From 621552763701b6f26fb764e243c7338126c8a5c2 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 8 Apr 2008 19:20:00 -0400 Subject: media/dvb/dvb-usb replace remaining __FUNCTION__ occurrences From: Harvey Harrison __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Michael Krufky --- linux/drivers/media/dvb/dvb-usb/cxusb.c | 6 +++--- linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c | 4 ++-- linux/drivers/media/dvb/dvb-usb/m920x.c | 12 ++++++------ linux/drivers/media/dvb/dvb-usb/vp702x-fe.c | 18 +++++++++--------- 4 files changed, 20 insertions(+), 20 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c index 84d8a915d..c9ef72216 100644 --- a/linux/drivers/media/dvb/dvb-usb/cxusb.c +++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c @@ -492,14 +492,14 @@ static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) switch (command) { case XC2028_TUNER_RESET: - deb_info("%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg); + deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg); cxusb_bluebird_gpio_pulse(d, 0x01, 1); break; case XC2028_RESET_CLK: - deb_info("%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg); + deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); break; default: - deb_info("%s: unknown command %d, arg %d\n", __FUNCTION__, + deb_info("%s: unknown command %d, arg %d\n", __func__, command, arg); return -EINVAL; } diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c index e37142d92..262a858c3 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -152,7 +152,7 @@ static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, { struct gp8psk_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, m->msg, m->msg_len)) { @@ -167,7 +167,7 @@ static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe, struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); /* These commands are certainly wrong */ cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c index 503598127..0d93ff306 100644 --- a/linux/drivers/media/dvb/dvb-usb/m920x.c +++ b/linux/drivers/media/dvb/dvb-usb/m920x.c @@ -477,7 +477,7 @@ static struct qt1010_config m920x_qt1010_config = { /* Callbacks for DVB USB */ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(mt352_attach, &m920x_mt352_config, @@ -489,7 +489,7 @@ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(tda10046_attach, &m920x_tda10046_08_config, @@ -501,7 +501,7 @@ static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if ((adap->fe = dvb_attach(tda10046_attach, &m920x_tda10046_0b_config, @@ -513,7 +513,7 @@ static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL) return -ENODEV; @@ -523,7 +523,7 @@ static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL) return -ENODEV; @@ -533,7 +533,7 @@ static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap) { - deb("%s\n",__FUNCTION__); + deb("%s\n",__func__); if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) return -ENODEV; diff --git a/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c b/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c index c3fdc7cd0..ccc7e4452 100644 --- a/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c +++ b/linux/drivers/media/dvb/dvb-usb/vp702x-fe.c @@ -67,7 +67,7 @@ static int vp702x_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) { struct vp702x_fe_state *st = fe->demodulator_priv; vp702x_fe_refresh_state(st); - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (st->lock == 0) *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; @@ -121,7 +121,7 @@ static int vp702x_fe_read_snr(struct dvb_frontend* fe, u16 *snr) static int vp702x_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); tune->min_delay_ms = 2000; return 0; } @@ -183,21 +183,21 @@ static int vp702x_fe_set_frontend(struct dvb_frontend* fe, static int vp702x_fe_init(struct dvb_frontend *fe) { struct vp702x_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); vp702x_usb_in_op(st->d, RESET_TUNER, 0, 0, NULL, 0); return 0; } static int vp702x_fe_sleep(struct dvb_frontend *fe) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } static int vp702x_fe_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } @@ -208,7 +208,7 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, u8 cmd[8],ibuf[10]; memset(cmd,0,8); - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); if (m->msg_len > 4) return -EINVAL; @@ -230,7 +230,7 @@ static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); return 0; } @@ -238,7 +238,7 @@ static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { struct vp702x_fe_state *st = fe->demodulator_priv; u8 ibuf[10]; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); st->tone_mode = tone; @@ -263,7 +263,7 @@ static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t { struct vp702x_fe_state *st = fe->demodulator_priv; u8 ibuf[10]; - deb_fe("%s\n",__FUNCTION__); + deb_fe("%s\n",__func__); st->voltage = voltage; -- cgit v1.2.3 From 6085c418e42063695cf895d7af008edc36f3fde2 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 9 Apr 2008 21:13:13 +0200 Subject: Adds selectable adapter numbers as per module option From: Janne Grunau The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau Acked-by: Hermann Pitton Signed-off-by: Michael Krufky --- linux/drivers/media/dvb/dvb-usb/a800.c | 6 ++++- linux/drivers/media/dvb/dvb-usb/af9005.c | 5 +++- linux/drivers/media/dvb/dvb-usb/au6610.c | 6 ++++- linux/drivers/media/dvb/dvb-usb/cxusb.c | 29 ++++++++++++++++-------- linux/drivers/media/dvb/dvb-usb/dib0700_core.c | 5 +++- linux/drivers/media/dvb/dvb-usb/dibusb-mb.c | 14 ++++++++---- linux/drivers/media/dvb/dvb-usb/dibusb-mc.c | 5 +++- linux/drivers/media/dvb/dvb-usb/digitv.c | 8 +++++-- linux/drivers/media/dvb/dvb-usb/dtt200u.c | 17 ++++++++++---- linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h | 3 ++- linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c | 9 ++++---- linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c | 16 +++++++------ linux/drivers/media/dvb/dvb-usb/dvb-usb.h | 5 +++- linux/drivers/media/dvb/dvb-usb/gl861.c | 6 ++++- linux/drivers/media/dvb/dvb-usb/gp8psk.c | 5 +++- linux/drivers/media/dvb/dvb-usb/m920x.c | 22 +++++++++++------- linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c | 5 +++- linux/drivers/media/dvb/dvb-usb/opera1.c | 6 ++++- linux/drivers/media/dvb/dvb-usb/ttusb2.c | 8 +++++-- linux/drivers/media/dvb/dvb-usb/umt-010.c | 5 +++- linux/drivers/media/dvb/dvb-usb/vp702x.c | 5 +++- linux/drivers/media/dvb/dvb-usb/vp7045.c | 6 ++++- 22 files changed, 141 insertions(+), 55 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/a800.c b/linux/drivers/media/dvb/dvb-usb/a800.c index 16df0a3f9..de7194ee7 100644 --- a/linux/drivers/media/dvb/dvb-usb/a800.c +++ b/linux/drivers/media/dvb/dvb-usb/a800.c @@ -18,6 +18,9 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(debug,0x01,args) static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -94,7 +97,8 @@ static struct dvb_usb_device_properties a800_properties; static