Age | Commit message (Collapse) | Author |
|
From: Guennadi Liakhovetski <lg@denx.de>
This camera is rather similar to MT9M001, but also has a couple of
enhanced features, like pixel binning.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
drivers/media/video/Kconfig | 6 +
drivers/media/video/Makefile | 1 +
drivers/media/video/mt9t031.c | 736 +++++++++++++++++++++++++++++++++++++++
include/media/v4l2-chip-ident.h | 1 +
4 files changed, 744 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/video/mt9t031.c
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Don't modify driver's state in try_fmt, just verify format acceptability
or adjust it to driver's capabilities.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/ov772x.c | 55 ++++++++++++++++++++++++++---------------
1 files changed, 35 insertions(+), 20 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/ov772x.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/ov772x.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
priv->scale is checked in start_capture.
Therefore, it should be NULL if failing in set_fmt.
This patch resolve this problem.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/tw9910.c | 22 ++++++++++++++++------
1 files changed, 16 insertions(+), 6 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
This patch adds tw9910 driver that use soc_camera framework.
It was tested on SH Migo-r board and mplayer.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/Kconfig | 6 +
drivers/media/video/Makefile | 1 +
drivers/media/video/tw9910.c | 941 +++++++++++++++++++++++++++++++++++++++
include/media/tw9910.h | 39 ++
include/media/v4l2-chip-ident.h | 3 +
5 files changed, 990 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/video/tw9910.c
create mode 100644 include/media/tw9910.h
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/sh_mobile_ceu_camera.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
|
|
From: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
|
|
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
sh_mobile_ceu_camera.c is already prepared to support interlaced format, this
patch moves the choice of a field type down to host and / or camera drivers.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/pxa_camera.c | 10 ++++++++++
drivers/media/video/soc_camera.c | 19 +------------------
2 files changed, 11 insertions(+), 18 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/sh_mobile_ceu_camera.c | 56 +++++++++++++++++++++++-----
1 files changed, 46 insertions(+), 10 deletions(-)
|
|
From: Magnus Damm <damm@igel.co.jp>
This patch cleans up the sh_mobile_ceu driver and adds comments and
constants to clarify the magic sequence in sh_mobile_ceu_capture().
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/sh_mobile_ceu_camera.c | 51 ++++++++++++++++------------
1 files changed, 29 insertions(+), 22 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
This patch presents new method to be able to select V4L2 input type
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/soc_camera.c | 17 +++++++++++++----
include/media/soc_camera.h | 1 +
2 files changed, 14 insertions(+), 4 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
This patch presents new method to be able to check v4l2_std_id
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/soc_camera.c | 9 ++++++++-
include/media/soc_camera.h | 1 +
2 files changed, 9 insertions(+), 1 deletions(-)
|
|
From: Magnus Damm <damm@igel.co.jp>
This patch adds NV16/NV61 support to the sh_mobile_ceu driver.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/sh_mobile_ceu_camera.c | 22 ++++++++++++++++++++--
1 files changed, 20 insertions(+), 2 deletions(-)
|
|
From: Magnus Damm <damm@igel.co.jp>
This patch adds NV12/NV21 support to the sh_mobile_ceu driver.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/sh_mobile_ceu_camera.c | 114 ++++++++++++++++++++++++----
1 files changed, 99 insertions(+), 15 deletions(-)
|
|
From: Guennadi Liakhovetski <lg@denx.de>
Move mutex from host drivers to camera device object, take into account
videobuf locking.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
---
drivers/media/video/pxa_camera.c | 15 ++---
drivers/media/video/sh_mobile_ceu_camera.c | 9 +--
drivers/media/video/soc_camera.c | 99 +++++++++++++++++++++++-----
include/media/soc_camera.h | 8 ++-
4 files changed, 96 insertions(+), 35 deletions(-)
|
|
From: Magnus Damm <damm@igel.co.jp>
Add clock framework support to the sh_mobile ceu and
adjust the board specific code accordingly.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
kernel-sync:
---
|
|
From: Guennadi Liakhovetski <lg@denx.de>
With the introduction of the format conversion support in soc-camera, we now
also have to take care to pass the correct pixel format to the camera driver
when calling its try_fmt() method.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
---
drivers/media/video/pxa_camera.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
|
|
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Simplify multiple drivers by replacing f->fmt.pix.* with a single pointer
dereference, merge some needlessly broken lines, verify host and camera
operations pointers on registration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m001.c | 20 ++++----
drivers/media/video/mt9m111.c | 10 ++--
drivers/media/video/mt9v022.c | 20 ++++----
drivers/media/video/pxa_camera.c | 21 +++-----
drivers/media/video/soc_camera.c | 74 +++++++++++++++++------------
drivers/media/video/soc_camera_platform.c | 5 +-
6 files changed, 81 insertions(+), 69 deletions(-)
|
|
From: Magnus Damm <damm@igel.co.jp>
This patch converts the sh_mobile_ceu driver to make use
of the new pixel format translation code. Only pass-though
mode at this point.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/sh_mobile_ceu_camera.c | 83 +++++++++++++++++++---------
1 files changed, 57 insertions(+), 26 deletions(-)
|
|
From: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/Kconfig | 4 ++--
drivers/media/video/mt9m111.c | 28 ++++++++++++++++------------
2 files changed, 18 insertions(+), 14 deletions(-)
|
|
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Using PXA270's FIFO inactivity time-out register (CITOR) reduces FIFO overruns.
