summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2009-09-03gspca_mr97310a: Add one more vivitar mini cam to the list of CIF camshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: Add one more vivitar mini cam to the list of CIF cams Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-09-02gspca_mr97310a: Allow overriding of detected sensor typehans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: Allow overriding of detected sensor type Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-31Add new V4L2_FMT_FLAG_EMULATED flag to videodev2.hhans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> V4L2_FMT_FLAG_EMULATED 0x0002 This format is not native to the device but emulated through software (usually libv4l2), where possible try to use a native format instead for better performance. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-17gspca_mr97310a: Use correct register for CIF type 1 sensor gain settingshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: Use correct register for CIF type 1 sensor gain settings Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-14gspca_mr97310a: Add controls for CIF type 0 sensor camshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: Add controls for CIF type 0 sensor cams Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-14gspca_mr97310a: make the probing a bit less chattyhans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: make the probing a bit less chatty Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-14gspca_mr97310a: Move detection of CIF sensor type to probe() functionhans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: Move detection of CIF sensor type to probe() function, so that the right controls are set to disabled from the start, rather then having them disappear all of a sudden when the stream is started. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-14gspca_mr97310a: cleanup/fixup control handlinghans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_mr97310a: cleanup/fixup control handling Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-14gspca: mr97310a fix detection of sensortype for vivicam with id byte of 0x53hans@rhel5-devel.localdomain
From: Hans de Goede <hdgoede@redhat.com> gspca: mr97310a fix detection of sensortype for vivicam with id byte of 0x53 Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-08-14gspca: mr97310a add support for CIF and more VGA camera'shans@rhel5-devel.localdomain
From: Theodore Kilgore <kilgota@auburn.edu> This patch adds supports for mr97310a camera's with CIF sensors (2 different types) and for VGA mr97310a camera with a different sensor then supported until now. This patch also add support for controls for one of the 2 CIF sensors, this was written by Thomas Kaiser <thomas@kaiser-linux.li> Priority: normal Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Thomas Kaiser <thomas@kaiser-linux.li> Signed-off-by: Hans de Goede <hdgoede@redhat.com>
2009-07-29gspca_pac207: enable higher framerates / lower exposure settingshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> Now that we've figured out the higher compression settings (supported in libv4l-0.6.0 and later, so after this patch the driver should be used with libv4l-0.6.0 or higher only!), we can enable higher framerates. Which means lower exposure times, which is important for the use of the pac207 in full daylight. This patch also tweakes the brightness default and the per color gain balances to use the values which are adviced by Pixart in the pac207 application note. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-07-29gspca_pac207: remove a number of unneeded (repeated) register writeshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_pac207: remove a number of unneeded (repeated) register writes Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-07-29em28xx: fix audio VIDIOC_S_CTRL adjustments on devices without ac97Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Even devices without ac97 needs to call analog audio setup function, to properly set xclk and mute/unmute. Thanks to Angelo Cano <acano@fastmail.fm> for reporting and testing it. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-29em28xx: fix support for Plextor ConvertX PX-TV100UMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> This device uses msp34xx and uses 2.048 MHz frequency for I2S communication. Thanks to Angelo Cano <acano@fastmail.fm> for pointing the issues with this device and proposing an approach for fixing the issue. Priority: normal Tested-by: Angelo Cano <acano@fastmail.fm> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-19Stop defining I2C adapter IDs nobody usesMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> There is no point in defining I2C adapter IDs when no code is using them. As this field might go away in the future, stop using it when we don't need to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-27af9015: avoid magically sized temporary buffer in eeprom_dumpMauro Carvalho Chehab
