwidth with a 3dB response fallManu Abraham
In this case, we will be sure that there exists a carrier and the center frequency would be simply f1 - f2. In such a circumstance, the TR loop is simplified to doing a simple check for timing, rather than searching for the same. From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Increment the AGC1 and AGC2 gain respectively, improves sensitivity slightlyManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Bug ID #19: Diseqc works properly at 90MHz only on Cut 1.1 and 2.0Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30BUG! Setting CRL parameter overwrote the CR Algorithm type,Manu Abraham
eventually leading to wrong search algorithm to be employed in the DVB-S carrier loop optimization. Symptom: Once the CR optimization stage is passed either way, in a successful or failed manner, the very next carrier search will fail, due to no Carrier Search Algorithm specified. From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-25Add support for the Satelco Easywatch DVB-S2 PCI cardManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-24Fix: assignment of wrong valuesManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-19Code simplification: Sleep only for the required time interval.Manu Abraham
* Saves 70 mS LOCK time on the STB6100 based * Saves 100 mS LOCK time on the TDA8261 based From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18missing breakManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18Initialize at 90MHz itselfManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18Deviation from the reference, pullup is 12k insteadManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 21:30:10 +0000