summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2008-04-26ivtv: add tuner support for the AverMedia M116Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26saa7134: fix tuner setupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when saa7134 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from saa7134-i2c, moving it to the proper place, after taking eeprom into account. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26tuner-core: add a missing \n after a debug printkMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26ivtv: fix tuner detection for PAL-N/Nc.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: increase the DMA timeout from 100 to 300 ms.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When there is a lot of DMA traffic this timeout might sometimes be too low. Increase it to be on the safe side. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: increase version number to 1.2.1.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: fix oops when itv->speed == 0 and VIDEO_CMD_PLAY is called.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: add autodetect for the AVermedia M104 cardHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Note that this card is only detected and not yet working. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: use strlcpy instead of strcpy.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: add support for card comments and detected but unsupported cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: change initialization order to fix an oops when device registration ↵Hans Verkuil
failed. From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-25 ir-kbd-i2c: Save a temporary memory allocation in ir_probeMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> Using i2c_transfer instead of i2c_master_recv in ir_probe saves a temporary memory allocation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25 au0828/ cleanups and fixesMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch contains the following cleanups and fixes: - "debug" is definitely not a good name for a global variable, renamed it to "au0828_debug" this fixes a compile error with some kernel configurations - since the module parameter is int the variable shouldn't be unsigned - remove the {usb,bridge,i2c}_debug module parameters since they are already covered by the "debug" module parameter - remove the unused au0828_bcount - make the needlessly global i2c_scan static - make the needlessly global dvb_register() static Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26cx88: fix tuner setupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when cx88 registes I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from tuner-i2c, moving it to the proper place, after taking eeprom into account. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26tuner-core: some adjustments at tuner logs, if debug enabledMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> set_addr log were almost useless: discarded SET_TYPE_ADDR commands weren't reported. This patch changed set_addr printk to print a message only if set_addr is wrong. It also fix printk at set_type, since, if an attach were failing, nothing were reported. With the current code, working or not, a call to set_addr will produce a debug printk. also, set_type() were producing a false error message on tuner_xc2028, since it were requesting for setting a frequency on a place where firmware name weren't set yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://linuxtv.org/hg/~mkrufky/pvrusb2-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 751xxMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-24cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modes.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The S5H1411 demodulator is now enabled. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-24s5h1411: Adding support for this ATSC/QAM demodulatorSteven Toth
From: Steven Toth <stoth@hauppauge.com> This adds full support for this demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-24pvrusb2: make signed one-bit bitfields unsignedMike Isely
From: Harvey Harrison <harvey.harrison@gmail.com> Single-bit signed bitfields can only take 0/-1 rather than 0/1 as the drivers seems to assume...add unsigned. Noticed by sparse: drivers/media/video/pvrusb2/pvrusb2-devattr.h:107:34: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:114:37: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:117:30: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:120:23: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:124:24: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:128:23: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:138:36: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:143:24: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:144:28: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:145:26: error: dubious one-bit signed bitfield drivers/media/video/pvrusb2/pvrusb2-devattr.h:146:23: error: dubious one-bit signed bitfield Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mike Isely <isely@pobox.com>
2008-04-25 tuner-xc2028.c dubious !x & yMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25 mt312.h: dubious one-bit signed bitfieldMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Make it unsigned (0/1) rather than signed (0/-1). Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25 xc3028_{agc,bw}_config namespace fixMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch fixes the following build error: <-- snip --> ... LD drivers/media/built-in.o drivers/media/dvb/built-in.o:(.data+0x1be6c): multiple definition of `xc3028_agc_config' drivers/media/video/built-in.o:(.data+0x36500): first defined here drivers/media/dvb/built-in.o:(.data+0x1be9c): multiple definition of `xc3028_bw_config' drivers/media/video/built-in.o:(.data+0x36530): first defined here make[3]: *** [drivers/media/built-in.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24drx397xD: fix math usageMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The previous code were using a div64 math specific to i386. Replace for an asm-generic one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-18tuner-xc2028: use hybrid_tuner_request_stateMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Use a standard method to manage multiple instances of a hybrid tuner. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-18tuner: add macro, hybrid_tuner_report_instance_countMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Create a macro to report the number of instances of the tuner driver currently in use. This will allow drivers to perform specific cleanups before destroying the last instance of a tuner. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-16drivers/media/video: use time_before, time_before_eq, etcMauro Carvalho Chehab