int a800_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&a800_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &a800_properties, + THIS_MODULE, NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/linux/drivers/media/dvb/dvb-usb/af9005.c b/linux/drivers/media/dvb/dvb-usb/af9005.c index 042bccd0e..04270dd3d 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9005.c +++ b/linux/drivers/media/dvb/dvb-usb/af9005.c @@ -39,6 +39,8 @@ int dvb_usb_af9005_dump_eeprom = 0; module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* remote control decoder */ int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event, int *state); @@ -1020,7 +1022,8 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &af9005_properties, THIS_MODULE, NULL); + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id af9005_usb_table[] = { diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index 4800a5004..578a27d14 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -19,6 +19,8 @@ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { @@ -163,7 +165,9 @@ static int au6610_probe(struct usb_interface *intf, if (intf->num_altsetting < AU6610_ALTSETTING_COUNT) return -ENODEV; - if ((ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); if (alt == NULL) { diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c index c9ef72216..8017f1e8a 100644 --- a/linux/drivers/media/dvb/dvb-usb/cxusb.c +++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c @@ -40,6 +40,9 @@ static int dvb_usb_cxusb_debug; module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_info(args...) dprintk(dvb_usb_cxusb_debug,0x01,args) #define deb_i2c(args...) if (d->udev->descriptor.idVendor == USB_VID_MEDION) \ dprintk(dvb_usb_cxusb_debug,0x01,args) @@ -723,16 +726,24 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dee1601_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_lgz201_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dtt7579_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_dualdig4_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_nano2_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&cxusb_bluebird_nano2_needsfirmware_properties,THIS_MODULE,NULL) == 0) { + if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_nano2_needsfirmware_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; - } return -EINVAL; } diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c index 9d3217983..a2162fda5 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -17,6 +17,8 @@ int dvb_usb_dib0700_ir_proto = 1; module_param(dvb_usb_dib0700_ir_proto, int, 0644); MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6)."); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { @@ -289,7 +291,8 @@ static int dib0700_probe(struct usb_interface *intf, #endif for (i = 0; i < dib0700_device_count; i++) - if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, &dev) == 0) + if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, + &dev, adapter_nr) == 0) { dib0700_rc_setup(dev); return 0; diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c b/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c index 0d0edece8..2ac86685d 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -14,6 +14,8 @@ */ #include "dibusb.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { struct dvb_usb_adapter *adap = fe->dvb->priv; @@ -107,10 +109,14 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties; static int dibusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&dibusb1_1_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb1_1_an2235_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&artec_t1_usb2_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c b/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c index 8fa2b6908..b1658ac6b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -14,13 +14,16 @@ */ #include "dibusb.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* USB Driver stuff */ static struct dvb_usb_device_properties dibusb_mc_properties; static int dibusb_mc_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&dibusb_mc_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &dibusb_mc_properties, THIS_MODULE, + NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/linux/drivers/media/dvb/dvb-usb/digitv.c b/linux/drivers/media/dvb/dvb-usb/digitv.c index 382ffaa1e..1394b3e6b 100644 --- a/linux/drivers/media/dvb/dvb-usb/digitv.c +++ b/linux/drivers/media/dvb/dvb-usb/digitv.c @@ -20,6 +20,9 @@ static int dvb_usb_digitv_debug; module_param_named(debug,dvb_usb_digitv_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) static int digitv_ctrl_msg(struct dvb_usb_device *d, @@ -256,8 +259,9 @@ static int digitv_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct dvb_usb_device *d; - int ret; - if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) { + int ret = dvb_usb_device_init(intf, &digitv_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { u8 b[4] = { 0 }; if (d != NULL) { /* do that only when the firmware is loaded */ diff --git a/linux/drivers/media/dvb/dvb-usb/dtt200u.c b/linux/drivers/media/dvb/dvb-usb/dtt200u.c index 24ccd5a4d..5fcae7925 100644 --- a/linux/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/linux/drivers/media/dvb/dvb-usb/dtt200u.c @@ -18,6 +18,8 @@ int dvb_usb_dtt200u_debug; module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { u8 b = SET_INIT; @@ -101,11 +103,16 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_fc_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_zl0353_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_miglia_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &dtt200u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -ENODEV; diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h index 35ab68f6d..6b7b2a892 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-common.h @@ -40,7 +40,8 @@ extern int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap); extern int dvb_usb_i2c_init(struct dvb_usb_device *); extern int dvb_usb_i2c_exit(struct dvb_usb_device *); -extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap); +extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, + short *adapter_nums); extern int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap); extern int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap); extern int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap); diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c index 4561a672d..ce8cd0c5d 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -77,12 +77,13 @@ static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) return dvb_usb_ctrl_feed(dvbdmxfeed,0); } -int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap) +int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) { - int ret; + int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, + adap->dev->owner, &adap->dev->udev->dev, + adapter_nums); - if ((ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, - adap->dev->owner, &adap->dev->udev->dev)) < 