summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2008-11-29cs53l32a: convert to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-24em28xx: fix compile warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Label fail_unreg is no longer used. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-25em28xx: Properly handles XCLK and I2C speedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> The previous patches removed XCLK and I2C magic. Now, we finally know what those registers do. Also, only a very few cards need different setups for those. Instead of keeping the setups for those values inside the per-device hack magic switch, move the uncommon values to the board-specific struct, and have a common setup for all other boards. So, almost 100 lines of hacking magic were removed. A co-lateral effect of this patch is that it also fixes a bug at em28xx-core, where xclk were set, without taking any care about not overriding a previous xclk setup. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-25em28xx: Cleanup GPIO/GPO setup codeMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Cleanup the calls to set the GPIOs and GPOs for various devices, replacing the register number with the #define from em28xx-reg.h and converting over to using em28xx_write_reg() Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-25em28xx: cleanup XCLK register usageMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Convert over to setting the XCLK register usage with the new em28xx_write_reg() function. Thanks to Ray Lu from Empia for providing the em2860/2880 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-24em28xx: fix oops audioDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@linuxtv.org> Replaced usb_kill_usb for usb_unlink_usb (wait until urb to fully stop require USB core to put the calling process to sleep). Oops: http://www.kerneloops.org/raw.php?rawid=71799&msgid= Priority: high Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
2008-11-24em28xx-alsa: implement another locking schemaMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of using a spinlock, it is better to call the proper pcm stream locking schema. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-24merge http://linuxtv.org/hg/~mkrufky/windhamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-24merge: http://linuxtv.org/hg/~awalls/cx18-bugfixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-24gspca: Use msleep instead of mdelay.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-24gspca: Simplify the pkt_scan of stk014.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-23cx18: Use a known open task handle when setting stream CX2341x parametersAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Use a known open task handle when setting stream CX2341x parameters Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream. Let's make sure we use a valid task handle to perform the CX2341x control settings. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-14cx18: Convert some list manipulations to emphasize entries not listsAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-14cx18: VBI comment corrections and comments about VBI issuesAndy Walls
From: Andy Walls <awalls@radix.net> VBI comment corrections to avoid future confusion about standards. Comments on cx18 VBI implementation shortcomings that need resolution. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-12-14cx18 Replace magic number 63 with CX18_MAX_FW_MDLS_PER_STREAMAndy Walls
From: Andy Walls <awalls@radix.net> Removed magic number that referred to firmware limit on the number of MDLs the firmware can maintain for any stream at any one time. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-23cx18: Quiet a sometimes common warning that often has benign consequencesAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Quiet a sometimes common warning that often has benign consequences. No one probably cares that the firmware took forever to ack our command, as they always seem to succeed whether or not the firmware acks it in a reasonable amount of time. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-23Add support for the CX24113 DVB-S tuner driverPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This commit adds support for the CX24113 DVB-S tuner driver and thus support for the Technisat Skystar2 revision 2.8. The driver was created with the help of Technisat. Thank you very much. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-11-23merge: v4l-dvbJean-Francois Moine
2008-11-23gspca: Delay when trying an other altsetting on streaming start.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-23gspca: Simplify the brightness/contrast for ov76xx sensors in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-23Add Compro VideoMate E650F (DVB-T part only).Mauro Carvalho Chehab
From: Igor M. Liplianin <liplianin@me.by> Add Compro VideoMate E650F (DVB-T part only). The card based on cx23885 PCI-Express chip, xc3028 tuner and ce6353 demodulator. CC: Steven Toth <stoth@linuxtv.org> Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-23v4l2-common: add i2c helper functionsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add helper functions to load i2c sub-devices, integrating them into the v4l2-framework. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-30v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 framework.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Start implementing a proper v4l2 framework as discussed during the Linux Plumbers Conference 2008. Introduces v4l2_device (for device instances) and v4l2_subdev (representing sub-device instances). Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Andy Walls <awalls@radix.net> Reviewed-by: David Brownell <david-b@pacbell.net>
2008-11-22Remove warnings when compiling with kernel 2.6.18Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22sms1xxx: add USB suspend and hibernation supportMichael Krufky
