From 2c0b6e88d3a926ef7a9e118642f1aedf091c29f8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 6 Nov 2008 01:12:56 +0000 Subject: Add TerraTec Cinergy S USB support From: Igor M. Liplianin Add TerraTec Cinergy S USB support Signed-off-by: Igor M. Liplianin Acked-by: Thorsten Leupold Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/dw2102.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c index c9431713d..bc5e47a2b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dw2102.c +++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c @@ -26,6 +26,10 @@ #define USB_PID_DW2104 0x2104 #endif +#ifndef USB_PID_CINERGY_S +#define USB_PID_CINERGY_S 0x0064 +#endif + #define DW210X_READ_MSG 0 #define DW210X_WRITE_MSG 1 @@ -577,6 +581,7 @@ static struct usb_device_id dw2102_table[] = { {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, {USB_DEVICE(USB_VID_CYPRESS, 0x2104)}, {USB_DEVICE(0x9022, 0xd650)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)}, { } }; @@ -646,6 +651,7 @@ static int dw2102_load_firmware(struct usb_device *dev, dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, DW210X_WRITE_MSG); break; + case USB_PID_CINERGY_S: case USB_PID_DW2102: dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, DW210X_WRITE_MSG); @@ -725,7 +731,7 @@ static struct dvb_usb_device_properties dw2102_properties = { }, } }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { {"DVBWorld DVB-S 2102 USB2.0", {&dw2102_table[0], NULL}, @@ -735,6 +741,10 @@ static struct dvb_usb_device_properties dw2102_properties = { {&dw2102_table[1], NULL}, {NULL}, }, + {"TerraTec Cinergy S USB", + {&dw2102_table[4], NULL}, + {NULL}, + }, } }; -- cgit v1.2.3 From 9690379dc06a080d7172bc3b2d21544f2bf3d8e1 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Wed, 12 Nov 2008 00:56:56 -0200 Subject: usb-urb: fix memory leak From: Douglas Schilling Landgraf Free allocated memory Priority: high Signed-off-by: Douglas Schilling Landgraf --- linux/drivers/media/dvb/dvb-usb/usb-urb.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/usb-urb.c b/linux/drivers/media/dvb/dvb-usb/usb-urb.c index 5caec2034..eb3aaaf7a 100644 --- a/linux/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/linux/drivers/media/dvb/dvb-usb/usb-urb.c @@ -139,7 +139,7 @@ stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]) static int usb_bulk_urb_init(struct usb_data_stream *stream) { - int i; + int i, j; if ((i = usb_allocate_stream_buffers(stream,stream->props.count, stream->props.u.bulk.buffersize)) < 0) @@ -147,9 +147,13 @@ static int usb_bulk_urb_init(struct usb_data_stream *stream) /* allocate the URBs */ for (i = 0; i < stream->props.count; i++) { - if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL) + stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!.\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; - + } usb_fill_bulk_urb( stream->urb_list[i], stream->udev, usb_rcvbulkpipe(stream->udev,stream->props.endpoint), stream->buf_list[i], @@ -174,9 +178,14 @@ static int usb_isoc_urb_init(struct usb_data_stream *stream) for (i = 0; i < stream->props.count; i++) { struct urb *urb; int frame_offset = 0; - if ((stream->urb_list[i] = - usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL) + + stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; + } urb = stream->urb_list[i]; -- cgit v1.2.3 From 6c862246c352268e001c5dfb9f657f2b4832364e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 15 Nov 2008 04:08:45 +0000 Subject: dvb: cinergyt2 annotate struct endianness, remove unused variable, add static From: Harvey Harrison All noticed by sparse: drivers/media/dvb/dvb-usb/cinergyT2-core.c:35:5: warning: symbol 'disable_remote' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-core.c:48:23: warning: symbol 'cinergyt2_usb_device' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-fe.c:160:15: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:190:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:208:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:227:24: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: expected unsigned short [unsigned] [assigned] [usertype] tps drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: got restricted __le16 [usertype] drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: expected unsigned int [unsigned] [assigned] [usertype] freq drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: got restricted __le32 [usertype] Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton CC: Thierry Merle Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/cinergyT2-core.c | 3 +-- linux/drivers/media/dvb/dvb-usb/cinergyT2.h | 10 +++++----- 2 files changed, 6 insertions(+), 7 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/linux/drivers/media/dvb/dvb-usb/cinergyT2-core.c index 3ac9f74e9..80e37a0d0 100644 --- a/linux/drivers/media/dvb/dvb-usb/cinergyT2-core.c +++ b/linux/drivers/media/dvb/dvb-usb/cinergyT2-core.c @@ -32,7 +32,6 @@ /* debug */ int dvb_usb_cinergyt2_debug; -int disable_remote; module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " @@ -45,7 +44,7 @@ struct cinergyt2_state { }; /* We are missing a release hook with usb_device data */ -struct dvb_usb_device *cinergyt2_usb_device; +static struct dvb_usb_device *cinergyt2_usb_device; static struct dvb_usb_device_properties cinergyt2_properties; diff --git a/linux/drivers/media/dvb/dvb-usb/cinergyT2.h b/linux/drivers/media/dvb/dvb-usb/cinergyT2.h index f008b41ad..4e3247d04 100644 --- a/linux/drivers/media/dvb/dvb-usb/cinergyT2.h +++ b/linux/drivers/media/dvb/dvb-usb/cinergyT2.h @@ -74,11 +74,11 @@ struct dvbt_get_status_msg { uint8_t bandwidth; uint16_t tps; uint8_t flags; - uint16_t gain; + __le16 gain; uint8_t snr; - uint32_t viterbi_error_rate; + __le32 viterbi_error_rate; uint32_t rs_error_rate; - uint32_t uncorrected_block_count; + __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); @@ -86,9 +86,9 @@ struct dvbt_get_status_msg { struct dvbt_set_parameters_msg { uint8_t cmd; - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; } __attribute__((packed)); -- cgit v1.2.3 From 0dd5f609f5faa9eabdd86966e9bf7dd9d8d45b05 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Nov 2008 21:19:56 +0000 Subject: usb vendor_ids/product_ids are __le16 From: Harvey Harrison Noticed by sparse: drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer Signed-off-by: Harvey Harrison Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/af9015.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c index 6bc55614d..21e10fa23 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.c +++ b/linux/drivers/media/dvb/dvb-usb/af9015.c @@ -742,7 +742,7 @@ static int af9015_read_config(struct usb_device *udev) } } else { switch (udev->descriptor.idVendor) { - case USB_VID_LEADTEK: + case cpu_to_le16(USB_VID_LEADTEK): af9015_properties[i].rc_key_map = af9015_rc_keys_leadtek; af9015_properties[i].rc_key_map_size = @@ -752,9 +752,9 @@ static int af9015_read_config(struct usb_device *udev) af9015_config.ir_table_size = ARRAY_SIZE(af9015_ir_table_leadtek); break; - case USB_VID_VISIONPLUS: + case cpu_to_le16(USB_VID_VISIONPLUS): if (udev->descriptor.idProduct == - USB_PID_AZUREWAVE_AD_TU700) { + cpu_to_le16(USB_PID_AZUREWAVE_AD_TU700)) { af9015_properties[i].rc_key_map = af9015_rc_keys_twinhan; af9015_properties[i].rc_key_map_size = @@ -765,7 +765,7 @@ static int af9015_read_config(struct usb_device *udev) ARRAY_SIZE(af9015_ir_table_twinhan); } break; - case USB_VID_KWORLD_2: + case cpu_to_le16(USB_VID_KWORLD_2): /* TODO: use correct rc keys */ af9015_properties[i].rc_key_map = af9015_rc_keys_twinhan; @@ -778,7 +778,7 @@ static int af9015_read_config(struct usb_device *udev) /* Check USB manufacturer and product strings and try to determine correct remote in case of chip vendor reference IDs are used. */ - case USB_VID_AFATECH: + case cpu_to_le16(USB_VID_AFATECH): memset(manufacturer, 0, sizeof(manufacturer)); usb_string(udev, udev->descriptor.iManufacturer, manufacturer, sizeof(manufacturer)); @@ -806,7 +806,7 @@ static int af9015_read_config(struct usb_device *udev) ARRAY_SIZE(af9015_ir_table_msi); } break; - case USB_VID_AVERMEDIA: + case cpu_to_le16(USB_VID_AVERMEDIA): af9015_properties[i].rc_key_map = af9015_rc_keys_avermedia; af9015_properties[i].rc_key_map_size = -- cgit v1.2.3 From 63fddcde9b4824f1bd5d261dd0f91171d560a98a Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 13 Nov 2008 19:14:18 +0200 Subject: af9015: don't reconnect device in USB-bus From: Jose Alberto Reguero Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it. Priority: high Signed-off-by: Jose Alberto Reguero Signed-off-by: Antti Palosaari --- linux/drivers/media/dvb/dvb-usb/af9015.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c index 6bc55614d..c52ebce9f 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.c +++ b/linux/drivers/media/dvb/dvb-usb/af9015.c @@ -681,12 +681,6 @@ static int af9015_download_firmware(struct usb_device *udev, goto error; } - /* firmware is running, reconnect device in the usb bus */ - req.cmd = RECONNECT_USB; - ret = af9015_rw_udev(udev, &req); - if (ret) - err("reconnect failed: %d", ret); - error: return ret; } @@ -1219,6 +1213,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ @@ -1317,6 +1312,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ -- cgit v1.2.3 From 0a07568bd0fb79c5dbd57d88a42e771cb6224f05 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 15 Nov 2008 11:13:07 +0100 Subject: Make dib0700 remote control support work with firmware v1.20 From: Devin Heitmueller The format for reading the IR controller changed in firmware 1.20. It now provides the events on bulk endpoint 1 instead of using a control request. Support the new format, providing backward compatibility for users who might be using older firmware. Thanks to Patrick Boettcher for providing the required information on how the version 1.20 firmware works. Priority: high Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher --- linux/drivers/media/dvb/dvb-usb/dib0700.h | 5 +- linux/drivers/media/dvb/dvb-usb/dib0700_core.c | 