summaryrefslogtreecommitdiff
path: root/linux/include/media
AgeCommit message (Collapse)Author
2009-03-14v4l2-device: add v4l2_device_disconnectMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Call v4l2_device_disconnect when the parent of a hotpluggable device disconnects. This ensures that you do not have a pointer to a device that is no longer present. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notifyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13soc-camera: remove now unused gpio member of struct soc_camera_linkGuennadi Liakhovetski
From: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- arch/arm/mach-pxa/pcm990-baseboard.c | 1 - include/media/soc_camera.h | 2 -- 2 files changed, 0 insertions(+), 3 deletions(-)
2009-03-13soc-camera: add board hook to specify the buswidth for camera sensorsGuennadi Liakhovetski
From: Sascha Hauer <s.hauer@pengutronix.de> Camera sensors have a native bus width say support, but on some boards not all sensor data lines are connected to the image interface and thus support a different bus width than the sensors native one. Some boards even have a bus driver which dynamically switches between different bus widths with a GPIO. This patch adds a hook which board code can use to support different bus widths. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- include/media/soc_camera.h | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
2009-03-13soc-camera: configure drivers with a default format at probe timeGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Currently soc-camera doesn't set up any image format without an explicit S_FMT. According to the API this should be supported, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch moves negotiating of available host-camera format translations to probe() time, and restores the state from the last close() on the next open(). This is needed for some drivers, which power down or reset hardware after the last user closes the interface. This patch also has a nice side-effect of avoiding multiple allocation anf freeing of format translation tables. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 39 ++++++++++++++++++++++--------------- include/media/soc_camera.h | 1 + 2 files changed, 24 insertions(+), 16 deletions(-)
2009-03-13soc-camera: separate S_FMT and S_CROP operationsGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> As host and camera drivers become more complex, differences between S_FMT and S_CROP functionality grow, this patch separates them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m001.c | 19 +++- drivers/media/video/mt9m111.c | 56 +++++++--- drivers/media/video/mt9t031.c | 84 ++++++++++------ drivers/media/video/mt9v022.c | 62 +++++++---- drivers/media/video/mx3_camera.c | 157 +++++++++++++++++----------- drivers/media/video/ov772x.c | 31 +++++- drivers/media/video/pxa_camera.c | 67 +++++++++--- drivers/media/video/sh_mobile_ceu_camera.c | 17 ++- drivers/media/video/soc_camera.c | 20 ++-- drivers/media/video/soc_camera_platform.c | 9 ++- drivers/media/video/tw9910.c | 45 +++++--- include/media/soc_camera.h | 6 +- 12 files changed, 381 insertions(+), 192 deletions(-)
2009-03-08zoran/bt819: use new notify functionality.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Bt819 needs the parent driver to drive a GPIO pin low and high in order to reset its fifo. Use the new notify callback for this. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-08v4l2-device: add a notify callback.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add a notify callback to v4l2_device to let sub-devices notify their parent of special events. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-07ir-kbd-i2c: Prevent general protection fault on rmmodMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> The removal of the timer which polls the infrared input is racy. Replacing the timer with a delayed work solves the problem. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-11Revert the last changeset, since there are a rev 2 of those changesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-05Fix race in infrared polling on rmmodMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> The race on rmmod I just fixed in cx88-input affects 3 other drivers. Fix these the same way. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10videobuf-core: also needs a minimal subset of V4L1 headerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10avoid loading the entire videodev.h header for drivers that are already V4L2 ↵Mauro Carvalho Chehab
only From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03v4l2: New function v4l2_video_std_frame_periodTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Some code was calling v4l2_video_std_construct() when all it cared about was the frame period. So make a function that just returns that and have v4l2_video_std_construct() use it. At this point there are no users of v4l2_video_std_construct() left outside of v4l2-ioctl, so it could be un-exported and made static. Change v4l2_video_std_construct() so that it doesn't zero out the struct v4l2_standard passed in. It's already been zeroed out in the common ioctl code. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-02-26merge: http://linuxtv.org/hg/~awalls/cx18Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26merge: http://mercurial.intuxication.org/hg/v4l-dvb-commitsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-zoranMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-fill-stdMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-usbvisionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26dm1105: infrared remote code is remaked.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> The driver infrared remote code part is altered to switch to a work queue. Also ir_codes table moved to ir-common module for shared access. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-02-23soc-camera: extend soc_camera_bus_param_compatible with more testsGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Add data signal polarity, mode, and bus-width tests to soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- include/media/soc_camera.h | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-)
