From cfc8abd9b55723cd9479aeb09ef1762aab9fa8bc Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Jul 2008 17:11:28 -0400 Subject: au8522: add mechanism to configure IF frequency for vsb and qam From: Michael Krufky Add a mechanism to configure IF frequency for vsb and qam. Signed-off-by: Michael Krufky --- linux/drivers/media/dvb/frontends/au8522.c | 66 ++++++++++++++++++++++++++++++ linux/drivers/media/dvb/frontends/au8522.h | 9 ++++ 2 files changed, 75 insertions(+) diff --git a/linux/drivers/media/dvb/frontends/au8522.c b/linux/drivers/media/dvb/frontends/au8522.c index 37f6260e1..d968a1000 100644 --- a/linux/drivers/media/dvb/frontends/au8522.c +++ b/linux/drivers/media/dvb/frontends/au8522.c @@ -304,6 +304,70 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, return ret; } +/* 3.25 MHz IF Frequency table */ +static struct { + u16 reg; + u16 data; +} if_3_25_mhz_tab[] = { + { 0x80b5, 0x00 }, + { 0x80b6, 0x3d }, + { 0x80b7, 0xa0 }, +}; + +/* 4.00 MHz IF Frequency table */ +static struct { + u16 reg; + u16 data; +} if_4_mhz_tab[] = { + { 0x80b5, 0x00 }, + { 0x80b6, 0x4b }, + { 0x80b7, 0xd9 }, +}; + +/* 6.00 MHz IF Frequency table */ +static struct { + u16 reg; + u16 data; +} if_6_mhz_tab[] = { + { 0x80b5, 0xfb }, + { 0x80b6, 0x8e }, + { 0x80b7, 0x39 }, +}; + +static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq) +{ + struct au8522_state *state = fe->demodulator_priv; + int i; + + switch (if_freq) { + case AU8522_IF_3_25MHZ: + dprintk("%s() 3.25 MHz\n", __func__); + for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++) + au8522_writereg(state, + if_3_25_mhz_tab[i].reg, + if_3_25_mhz_tab[i].data); + break; + case AU8522_IF_4MHZ: + dprintk("%s() 4.00 MHz\n", __func__); + for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++) + au8522_writereg(state, + if_4_mhz_tab[i].reg, + if_4_mhz_tab[i].data); + break; + case AU8522_IF_6MHZ: + dprintk("%s() 6.00 MHz\n", __func__); + for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++) + au8522_writereg(state, + if_6_mhz_tab[i].reg, + if_6_mhz_tab[i].data); + break; + default: + dprintk("%s() IF Frequency not supported\n", __func__); + return -EINVAL; + } + return 0; +} + /* VSB Modulation table */ static struct { u16 reg; @@ -438,6 +502,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe, au8522_writereg(state, VSB_mod_tab[i].reg, VSB_mod_tab[i].data); + au8522_set_if(fe, state->config->vsb_if); break; case QAM_64: case QAM_256: @@ -446,6 +511,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe, au8522_writereg(state, QAM_mod_tab[i].reg, QAM_mod_tab[i].data); + au8522_set_if(fe, state->config->qam_if); break; default: dprintk("%s() Invalid modulation\n", __func__); diff --git a/linux/drivers/media/dvb/frontends/au8522.h b/linux/drivers/media/dvb/frontends/au8522.h index d7affa3cd..afc9af26e 100644 --- a/linux/drivers/media/dvb/frontends/au8522.h +++ b/linux/drivers/media/dvb/frontends/au8522.h @@ -24,6 +24,12 @@ #include +enum au8522_if_freq { + AU8522_IF_6MHZ = 0, + AU8522_IF_4MHZ, + AU8522_IF_3_25MHZ, +}; + struct au8522_config { /* the demodulator's i2c address */ u8 demod_address; @@ -32,6 +38,9 @@ struct au8522_config { #define AU8522_TUNERLOCKING 0 #define AU8522_DEMODLOCKING 1 u8 status_mode; + + enum au8522_if_freq vsb_if; + enum au8522_if_freq qam_if; }; #if defined(CONFIG_DVB_AU8522) || \ -- cgit v1.2.3 From b56bf8a6147de81da31ee2fde96fe8367386383c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Jul 2008 17:13:20 -0400 Subject: au0828: add support for Hauppauge Woodbury From: Michael Krufky Signed-off-by: Michael Krufky --- linux/Documentation/video4linux/CARDLIST.au0828 | 1 + linux/drivers/media/video/au0828/Kconfig | 1 + linux/drivers/media/video/au0828/au0828-cards.c | 7 +++++++ linux/drivers/media/video/au0828/au0828-cards.h | 1 + linux/drivers/media/video/au0828/au0828-dvb.c | 21 +++++++++++++++++++++ 5 files changed, 31 insertions(+) diff --git a/linux/Documentation/video4linux/CARDLIST.au0828 b/linux/Documentation/video4linux/CARDLIST.au0828 index eedc399e8..aa05e5bb2 100644 --- a/linux/Documentation/video4linux/CARDLIST.au0828 +++ b/linux/Documentation/video4linux/CARDLIST.au0828 @@ -3,3 +3,4 @@ 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] + 5 -> Hauppauge Woodbury (au0828) [2040:8200] diff --git a/linux/drivers/media/video/au0828/Kconfig b/linux/drivers/media/video/au0828/Kconfig index ed9a50f18..018f72b8e 100644 --- a/linux/drivers/media/video/au0828/Kconfig +++ b/linux/drivers/media/video/au0828/Kconfig @@ -7,6 +7,7 @@ config VIDEO_AU0828 select DVB_AU8522 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Auvitek's USB device. diff --git a/linux/drivers/media/video/au0828/au0828-cards.c b/linux/drivers/media/video/au0828/au0828-cards.c index 443e59009..14b9fc9bb 100644 --- a/linux/drivers/media/video/au0828/au0828-cards.c +++ b/linux/drivers/media/video/au0828/au0828-cards.c @@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = { [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", }, + [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { + .name = "Hauppauge Woodbury", + }, }; /* Tuner callback function for au0828 boards. Currently only needed @@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: if (dev->i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xa0); break; @@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: /* GPIO's * 4 - CS5340 * 5 - AU8522 Demodulator @@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { USB_DEVICE(0x2040, 0x7281), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, + { USB_DEVICE(0x2040, 0x8200), + .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, { }, }; diff --git a/linux/drivers/media/video/au0828/au0828-cards.h b/linux/drivers/media/video/au0828/au0828-cards.h index c37f5fd0f..102ed03dc 100644 --- a/linux/drivers/media/video/au0828/au0828-cards.h +++ b/linux/drivers/media/video/au0828/au0828-cards.h @@ -24,3 +24,4 @@ #define AU0828_BOARD_HAUPPAUGE_HVR850 2 #define AU0828_BOARD_DVICO_FUSIONHDTV7 3 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4 +#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5 diff --git a/linux/drivers/media/video/au0828/au0828-dvb.c b/linux/drivers/media/video/au0828/au0828-dvb.c index 4c1dfdd8d..b7b0591ef 100644 --- a/linux/drivers/media/video/au0828/au0828-dvb.c +++ b/linux/drivers/media/video/au0828/au0828-dvb.c @@ -30,6 +30,7 @@ #include "au8522.h" #include "xc5000.h" #include "mxl5007t.h" +#include "tda18271.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -41,6 +42,13 @@ static struct au8522_config hauppauge_hvr950q_config = { .status_mode = AU8522_DEMODLOCKING, }; +static struct au8522_config hauppauge_woodbury_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_4MHZ, + .vsb_if = AU8522_IF_3_25MHZ, +}; + static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .i2c_address = 0x61, .if_khz = 6000, @@ -52,6 +60,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = { .if_freq_hz = MxL_IF_6_MHZ, }; +static struct tda18271_config hauppauge_woodbury_tunerconfig = { + .gate = TDA18271_GATE_DIGITAL, +}; + /*-------------------------------------------------------------------*/ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19) static void urb_completion(struct urb *purb, struct pt_regs *regs) @@ -362,6 +374,15 @@ int au0828_dvb_register(struct au0828_dev *dev) &dev->i2c_adap, 0x60, &mxl5007t_hvr950q_config); break; + case AU0828_BOARD_HAUPPAUGE_WOODBURY: + dvb->frontend = dvb_attach(au8522_attach, + &hauppauge_woodbury_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(tda18271_attach, dvb->frontend, + 0x60, &dev->i2c_adap, + &hauppauge_woodbury_tunerconfig); + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n"); -- cgit v1.2.3 From bf1df3fec5f8b21e8582a4af850615b540ead06a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 12:58:53 -0300 Subject: media/video/Kconfig: get rid of a select From: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index d4a6e56a7..93fdb8fa1 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -822,8 +822,7 @@ config VIDEO_OVCAMCHIP config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support" - depends on VIDEO_V4L1 && I2C - select VIDEO_OVCAMCHIP + depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP ---help--- Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. -- cgit v1.2.3 From c0f201cc9dd7be8c8951ecf09e97b783ff10b9b2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 13:07:42 -0300 Subject: media/video/Kconfig: cosmetic changes and convert select into depends on It seems