| Age | Commit message (Collapse) | Author |
|---|
|
From: Erik Andrén <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
|
|
From: Erik Andrén <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Leandro Costantino <lcostantino@gmail.com>
Priority: normal
Signed-off-by: Leandro Costantino <lcostantino@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
|
|
|
|
From: Erik Andren <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Erik Andren <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Erik Andren <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Erik Andren <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Erik Andren <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
|
|
From: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
From: Erik Andrén <erik.andren@gmail.com>
Priority: normal
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
|
|
From: Erik Andrén <erik.andren@gmail.com>
The gspca conversion deprecated a number of defines. Remove them.
Priority: normal
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
|
|
From: David Ellingsworth <david@identd.dyndns.org>
This patch prevents stk-webcam from updating usb device information
once the camera has been removed. This prevents a crash that would
otherwise occur if the camera is disconnected while it is still in
use.
Signed-off-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: David Ellingsworth <david@identd.dyndns.org>
This patch:
1) removes the unnecessary kref.h include file
2) removes unnecessary pointer validation from read and poll routines.
(Neither poll nor read may be called unless a call to open succeeds. A
successful call to open will always set the file private_data pointer.
Verifying that it is not null is therefore unnecessary. The associated
release and mmap calls currently ignore this check.)
3) adds a space to syslog output.
4) removes an unused function prototype.
Signed-off-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Erik Andrén <erik.andren@gmail.com>
A typo was introduced during the gspca conversion, crippling the ability to control the gain on the mt9m111 sensor.
Priority: normal
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
|
|
From: Erik Andrén <erik.andren@gmail.com>
Properly iterate the allocated when freeing the urbs, this fixes a memory leak
Priority: normal
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx23885 frontend allocation code needs to exist in the higher function,
and it also needs to ensure videobug is also correctly initialised
on a per frontend basis. This code uses the previous num_frontends
patch to safely init each future MFE frontend on a single tsport as
as safely as possible - given that we don't have any of those boards.
Again, better to add all of this safety code now, while the MFE patch
set is fresh in everyone mind, than to try and add it 12-24 months from
now, when the subject is cold.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
This allows some cardcoded functions to be more flexible, and paves
the way for any future cards that may have MFE support. Better to add it
now when the MFE patches is fresh in peoples mind, rather than 12 months
from now when new cards appear.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
Bug: the tree generated an oops when the cx23885 was laoded. This avoids
the oops by ensuring the mutex is correctly initialised before it's used.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Darron Broad <darron@kewl.org>
This add initial configuration for radio support on the
hvr-3000/4000. FM radio doesn't work as yet without
further patches (to come), but this prepares for
that.
Experimental radio support shows that it works
when combined with additional audio routing
work for cards with an FMD1216ME analogue
frontend, but not the MEX variant (more later).
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Darron Broad <darron@kewl.org>
This adds audio routing on the hvr-3000/4000
This is a preliminary patch for later routing
requirements.
This adds line-in support on the 2 cards mentioned.
It is also apparent that there is an initial open
fault for line-in when opening composite/s-video.
This will be fixed later.
It was also noticed that the bit-field for audio
routing which was 2 bits needs an increase as
the WM8775 for example, allows a value 4 bits
wide for it's audio mux.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Darron Broad <darron@kewl.org>
This add frontend R/W mutual exclusion.
Prior to this point in time it was possible to open both
frontends simultaneously which an MFE card cannot support.
In order to stop this, a delayed open is performed which
has the following function:
Return EBUSY after a configurable amount of time
if a frontend is unavailable due to the other being
in use.
Only allow opening of a frontend if the kernel thread
of the other has stopped.
This solution was chosen to allow switching between
frontends to work as seamlessly as possible. When both
frontends are actually opened simultaneously then one
will only open, but if quick switching is performed
between one of many then the new open will succeed in
a clean fashion rather than interrupting a kernel
thread.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Darron Broad <darron@kewl.org>
The cx22702 is now always reset on module load. Prior to
this the cx22702 was not found on i2c scan without a
full reset.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Darron Broad <darron@kewl.org>
This adds a configurable (one per card) gate control option
for multi-frontend. Prior to this point gate control was
assumed to be on the primary frontend, this is a fault
when the gate to the analogue section is on the secondary
which is the default for both the HVR-3000 and HVR-4000
in MFE.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Darron Broad <darron@kewl.org>
When using MFE on a setup with both and HVR-3000 and ASUS P7131
card it was noticed that frontend allocation for saa7134
adapters was missing. This patch adds that allocation for
both saa7134 and cx23885 adapters.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Darron Broad <darron@kewl.org>
A number of reference to videobuf_dvb_get_frontend used an invalid
index. This has been fixed.
The section for the HVR3000 in advise_acquire was redundant as
the same logic is used on the HVR4000. This has been removed
and both cards now use the same function.
A number of small errors and whitespace errors are also fixed.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
A detailed description from the original patches 2 years ago:
"The WinTV-HVR3000 has a single transport bus which is shared between
a DVB-T and DVB-S modulator. These patches build on the bus acquisition
cx88 work from a few weeks ago to add support for this.
So to applications the HVR3000 looks like this:
/dev/dvb/adapter0/fe0 (cx24123 DVB-S demod)
/dev/dvb/adapter0/fe1 (cx22702 DVB-T demod)
Additional boards continue as before, eg:
/dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod)
The basic change is removing the single instance of the videobuf_dvb in
cx8802_dev and saa7134_dev(?) and replacing it with a list and some
supporting functions.
*NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so
two or three current cx88 patches appear to be reversed by this tree,
this will be cleaned up in the near future. The patches missing change
the mutex handing to core->lock, fix an enumeration problem."
It should be recognised that a number of people have been maintaining
this patchset. Significant levels of Kudos to everyone one involved,
including but not limited to:
Darron Broad
Fabio M. Di Nitto
Carlo Scarfoglio
Hans Werner
Without the work of these people, and countless others, my two year old
patches would of died on the Mercurial linuxtv.org vine a long time
ago.
TODO: Revise these patches a little further so that the need for
demux1 and dvr0 is optional, not mandatory on the HVR3000.
HISTORY (darron):
This is the last update to MFE prepared by Hans which is based
upon the `scratchpad' diff created by Carlo.
All MFE work prior to that point must be attributed to Fabio
who ported and maintained Steve's original patch up to that
time.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Ian Armstrong pointed out to me that it is perfectly valid to have a
576 lines YUV video with NTSC output in this particular case. In fact,
without this the X driver for ivtv does not function properly.
Reverted my earlier change that restrictred the height to 480 for NTSC
and add the comments provided by Ian to explain what is happening here.
Priority: normal
Thanks-to: Ian Armstrong <ian@iarmst.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Ian Armstrong <ian@iarmst.demon.co.uk>
Modifies behaviour of a failed dma write() operation for the yuv device.
If the dma transfer for the yuv device fails, the write() operation will now
exit immediately.
Priority: normal
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Oleg Roitburd <oroitburd@gmail.com>
Added support for Prof 7300 DVB-S/S2 card. The card
based on cx24116 demodulator.
Signed-off-by: Oleg Roitburd <oroitburd@gmail.com>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx24116: Change the default SNR units back to percentage by default.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
S2API: Return error of the caller provides 0 commands.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
A user tuning DVB-T via the S2API reports that this was not implemented,
and his tuning was failing.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
Tuning DVB-T via the S2API was failing, missing some essential items.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
Reports from users that using the new API for tuning DTV was failing,
and the cache was missing some essential items.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
I've retained the older percentage code after discussing this with
Darron Broad, but made the ESNO option default.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
