summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2007-10-31Add post process interfacesManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Limit initial RF AGC gainManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Limit bandwidth with a 3dB response fallManu Abraham
In this case, we will be sure that there exists a carrier and the center frequency would be simply f1 - f2. In such a circumstance, the TR loop is simplified to doing a simple check for timing, rather than searching for the same. From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Increment the AGC1 and AGC2 gain respectively, improves sensitivity slightlyManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Bug ID #19: Diseqc works properly at 90MHz only on Cut 1.1 and 2.0Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30BUG! Setting CRL parameter overwrote the CR Algorithm type,Manu Abraham
eventually leading to wrong search algorithm to be employed in the DVB-S carrier loop optimization. Symptom: Once the CR optimization stage is passed either way, in a successful or failed manner, the very next carrier search will fail, due to no Carrier Search Algorithm specified. From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-25Add support for the Satelco Easywatch DVB-S2 PCI cardManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-24Fix: assignment of wrong valuesManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-19Code simplification: Sleep only for the required time interval.Manu Abraham
* Saves 70 mS LOCK time on the STB6100 based * Saves 100 mS LOCK time on the TDA8261 based From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18missing breakManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18Initialize at 90MHz itselfManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18Deviation from the reference, pullup is 12k insteadManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-15Though insignificant, removes an unnecessary read of the LOCK_LOSS register,Manu Abraham
which should have happenend in the DVB-S2 mode only, but reading it as it is for the other delivery systems causes nothing to say but LOCK_LOST, which just causes confusion amongst users. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-15Bug: Fix a typoManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-15We must wait for the PLL to stabilizeManu Abraham
Thanks to Peter for the in depth explanation From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-10return invalid for invalid parametersManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-09Bug: unnecessary large current causes large phasor errorsManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-09DVB_ATTACH for STB0899, STB6100, TDA8261Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-09DVB_ATTACH for STB0899, STB6100, TDA8261Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-06Hmmph, a proper calculation broke the working behaviour.Manu Abraham
Need some thoughts, temporary for now .. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-05Bug: DiSEqC receiver was trying to initialize the transmitterManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-05Initialize DiSEqCManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-05Bug: Set Auxilliary Clock Register correctlyManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-05Fix tuner name and commentManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-05Bug! Timing recovery was calculated for 99MHz not 90 MHzManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-04Bug: Missing reference clock definitionManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-04Bug! inverted logicManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-29Debug: We need to check for tuner LOCK LOSS,Manu Abraham
especially in the case of simple PLL's From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-27Optimizations Reduce capture range from 10MHz to 3MhzManu Abraham
* Reduces szapping time a lot * increased stability at Low Symbol rates * overall increases reliability in tuning From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-26Really silly bug, setting bandwidth into frequencyManu Abraham
probably should stop fiddling with code late nights. :-( Thanks to Marco for pointing it out and fixing it. From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-26Practical tests show that the TT S2 3200 has I/Q inputs inverted, similar to ↵Manu Abraham
the KNC1. Don't have this hardware and cannot verify this for myself, but from the reports this looks to be quite a reasonable and correct hypothesis. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25the KNC1 and clones also don't have the I/Q inputs swappedManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25Fix the CA module not working issueManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25TT S2 3200 shouldn't need Inversion ON and Inversion AUTO at the same timeManu Abraham
This is a racy situation. Inversion is default OFF on the TT S2 3200 hardware, unlike the KNC1 where it is default Inverted From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25Code SimplificationManu Abraham
Use an enumeration for I/Q Swap rather than an int, easier to spot the nasty ones From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25Code SimplificationManu Abraham
The 2 callbacks created nothing more than confusion From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Still messing upManu Abraham
* Cleanup * Use KNC1's default settings to startup with * Add in tuner wrapper calls From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Initial support for the Technotrend TT S2 3200Manu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-24Fix bug obviously, some enhancements as wellManu Abraham
* enable i2c_gate before doing any transaction * read is one single message with 2 words * reduce sleep from 100mS to 20mS From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-23Really silly! Disabled all clocks and expected it to run.Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-23Add initial support forManu Abraham
* KNC1 DVB-S2 Plus * KNC1 DVB-S2 OEM (known as Satelco DVB-S2) From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-22cache last successful stateManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Add TDA8261 to buildManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-22initial go at TDA8261 tunerManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-22Register definition bugsManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-22Offset Freq has been set in regManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-22Use kzalloc instead of kmallocManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-22Reference Clock is in kHzManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02FIX: Write to the correct registerManu Abraham
Thanks to Marko Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02FIX: Add in missing inversion (should be ideally in the config struct)Manu Abraham
Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-26 06:51:26 +0000