From: Uri Shkolnik <uris@siano-ms.com> This patch provides USB suspend and hibernation support for Siano's SMS chipset based USB device Priority: normal Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: enable signal quality indicator LEDs on Hauppauge WinTV MiniStickMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: fix invalid unc readingsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add function smsdvb_read_ucblocks to report uncorrectable error counts. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: enable LNA control on Hauppauge WinTV MiniCardMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Power the LNA while the frontend is in use. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: enable power LED on Hauppauge WinTV MiniStickMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Enable power LED while the frontend is in use. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22em28xx: improve message probing logsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> On some em28xx devices, there's an unused interface. This is printed on the logs as an error. We can just ignore that interface. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22gspca: Fix an access to freed memory at disconnect time.Jean-Francois Moine
From: leandro Costantino <lcostantino@gmail.com> On disconnection (USB or rmmod subdriver), the device is freed by video_unregister_device(). Setting the 'present' and 'streaming' flags must be done before the call to this function. Priority: high Signed-off-by: leandro Costantino <lcostantino@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-22gspca: Add the ov534 webcams in the gspca documentation.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-22gspca:Subdriver ov534 added.Jean-Francois Moine
From: Antonio Ospite <ospite@studenti.unina.it> The OmniVision OV534 is the USB bridge chip used in Sony Playstation EYE, it is found also in other webcams like Hercules Blog Webcam and Hercules Dualpix HD. This driver is the port to gspca of a prototype driver by Mark Ferrell based on vivi. The original code to initialize the camera and start the capture is from Jim Paris on ps2dev.org, here integrated with the analysis of the USB communications taken by the windows driver. Priority: normal Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-22gspca: Let gspca handle the webcams 045e:00f5 & 00f7 instead of sn9c102.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-22gspca: Remove some unuseful core in main.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-22gspca: Fix typos and name errors in Kconfig.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-21cx18: Update version due to significant irq handling changesAndy Walls
From: Andy Walls <awalls@radix.net> Update the version number due to significant changes in the way the mailboxes and interrupts are handled. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-21cx18: Copyright attribution update for files modified by awallsAndy Walls
From: Andy Walls <awalls@radix.net> Add copyright attribution for files modified by awalls in 2008 Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-21cx18: Adjust outgoing mailbox timeouts and remove statistics loggingAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Adjust outgoing mailbox timeouts and remove statistics logging. This saves some wasted storage in struct cx18 for each card. Cutting the outgoing mailbox timeouts in half from the previous value appears to be safe with MythTV. Got rid of interrupted case code path after a wait uninterruptable returns. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-11-21gspca: Do the sn9c105 - ov7660 work again in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> The sn9c105 and sn9c120 bridges must be differently programmed for the ov7660. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-11-20af9015: fix compilation errorHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It is much more readable to swap the byteorder in the switch rather than in each case statement. In addition, this fixes a compile error when compiled for 2.6.16. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-21bttv: fix some entries on Phytec boards and add missing onesMauro Carvalho Chehab
From: Dirk Heer <D.Heer@phytec.de> This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Priority: normal Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20em28xx: fix a regression caused by changeset 9630Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> If removing and reiserting the driver on some devices, tuner type will be unset at the second time. This patch fixes this issue. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20em28xx: devices with xc2028/3028 don't have tda9887Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> This patch cleans up the entries of xc2028/3028, since those devices don't need or use a tda9887. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20em28xx: fix Pixelview PlayTV board entryMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Pixelview uses a Sigmatel stac codec. It has an external line out pin, connected to AC97_MASTER_VOL. It also provides I2S output, but using a different volume for this (AC97_MONO_VOL). Now that AC97 setup is finally fixed, such boards will work better. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20Allow opening more than one output at the same timeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some devices use more than one AC97 outputs. This patch allows such devices to properly work. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20em28xx: Add detection of Sigmatel Stac97xx series of AC97 devicesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20em28xx: allow specifying audio outputMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some boards use different AC97 setups for output. This patch adds the capability of specifying the output to be used. Currently, only one output is selected, but the better is to allow user to select it via a mixer, on alsa driver. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20em28xx: Fix a stupid cut-and-paste errorMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 16:15:53 +0000