From db4111d427613513def026f2c9d7c749ab44c430 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 16 Sep 2009 11:03:40 -0300
Subject: Remove the legacy LaTex dvb spec sources

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 dvb-spec/dvbapi/examples.tex | 370 -------------------------------------------
 1 file changed, 370 deletions(-)
 delete mode 100644 dvb-spec/dvbapi/examples.tex

(limited to 'dvb-spec/dvbapi/examples.tex')

diff --git a/dvb-spec/dvbapi/examples.tex b/dvb-spec/dvbapi/examples.tex
deleted file mode 100644
index c9a19ba29..000000000
--- a/dvb-spec/dvbapi/examples.tex
+++ /dev/null
@@ -1,370 +0,0 @@
-\chapter{Examples}
-In this section we would like to present some examples for using the DVB API.
-
-Maintainer note: This section is out of date. Please refer to the sample
-programs packaged with the driver distribution from
-\texttt{http://linuxtv.org/}.
-
-\section{Tuning}
-We will start with a generic tuning subroutine that uses the frontend
-and SEC, as well as the demux devices. The example is given for QPSK
-tuners, but can easily be adjusted for QAM.
-
-{\small
-\begin{verbatim}
-#include <sys/ioctl.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <time.h>
-#include <unistd.h>
-
-#include <linux/dvb/dmx.h>
-#include <linux/dvb/frontend.h>
-#include <linux/dvb/sec.h>
-#include <sys/poll.h>
-
-#define DMX "/dev/dvb/adapter0/demux1"
-#define FRONT "/dev/dvb/adapter0/frontend1"
-#define SEC "/dev/dvb/adapter0/sec1"
-
-/* routine for checking if we have a signal and other status information*/
-int FEReadStatus(int fd, fe_status_t *stat)
-{
-        int ans;
-
-        if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){
-                perror("FE READ STATUS: ");
-                return -1;
-        }
-
-        if (*stat & FE_HAS_POWER)
-                printf("FE HAS POWER\n");
-
-        if (*stat & FE_HAS_SIGNAL)
-                printf("FE HAS SIGNAL\n");
-
-        if (*stat & FE_SPECTRUM_INV)
-                printf("SPEKTRUM INV\n");
-
-        return 0;
-}
-
-
-/* tune qpsk */
-/* freq:             frequency of transponder                      */
-/* vpid, apid, tpid: PIDs of video, audio and teletext TS packets  */
-/* diseqc:           DiSEqC address of the used LNB                */
-/* pol:              Polarisation                                  */
-/* srate:            Symbol Rate                                   */
-/* fec.              FEC                                           */
-/* lnb_lof1:         local frequency of lower LNB band             */
-/* lnb_lof2:         local frequency of upper LNB band             */
-/* lnb_slof:         switch frequency of LNB                       */
-
-int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
-                int diseqc, int pol, int srate, int fec, int lnb_lof1, 
-                int lnb_lof2, int lnb_slof)
-{
-        struct secCommand scmd;
-        struct secCmdSequence scmds;
-        struct dmx_pes_filter_params pesFilterParams; 
-        FrontendParameters frp;
-        struct pollfd pfd[1];
-        FrontendEvent event;
-        int demux1, demux2, demux3, front;
-
-        frequency = (uint32_t) freq;
-        symbolrate = (uint32_t) srate;
-
-        if((front = open(FRONT,O_RDWR)) < 0){
-                perror("FRONTEND DEVICE: ");
-                return -1;
-        }
-
-        if((sec = open(SEC,O_RDWR)) < 0){
-                perror("SEC DEVICE: ");
-                return -1;
-        }
-
-        if (demux1 < 0){
-                if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) 
-                    < 0){
-                        perror("DEMUX DEVICE: ");
-                        return -1;
-                }
-        }
-
-        if (demux2 < 0){
-                if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) 
-                    < 0){
-                        perror("DEMUX DEVICE: ");
-                        return -1;
-                }
-        }
-
-        if (demux3 < 0){
-                if ((demux3=open(DMX, O_RDWR|O_NONBLOCK)) 
-                    < 0){
-                        perror("DEMUX DEVICE: ");
-                        return -1;