16 +++ linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 139 +++++++++++++++++++++- 3 files changed, 158 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700.h b/linux/drivers/media/dvb/dvb-usb/dib0700.h index 739193943..8b544fe79 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700.h +++ b/linux/drivers/media/dvb/dvb-usb/dib0700.h @@ -22,7 +22,7 @@ extern int dvb_usb_dib0700_debug; #define REQUEST_I2C_READ 0x2 #define REQUEST_I2C_WRITE 0x3 -#define REQUEST_POLL_RC 0x4 +#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */ #define REQUEST_JUMPRAM 0x8 #define REQUEST_SET_CLOCK 0xB #define REQUEST_SET_GPIO 0xC @@ -40,11 +40,14 @@ struct dib0700_state { u16 mt2060_if1[2]; u8 rc_toggle; u8 rc_counter; + u8 rc_func_version; u8 is_dib7000pc; u8 fw_use_new_i2c_api; u8 disable_streaming_master_mode; }; +extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype); extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c index 3c7bdef28..2fbb7049a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -19,6 +19,22 @@ MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (defau DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype) +{ + u8 b[16]; + int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + b, sizeof(b), USB_CTRL_GET_TIMEOUT); + *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; + *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7]; + *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11]; + *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15]; + return ret; +} + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0cfccc24b..f28d3ae59 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -38,6 +38,7 @@ static struct mt2060_config bristol_mt2060_config[2] = { } }; + static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { .band_caps = BAND_VHF | BAND_UHF, .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), @@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ #define RC_REPEAT_DELAY 2 +#define RC_REPEAT_DELAY_V1_20 5 -static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) + + +/* Used by firmware versions < 1.20 (deprecated) */ +static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, + int *state) { u8 key[4]; int i; @@ -529,6 +535,137 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) return 0; } +/* This is the structure of the RC response packet starting in firmware 1.20 */ +struct dib0700_rc_response { + u8 report_id; + u8 data_state; + u8 system_msb; + u8 system_lsb; + u8 data; + u8 not_data; +}; + +/* This supports the new IR response format for firmware v1.20 */ +static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + struct dib0700_state *st = d->priv; + struct dib0700_rc_response poll_reply; + u8 buf[6]; + int i; + int status; + int actlen; + int found = 0; + + /* Set initial results in case we exit the function early */ + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + /* Firmware v1.20 provides RC data via bulk endpoint 1 */ + status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf, + sizeof(buf), &actlen, 50); + if (status < 0) { + /* No data available (meaning no key press) */ + return 0; + } + + if (actlen != sizeof(buf)) { + /* We didn't get back the 6 byte message we expected */ + err("Unexpected RC response size [%d]", actlen); + return -1; + } + + poll_reply.report_id = buf[0]; + poll_reply.data_state = buf[1]; + poll_reply.system_msb = buf[2]; + poll_reply.system_lsb = buf[3]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; + + /* + info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n", + poll_reply.report_id, poll_reply.data_state, + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + */ + + if ((poll_reply.data + poll_reply.not_data) != 0xff) { + /* Key failed integrity check */ + err("key failed integrity check: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + return -1; + } + + /* Find the key in the map */ + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == poll_reply.system_lsb && + keymap[i].data == poll_reply.data) { + *event = keymap[i].event; + found = 1; + break; + } + } + + if (found == 0) { + err("Unknown remote controller key: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + d->last_event = 0; + return 0; + } + + if (poll_reply.data_state == 1) { + /* New key hit */ + st->rc_counter = 0; + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + d->last_event = keymap[i].event; + } else if (poll_reply.data_state == 2) { + /* Key repeated */ + st->rc_counter++; + + /* prevents unwanted double hits */ + if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { + *event = d->last_event; + *state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY_V1_20; + } + } else { + err("Unknown data state [%d]", poll_reply.data_state); + } + + return 0; +} + +static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct dib0700_state *st = d->priv; + + /* Because some people may have improperly named firmware files, + let's figure out whether to use the new firmware call or the legacy + call based on the firmware version