summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2009-03-28omap24xxcam: Remove buffer type check from vidioc_s/g_parmTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l2-ioctl core now only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used in vidioc_(g|s)_parm. This driver only defines ->vidioc_try_fmt_vid_cap() so only VIDEO_CAPTURE buffers are allowed to be used with vidioc_s_parm() and vidioc_g_parm(). Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> CC: Sakari Ailus <sakari.ailus@nokia.com>
2009-03-28gspca: Stop setting buffer type, and avoid memset in querycapTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l2-ioctl core checks the buffer type now by only allowing buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined. This driver only defines ->vidioc_try_fmt_vid_cap() so only VIDEO_CAPTURE buffers are allowed to be used with vidioc_g_parm. Also, ->vidioc_enum_fmt_vid_cap() is only called for VIDEO_CAPTURE buffers. There is no need to set the buffer type since it must already be the correct value. The struct which ->vidioc_querycap() is supposed to fill in is already zeroed so it's not necessary to call memset on it. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> CC: Jean-Francois Moine <moinejf@free.fr>
2009-03-28bttv: Remove buffer type check from vidioc_g_parmTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs(), vidioc_reqbufs() and now vidioc_(s|g)_parm. The driver was only allowing VIDEO_CAPTURE buffers for g_parm, but since the driver defines ->vidioc_try_fmt_vid_overlay() and ->vidioc_try_fmt_vbi_cap() it will now allow VIDEO_OVERLAY and VBI_CAPTURE buffers as well. This should be fine as the driver only fills in the frame rate field, which is just as valid for video overlay and vbi capture as it is for video capture. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-03-28saa7146: Remove buffer type check from vidioc_g_parmTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l2-ioctl core now only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(g|s)_parm. The driver was only allowing VIDEO_CAPTURE buffers for g_parm, but since the driver defines ->vidioc_try_fmt_vid_overlay() it will now allow VIDEO_OVERLAY buffers as well. This should be fine as the fields the driver fills in, readbuffers and frame rate, aren't wrong for VIDEO_OVERLAY buffers. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-03-28v4l2-ioctl: Check format for S_PARM and G_PARMTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Return EINVAL if VIDIOC_S/G_PARM is called for a buffer type that the driver doesn't define a ->vidioc_try_fmt_XXX() method for. Several other ioctls, like QUERYBUF, QBUF, and DQBUF, etc. do this too. It saves each driver from having to check if the buffer type is one that it supports. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-03-28cx231xx: Fix Kconfig help itemsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26Remove debug output from stb6100_cfg.hMauro Carvalho Chehab
From: Artem Makhutov <artem@makhutov.org> This patch removes the debug output from stb6100_cfg.h as it is flooding the syslog with tuning data during normal operation. Signed-off-by: Artem Makhutov <artem@makhutov.org> Acked-by: Manu Abraham <abraham.manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-28hdpvr: empty internal device buffer after stopping streamingJanne Grunau
From: Janne Grunau <j@jannau.net> Makes the next capturing starting faster and more reliable. Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-28hdpvr: convert printing macros to v4l2_* with struct v4l2_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> it gives us a nice and unique prefix per device Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-28hdpvr: add struct v4l2_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26[PATCH] pluto2: silence spew of card hung up messagesMauro Carvalho Chehab
From: Alan Cox <alan@lxorguk.ukuu.org.uk> If the card is ejected on some systems you get a spew of messages as other shared IRQ devices interrupt between the card eject and the card IRQ disable. We don't need to spew them all out Closes #7472 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26[PATCH] cx88: Missing failure checksMauro Carvalho Chehab
From: Alan Cox <alan@lxorguk.ukuu.org.uk> The ioremap one was reported in October 2007 (Bug 9146), the kmalloc one was blindingly obvious while looking at the ioremap one The bug suggests some other configuration for lots of I/O memory (32MB per device is ioremapped) but I'll leave that to the real maintainers Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26allow v4l2 drivers to provide a get_unmapped_area handlerMauro Carvalho Chehab
From: Daniel Glöckner <dg@emlix.com> Shared memory mappings on nommu machines require a get_unmapped_area file operation that suggests an address for the mapping. This patch adds a way for v4l2 drivers to provide this callback. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27siano: add high level SDIO interface driver for SMS based cardsMauro Carvalho Chehab
From: Uri Shkolnik <uris@siano-ms.com> This patch provides SDIO interface driver for SMS (Siano Mobile Silicon) based devices. The patch includes SMS high level SDIO driver and requires patching the kernel SDIO stack, those stack patches had been provided previously. I would like to thank Pierre Ossman, MMC maintainer, who wrote this driver. Priority: low Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27Fix printk format warning:Mauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25tda827x: fix locking issues with DVB-CMauro Carvalho Chehab
