summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2008-10-21Remove unused inode parameter from video_ioctl2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> inode is never used on video_ioctl2. Remove it and rename the function to __video_ioctl2. This allows its usage directly as a callback at fops.unlocked_ioctl. Since we still need a callback with inode to be used with fops.ioctl, this patch adds video_ioctl2() that is just a call to __video_ioctl2(). Also, this patch adds some comments about video_ioctl2 and __video_ioctl2 usage at v4l2-ioctl.h. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21cx88: always de-alloc frontends on fault conditiondarron@kewl.org
From: Darron Broad <darron@kewl.org> De-alloc frontends on fault condition. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org>
2008-10-21videobuf: split unregister bus creating self-contained frontend de-allocatordarron@kewl.org
From: Darron Broad <darron@kewl.org> This creates a self contained frontend de-allocator for the instances where an adapter has not been registered yet frontend de-allocation may be required. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org>
2008-10-21Get rid of inode parameter at v4l_compat_translate_ioctl()Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> The inode parameter at v4l_compat_translate_ioctl() were just passed over several places just to keep compatible with fops.ioctl. However, it weren't used anywere. This patch gets hid of this unused parameter. Priority: normal CC: Laurent Pinchart <laurent.pinchart@skynet.be> CC: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21cx88: dvb_remove debug outputdarron@kewl.org
From: Darron Broad <darron@kewl.org> Add debug output for dvb_remove enter. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org>
2008-10-21cx88: Not all boards that requires cx88-mpeg has frontendsdarron@kewl.org
From: Mauro Carvalho Chehab <mchehab@infradead.org> The multifrontend changes on cx88 assumed that all boards that use cx88-mpeg supports DVB. This is not true. There also a few analog-only boards based on Blackboard design that also uses cx88-mpeg. For those boards, there's no need to allocate dvb frontends. This patch fixes videobuf allocation for those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-10-21cx88: initial fix for analogue only compilationdarron@kewl.org
From: Darron Broad <darron@kewl.org> Initial fix for when analogue only is selected for compilation (ie, !CX88_DVB) Priority: normal Signed-off-by: Darron Broad <darron@kewl.org>
2008-10-19ivtvfb: FB_BLANK_POWERDOWN turns off video outputHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> When using FBIOBLANK, FB_BLANK_POWERDOWN will now switch off the video output. Since some televisions turn themselves off after a while with no signal, this is the closest we can get to power-saving. Priority: normal Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-10-19v4l: use video_device.num instead of minor in video%dHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now independent of the minor number. So instead of using the minor field of the video_device struct one has to use the num field: this always contains the kernel number of the device node. I forgot about this when I did the v4l2 core change, so this patch converts all drivers that use it in one go. Luckily the change is trivial. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: michael@mihu.de CC: mchehab@infradead.org CC: corbet@lwn.net CC: luca.risolia@studio.unibo.it CC: isely@pobox.com CC: pe1rxq@amsat.org CC: royale@zerezo.com CC: mkrufky@linuxtv.org CC: stoth@linuxtv.org
2008-10-18ivtv: avoid green flashing when loading ivtvHans Verkuil
From: Martin Dauskardt <martin.dauskardt@gmx.de> When loading ivtv the TV-out of the PVR-350 will flash green since the saa712x is activated before the MPEG decoder has been initialized. Deactivate the saa712x until the MPEG decoder has been initialized. Priority: normal Signed-off-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-10-18ivtv: switch to unlocked_ioctl.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-10-18v4l2: add video_ioctl2_unlocked for unlocked_ioctl support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Based on an older patch from Sakari Ailus. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: Sakari Ailus <sakari.ailus@nokia.com>
2008-10-18v4l2-int-if: Export more interfaces to modulesHans Verkuil
From: Sakari Ailus <sakari.ailus@nokia.com> Export v4l2_int_device_try_attach_all. This allows initiating the initialisation of int if device after the drivers have been registered. Also allow drivers to call ioctls if v4l2-int-if was compiled as module. Priority: normal Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-10-21merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21merge: http://linuxtv.org/hg/~dougsland/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-20s5h1411: Power down s5h1411 when not in useSteven Toth
From: Devin Heitmueller <devin.heitmueller@gmail.com> Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this brings idle power from 123ma down to 84ma). Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20s5h1411: Skip reconfiguring demod modulation if already at the desired ↵Steven Toth
modulation From: Devin Heitmueller <devin.heitmueller@gmail.com> If we are already at the desired modulation, there is no need to reconfigure the demod (at a tuning time cost) Note that this change revealed that although the datasheet says the demod starts out in VSB-8 mode, the first tuning was failing consistently unless we went through the work of setting the registers. So add a field to denote this case so we always do the enable_frontend call, even if the first tuning request is for VSB-8. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20s5h1411: Perform s5h1411 soft reset after tuningSteven Toth
From: Devin Heitmueller <devin.heitmueller@gmail.com> If you instruct the tuner to change frequencies, it can take up to 2500ms to get a demod lock. By performing a soft reset after the tuning call (which is consistent with how the Pinnacle 801e Windows driver behaves), you get a demod lock inside of 300ms Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20dsbr100: Add frequency checkDouglas Schilling Landgraf
From: Alexey Klimov <klimov.linux@gmail.com> Add checking for frequency and printk if -1 returned. Priority: normal Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
2008-10-20radio-mr800: Add BKL for usb_amradio_open()Douglas Schilling Landgraf
From: Alexey Klimov <klimov.linux@gmail.com> Added BKL for usb_amradio_open() Priority: high Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
2008-10-20dsbr100: CodingStyle issueDouglas Schilling Landgraf
From: Alexey Klimov <klimov.linux@gmail.com> Fixed few coding style issues in dsbr100 Priority: normal Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
