From 3165ca2068855d7118d78396adce4c49a4e7f636 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Mon, 4 May 2009 20:43:02 -0400
Subject: dvb_frontend: fix race condition resulting in dropped tuning commands

From: Devin Heitmueller <dheitmueller@kernellabs.com>

A race condition was detected in the case that putting the tuner to sleep takes
an unusually long period of time, combined with applications that quickly
close/open the dvb frontend.

The kaffeine channel scanner closes and reopens the dvb frontend between each
tuning attempt.  If it takes an unusually longer period of time to put the
tuner to sleep (for example, the Pinnacle 801e takes 660 ms), the dvb_frontend
thread will still be in a running state (and hence fepriv->thread is still set)
but the fepriv->exit field will still be zero.  As a result, if a
dvb_frontend_start() call arrives while the frontend thread is in the process
of terminating, the call will return 0 without actually starting a new thread.
This results in the tuning request being dropped.

To address this, mark fepriv->exit as soon as we know the thread is going to
be terminated, so that dvb_frontend_start() knows to start a new instance.

Problem encountered with Kaffeine 0.8.7 doing ATSC scanning against the
Pinnacle 801e tuner, in conjunction with new code to power down the xc5000
when not in use.

Priority: normal

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
---
 linux/drivers/media/dvb/dvb-core/dvb_frontend.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
index da2890b22..d359f6841 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -554,6 +554,7 @@ restart:
 
 		if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) {
 			/* got signal or quitting */
+			fepriv->exit = 1;
 			break;
 		}
 
-- 
cgit v1.2.3


From 8daa6a71db80a0910916ffe840d4c9dc520e1310 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Mon, 4 May 2009 20:57:41 -0400
Subject: dib0700: reduce xc5000 sleep time for Pinnacle 801e to 10ms

From: Devin Heitmueller <dheitmueller@kernellabs.com>

According to the xc5000 spec, the reset pin only needs to be held low for 10ms.

Priority: normal

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
---
 linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
index e39993df0..ac97b9f42 100644
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1346,9 +1346,9 @@ static int dib0700_xc5000_tuner_callback(void *priv, int component,
 	if (command == XC5000_TUNER_RESET) {
 		/* Reset the tuner */
 		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
-		msleep(330); /* from Windows USB trace */
+		msleep(10);
 		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
-		msleep(330); /* from Windows USB trace */
+		msleep(10);
 	} else {
 		err("xc5000: unknown tuner callback command: %d\n", command);
 		return -EINVAL;
-- 
cgit v1.2.3


From 77cae28861d7b7a3542ae1d487c8ac43245811e0 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Wed, 20 May 2009 09:57:10 +0200
Subject: Reducing print-level of I2C error prints

From: Matthias Schwarzott <zzam@gentoo.org>

Reducing the print-levle of I2C error prints cleans some unwanted but
unavoidable errors from default syslog-level.

Priority: normal

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
---
 linux/drivers/media/dvb/b2c2/flexcop-i2c.c | 2 +-
 linux/drivers/media/dvb/frontends/mt312.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-i2c.c b/linux/drivers/media/dvb/b2c2/flexcop-i2c.c
index 06a90f67e..df4d6e8d9 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -200,7 +200,7 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap,
 					msgs[i].buf[0], &msgs[i].buf[1],
 					msgs[i].len - 1);
 		if (ret < 0) {
-			err("i2c master_xfer failed");
+			deb_i2c("i2c master_xfer failed");
 			break;
 		}
 	}
diff --git a/linux/drivers/media/dvb/frontends/mt312.c b/linux/drivers/media/dvb/frontends/mt312.c
index 5ac9b1592..a621f7279 100644
--- a/linux/drivers/media/dvb/frontends/mt312.c
+++ b/linux/drivers/media/dvb/frontends/mt312.c
@@ -77,7 +77,7 @@ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
 	ret = i2c_transfer(state->i2c, msg, 2);
 
 	if (ret != 2) {
-		printk(KERN_ERR "%s: ret == %d\n", __func__, ret);
+		printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
 		return -EREMOTEIO;
 	}
 
-- 
cgit v1.2.3


From f947fc2a2490cb5bec7d536e4d7ab98b24e3e333 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Wed, 20 May 2009 10:08:26 +0200
Subject: Rewrote frontend-attach mechanism to gain noise-less deactivation of
 submodules

From: Patrick Boettcher <pb@linuxtv.org>

This patch is reorganizing the frontend-attach mechanism in order to
gain noise-less (superflous prints) deactivation of submodules.

