summaryrefslogtreecommitdiff
path: root/linux
AgeCommit message (Collapse)Author
2008-06-10gl861: replace non critical msleep(0) with msleep(1) to be on the safe sideAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-10Anysee: support for Anysee E30C Plus rev 0.4Antti Palosaari
From: Antti Palosaari <crope@iki.fi> - support for Anysee E30C Plus rev 0.4 - set IO port E - set correct TS mode - change deltaf according to latest Windows driver Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-10TDA10023: make TS output mode configurableAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - make TS output mode configurable Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-09 em28xx: enable DVB for HVR-900Mauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> em28xx-cards.c - DVB support is supposed to be enabled for the first generation HVR-900. This device was confirmed with DVB by mkrufky when we did the original work in April, but I guess we forgot to set the flag. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-09 em28xx: Properly register extensions for already attached devicesMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> em28xx-video.c - Properly handle loading of the module when multiple devices are already connected (such as at bootup). Before we were only calling dvb_init() against the last device in the list, so while we were handling subsequent adds properly, if there were multiple devices present on driver load, everybody except the last device would not get initialized. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-09From: Jean-Francois Moine <moinejf@free.fr>Jean-Francois Moine
Update from main repository. Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-06-08tda18271: toggle rf agc speed mode on TDA18271HD/C2 onlyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-08tda18271: dont touch EB14 if rf_cal lookup is out of rangeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The TDA18271HD/C1 rf_cal map lookup is expected to go out of range outside of the frequency window 41 MHz - 61.1 MHz. In these cases, the internal RF tracking filters calibration mechanism is used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-08tda18271: fix IF notch frequency handlingMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The IF notch bit gets unset when we update the Main Post Div register value, before we have a chance to write the desired IF notch setting to the tuner. Move the IF notch configuration to after we update MPD. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-08merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-08From: Devin Heitmueller <devin.heitmueller@gmail.com>Mauro Carvalho Chehab
em28xx: Split HVR900 into two separate entries - Separate the newer variant of the HVR-900 into its own device profile because it has a Micronas DRX397 instead of the Zarlink demod. This doesn't make the device work, but at least we don't try to initialize it as though it had the Zarlink device. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-08cx18: remove duplicate audio and video input enumsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> cx18-cards.h had a copy of the audio and video input enums from cx18-av-core.h, but with different prefixes. Removed that copy and used the ones from cx18-av-core.h. Thanks to Andy Walls <awalls@radix.net> for the report. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-07Fix OOPS if frontend is nullMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to timf <timf@iinet.net.au> and Mike Galbraith <efault@gmx.de> to report this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-07cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-05Fix INPUT dependency at budget-ciMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05Backport ivtv i2c changes to better work with the newer I2C codeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05merge: http://linuxtv.org/hg/~mkrufky/bug-fixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05Backport a few fixes from mainstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - use asm/byteorder.h, instead of linux/byteorder/generic.h - A small Kconfig fix for soc_camera Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-05backport I2C changes on several filesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Some I2C API change patches were committed at kernel. Backport those changes to V4L/DVB tree. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05tda827x: fix NULL pointer in tda827xa_lna_gainMichael Krufky
From: Sigmund Augdal <sigmund@snap.tv> Check that tda827x_config is defined before attempting to use it. Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-02unplug oops from dvb_frontend_init...Mauro Carvalho Chehab