embedded in the file */ + if (st->rc_func_version == 0) { + u32 hwver, romver, ramver, fwtype; + int ret = dib0700_get_version(d, &hwver, &romver, &ramver, + &fwtype); + if (ret < 0) { + err("Could not determine version info"); + return -1; + } + if (ramver < 0x10200) + st->rc_func_version = 1; + else + st->rc_func_version = 2; + } + + if (st->rc_func_version == 2) + return dib0700_rc_query_v1_20(d, event, state); + else + return dib0700_rc_query_legacy(d, event, state); +} + static struct dvb_usb_rc_key dib0700_rc_keys[] = { /* Key codes for the tiny Pinnacle remote*/ { 0x07, 0x00, KEY_MUTE }, -- cgit v1.2.3 From e673ee96f4708b75bd25a9d4995dcf49667e239f Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 17 Nov 2008 22:20:38 +0200 Subject: af9015: Add support for the Digittrade DVB-T USB Stick remote From: Alain Kalker Adds support for the Digittrade DVB-T USB Stick remote. As the Digittrade USB stick identifies itself as a generic Afatech AF9015 device, the remote cannot be autodetected. To enable it, add the following to /etc/modprobe.d/dvb-usb-af9015 or /etc/modprobe.conf: options dvb-usb-af9015 remote=4 Priority: normal Signed-off-by: Alain Kalker Signed-off-by: Antti Palosaari --- linux/drivers/media/dvb/dvb-usb/af9015.c | 10 +++++ linux/drivers/media/dvb/dvb-usb/af9015.h | 64 ++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c index c52ebce9f..77a29f7f9 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.c +++ b/linux/drivers/media/dvb/dvb-usb/af9015.c @@ -733,6 +733,16 @@ static int af9015_read_config(struct usb_device *udev) af9015_config.ir_table_size = ARRAY_SIZE(af9015_ir_table_mygictv); break; + case AF9015_REMOTE_DIGITTRADE_DVB_T: + af9015_properties[i].rc_key_map = + af9015_rc_keys_digittrade; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_digittrade); + af9015_config.ir_table = + af9015_ir_table_digittrade; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_digittrade); + break; } } else { switch (udev->descriptor.idVendor) { diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.h b/linux/drivers/media/dvb/dvb-usb/af9015.h index 1ab86cc6c..21c7782f4 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.h +++ b/linux/drivers/media/dvb/dvb-usb/af9015.h @@ -123,6 +123,7 @@ enum af9015_remote { AF9015_REMOTE_A_LINK_DTU_M, AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, AF9015_REMOTE_MYGICTV_U718, + AF9015_REMOTE_DIGITTRADE_DVB_T, }; /* Leadtek WinFast DTV Dongle Gold */ @@ -596,4 +597,67 @@ static u8 af9015_ir_table_avermedia[] = { 0x03, 0xfc, 0x03, 0xfc, 0x0e, 0x05, 0x00, }; +/* Digittrade DVB-T USB Stick */ +static struct dvb_usb_rc_key af9015_rc_keys_digittrade[] = { + { 0x01, 0x0f, KEY_LAST }, /* RETURN */ + { 0x05, 0x17, KEY_TEXT }, /* TELETEXT */ + { 0x01, 0x08, KEY_EPG }, /* EPG */ + { 0x05, 0x13, KEY_POWER }, /* POWER */ + { 0x01, 0x09, KEY_ZOOM }, /* FULLSCREEN */ + { 0x00, 0x40, KEY_AUDIO }, /* DUAL SOUND */ + { 0x00, 0x2c, KEY_PRINT }, /* SNAPSHOT */ + { 0x05, 0x16, KEY_SUBTITLE }, /* SUBTITLE */ + { 0x00, 0x52, KEY_CHANNELUP }, /* CH Up */ + { 0x00, 0x51, KEY_CHANNELDOWN },/* Ch Dn */ + { 0x00, 0x57, KEY_VOLUMEUP }, /* Vol Up */ + { 0x00, 0x56, KEY_VOLUMEDOWN }, /* Vol Dn */ + { 0x01, 0x10, KEY_MUTE }, /* MUTE */ + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x01, 0x17, KEY_PLAYPAUSE }, /* TIMESHIFT */ + { 0x01, 0x15, KEY_RECORD }, /* RECORD */ + { 0x03, 0x13, KEY_PLAY }, /* PLAY */ + { 0x01, 0x16, KEY_STOP }, /* STOP */ + { 0x01, 0x13, KEY_PAUSE }, /* PAUSE */ +}; + +static u8 af9015_ir_table_digittrade[] = { + 0x00, 0xff, 0x06, 0xf9, 0x13, 0x05, 0x00, + 0x00, 0xff, 0x4d, 0xb2, 0x17, 0x01, 0x00, + 0x00, 0xff, 0x1f, 0xe0, 0x2c, 0x00, 0x00, + 0x00, 0xff, 0x0a, 0xf5, 0x15, 0x01, 0x00, + 0x00, 0xff, 0x0e, 0xf1, 0x16, 0x01, 0x00, + 0x00, 0xff, 0x09, 0xf6, 0x09, 0x01, 0x00, + 0x00, 0xff, 0x01, 0xfe, 0x08, 0x01, 0x00, + 0x00, 0xff, 0x05, 0xfa, 0x10, 0x01, 0x00, + 0x00, 0xff, 0x02, 0xfd, 0x56, 0x00, 0x00, + 0x00, 0xff, 0x40, 0xbf, 0x57, 0x00, 0x00, + 0x00, 0xff, 0x19, 0xe6, 0x52, 0x00, 0x00, + 0x00, 0xff, 0x17, 0xe8, 0x51, 0x00, 0x00, + 0x00, 0xff, 0x10, 0xef, 0x0f, 0x01, 0x00, + 0x00, 0xff, 0x54, 0xab, 0x27, 0x00, 0x00, + 0x00, 0xff, 0x1b, 0xe4, 0x1e, 0x00, 0x00, + 0x00, 0xff, 0x11, 0xee, 0x1f, 0x00, 0x00, + 0x00, 0xff, 0x15, 0xea, 0x20, 0x00, 0x00, + 0x00, 0xff, 0x12, 0xed, 0x21, 0x00, 0x00, + 0x00, 0xff, 0x16, 0xe9, 0x22, 0x00, 0x00, + 0x00, 0xff, 0x4c, 0xb3, 0x23, 0x00, 0x00, + 0x00, 0xff, 0x48, 0xb7, 0x24, 0x00, 0x00, + 0x00, 0xff, 0x04, 0xfb, 0x25, 0x00, 0x00, + 0x00, 0xff, 0x00, 0xff, 0x26, 0x00, 0x00, + 0x00, 0xff, 0x1e, 0xe1, 0x13, 0x03, 0x00, + 0x00, 0xff, 0x1a, 0xe5, 0x13, 0x01, 0x00, + 0x00, 0xff, 0x03, 0xfc, 0x17, 0x05, 0x00, + 0x00, 0xff, 0x0d, 0xf2, 0x16, 0x05, 0x00, + 0x00, 0xff, 0x1d, 0xe2, 0x40, 0x00, 0x00, +}; + #endif -- cgit v1.2.3 From ad1f215cdb537422f9af722be3eb8523720355c4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 20 Nov 2008 09:37:05 +0100 Subject: af9015: fix compilation error From: Hans Verkuil It is much more readable to swap the byteorder in the switch rather than in each case statement. In addition, this fixes a compile error when compiled for 2.6.16. Priority: normal Signed-off-by: Hans Verkuil --- linux/drivers/media/dvb/dvb-usb/af9015.