| Age | Commit message (Collapse) | Author |
|---|
|
From: Igor M. Liplianin <liplianin@me.by>
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TBS_6920
The card tested by me (Igor).
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
|
|
at ffffffff" boundary="------------060402040603020802080803"
From: Tony Broad <tony@byteworkshop.co.uk>
I'm using a "Hauppauge WinTV-NOVA-T DVB card" of PCI id "13c2:1005" with
kernel 2.6.27.9.
I've recently experienced the following fairly consistent kernel oops on
startup in grundig_29504_401_tuner_set_params from budget.c. As you
might expect, following this failure, the card doesn't work.
I'm not a kernel developer, nevertheless I seem to have managed to track
this down to a non-existent initialisation of
budget->dvb_frontend->tuner_priv.
The attached patch fixes the problem for me (and I've managed to tune
the card successfully as a result), but I don't know of anyone else
using the driver so I can't test it on other people.
Please let me know if this works for you or if I've done something
terribly wrong ;-(
BUG: unable to handle kernel paging request at ffffffff
IP: [<f8981e11>] :budget:grundig_29504_401_tuner_set_params+0x3b/0xf8
*pde = 007e0067 *pte = 00000000
Oops: 0000 [#1] SMP
Modules linked in: bridge stp bnep rfcomm l2cap asb100 hwmon_vid hwmon
fuse ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT
xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter
ip6_tables x_tables ipv6 loop dm_multipath scsi_dh ppdev snd_cmipci
gameport snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
snd_pcm_oss snd_mixer_oss l64781 snd_pcm snd_page_alloc snd_opl3_lib
snd_timer parport_pc snd_hwdep parport btusb snd_mpu401_uart budget
budget_core snd_rawmidi bluetooth saa7146 snd_seq_device ttpci_eeprom
snd soundcore sr_mod i2c_sis96x cdrom dvb_core sis900 i2c_core floppy
pcspkr mii sata_sil sg dm_snapshot dm_zero dm_mirror dm_log dm_mod
pata_sis ata_generic pata_acpi libata sd_mod scsi_mod crc_t10dif ext3
jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 2319, comm: kdvb-fe-0 Not tainted (2.6.27.9-73.fc9.i686 #1)
EIP: 0060:[<f8981e11>] EFLAGS: 00010286 CPU: 0
EIP is at grundig_29504_401_tuner_set_params+0x3b/0xf8 [budget]
EAX: f6417f00 EBX: f6f53808 ECX: 00000000 EDX: ffffffff
ESI: f6f94404 EDI: f6417f00 EBP: f6417f10 ESP: f6417ef0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kdvb-fe-0 (pid: 2319, ti=f6417000 task=f642b2c0 task.ti=f6417000)
Stack: f6e39800 00000000 00000004 f6417f00 c064523c f6f53808 f6f53800 f6f94404
f6417f54 f8b2e45a f6417f24 00000286 f6417f4c f6417f38 00000000 00000286
f6417f3c c064520f f642b2c0 f6417f6c c064456f 00000001 f6f94400 00000001
Call Trace:
[<c064523c>] ? _spin_lock_irqsave+0x29/0x30
[<f8b2e45a>] ? apply_frontend_param+0x27/0x357 [l64781]
[<c064520f>] ? _spin_lock_irq+0x1c/0x20
[<c064456f>] ? __down_common+0x91/0xbf
[<f894f25d>] ? dvb_frontend_swzigzag_autotune+0x17d/0x1a4 [dvb_core]
[<f894f780>] ? dvb_frontend_swzigzag+0x1ac/0x209 [dvb_core]
[<f894fcc8>] ? dvb_frontend_thread+0x2eb/0x3b3 [dvb_core]
[<c043c166>] ? autoremove_wake_function+0x0/0x33
[<f894f9dd>] ? dvb_frontend_thread+0x0/0x3b3 [dvb_core]
[<c043bec3>] ? kthread+0x3b/0x61
[<c043be88>] ? kthread+0x0/0x61
[<c040494b>] ? kernel_thread_helper+0x7/0x10
=======================
Code: ec 14 8b 80 00 02 00 00 8b 93 08 02 00 00 8d 7d e4 8b 40 20 89 45
e0 31 c0 85 d2 f3 ab 8d 45 f0 66 c7 45 e8 04 00 89 45 ec 74 09 <0f> b6
02 66 89 45 e4 eb 06 66 c7 45 e4 61 00 8b 0e be 0a 8b 02
EIP: [<f8981e11>] grundig_29504_401_tuner_set_params+0x3b/0xf8 [budget]
SS:ESP 0068:f6417ef0
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Robert Krakora <rob.krakora@messagenetsystems.com>
Fix for KWorld 330U Board
Many thanks to Devin and Mauro!!!
