From 8b87b848ca8a5e6465888220e57ec3e59104d677 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 11 Jun 2009 15:31:22 -0700 Subject: b2c2: fix frontends compiled into kernel From: Trent Piepho A recent patch didn't take into account that frontends can be compiled into the kernel. Or that frontends compiled as modules can't be used by the b2c2 driver if it is not a module itself. Some frontends require multiple drivers, e.g. a demod driver and a tuner driver. The code for the frontend support was getting added if the demod driver was available. Change this to also require any needed tuner or SEC drivers as well. Priority: normal Signed-off-by: Trent Piepho --- linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 67 ++++++++++++++----------- 1 file changed, 37 insertions(+), 30 deletions(-) (limited to 'linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c') diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index efb4a6c2b..9a6307a34 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -20,8 +20,14 @@ #include "tuner-simple.h" #include "stv0297.h" + +/* Can we use the specified front-end? Remember that if we are compiled + * into the kernel we can't call code that's in modules. */ +#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \ + (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE))) + /* lnb control */ -#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) +#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299) static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct flexcop_device *fc = fe->dvb->priv; @@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage } #endif -#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \ - || defined(CONFIG_DVB_MT312_MODULE) +#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312) static int flexcop_sleep(struct dvb_frontend* fe) { struct flexcop_device *fc = fe->dvb->priv; @@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe) #endif /* SkyStar2 DVB-S rev 2.3 */ -#if defined(CONFIG_DVB_MT312_MODULE) +#if FE_SUPPORTED(MT312) static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ @@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc, } return 0; } +#else +#define skystar2_rev23_attach NULL #endif /* SkyStar2 DVB-S rev 2.6 */ -#if defined(CONFIG_DVB_STV0299_MODULE) +#if FE_SUPPORTED(STV0299) static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) { @@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc, } return 0; } +#else +#define skystar2_rev26_attach NULL #endif /* SkyStar2 DVB-S rev 2.7 */ -#if defined(CONFIG_DVB_S5H1420_MODULE) +#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000) static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { .demod_address = 0x53, .invert = 1, @@ -385,10 +394,12 @@ fail: fc->fc_i2c_adap[0].no_base_addr = 0; return 0; } +#else +#define skystar2_rev27_attach NULL #endif /* SkyStar2 rev 2.8 */ -#if defined(CONFIG_DVB_CX24123_MODULE) +#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113) static struct cx24123_config skystar2_rev2_8_cx24123_config = { .demod_address = 0x55, .dont_use_pll = 1, @@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc, * IR-receiver (PIC16F818) - but the card has no input for that ??? */ return 1; } +#else +#define skystar2_rev28_attach NULL #endif /* AirStar DVB-T */ -#if defined(CONFIG_DVB_MT352_MODULE) +#if FE_SUPPORTED(MT352) static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) { static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; @@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc, } return 0; } +#else +#define airstar_dvbt_attach NULL #endif /* AirStar ATSC 1st generation */ -#if defined(CONFIG_DVB_BCM3510_MODULE) +#if FE_SUPPORTED(BCM3510) static int flexcop_fe_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char* name) { @@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc, fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); return fc->fe != NULL; } +#else +#define airstar_atsc1_attach NULL #endif /* AirStar ATSC 2nd generation */ -#if defined(CONFIG_DVB_NXT200X_MODULE) +#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL) static struct nxt200x_config samsung_tbmv_config = { .demod_address = 0x0a, }; @@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc, return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); } +#else +#define airstar_atsc2_attach NULL #endif /* AirStar ATSC 3rd generation */ -#if defined(CONFIG_DVB_LGDT330X_MODULE) +#if FE_SUPPORTED(LGDT330X) static struct lgdt330x_config air2pc_atsc_hd5000_config = { .demod_address = 0x59, .demod_chip = LGDT3303, @@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc, return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, TUNER_LG_TDVS_H06XF); } +#else +#define airstar_atsc3_attach NULL #endif /* CableStar2 DVB-C */ -#if defined(CONFIG_DVB_STV0297_MODULE) +#if FE_SUPPORTED(STV0297) static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { @@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc, fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; return 1; } +#else +#define cablestar2_attach NULL #endif static struct { flexcop_device_type_t type; int (*attach)(struct flexcop_device *, struct i2c_adapter *); } flexcop_frontends[] = { -#if defined(CONFIG_DVB_S5H1420_MODULE) { FC_SKY_REV27, skystar2_rev27_attach }, -#endif -#if defined(CONFIG_DVB_CX24123_MODULE) { FC_SKY_REV28, skystar2_rev28_attach }, -#endif -#if defined(CONFIG_DVB_STV0299_MODULE) { FC_SKY_REV26, skystar2_rev26_attach }, -#endif -#if defined(CONFIG_DVB_MT352_MODULE) { FC_AIR_DVBT, airstar_dvbt_attach }, -#endif -#if defined(CONFIG_DVB_NXT200X_MODULE) { FC_AIR_ATSC2, airstar_atsc2_attach }, -#endif -#if defined(CONFIG_DVB_LGDT330X_MODULE) { FC_AIR_ATSC3, airstar_atsc3_attach }, -#endif -#if defined(CONFIG_DVB_BCM3510_MODULE) { FC_AIR_ATSC1, airstar_atsc1_attach }, -#endif -#if defined(CONFIG_DVB_STV0297_MODULE) { FC_CABLE, cablestar2_attach }, -#endif -#if defined(CONFIG_DVB_MT312_MODULE) { FC_SKY_REV23, skystar2_rev23_attach }, -#endif }; /* try to figure out the frontend */ @@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc) { int i; for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { + if (!flexcop_frontends[i].attach) + continue; /* type needs to be set before, because of some workarounds * done based on the probed card type */ fc->dev_type = flexcop_frontends[i].type; -- cgit v1.2.3 From 8ec3691caa62885c1f9f47b05f580ac47b5db528 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 11 Jun 2009 15:31:22 -0700 Subject: b2c2: Use dvb-pll for AirStar DVB-T's tuner From: Trent Piepho The code in samsung_tdtc9251dh0_calc_regs() is equivalent to what dvb-pll's code does. Priority: normal Signed-off-by: Trent Piepho --- linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 38 ++++--------------------- 1 file changed, 6 insertions(+), 32 deletions(-) (limited to 'linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c') diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 9a6307a34..0669a14da 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -449,7 +449,7 @@ static int skystar2_rev28_attach(struct flexcop_device *fc, #endif /* AirStar DVB-T */ -#if FE_SUPPORTED(MT352) +#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL) static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) { static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; @@ -467,32 +467,6 @@ static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) return 0; } -static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) -{ - u32 div; - unsigned char bs = 0; - - if (buf_len < 5) - return -EINVAL; - -#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ - div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; - if (params->frequency >= 48000000 && params->frequency <= 154000000) \ - bs = 0x09; - if (params->frequency >= 161000000 && params->frequency <= 439000000) \ - bs = 0x0a; - if (params->frequency >= 447000000 && params->frequency <= 863000000) \ - bs = 0x08; - - pllbuf[0] = 0x61; - pllbuf[1] = div >> 8; - pllbuf[2] = div & 0xff; - pllbuf[3] = 0xcc; - pllbuf[4] = bs; - return 5; -} - static struct mt352_config samsung_tdtc9251dh0_config = { .demod_address = 0x0f, .demod_init = samsung_tdtc9251dh0_demod_init, @@ -502,11 +476,11 @@ static int airstar_dvbt_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); - if (fc->fe != NULL) { - fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; - return 1; - } - return 0; + if (!fc->fe) + return 0; + + return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, + DVB_PLL_SAMSUNG_TDTC9251DH0); } #else #define airstar_dvbt_attach NULL -- cgit v1.2.3 From a33131bc8be60a05f9abfa4bc0ce81b30a2af7e8 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 11 Jun 2009 15:31:22 -0700 Subject: b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6 From: Trent Piepho The code in skystar23_samsung_tbdu18132_tuner_set_params() and samsung_tbmu24112_tuner_set_params() is equivalent to what the dvb-pll code does. There could be an issue because the dvb-pll code will probe to check for the tuner, while the previous code didn't do any checks. Priority: normal Signed-off-by: Trent Piepho --- linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 105 +++++++----------------- 1 file changed, 31 insertions(+), 74 deletions(-) (limited to 'linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c') diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 0669a14da..928bc4d4d 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -66,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe) #endif /* SkyStar2 DVB-S rev 2.3 */ -#if FE_SUPPORTED(MT312) +#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL) static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ @@ -155,55 +155,34 @@ static struct mt312_config skystar23_samsung_tbdu18132_config = { .demod_address = 0x0e, }; -static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, - .len = sizeof(buf) }; - struct flexcop_device *fc = fe->dvb->priv; - div = (params->frequency + (125/2)) / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - buf[2] = 0x84 | ((div >> 10) & 0x60); - buf[3] = 0x80; - - if (params->frequency < 1550000) - buf[3] |= 0x02; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} - static int skystar2_rev23_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { + struct dvb_frontend_ops *ops; + fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); - if (fc->fe != NULL) { - struct dvb_frontend_ops *ops = &fc->fe->ops; - ops->tuner_ops.set_params = - skystar23_samsung_tbdu18132_tuner_set_params; - ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; - ops->diseqc_send_burst = flexcop_diseqc_send_burst; - ops->set_tone = flexcop_set_tone; - ops->set_voltage = flexcop_set_voltage; - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - return 1; - } - return 0; + if (!fc->fe) + return 0; + + if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, + DVB_PLL_SAMSUNG_TBDU18132)) + return 0; + + ops = &fc->fe->ops; + ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + ops->diseqc_send_burst = flexcop_diseqc_send_burst; + ops->set_tone = flexcop_set_tone; + ops->set_voltage = flexcop_set_voltage; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + return 1; } #else #define skystar2_rev23_attach NULL #endif /* SkyStar2 DVB-S rev 2.6 */ -#if FE_SUPPORTED(STV0299) +#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL) static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) { @@ -232,31 +211,6 @@ static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, return 0; } -static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { - .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct flexcop_device *fc = fe->dvb->priv; - div = params->frequency / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x84; /* 0xC4 */ - buf[3] = 0x08; - - if (params->frequency < 1500000) - buf[3] |= 0x10; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} - static u8 samsung_tbmu24112_inittab[] = { 0x01, 0x15, 0x02, 0x30, @@ -318,15 +272,18 @@ static int skystar2_rev26_attach(struct flexcop_device *fc, struct i2c_adapter *i2c) { fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); - if (fc->fe != NULL) { - struct dvb_frontend_ops *ops = &fc->fe->ops; - ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; - ops->set_voltage = flexcop_set_voltage; - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - return 1; - } - return 0; + if (!fc->fe) + return 0; + + if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, + DVB_PLL_SAMSUNG_TBMU24112)) + return 0; + + fc->fe->ops.set_voltage = flexcop_set_voltage; + fc->fe_sleep = fc->fe->ops.sleep; + fc->fe->ops.sleep = flexcop_sleep; + return 1; + } #else #define skystar2_rev26_attach NULL -- cgit v1.2.3 From d6ff0d4097028addee38d92dff142e1e28259275 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 11 Jun 2009 15:31:22 -0700 Subject: b2c2: Use dvb-pll for Cablestar2 From: Trent Piepho The dvb-pll code should do the same thing that alps_tdee4_stv0297_tuner_set_params() was doing. Except the dvb-pll code will check for tuner presence when attaching, while the old code didn't. This tuner appears to not be behind the stv0297's I2C gate but is instead on a different I2C adapter provided by the flexcop chip. The old code would turn the I2C gate off each time the tuner was used. I've changed it to turn the gate off when the tuner is attached and then disable the gate control function. This should result in the gate staying off, which should be even better. Priority: normal Signed-off-by: Trent Piepho --- linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 73 +++++++------------------ 1 file changed, 19 insertions(+), 54 deletions(-) (limited to 'linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c') diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 928bc4d4d..f56ffc0e2 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -511,54 +511,7 @@ static int airstar_atsc3_attach(struct flexcop_device *fc, #endif /* CableStar2 DVB-C */ -#if FE_SUPPORTED(STV0297) -static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, - struct dvb_frontend_parameters *fep) -{ - struct flexcop_device *fc = fe->dvb->priv; - u8 buf[4]; - u16 div; - int ret; - -/* 62.5 kHz * 10 */ -#define REF_FREQ 625 -#define FREQ_OFFSET 36125 - - div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ; -/* 4 MHz = 4000 KHz */ - - buf[0] = (u8)( div >> 8) & 0x7f; - buf[1] = (u8) div & 0xff; - -/* F(osc) = N * Reference Freq. (62.5 kHz) - * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8 - * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0 - * byte 4 : 1 * * AGD R3 R2 R1 R0 - * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1 - * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */ - buf[2] = 0x95; - -/* Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 - * 47 - 153 0 * 0 0 0 0 0 1 0x01 - * 153 - 430 0 * 0 0 0 0 1 0 0x02 - * 430 - 822 0 * 0 0 1 0 0 0 0x08 - * 822 - 862 1 * 0 0 1 0 0 0 0x88 */ - - if (fep->frequency <= 153000000) buf[3] = 0x01; - else if (fep->frequency <= 430000000) buf[3] = 0x02; - else if (fep->frequency <= 822000000) buf[3] = 0x08; - else buf[3] = 0x88; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency, - buf[0], buf[1], buf[2], buf[3]); - ret = fc->i2c_request(&fc->fc_i2c_adap[2], - FC_WRITE, 0x61, buf[0], &buf[1], 3); - deb_tuner("tuner write returned: %d\n",ret); - return ret; -} - +#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL) static u8 alps_tdee4_stv0297_inittab[] = { 0x80, 0x01, 0x80, 0x00, @@ -642,13 +595,25 @@ static int cablestar2_attach(struct flexcop_device *fc, { fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); - if (!fc->fe) { - /* Reset for next frontend to try */ - fc->fc_i2c_adap[0].no_base_addr = 0; - return 0; - } - fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; + if (!fc->fe) + goto fail; + + /* This tuner doesn't use the stv0297's I2C gate, but instead the + * tuner is connected to a different flexcop I2C adapter. */ + if (fc->fe->ops.i2c_gate_ctrl) + fc->fe->ops.i2c_gate_ctrl(fc->fe, 0); + fc->fe->ops.i2c_gate_ctrl = NULL; + + if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, + fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4)) + goto fail; + return 1; + +fail: + /* Reset for next frontend to try */ + fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; } #else #define cablestar2_attach NULL -- cgit v1.2.3