summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2009-03-10msp3400: remove obsolete V4L1 codeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> There are no drivers left that call msp3400 with V4L1 commands. Remove it from this driver. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-10avoid loading the entire videodev.h header for drivers that are already V4L2 ↵Mauro Carvalho Chehab
only From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10merge: http://linuxtv.org/hg/~mkrufky/dibcomMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10Fix Kbuild MEDIA_TUNER_CUSTOMIZE dependenciesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10dib0700: enable DVB_FE_CUSTOMISE for dibcom frontendsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> There was never any build-time dependency of the dib0700 usb module on the dib0070 tuner module. Now that the build-time dependencies of dib0700 on dib3000mc, dib7000p and dib7000m have been removed in the previous changesets, we can enable DVB_FE_CUSTOMISE for these modules under config DVB_USB_DIB0700 Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-10/frontends/Kconfig: Move af9013 Kconfig option to its proper placeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> af9013 is not a development tool. It is, instead, a DVB-T module. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-radioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://linuxtv.org/hg/~mkrufky/saa7134Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-wfMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://udev.netup.ru/hg/v4l-dvb-netupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09v4l2-ioctl: get rid of video_decoder.hMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> The V4L1 obsoleted header video_decoder.h is not used anymore by any driver. Only a name decoding function at v4l2-ioctl still implements it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-vinoMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09ISA radio drivers: improve kernel log messageHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It's much nicer if the log message tells you which io ports are possible, rather than having to run modinfo or look it up in the source or manual. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-09remove dib0070_ctrl_agc_filter from dib0070.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This function prototype is defined but the function itself does not exist. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09cleanup linewraps in dib3000mc.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09cleanup linewraps in dib7000m.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09cleanup linewraps in dib7000p.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08remove build-time dependencies on dib3000mcMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> commit && make && hg push Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-08remove build-time dependencies on dib7000pMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08remove build-time dependencies on dib7000mMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08dvb/frontends: fix duplicate 'debug' symbolMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Fix dvb frontend debug variable to be static, to avoid linker errors: drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug' arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o It would also be Good if arch/x86/kernel/entry_32.S didn't have a non-static 'debug' symbol. OTOH, it helps catch things like this one. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-08pvrusb2: Remove ancient IVTV specific ioctl functionsMike Isely
From: Mike Isely <isely@pobox.com> Remove ancient IVTV_IOC_G_CODEC and IVTV_IOC_S_CODEC ioctl functions from the pvrusb2 driver. These are very very old, were non-standard, and were only present to keep MythTV happy (their implementation did nothing except to report success). That was long ago; no recent versions of MythTV should require this anymore. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-08pvrusb2: Remove old i2c layer; we use v4l2-subdev nowMike Isely
From: Mike Isely <isely@pobox.com> This change removes the old i2c module controlling layer from the pvrusb2 driver. This is code that first had appeared in the driver back in December 2005. It's history. Now we use v4l2-subdev. Please note also that with this change, the driver will no longer be usable in kernels older that 2.6.22. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-08pvrusb2: Implement better reporting on attached sub-devicesMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-08pvrusb2: Fix slightly mis-leading header in debug interface outputMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-08zoran/bt819: use new notify functionality.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Bt819 needs the parent driver to drive a GPIO pin low and high in order to reset its fifo. Use the new notify callback for this. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-08v4l2-ioctl: fix partial-copy code.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The code to optimize the usercopy only checked the ioctl NR field. However, this code is also called for non-V4L2 ioctls (either private or ioctls from linux/dvb/audio.h and linux/dvb/video.h for decoder drivers like ivtv). If such an ioctl has the same NR as a V4L2 ioctl, then disaster strikes. Modified the code to check on the full command ID. Thanks to Martin Dauskardt for tracing the ivtv breakage to this particular change. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-08w9968cf/ovcamchip: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-08w9968cf: add v4l2_device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-07tlv320aic23b: use v4l2-i2c-drv.h instead of drv-legacy.hHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This driver isn't used in any legacy mode, so no need for v4l2-i2c-drv-legacy.h. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-06pvrusb2: Fix space-after-comma idiocyMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Make a bunch of dvb config structures const (trivial)Mike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Convert all device definitions to use new sub-device declarationsMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Define default I2C address for CS53L32A sub-deviceMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Fix incorrectly named sub-device IDMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Define default I2C addresses for msp3400 and saa7115 sub-devicesMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Issue required core init broadcast to all sub-devicesMike Isely
From: Mike Isely <isely@pobox.com> The v4l2-subdev infrastructure requires that an initialization call must be issued to all attached sub-devices before normal operation can start. This change satisfies that requirement. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Implement mechanism to force a full sub-device updateMike Isely
From: Mike Isely <isely@pobox.com> When a pvrusb2 driver instance first initializes, we need to be sure to send out a complete state update for everything to all attached modules. The old i2c layer did this by keeping a separate mask of "stale" bits for each attached module - and setting that mask to all stale when that module attaches. But the new sub-device adaptation I've implemented here no longer has per-module stale bits. So instead there's now a global "force dirty" bit that is set upon instance initialization, before the sub-devices are attached. After the first update, this bit is cleared, allowing for normal update-on-dirty behavior. In this manner, we ensure that all sub-devices have been properly synchronized at initialization. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Correct some trace print inaccuraciesMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Implement trace print for stream on / off actionMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Define default I2C address for cx25840 sub-deviceMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Broadcast tuner type change to sub-devicesMike Isely
From: Mike Isely <isely@pobox.com> The tuner sub-device isn't going to work very well unless we tell it the correct tuner type to use... Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Deal with space-after-comma coding style idiocyMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Sub-device update must happen BEFORE state dirty bits are clearedMike Isely
From: Mike Isely <isely@pobox.com> The sub-device update mechanism relies on various "dirty" bits in the driver in order to know what pieces of state need to be propagated out to the various sub-devices. But that won't work if the dirty bits are cleared before the update gets a chance to run. This change ensures that the update takes place before the dirty bits are cleared. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Allow sub-devices to insert correctlyMike Isely
From: Mike Isely <isely@pobox.com> A sub-device won't successfully attach to our I2C adapter if its class isn't set to zero. Right the class is still set to I2C_CLASS_TV_ANALOG in order to allow the old mechanism to still work. This change temporarily sets the class to zero during the interval when the sub-device attaches. This code will get removed when the old i2c layer is finally removed from the driver. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Fix bugs involved in listing of sub-devicesMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Fix uninitialized counterMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-06pvrusb2: Define default i2c address for wm8775 sub-deviceMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 19:19:56 +0000