Priority: normal
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Robert Krakora <rob.krakora@messagenetsystems.com>
Fix for KWorld 330U AC97
Many thanks to Devin and Mauro again!!!
Priority: normal
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Robert Krakora <rob.krakora@messagenetsystems.com>
Clock (XCLK) Cleanup
Priority: normal
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Antoine Jacquet <royale@zerezo.com>
Priority: normal
Tested-by: Hámorszky Balázs <balihb@freepop.hu>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
|
|
From: Devin Heitmueller <dheitmueller@linuxtv.org>
Revert a change made in change 9743 which resulted in a kernel panic in some
cases on shutdown of the audio stream.
First discovered when working on the Pinnacle 880e support, and later
reproduced by a user on the mailing list with the HVR-900 as well.
Priority: high
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
|
|
From: Robert Krakora <rob.krakora@messagenetsystems.com>
em28xx: Fix audio URB transfer buffer memory leak and race
condition/corruption of capture pointer
Leak fix kindly contributed by Pádraig Brady.
Priority: normal
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Add v4l2_i2c_tuner_addrs() to obtain the various I2C tuner addresses.
This will be used in several drivers, so make this a common function
as we do not want to have these I2C addresses all over the place.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Register v4l2_device and switch to v4l2_subdev to access the i2c modules.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mike Isely <isely@pobox.com>
The name of the pvrusb2 module is not likely to ever change, and there
are plenty of other places where the name is directly coded, so there
is little utility in using a macro to infer the module name here. In
addition, using that macro complicates other uses of the driver
involving older kernels where this macro works differently. Yes I
know for many places we don't have to worry about that. But my
alternative is that I have to build special logic in the pvrusb2
standalone driver to special-case what is otherwise costmetic and that
is just plain nuts for something as trivial as this, especially since
this change does not at all have any compile time or run time impact
on the driver. I'm just removing a nicety that didn't have a lot of
value here to begin with.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
It appears that various v4l-dvb drivers are changing to require
explicit initialization before use. This change to the pvrusb2 driver
implements an automatic issuance of VIDIOC_INT_INIT when a module is
bound to the driver, thus conforming to the new behavior.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
With the conversion to v4l2_subdev one bit of code was accidentally dropped:
on receiving the first command the driver has to load the fw. A new init()
command was introduced to do that explicitly for bridge drivers that are
converted to use v4l2_subdev, but old drivers that are not yet converted
no longer worked.
This patch fixes this regression for these old drivers.
Priority: high
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mike Isely <isely@pobox.com>
The VIDIOC_QUERYCTRL command needs to actually do a queryctrl, not a
querymenu. Similarly, the VIDIOC_QUERYMENU command needs to actually
do a querymenu not a queryctrl.