From: Julia Lawall <julia@diku.dk> The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-16ir-common: Adds 3 missing IR keys for FlyVIdeo2000Mauro Carvalho Chehab
From: Ivan Bobyr <brefi@yandex.ru> The patch extends the default keymap of FlyVIdeo2000 IR remote control so that this remote may also serve movie & music players in a better way. I bought a SAA7130 TV tuner with a remote control having 3 additional button as the default layout, exactly as: 1) labeled "<<<" : key code 0x19, may be used as "backward"in MPlayer,XMMS etc 2) labeled ">>>" : key code 0x1f, may be used as "forward"... 3) not labeled : key code 0x0a, may be used as "pause"... Once have added these code definitions to the kernel, me got all these operations available for viewing movies & listening music. Signed-off-by : Ivan Bobyr <brefi@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-16 ibmcam: improve support for the IBM PC Camera ProMauro Carvalho Chehab
From: David Hilvert <dhilvert@gmail.com> This patch modifies Dmitri's original ibmcam driver for Linux to improve support for the IBM PC Camera Pro. It may also offer improved support for other models classified by the driver as 'Model 3', such as the IBM PC Camera Pro Max. See http://auricle.dyndns.org/xvp610/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-16zoran: v4l2_jpegcompression is being redefined inside zoran.hMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15 radio: use get/put_unaligned_* helpersMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15soc-camera: re-sync with -git treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The proper fix were applied at -git. Re-apply the missing parts with the new base. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15Fix build that occurs when CONFIG_VIDEO_PMS=y and VIDEO_V4L2_COMMON=mMauro Carvalho Chehab
This patch removes zoran checks for VIDEO_V4L2, since this API is always present, when V4L is selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15> Please, re-generate the affected V4L/DVB patches, without the PXA part. I'llMauro Carvalho Chehab
> keep those changes on hold, until I get a confirmation that the PXA side is > committed on mainstream. Reverted several changes on soc_camera From: Mauro Carvalho Chehab <mchehab@infradead.org> As asked by Guennadi: Mauro, please, drop commits 2f4a87873f13924871d7bb82e27d02d0e16fbe02 and 9b7d577c508e7765860e599c0e98d4ac3fbaa2aa from your tree and replace 5f1e5244ee6b9f139a262d5e7a930a41488afbbe with the version below. Due to that change, that happened on v4l-dvb -git tree, several patches broke. This patch reverts all broken stuff, keeping this tree in sync with v4l-dvb -git tree. I'm waiting for Guennadi to fix the broken patches and ask me to pull them again. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-10 proc: switch /proc/driver/radio-typhoon to seq_file interfaceMauro Carvalho Chehab
From: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15 soc-camera: Remove redundant returnMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This obviously redundant return has been in the driver from the very first version. Remove it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 Fix concurrent read from /proc/videocodecsMauro Carvalho Chehab
From: Alexey Dobriyan <adobriyan@gmail.com> Observation one: ->write_proc and ->data assignments aren't needed. Removed. Observation two: codecs lists are unprotected. Patch doesn't fix this. Observation three: /proc/videocodecs printout is done to temporary _global_ buffer which is freed in between. Consequently, two users hitting this file can screwup each other. Steps to reproduce: modprobe videocodec while true; do cat /proc/videocodecs &>/dev/null; done & while true; do cat /proc/videocodecs &>/dev/null; done & The fix is switching to seq_files, this removes code, especially some line-length "logic". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-10 bttv: Fix memory leak in radio_releaseMauro Carvalho Chehab
From: Robert Fitzsimons <robfitz@273k.net> Fix the leak of the bttv_fh structure allocated in radio_open which was introduced by commit 5cd3955cb8adfc1edf481e9e1cb2289db50ccacb. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15Sync some small differences from kernel treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-15Backport changeset 5fa1247a2b56f33f88432c24e109deaf91ef8281Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Original patch from Al Viro <viro@ftp.linux.org.uk> Date: Sat Mar 29 03:07:38 2008 +0000 NULL noise: drivers/media kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-12 mt312: add attach-time setting to invert lnb-voltageMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Add a setting to config struct for inversion of lnb-voltage. Needed for support of Avermedia A700 cards. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-12 mt312: Add support for zl10313 demodMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Add zl10313 support to mt312 driver. zl10313 uses 10.111MHz xtal. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-12 mt312: Supports different xtal frequenciesMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Do not hardcode xtal frequency but allow different values for future zl10313 support. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-12 mt312: Fix diseqcMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Correct the frequency of the emitted diseqc signal to 22kHz. Adds sleep(100) to wait for message to be transmitted. For now the only user of mt312 is b2c2-flexcop, and it does overwrite all diseqc related functions with own code. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-12 mt312: Cleanup buffer variables of read/write functionsMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Change type of buffer variables from void* to u8* to save some casts. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13merge from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-04-13Added support for SkyStar2 rev2.7 and ITD1000 DVB-S tunerPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This patches adds support for the SkyStar2 rev2.7 with the PN1010/ITD1000 Frontend. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-04-13Support for DVB-S demod PN1010 (clone of S5H1420) addedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This device is a clone of the PN1010 used by SkyStar2 rev2.7 . This patch adds support for the flexcop-device and makes the driver look a little bit nicer. It needs to be checked whether the driver is still ok for the budget-cards. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-27 04:20:10 +0000