From 0ad66f1386efdd0d37a22784b647c266bfe6110a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 25 Aug 2005 18:15:24 +0000 Subject: This fix has also been applied to lgdt330x. There is an optimization that keeps track of the frequency tuned by the digital decoder. The digital driver does not set the frequency if it has not changed since it was tuned. The analog tuner driver knows nothing about the frequency saved by the digital driver. When the frequency is set using the video4linux code with tvtime, the hardware get changed but the digital driver's state does not get updated. Switch back to the same digital channel and the driver finds no change in frequency so the tuner is not reset to the digital frequency. The work around is to remove the check and always set the tuner to the specified frequency. Signed-off-by: Mac Michaels Signed-off-by: Michael Krufky --- linux/drivers/media/dvb/frontends/or51132.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) (limited to 'linux/drivers/media/dvb') diff --git a/linux/drivers/media/dvb/frontends/or51132.c b/linux/drivers/media/dvb/frontends/or51132.c index cc0a77c79..b6d0eecc5 100644 --- a/linux/drivers/media/dvb/frontends/or51132.c +++ b/linux/drivers/media/dvb/frontends/or51132.c @@ -370,22 +370,19 @@ static int or51132_set_parameters(struct dvb_frontend* fe, or51132_setmode(fe); } - /* Change only if we are actually changing the channel */ - if (state->current_frequency != param->frequency) { - dvb_pll_configure(state->config->pll_desc, buf, - param->frequency, 0); - dprintk("set_parameters tuner bytes: 0x%02x 0x%02x " - "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]); - if (i2c_writebytes(state, state->config->pll_address ,buf, 4)) - printk(KERN_WARNING "or51132: set_parameters error " - "writing to tuner\n"); - - /* Set to current mode */ - or51132_setmode(fe); - - /* Update current frequency */ - state->current_frequency = param->frequency; - } + dvb_pll_configure(state->config->pll_desc, buf, + param->frequency, 0); + dprintk("set_parameters tuner bytes: 0x%02x 0x%02x " + "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]); + if (i2c_writebytes(state, state->config->pll_address ,buf, 4)) + printk(KERN_WARNING "or51132: set_parameters error " + "writing to tuner\n"); + + /* Set to current mode */ + or51132_setmode(fe); + + /* Update current frequency */ + state->current_frequency = param->frequency; return 0; } -- cgit v1.2.3