summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2008-05-25cx18: move gpio_dir/val statics to the cx18 struct.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The gpio_dir/val statics cannot be global, they are card-specific. Thanks to Andy Walls for pointing this out. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-25cx18: mark Compro H900 as fully supported.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> I always assumed that the Compro H900 could do digital as well, but it turned out that it is an analog-only card. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-25cx18: allow for simultaneous digital and analog captureHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The HVR-1600 can do both analog and digital capture at the same time. Due to a driver bug -EBUSY would be returned when attempting to setup an analog capture while a digital capture was already in progress. Separate the two internally. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-24ivtv: bump version to 1.3.0.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-21cx18: fix audio registers 808 and 80cHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The handling of the audio registers 808 and 80c were based on old datasheets. Updated to the latest information. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-20ivtv: simplify gpio initialization for XCeive tuners.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Separate gpio_init field and xceive_pin and combine the two when the gpio is initialized. So there is no longer any need to set the xceive pin in the gpio_init values, simplifying the creation of a new card definition. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-20ivtv: add support for the Buffalo PC-MV5L/PCI card.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Thanks to Peter Brandt for doing the necessary tests to fill out the card definition! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-20cx18: ensure that the xceive pin is always asserted on init.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-13ivtv/cx18: snprintf fixesHans Verkuil
From: Jean Delvare <khali@linux-fr.org> snprinf() takes the trailing \0 into account in its length calculations, so there is no need to subtract 1 to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-14 zoran: use correct type for CPU flagsMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> locking-add-typecheck-on-irqsave-and-friends-for-correct-flags.patch will cause drivers/media/video/zoran_driver.c: In function 'zoran_close_end_session': drivers/media/video/zoran_driver.c:1172: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14pvrusb: Fix Kconfig if DVB=m V4L_core=yMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Ingo Molnar: x86.git testing found the following build failure: drivers/built-in.o: In function `pvr2_dvb_feed_thread': pvrusb2-dvb.c:(.text+0x127e78): undefined reference to `dvb_dmx_swfilter' drivers/built-in.o: In function `pvr2_dvb_adapter_exit': pvrusb2-dvb.c:(.text+0x128357): undefined reference to `dvb_net_release' pvrusb2-dvb.c:(.text+0x12836f): undefined reference to `dvb_dmxdev_release' [...] with this config: CONFIG_VIDEO_PVRUSB2=y CONFIG_DVB_CORE=m i.e. pvrusb2 is built-in, dvb-core is modular. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14Fixes a few remaining Kbuild issues at common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - MEDIA_ATTACH now applies also for V4L; - select a FW_LOADER dependent driver should happen only if HOTPLUG; - apply the common tuner dependency to all tuners. This helps to avoid latter issues. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14Fix VIDEO_MEDIA Kconfig logicMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> If one of DVB_CORE or VIDEO_DEV is a module, the modules that can be used by both DVB and V4L cores should also be a module, otherwise, it will break its dependencies. This Kconfig logic implements the following: CONFIG_VIDEO_DEV CONFIG_DVB_CORE CONFIG_VIDEO_MEDIA N N N N M M N Y Y M N M M M M M Y M Y N Y Y M M Y Y Y Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-13 TCM825x: Include invertation of image mirroring in configurationMauro Carvalho Chehab
From: Sakari Ailus <sakari.ailus@nokia.com> Add invertation of image mirroring register bits to default configuration. This is useful when the camera module is e.g. mounted upside down. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-13merge: http://linuxtv.org/hg/~mkrufky/tveepromMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-13merge: http://linuxtv.org/hg/~mkrufky/xc5000Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-13merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-12merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-12tveeprom: update Hauppauge analog audio and video decodersMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-12saa7134: fixed a compile warning in saa7134-core.cHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> patch 779169257208 made the variable mask unnecessary. This patch just removes the declaration. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-05-12cx18/ivtv: fix open() kernel oopsHans Verkuil
Andy Walls <awalls@radix.net> Upon error conditions in cx18/ivtv_probe(), the code at the 'err:' label leaves a NULL entry in cx18/ivtv_cards[]. This can cause a NULL pointer de-reference in cx18/ivtv_v4l2_open() which is fixed by this patch. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12cx18: removed bogus and confusing conditionalHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12cx18: improve HVR-1600 detection.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12cx18: minor card definition updates.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12cx18: fix Compro H900 analog support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Tuner, S-Video and Composite are all working for the Compro H900. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12ivtvfb: Use DMA for write()Hans Verkuil