2008-10-20dsbr100: Correct bus_info stringDouglas Schilling Landgraf
From: Alexey Klimov <klimov.linux@gmail.com> Replaced bus_info string from ISA to USB Priority: normal Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
2008-10-19pvrusb2: Keep MPEG PTSs from drifting awayMike Isely
From: Boris Dores <babal@via.ecp.fr> (Mike Isely) This change was empirically figured out by Boris Dores after empirically comparing against behavior in the Windows driver. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2008-10-19pvrusb2: Fix deadlock problemMike Isely
From: Mike Isely <isely@pobox.com> Fix deadlock problem in 2.6.27 caused by new USB core behavior in response to a USB device reset request. With older kernels, the USB device reset was "in line"; the reset simply took place and the driver retained its association with the hardware. However now this reset triggers a disconnect, and worse still the disconnect callback happens in the context of the caller who asked for the device reset. This results in an attempt by the pvrusb2 driver to recursively take a mutex it already has, which deadlocks the driver's worker thread. (Even if the disconnect callback were to happen on a different thread we'd still have problems however - because while the driver should survive and correctly disconnect / reconnect, it will then trigger another device reset during the repeated initialization, which will then cause another disconect, etc, forever.) The fix here is simply to not attempt the device reset (it was of marginal value anyway). Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2008-10-18s5h1411: Add the #define for an existing supporting I/FSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Add the #define for an existing supporting I/F Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-18cx18: Don't mask many real init error codes by mapping them to ENOMEMAndy Walls
From: Andy Walls <awalls@radix.net> Changes to let error return codes bubble up to the user visible error message on card initialization. A number of them were being remapped to ENOMEM when no memory or array resource shortage existed. That hampered diagnosis of user trouble reports. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-10-18cx18: Add __iomem address space qualifier to cx18_log_*_retries() argumentAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Add __iomem address space qualifier to cx18_log_*_retries() addr argument to clean up sparse build warnings. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-10-18cx18: Fix memory leak on card initialization failureAndy Walls
From: Andy Walls <awalls@radix.net> On error exit, the cx18_probe() function did not use the proper entry in cx18_cards[] with kfree() when card init failed; leaking memory. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-10-16s5h1411: Remove meaningless codeSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Remove meaningless code Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: bugfix: Setting serial or parallel mode could destroy bitsSteven Toth
From: Steven Toth <stoth@linuxtv.org> Adding a serialmode function to read/and/or/write the register for safety. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: read_status() locking detection fixes.Steven Toth
From: Steven Toth <stoth@linuxtv.org> This includes new bit definitions for previously unknown bits. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: I/F related bugfix for 3.25 and remove spurious defineSteven Toth
From: Steven Toth <stoth@linuxtv.org> This should improve performance. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: Improvements to the default registersSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Improvements to the default registers Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-07-21sms1xxx: dvb/siano/: cleanupsMichael Krufky
From: Adrian Bunk <bunk@kernel.org> This patch contains the following cleanups: - mark smscore_module_init() as __init - mark smscore_module_exit as __exit - make the following needlessly global code static: - smscoreapi.c: struct g_smscore_notifyees - smscoreapi.c: struct g_smscore_devices - smscoreapi.c: struct g_smscore_deviceslock - smscoreapi.c: struct g_smscore_registry - smscoreapi.c: struct g_smscore_registrylock - smscoreapi.c: smscore_module_init() - smscoreapi.c: smscore_module_exit() - smsdvb.c: struct g_smsdvb_clients - smsdvb.c: struct g_smsdvb_clientslock Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-07-21replace __FUNCTION__ with __func__Mauro Carvalho Chehab
From: Alexander Beregalov <a.beregalov@gmail.com> v4l/drx397xD: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-21replace __FUNCTION__ with __func__Mauro Carvalho Chehab
From: Alexander Beregalov <a.beregalov@gmail.com> v4l: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-21merge: v4l-dvbJean-Francois Moine
2008-07-21Remove obsolete owner field from video_device struct.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> According to an old comment this should have been removed in 2.6.15. Better late than never... Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-21gspca: Lack of matrix for zc3xx - tas5130c (vf0250).Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-07-21videodev: move all ioctl callbacks to a new v4l2_ioctl_ops structHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> All ioctl callbacks are now stored in a new v4l2_ioctl_ops struct. Drivers fill in a const struct v4l2_ioctl_ops and video_device just contains a const pointer to it. This ensures a clean separation between the const ops struct and the non-const video_device struct. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-26merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-audiochipMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26merge: http://linuxtv.org/hg/~hgoede/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-25pvrusb2: Cosmetic macro fix (benign)Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2008-07-25pvrusb2: Enable IR chip on HVR-1900 class devicesMike Isely
From: Mike Isely <isely@pobox.com> The Zilog IR chip on HVR-1900 devices is held in reset when the device initializes. We have to bring this chip out of reset before LIRC has any chance of operating the chip. So do it. Signed-off-by: Mike Isely <isely@pobox.com>
2008-07-25cx18: Lock the aux PLL to the video pixle rate for analog capturesAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Lock the aux PLL to the video pixel rate for analog captures. The datasheet for the CX25840 says this is important for MPEG encoding applications. To ensure the PLL locking was correct, also fixed the aux PLL's multiplier to be computed based on a precise crystal freq of 4.5 MHz/286 * 455/2 * 8 = 28636363.6363... instead of the imporperly rounded 28636363. Signed-off-by: Andy Walls <awalls@radix.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-22 13:37:47 +0000