0) { + if (ret < 0) { deb_info("dvb_register_adapter failed: error %d", ret); goto err; } diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c index cdd717c3f..e331db8c7 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -26,7 +26,7 @@ static int dvb_usb_force_pid_filter_usage; module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); -static int dvb_usb_adapter_init(struct dvb_usb_device *d) +static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) { struct dvb_usb_adapter *adap; int ret,n; @@ -72,7 +72,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d) } if ((ret = dvb_usb_adapter_stream_init(adap)) || - (ret = dvb_usb_adapter_dvb_init(adap)) || + (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || (ret = dvb_usb_adapter_frontend_init(adap))) { return ret; } @@ -122,7 +122,7 @@ static int dvb_usb_exit(struct dvb_usb_device *d) return 0; } -static int dvb_usb_init(struct dvb_usb_device *d) +static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) { int ret = 0; @@ -143,7 +143,7 @@ static int dvb_usb_init(struct dvb_usb_device *d) dvb_usb_device_power_ctrl(d, 1); if ((ret = dvb_usb_i2c_init(d)) || - (ret = dvb_usb_adapter_init(d))) { + (ret = dvb_usb_adapter_init(d, adapter_nums))) { dvb_usb_exit(d); return ret; } @@ -213,8 +213,10 @@ int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) /* * USB */ -int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_properties - *props, struct module *owner,struct dvb_usb_device **du) +int dvb_usb_device_init(struct usb_interface *intf, + struct dvb_usb_device_properties *props, + struct module *owner, struct dvb_usb_device **du, + short *adapter_nums) { struct usb_device *udev = interface_to_usbdev(intf); struct dvb_usb_device *d = NULL; @@ -254,7 +256,7 @@ int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_proper if (du != NULL) *du = d; - ret = dvb_usb_init(d); + ret = dvb_usb_init(d, adapter_nums); if (ret == 0) info("%s successfully initialized and connected.",desc->name); diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb.h index cc5d432bc..f8528bf74 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -387,7 +387,10 @@ struct dvb_usb_device { void *priv; }; -extern int dvb_usb_device_init(struct usb_interface *, struct dvb_usb_device_properties *, struct module *, struct dvb_usb_device **); +extern int dvb_usb_device_init(struct usb_interface *, + struct dvb_usb_device_properties *, + struct module *, struct dvb_usb_device **, + short *adapter_nums); extern void dvb_usb_device_exit(struct usb_interface *); /* the generic read/write method for device control */ diff --git a/linux/drivers/media/dvb/dvb-usb/gl861.c b/linux/drivers/media/dvb/dvb-usb/gl861.c index 8f26ede0c..cc90a3054 100644 --- a/linux/drivers/media/dvb/dvb-usb/gl861.c +++ b/linux/drivers/media/dvb/dvb-usb/gl861.c @@ -16,6 +16,8 @@ static int dvb_usb_gl861_debug; module_param_named(debug,dvb_usb_gl861_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { @@ -140,7 +142,9 @@ static int gl861_probe(struct usb_interface *intf, if (intf->num_altsetting < 2) return -ENODEV; - if ((ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { alt = usb_altnum_to_altsetting(intf, 0); if (alt == NULL) { diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index 54ecee36d..cc99e1cab 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -22,6 +22,8 @@ int dvb_usb_gp8psk_debug; module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { int ret = 0,try = 0; @@ -208,7 +210,8 @@ static int gp8psk_usb_probe(struct usb_interface *intf, { int ret; struct usb_device *udev = interface_to_usbdev(intf); - ret = dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); + ret = dvb_usb_device_init(intf, &gp8psk_properties, + THIS_MODULE, NULL, adapter_nr); if (ret == 0) { info("found Genpix USB device pID = %x (hex)", le16_to_cpu(udev->descriptor.idProduct)); diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c index 0d93ff306..7597c4b78 100644 --- a/linux/drivers/media/dvb/dvb-usb/m920x.c +++ b/linux/drivers/media/dvb/dvb-usb/m920x.c @@ -22,6 +22,8 @@ static int dvb_usb_m920x_debug; module_param_named(debug,dvb_usb_m920x_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid); static inline int m920x_read(struct usb_device *udev, u8 request, u16 value, @@ -618,27 +620,31 @@ static int m920x_probe(struct usb_interface *intf, * multi-tuner device */ - if ((ret = dvb_usb_device_init(intf, &megasky_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &megasky_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { rc_init_seq = megasky_rc_init; goto found; } - if ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { /* No remote control, so no rc_init_seq */ goto found; } /* This configures both tuners on the TV Walker Twin */ - if ((ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { rc_init_seq = tvwalkertwin_rc_init; goto found; } - if ((ret = dvb_usb_device_init(intf, &dposh_properties, - THIS_MODULE, &d)) == 0) { + ret = dvb_usb_device_init(intf, &dposh_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { /* Remote controller not supported yet. */ goto found; } diff --git a/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c index f0aadc8a2..a346040ca 100644 --- a/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ b/linux/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -15,6 +15,8 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_rc(args...) dprintk(debug,0x01,args) #define deb_ee(args...) dprintk(debug,0x02,args) @@ -142,7 +144,8 @@ static struct dvb_usb_device_properties nova_t_properties; static int nova_t_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&nova_t_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &nova_t_properties, + THIS_MODULE, NULL, adapter_nr); } /* do not change the order of the ID table */ diff --git a/linux/drivers/media/dvb/dvb-usb/opera1.c b/linux/drivers/media/dvb/dvb-usb/opera1.c index 78f55fd69..1cb2a5e90 100644 --- a/linux/drivers/media/dvb/dvb-usb/opera1.c +++ b/linux/drivers/media/dvb/dvb-usb/opera1.c @@ -45,6 +45,9 @@ module_param_named(debug, dvb_usb_opera1_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #if 0 struct mutex mymutex; #endif @@ -559,7 +562,8 @@ static int opera1_probe(struct usb_interface *intf, return -EINVAL; } - if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, NULL) != 0) + if (0 != dvb_usb_device_init(intf, &opera1_properties, + THIS_MODULE, NULL, adapter_nr)) return -EINVAL; return 0; } diff --git a/linux/drivers/media/dvb/dvb-usb/ttusb2.c b/linux/drivers/media/dvb/dvb-usb/ttusb2.c index 572760414..dd11a1fee 100644 --- a/linux/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/linux/drivers/media/dvb/dvb-usb/ttusb2.c @@ -37,6 +37,8 @@ static int dvb_usb_ttusb2_debug; module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct ttusb2_state { u8 id; }; @@ -187,8 +189,10 @@ static struct dvb_usb_device_properties ttusb2_properties_s2400; static int ttusb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf, &ttusb2_properties, THIS_MODULE, NULL) == 0 || - dvb_usb_device_init(intf, &ttusb2_properties_s2400, THIS_MODULE, NULL) == 0) + if (0 == dvb_usb_device_init(intf, &ttusb2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, + THIS_MODULE, NULL, adapter_nr)) return 0; return -ENODEV; } diff --git a/linux/drivers/media/dvb/dvb-usb/umt-010.c b/linux/drivers/media/dvb/dvb-usb/umt-010.c index f0aff4b0d..ca850d266 100644 --- a/linux/drivers/media/dvb/dvb-usb/umt-010.c +++ b/linux/drivers/media/dvb/dvb-usb/umt-010.c @@ -13,6 +13,8 @@ #include "mt352.