The time-out is calculated in CICLK / LCDCLK ticks and has to be longer than
one pixel time. For this we have to know the pixel clock frequency, which
usually is provided by the camera. We use the struct soc_camera_sense to
request PCLK frequency from the camera driver upon each data format change.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
drivers/media/video/pxa_camera.c | 90 +++++++++++++++++++++++++++++---------
1 files changed, 69 insertions(+), 21 deletions(-)
|
|
From: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m111.c | 28 +++++++++++++++++++++++++++-
1 files changed, 27 insertions(+), 1 deletions(-)
|
|
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
As reported by Antonio Ospite <ospite@studenti.unina.it> two platforms with a
mt9m111 camera require opposite pixel clock polarity, which means one of them
inverts it. This patch adds support for inversion flags and switches all
available camera drivers to using them.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m001.c | 15 +++++++--------
drivers/media/video/mt9m111.c | 6 +++++-
drivers/media/video/mt9v022.c | 3 +++
drivers/media/video/ov772x.c | 10 +++++-----
drivers/media/video/soc_camera.c | 34 ++++++++++++++++++++++++++++++++++
include/media/soc_camera.h | 11 +++++++++++
6 files changed, 65 insertions(+), 14 deletions(-)
|
|
From: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
From: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
kernel-sync:
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/ov772x.c | 22 ++++++++++++++++++++++
include/media/v4l2-chip-ident.h | 1 +
2 files changed, 23 insertions(+), 0 deletions(-)
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/ov772x.c | 21 +++------------------
1 files changed, 3 insertions(+), 18 deletions(-)
|
|
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Testing for non-NULL platform-data is not enough, we have to check if the GPIO
in the platform data is valid or not. Also see my earlier patch:
[ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m001.c | 5 +++--
drivers/media/video/mt9v022.c | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
|
|
From: Robert Jarzmik <robert.jarzmik@free.fr>
The Micron mt9m111 offers 4 byte orders for YCbCr
output. This patchs adds all possible outputs capabilities
to the mt9m111 driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m111.c | 24 +++++++++++++++++++++++-
1 files changed, 23 insertions(+), 1 deletions(-)
|
|
From: roel kluin <roel.kluin@gmail.com>
unsigned >= 0 is always true and fix formula
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m111.c | 13 +++++--------
1 files changed, 5 insertions(+), 8 deletions(-)
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
The em28xx driver can be coupled to an anciliary AC97 chip. This patch
allows read/write AC97 registers directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
vidioc_g_ctrl() were using an uneeded confusing logic. Instead, use the
direct approach.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Added all missing v4l1/2 ioctls and fix several broken conversions.
Partially based on work done by Cody Pisto <cpisto@gmail.com>.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Brandon Jenkins <bcjenkins@tvwhere.com>
|
|
From: Andy Walls <awalls@radix.net>
Use a consistent crystal value of 28.636360 MHz for computing all PLL
parameters so clocks don't have relative error due to assumed crystal
value mismatches. Also aimed to have all PLLs run their VOCs at close to
400 MHz to minimze the error of these PLLs as frequency synthesizers. Also
set the VDCLK and AIMCLK PLLs to sane values before the APU and CPU firmware
are loaded. Also fixed I2S Master clock dividers.
Many thanks to Mike Bradley and Jeff Campbell for reporting this problem and
suggesting the solution, researching and experimenting, and performing
extensive testing to support their suggested solution.
Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Reported-by: Mike Bradley <mike.bradley@incanetworks.com>
Priority: normal
Signed-off-by: Andy Walls <awalls@radix.net>
|
|
From: Andy Walls <awalls@radix.net>
Disable AV_LOCK, locking of audio PLL to video PLL in the cx18-av-core for
analog captures. It seems to have adverse effects on captures from
SVideo and CVBS sources with current clock & crystal settings in the driver.
Many thanks to Jeff Campbell and Mike Bradley for reporting this problem,
and suggesting the solution and performing extensive testing to support their
suggestion.
Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Reported-by: Mike Bradley <mike.bradley@incanetworks.com>
Priority: normal
Signed-off-by: Andy Walls <awalls@radix.net>
|
|
From: Randy Dunlap <randy.dunlap@oracle.com>
Fix drivers/media/video/tuner-core.c so that it will build when
CONFIG_VIDEO_ALLOW_V4L1=n:
drivers/media/video/tuner-core.c:1111: error: 'tuner_ioctl' undeclared here (not in a function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Alan Nisota <alannisota@gmail.com>
This patch converts the gp8psk module to use the S2API.
It pretends to be DVB-S2 capable in order to allow the various
supported modulations (8PSK, QPSK-Turbo, etc), and keep software
compatibility with the S2API patches for Mythtv and VDR.
Signed-off by: Alan Nisota <alannisota@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch uses the same code for enumberating video formats that are
present on cx88, bttv and saa7134 drivers.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
The changeset 78aa52a159cf introduced a bug on em28xx: buffer setup should be
awaking xc3028. Instead, since we didn't specify the tuner mode, the device
were going to sleep, due to the lack of tuner mode when asking tuner to handle
VIDIOC_S_FREQUENCY:
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
xc2028 0-0061: divisor= 00 00 14 d0 (freq=83.250)
xc2028 0-0061: Putting xc2028/3028 into poweroff mode.
xc2028 0-0061: Printing sleep stack trace:
Pid: 10936, comm: mplayer Tainted: P M 2.6.27.8 #1
Call Trace:
[<ffffffffa0b759ea>] xc2028_sleep+0x89/0x1ab [tuner_xc2028]
[<ffffffffa0b48fb9>] tuner_s_frequency+0xf5/0x165 [tuner]
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
get_index requires a valid parent device in order to discover which
indices are in use. Some drivers (e.g. pvrusb2) do not set the parent
device. In that case just return 0.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|