summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2008-12-19cx24113: fix compile warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-19bt832: remove this driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The bt832 i2c driver was never used or even compiled and is no longer maintained. It is now removed completely. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-19tuner: fix tuner_ioctl compile error if V4L1 ioctls are disabled.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-18merge: http://www.linuxtv.org/hg/~dheitmueller/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx88: advise/acquire clean-up for HVR-1300/3000/4000Mauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> This cleans-up the advise/acquire methods. This has been tested on the hvr-1300/4000 and assumed to be correct on the hvr-3000. This update also fixes analogue tuning on the hvr-1300 when in blackbird mode. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: change to ALGO_HWMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Slow tuning, EG: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Appears to be resolved by dropping zig-zag tuning and relying on hardware only: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Tuning to a weaker channel shows that the hardware recovers sync: status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Also, tuning, moving the dish and then restoring the dish also retunes. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18dvb-core: don't add an event when in ONE SHOT mode for algo type HWMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> It has been noticed that in HW tuning mode in cx24123.c that a check is made to not alter the status var when in one shot mode, a simpler solution is to not update here for all cards. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: fix retune regression introduced in 70ee86a7c630Mauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Thanks to AKPM for spotting this. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: bugfix: add missing delsys in FEC lookupMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Delsys was missing when searching for FEC in table. This fixes FEC lookup for DVB-S2 QPSK modulation. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18tuner-xc2028: allow printing stack trace as debug on sleep codeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> tuner-xc3028 can be put to sleep to save power. However, if not properly recovered from sleep, the device won't work. It is noticed that some devices doesn't recover properly, so let's add a dump_stack() as a debug option, to allow us to track when this happens. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-17xc5000: remove init_fw optionDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The init_fw option was broken for the HVR-950q because we would call the reset callback inside of dvb_attach() and the callback had not been setup yet. Michael Krufky (who added the init_fw feature) says it's no longer required, so just remove the option completely. Thanks to user Zzeiss from #linuxtv chat for reporting the issue and Michael Krufky <mkrufky@linuxtv.org> for proposing the fix. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org>
2008-12-16em28xx: don't assume every eb1a:2820 reference design is a Prolink PlayTV USB2Devin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Don't operate under the assumption that every device that uses the em2820 default USB ID is a Prolink PlayTV USB. We have an eeprom hash, so use that, since otherwise we cannot support other devices with the 2820 default USB ID (such as the ADS Tech Instant TV USB USBAV-704) Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-16em28xx: add chip id for em2874Devin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add the em2870 to the list of known em28xx chip ids. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-16em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET commandDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Fix a NULL pointer dereference that would occur if the video decoder tied to the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver) Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-16em28xx: fix/improve em28xx locking schemaMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Changes/fixes on em28xx dev->lock: - em28xx_init_dev() were unlocking without a previous lock; - some read ioctls need to lock after the removal of KBL, since a write may be happening at the same time an ioctl is reading; - keep the device locked during all device initialization; - lock/unlock while reading/writing registers. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-16em28xx: vidioc_try_fmt_vid_cap() doesn't need any lockMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> vidioc_try_fmt_vid_cap() just checks if a given resolution is supported. It doesn't touch on struct em28xx device descriptor. so, there's no need to lock. While there, use unlikely() for those values that aren't likely to occur. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-16em28xx: move res_get locks to the caller routinesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-16em28xx: move dev->lock from res_free to the caller routinesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-16Revert changeset 9886Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Changeset 9886 were applied by mistake, reverting changeset 9885, that got a wrong comment. Let's revert it. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-16merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-16v4l2-compat: test for unlocked_ioctl as well.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The v4l_compat_ioctl32() function only tested for the presence of the ioctl op, not for unlocked_ioctl. So it would always return an error when used with drivers that use unlocked_ioctl instead of ioctl. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-16uvcvideo: V4L2 zoom controls supportLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Add support for absolute and continuous zoom controls (mapped to absolute and relative UVC zoom controls). Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2008-12-16uvcvideo: V4L2 privacy control supportLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2008-12-15v4l2-compat32: add missing newline after kernel messageHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-15v4l: fix compile warning.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix (bogus) compile warning about uninitialized variable. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-15merge: http://linuxtv.org/hg/~pinchartl/uvcvideo/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-15merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-14cx18: Refine the firmware load and firmware startup processAndy Walls