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static int umt_mt352_demod_init(struct dvb_frontend *fe) { static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; @@ -75,7 +77,8 @@ static struct dvb_usb_device_properties umt_properties; static int umt_probe(struct usb_interface *intf, const struct usb_device_id *id) { - if (dvb_usb_device_init(intf,&umt_properties,THIS_MODULE,NULL) == 0) + if (0 == dvb_usb_device_init(intf, &umt_properties, + THIS_MODULE, NULL, adapter_nr)) return 0; return -EINVAL; } diff --git a/linux/drivers/media/dvb/dvb-usb/vp702x.c b/linux/drivers/media/dvb/dvb-usb/vp702x.c index 28b7011f2..9d286d430 100644 --- a/linux/drivers/media/dvb/dvb-usb/vp702x.c +++ b/linux/drivers/media/dvb/dvb-usb/vp702x.c @@ -21,6 +21,8 @@ int dvb_usb_vp702x_debug; module_param_named(debug,dvb_usb_vp702x_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct vp702x_state { int pid_filter_count; int pid_filter_can_bypass; @@ -285,7 +287,8 @@ static struct dvb_usb_device_properties vp702x_properties; static int vp702x_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&vp702x_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &vp702x_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp702x_usb_table [] = { diff --git a/linux/drivers/media/dvb/dvb-usb/vp7045.c b/linux/drivers/media/dvb/dvb-usb/vp7045.c index 9d244e603..b45498911 100644 --- a/linux/drivers/media/dvb/dvb-usb/vp7045.c +++ b/linux/drivers/media/dvb/dvb-usb/vp7045.c @@ -18,6 +18,9 @@ static int dvb_usb_vp7045_debug; module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) @@ -227,7 +230,8 @@ static struct dvb_usb_device_properties vp7045_properties; static int vp7045_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&vp7045_properties,THIS_MODULE,NULL); + return dvb_usb_device_init(intf, &vp7045_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp7045_usb_table [] = { -- cgit v1.2.3 From 300d332d50fea15849aa641486728d160708b9cf Mon Sep 17 00:00:00 2001 From: Hartmut Hackmann Date: Thu, 10 Apr 2008 01:07:11 +0200 Subject: tda10086: make the xtal frequency a configuration option From: Hartmut Hackmann Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by: Hartmut Hackmann --- linux/drivers/media/dvb/dvb-usb/ttusb2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/ttusb2.c b/linux/drivers/media/dvb/dvb-usb/ttusb2.c index dd11a1fee..e79a26473 100644 --- a/linux/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/linux/drivers/media/dvb/dvb-usb/ttusb2.c @@ -153,6 +153,7 @@ static struct tda10086_config tda10086_config = { .demod_address = 0x0e, .invert = 0, .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, }; static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap) -- cgit v1.2.3 From c0fa62bb592bf843bd22a0a9f547db7f922934e4 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Mon, 21 Apr 2008 00:13:37 +0200 Subject: stv0299: Fixed some typos From: Oliver Endriss Fixed some typos. Signed-off-by: Oliver Endriss --- linux/drivers/media/dvb/dvb-usb/opera1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/opera1.c b/linux/drivers/media/dvb/dvb-usb/opera1.c index 1cb2a5e90..cba064615 100644 --- a/linux/drivers/media/dvb/dvb-usb/opera1.c +++ b/linux/drivers/media/dvb/dvb-usb/opera1.c @@ -257,7 +257,7 @@ static struct stv0299_config opera1_stv0299_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_0, + .lock_output = STV0299_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, .inittab = opera1_inittab, .set_symbol_rate = opera1_stv0299_set_symbol_rate, -- cgit v1.2.3 From b6aa0e3bb3f6ae6815f6fc303b9ee734fdaa8cbf Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 21 Apr 2008 03:58:48 -0300 Subject: tuner-xc2028: Several fixes to SCODE From: Mauro Carvalho Chehab This patch fixes several issues on SCODE: 1) The extracting tool weren't generating the proper tags for SCODE. This has almost no effect, since those tags shouldn't be used; 2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700; 3) seek_firmware were wanting an exact match for firmware type. This is wrong. As result, no SCODE firmware were loaded; 4) A few files were including the wrong file for seeking demod firmwares; 5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware. However, this weren't documentated. This feature require more testing. Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c index 8017f1e8a..ddfa0cff7 100644 --- a/linux/drivers/media/dvb/dvb-usb/cxusb.c +++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c @@ -33,7 +33,6 @@ #include "mt352_priv.h" #include "zl10353.h" #include "tuner-xc2028.h" -#include "tuner-xc2028-types.h" #include "tuner-simple.h" /* debug */ @@ -521,7 +520,7 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) static struct xc2028_ctrl ctl = { .fname = "xc3028-dvico-au-01.fw", .max_len = 64, - .scode_table = ZARLINK456, + .scode_table = XC3028_FE_ZARLINK456, }; fe = dvb_attach(xc2028_attach, adap->fe, &cfg); -- cgit v1.2.3 From 3cc5f4b65c2a7cc8aae113cf8749ef7ccb714a50 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 25 Apr 2008 00:53:34 +0000 Subject: xc3028_{agc,bw}_config namespace fix From: Adrian Bunk This patch fixes the following build error: <-- snip --> ... LD drivers/media/built-in.o drivers/media/dvb/built-in.o:(.data+0x1be6c): multiple definition of `xc3028_agc_config' drivers/media/video/built-in.o:(.data+0x36500): first defined here drivers/media/dvb/built-in.o:(.data+0x1be9c): multiple definition of `xc3028_bw_config' drivers/media/video/built-in.o:(.data+0x36530): first defined here make[3]: *** [drivers/media/built-in.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index 6477fc66c..346223856 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -299,7 +299,7 @@ static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) } /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ -struct dibx000_agc_config xc3028_agc_config = { +static struct dibx000_agc_config xc3028_agc_config = { BAND_VHF | BAND_UHF, /* band_caps */ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, @@ -342,7 +342,7 @@ struct dibx000_agc_config xc3028_agc_config = { }; /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ -struct dibx000_bandwidth_config xc3028_bw_config = { +static struct dibx000_bandwidth_config xc3028_bw_config = { 60000, 30000, /* internal, sampling */ 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, -- cgit v1.2.3 From aac29554759ba1097551414afc35ed9fa13056c2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 26 Apr 2008 13:13:56 -0300 Subject: From: Mauro Carvalho Chehab Move tuners to common/tuners There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. This patch moves those common tuners into a common dir. It also moves saa7146 driver into drivers/media/video, where other hybrid drivers are placed. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile index 60a910052..c6511a6c0 100644 --- a/linux/drivers/media/dvb/dvb-usb/Makefile +++ b/linux/drivers/media/dvb/dvb-usb/Makefile @@ -63,5 +63,5 @@ obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 -EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners -- cgit v1.2.3 From c8566d4e92c2279fd31da9154b12034dd1d1984d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 30 Apr 2008 00:09:25 -0300 Subject: Use the same name convention for all tuners under common/tuners From: Mauro Carvalho Chehab kernel-sync: Auto generated by this script: for i in `find drivers/media/ -name Kconfig`; do cat $i |\ sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g |\ sed s,VIDEO_TUNER,MEDIA_TUNER,g |\ sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g |\ sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g |\ sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g |\ sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g |\ sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g |\ sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g |\ sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g |\ sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g |\ sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g |\ sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g |\ sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g |\ sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g |\ sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g |\ sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done for i in `find drivers/media/ -type f`; do cat $i |\ sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g |\ sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g |\ sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g |\ sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g |\ sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g |\ sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g |\ sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g |\ sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g |\ sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g |\ sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g |\ sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g |\ sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g |\ sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g |\ sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g |\ sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g |\ sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Kconfig | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 3c8493d20..4c1cff9fe 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -25,7 +25,7 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -35,7 +35,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-B demodulator. @@ -56,7 +56,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-C/P demodulator. @@ -73,8 +73,8 @@ config DVB_USB_DIB0700 select DVB_DIB7000P select DVB_DIB7000M select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select DVB_TUNER_MT2266 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The @@ -93,7 +93,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -105,7 +105,7 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -118,7 +118,7 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -129,7 +129,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -138,7 +138,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -190,7 +190,7 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -227,8 +227,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) -- cgit v1.2.3 From d2e4d325373507cb36a3c4993cd675331edad4cd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 6 May 2008 11:09:01 -0300 Subject: Fix FW_LOADER depencency at v4l/dvb From: Mauro Carvalho Chehab Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 4c1cff9fe..cf4584e48 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,7 @@ config DVB_USB tristate "Support for various USB DVB devices" depends on DVB_CORE && USB && I2C + depends on HOTPLUG # due to FW_LOADER select FW_LOADER help By enabling this you will be able to choose the various supported -- cgit v1.2.3 From ebb4e330e16359764aa5d9083b92f8631bc669ea Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 11 May 2008 19:53:39 +0000 Subject: gp8psk_power_ctrl should return negative errors From: Marcin Slusarz Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/gp8psk.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index cc99e1cab..0a152fcb5 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -146,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; -- cgit v1.2.3 From 17f89c4f89ca31ad9e0bb7630d9579371ee32e7f Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sun, 18 May 2008 02:05:48 +0300 Subject: Anysee: driver for Anysee DVB-T/C receiver From: Antti Palosaari - driver for Anysee DVB-T/C receiver Signed-off-by: Antti Palosaari --- linux/drivers/media/dvb/dvb-usb/Kconfig | 10 + linux/drivers/media/dvb/dvb-usb/Makefile | 3 + linux/drivers/media/dvb/dvb-usb/anysee.c | 558 ++++++++++++++++++++++++++ linux/drivers/media/dvb/dvb-usb/anysee.h | 304 ++++++++++++++ linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 + 5 files changed, 877 insertions(+) create mode 100644 linux/drivers/media/dvb/dvb-usb/anysee.c create mode 100644 linux/drivers/media/dvb/dvb-usb/anysee.h (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index cf4584e48..e2abf61f8 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -241,3 +241,13 @@ config DVB_USB_AF9005_REMOTE Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_MT352 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. + diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile index c6511a6c0..44c11e45e 100644 --- a/linux/drivers/media/dvb/dvb-usb/Makefile +++ b/linux/drivers/media/dvb/dvb-usb/Makefile @@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o +dvb-usb-anysee-objs = anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c new file mode 100644 index 000000000..89675dbf7 --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.c @@ -0,0 +1,558 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#include "anysee.h" +#include "tda1002x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" + +/* debug */ +static int dvb_usb_anysee_debug; +module_param_named(debug, dvb_usb_anysee_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct mutex anysee_usb_mutex; + +static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, + u8 *rbuf, u8 rlen) +{ + struct anysee_state *state = d->priv; + int act_len, ret; + u8 buf[64]; + + if (slen > sizeof(buf)) + slen = sizeof(buf); + memcpy(&buf[0], sbuf, slen); + buf[60] = state->seq++; + + if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) + return -EAGAIN; + + /* We need receive one message more after dvb_usb_generic_rw due + to weird transaction flow, which is 1 x send + 2 x receive. */ + ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + + if (!ret) { + /* receive 2nd answer */ + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + &act_len, 2000); + if (ret) + err("%s: recv bulk message failed: %d", __func__, ret); + else { + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + } + } + + /* read request, copy returned data to return buf */ + if (!ret && rbuf && rlen) + memcpy(rbuf, buf, rlen); + + mutex_unlock(&anysee_usb_mutex); + + return ret; +} + +static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; + int ret; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + return ret; +} + +static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) +{ + u8 buf[] = {CMD_GET_HW_INFO}; + return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); +} + +static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); +} + +static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; + deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_init(struct dvb_usb_device *d) +{ + int ret; + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + return 0; +} + +/* I2C */ +static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret, inc, i = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + u8 buf[6]; + buf[0] = CMD_I2C_READ; + buf[1] = msg[i].addr + 1; + buf[2] = msg[i].buf[0]; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x01; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + msg[i+1].len); + inc = 2; + } else { + u8 buf[4+msg[i].len]; + buf[0] = CMD_I2C_WRITE; + buf[1] = msg[i].addr; + buf[2] = msg[i].len; + buf[3] = 0x01; + memcpy(&buf[4], msg[i].buf, msg[i].len); + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + inc = 1; + } + if (ret) + return ret; + + i += inc; + } + + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static u32 anysee_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm anysee_i2c_algo = { + .master_xfer = anysee_master_xfer, + .functionality = anysee_i2c_func, +}; + +static int anysee_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +/* Callbacks for DVB USB */ +static struct tda10023_config anysee_tda10023_config = { + .demod_address = 0x1a, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xfed6, +}; + +static struct mt352_config anysee_mt352_config = { + .demod_address = 0x1e, + .demod_init = anysee_mt352_demod_init, +}; + +static struct zl10353_config anysee_zl10353_config = { + .demod_address = 0x1e, + .parallel_ts = 1, +}; + +static int anysee_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct anysee_state *state = adap->dev->priv; + u8 hw_info[3]; + u8 io_d; /* IO port D */ + + /* check which hardware we have + We must do this call two times to get reliable values (hw bug). */ + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + + /* Meaning of these info bytes are guessed. */ + info("firmware version:%d.%d.%d hardware id:%d", + 0, hw_info[1], hw_info[2], hw_info[0]); + + ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ + if (ret) + return ret; + deb_info("%s: IO port D:%02x\n", __func__, io_d); + + /* Select demod using trial and error method. */ + + /* Try to attach demodulator in following order: + model demod hw firmware + 1. E30 MT352 02 0.2.1 + 2. E30 ZL10353 02 0.2.1 + 3. E30 Plus ZL10353 06 0.1.0 + 4. E30C Plus TDA10023 0a 0.1.0 + E30C Plus TDA10023 0f 0.1.2 (not working) + */ + + /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* connect demod on IO port D for TDA10023 & ZL10353 */ + ret = anysee_write_reg(adap->dev, 0xb0, 0x25); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* known not working (E30C Plus v0.1.2) */ + if (hw_info[0] == 0x0f) { + info("this version of Anysee is not supported yet"); + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + return -ENODEV; + } + + /* Philips TDA10023 DVB-C demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + if (ret) + return ret; + + err("Unkown Anysee version: %02x %02x %02x. "\ + "Please report the .", + hw_info[0], hw_info[1], hw_info[2]); + + return -ENODEV; +} + +static int anysee_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct anysee_state *state = adap->dev->priv; + deb_info("%s: \n", __func__); + + switch (state->tuner) { + case DVB_PLL_THOMSON_DTT7579: + /* Thomson dtt7579 (not sure) PLL inside of: + Samsung DNOS404ZH102A NIM + Samsung DNOS404ZH103A NIM */ + dvb_attach(dvb_pll_attach, adap->fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + break; + case DVB_PLL_SAMSUNG_DTOS403IH102A: + /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ + dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; + } + + return 0; +} + +static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[] = {CMD_GET_IR_CODE}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i, ret; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + return 0; +} + +static struct dvb_usb_rc_key anysee_rc_keys[] = { + { 0x01, 0x00, KEY_0 }, + { 0x01, 0x01, KEY_1 }, + { 0x01, 0x02, KEY_2 }, + { 0x01, 0x03, KEY_3 }, + { 0x01, 0x04, KEY_4 }, + { 0x01, 0x05, KEY_5 }, + { 0x01, 0x06, KEY_6 }, + { 0x01, 0x07, KEY_7 }, + { 0x01, 0x08, KEY_8 }, + { 0x01, 0x09, KEY_9 }, + { 0x01, 0x0a, KEY_POWER }, + { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */ + { 0x01, 0x19, KEY_FAVORITES }, + { 0x01, 0x20, KEY_SLEEP }, + { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */ + { 0x01, 0x22, KEY_ZOOM }, + { 0x01, 0x47, KEY_TEXT }, + { 0x01, 0x16, KEY_TV }, /* TV / radio select */ + { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */ + { 0x01, 0x1a, KEY_SUBTITLE }, + { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */ + { 0x01, 0x42, KEY_MUTE }, + { 0x01, 0x0e, KEY_MENU }, + { 0x01, 0x0f, KEY_EPG }, + { 0x01, 0x17, KEY_INFO }, + { 0x01, 0x10, KEY_EXIT }, + { 0x01, 0x13, KEY_VOLUMEUP }, + { 0x01, 0x12, KEY_VOLUMEDOWN }, + { 0x01, 0x11, KEY_CHANNELUP }, + { 0x01, 0x14, KEY_CHANNELDOWN }, + { 0x01, 0x15, KEY_OK }, + { 0x01, 0x1d, KEY_RED }, + { 0x01, 0x1f, KEY_GREEN }, + { 0x01, 0x1c, KEY_YELLOW }, + { 0x01, 0x44, KEY_BLUE }, + { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */ + { 0x01, 0x48, KEY_STOP }, + { 0x01, 0x50, KEY_PLAY }, + { 0x01, 0x51, KEY_PAUSE }, + { 0x01, 0x49, KEY_RECORD }, + { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */ + { 0x01, 0x0d, KEY_NEXT }, /* >>| */ + { 0x01, 0x24, KEY_PROG1 }, /* F1 */ + { 0x01, 0x25, KEY_PROG2 }, /* F2 */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_properties; + +static int anysee_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + mutex_init(&anysee_usb_mutex); + + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + if (intf->num_altsetting < 1) + return -ENODEV; + + ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, + adapter_nr); + if (ret) + return ret; + + alt = usb_altnum_to_altsetting(intf, 0); + if (alt == NULL) { + deb_info("%s: no alt found!