From ab606a3833ef0453fe62bec44913375f5480cddc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 22 Jun 2008 14:19:39 +0000 Subject: WRITE_RPS1() converts to le32 itself From: Al Viro ... but two ancient drivers had not noticed. Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/ttpci/budget-patch.c | 44 ++++++++++++++-------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'linux/drivers/media/dvb/ttpci/budget-patch.c') diff --git a/linux/drivers/media/dvb/ttpci/budget-patch.c b/linux/drivers/media/dvb/ttpci/budget-patch.c index eb411ed3a..5139b481e 100644 --- a/linux/drivers/media/dvb/ttpci/budget-patch.c +++ b/linux/drivers/media/dvb/ttpci/budget-patch.c @@ -431,22 +431,22 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // in budget patch GPIO3 is connected to VSYNC_B count = 0; #if 0 /* keep */ - WRITE_RPS1(cpu_to_le32(CMD_UPLOAD | - MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 )); + WRITE_RPS1(CMD_UPLOAD | + MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ); #endif - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B)); - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(CMD_PAUSE | EVT_VBI_B); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); #if RPS_IRQ // issue RPS1 interrupt to increment counter - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); // at least a NOP is neede between two interrupts - WRITE_RPS1(cpu_to_le32(CMD_NOP)); + WRITE_RPS1(CMD_NOP); // interrupt again - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif - WRITE_RPS1(cpu_to_le32(CMD_STOP)); + WRITE_RPS1(CMD_STOP); #if RPS_IRQ // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) @@ -558,28 +558,28 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // Wait Source Line Counter Threshold (p36) - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS)); + WRITE_RPS1(CMD_PAUSE | EVT_HS); // Set GPIO3=1 (p42) - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24)); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTHI<<24); #if RPS_IRQ // issue RPS1 interrupt - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif // Wait reset Source Line Counter Threshold (p36) - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS)); + WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS); // Set GPIO3=0 (p42) - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); #if RPS_IRQ // issue RPS1 interrupt - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif // Jump to begin of RPS program (p37) - WRITE_RPS1(cpu_to_le32(CMD_JUMP)); - WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); // Fix VSYNC level saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); -- cgit v1.2.3