-                }
-        }
-
-        if (freq < lnb_slof) {
-                frp.Frequency = (freq - lnb_lof1);
-                scmds.continuousTone = SEC_TONE_OFF;
-        } else {
-                frp.Frequency = (freq - lnb_lof2);
-                scmds.continuousTone = SEC_TONE_ON;
-        }
-        frp.Inversion = INVERSION_AUTO;
-        if (pol) scmds.voltage = SEC_VOLTAGE_18;
-        else scmds.voltage = SEC_VOLTAGE_13;
-        
-        scmd.type=0;
-        scmd.u.diseqc.addr=0x10;
-        scmd.u.diseqc.cmd=0x38;
-        scmd.u.diseqc.numParams=1;
-        scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) | 
-                (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
-                (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
-
-        scmds.miniCommand=SEC_MINI_NONE;
-        scmds.numCommands=1;
-        scmds.commands=&scmd;
-        if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
-                perror("SEC SEND: ");
-                return -1;
-        }
-
-        if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
-                perror("SEC SEND: ");
-                return -1;
-        }
-
-        frp.u.qpsk.SymbolRate = srate;
-        frp.u.qpsk.FEC_inner = fec;
-
-        if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){
-                perror("QPSK TUNE: ");
-                return -1;
-        }
- 
-        pfd[0].fd = front;
-        pfd[0].events = POLLIN;
-
-        if (poll(pfd,1,3000)){
-                if (pfd[0].revents & POLLIN){
-                        printf("Getting QPSK event\n");
-                        if ( ioctl(front, FE_GET_EVENT, &event)  
-
-                             == -EOVERFLOW){
-                                perror("qpsk get event");
-                                return -1;
-                        }
-                        printf("Received ");
-                        switch(event.type){
-                        case FE_UNEXPECTED_EV:
-                                printf("unexpected event\n");
-                                return -1;
-                        case FE_FAILURE_EV:
-                                printf("failure event\n");
-                                return -1;
-                                
-                        case FE_COMPLETION_EV:
-                                printf("completion event\n");
-                        }
-                }
-        }
-      
-
-        pesFilterParams.pid     = vpid;
-        pesFilterParams.input   = DMX_IN_FRONTEND; 
-        pesFilterParams.output  = DMX_OUT_DECODER; 
-        pesFilterParams.pes_type = DMX_PES_VIDEO; 
-        pesFilterParams.flags   = DMX_IMMEDIATE_START;
-        if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-                perror("set_vpid");
-                return -1;
-        }
-
-        pesFilterParams.pid     = apid;
-        pesFilterParams.input   = DMX_IN_FRONTEND; 
-        pesFilterParams.output  = DMX_OUT_DECODER; 
-        pesFilterParams.pes_type = DMX_PES_AUDIO; 
-        pesFilterParams.flags   = DMX_IMMEDIATE_START;
-        if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-                perror("set_apid");
-                return -1;
-        }
-
-        pesFilterParams.pid     = tpid;
-        pesFilterParams.input   = DMX_IN_FRONTEND; 
-        pesFilterParams.output  = DMX_OUT_DECODER; 
-        pesFilterParams.pes_type = DMX_PES_TELETEXT; 
-        pesFilterParams.flags   = DMX_IMMEDIATE_START;
-        if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-                perror("set_tpid");
-                return -1;
-        }
-
-        return has_signal(fds);
-}
-
-\end{verbatim}
-}
-The program assumes that you are using a universal LNB and a standard
-DiSEqC switch with up to 4 addresses. Of course, you could build in
-some more checking if tuning was successful and maybe try to repeat
-the tuning process. Depending on the external hardware, i.e. LNB and
-DiSEqC switch, and weather conditions this may be necessary. 
-
-
-\section{The DVR device}
-The following program code shows how to use the DVR device for
-recording.