\n", __func__); + return -ENODEV; + } + + ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret) + return ret; + + if (d) + ret = anysee_init(d); + + return ret; +} + +static struct usb_device_id anysee_table [] = { + { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, + { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, anysee_table); + +static struct dvb_usb_device_properties anysee_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct anysee_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = anysee_streaming_ctrl, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .rc_key_map = anysee_rc_keys, + .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys), + .rc_query = anysee_rc_query, + .rc_interval = 200, /* windows driver uses 500ms */ + + .i2c_algo = &anysee_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { + .name = "Anysee DVB USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&anysee_table[0], + &anysee_table[1], NULL}, + }, + } +}; + +static struct usb_driver anysee_driver = { +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) + .owner = THIS_MODULE, +#endif + .name = "dvb_usb_anysee", + .probe = anysee_probe, + .disconnect = dvb_usb_device_exit, + .id_table = anysee_table, +}; + +/* module stuff */ +static int __init anysee_module_init(void) +{ + int ret; + + ret = usb_register(&anysee_driver); + if (ret) + err("%s: usb_register failed. Error number %d", __func__, ret); + + return ret; +} + +static void __exit anysee_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&anysee_driver); +} + +module_init(anysee_module_init); +module_exit(anysee_module_exit); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.h b/linux/drivers/media/dvb/dvb-usb/anysee.h new file mode 100644 index 000000000..48da3949e --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.h @@ -0,0 +1,304 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, +}; + +struct anysee_state { + u8 tuner; + u8 seq; +}; + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | 0x01 +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 34245d1b7..e6b43fb3a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -14,6 +14,7 @@ #define USB_VID_AFATECH 0x15a4 #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd @@ -57,6 +58,7 @@ #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 -- cgit v1.2.3 From dfc4516ba175f419fc8aa9701550df4eb08cdfbb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 20 May 2008 08:02:33 +0000 Subject: usb: input layer dependency fixes From: Ingo Molnar testing of the -tip tree found the following build failures on 2.6.26-rc3: drivers/built-in.o: In function `ttusb_dec_disconnect': ttusb_dec.c:(.text+0xa2c95): undefined reference to `input_unregister_device' drivers/built-in.o: In function `dvb_usb_read_remote_control': dvb-usb-remote.c:(.text+0xa6a94): undefined reference to `input_event' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_03_48_57_CEST_2008.bad these are due to the media/dvb/usb layer having dependencies on INPUT functionality, without having that spelled out in the Kconfig file. this patch makes that dependency explicit (for the drivers affected), which solves the build error. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index cf4584e48..f00a0eb40 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,6 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER help -- cgit v1.2.3 From d0d7c2a003a0f7736b0854159f8c3d1127b49269 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 03:53:27 +0300 Subject: AU6610: coding style fixes From: Antti Palosaari - coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari --- linux/drivers/media/dvb/dvb-usb/au6610.c | 40 +++++++++++++++----------------- linux/drivers/media/dvb/dvb-usb/au6610.h | 2 +- 2 files changed, 20 insertions(+), 22 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index 578a27d14..a278c1a7d 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -3,8 +3,8 @@ * Copyright (C) 2006 Antti Palosaari * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */ @@ -17,8 +17,8 @@ /* debug */ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." + DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, @@ -42,9 +42,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, } ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, - USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf, - sizeof(usb_buf), AU6610_USB_TIMEOUT); - + USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, + usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT); if (ret < 0) return ret; @@ -133,12 +132,12 @@ static struct zl10353_config au6610_zl10353_config = { static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) { - if ((adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, - &adap->dev->i2c_adap)) != NULL) { - return 0; - } + adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -EIO; - return -EIO; + return 0; } static struct qt1010_config au6610_qt1010_config = { @@ -186,7 +185,7 @@ static struct usb_device_id au6610_table [] = { { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, au6610_table); +MODULE_DEVICE_TABLE(usb, au6610_table); static struct dvb_usb_device_properties au6610_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, @@ -206,7 +205,7 @@ static struct dvb_usb_device_properties au6610_properties = { .u = { .isoc = { .framesperurb = 40, - .framesize = 942, /* maximum packet size */ + .framesize = 942, .interval = 1.25, /* 125 us */ } } @@ -225,7 +224,7 @@ static struct dvb_usb_device_properties au6610_properties = { }; static struct usb_driver au6610_driver = { -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) .owner = THIS_MODULE, #endif .name = "dvb_usb_au6610", @@ -239,12 +238,11 @@ static int __init au6610_module_init(void) { int ret; - if ((ret = usb_register(&au6610_driver))) { + ret = usb_register(&au6610_driver); + if (ret) err("usb_register failed. Error number %d", ret); - return ret; - } - return 0; + return ret; } static void __exit au6610_module_exit(void) @@ -253,8 +251,8 @@ static void __exit au6610_module_exit(void) usb_deregister(&au6610_driver); } -module_init (au6610_module_init); -module_exit (au6610_module_exit); +module_init(au6610_module_init); +module_exit(au6610_module_exit); MODULE_AUTHOR("Antti Palosaari "); MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610"); diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.h b/linux/drivers/media/dvb/dvb-usb/au6610.h index 4161b054c..abca6291c 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.h +++ b/linux/drivers/media/dvb/dvb-usb/au6610.h @@ -4,7 +4,7 @@ #define DVB_USB_LOG_PREFIX "au6610" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_au6610_debug,0x01,args) +#define deb_rc(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) #define AU6610_REQ_I2C_WRITE 0x14 #define AU6610_REQ_I2C_READ 0x13 -- cgit v1.2.3 From b1fe778562f674e76125918232a24f8ff94cccba Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 04:01:04 +0300 Subject: AU6610: remove useless identify_state From: Antti Palosaari - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari --- linux/drivers/media/dvb/dvb-usb/au6610.