summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2008-06-25ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is not defined.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Thanks to Randy Dunlap for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-24cx18: Improve Raptor card audio input routing defintionsAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Improved Raptor card audio input routing defintions, so that muxer values matched cx18_gpio() values for tuner, line in 1, and radio and added LED indication of selected audio input. Audio line in 2 doesn't work as it uses the not yet supported 2nd I2S port. Tuner/FM Radio AF is mono until SIF support is fixed. Signed-off-by: Andy Walls <awalls@radix.net>
2008-06-24videodev: simplify get_index()Brandon Philips
Use Hans Verkuil's suggested method of implementing get_index which doesn't depend on class_for_each_device and instead uses the video_device array. This simplifies the code and reduces its memory footprint. Signed-off-by: Brandon Philips <bphilips@suse.de>
2008-07-17btaudio/tvmixer/miropcm20-rds: fix 2.6.16 compilationHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Missed a few warnings, this patch fixes them. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17videodev: add support for kernels < 2.6.19Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add the necessary compatibility code to handle the struct device/struct class_device differences. It was too much work (with uncertain benefits) to convert several drivers to handle kernels <2.6.19, so they are not built on these older kernels. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17videodev/dabusb/dvbdev: fix 2.6.16 compilationHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> struct file_operations was made const in 2.6.17. Cast const away when compiling under 2.6.16. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17gspca/tea575x-tuner: fix compilation for kernels <= 2.6.17Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17cx18/smsusb: fix compile errors when building for kernels < 2.6.19Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17v4l-dvb: fix compilation issues for kernel 2.6.21Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - fix unused function warnings in v4l2-i2c-drv.h and v4l2-i2c-drv-legacy.h - fix ivtvfb.c compile warning that would in fact lead to an oops - disable DVB_DRX397XD for kernels <= 2.6.21: it needs div64_64 Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17mt9m001/saa7127: fix 2.6.25 kernel build warning/error.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Allow these to build for kernels < 2.6.26. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17ov7670: fix compile warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17saa7115: use saa7115_auto instead of saa711x as the autodetect driver name.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Having an _auto suffix is less ambiguous than a 'saa711x' identifier. It's also used like this in the saa7127 driver. Thanks to Jean Delvare for suggesting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17saa7127: Make device detection optionalHans Verkuil
From: Jean Delvare <khali@linux-fr.org> The saa7127 driver supports all of SAA7126, SAA7127, SAA7128 and SAA1729 devices. Declare all these devices, so that board drivers can tell which device is present, instead of always relying on auto-detection (which needs to write to the chip, eek!). We still need the detection for ivtv, so a special device name "saa7127_auto" can be used when the caller doesn't know exactly which device is present. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setupHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Same issue as for cx25840: this function sets up the standard timings and has nothing to do with VBI setup. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17ivtv/cx18: ensure the default control values are correctHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> For several MPEG controls and the volume control the default as returned by VIDIOC_QUERYCTRL was incorrect and did not match the actual initial value. This is now fixed for cx18 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setupHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> cx25840_vbi_setup has nothing to do with setting up VBI, but everything with setting up the standard. Move to cx25840-core.c and rename. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17soc_camera_platform: Add SoC Camera Platform driverMagnus Damm
This patch adds a simple platform camera device. Useful for testing cameras with SoC camera host drivers. Only one single pixel format and resolution combination is supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- drivers/media/video/Kconfig | 6 drivers/media/video/Makefile | 1 drivers/media/video/soc_camera_platform.c | 198 +++++++++++++++++++++++++++++ include/media/soc_camera_platform.h | 15 ++ 4 files changed, 220 insertions(+)
2008-07-17sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3Magnus Damm