From: Andy Walls <awalls@radix.net> Refine the firmware load and firmware startup process. Significant changes are to ensure the SCB and IPC area are correct before starting up the firmware, and letting the CPU firmware start up the APU firmware for us. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-14v4l2: Add missing control namesLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Update v4l2_ctrl_get_name() and v4l2_ctrl_get_menu() with missing control names and menu values. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2008-12-14v4l2: Add privacy controlLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> The privacy control prevents video from being acquired by the camera. A true value indicates that no image can be captured. Devices that implement the privacy control must support read access and may support write access. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2008-12-14v4l2: Add camera zoom controlsLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> The zoom controls move the zoom lens group to a an absolute position, as a relative displacement or at a given speed until reaching physical device limits. Positive values move the zoom lens group towards the telephoto direction, negative values towards the wide-angle direction. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2008-12-14CX24113: Fixed more typosPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14Patch: fix a typo in cx24113.cPatrick Boettcher
From: Uwe Bugla <uwe.bugla@gmx.de> This patch fixes a typo in cx24113.c. Priority: normal Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14Minor fixes for cx24113-driver (codingstyle)Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Fixed some minor coding style issues and some driver information printed when using the driver on a board. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14changeset: 9885:77f72ebfa794Mauro Carvalho Chehab
tag: tip user: Mauro Carvalho Chehab <mchehab@redhat.com> date: Sun Dec 14 09:16:55 2008 -0200 files: linux/drivers/media/dvb/b2c2/Kconfig linux/drivers/media/dvb/bt8xx/Kconfig linux/drivers/media/dvb/dvb-usb/Kconfig linux/drivers/media/dvb/ttpci/Kconfig linux/drivers/media/video/cx18/Kconfig linux/drivers/media/video/cx23885/Kconfig linux/drivers/media/video/cx88/Kconfig linux/drivers/media/video/pvrusb2/Kconfig linux/drivers/media/video/saa7134/Kconfig description: media Kconfigs: fix bugzilla #12204 From: Mauro Carvalho Chehab <mchehab@redhat.com> When the tuner modules were moved to common/tuners, a separate customize option were added for tuners. However, the automatic selection of the tuners were still using the older option. This causes that the automatic selection to fail, if DVB_FE_CUSTOMISE is selected. Also, since those tuners are now under MEDIA_TUNER_CUSTOMIZE menu, if you unset MEDIA_TUNER_CUSTOMIZE, you can't manually select the tuners. This patch fixes this error by replacing DVB_FE_CUSTOMISE by MEDIA_TUNER_CUSTOMIZE on all places were a tuner is selected. The patch were generated by this small script: for i in `find drivers/media -name Kconfig`; do cat $i|perl -ne 's/(MEDIA_TUNER.*)DVB_FE_CUSTOMISE/\1MEDIA_TUNER_CUSTOMIZE/; print $_' >a mv a $i done A manual reordering were done to have the media selects just after the dvb ones. Priority: high Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-14gspca - ov534: Fix a warning when compilation without GSPCA_DEBUG.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-14gspca - ov534: Show sensor ID.Jean-Francois Moine
From: Antonio Ospite <ospite@studenti.unina.it> The original version of sccb_read_reg() is from Jim Paris. NOTE: as it is now reading sensor ID won't work for sensors on different i2c slave address. Priority: normal Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-14gspca - ov534: Fix typo.Jean-Francois Moine
From: Antonio Ospite <ospite@studenti.unina.it> Priority: normal Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-14merge: v4l-dvbJean-Francois Moine
2008-12-14merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ngMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-14merge: http://www.linuxtv.org/hg/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-14merge: http://linuxtv.org/hg/~pb/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-13gspca - vc032x: Add V&H flips and sharpness controls for sensor po1200.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-12gspca - vc032x: Remove the unused quality/qindex.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-11gspca - vc032x: Fix frame overflow errors with vc0321.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> The vc0321 sends some additional data after sending the complete frame, we ignore this. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-10sync from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> sync from main Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-10[PATCH] short help for Technisat cards to select the right configurationPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This patch adds a short help for Technisat cards to help the user selecting the right configuration for his card(s). Priority: normal Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-10gspca - ov534: Add framerate support.Jean-Francois Moine
From: Jim Paris <jim@jtan.com> Add support for getting and setting framerate via v4l2 controls, rather than setting a fixed value at module insertion. Priority: normal Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-10gspca - main: Allow subdrivers to handle v4l2_streamparm requests.Jean-Francois Moine
From: Jim Paris <jim@jtan.com> Add get_streamparm and set_streamparm operations so subdrivers can get/set stream parameters such as framerate. Priority: normal Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-10gspca - main: Fix vidioc_s_jpegcomp locking.Jean-Francois Moine
From: Jim Paris <jim@jtan.com> Priority: high Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 09:51:48 +0000