summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2008-11-13af9015: don't reconnect device in USB-busAntti Palosaari
From: Jose Alberto Reguero <jareguero@telefonica.net> Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it. Priority: high Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-11-13tvaudio: update initial commentsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13tvaudio: add additional logic to avoid OOPSMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Priority: high Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13tvtime: avoid OOPS at generic_checkmode()Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Priority: high Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13tvaudio: cleanup - group all callbacks togetherMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13tvaudio: instead of using a magic number, use ARRAY_SIZEMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Also, the default standard is the first one. So, fix the comment at the array. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13tvaudio: Make sure that we don't overflow name bufferMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13tvaudio: fix a memory leakMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13drivers/media: use ARRAY_SIZEMauro Carvalho Chehab
From: Julia Lawall <julia@diku.dk> ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(E[...])) + ARRAY_SIZE(E) @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14usb vendor_ids/product_ids are __le16Mauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Noticed by sparse: drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-15dvb: cinergyt2 annotate struct endianness, remove unused variable, add staticMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> All noticed by sparse: drivers/media/dvb/dvb-usb/cinergyT2-core.c:35:5: warning: symbol 'disable_remote' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-core.c:48:23: warning: symbol 'cinergyt2_usb_device' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-fe.c:160:15: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:190:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:208:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:227:24: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: expected unsigned short [unsigned] [assigned] [usertype] tps drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: got restricted __le16 [usertype] <noident> drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: expected unsigned int [unsigned] [assigned] [usertype] freq drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: got restricted __le32 [usertype] <noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Thierry Merle <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-15v4l: s2255drv fix firmware test on big-endianMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Noticed by sparse: drivers/media/video/s2255drv.c:2531:6: warning: restricted __le32 degrades to integer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Make sure the i2c gate is open before powering down tunerMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> It is not safe to assume that the i2c gate will be open before issuing the command to power down the tuner. In fact, many demods only open the gate long enough to issue the tuning command. This fix allows power management to work properly for those tuners behind an i2c gate (in my case the problem was with the HVR-950Q) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Put s5h1411 into low power mode at end of attach() callMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Place the s5h1411 into low power mode until first use (to handle the case where the user plugs in the device and then doesn't use it for a while). On the Pinnacle 801e, this brings the power usage from 126ma down to 82ma. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-15make em28xx aux audio input workMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> The attached patch makes the em28xx auxillary audio input work. Tested with the HVR-950. em28xx: make auxillary audio input work The tuner audio input was working but the aux input wasn't. Tested with the HVR-950. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Make s2api work for ATSC supportMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> ATSC should be considered a legacy delivery system, or else fields such as p->u.vsb.modulation do not get populated (resulting in set_frontend failures) CC: Steven Toth <stoth@linuxtv.org> Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Some boards need to specify tuner addressMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Add support for the ATI TV Wonder HD 600 USB Remote ControlMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Add support for the ATI TV Wonder HD 600 USB Remote Control (required a new keymap) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> [mchehab@redhat.com: Fix CodingStyle] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-13em28xx: refactor IR supportMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Refactor the em28xx IR support based on the em2860/em2880 and em2874 datasheets. Tested on the HVR-950 (em2883), Pinnacle 800e (em2883), Pinnacle 80e (em2874) using the remote controls that came with those products. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16em28xx: Avoid i2c register error for boards without eepromMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-12Fix key repetition with HVR-950 IRMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-12em28xx: experimental support for HVR-950 IRMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-12ttusb-dec: make it depend on PCIMauro Carvalho Chehab
From: Mike Frysinger <vapier@gentoo.org> Since ttusb_dec.c relies on pci_alloc_consistent and pci_free_consistent, make it depend on PCI in Kconfig. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-12ttusb-budget: make it depend on PCIMauro Carvalho Chehab
From: Mike Frysinger <vapier@gentoo.org> Since dvb-ttusb-budget.c relies on pci_alloc_consistent and pci_free_consistent, make it depend on PCI in Kconfig. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-27cx23885: unsigned cx23417_mailbox cannot be negativeMauro Carvalho Chehab
From: roel kluin <roel.kluin@gmail.com> Unsigned cx23417_mailbox cannot be negative Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-backportMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30v4l: fix compile errors for older kernelsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30cx24116 - build fixMauro Carvalho Chehab
From: Cyrill Gorcunov <gorcunov@gmail.com> Add missed MODULE check to eliminate inapropriate declaration being choosed which causes a build error. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30use USB API functions rather than constantsMauro Carvalho Chehab