Priority: high
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
Previous v4l-dvb changeset id 4cc8ed11e2e0 changed the pvrusb2-hdw
internal API regarding i2c chip debug register access. However that
change failed to also update the corresponding function comment
describing the API. As driver maintained I never saw a request for an
ack on that change; there probably should have been one especially
since the manner in which this API operates was changed - its
interface is now entangled with a v4l specific struct and I would have
preferred to keep this API clear of moving-target v4l-isms such as
this one if at all possible which is why I had done it the way I did
before. But whatever. This commit at least fixes the comment issue.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
Use the new pvrusb2 internal API to grab the device identifier, rather
than generating it directly. This unifies some code and make possible
use of that identifier in places other than sysfs.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
Implement a new internal function to create a string device
identifier. This ID stays with the specific device, making it useful
to user space to identify specific devices. We use the serial number
if available; otherwise we give up and just spit out a unit/instance ID.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
tag: tip
user: Mauro Carvalho Chehab <mchehab@redhat.com>
date: Wed Jan 14 09:45:53 2009 -0200
files: linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c
description:
USB: change interface to usb_lock_device_for_reset()
backport commit 011b15df465745474e3ec85482633685933ed5a7
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Tue Nov 4 11:29:27 2008 -0500
USB: change interface to usb_lock_device_for_reset()
This patch (as1161) changes the interface to
usb_lock_device_for_reset(). The existing interface is apparently not
very clear, judging from the fact that several of its callers don't
use it correctly. The new interface always returns 0 for success and
it always requires the caller to unlock the device afterward.
The new routine will not return immediately if it is called while the
driver's probe method is running. Instead it will wait until the
probe is over and the device has been unlocked. This shouldn't cause
any problems; I don't know of any cases where drivers call
usb_lock_device_for_reset() during probe.
kernel-sync:
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Nicolas Fournier <nicolasfournier@yahoo.com>
The following patch adds support for a new version of the
Terratec Cinergy DT USB XS Diversity Dual DVB-T TV tuner stick.
The USB ID of the new stick is 0ccd:0081.
The hardware of the stick has changed, when compared to the first version of
this stick, but it still uses quite standard components, so that only minor
changes are needed to the sources.
The patch has been successfully tested with hotplugging the device and then
2 x tzap and 2 x mplayer, to watch two different TV programs simultaneously.
The stick works with both, the old and new firmwares:
- dvb-usb-dib0700-1.10.fw and
- dvb-usb-dib0700-1.20.fw
Priority: normal
Signed-off-by: Nicolas Fournier <nicolasfournier@yahoo.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Some em28xx devices use the PCM IN AC 97 PIN for digital audio. However,
currently, the PCM IN selection is not set by the driver. This patch allows
specifying the PCM IN expected output, via board description table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The saa6752hs module needs this.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: high
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The zoran driver does a module_get/put of THIS_MODULE on device open/close.
This isn't necessary as the kernel does this automatically.
Clean up the failure path of zoran_open() somewhat.
Make the dprintk()s on open/close a higher debug level and make the user
count printed take the current open/close into account.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The driver should only use the kernel mapped io address, zr36057_mem, and
not the PCI bus address, zr36057_adr. Since the latter is only printed out
once, there is no need to save it in the driver data structure.
There was some old code that looked like it was for the Alpha architecture
which would use the PCI bus address. It probably no longer applies to
modern kernels.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Instead of using custom code, just let the device layer look it up for us
from the pci device table. This requires extending the pci device table to
list each known card, plus a catch-all entry for the cards that don't have
sub-system vendor/device data.
Improve some of the info and error messages too.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The driver was keeping a global array with an entry for each zoran device
probed. It was a leftover from when the driver didn't dynamically allocate
the driver data for each device.
There was only one use left, in the video device's ->open() method, looking
up the struct zoran for the opened device from the minor number. This can
be done better with video_get_drvdata().
Since zoran_num is now only used in the pci driver's ->probe() method, it
doesn't need to be an atomic_t and be static. There is a race if multiple
zoran cards could be probed at the same time, but currently the probe
method for a given driver is single threaded.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
When initializing a module parameter that is a per-card array, use
"{ [0 ... (BUZ_MAX-1)] = -1 }" instead of "{ -1, -1, -1, -1 }". This way
all of the entries will be correctly set to -1 if someone changes BUZ_MAX
to a value other than 4.
Adjust some of the parameter help text too.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Commited patch 0a97a636c31e wasn't the latest version of the patch. This
fixes some problems with it and should be folded into it.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Nam Phạm Thành <phamthanhnam.ptn@gmail.com>
This patch adds support for Philips webcam snapshot button as an
event input device, for consistency with other webcam drivers.
