summaryrefslogtreecommitdiff
path: root/linux/drivers/media
AgeCommit message (Collapse)Author
2008-12-01dib0700: Stop repeating after user stops pushing buttonPatrick Boettcher
From: Devin Heitmueller <devin.heitmueller@gmail.com> A user noticed that there would continue to be 4-6 keypresses even after the user stopped holding down the button. This was because we were not reading the bulk pipe faster than the firmware was injecting information, which would result in a backlog. Make the query interval faster, and increase the number of cycles before we start repeating to compensate. Thanks to Knud Poulsen <knud.poulsen@nokia.com> for pointing this out. Priority: high Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-01Correct the name of the Pascal Stangs libraryErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-30cx18: cx18_writel_expect() should not declare success on a PCI read errorAndy Walls
From: Andy Walls <awalls@radix.net> cx18: cx18_writel_expect() should not declare success on a PCI read error. This removes the potential for cx18_write*_expect() calls to not accomplish a PCI write successfully as expected. The CX18-AV core uses the *expect() calls often and this may be the source of intermittent audio problems and standands switching problems. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-29ivtv/ivtvfb: convert to v4l2_device/v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-29wm8775: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-29wm8739: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-29vp27smpx: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-29upd64083: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-29upd64031a: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-29em28xx: improve board description messagesMauro Carvalho Chehab
Print manufacturer/product info from USB device and also card entry. From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-28gspca: Align the 640x480 and 320x240 init of tas5130 in zc3xx.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-28gspca: Do the webcam microphone work when present.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> This patch adds the set/get/enum audio controls. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-27em28xx: improve probe messagesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Prints usb speed used by em28xx interface. While there, fixes USB ID's endiannes. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27Use read/modify/write when toggling vflip on the po1030Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27The po1030 never sends long i2c messages, no need to test for that in the ↵Erik Andrén
init phase From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the s5k83a specific read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Convert the s5k83a sensor to use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the s5k4aa implementation of the read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Convert the s5k4aa sensor to use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the mt9m111 implementation of the read_sensor function.Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Convert the mt9m111 to use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the po1030 read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Let the po1030 use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the ov9650 implementation of the read sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Let the ov9650 use the common read sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Toggle read sensor sequence depending on type of sensor. Check that no more ↵Erik Andrén
than max width of a sensor is read
2008-11-27em28xx: move tuner gpio's to the cards structMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27em28xx: Add support for suspend the device when not usedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Several chips may be turned off when the device is not used, like audio, video and dvb demods. This patch adds a gpio callback at the core structs to allow turning off such devices. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27em28xx: fix gpio settingsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> A previous changeset moved gpio from em28xx struct into em28xx_board. However, the driver were not updated to properly honor those gpio's. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27em28xx: fix tuner absent entriesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Before this patch, several devices without tuner were kept the value 0 for tuner_type. However, this means TUNER_TEMIC_PAL. Replace those entries for the proper TUNER_ABSENT value. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27em28xx: replace magic numbers for mux aliasesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of using magic vmux/amux, let's use an alias where possible. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27em28xx: move gpio lines into board table descriptionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of a large, ugly switch specifying the gpio tables for each device, let's move it into the boards struct. This also helps to see what boards have already the gpio's for DVB. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27Backed out changeset 394ff1552cd4Erik Andrén
2008-11-26gspca: Add sensor mi0360 in vc032x.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-26Add flush control to each sensorErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26Add initial read sensor implementationErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26merge: v4l-dvbJean-Francois Moine
2008-11-26gspca: Change the colors and add the red and blue controls in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> The colors control (saturation) acted as color balance. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-26Remove all sensor specific write functions.Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26Convert all sensors to use the unified write sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26First step into unifying the read and write sensor functionsErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-25cx18: Change work_queue teardown to work for kernels earlier than 2.6.22Andy Walls
From: Andy Walls <awalls@radix.net> For kernels earlier than 2.6.22, we can't cancel work, so we have to flush the work queue to completion before destroying it. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-25cx18: Change to per CX23418 device work queues for deferrable work handlingAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Change to per CX23418 device work queues for deferrable work handling. Needed to support 2.6.22 and earlier kernels that can't selectively cancel work orders. Also will provide slightly better performance on SMP systems. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-25uvcvideo: Prevent compat.h from being included in userspace code.Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> When used in userspace code, the uvcvideo.h header shouldn't pull compat.h. Make sure this won't happen by moving the #include to a __KERNEL__ protected section. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2008-12-14merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-12cx18: Enable raw VBI captureAndy Walls
From: Andy Walls <awalls@radix.net> A combined authorship patch from Hans Verkuil and Andy Walls. Raw VBI can now be captured but requires a video capture to be in progress as well. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-12cx18: Port fix for raw/sliced VBI mixup from ivtv and cx25840Andy Walls
From: Andy Walls <awalls@radix.net> This is a port of the fixes Hans Verkuil made for ivtv/cx25840: The service_set field was used to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead the driver should check on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated the cx18 driver accordingly, including an additional check in cx18_start_v4l2_encode_stream() that didn't exist in ivtv. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-12cx18: Avoid making firmware API calls with the queue lock heldAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Avoid making firmware API calls with the queue lock held. The source of MPEG strem corruption when not holding the queue lock was found to be that the MPEG buffer could be retrieved by the user app before it was sync'ed for the host cpu. Incoming buffers are now sync'ed before being put on q_full and releasing the queue lock. We can thus avoid the sometimes lengthy call to the firmware for CPU_DE_SET_MDL while holding the queue lock, so we can get better performance. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-08cx18: Increment version number due to siginificant buffering changesAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Increment version number due to siginificant buffering changes. Now version 1.0.4 Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-07cx18: Add module parameters for finer control over buffer allocationsAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Add module parameters for finer control over buffer allocations. User now has the option of setting smaller buffers to get lower latency transfers from the encoder. User can also now set the number of buffers used for a stream explicitly. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-04 19:04:33 +0000