Credits go to Uwe Bugla for helping to clean and test the code.

Priority: normal

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
---
 linux/drivers/media/dvb/b2c2/flexcop-common.h   |   8 +-
 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 760 +++++++++++++-----------
 2 files changed, 413 insertions(+), 355 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-common.h b/linux/drivers/media/dvb/b2c2/flexcop-common.h
index cee2956cb..9d66105d3 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/linux/drivers/media/dvb/b2c2/flexcop-common.h
@@ -1,9 +1,7 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-common.h - common header file for device-specific source files also.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-common.h - common header file for device-specific source files
+ * see flexcop.c for copyright information
  */
 #ifndef __FLEXCOP_COMMON_H__
 #define __FLEXCOP_COMMON_H__
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index f7afab594..3f485bf13 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -1,34 +1,27 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
+ * see flexcop.c for copyright information
  */
 #include <media/tuner.h>
-
 #include "flexcop.h"
-
-#include "stv0299.h"
-#include "mt352.h"
-#include "nxt200x.h"
-#include "bcm3510.h"
-#include "stv0297.h"
 #include "mt312.h"
-#include "lgdt330x.h"
-#include "dvb-pll.h"
-#include "tuner-simple.h"
-
+#include "stv0299.h"
 #include "s5h1420.h"
 #include "itd1000.h"
-
-#include "cx24123.h"
 #include "cx24113.h"
-
+#include "cx24123.h"
 #include "isl6421.h"
+#include "mt352.h"
+#include "bcm3510.h"
+#include "nxt200x.h"
+#include "dvb-pll.h"
+#include "lgdt330x.h"
+#include "tuner-simple.h"
+#include "stv0297.h"
 
 /* lnb control */
-
+#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -37,65 +30,62 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 
 	v = fc->read_ibi_reg(fc, misc_204);
 	switch (voltage) {
-		case SEC_VOLTAGE_OFF:
-			v.misc_204.ACPI1_sig = 1;
-			break;
-		case SEC_VOLTAGE_13:
-			v.misc_204.ACPI1_sig = 0;
-			v.misc_204.LNB_L_H_sig = 0;
-			break;
-		case SEC_VOLTAGE_18:
-			v.misc_204.ACPI1_sig = 0;
-			v.misc_204.LNB_L_H_sig = 1;
-			break;
-		default:
-			err("unknown SEC_VOLTAGE value");
-			return -EINVAL;
+	case SEC_VOLTAGE_OFF:
+		v.misc_204.ACPI1_sig = 1;
+		break;
+	case SEC_VOLTAGE_13:
+		v.misc_204.ACPI1_sig = 0;
+		v.misc_204.LNB_L_H_sig = 0;
+		break;
+	case SEC_VOLTAGE_18:
+		v.misc_204.ACPI1_sig = 0;
+		v.misc_204.LNB_L_H_sig = 1;
+		break;
+	default:
+		err("unknown SEC_VOLTAGE value");
+		return -EINVAL;
 	}
 	return fc->write_ibi_reg(fc, misc_204, v);
 }
+#endif
 
+#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
+	|| defined(CONFIG_DVB_MT312_MODULE)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
-/*	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
-
 	if (fc->fe_sleep)
 		return fc->fe_sleep(fe);
-
-/*	v.misc_204.ACPI3_sig = 1;
-	fc->write_ibi_reg(fc,misc_204,v);*/
-
 	return 0;
 }
+#endif
 
+/* SkyStar2 DVB-S rev 2.3 */
+#if defined(CONFIG_DVB_MT312_MODULE)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
-	/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
 	struct flexcop_device *fc = fe->dvb->priv;
 	flexcop_ibi_value v;
 	u16 ax;
 	v.raw = 0;
-
 	deb_tuner("tone = %u\n",tone);
 
 	switch (tone) {
-		case SEC_TONE_ON:
-			ax = 0x01ff;
-			break;
-		case SEC_TONE_OFF:
-			ax = 0;
-			break;
-		default:
-			err("unknown SEC_TONE value");
-			return -EINVAL;
+	case SEC_TONE_ON:
+		ax = 0x01ff;
+		break;
+	case SEC_TONE_OFF:
+		ax = 0;
+		break;
+	default:
+		err("unknown SEC_TONE value");
+		return -EINVAL;
 	}
 
 	v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
-
 	v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
 	v.lnb_switch_freq_200.LNB_CTLLowCount_sig  = ax == 0 ? 0x1ff : ax;
-
 	return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
 }
 