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c index b2f724fb5..e6e534e04 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.c +++ b/linux/drivers/media/dvb/dvb-usb/af9015.c @@ -745,8 +745,8 @@ static int af9015_read_config(struct usb_device *udev) break; } } else { - switch (udev->descriptor.idVendor) { - case cpu_to_le16(USB_VID_LEADTEK): + switch (le16_to_cpu(udev->descriptor.idVendor)) { + case USB_VID_LEADTEK: af9015_properties[i].rc_key_map = af9015_rc_keys_leadtek; af9015_properties[i].rc_key_map_size = @@ -756,7 +756,7 @@ static int af9015_read_config(struct usb_device *udev) af9015_config.ir_table_size = ARRAY_SIZE(af9015_ir_table_leadtek); break; - case cpu_to_le16(USB_VID_VISIONPLUS): + case USB_VID_VISIONPLUS: if (udev->descriptor.idProduct == cpu_to_le16(USB_PID_AZUREWAVE_AD_TU700)) { af9015_properties[i].rc_key_map = @@ -769,7 +769,7 @@ static int af9015_read_config(struct usb_device *udev) ARRAY_SIZE(af9015_ir_table_twinhan); } break; - case cpu_to_le16(USB_VID_KWORLD_2): + case USB_VID_KWORLD_2: /* TODO: use correct rc keys */ af9015_properties[i].rc_key_map = af9015_rc_keys_twinhan; @@ -782,7 +782,7 @@ static int af9015_read_config(struct usb_device *udev) /* Check USB manufacturer and product strings and try to determine correct remote in case of chip vendor reference IDs are used. */ - case cpu_to_le16(USB_VID_AFATECH): + case USB_VID_AFATECH: memset(manufacturer, 0, sizeof(manufacturer)); usb_string(udev, udev->descriptor.iManufacturer, manufacturer, sizeof(manufacturer)); @@ -810,7 +810,7 @@ static int af9015_read_config(struct usb_device *udev) ARRAY_SIZE(af9015_ir_table_msi); } break; - case cpu_to_le16(USB_VID_AVERMEDIA): + case USB_VID_AVERMEDIA: af9015_properties[i].rc_key_map = af9015_rc_keys_avermedia; af9015_properties[i].rc_key_map_size = -- cgit v1.2.3 From 564d21054d1f61d9448a93b3fa8a254a29713d26 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 25 Nov 2008 09:07:00 -0200 Subject: fix boards for kernels with algo_control From: Mauro Carvalho Chehab changeset 4ecae6da8244 removed algo_control from i2c drivers. However, on older kernels, a dummy function to implement algo_control is required, otherwise, an OOPS is generated. This patch adds a backport for all i2c drivers that defines an i2c_algorithm, except for cafe_ccic, since OLPC hardware only works for kernels newer than 2.6.19. Some of the backported drivers would need also extra changes to work with older kernels, as specified on v4l/versions.txt. Yet, I decided to add the backport for those drivers also, since the lack of algo_control doesn't generate any compilation error, but it is enough to break the driver. So, better to all for all boards than to allow compiling a kernel backported that just generates OOPS. Priority: normal Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/af9005.c | 3 +++ linux/drivers/media/dvb/dvb-usb/af9015.c | 3 +++ linux/drivers/media/dvb/dvb-usb/anysee.c | 3 +++ linux/drivers/media/dvb/dvb-usb/au6610.c | 3 +++ linux/drivers/media/dvb/dvb-usb/cxusb.c | 3 +++ linux/drivers/media/dvb/dvb-usb/dib0700_core.c | 3 +++ linux/drivers/media/dvb/dvb-usb/dibusb-common.c | 3 +++ linux/drivers/media/dvb/dvb-usb/digitv.c | 3 +++ linux/drivers/media/dvb/dvb-usb/dtv5100.c | 3 +++ linux/drivers/media/dvb/dvb-usb/dw2102.c | 12 ++++++++++++ linux/drivers/media/dvb/dvb-usb/gl861.c | 3 +++ linux/drivers/media/dvb/dvb-usb/m920x.c | 3 +++ linux/drivers/media/dvb/dvb-usb/opera1.c | 3 +++ linux/drivers/media/dvb/dvb-usb/ttusb2.c | 3 +++ 14 files changed, 51 insertions(+) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/af9005.c b/linux/drivers/media/dvb/dvb-usb/af9005.c index ca5a0a4d2..fdf592625 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9005.c +++ b/linux/drivers/media/dvb/dvb-usb/af9005.c @@ -500,6 +500,9 @@ static u32 af9005_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm af9005_i2c_algo = { .master_xfer = af9005_i2c_xfer, .functionality = af9005_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c index e6e534e04..f0b57c739 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.c +++ b/linux/drivers/media/dvb/dvb-usb/af9015.c @@ -318,6 +318,9 @@ static u32 af9015_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm af9015_i2c_algo = { .master_xfer = af9015_i2c_xfer, .functionality = af9015_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c index cd2edbcaa..90a04266a 100644 --- a/linux/drivers/media/dvb/dvb-usb/anysee.c +++ b/linux/drivers/media/dvb/dvb-usb/anysee.c @@ -199,6 +199,9 @@ static u32 anysee_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm anysee_i2c_algo = { .master_xfer = anysee_master_xfer, .functionality = anysee_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static int anysee_mt352_demod_init(struct dvb_frontend *fe) diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index