From: klaas de waal <klaas.de.waal@gmail.com> Separate tuning table for DVB-C solves tuning problem at 388MHz TechnoTrend C-1501 DVB-C card does not lock on 388MHz. I assume that existing frequency table is valid for DVB-T. This is suggested by the name of the table: tda827xa_dvbt. Added a table for DVB-C with the name tda827xa_dvbc. Added runtime selection of the DVB-C table when the tuner is type FE_QAM. This should leave the behaviour of this driver with with DVB_T tuners unchanged. This modification is in file tda827x.c The tda827x.c gives the following warning message when debug=1: tda827x: tda827x_config not defined, cannot set LNA gain! Solved this by adding a tda827x_config struct in budget-ci.c. Priority: normal Signed-off-by: Klaas de Waal <klaas.de.waal@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-24changed ioctls to unlockedMauro Carvalho Chehab
From: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27hdpvr: locking fixesJanne Grunau
From: Janne Grunau <j@jannau.net> unlock io_mutex in hdpvr_stop_streaming hdpvr_disconnect to allow the streaming worker to stop before we flush the workqueue. do not return to user space with mutex held in vidioc_encoder_cmd with an unknown encoder command. Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26hdpvr: return immediately from hdpvr_poll if data is availableJanne Grunau
From: Janne Grunau <j@jannau.net> simplifies check for available data with hdpvr_get_next_buffer Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26hdpvr: set usb interface dev as parent in struct video_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-27hdpvr: use debugging macro for buffer statusJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26ce6230: avoid using unitialized varMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/dvb/dvb-usb/ce6230.c: In function ‘ce6230_i2c_xfer’: drivers/media/dvb/dvb-usb/ce6230.c:107: warning: ‘ret’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26avoid warnings for request_ihex_firmware on dabusb and vicamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/video/usbvideo/vicam.c: In function ‘vicam_open’: drivers/media/video/usbvideo/vicam.c:194: warning: ‘fw’ may be used uninitialized in this function drivers/media/video/dabusb.c: In function ‘dabusb_probe’: drivers/media/video/dabusb.c:337: warning: ‘fw’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26pvrusb2: add a missing source at MakefileMauro Carvalho Chehab
From: Kyle McMartin <kyle@redhat.com> As pointed by Steve Dickson, pvrusb2 Makefile was not compiling pvrusb2-cx53l32a driver. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26gspca - zc3xx: The webcam DLink DSB - C320 has the sensor pas106.Jean-Francois Moine
From: Douglas Schilling Landgraf <dougsland@redhat.com> Reported-by: Bruna Griebeler <bruna@griebeler.com> Priority: normal Tested-by: Bruna Griebeler <bruna@griebeler.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sonixj: Prefer sonixj instead of sn9c102 for 0471:0327.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> Prefer the gspca sonixj driver for the Philips SPC600NC webcam instead of the sn9c102 driver. As we've got userreports that it works with the gspca driver, whereas it fails with the sn9c102 driver, see: https://bugzilla.redhat.com/show_bug.cgi?id=477111 Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - finepix: Use a workqueue for streaming.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Tested-by: Frank Zago <frank@zago.net> Acked-by: Frank Zago <frank@zago.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sq905: Optimize the resolution setting.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sq905: Update the frame pointer after adding the last packet.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25merge: http://linuxtv.org/hg/~anttip/ce6230/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25hg merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25Add driver for Intel CE6230 DVB-T USB2.0Antti Palosaari
From: Antti Palosaari <crope@iki.fi> Add driver for Intel CE6230 DVB-T USB 2.0 COFDM demodulator Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-03-25zl10353: add support for Intel CE6230 and Intel CE6231Antti Palosaari
From: Antti Palosaari <crope@iki.fi> Add chip IDs and configuration registers needed for Intel CE6230 and Intel CE6231. Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-03-25gspca - sq905c: New subdriver.Jean-Francois Moine
From: Theodore Kilgore <kilgota@auburn.edu> The code in the new sq905c.c is based upon the structure of the code in gspca/sq905.c, and upon the code in libgphoto2/camlibs/digigr8, which supports the same set of cameras in stillcam mode. I am a co-author of gspca/sq905.c and I am the sole author of libgphoto2/camlibs/digigr8, which is licensed under the LGPL. I hereby give myself permission to use my own code from libgphoto2 in gspca/sq905c.c. Priority: normal Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25gspca - vc032x: Use YVYU format for sensor mi1320_soc.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25gspca - vc032x: Simplify the i2c write function.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-24pvrusb2: Use v4l2_device_disconnect()Mike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-24merge: v4l-dvbJean-Francois Moine
2009-03-23mxl5005s: Switch in mxl5005s_set_params should operate on correct valuesAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-03-23merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23hdpvr: Fix build with Config_I2C not setJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-23ov7670: add missing delay.h include.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-23gspca - vc032x: New sensor mi1320_soc and webcam 15b8:6001 added.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-23merge: v4l-dvbJean-Francois Moine
2009-03-22au0828: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22em28xx: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 23:00:38 +0000