@@ -110,17 +100,16 @@ static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
 {
 	int i, par = 1, d;
-
 	for (i = 7; i >= 0; i--) {
 		d = (data >> i) & 1;
 		par ^= d;
 		flexcop_diseqc_send_bit(fe, d);
 	}
-
 	flexcop_diseqc_send_bit(fe, par);
 }
 
-static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+static int flexcop_send_diseqc_msg(struct dvb_frontend *fe,
+	int len, u8 *msg, unsigned long burst)
 {
 	int i;
 
@@ -129,7 +118,6 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 
 	for (i = 0; i < len; i++)
 		flexcop_diseqc_send_byte(fe,msg[i]);
-
 	mdelay(16);
 
 	if (burst != -1) {
@@ -146,50 +134,110 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 	return 0;
 }
 
-static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe,
+	struct dvb_diseqc_master_cmd *cmd)
 {
 	return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
 }
 
-static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+static int flexcop_diseqc_send_burst(struct dvb_frontend *fe,
+	fe_sec_mini_cmd_t minicmd)
 {
 	return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
 }
 
-/* dvb-s stv0299 */
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+	.demod_address = 0x0e,
+};
+
+static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
+{
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
+	.len = sizeof(buf) };
+	struct flexcop_device *fc = fe->dvb->priv;
+	div = (params->frequency + (125/2)) / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = (div >> 0) & 0xff;
+	buf[2] = 0x84 | ((div >> 10) & 0x60);
+	buf[3] = 0x80;
+
+	if (params->frequency < 1550000)
+		buf[3] |= 0x02;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static void skystar2_rev23_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(mt312_attach,
+			&skystar23_samsung_tbdu18132_config, i2c);
+	if (fc->fe != NULL) {
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
+		ops->tuner_ops.set_params \
+			= skystar23_samsung_tbdu18132_tuner_set_params;
+		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+		ops->set_tone               = flexcop_set_tone;
+		ops->set_voltage            = flexcop_set_voltage;
+		fc->fe_sleep                = ops->sleep;
+		ops->sleep                  = flexcop_sleep;
+		fc->dev_type                = FC_SKY_REV23;
+	}
+}
+#endif
+
+/* SkyStar2 DVB-S rev 2.6 */
+#if defined(CONFIG_DVB_STV0299_MODULE)
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
+	u32 srate, u32 ratio)
 {
 	u8 aclk = 0;
 	u8 bclk = 0;
 
-	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg (fe, 0x13, aclk);
-	stv0299_writereg (fe, 0x14, bclk);
-	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
+	if (srate < 1500000) {
+		aclk = 0xb7; bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7; bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7; bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7; bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6; bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4; bclk = 0x51;
+	}
 
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21,  ratio        & 0xf0);
 	return 0;
 }
 
-static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
+static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
 {
 	u8 buf[4];
 	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	struct i2c_msg msg = {
+	.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
 	struct flexcop_device *fc = fe->dvb->priv;
-
 	div = params->frequency / 125;
 
 	buf[0] = (div >> 8) & 0x7f;
 	buf[1] = div & 0xff;
-	buf[2] = 0x84;  /* 0xC4 */
+	buf[2] = 0x84; /* 0xC4 */
 	buf[3] = 0x08;
 
 	if (params->frequency < 1500000)
@@ -203,48 +251,48 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv
 }
 