eb34cc389..b2400d693 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -119,6 +119,9 @@ static u32 au6610_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm au6610_i2c_algo = { .master_xfer = au6610_i2c_xfer, .functionality = au6610_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; /* Callbacks for DVB USB */ diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c index 406d7fba3..f467cad8a 100644 --- a/linux/drivers/media/dvb/dvb-usb/cxusb.c +++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c @@ -213,6 +213,9 @@ static u32 cxusb_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm cxusb_i2c_algo = { .master_xfer = cxusb_i2c_xfer, .functionality = cxusb_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c index 2fbb7049a..807bff0e1 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -252,6 +252,9 @@ static u32 dib0700_i2c_func(struct i2c_adapter *adapter) struct i2c_algorithm dib0700_i2c_algo = { .master_xfer = dib0700_i2c_xfer, .functionality = dib0700_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c index 8ee6cd4da..d774879df 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -155,6 +155,9 @@ static u32 dibusb_i2c_func(struct i2c_adapter *adapter) struct i2c_algorithm dibusb_i2c_algo = { .master_xfer = dibusb_i2c_xfer, .functionality = dibusb_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; EXPORT_SYMBOL(dibusb_i2c_algo); diff --git a/linux/drivers/media/dvb/dvb-usb/digitv.c b/linux/drivers/media/dvb/dvb-usb/digitv.c index b545cf3ea..3a560dcdd 100644 --- a/linux/drivers/media/dvb/dvb-usb/digitv.c +++ b/linux/drivers/media/dvb/dvb-usb/digitv.c @@ -83,6 +83,9 @@ static u32 digitv_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm digitv_i2c_algo = { .master_xfer = digitv_i2c_xfer, .functionality = digitv_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; /* Callbacks for DVB USB */ diff --git a/linux/drivers/media/dvb/dvb-usb/dtv5100.c b/linux/drivers/media/dvb/dvb-usb/dtv5100.c index 078ce92ca..e07a805f6 100644 --- a/linux/drivers/media/dvb/dvb-usb/dtv5100.c +++ b/linux/drivers/media/dvb/dvb-usb/dtv5100.c @@ -104,6 +104,9 @@ static u32 dtv5100_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm dtv5100_i2c_algo = { .master_xfer = dtv5100_i2c_xfer, .functionality = dtv5100_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; /* Callbacks for DVB USB */ diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c index bc5e47a2b..9b32c9c0a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dw2102.c +++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c @@ -368,21 +368,33 @@ static u32 dw210x_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm dw2102_i2c_algo = { .master_xfer = dw2102_i2c_transfer, .functionality = dw210x_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static struct i2c_algorithm dw2102_serit_i2c_algo = { .master_xfer = dw2102_serit_i2c_transfer, .functionality = dw210x_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static struct i2c_algorithm dw2102_earda_i2c_algo = { .master_xfer = dw2102_earda_i2c_transfer, .functionality = dw210x_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static struct i2c_algorithm dw2104_i2c_algo = { .master_xfer = dw2104_i2c_transfer, .functionality = dw210x_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) diff --git a/linux/drivers/media/dvb/dvb-usb/gl861.c b/linux/drivers/media/dvb/dvb-usb/gl861.c index 6f596ed41..41bec1b58 100644 --- a/linux/drivers/media/dvb/dvb-usb/gl861.c +++ b/linux/drivers/media/dvb/dvb-usb/gl861.c @@ -91,6 +91,9 @@ static u32 gl861_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm gl861_i2c_algo = { .master_xfer = gl861_i2c_xfer, .functionality = gl861_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; /* Callbacks for DVB USB */ diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c index 54626a0db..51c1c8dba 100644 --- a/linux/drivers/media/dvb/dvb-usb/m920x.c +++ b/linux/drivers/media/dvb/dvb-usb/m920x.c @@ -256,6 +256,9 @@ static u32 m920x_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm m920x_i2c_algo = { .master_xfer = m920x_i2c_xfer, .functionality = m920x_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; /* pid filter */ diff --git a/linux/drivers/media/dvb/dvb-usb/opera1.c b/linux/drivers/media/dvb/dvb-usb/opera1.c index cba064615..d45ceb83b 100644 --- a/linux/drivers/media/dvb/dvb-usb/opera1.c +++ b/linux/drivers/media/dvb/dvb-usb/opera1.c @@ -167,6 +167,9 @@ static u32 opera1_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm opera1_i2c_algo = { .master_xfer = opera1_i2c_xfer, .functionality = opera1_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) diff --git a/linux/drivers/media/dvb/dvb-usb/ttusb2.c b/linux/drivers/media/dvb/dvb-usb/ttusb2.c index e79a26473..849c59478 100644 --- a/linux/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/linux/drivers/media/dvb/dvb-usb/ttusb2.c @@ -124,6 +124,9 @@ static u32 ttusb2_i2c_func(struct i2c_adapter *adapter) static struct i2c_algorithm ttusb2_i2c_algo = { .master_xfer = ttusb2_i2c_xfer, .functionality = ttusb2_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif }; /* Callbacks for DVB USB */ -- cgit v1.2.3 From fd3e91675d5c7b8c8a82af7f8e3c5d706e458791 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Mon, 1 Dec 2008 10:51:14 +0100 Subject: dib0700: Stop repeating after user stops pushing button From: Devin Heitmueller A user noticed that there would continue to be 4-6 keypresses even after the user stopped holding down the button. This was because we were not reading the bulk pipe faster than the firmware was injecting information, which would result in a backlog. Make the query interval faster, and increase the number of cycles before we start repeating to compensate. Thanks to Knud Poulsen for pointing this out. Priority: high Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher --- linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index f28d3ae59..391732788 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) == NULL ? -ENODEV : 0; } -#define DEFAULT_RC_INTERVAL 150 +#define DEFAULT_RC_INTERVAL 50 static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ -#define RC_REPEAT_DELAY 2 -#define RC_REPEAT_DELAY_V1_20 5 +#define RC_REPEAT_DELAY 6 +#define RC_REPEAT_DELAY_V1_20 10 -- cgit v1.2.3 From e9548d6c7e62b32a90ad51b519844be602571b9d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 4 Dec 2008 15:49:23 +0000 Subject: Fix stv0299 support in dw2102 USB DVB-S/S2 driver From: Igor M. Liplianin register 0x00 contains 0xa1 for STV0299 and STV0299B register 0x00 might contain 0x80 when returning from standby Signed-off-by: Igor M. Liplianin Acked-by: Sergey Silkin Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/dw2102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c index 9b32c9c0a..2b8ee587b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dw2102.c +++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c @@ -672,7 +672,7 @@ static int dw2102_load_firmware(struct usb_device *dev, /* check STV0299 frontend */ dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, DW210X_READ_MSG); - if (reset16[0] == 0xa1) { + if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) { dw2102_properties.i2c_algo = &dw2102_i2c_algo; dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach; break; -- cgit v1.2.3 From 1e115775994e75b023a2b0a53fecb75bb949cc95 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 16 Dec 2008 16:25:46 -0200 Subject: Revert changeset 9886 From: Mauro Carvalho Chehab Changeset 9886 were applied by mistake, reverting changeset 9885, that got a wrong comment. Let's revert it. Priority: normal Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Kconfig | 46 ++++++++++++++++----------------- 1 file changed, 23 insertions(+), 23 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 62b68c291..49f7b20c2 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -24,8 +24,8 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-B demodulator. @@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-C/P demodulator. @@ -73,11 +73,11 @@ config DVB_USB_DIB0700 select DVB_DIB7000M select DVB_DIB3000MC select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select DVB_TUNER_DIB0070 + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB @@ -95,7 +95,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -107,11 +107,11 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -124,9 +124,9 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -137,7 +137,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -146,7 +146,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -235,8 +235,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) @@ -284,7 +284,7 @@ config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. @@ -293,9 +293,9 @@ config DVB_USB_AF9015 depends on DVB_USB && EXPERIMENTAL select DVB_AF9013 select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver -- cgit v1.2.3 From 162b73a47b547cad436989665074bcb093d71c57 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 20 Dec 2008 07:03:06 -0800 Subject: Convert GP8PSK module to use S2API From: Alan Nisota This patch converts the gp8psk module to use the S2API. It pretends to be DVB-S2 capable in order to allow the various supported modulations (8PSK, QPSK-Turbo, etc), and keep software compatibility with the S2API patches for Mythtv and VDR. Signed-off by: Alan Nisota Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c | 140 ++++++++++++++++++++++------ linux/drivers/media/dvb/dvb-usb/gp8psk.c | 2 - linux/drivers/media/dvb/dvb-usb/gp8psk.h | 1 + 3 files changed, 115 insertions(+), 28 deletions(-) (limited to 'linux/drivers/media/dvb/dvb-usb') diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c index 262a858c3..20eadf931 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -25,6 +25,20 @@ struct gp8psk_fe_state { unsigned long status_check_interval; }; +static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 status; + gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1); + return status & bmDCtuned; +} + +static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) +{ + struct gp8psk_fe_state *state = fe->demodulator_priv; + return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0); +} + static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) { u8 buf[6]; @@ -99,39 +113,114 @@ static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_front return 0; } +static int gp8psk_fe_set_property(struct dvb_frontend *fe, + struct dtv_property *tvp) +{ + deb_fe("%s(..)