From: Daniel J Blueman <daniel.blueman@gmail.com> When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with 2.6.24, I was met with an oops [1]. The problem is relevant to 2.6.25/26-rc also. dvb_frontend_init() was called either from re-creation of the kdvb-fe0 thread - seems unlikely, or someone called dvb_frontend_reinitialise(), causing this path in the thread - really unlikely, as I can't find any call-site for it. Either way, quite a number of drivers call dvb_usb_generic_rw() [2] without checking the validity of the relevant member in the dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw() sanity-check and fail (rather than loading from 0x120) seems reasonable defensive programming [3], in light of it being called in this way. The problem with this, is that drivers don't check the return code of the init call [4]. Does it make sense to cook a patch which allows the failure to be propagated back up, or am I missing something else? Thanks, Daniel <whoops, hot unplug> [83711.538485] dvb-usb: bulk message failed: -71 (1/0) [83711.538875] dvb-usb: bulk message failed: -71 (1/0) [83711.538899] usb 7-5: USB disconnect, address 3 [83711.538905] dvb-usb: bulk message failed: -22 (1/0) [83711.538924] dvb-usb: bulk message failed: -22 (1/0) [83711.538943] dvb-usb: bulk message failed: -22 (1/0) [83711.588979] dvb-usb: bulk message failed: -22 (1/0) [83711.589031] dvb-usb: bulk message failed: -22 (1/0) [83711.589078] dvb-usb: bulk message failed: -22 (1/0) [83711.589122] dvb-usb: bulk message failed: -22 (1/0) [83711.589167] dvb-usb: bulk message failed: -22 (1/0) [83711.639233] dvb-usb: bulk message failed: -22 (1/0) [83711.639282] dvb-usb: bulk message failed: -22 (1/0) [83711.639330] dvb-usb: bulk message failed: -22 (1/0) [83711.639374] dvb-usb: bulk message failed: -22 (1/0) [83711.639421] dvb-usb: bulk message failed: -22 (1/0) [83711.658391] dvb-usb: bulk message failed: -22 (1/0) [83768.174281] dvb-usb: bulk message failed: -22 (2/-32512) [83768.174350] Unable to handle kernel NULL pointer dereference<6>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully deinitialized and disconnected. [83768.174459] at 0000000000000120 RIP: [83768.174459] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.174580] PGD 0 [83768.174643] Oops: 0000 [1] SMP [83768.174723] CPU 0 [83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6 button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore e1000 thermal processor fan fbcon tileblit font bitblit softcursor fuse [83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1 [83768.177009] RIP: 0010:[<ffffffff88339b4f>] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286 [83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000 [83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000 [83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400 [83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000 [83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000) knlGS:0000000000000000 [83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0 [83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo ffff810021938000, task ffff81003bd1b7a0) [83768.177629] Stack: ffff81003e9b6828 0000000000000000 ffff8100378369f8 0000000000000000 [83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30 ffff81003c10b400 [83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0 ffffffff88342452 [83768.178054] Call Trace: [83768.178130] [<ffffffff88342452>] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30 [83768.178178] [<ffffffff88339f6a>] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50 [83768.178229] [<ffffffff88325c41>] :dvb_core:dvb_frontend_init+0x21/0x70 [83768.178278] [<ffffffff8832746b>] :dvb_core:dvb_frontend_thread+0x8b/0x370 [83768.178329] [<ffffffff883273e0>] :dvb_core:dvb_frontend_thread+0x0/0x370 [83768.178382] [<ffffffff80253e3b>] kthread+0x4b/0x80 [83768.178427] [<ffffffff8020d198>] child_rip+0xa/0x12 [83768.178473] [<ffffffff80253df0>] kthread+0x0/0x80 [83768.178514] [<ffffffff8020d18e>] child_rip+0x0/0x12 [83768.178557] [83768.178594] [83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0 0f 84 ad 00 [83768.179167] RIP [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.179234] RSP <ffff810021939df0> [83768.179271] CR2: 0000000000000120 [83768.179419] ---[ end trace dba8483163cb1700 ]--- Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-27rationalise addresses to one common oneMauro Carvalho Chehab
From: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-29linux-next: v4l-dvb tree build failureMauro Carvalho Chehab
From: Stephen Rothwell <sfr@canb.auug.org.au> Today's linux-next build (x86_64 allmodconfig) failed like this: drivers/media/dvb/dvb-core/dvbdev.c: In function 'dvb_register_device': drivers/media/dvb/dvb-core/dvbdev.c:254: error: implicit declaration of function 'nums2minor' Caused by commit f3d9182030d9655d9ffff33dfceb45b4a127b6ec ("V4L/DVB (9361): Dynamic DVB minor allocation") which clearly has not even been built with CONFIG_DVB_DYNAMIC_MINORS=y. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30merge: http://linuxtv.org/hg/~tlorenz/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30merge: http://jusst.de/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30merge: http://linuxtv.org/hg/~awalls/cx18-bugfixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30Fix frontend DVBFE_ALGO_CUSTOM SearchManu Abraham
