summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2008-01-13tda18271: provide a choice whether to perform rf cal on init or on first tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-13tda18271: test RF_CAL_OK to see if we need additional RF calibrationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-13tda18271: put the device in standby mode during sleep()Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add function, tda18271_set_standby_mode. During sleep, enter standby mode with slave tuner output enabled, loop through on and xtal oscillator on. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: report when the RF tracking filter calibration has completedMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-09tda18271: clean up chip id logic in tda829x_releaseMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This test is easier to read. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-08tda18271: give calibration debug a separate debug maskMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We don't usually want to see the calibration debug messages, but sometimes it is useful. Assign it to a separate debug mask. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-08tda18271: add support for fm radioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: share state between analog and digital tuner instancesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: use a mutex to protect state in critical sectionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: store frequency and bandwidth after successful tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store last tuned frequency & bandwidth after successful tune. Clean up tune functions -- remove pointer to tune function in state structure, instead call tune function based on priv->id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: clean up calibration initialization proceduresMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Always initialize registers during attach. Perform IR Calibration during init if needed. Perform RF Calibration during init if needed for C2, only. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05merge: http://linuxtv.org/hg/~mkrufky/pendingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05merge: http://linuxtv.org/hg/~mkrufky/tda18271c2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Add Radio support for em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Properly implement 12MHz I2S supportMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05There isn't a MTS radio firmwareMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Try to load non-MTS firmware instead. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Fix radio set frequency logicMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05tda18271: fix analog tuning regression caused by earlier changesetMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> An earlier patch, "tda18271: fail table lookups if frequency is out of range" broke analog support on certain hardware. This patch fixes that problem, by allowing the RF_CAL byte to be set to the maximum value, in cases of the frequency being out of range. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05Add code for autoloading em28xx-alsa, if neededMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Older em28xx devices does implement standard Audio Class. However, on newer devices, this were replaced by a Vendor Class. This patch autodetects that an em28xx lacks Audio Class and auto-loads em28xx-alsa, for the devices that implements only a Vendor Class. For devices with Audio Class, snd-usb-audio module will provide an ALSA interface. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Integrates em28xx-audio.c into em28xx kernel moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also fixes the remaining CodingStyle issues that Lindent didn't fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Lindent em28xx-audio.cMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Adds em28xx-audio moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> em28xx-audio module exports em28xx Vendor Class audio as an -alsa driver. This module were written based on usbaudio driver by Markus Rechberger. Recently, he acked to allow us to merge it on kernel: http://lists-archives.org/video4linux/20408-supporting-prolink-pixelview-405-dvd-maker.html Thanks to Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05HVR950 requires additional settings for audio to properly workMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those commands. Also, MTS firmware is required for audio to work on HVR950. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Improve audio setup handlingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> It is possible to select audio inputs via em28xx or via ac97 functions. This patch allows configuring a board to use either one way. It also do some cleanups at audio setup configurations. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-02tda18271: document debug level and configuration parametersMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Document debug level module options and tda18271_config attach-time parameters. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: store IF frequency in a u16 instead of u32Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: allow device-specific configuration of IF frequency and std bitsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: move common code to tda18271-common.cMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move some common code to a new file to make this easier to look at. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add support for NXP TDA18271HD/C2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add MODULE_VERSIONMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> version 0.1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: clean up function tda18271_set_analog_paramsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> make set_analog_params function look consistent with set_params function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01Fix in-kernel ivtv compilationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to tuner-xc2028.h, some extra directories should be added at .h search. CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-29tda18271: fail table lookups if frequency is out of rangeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/cx23885Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-28merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27merge: http://linuxtv.org/hg/~mkrufky/fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Fix a few issues at the bttv conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> bttv driver is working as previously. An additional gain of about 1,5Kb were obtained with the driver conversion to vidioc_ioctl2: text data bss dec hex filename 89208 40244 57556 187008 2da80 old/bttv.ko 88960 38740 57556 185256 2d3a8 new/bttv.ko (measured on a x86_64) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Preserve the previous order to make easier to check the conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Replace vidioc_ to bttv_Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since there are a few vidioc_ functions that were exported, rename those functions to bttv_ in order to avoid poluting namespace. The other functions were also renamed, to standardize inside the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1500Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27Converted bttv to use video_ioctl2Mauro Carvalho Chehab
From: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: add missing subsystem IDs for Hauppauge HVR1500 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1250Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1800Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: add missing subsystem ID for Hauppauge HVR1800 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27xc5000: Removed erroneous definesSteven Toth
From: Steven Toth <stoth@hauppauge.com> Basic cleanup. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-25tda18271: break calculation functions out of tda18271_tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Break out the following new functions from tda18271_tune: tda18271_calc_bp_filter tda18271_calc_km tda18271_calc_rf_band tda18271_calc_gain_taper tda18271_calc_ir_measure tda18271_calc_rf_cal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-25tda18271: improve printk macrosMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 19:22:52 +0000