summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2008-04-04 soc-camera: extract function pointers from host object into operationsMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Function pointers and the driver owner are not expected to change throughout soc-camera host's life. Extract them into an operations struct. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-03v4l/dvb Kconfig: Fix bugzilla #10067Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> tda8290 breaks if tuner is selected, but CONFIG_DVB=n. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-03merge: http://linuxtv.org/hg/~mkrufky/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-02pvrusb2: New device attribute for encoder usage in digital modeMike Isely
From: Mike Isely <isely@pobox.com> Some tuners seem to not work in digital mode unless the encoder is healthy. Implement a device attribute to represent this flag and modify the core state machines to enforce this requirement. Signed-off-by: Mike Isely <isely@pobox.com>
2008-04-02s5h1409: fix blown-away bit in function s5h1409_set_gpioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Preserve all other bits when setting gpio. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-02au8522: replace __FUNCTION__ with __func__Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-02au8522: codingstyle cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fixed some checkpatch.pl warnings Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-18au0828: replace __FUNCTION__ with __func__Mauro Carvalho Chehab
From: Michael Krufky <mkrufky@linuxtv.org> replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-02Kconfig: VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-18au0828: CleanupMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-02videobuf-dma-sg.c: Avoid NULL dereference and add comment about backwards ↵Brandon Philips
compatibility Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/videobuf-dma-sg.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
2008-04-02videobuf: Avoid deadlock with QBUF and bring up to spec for empty queueBrandon Philips
Add a waitqueue to wait on when there are no buffers in the buffer queue. DQBUF waits on this queue without holding vb_lock to allow a QBUF to happen. Once a buffer has been queued we recheck that the queue is still streaming and wait on the new buffer's waitqueue while holding the vb_lock. The driver should come along in a timely manner and put the buffer into its next state finishing the DQBUF. By implementing this waitqueue it also brings the videobuf DQBUF up to spec and it now blocks on O_NONBLOCK even when no buffers have been queued via QBUF: "By default VIDIOC_DQBUF blocks when no buffer is in the outgoing queue." - V4L2 spec CC: Trent Piepho <xyzzy@speakeasy.org> CC: Carl Karsten <carl@personnelware.com> CC: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/videobuf-core.c | 96 +++++++++++++++++++++++------- linux/include/media/videobuf-core.h | 2 2 files changed, 78 insertions(+), 20 deletions(-)
2008-04-02vivi: Simplify the vivi driver and avoid deadlocksBrandon Philips
vivi previously had a very complex queuing system and held spinlocks while doing copy_to_user, kmalloc, etc. This caused the driver to easily deadlock when a multi-threaded application used it and revealed bugs in videobuf too. This replaces the copy_to_user with memcpy since we were never copying to user space addresses. And makes the kmalloc atomic. Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/vivi.c | 317 +++++++++------------------------------ 1 file changed, 81 insertions(+), 236 deletions(-)
2008-04-02vivi: make vivi openable only onceBrandon Philips
vivi currently doesn't have the infrastructure to handle being opened more than one time and will crash if it is. So, make it openable only once. Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/vivi.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
2008-04-02videobuf-vmalloc.c: Fix hack of postponing mmap on remap failureBrandon Philips
In videobuf-vmalloc.c remap_vmalloc_range is failing when applications are trying to mmap buffers immediately after reqbuf. It fails because the vmalloc area isn't setup until the first QBUF when drivers call iolock. This patch introduces mmap_setup to the qtype_ops and it is called in __videobuf_mmap_setup if the buffer type is mmap. In the case of vmalloc buffers this calls iolock, and sets the state to idle. I don't think this is needed for dma-sg buffers and it defaults to a no-op for everything but vmalloc. Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/videobuf-core.c | 29 +++++++----------- linux/drivers/media/video/videobuf-vmalloc.c | 43 +++++++++++++-------------- linux/include/media/videobuf-core.h | 3 + 3 files changed, 35 insertions(+), 40 deletions(-)
2008-04-02videobuf-vmalloc.c: Remove buf_release from videobuf_vm_closeBrandon Philips
Remove the buf_release on vm_close because it will lead to a buffer being released multiple times since all buffers are already freed under the two possible cases: device close or STREAMOFF. Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/videobuf-vmalloc.c | 2 -- 1 file changed, 2 deletions(-)
2008-04-02videobuf: Simplify videobuf_waiton logic and possibly avoid missed wakeupBrandon Philips
Possible missed wakeup- use kernel helpers for wait queues http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg27983.html Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/videobuf-core.c | 37 ++++++++++++------------------ 1 file changed, 15 insertions(+), 22 deletions(-)
2008-04-02videobuf: Wakeup queues after changing the state to ERRORBrandon Philips
The waitqueues must be woken up every time state changes. Signed-off-by: Brandon Philips <bphilips@suse.de> --- linux/drivers/media/video/videobuf-core.c | 1 + 1 file changed, 1 insertion(+)
2008-04-01Avoid an oops if the board is not fully defined.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Avoid an oops if the board is not fully defined. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-03-31 radio-cadet: wrap PNP probe code in #ifdef CONFIG_PNPMauro Carvalho Chehab
From: Bjorn Helgaas <bjorn.helgaas@hp.com> Wrap PNP probe code in #ifdef CONFIG_PNP. Without this change, we'll have unresolved references to pnp_get_resource() function when CONFIG_PNP=n. (This is a new interface that's not in mainline yet.) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-31 2-int-device.c: add MODULE_LICENSEMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> Now that it's in an own module it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01merge: http://linuxtv.org/hg/~mkrufky/tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-30 make sn9c102_i2c_try_write() staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch makes the needlessly global sn9c102_i2c_try_write() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> CC: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-30 proper prototype for zoran_device.c:zr36016_write()Mauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch adds a proper prototype for zr36016_write() in drivers/media/video/zoran_card.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01Fix a small bug introduced on a previous changeset.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01merge: http://linuxtv.org/hg/~pb/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-30pvrusb2-dvb: Fix stuck thread on streaming abortMike Isely