Issue: Currently, the DVBFE_ALGO_CUSTOM is called only at the first tuning. After the first call, the status is never set to force a new tuning. From: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-28Wait for a maximum of 100mSManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-28ivtv/ivtvfb: no longer experimentalHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remove the EXPERIMENTAL tag. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-10-28ivtv: remove incorrect V4L1 & tvaudio dependencyHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> ivtv used tvaudio in the past and at the time tvaudio required V4L1. Since tvaudio is no longer dependent on V4L1 and since ivtv actually no longer uses tvaudio at all, this is no removed from Kconfig. Without this patch ivtv won't be build if V4L1 is disabled. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-10-28Documentation, especially regarding audio and informational linksTobias Lorenz
From: Tobias Lorenz <tobias.lorenz@gmx.net> This patch adds a recommendation to select SND_USB_AUDIO for listing and adds a documentation file for si470x. Priority: normal Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
2008-10-28Fix: parameters not supplied in the search processManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-28Fix: Commit 9344 breaks tning of cx24123Manu Abraham
From: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-25cx18: Disable write retries for registers that always change - part 1.Andy Walls
From: Andy Walls <awalls@radix.net> cx18: Disable write retries for registers that always change - part 1. Interrupt related registers will likely not read back the value we just wrote. Disable retries for these registers for now to avoid accidently discarding interrupts. More intelligent read back verification criteria are needed for these and other registers (e.g. GPIO line registers), which will be addressed in subsequent changes. Priority: high Signed-off-by: Andy Walls <awalls@radix.net>
2008-10-25cx18: Remove redundant block scope variable in cx18_probe() for sparseAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Remove redundant block scope variable in cx18_probe() to eliminate sparse build warning. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2008-10-24Add ov772x driverKuninori Morimoto
This patch adds ov772x driver that use soc_camera framework. It was tested on SH Migo-r board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- Patch v7 -> v8 fix SWAP_MASK mistake remove empty lines. drivers/media/video/Kconfig | 6 + drivers/media/video/Makefile | 1 + drivers/media/video/ov772x.c | 966 +++++++++++++++++++++++++++++++++++++++ include/media/ov772x.h | 21 + include/media/v4l2-chip-ident.h | 1 + 5 files changed, 995 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/ov772x.c create mode 100644 include/media/ov772x.h
2008-10-22v4l: rename compat_ioctl32.c to v4l2-compat-ioctl32.cHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> All core v4l sources should start with 'v4l2-' This file was the last one for which this was not the case. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-30v4l2-dev: replace panic with BUGHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-30v4l: fix assorted compile warnings/errorsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-31 si470x: hardware frequency seek supportMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> this patch brings the following changes: - this now finally adds hardware frequency seek support Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-31 si470x: afc indicationMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> this patch brings the following changes: - afc indication: device has no indication whether freq is too low or too high therefore afc always return 1, when freq is wrong Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-31 si470x: a lot of small code cleanupsMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> this patch brings the following changes: - comment on how to listen to an usb audio device   (i get so many questions about that...) - code cleanup (error handling, more warnings, spacing, ...) Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-31 si470x: let si470x_get_freq return errnoMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> Hi Mauro, this patch brings the following changes: - version bumped to 1.0.8 for all the following patches - si470x_get_freq now returns errno Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-31 si470x: move global lock to device structureMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> this patch brings the following changes: - move the global disconnect lock into the device structure - code cleanup (spaces to tabs, long line splits, ...) Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-04From: Devin Heitmueller <devin.heitmueller@gmail.com>Mauro Carvalho Chehab
Add support for Pinnacle PCTV HD Pro stick (the older variant 2304:0227) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-03From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>Mauro Carvalho Chehab
Fix entry for PowerColor RA 330 and make it run with firmware version 2.7 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-03merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-socMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-09 06:41:21 +0000