\n", __func__); + return 0; +} + +static int gp8psk_fe_get_property(struct dvb_frontend *fe, + struct dtv_property *tvp) +{ + deb_fe("%s(..)\n", __func__); + return 0; +} + + static int gp8psk_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { struct gp8psk_fe_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; u8 cmd[10]; u32 freq = fep->frequency * 1000; + int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct); + + deb_fe("%s()\n", __func__); cmd[4] = freq & 0xff; cmd[5] = (freq >> 8) & 0xff; cmd[6] = (freq >> 16) & 0xff; cmd[7] = (freq >> 24) & 0xff; - switch(fe->ops.info.type) { - case FE_QPSK: - cmd[0] = fep->u.qpsk.symbol_rate & 0xff; - cmd[1] = (fep->u.qpsk.symbol_rate >> 8) & 0xff; - cmd[2] = (fep->u.qpsk.symbol_rate >> 16) & 0xff; - cmd[3] = (fep->u.qpsk.symbol_rate >> 24) & 0xff; - cmd[8] = ADV_MOD_DVB_QPSK; - cmd[9] = 0x03; /*ADV_MOD_FEC_XXX*/ + switch (c->delivery_system) { + case SYS_DVBS: + /* Only QPSK is supported for DVB-S */ + if (c->modulation != QPSK) { + deb_fe("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + c->fec_inner = FEC_AUTO; break; + case SYS_DVBS2: + deb_fe("%s: DVB-S2 delivery system selected\n", __func__); + break; + default: - // other modes are unsuported right now - cmd[0] = 0; - cmd[1] = 0; - cmd[2] = 0; - cmd[3] = 0; - cmd[8] = 0; + deb_fe("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + cmd[0] = c->symbol_rate & 0xff; + cmd[1] = (c->symbol_rate >> 8) & 0xff; + cmd[2] = (c->symbol_rate >> 16) & 0xff; + cmd[3] = (c->symbol_rate >> 24) & 0xff; + switch (c->modulation) { + case QPSK: + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (gp8psk_tuned_to_DCII(fe)) + gp8psk_bcm4500_reload(state->d); + switch (c->fec_inner) { + case FEC_1_2: + cmd[9] = 0; break; + case FEC_2_3: + cmd[9] = 1; break; + case FEC_3_4: + cmd[9] = 2; break; + case FEC_5_6: + cmd[9] = 3; break; + case FEC_7_8: + cmd[9] = 4; break; + case FEC_AUTO: + cmd[9] = 5; break; + default: + cmd[9] = 5; break; + } + cmd[8] = ADV_MOD_DVB_QPSK; + break; + case PSK_8: /* PSK_8 is for compatibility with DN */ + cmd[8] = ADV_MOD_TURBO_8PSK; + switch (c->fec_inner) { + case FEC_2_3: + cmd[9] = 0; break; + case FEC_3_4: + cmd[9] = 1; break; + case FEC_3_5: + cmd[9] = 2; break; + case FEC_5_6: + cmd[9] = 3; break; + case FEC_8_9: + cmd[9] = 4; break; + default: + cmd[9] = 0; break; + } + break; + case QAM_16: /* QAM_16 is for compatibility with DN */ + cmd[8] = ADV_MOD_TURBO_16QAM; cmd[9] = 0; break; + default: /* Unknown modulation */ + deb_fe("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; } - gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10); + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + gp8psk_set_tuner_mode(fe, 0); + gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10); state->lock = 0; state->next_status_check = jiffies; @@ -140,13 +229,6 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend* fe, return 0; } -static int gp8psk_fe_get_frontend(struct dvb_frontend* fe, - struct dvb_frontend_parameters *fep) -{ - return 0; -} - - static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *m) { @@ -261,9 +343,13 @@ static struct dvb_frontend_ops gp8psk_fe_ops = { .symbol_rate_max = 45000000, .symbol_rate_tolerance = 500, /* ppm */ .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + /* + * FE_CAN_QAM_16 is for compatibility + * (Myth incorrectly detects Turbo-QPSK as plain QAM-16) + */ + FE_CAN_QPSK | FE_CAN_QAM_16 }, .release = gp8psk_fe_release, @@ -271,8 +357,10 @@ static struct dvb_frontend_ops gp8psk_fe_ops = { .init = NULL, .sleep = NULL, + .set_property = gp8psk_fe_set_property, + .get_property = gp8psk_fe_get_property, .set_frontend = gp8psk_fe_set_frontend, - .get_frontend = gp8psk_fe_get_frontend, + .get_tune_settings = gp8psk_fe_get_tune_settings, .read_status = gp8psk_fe_read_status, diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index 1b002909b..c1da962cc 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -174,7 +174,6 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) return 0; } -#if 0 int gp8psk_bcm4500_reload(struct dvb_usb_device *d) { u8 buf; @@ -191,7 +190,6 @@ int gp8psk_bcm4500_reload(struct dvb_usb_device *d) return EINVAL; return 0; } -#endif /* 0 */ static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.h b/linux/drivers/media/dvb/dvb-usb/gp8psk.h index e5cd8149c..e83a57506 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.h +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.h @@ -92,5 +92,6 @@ extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); +extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); #endif -- cgit v1.2.3