summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2008-12-18v4l: add chip ID for MT9M112 camera sensor from MicronGuennadi Liakhovetski
From: Mike Rapoport <mike@compulab.co.il> The chip is largely compatible with MT9M111 and is going to be supported by the same driver. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- include/media/v4l2-chip-ident.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
2008-12-18pxa-camera: setup the FIFO inactivity time-out registerGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Using PXA270's FIFO inactivity time-out register (CITOR) reduces FIFO overruns. The time-out is calculated in CICLK / LCDCLK ticks and has to be longer than one pixel time. For this we have to know the pixel clock frequency, which usually is provided by the camera. We use the struct soc_camera_sense to request PCLK frequency from the camera driver upon each data format change. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> --- drivers/media/video/pxa_camera.c | 90 +++++++++++++++++++++++++++++--------- 1 files changed, 69 insertions(+), 21 deletions(-)
2008-12-18soc-camera: add camera sense dataGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Add a struct soc_camera_sense, that can be used by camera host drivers to request additional information from a camera driver, for example, when changing data format. This struct can be extended in the future, its first use is to request the camera driver whether the pixel-clock frequency has changed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> --- include/media/soc_camera.h | 27 +++++++++++++++++++++++++++ 1 files changed, 27 insertions(+), 0 deletions(-)
2008-12-18mt9m111: Add automatic white balance controlGuennadi Liakhovetski
From: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m111.c | 28 +++++++++++++++++++++++++++- 1 files changed, 27 insertions(+), 1 deletions(-)
2008-12-23soc-camera: Add signal inversion flags to be used by camera driversGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> As reported by Antonio Ospite <ospite@studenti.unina.it> two platforms with a mt9m111 camera require opposite pixel clock polarity, which means one of them inverts it. This patch adds support for inversion flags and switches all available camera drivers to using them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m001.c | 15 +++++++-------- drivers/media/video/mt9m111.c | 6 +++++- drivers/media/video/mt9v022.c | 3 +++ drivers/media/video/ov772x.c | 10 +++++----- drivers/media/video/soc_camera.c | 34 ++++++++++++++++++++++++++++++++++ include/media/soc_camera.h | 11 +++++++++++ 6 files changed, 65 insertions(+), 14 deletions(-)
2008-12-18V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registersGuennadi Liakhovetski
From: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-12-18[ARM] pxa: move camera (QCI) registers definition out of pxa-regs.hGuennadi Liakhovetski
From: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> kernel-sync:
2008-12-18Add ov7725 support to ov772x driverGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov772x.c | 22 ++++++++++++++++++++++ include/media/v4l2-chip-ident.h | 1 + 2 files changed, 23 insertions(+), 0 deletions(-)
2008-12-18Change device ID selection method on ov772x driverGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-12-17gspca - spca561: Don't get the control values from the webcam.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-17gspca - spca561: Cleanup source.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-17Remove ov772x_default_regs from ov772x driverGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov772x.c | 21 +++------------------ 1 files changed, 3 insertions(+), 18 deletions(-)
2008-12-17mt9m001 mt9v022: fix bus-width switch GPIO availability testGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Testing for non-NULL platform-data is not enough, we have to check if the GPIO in the platform data is valid or not. Also see my earlier patch: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m001.c | 5 +++-- drivers/media/video/mt9v022.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)
2008-12-17mt9m111: add all yuv format combinations.Guennadi Liakhovetski
From: Robert Jarzmik <robert.jarzmik@free.fr> The Micron mt9m111 offers 4 byte orders for YCbCr output. This patchs adds all possible outputs capabilities to the mt9m111 driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m111.c | 24 +++++++++++++++++++++++- 1 files changed, 23 insertions(+), 1 deletions(-)
2008-12-17mt9m111: mt9m111_get_global_gain() - unsigned >= 0 is always trueGuennadi Liakhovetski
From: roel kluin <roel.kluin@gmail.com> unsigned >= 0 is always true and fix formula Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m111.c | 13 +++++-------- 1 files changed, 5 insertions(+), 8 deletions(-)
2008-12-15gspca - pac7311: Webcam 093a:262c added.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-15merge: v4l-dvbJean-Francois Moine
2008-12-14gspca - pac207: Update my email address.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-12-01Correct the name of the Pascal Stangs libraryErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Use read/modify/write when toggling vflip on the po1030Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27The po1030 never sends long i2c messages, no need to test for that in the ↵Erik Andrén
init phase From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the s5k83a specific read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Convert the s5k83a sensor to use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the s5k4aa implementation of the read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Convert the s5k4aa sensor to use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the mt9m111 implementation of the read_sensor function.Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Convert the mt9m111 to use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the po1030 read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Let the po1030 use the common read_sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Remove the ov9650 implementation of the read sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Let the ov9650 use the common read sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-27Toggle read sensor sequence depending on type of sensor. Check that no more ↵Erik Andrén
than max width of a sensor is read
2008-11-27Backed out changeset 394ff1552cd4Erik Andrén
2008-11-26Add flush control to each sensorErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26Add initial read sensor implementationErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26Remove all sensor specific write functions.Erik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26Convert all sensors to use the unified write sensor functionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-26First step into unifying the read and write sensor functionsErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-25Remove the write and read sensor members from the main structErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-25Add vflip quirk for the ASUS A6JaErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-24Convert some functions to be staticErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-24Checkpatch.pl fixesErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Refactor the error handling in the s5k83aErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Align some definesErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Cleanup the s5k4aa error handling, cull some commentsErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Cleanup the po1030 sensor error handlingErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Simplify the error handling in the ov9650 sensorErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Simplify error handling in the mt9m111 sensor codeErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-20Minor fixesErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2008-11-19Add lost ampersand. This restores the correct boolean expressionErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-28 18:58:52 +0000