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index a278c1a7d..a9ded9f3a 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -115,15 +115,6 @@ static struct i2c_algorithm au6610_i2c_algo = { }; /* Callbacks for DVB USB */ -static int au6610_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - return 0; -} - static struct zl10353_config au6610_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -191,7 +182,6 @@ static struct dvb_usb_device_properties au6610_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .size_of_priv = 0, - .identify_state = au6610_identify_state, .num_adapters = 1, .adapter = { { @@ -213,12 +203,13 @@ static struct dvb_usb_device_properties au6610_properties = { } }, .i2c_algo = &au6610_i2c_algo, + .num_device_descs = 1, .devices = { { - "Sigmatek DVB-110 DVB-T USB2.0", - { &au6610_table[0], NULL }, - { NULL }, + .name = "Sigmatek DVB-110 DVB-T USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&au6610_table[0], NULL}, }, } }; -- cgit v1.2.3 From 69afedcd6c1b81218dbc0d64a948ce1106199131 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 06:57:39 +0300 Subject: AU6610: various cosmetic changes From: Antti Palosaari - update license comments - change MODULE_DESCRIPTION from device specific to chipset specific - correct debug switch from deb_rc to deb_info - correct MPEG2 stream interval from 1.25 to 1 - change frontend_attach error code from -EIO to -ENODEV Signed-off-by: Antti Palosaari --- linux/drivers/media/dvb/dvb-usb/au6610.c | 38 ++++++++++++++++++++------------ linux/drivers/media/dvb/dvb-usb/au6610.h | 22 +++++++++++++++++- 2 files changed, 45 insertions(+), 15 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index a9ded9f3a..fc3375c60 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -1,24 +1,31 @@ -/* DVB USB compliant linux driver for Sigmatek DVB-110 DVB-T USB2.0 receiver +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. * * Copyright (C) 2006 Antti Palosaari * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * see Documentation/dvb/README.dvb-usb for more information + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "au6610.h" - #include "zl10353.h" #include "qt1010.h" /* debug */ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." - DVB_USB_DEBUG_STATUS); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, @@ -126,7 +133,7 @@ static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, &adap->dev->i2c_adap); if (adap->fe == NULL) - return -EIO; + return -ENODEV; return 0; } @@ -161,7 +168,7 @@ static int au6610_probe(struct usb_interface *intf, alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); if (alt == NULL) { - deb_rc("no alt found!\n"); + deb_info("%s: no alt found!\n", __func__); return -ENODEV; } ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, @@ -171,7 +178,6 @@ static int au6610_probe(struct usb_interface *intf, return ret; } - static struct usb_device_id au6610_table [] = { { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, { } /* Terminating entry */ @@ -180,8 +186,11 @@ MODULE_DEVICE_TABLE(usb, au6610_table); static struct dvb_usb_device_properties au6610_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = 0, + + .size_of_priv = 0, + .num_adapters = 1, .adapter = { { @@ -196,12 +205,13 @@ static struct dvb_usb_device_properties au6610_properties = { .isoc = { .framesperurb = 40, .framesize = 942, - .interval = 1.25, /* 125 us */ + .interval = 1, } } }, } }, + .i2c_algo = &au6610_i2c_algo, .num_device_descs = 1, @@ -246,6 +256,6 @@ module_init(au6610_module_init); module_exit(au6610_module_exit); MODULE_AUTHOR("Antti Palosaari "); -MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610"); +MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.h b/linux/drivers/media/dvb/dvb-usb/au6610.h index abca6291c..7849abe2c 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.h +++ b/linux/drivers/media/dvb/dvb-usb/au6610.h @@ -1,10 +1,30 @@ +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. + * + * Copyright (C) 2006 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + #ifndef _DVB_USB_AU6610_H_ #define _DVB_USB_AU6610_H_ #define DVB_USB_LOG_PREFIX "au6610" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) +#define deb_info(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) #define AU6610_REQ_I2C_WRITE 0x14 #define AU6610_REQ_I2C_READ 0x13 -- cgit v1.2.3 From 0c410f0783724c960f027e07b1a0eaddb515252f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 21 May 2008 00:31:21 +0000 Subject: fix endianness bug in dib0700_devices.c From: Al Viro Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index 346223856..c4d40fe01 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -111,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -402,8 +402,8 @@ static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - if (desc->idVendor == USB_VID_PINNACLE && - desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX) + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); @@ -845,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -990,11 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE && - adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); -- cgit v1.2.3 From 8a60d4bcdc0249852620b847552a86d0b49b0dc6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 21 May 2008 00:32:41 +0000 Subject: m920x: unaligned access From: Al Viro Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/m920x.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c index 7597c4b78..5a7766fab 100644 --- a/linux/drivers/media/dvb/dvb-usb/m920x.c +++ b/linux/drivers/media/dvb/dvb-usb/m920x.c @@ -16,6 +16,7 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include /* debug */ static int dvb_usb_m920x_debug; @@ -347,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { -- cgit v1.2.3 From 45c2f7f961e7e6bb92b03635989ceade61e15d98 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 21 May 2008 00:33:01 +0000 Subject: usb: unaligned From: Al Viro Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e39f..733a7ff7b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { -- cgit v1.2.3 From 2a79e6ad21afbacd47657490937dfae88775f6f1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 5 Jun 2008 10:13:24 -0300 Subject: Backport a few fixes from mainstream From: Mauro Carvalho Chehab - use asm/byteorder.h, instead of linux/byteorder/generic.h - A small Kconfig fix for soc_camera Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 615e5bbec..3f7b9b632 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -250,4 +250,3 @@ config DVB_USB_ANYSEE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. - -- cgit v1.2.3