summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2009-03-13cx25840: cx23885 detection was brokenHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An earlier commit accidentally broke the detection of the cx25837 part of the cx23885. Reinstated the commented out code. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-13v4l2-dev: use parent field if the v4l2_device has no parent set.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Normally the parent device of v4l2_device is used as the video device node's parent. But if it was not set, then use the parent field in the video_device struct. This is needed in the cx88 driver, which has one core v4l2_device but creates multiple pci devices (one each for raw and mpeg video). So you cannot associate the core v4l2_device with a particular PCI device, but you can do that for each video_device. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-13cx23885: fix crash on non-netup cardsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the existing boards. Interrupts for the netup part were enabled and handled without testing whether the current board actually had a netup -> instant and fatal crash. I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-13mr97310a: don't discard frame headers on stream outputMauro Carvalho Chehab
From: Theodore Kilgore <kilgota@auburn.edu> Fix a bug where all frame headers were being discarded, instead of being part of the stream output, on MR97310A cameras. The frame headers contain information which may be useful in processing the video output and therefore should be kept and not discarded. A corresponding patch to the decompression algorithm in libv4lconvert/mr97310a.c corrects the change in frame offset. Priority: high Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13mt9t031 bugfixGuennadi Liakhovetski
From: Philippe Rétornaz <philippe.retornaz@epfl.ch> - The video device is not allocated when mt9t031_init() is called, don't use it in debug printk. - The clock polarity is inverted in mt9t031_set_bus_param(), use the correct one. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9t031.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-)
2009-03-13cx23885: convert to v4l2_device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-13mt9v022: allow setting of bus width from board codeGuennadi Liakhovetski
From: Sascha Hauer <s.hauer@pengutronix.de> This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 7 -- drivers/media/video/mt9v022.c | 141 ++++++++++++----------------------------- 2 files changed, 42 insertions(+), 106 deletions(-)
2009-03-13mt9m001: allow setting of bus width from board codeGuennadi Liakhovetski
From: Sascha Hauer <s.hauer@pengutronix.de> This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 7 -- drivers/media/video/mt9m001.c | 143 +++++++++++----------------------------- 2 files changed, 40 insertions(+), 110 deletions(-)
2009-03-13video: use videobuf_waiton() in sh_mobile_ceu free_buffer()Guennadi Liakhovetski
From: Magnus Damm <damm@igel.co.jp> Make sure videobuf_waiton() is used before freeing a buffer. Without this fix we may return the buffer to the allocator before the bus mastering operation is finished. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/sh_mobile_ceu_camera.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
2009-03-13ov772x: use soft sleep mode in stop_captureGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov772x.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
2009-03-13soc-camera: configure drivers with a default format at probe timeGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Currently soc-camera doesn't set up any image format without an explicit S_FMT. According to the API this should be supported, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch moves negotiating of available host-camera format translations to probe() time, and restores the state from the last close() on the next open(). This is needed for some drivers, which power down or reset hardware after the last user closes the interface. This patch also has a nice side-effect of avoiding multiple allocation anf freeing of format translation tables. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 39 ++++++++++++++++++++++--------------- include/media/soc_camera.h | 1 + 2 files changed, 24 insertions(+), 16 deletions(-)
2009-03-13sh-mobile-ceu-camera: set field to the value, configured at open()Guennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> For the case, that we have to capture with a default format, i.e., when the user doesn't call S_FMT, we have to use the field value according to the default, configured at open() time. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/sh_mobile_ceu_camera.c | 17 +++++++++-------- 1 files changed, 9 insertions(+), 8 deletions(-)
2009-03-13soc-camera: configure drivers with a default format on openGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Currently soc-camera doesn't set up any image format without an explicit S_FMT. It seems this should be supported, since, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch configures a default image format on open(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 100 ++++++++++++++++++++++++++------------ 1 files changed, 68 insertions(+), 32 deletions(-)