2009-02-23sh_mobile_ceu: SOCAM flags are not platform dependentGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> sh_mobile_ceu_camera.c support for signal polarity flags isn't platform dependent, provide them locally. Only the bus width is implementation specific. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/sh_mobile_ceu_camera.c | 28 ++++++++++++++++++++++++++-- include/media/sh_mobile_ceu.h | 5 +++-- 2 files changed, 29 insertions(+), 4 deletions(-)
2009-02-23ov772x: Add image flip supportGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> o ov772x_camera_info :: flags supports default image flip. o V4L2_CID_VFLIP/HFLIP supports image flip for user side. Thank Magnus for advice. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov772x.c | 88 ++++++++++++++++++++++++++++++++++++++++-- include/media/ov772x.h | 5 ++ 2 files changed, 89 insertions(+), 4 deletions(-)
2009-02-21v4l2-common: remove v4l2_ctrl_query_fill_stdHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The v4l2_ctrl_query_fill_std() function wasn't one the best idea I ever had. It doesn't add anything valuable that cannot be expressed equally well with v4l2_ctrl_query_fill and only adds overhead. Replace it with v4l2_ctrl_query_fill() everywhere it is used and remove it from v4l2_common.c. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-21v4l2-common: add v4l2_i2c_subdev_addr()Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add small function to retrieve the i2c address from a v4l2_subdev pointer. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19adv7170: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19vpx3220: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19saa7185: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19saa7110: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19ks0127: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19bt856: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19bt819: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-19bt866: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-17merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17backport include changes on some .h filesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-16cx18, v4l2-chip-ident: Finish conversion of AV decoder core to v4l2_subdevAndy Walls
From: Andy Walls <awalls@radix.net> Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast decoder core internal to the CX23418. Completed separation and encapsulation of the A/V decoder core interface as a v4l2_subdevice. The cx18 driver now compiles and links again. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-14v4l2-subdev: rename dev field to v4l2_devHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remain consistent in the naming: fields pointing to v4l2_device should be called v4l2_dev. There are too many device-like entities without adding to the confusion by mixing naming conventions. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-14v4l2-device: allow a NULL parent device when registering.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Some drivers (e.g. for ISA devices) have no parent device because there is no associated bus driver. Allow the parent device to be NULL in those cases when registering v4l2_device. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-13saa7191: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-13indycam: convert to v4l2_subdevHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-13merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-rdsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-13merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-13v4l2-common: add comments warning that about the sort orderHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Control arrays as are used with v4l2_ctrl_next must be sorted from low to high. Add a comment at the top of all such arrays to warn about this. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-13merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-rdsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-13v4l2-subdev: add querystd and g_input_statusHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> In order to convert the v4l1 zoran and vino i2c drivers to v4l2 these extra ops are required. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-11saa6588: add g_chip_ident support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-11Adds IR table for the IR provided with this board and includes it atMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Kaiomy entry. Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-07saa7146: convert saa7146 and mxb in particular to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Modified mxb to load the i2c modules through v4l2_subdev. So no more probing. Modified tea6415c and tea6420 to use the standard routing ops to do the routing, rather than using private commands. Dropped the private commands from tda9840 (they were never used except during initialization of the module). Added saa7146 support for VIDIOC_DBG_G_CHIP_IDENT. Converted saa5246a and saa5249 to v4l2_subdev. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-07saa7146: i2c adapdata now points to v4l2_device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Prepare for converting to v4l2_subdev. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 19:46:05 +0000