This is V3 of the SuperH Mobile CEU soc_camera driver. The CEU hardware block is configured in a transparent data fetch mode, frames are captured from the attached camera and written to physically contiguous memory buffers provided by the newly added videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- Changes since V2: - remove SUPERH Kconfig dependency - move sh_mobile_ceu.h to include/media - add board callback support with enable_camera()/disable_camera() - add support for declare_coherent_memory - rework video memory limit - more verbose error messages Changes since V1: - fixed the CEU driver to work with the newly updated patches drivers/media/video/Kconfig | 8 drivers/media/video/Makefile | 1 drivers/media/video/sh_mobile_ceu_camera.c | 657 ++++++++++++++++++++++++++++ include/media/sh_mobile_ceu.h | 12 4 files changed, 678 insertions(+)
2008-07-16videobuf: Add physically contiguous queue code V3Magnus Damm
This is V3 of the physically contiguous videobuf queues patch. Useful for hardware such as the SuperH Mobile CEU which doesn't support scatter gatter bus mastering. Since it may be difficult to allocate large chunks of physically contiguous memory after some uptime due to fragmentation, this code allocates memory using dma_alloc_coherent(). Architectures supporting dma_declare_coherent_memory() can easily avoid fragmentation issues by using dma_declare_coherent_memory() to force dma_alloc_coherent() to allocate from a certain pre-allocated memory area. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- Changes since V2 - use dma_handle for physical address - use "scatter gather" instead of "scatter gatter" Changes since V1: - use dev_err() instead of pr_err() - remember size in struct videobuf_dma_contig_memory - keep struct videobuf_dma_contig_memory in .c file - let videobuf_to_dma_contig() return dma_addr_t - implement __videobuf_sync() - return statements, white space and other minor fixes drivers/media/video/Kconfig | 5 drivers/media/video/Makefile | 1 drivers/media/video/videobuf-dma-contig.c | 417 +++++++++++++++++++++++++++++ include/media/videobuf-dma-contig.h | 32 ++ 4 files changed, 455 insertions(+)
2008-07-16videobuf: Fix gather spellingMagnus Damm
Use "scatter gather" instead of "scatter gatter". Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- drivers/media/video/videobuf-dma-sg.c | 2 +- drivers/media/video/videobuf-vmalloc.c | 2 +- include/media/videobuf-dma-sg.h | 2 +- include/media/videobuf-vmalloc.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
2008-07-11soc_camera: Move spinlocksMagnus Damm
This patch moves the spinlock handling from soc_camera.c to the actual camera host driver. The spinlock_alloc/free callbacks are replaced with code in init_videobuf(). So far all camera host drivers implement their own spinlock_alloc/free methods anyway, and videobuf_queue_core_init() BUGs on a NULL spinlock argument, so, new camera host drivers will not forget to provide a spinlock when initialising their videobuf queues. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- drivers/media/video/pxa_camera.c | 17 ++++------------ drivers/media/video/soc_camera.c | 39 -------------------------------------- include/media/soc_camera.h | 5 ---- 3 files changed, 7 insertions(+), 54 deletions(-)
2008-07-11soc_camera: make videobuf independentPaulius Zaleckas
Makes SoC camera videobuf independent. Includes all necessary changes for PXA camera driver (currently the only driver using soc_camera in the mainline). These changes are important for the future soc_camera based drivers. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
2008-06-23bttv: allow debug ioctl'sMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22 Fix open/close race in saa7134Mauro Carvalho Chehab
From: Arjan van de Ven <arjan@linux.intel.com> The saa7134 driver uses a (non-atomic) variable in an attempt to only allow one opener of the device (how it deals with sending the fd over unix sockets I don't know). Unfortunately, the release function first decrements this variable, and THEN goes on to disable more of the device. This allows for a race where another opener of the device comes in after the decrement of the variable, configures the hardware just to then see the hardware be disabled by the rest of the release function. This patch makes the release function use the same lock as the open function to protect the hardware as well as the variable (which now at least has some locking to protect it). Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22xc2028 unaligned access fixesMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22WRITE_RPS1() converts to le32 itselfMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> ... but two ancient drivers had not noticed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22zoran annotations and fixesMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22cx23885 endianness fixesMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22bt8xx endianness annotations and fixesMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22dmx_write: memcpy from user-supplied pointerMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> ... copy to kernel memory first Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22split dvb_ringbuffer dual-use functionsMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> split the suckers into kernel-memory and user-memory versions, annotate