2009-03-13soc-camera: separate S_FMT and S_CROP operationsGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> As host and camera drivers become more complex, differences between S_FMT and S_CROP functionality grow, this patch separates them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m001.c | 19 +++- drivers/media/video/mt9m111.c | 56 +++++++--- drivers/media/video/mt9t031.c | 84 ++++++++++------ drivers/media/video/mt9v022.c | 62 +++++++---- drivers/media/video/mx3_camera.c | 157 +++++++++++++++++----------- drivers/media/video/ov772x.c | 31 +++++- drivers/media/video/pxa_camera.c | 67 +++++++++--- drivers/media/video/sh_mobile_ceu_camera.c | 17 ++- drivers/media/video/soc_camera.c | 20 ++-- drivers/media/video/soc_camera_platform.c | 9 ++- drivers/media/video/tw9910.c | 45 +++++--- include/media/soc_camera.h | 6 +- 12 files changed, 381 insertions(+), 192 deletions(-)
2009-03-12merge: http://linuxtv.org/hg/~mkrufky/lgdt3305Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13Add support for ProVideo PV-183 to bttvMauro Carvalho Chehab
From: Alan McIvor <alan.mcivor@reveal.co.nz> Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Priority: normal Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-20merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-cafeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19dvb_dummy_fe: Fix compilation breakageMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> As reported by Randy Dunlap <randy.dunlap@oracle.com>: ERROR: "dvb_dummy_fe_ofdm_attach" [drivers/media/video/cx231xx/cx231xx-dvb.ko] undefined! This happens since cx231xx DVB part still misses the frontend modules. So, the dummy frontend were used for development. The proper fix is to implement the DVB modules there, as they will be required. While this won't happen, lets allow the compilation with or without the dummy FE testing module. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19au8522/au0828: Fix Kconfig dependenciesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> au8522 is now dependent of V4L2, as reported by Randy Dunlap <randy.dunlap@oracle.com>: au8522_decoder.c:(.text+0x199898): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x1998b3): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x199944): undefined reference to `v4l2_device_unregister_subdev' au8522_decoder.c:(.text+0x19997c): undefined reference to `v4l2_chip_ident_i2c_client' au8522_decoder.c:(.text+0x199f1e): undefined reference to `v4l2_i2c_subdev_init' Priority: normal CC: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19au0828: Fix compilation when VIDEO_ADV_DEBUG = nMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> As reported by Kyle McMartin and Randy Dunlap: drivers/media/video/au0828/au0828-video.c:1438: error: 'const struct v4l2_subdev_core_ops' has no member named 'g_register' drivers/media/video/au0828/au0828-video.c:1453: error: 'const struct v4l2_subdev_core_ops' has no member named 's_register' This patch properly implements those two API ioctls only when debug is enabled. Priority: normal CC: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-18cafe_ccic: stick in a comment with a request for test resultsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to lack of hardware this conversion to v4l2_device/v4l2_subdev is untested. If all goes well I should be able to test it in about a month, but just in case I can't manage that it should be made clear in the code that this isn't tested. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-18cafe_ccic: replace debugfs with g/s_register ioctls.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Using VIDIOC_DBG_S/G_REGISTER is the standard way of reading/writing register for advanced debugging under v4l2. In addition, using this means that the cafe_ccic driver doesn't need to have knowledge about the used sensor: the debug ioctl can be passed on to the sensor if it isn't for the host. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18ov7670: add support to get/set registersHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18ov7670: cleanup and remove legacy code.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> v4l2-i2c-drv-legacy.h and ov7670_command are no longer needed after the cafe driver is converted to use v4l2_subdev. Rather than using a large ov7670_control array, just call the handlers via a simple switch and use v4l2_ctrl_query_fill() to handle queryctrl. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18cafe_ccic: use v4l2_subdev to talk to the ov7670 sensor.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18cafe_ccic: convert to v4l2_device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Convert this driver to v4l2_device and removed the unnecessary cafe_dev_list. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18ov7670: convert to v4l2_subdevHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-12v4l2-common: add missing i2c_unregister_device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> If the i2c sub-device cannot be found, then we must unregister the i2c_client. Otherwise this will prevent a possible probe for a different device on that same address. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-12cx231xx: fix compile warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-12merge: http://jusst.de/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-12lgdt3305: avoid OOPS in error path of lgdt3305_attachMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Setting state->frontend.demodulator_priv to NULL in the event of a kzalloc error will result in an OOPS. Just remove that line. Thanks to Matthias Schwarzott for pointing this out. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Matthias Schwarzott <zzam@gentoo.org>
2009-03-27Fix printk format warning:Mauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25tda827x: fix locking issues with DVB-CMauro Carvalho Chehab
From: klaas de waal <klaas.de.waal@gmail.com> Separate tuning table for DVB-C solves tuning problem at 388MHz TechnoTrend C-1501 DVB-C card does not lock on 388MHz. I assume that existing frequency table is valid for DVB-T. This is suggested by the name of the table: tda827xa_dvbt. Added a table for DVB-C with the name tda827xa_dvbc. Added runtime selection of the DVB-C table when the tuner is type FE_QAM. This should leave the behaviour of this driver with with DVB_T tuners unchanged. This modification is in file tda827x.c The tda827x.c gives the following warning message when debug=1: tda827x: tda827x_config not defined, cannot set LNA gain! Solved this by adding a tda827x_config struct in budget-ci.c. Priority: normal Signed-off-by: Klaas de Waal <klaas.de.waal@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-24changed ioctls to unlockedMauro Carvalho Chehab
From: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27hdpvr: locking fixesJanne Grunau
From: Janne Grunau <j@jannau.net> unlock io_mutex in hdpvr_stop_streaming hdpvr_disconnect to allow the streaming worker to stop before we flush the workqueue. do not return to user space with mutex held in vidioc_encoder_cmd with an unknown encoder command. Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26hdpvr: return immediately from hdpvr_poll if data is availableJanne Grunau
From: Janne Grunau <j@jannau.net> simplifies check for available data with hdpvr_get_next_buffer Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26hdpvr: set usb interface dev as parent in struct video_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-27hdpvr: use debugging macro for buffer statusJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26ce6230: avoid using unitialized varMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/dvb/dvb-usb/ce6230.c: In function ‘ce6230_i2c_xfer’: drivers/media/dvb/dvb-usb/ce6230.c:107: warning: ‘ret’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26avoid warnings for request_ihex_firmware on dabusb and vicamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/video/usbvideo/vicam.c: In function ‘vicam_open’: drivers/media/video/usbvideo/vicam.c:194: warning: ‘fw’ may be used uninitialized in this function drivers/media/video/dabusb.c: In function ‘dabusb_probe’: drivers/media/video/dabusb.c:337: warning: ‘fw’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26pvrusb2: add a missing source at MakefileMauro Carvalho Chehab
From: Kyle McMartin <kyle@redhat.com> As pointed by Steve Dickson, pvrusb2 Makefile was not compiling pvrusb2-cx53l32a driver. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26gspca - zc3xx: The webcam DLink DSB - C320 has the sensor pas106.Jean-Francois Moine
From: Douglas Schilling Landgraf <dougsland@redhat.com> Reported-by: Bruna Griebeler <bruna@griebeler.com> Priority: normal Tested-by: Bruna Griebeler <bruna@griebeler.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sonixj: Prefer sonixj instead of sn9c102 for 0471:0327.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> Prefer the gspca sonixj driver for the Philips SPC600NC webcam instead of the sn9c102 driver. As we've got userreports that it works with the gspca driver, whereas it fails with the sn9c102 driver, see: https://bugzilla.redhat.com/show_bug.cgi?id=477111 Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - finepix: Use a workqueue for streaming.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Tested-by: Frank Zago <frank@zago.net> Acked-by: Frank Zago <frank@zago.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sq905: Optimize the resolution setting.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sq905: Update the frame pointer after adding the last packet.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25merge: http://linuxtv.org/hg/~anttip/ce6230/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25hg merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 17:16:21 +0000