From: Julia Lawall <julia@diku.dk> This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30v4l2: debugging API changed to match against driver name instead of ID.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30gp8psk: fix incorrect return code (EINVAL instead of -EINVAL)Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30v4l: rename v4l_compat_ioctl32 to v4l2_compat_ioctl32Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This rename prevents conflicts with the older compat_ioctl32 module. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30v4l2-ioctl: change to long return type to match unlocked_ioctl.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Since internal to v4l2 the ioctl prototype is the same regardless of it being called through .ioctl or .unlocked_ioctl, we need to convert it all to the long return type of unlocked_ioctl. Thanks to Jean-Francois Moine for posting an initial patch for this and thus bringing it to our attention. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: Jean-Francois Moine <moinejf@free.fr>
2008-12-23v4l2-compat32: only build if neededHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add CONFIG_COMPAT check in Makefile. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-23v4l2 doc: update v4l2-framework.txtHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Mention the new v4l2_file_operations struct. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30v4l2: introduce v4l2_file_operations.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Introduce a struct v4l2_file_operations for v4l2 drivers. Remove the unnecessary inode argument. Move compat32 handling (and llseek) into the v4l2-dev core: this is now handled in the v4l2 core and no longer in the drivers themselves. Note that this changeset reverts an earlier patch that changed the return type of__video_ioctl2 from int to long. This change will be reinstated later in a much improved version. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-23v4l2 doc: set v4l2_dev instead of parent.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Update the documentation now that the v4l2_dev field is in. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-22v4l2-framework: use correct comment style.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-23v4l2-compat-ioctl32: remove dependency on videodev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30merge: http://linuxtv.org/hg/~dheitmueller/v4l-dvb-em28xx-fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29em28xx: Don't do AC97 vendor detection for i2s audio devicesDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The current code was trying to query the AC97 registers for the vendor information even if it was clearly not a AC97 audio device (resulting in errors in the dmesg output). This was due to a bug in the way we did the check. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-30zoran: fix warning for a variable not usedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Fix this warning: drivers/media/video/zoran/zoran_card.c:156: warning: ‘zr36067_pci_tbl’ defined but not used Currently, zoran driver relies on a find routine that doesn't use the pci table. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29em28xx: expand output formats availableDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add additional output formats, which will be useful for the Pinnacle PCTV Ultimate 880e integration with the saa7136. Thanks to Ray Lu from Empia for providing the em2860/em2880 datasheet. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-30af9013: Fix gcc false warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/dvb/frontends/af9013.c: In function ‘af9013_set_coeff’: drivers/media/dvb/frontends/af9013.c:231: warning: ‘ns_coeff2_8k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:230: warning: ‘ns_coeff2_2k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:229: warning: ‘ns_coeff1_8193nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:228: warning: ‘ns_coeff1_8192nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:227: warning: ‘ns_coeff1_8191nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:226: warning: ‘ns_coeff1_2048nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c: In function ‘af9013_update_snr’: drivers/media/dvb/frontends/af9013.c:1012: warning: ‘snr_table’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Antti Palosaari <crope@iki.fi>
2008-12-29em28xx: fix reversed definitions of I2S audio modesDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Noticed when doing the audio support for the Pinnacle PCTV HD Ultimate 808e that the modes were incorrect (the 808e uses I2S in 5 sample mode) Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-29em28xx: don't load em28xx-alsa for em2870 based devicesDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Like the em2874, the em2870 does not have any analog support, so don't bother loading the em28xx-alsa module. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-29em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profileDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The Pinnacle 80e cannot be supported since Micronas yanked their driver support for the drx-j chipset at the last minute. Remove the device profile since it cannot work without the drx driver and it being there is only likely to confuse people into thinking the device is supported but not working. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-29em28xx: remove redundant Pinnacle Dazzle DVC 100 profileDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The DVC 100 profile is redundant since we already have an existing identical profile named "Pinnacle Dazzle DVC 90/DVC 100" Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2008-12-29em28xx: fix corrupted XCLK valueDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Correct problem introduced during the board refactoring where the XCLK frequency would get zero'd out. The sequence of events was as follows: em28xx_pre_card_setup() called em28xx_set_model() em28xx_set_model() would memcpy to dev->board configuration em28xx_pre_card_setup() would set the dev->board.xclk if not set em28xx_pre_card_setup() would set the XCLK register based on dev->board.xclk ... em28xx_card_setup() would call em28xx_set_model() em28xx_set_model() would memcpy to dev->board configuration (clearing out value of dev->board.xclk set in em28xx_pre_card_setup) ... em28xx_audio_analog_set() sets the XCLK register based on dev->board.xclk (which now contains zero) The change sets the default XCLK and I2C Clock fields in the board definition inside of em28xx_set_model() so that subsequent calls do not cause the values to be overwritten. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 23:06:44 +0000