From: Mike Isely <isely@pobox.com> If the device fails to stream, the feed thread will block forever waiting for buffers. But while in this state it was not looking for an exit condition from the driver DVB interface. This caused the thread to jam. Implement a new stop flag (which will be set appropriately) to tell the thread to stop. Signed-off-by: Mike Isely <isely@pobox.com>
2008-03-30tda18271: fix standard map debugMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Show IF level and rf agc top settings in standard map dumps. Dump standard map during attach if DBG_MAP or DBG_ADV is set. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-30tuner-simple: fix broken build dependencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> tuner-simple is the only module that uses tuner-types - these will be merged to a single module in the future. For now, build both of them if TUNER_SIMPLE is selected. This fixes the following build warning, if tuner-simple is selected without tuner-types: WARNING: "tuner_count" [tuner-simple.ko] undefined! WARNING: "tuners" [tuner-simple.ko] undefined! Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-29New USB ID for Leadtek DVB-T USBPatrick Boettcher
From: Darryl Green <darryl.green@aanet.com.au> Detect Leadtek Winfast USB DTV Dongle with ID of 0x6f01 Signed-off-by: Darryl Green <darryl.green@aanet.com.au> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Added support for Terratec Cinergy T USB XXSPatrick Boettcher
From: Alexander Simon <alexander.simon@informatik.tu-muenchen.de> Alexander Simon found out that the Terratec Cinergy T USB XXS is just a clone of another DiB7070P-based device. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29[PATCH] support key repeat with dib0700 ir receiverPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This patch enables support for repeating last event when a key is holded down with dib0700 devices. It works with rc5 and nec remotes. It also fixes an annoying bug that floods kernel log with "Unknown key" messages after each keypress. This happened because the driver was not resetting infrared register after each poll so it kept polling last key even if nothing was being pressed. Fixing this, (calling rc_setup after each poll), permits to implement key repeat. Signed-off-by: Filippo Argiolas <filippo.argiolas at gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29PATCH for various Dibcom based devicesPatrick Boettcher
From: Albert Comerma <albert.comerma@gmail.com> This patch introduces support for dvb-t for the following DiBcom based cards: - Terratec Cinergy HT USB XE (USB-ID: 0ccd:0058) - Terratec Cinergy HT Express (USB-ID: 0ccd:0060) - Pinnacle 320CX (USB-ID: 2304:022e) - Pinnacle PCTV72e (USB-ID: 2304:0236) - Pinnacle PCTV73e (USB-ID: 2304:0237) - Yuan EC372S (USB-ID: 1164:1edc) Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Felix Apitzsch <F.Apitzsch@soz.uni-frankfurt.de> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29[PATCH] reworked patch to support TT connect S-2400Patrick Boettcher
From: Andre Weidemann <Andre.Weidemann@web.de> Added support for Technotrend connect S-2400. Signed-off-by: Andre Weidemann <Andre.Weidemann@web.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29SkyStar2: preparing support for the rev2.8Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29CX24123: preparing support for CX24113 tunerPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> To support a new device based on CX24123 (using the CX24113-tuner) the following was done: - added two parameters to de-select the internal PLL-driver (for CX24108) and a AGC-function callback. - added a virtual i2c-adapter which allow simple access behind the i2c-gate - cleanup up some code Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Preparation for supporting new devices, cleanup and sanenessPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Remove obsolete STV0297 module for CableStar2Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> The support for the CableStar2 has been merge to the main stv0297-module - so this is obsolete. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29HVR950Q Hauppauge eeprom support.Steven Toth
From: Steven Toth <stoth@hauppauge.com> HVR950Q Hauppauge eeprom support. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-18Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USBMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-18em28xx: adds proper demod IF for HVR-900Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Aidan Thornton <makosoft@googlemail.com> for helping to test this firmware Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-18em28xx: make some symbols staticMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17Removes a manual mode setupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The setup is already done at open(). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17em28xx-dvb: Properly selects digital mode at the right placeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The driver should be switched to digital mode, when tring to access the frontend or when streaming. This patch provides the correct code to support this feature. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17em28xx: Provide the proper support for switching between analog/digitalMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Before this patch, HVR900/HVR950 were incorreclty going back to analog. The result is that only digital were working. This patch provides the proper setup for analog/digital and tuner callback. It also properly resets analog into a sane state at open(). Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org> for helping to set the proper parameters to GPO/GPIO em2883 ports. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17em28xx-core: fix some debug printk's that wrongly received KERN_INFO.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Those printk's were adding more info to a line that were already being printed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17em28xx: rename registersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Now, all registers will follow the same convension: EM28XX_R<reg_number>_<reg_name> This allows to associate a register with its value, and also with a canonical name. Also, registers that are specific to a given chip were renamed accordingly, as EM2800_foo (for 2800 only registers) or EM2880_foo (for registers that started to appear on em2880). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17em28xx-cards: use register names for GPIO/GPOMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Before this patch, registers 0x04 and 0x08 were referenced by its value. This is bad, since makes harder for someone to understand what this is doing. This patch renames those two registers into an appropriate name. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 03:11:54 +0000