-
-{\small
-\begin{verbatim}
-#include <sys/ioctl.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <time.h>
-#include <unistd.h>
-
-#include <linux/dvb/dmx.h>
-#include <linux/dvb/video.h>
-#include <sys/poll.h>
-#define DVR "/dev/dvb/adapter0/dvr1"
-#define AUDIO "/dev/dvb/adapter0/audio1"
-#define VIDEO "/dev/dvb/adapter0/video1"
-
-#define BUFFY (188*20)
-#define MAX_LENGTH (1024*1024*5) /* record 5MB */
-
-
-/* switch the demuxes to recording, assuming the transponder is tuned */
-
-/* demux1, demux2: file descriptor of video and audio filters */
-/* vpid, apid:     PIDs of video and audio channels           */
-
-int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
-{
-        struct dmx_pes_filter_params pesFilterParams; 
-
-        if (demux1 < 0){
-                if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) 
-                    < 0){
-                        perror("DEMUX DEVICE: ");
-                        return -1;
-                }
-        }
-
-        if (demux2 < 0){
-                if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) 
-                    < 0){
-                        perror("DEMUX DEVICE: ");
-                        return -1;
-                }
-        }
-
-        pesFilterParams.pid = vpid;
-        pesFilterParams.input = DMX_IN_FRONTEND; 
-        pesFilterParams.output = DMX_OUT_TS_TAP; 
-        pesFilterParams.pes_type = DMX_PES_VIDEO; 
-        pesFilterParams.flags = DMX_IMMEDIATE_START;
-        if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-                perror("DEMUX DEVICE");
-                return -1; 
-        }
-        pesFilterParams.pid = apid; 
-        pesFilterParams.input = DMX_IN_FRONTEND; 
-        pesFilterParams.output = DMX_OUT_TS_TAP; 
-        pesFilterParams.pes_type = DMX_PES_AUDIO; 
-        pesFilterParams.flags = DMX_IMMEDIATE_START;
-        if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-                perror("DEMUX DEVICE");
-                return -1; 
-        }
-        return 0;
-}
-
-/* start recording MAX_LENGTH , assuming the transponder is tuned */
-
-/* demux1, demux2: file descriptor of video and audio filters */
-/* vpid, apid:     PIDs of video and audio channels           */
-int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
-{
-        int i;
-        int len;
-        int written;
-        uint8_t buf[BUFFY];
-        uint64_t length;
-        struct pollfd pfd[1];
-        int dvr, dvr_out;
-
-        /* open dvr device */
-        if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){
-                        perror("DVR DEVICE");
-                        return -1;
-        }
-        
-        /* switch video and audio demuxes to dvr */
-        printf ("Switching dvr on\n");
-        i = switch_to_record(demux1, demux2, vpid, apid);
-        printf("finished: ");
-        
-        printf("Recording %2.0f MB of test file in TS format\n",
-               MAX_LENGTH/(1024.0*1024.0));
-        length = 0;
-
-        /* open output file */
-        if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
-                                 |O_TRUNC, S_IRUSR|S_IWUSR
-                                 |S_IRGRP|S_IWGRP|S_IROTH|
-                                 S_IWOTH)) < 0){
-                perror("Can't open file for dvr test");
-                return -1;
-        }
-
-        pfd[0].fd = dvr;
-        pfd[0].events = POLLIN;
-
-        /* poll for dvr data and write to file */
-        while (length < MAX_LENGTH ) {
-                if (poll(pfd,1,1)){
-                        if (pfd[0].revents & POLLIN){
-                                len = read(dvr, buf, BUFFY);
-                                if (len < 0){
-                                        perror("recording");
-                                        return -1;
-                                }
-                                if (len > 0){
-                                        written = 0;
-                                        while (written < len) 
-                                                written += 
-                                                        write (dvr_out, 
-                                                               buf, len);
-                                        length += len;
-                                        printf("written %2.0f MB\r",
-                                               length/1024./1024.);
-                                }
-                        }
-                }
-        }
-        return 0;
-}
-
-\end{verbatim}
-}
-%%% Local Variables: 
-%%% mode: latex
-%%% TeX-master: "dvbapi"
-%%% TeX-master: t
-%%% End: 
-- 
cgit v1.2.3