| Age | Commit message (Collapse) | Author |
|---|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The saa6752hs module needs this.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: high
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The zoran driver does a module_get/put of THIS_MODULE on device open/close.
This isn't necessary as the kernel does this automatically.
Clean up the failure path of zoran_open() somewhat.
Make the dprintk()s on open/close a higher debug level and make the user
count printed take the current open/close into account.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The driver should only use the kernel mapped io address, zr36057_mem, and
not the PCI bus address, zr36057_adr. Since the latter is only printed out
once, there is no need to save it in the driver data structure.
There was some old code that looked like it was for the Alpha architecture
which would use the PCI bus address. It probably no longer applies to
modern kernels.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Instead of using custom code, just let the device layer look it up for us
from the pci device table. This requires extending the pci device table to
list each known card, plus a catch-all entry for the cards that don't have
sub-system vendor/device data.
Improve some of the info and error messages too.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The driver was keeping a global array with an entry for each zoran device
probed. It was a leftover from when the driver didn't dynamically allocate
the driver data for each device.
There was only one use left, in the video device's ->open() method, looking
up the struct zoran for the opened device from the minor number. This can
be done better with video_get_drvdata().
Since zoran_num is now only used in the pci driver's ->probe() method, it
doesn't need to be an atomic_t and be static. There is a race if multiple
zoran cards could be probed at the same time, but currently the probe
method for a given driver is single threaded.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
When initializing a module parameter that is a per-card array, use
"{ [0 ... (BUZ_MAX-1)] = -1 }" instead of "{ -1, -1, -1, -1 }". This way
all of the entries will be correctly set to -1 if someone changes BUZ_MAX
to a value other than 4.
Adjust some of the parameter help text too.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Commited patch 0a97a636c31e wasn't the latest version of the patch. This
fixes some problems with it and should be folded into it.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
|
|
From: Nam Phạm Thành <phamthanhnam.ptn@gmail.com>
This patch adds support for Philips webcam snapshot button as an
event input device, for consistency with other webcam drivers.
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Andy Walls <awalls@radix.net>
On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote:
> With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel
> [ 14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded
> [ 14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared
> [ 14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
> [ 14.555374] cx88[0]/2: cx2388x based DVB/ATSC card
> [ 14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000
> [ 14.555560] IP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4
> [ 14.555652] *pde = 00000000
> [ 14.555735] Oops: 0002 [#1] SMP
> [ 14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys
> [ 14.557013]
> [ 14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1)
> [ 14.557013] EIP: 0060:[<c02e6bff>] EFLAGS: 00010246 CPU: 1
> [ 14.557013] EIP is at __mutex_lock_common+0x3c/0xe4
> [ 14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000
> [ 14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88
> [ 14.557013] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> [ 14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000)
> [ 14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110
> [ 14.557013] de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8
> [ 14.557013] e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000
> [ 14.557013] Call Trace:
> [ 14.557013] [<c02e6d38>] ? __mutex_lock_slowpath+0x17/0x1a
> [ 14.557013] [<c02e6b88>] ? mutex_lock+0x12/0x14
> [ 14.557013] [<c02e6b88>] ? mutex_lock+0x12/0x14
> [ 14.557013] [<e1ac7115>] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb]
> [ 14.557013] [<e1aeca62>] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb]
> [ 14.557013] [<e09ee41e>] ? cx8802_register_driver+0xbd/0x1ac [cx8802]
> [ 14.557013] [<e09ee467>] ? cx8802_register_driver+0x106/0x1ac [cx8802]
> [ 14.557013] [<e1aee37f>] ? dvb_init+0x22/0x27 [cx88_dvb]
> [ 14.557013] [<c0101132>] ? _stext+0x42/0x11a
> [ 14.557013] [<e1aee35d>] ? dvb_init+0x0/0x27 [cx88_dvb]
> [ 14.557013] [<c013d2ca>] ? __blocking_notifier_call_chain+0xe/0x51
> [ 14.557013] [<c014970b>] ? sys_init_module+0x8c/0x17d
> [ 14.557013] [<c0103b42>] ? syscall_call+0x7/0xb
> [ 14.557013] [<c013007b>] ? round_jiffies_relative+0x14/0x16
> [ 14.557013] =======================
> [ 14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0
> [ 14.557013] EIP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88
> [ 14.565211] ---[ end trace 94d8b014e067ac7b ]---
This patch provides a proper locking for frontends allocation
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Jean Delvare <khali@linux-fr.org>
CC: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
This is a really old and crufty driver that wasn't using the long
established pci driver framework.
Priority: normal
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch adds the capability of selecting between 4 different inputs
on vivi driver. Input 0 is the normal color bar, while inputs 1-3 are
modified color bars.
This allows testing input selection on userspace applications and
serves as an implementation model for other drivers.
The current approach allows a maximum of 10 different inputs, since the
input name generator assumes that we need just one digit to present the
input. It shouldn't be hard to modify it to present a bigger name of
inputs, but, in fact, it doesn't make much sense of doing it for this
test driver.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Andy Walls <awalls@radix.net>
When enabling a shared IRQ line, then saa7134_irq handler could be invoked
before the driver had completely set up internal structures, due to a shared
interrupt line firing. Clear the saa7134 interrupt status reg, before
requesting the irq line, so that stale IRQ status isn't processed before the
internal structures are set up.