From: Jan Nikitenko <jan.nikitenko@gmail.com> Replace printing to magically sized temporary buffer with use of KERN_CONT for continual printing of eeprom registers dump. Since deb_info is defined as dprintk, which is conditionally defined to printk without additional parameters, meaning that deb_info is equivalent to direct printk (without adding KERN_ facility), we can use KERN_DEBUG and KERN_CONT in there, eliminating the need for sprintf into temporary buffer with not easily readable/magical size. Though it's strange, that deb_info definition uses printk without KERN_ facility and callers don't use it either. Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-18zl10353 and qt1010: fix stack corruption bugMauro Carvalho Chehab
From: Jan Nikitenko <jan.nikitenko@gmail.com> Fixes stack corruption bug present in dump_regs function of zl10353 and qt1010 drivers: the buffer buf was one byte smaller than required - there are 4 chars for address prefix, 16 * 3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 were provided. The one byte missing in stack based buffer buf can cause stack corruption possibly leading to kernel oops, as discovered originally with af9015 driver (af9015: fix stack corruption bug). Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-27mtv9v011: Add a missing chip version to the driverMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some mt9v011 webcams report 0x8332 chip version, instead of 0x8243. From the revision history at the mt9v011 datasheet, it seems that the chip version has changed from the first release of the chip. Thanks-to hermann pitton <hermann-pitton@arcor.de> for pointing this to me, on his tests with a Silvercrest webcam. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-24merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-24merge: http://mercurial.intuxication.org/hg/v4l-dvb-commitsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-24merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-24merge: http://linuxtv.org/hg/~pinchartl/uvcvideo/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-23cx18: Read buffer overflowAndy Walls
From: Andy Walls <awalls@radix.net> This mistakenly tested against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Reported-by: Roel Kluin <roel.kluin@gmail.com> Priority: high Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-23ivtv: Read buffer overflowAndy Walls
From: Roel Kluin <roel.kluin@gmail.com> This mistakenly tests against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Priority: high Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-22ivtv: Fix improper GPIO audio mux input switch on video standard changeAndy Walls
From: Andy Walls <awalls@radix.net> Remove the subdev_s_std() method from the GPIO subdev. It appears it was used in the past to effect the switch back from radio mode to tuner mode, but it had a side effect that is improper and against the V4L2 spec, when you were not in radio mode. Whenever the video stanadrd was changed, the GPIO audio mux was set back to the tuner audio input, even if you were set to a Line In input. Thanks to Ravi A. for doing the troubleshooting to point me right to the problem. Reported-by: Ravi A <asvravi@gmail.com> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-22ivtv: Fix errors in AVerTV M113 card definitions and add a new M113 cardAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Tested-by: Ravi A. <asvravi@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-22tuner-simple: Add an entry for the Partsnic PTI-5NF05 NTSC tunerAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-22Create card parameters array in SDMC DM1105 driver.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Create card parameters array in SDMC DM1105 driver. It is useful for cards with the same pci id, but different tuners, lnb power control circuits, etc. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2009-07-22pxa_camera: Fix Oops in pxa_camera_probe.Guennadi Liakhovetski
From: Antonio Ospite <ospite@studenti.unina.it> mclk_get_divisor uses pcdev->soc_host.dev, make sure it is initialized. Priority: high Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/pxa_camera.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2009-07-22zr364xx: error message when buffer is too small and code cleanupAntoine Jacquet
From: Lamarque Vieira Souza <lamarque@gmail.com> . added code to print an error message when buffer is too small to hold frame data, that is better than just a hard crash. Tested using MAX_FRAME_SIZE = 50000, lots of error messages appeared in /var/log/messages but no crash. . removed line "f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;" in zr364xx_vidioc_try_fmt_vid_cap, it should not be there. . changes to improve performance (or at least not hurt it): removed some unneeded debug messages; added macro FULL_DEBUG to enable debug messages in performance critical places, this macro is disabled by default; removed "if (frm->lpvbits == NULL)..." in zr364xx_read_video_callback because after analisying the source code I concluded it will always results to false, so it is not needed. . some small code reorganization. Signed-off-by: Lamarque V. Souza <lamarque@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com>