 static u8 samsung_tbmu24112_inittab[] = {
-	     0x01, 0x15,
-	     0x02, 0x30,
-	     0x03, 0x00,
-	     0x04, 0x7D,
-	     0x05, 0x35,
-	     0x06, 0x02,
-	     0x07, 0x00,
-	     0x08, 0xC3,
-	     0x0C, 0x00,
-	     0x0D, 0x81,
-	     0x0E, 0x23,
-	     0x0F, 0x12,
-	     0x10, 0x7E,
-	     0x11, 0x84,
-	     0x12, 0xB9,
-	     0x13, 0x88,
-	     0x14, 0x89,
-	     0x15, 0xC9,
-	     0x16, 0x00,
-	     0x17, 0x5C,
-	     0x18, 0x00,
-	     0x19, 0x00,
-	     0x1A, 0x00,
-	     0x1C, 0x00,
-	     0x1D, 0x00,
-	     0x1E, 0x00,
-	     0x1F, 0x3A,
-	     0x20, 0x2E,
-	     0x21, 0x80,
-	     0x22, 0xFF,
-	     0x23, 0xC1,
-	     0x28, 0x00,
-	     0x29, 0x1E,
-	     0x2A, 0x14,
-	     0x2B, 0x0F,
-	     0x2C, 0x09,
-	     0x2D, 0x05,
-	     0x31, 0x1F,
-	     0x32, 0x19,
-	     0x33, 0xFE,
-	     0x34, 0x93,
-	     0xff, 0xff,
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7D,
+	0x05, 0x35,
+	0x06, 0x02,
+	0x07, 0x00,
+	0x08, 0xC3,
+	0x0C, 0x00,
+	0x0D, 0x81,
+	0x0E, 0x23,
+	0x0F, 0x12,
+	0x10, 0x7E,
+	0x11, 0x84,
+	0x12, 0xB9,
+	0x13, 0x88,
+	0x14, 0x89,
+	0x15, 0xC9,
+	0x16, 0x00,
+	0x17, 0x5C,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1A, 0x00,
+	0x1C, 0x00,
+	0x1D, 0x00,
+	0x1E, 0x00,
+	0x1F, 0x3A,
+	0x20, 0x2E,
+	0x21, 0x80,
+	0x22, 0xFF,
+	0x23, 0xC1,
+	0x28, 0x00,
+	0x29, 0x1E,
+	0x2A, 0x14,
+	0x2B, 0x0F,
+	0x2C, 0x09,
+	0x2D, 0x05,
+	0x31, 0x1F,
+	0x32, 0x19,
+	0x33, 0xFE,
+	0x34, 0x93,
+	0xff, 0xff,
 };
 
 static struct stv0299_config samsung_tbmu24112_config = {
@@ -259,27 +307,136 @@ static struct stv0299_config samsung_tbmu24112_config = {
 	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
 };
 
-/* dvb-t mt352 */
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+static void skystar2_rev26_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
 {
-	static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
+	if (fc->fe != NULL) {
+		struct dvb_frontend_ops *ops  = &fc->fe->ops;
+		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
+		ops->set_voltage = flexcop_set_voltage;
+		fc->fe_sleep = ops->sleep;
+		ops->sleep = flexcop_sleep;
+	}
+}
+#endif
+
+/* SkyStar2 DVB-S rev 2.7 */
+#if defined(CONFIG_DVB_S5H1420_MODULE)
+static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
+	.demod_address = 0x53,
+	.invert = 1,
+	.repeated_start_workaround = 1,
+	.serial_mpeg = 1,
+};
+
+static struct itd1000_config skystar2_rev2_7_itd1000_config = {
+	.i2c_address = 0x61,
+};
+
+static void skystar2_rev27_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	/* enable no_base_addr - no repeated start when reading */
+	fc->fc_i2c_adap[0].no_base_addr = 1;
+	fc->fe = dvb_attach(s5h1420_attach,
+		&skystar2_rev2_7_s5h1420_config, i2c);
+	if (fc->fe != NULL) {
+		flexcop_ibi_value r108;
+		struct i2c_adapter *i2c_tuner \
+		= s5h1420_get_tuner_i2c_adapter(fc->fe);
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
+
+		fc->fe_sleep = ops->sleep;
+		ops->sleep   = flexcop_sleep;
+
+		/* enable no_base_addr - no repeated start when reading */
+		fc->fc_i2c_adap[2].no_base_addr = 1;
+		if (dvb_attach(isl6421_attach, fc->fe,
+			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
+			err("ISL6421 could NOT be attached");
+		else
+			info("ISL6421 successfully attached");
+
+		/* the ITD1000 requires a lower i2c clock - is it a problem ? */
+		r108.raw = 0x00000506;
+		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
+		if (i2c_tuner) {
+			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
+				&skystar2_rev2_7_itd1000_config) == NULL)
+				err("ITD1000 could NOT be attached");
+			else
+				info("ITD1000 successfully attached");
+		}
+	} else
+		fc->fc_i2c_adap[0].no_base_addr = 0;
+		/* for the next devices we need it again */
+}
+#endif
+
+/* SkyStar2 rev 2.8 */
+#if defined(CONFIG_DVB_CX24123_MODULE)
+static struct cx24123_config skystar2_rev2_8_cx24123_config = {
+	.demod_address = 0x55,
+	.dont_use_pll = 1,
+	.agc_callback = cx24113_agc_callback,
+};
+
+static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
+	.i2c_addr = 0x54,
+	.xtal_khz = 10111,
+};
+
+static void skystar2_rev28_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(cx24123_attach,
+			&skystar2_rev2_8_cx24123_config, i2c);
+	if (fc->fe != NULL) {
+		struct i2c_adapter *i2c_tuner \
+			= cx24123_get_tuner_i2c_adapter(fc->fe);
+		if (i2c_tuner != NULL) {
+			if (dvb_attach(cx24113_attach, fc->fe,
+						&skystar2_rev2_8_cx24113_config,
+						i2c_tuner) == NULL)
+				err("CX24113 could NOT be attached");
+			else
+				info("CX24113 successfully attached");
+		}
+
+		fc->fc_i2c_adap[2].no_base_addr = 1;
+		if (dvb_attach(isl6421_attach, fc->fe,
+			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
+			err("ISL6421 could NOT be attached");
+		else
+			info("ISL6421 successfully attached");
+	/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
+	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
+	}
+}
+#endif
+
+/* AirStar DVB-T */
+#if defined(CONFIG_DVB_MT352_MODULE)
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
+{
+	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
+	static u8 mt352_reset[] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 };
 	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
 