Marcin Slusarz recently brought this Oops to the attention of the v4l-dvb
lists and provided an initial analysis by investigating reports found here:
http://kerneloops.org/guilty.php?guilty=mute_input_7133&version=2.6.27-release&start=1802240&end=1835007&class=oops
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Priority: normal
Signed-off-by: Andy Walls <awalls@radix.net>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Martin Dauskardt <martin.dauskardt@gmx.de>
Register 0x2d has to be set differently in the saa7129 compared to the
saa7127. This was not done correctly, so S-Video was broken in certain
circumstances.
This fixes a regression introduced in 2.6.28.
Priority: high
Signed-off-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
From: Andy Walls <awalls@radix.net>
Analog support for HVR-1250 has not been completed, but does exist for
the HVR-1800.
Since both cards use the same driver, it tries to create the analog
dev for both devices, which is not possible.
This causes a NULL error to show up in video_open and mpeg_open.
-Mark
Iterations through the cx23885_devlist must check for NULL
pointers as some supported devices only have DVB support at the moment.
Mark Jenks encoutered an Oops in a system with both an HVR-1250 and HVR-1800
installed.
-Andy
Reported-by: Mark Jenks <mjenks1968@gmail.com>
Priority: normal
Tested-by: Mark Jenks <mjenks1968@gmail.com>
Signed-off-by: Mark Jenks <mjenks1968@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
If Hauppauge eeprom is corrupted, the driver returns tuner = 0, instead
of TUNER_ABSENT.
This makes the drivers to initialize tuner, instead of handling the
manual parameter.
Since the tuner core rejects that a tuner to have their type changed,
this breaks the manual tuner override.
Priority: high
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Changeset 60b4bde48b36c0315ef41fd38c339b9c7e68c46f removed an unused
struct on zoran driver, when compiled with "Y".
However, as pointed by Jean Delvare <khali@linux-fr.org>, this is
neeeded when the driver is compiled as a module, since udev relies on it
to auto-load the module.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Author: Tejun Heo <htejun@gmail.com>
poll: allow f_op->poll to sleep
f_op->poll is the only vfs operation which is not allowed to sleep. It's
because poll and select implementation used task state to synchronize
against wake ups, which doesn't have to be the case anymore as wait/wake
interface can now use custom wake up functions. The non-sleep restriction
can be a bit tricky because ->poll is not called from an atomic context
and the result of accidentally sleeping in ->poll only shows up as
temporary busy looping when the timing is right or rather wrong.
This patch converts poll/select to use custom wake up function and use
separate triggered variable to synchronize against wake up events. The
only added overhead is an extra function call during wake up and
negligible.
This patch removes the one non-sleep exception from vfs locking rules and
is beneficial to userland filesystem implementations like FUSE, 9p or
peculiar fs like spufs as it's very difficult for those to implement
non-sleeping poll method.
While at it, make the following cosmetic changes to make poll.h and
select.c checkpatch friendly.
* s/type * symbol/type *symbol/ : three places in poll.h
* remove blank line before EXPORT_SYMBOL() : two places in select.c
Oleg: spotted missing barrier in poll_schedule_timeout()
Davide: spotted missing write barrier in pollwake()
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Jean-Francois Moine <moinejf@free.fr>
The returned value of i2c read is a 16 bits word. It was stored in
a 8 bits variable, preventing a sensor to be detected.
Priority: normal
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
|
|
From: Alexey Klimov <klimov.linux@gmail.com>
Patch removes err() macros from few usb devices.
It places pr_err in pvrusb2-v4l2.c, dev_err in dabusb and in usbvision
drivers. Beside placing dev_err, patch defines new s2255_dev_err macro
with S2255_DRIVER_NAME in s2255 module.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Thierry Merle <thierry.merle@free.fr>
Acked-By: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Douglas Kosovic <douglask@itee.uq.edu.au>
It's a quad Bt878 PCI-e x1 capture board that's basically the same as the
IVC-200 (quad Bt878 PCI) capture board that's currently supported in
the V4L2 bttv driver.
Manufacturer's web page for IVCE-8784 with photo and info:
http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784
Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Patch removes err() macros from few usb devices.
It places pr_err in pvrusb2-v4l2.c, dev_err in dabusb and in usbvision
drivers. Beside placing dev_err, patch defines new s2255_dev_err macro
with S2255_DRIVER_NAME in s2255 module.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Thierry Merle <thierry.merle@free.fr>
Acked-By: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Laurent Pinchart <laurent.pinchart@skynet.be>
The dynamically allocated input_dev->phys buffer isn't freed when
unregistering the device. As the input layer doesn't provide any release
callback, use a fixed-size buffer inside the uvc_device structure.
Priority: normal
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Antti Palosaari <crope@iki.fi>
First control messages to the stick timeouts very often due to probable
hw bug. Repeat first message few times if it fails as workaround.
Priority: high
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Andy Walls <awalls@radix.net>
Card report provided by Patryk on the ivtv-devel list:
http://ivtvdriver.org/pipermail/ivtv-devel/2009-January/005922.html
Reported-by: Pat <tatyrza@mm.pl>
Priority: normal
Signed-off-by: Andy Walls <awalls@radix.net>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The conversion to video_ioctl2 is the first phase to converting this driver
to the latest v4l2 framework.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Laurent Pinchart <laurent.pinchart@skynet.be>
URB buffers for video transfers are sized to UVC_MAX_PACKETS bulk/isochronous
packets by default. If the system is too low on memory try successively
smaller numbers of packets until allocation succeeds.
Priority: normal
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The default case of the switch didn't unlock the mutex.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