cosmetically better to let USB drivers be the last one. Also, two SOC drivers were using select, instead of depends on SOC_CAMERA. Since select has some drawbacks when checking for dependencies, convert those two into depends on. From: Mauro Carvalho Chehab CC: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/Kconfig | 118 +++++++++++++++++++------------------- 1 file changed, 58 insertions(+), 60 deletions(-) diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 93fdb8fa1..aeaa54f3e 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -784,6 +784,64 @@ config VIDEO_CAFE_CCIC CMOS camera controller. This is the controller found on first- generation OLPC systems. +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA + select VIDEOBUF_GEN + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9M001_PCA9536_SWITCH + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config MT9M001_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9m001" + depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO + help + Select this if your MT9M001 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9V022_PCA9536_SWITCH + help + This driver supports MT9V022 cameras from Micron + +config MT9V022_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9v022" + depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO + help + Select this if your MT9V022 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_PLATFORM + tristate "platform camera support" + depends on SOC_CAMERA + help + This is a generic SoC camera platform driver, useful for testing + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x && SOC_CAMERA + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + +config VIDEO_SH_MOBILE_CEU + tristate "SuperH Mobile CEU Interface driver" + depends on VIDEO_DEV && SOC_CAMERA + select VIDEOBUF_DMA_CONTIG + ---help--- + This is a v4l2 driver for the SuperH Mobile CEU Interface + # # USB Multimedia device configuration # @@ -913,64 +971,4 @@ config USB_S2255 endif # V4L_USB_DRIVERS -config SOC_CAMERA - tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA - select VIDEOBUF_GEN - help - SoC Camera is a common API to several cameras, not connecting - over a bus like PCI or USB. For example some i2c camera connected - directly to the data bus of an SoC. - -config SOC_CAMERA_MT9M001 - tristate "mt9m001 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9M001_PCA9536_SWITCH - help - This driver supports MT9M001 cameras from Micron, monochrome - and colour models. - -config MT9M001_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9m001" - depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO - help - Select this if your MT9M001 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_MT9V022 - tristate "mt9v022 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9V022_PCA9536_SWITCH - help - This driver supports MT9V022 cameras from Micron - -config MT9V022_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9v022" - depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO - help - Select this if your MT9V022 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing - -config VIDEO_PXA27x - tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && PXA27x - select SOC_CAMERA - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the PXA27x Quick Capture Interface - -config VIDEO_SH_MOBILE_CEU - tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV - select SOC_CAMERA - select VIDEOBUF_DMA_CONTIG - ---help--- - This is a v4l2 driver for the SuperH Mobile CEU Interface - endif # VIDEO_CAPTURE_DRIVERS -- cgit v1.2.3 From 9cf7e31ad91e94574361a556d5d599aca8d565a6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 18:07:35 -0300 Subject: media/video/Kconfig: fix a typo From: Mauro Carvalho Chehab Thanks to Hermann Gausterer for pointing this issue. Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index aeaa54f3e..d6b1a106a 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -630,7 +630,7 @@ config VIDEO_ZORAN_ZR36060 depends on VIDEO_ZORAN help Say Y to support Zoran boards based on 36060 chips. - This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33 + This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 and 33 R10 and AverMedia 6 boards. config VIDEO_ZORAN_BUZ -- cgit v1.2.3