2009-07-21backport commit 405f55712dfe464b3240d7816cc4fe4174831be2Mauro Carvalho Chehab
kernel-sync: Author: Alexey Dobriyan <adobriyan@gmail.com> Date: Sat Jul 11 22:08:37 2009 +0400 headers: smp_lock.h redux * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-21zr364xx: Need to include linux/version.hMauro Carvalho Chehab
drivers/media/video/zr364xx.c: In function ‘zr364xx_vidioc_querycap’: drivers/media/video/zr364xx.c:736: error: implicit declaration of function ‘KERNEL_VERSION’ kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-21flexcop: fix compile errorHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-07-20merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-rdsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-20merge: http://udev.netup.ru/hg/v4l-dvb-commitsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-20merge: http://www.kernellabs.com/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-20merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-bttvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-20merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-miscMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-20merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-20Implement changing resolution on the fly for zr364xx driverAntoine Jacquet
From: Lamarque Vieira Souza <lamarque@gmail.com> This patch implements changing resolution in zr364xx_vidioc_s_fmt_vid_cap for zr364xx driver. This version is synced with v4l-dvb as of 20/Jul/2009. Tested with Creative PC-CAM 880. OBS: I had to increase MAX_FRAME_SIZE to prevent a hard crash in my notebook (caps lock blinking) when testing with mplayer, which automatically sets resolution to the maximum (640x480). Maybe we should add code to auto-detect frame size to prevent this kind of crash in the future. Signed-off-by: Lamarque V. Souza <lamarque@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com>
2009-07-20cx23885: Modify hardware revision detection for newer siliconSteven Toth
From: Steven Toth <stoth@kernellabs.com> cx23885: Modify hardware revision detection for newer silicon Priority: normal Signed-off-by: Steven Toth <stoth@kernellabs.com>
2009-07-20cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850Steven Toth
From: Steven Toth <stoth@kernellabs.com> cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850 Priority: normal Signed-off-by: Steven Toth <stoth@kernellabs.com>
2009-07-20Add CAM presence checkout during CiMax init for NetUP card.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> CAM presence checkout is needed after power on PC. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-07-20mt312: fix build for kernels < 2.6.24Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add compat.h include to get the KERN_CONT define needed for older kernels. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-07-20bttv: fix regression: tvaudio must be loaded before tunerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Both tvaudio and the tuner share i2c address 0x42. The tvaudio module can check whether it really is a tda9840, but the tuner can't. So the tvaudio module must be loaded before the tuner module. This was also the case for 2.6.29, but the order was swapped in 2.6.30. Thanks to Krzysztof Grygiencz for reporting and testing this. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-07-20uvcvideo: Don't apply the FIX_BANDWIDTH quirk to all ViMicro devicesLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Commit 50144aeeb702ea105697ae5249f059ea3990b838 broke the Samsung NC10 netbook webcam. Instead of applying the FIX_BANDWIDTH quirk to all ViMicro devices, list the devices explicitly. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-07-19uvcvideo: Add PROBE_DEF quirk and enable it for the MT6227 deviceLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> At least one MT6227 model crashes when receiving a GET_DEF request on the video probe control. As the various models can't be told apart based on the descriptors, add a PROBE_DEF quirk to avoid sending the GET_DEF request and enable the quirk for all models. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-07-20stv6110 tuner: Read registers through one time i2c_transfer calling.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-07-20Bug fix: stv0900 i2c repeater configuration must be set to manual.Abylay Ospan
From: Abylay Ospan <aospan@netup.ru> In automatic mode every stop event on SDA line ends repetition. However, in NetUP Dual card on the same i2c bus we have several devices. If someone using both adapters to lock simultaneously or working with CAM interface during lock procedure, it lead to end repetition prematurely quite often. Set stv0900 i2c repeater to manual mode prevents such situation. Signed-off-by: Abylay Ospan <aospan@netup.ru>
2009-07-20Change clocking configuration and frequency for NetUP card.Abylay Ospan
From: Abylay Ospan <aospan@netup.ru> Signed-off-by: Abylay Ospan <aospan@netup.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 02:22:41 +0000