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Andy Walls <awalls@radix.net>
On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote:
> With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel
> [ 14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded
> [ 14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared
> [ 14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
> [ 14.555374] cx88[0]/2: cx2388x based DVB/ATSC card
> [ 14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000
> [ 14.555560] IP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4
> [ 14.555652] *pde = 00000000
> [ 14.555735] Oops: 0002 [#1] SMP
> [ 14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys
> [ 14.557013]
> [ 14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1)
> [ 14.557013] EIP: 0060:[<c02e6bff>] EFLAGS: 00010246 CPU: 1
> [ 14.557013] EIP is at __mutex_lock_common+0x3c/0xe4
> [ 14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000
> [ 14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88
> [ 14.557013] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> [ 14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000)
> [ 14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110
> [ 14.557013] de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8
> [ 14.557013] e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000
> [ 14.557013] Call Trace:
> [ 14.557013] [<c02e6d38>] ? __mutex_lock_slowpath+0x17/0x1a
> [ 14.557013] [<c02e6b88>] ? mutex_lock+0x12/0x14
> [ 14.557013] [<c02e6b88>] ? mutex_lock+0x12/0x14
> [ 14.557013] [<e1ac7115>] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb]
> [ 14.557013] [<e1aeca62>] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb]
> [ 14.557013] [<e09ee41e>] ? cx8802_register_driver+0xbd/0x1ac [cx8802]
> [ 14.557013] [<e09ee467>] ? cx8802_register_driver+0x106/0x1ac [cx8802]
> [ 14.557013] [<e1aee37f>] ? dvb_init+0x22/0x27 [cx88_dvb]
> [ 14.557013] [<c0101132>] ? _stext+0x42/0x11a
> [ 14.557013] [<e1aee35d>] ? dvb_init+0x0/0x27 [cx88_dvb]
> [ 14.557013] [<c013d2ca>] ? __blocking_notifier_call_chain+0xe/0x51
> [ 14.557013] [<c014970b>] ? sys_init_module+0x8c/0x17d
> [ 14.557013] [<c0103b42>] ? syscall_call+0x7/0xb
> [ 14.557013] [<c013007b>] ? round_jiffies_relative+0x14/0x16
> [ 14.557013] =======================
> [ 14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0
> [ 14.557013] EIP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88
> [ 14.565211] ---[ end trace 94d8b014e067ac7b ]---
This patch provides a proper locking for frontends allocation
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Jean Delvare <khali@linux-fr.org>
CC: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
This is a really old and crufty driver that wasn't using the long
established pci driver framework.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch adds the capability of selecting between 4 different inputs
on vivi driver. Input 0 is the normal color bar, while inputs 1-3 are
modified color bars.
This allows testing input selection on userspace applications and
serves as an implementation model for other drivers.
The current approach allows a maximum of 10 different inputs, since the
input name generator assumes that we need just one digit to present the
input. It shouldn't be hard to modify it to present a bigger name of
inputs, but, in fact, it doesn't make much sense of doing it for this
test driver.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Andy Walls <awalls@radix.net>
When enabling a shared IRQ line, then saa7134_irq handler could be invoked
before the driver had completely set up internal structures, due to a shared
interrupt line firing. Clear the saa7134 interrupt status reg, before
requesting the irq line, so that stale IRQ status isn't processed before the
internal structures are set up.
Marcin Slusarz recently brought this Oops to the attention of the v4l-dvb
lists and provided an initial analysis by investigating reports found here:
http://kerneloops.org/guilty.php?guilty=mute_input_7133&version=2.6.27-release&start=1802240&end=1835007&class=oops
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Priority: normal
Signed-off-by: Andy Walls <awalls@radix.net>
|
|
From: Martin Dauskardt <martin.dauskardt@gmx.de>
Register 0x2d has to be set differently in the saa7129 compared to the
saa7127. This was not done correctly, so S-Video was broken in certain
circumstances.
This fixes a regression introduced in 2.6.28.
Priority: high
Signed-off-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