both properly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22pluto_set_dma_addr() fixMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> bogus cpu_to_le32() when passing dma address to hardware via writel() - writel() converts itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22saa7146: ->cpu_addr and friends are little-endianMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Annotations + stop saa7146_i2c from playing fast and loose with reuse of ->cpu_addr for host-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22net endianness fixMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> According to RFC 4326 (4.1) D-bit is MSB in net-endian 16bit. dvb_net.c did /* Set D-bit for CRC32 verification, * if it was set originally. */ ulen |= 0x0080; which works of little-endian (htons(1<<15) is 0x0080 there), but breaks on big-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26This driver adds support for the Sensoray 2255 devices.Mauro Carvalho Chehab
From: Dean Anderson <dean@sensoray.com> It was primarily developed by Dean Anderson with only a little bit of guidance and cleanup by Greg. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-28Add LifeVideo To-Go Cardbus PCI IDMauro Carvalho Chehab
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-28Add support for em2860 based PointNix Intra-Oral CameraMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> em28xx-cards.c em28xx-input.c em28xx-video.c em28xx.h - Add support for the PointNix Intra-Oral Camera, which required addition of a construct for reading the "snapshot" button (provided on the em2860 and em2880 chips, but this is the first case where I have seen it actually used in a product). The button is wired to pin 56 on the em2880. http://www.pointnix.com/ENG/dental/product_02.asp Thanks to Roberto Mantovani <rmantovani@libero.it> for testing the changes Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22cx18: improve support for the Raptor board.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - add radio definition - reset the audio firmware (required for this board, harmless for the others) Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22ivtv/cx18: improve tuner std check in card definitions.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22cx2341x: add TS capabilityHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The cx18 can support transport streams with newer firmwares. Add a TS capability to the generic cx2341x module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22cx18/ivtv: ioctl debugging improvementsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Completely rely on the video_ioctl2 debugging facilities rather than doing it ourselves. Fill in some missing fields in ivtv with VIDIOC_G_FBUF. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22videodev: fix/improve ioctl debuggingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Various ioctl debugging fixes and improvements: - use %x rather than %d for control IDs and bitmask fields - make two arrays const - show the whole control array for the ext_ctrl ioctls - print pix_fmt for V4L2_BUF_TYPE_VIDEO_OUTPUT - show full type name rather than an integer - fix CROPCAP debugging - fix G/S_TUNER debugging - show error code in case of an error - other small cleanups Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22tcm825x: fix compile warning with kernels < 2.6.26.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22videodev: fix compilation issue for kernels < 2.6.25Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-22 V4L/vivi: fix possible memory leak in vivi_fillbuffMauro Carvalho Chehab
From: Marcin Slusarz <marcin.slusarz@gmail.com> Move allocation after first check and fix memory leak. Noticed-by: Daniel MarjamÀki <danielm77@spray.se> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22merge: http://linuxtv.org/hg/~mkrufky/hvr950qMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-21xc5000: add module option to load firmware during driver attachMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The xc5000 firmware download process can be slow on certain devices. Add a module option, "init_fw" to perform the firmware download during xc5000_attach(), which would get the firmware download over with well before any tune request is made. When this option is enabled, it will reduce the time it takes to get a signal lock during the first tune after driver load, but will add a few seconds to the driver initialization. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-21xc5000: check device hardware state to determine if firmware download is neededMichael Krufky
From: Steven Toth <stoth@linuxtv.org> This patch ensures that the xc5000 will have firmware loaded as needed if the part is powered down or reset via gpio from the host. An example of this, in some cases, could be after the system resumes from standby or hibernate modes. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-21au8522: prevent false-positive lock statusMichael Krufky
From: Steven Toth <stoth@linuxtv.org> This decreases scan time in Queens, New York from 28 minutes to 7 minutes, with the exact same services found. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-27 14:13:46 +0000