From: Ian Armstrong <ian@iarmst.co.uk> write() operations to the ivtv framebuffer will now attempt to use DMA if the amount of data to copy is >= 4096 bytes. This change effectively depreciates the need for the proprietary IVTVFB_IOC_DMA_FRAME ioctl since a write() of sufficient size will do the same thing. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12ivtv/cx18: add compat_ioctl entriesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-11pvrusb2: make default frequency configurable via modprobe optionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The pvrusb2 driver initially sets the tuner to known broadcast frequencies in the Chicago area, to ease driver testing for the maintainer. This patch keeps those default frequencies, but allows them to be altered via modprobe option. This allows the same ease and convenience for testing multiple pvrusb2 devices one after another under other conditions and areas. For instance, the default initial frequency, 175.25 MHz, might not necessarily be valid on all cable television networks, but usually will be a valid NTSC broadcast channel. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com>
2008-05-10xc5000: bug-fix: allow multiple devices in a single systemMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The current code passes a context pointer in the xc5000_config struct. This context pointer is used in the tuner_callback function, used to reset the device after firmware download. The xc5000_config struct is a static structure, whose .priv member was being assigned before calling xc5000_attach(). If there are more than one of the same device type installed on a single system, the last one to assign xc5000_config.priv will "win", and all others will cease to function properly. This patch passes the context pointer in xc5000_attach() rather that storing it within the static struct xc5000_config. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-09pvrusb2: make code staticMike Isely
From: Adrian Bunk <bunk@kernel.org> This patch makes the following needlessly global code static: - pvrusb2-devattr.c: struct pvr2_onair_creator_fe_props - pvrusb2-devattr.c: struct pvr2_onair_usb2_fe_props - pvrusb2-devattr.c: struct pvr2_73xxx_dvb_props - pvrusb2-devattr.c: struct pvr2_750xx_dvb_props - pvrusb2-devattr.c: struct pvr2_751xx_dvb_props - pvrusb2-hdw.c:pvr2_led_ctrl_hauppauge() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mike Isely <isely@pobox.com>
2008-05-09saa7134: remove explicit GPIO initializationHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This causes a problem with the audio mute on some cards and is done implictly in the audio initialization code. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-05-01Adding cx18 Support for mxl5005sMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Adding cx18 Support Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-08mxl55005s: Makefile and Kconfig additionsMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Makefile and Kconfig additions Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-03mxl5005s: Ensure debug is offMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Ensure debug is off Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-03mxl5005s: Remove incorrect copyright holdersMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> I was informed by Jan Hoogenraad that two people needed to be removed from the original copyright comments. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-03mxl5005s: Remove redundant functionsMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Remove redundant functions Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-03mxl5005s: Fix function staticsMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Fix function statics Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-03mxl5005s: Fix header includes.Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Ensure we have the correct .h dependencies included. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: checkpatch.pl complianceMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> 4 exceptions where the code would read very ugly otherwise. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Re-org code and update copyrightsMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Re-org code and update copyrights Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Basic digital support.Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> ATSC and QAM should be working but basic testing is required. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Cleanup #6Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Cleanup #6 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Cleanup #5Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Cleanup #5 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Cleanup #4Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Cleanup #4 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Cleanup #3Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Cleanup #3 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Cleanup #2Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Cleanup #2 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01mxl5005s: Cleanup #1Mauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Cleanup #1 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01Add mxl5505s driver for MaxiLinear 5505 chipsetsMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Initial check-in of the original driver to establish history. Signed-off-by: Chia-Ling Lu Developer <chialing@realtek.com.tw> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30mt312: Prefix functions only with mt312_, Add zl10313 to kconfig descriptionMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> This patch does some small cleanup to mt312. It changes kconfig description to also list the ZL10313. It does change some strange symbol names to be consistent with module name mt312 and naming of all other functions in there. * vp310_mt312_ops -> mt312_ops * vp310_mt312_attach -> mt312_attach Adds a MODULE_AUTHOR for me Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-07merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 18:52:58 +0000