 	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
 	udelay(2000);
 	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
 	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
 	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
 	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
 	return 0;
 }
 
-static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
+static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
 {
 	u32 div;
 	unsigned char bs = 0;
@@ -287,19 +444,20 @@ static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_fro
 	if (buf_len < 5)
 		return -EINVAL;
 
-	#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
+#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
 	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
-	if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
-	if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+	if (params->frequency >= 48000000 && params->frequency <= 154000000) \
+		bs = 0x09;
+	if (params->frequency >= 161000000 && params->frequency <= 439000000) \
+		bs = 0x0a;
+	if (params->frequency >= 447000000 && params->frequency <= 863000000) \
+		bs = 0x08;
 
 	pllbuf[0] = 0x61;
 	pllbuf[1] = div >> 8;
 	pllbuf[2] = div & 0xff;
 	pllbuf[3] = 0xcc;
 	pllbuf[4] = bs;
-
 	return 5;
 }
 
@@ -308,70 +466,88 @@ static struct mt352_config samsung_tdtc9251dh0_config = {
 	.demod_init    = samsung_tdtc9251dh0_demod_init,
 };
 
-static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+static void airstar_dvbt_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
+	if (fc->fe != NULL)
+		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
+}
+#endif
+
+/* AirStar ATSC 1st generation */
+#if defined(CONFIG_DVB_BCM3510_MODULE)
+static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
+	const struct firmware **fw, char* name)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
 	return request_firmware(fw, name, fc->dev);
 }
 
-static struct lgdt330x_config air2pc_atsc_hd5000_config = {
-	.demod_address       = 0x59,
-	.demod_chip          = LGDT3303,
-	.serial_mpeg         = 0x04,
-	.clock_polarity_flip = 1,
-};
-
-static struct nxt200x_config samsung_tbmv_config = {
-	.demod_address    = 0x0a,
-};
-
 static struct bcm3510_config air2pc_atsc_first_gen_config = {
 	.demod_address    = 0x0f,
 	.request_firmware = flexcop_fe_request_firmware,
 };
 
-static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
+static void airstar_atsc1_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
 {
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-
-	div = (params->frequency + (125/2)) / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-	buf[2] = 0x84 | ((div >> 10) & 0x60);
-	buf[3] = 0x80;
+	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
+}
+#endif
 
-	if (params->frequency < 1550000)
-		buf[3] |= 0x02;
+/* AirStar ATSC 2nd generation */
+#if defined(CONFIG_DVB_NXT200X_MODULE)
+static struct nxt200x_config samsung_tbmv_config = {
+	.demod_address = 0x0a,
+};
 
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
+static void airstar_atsc2_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
+	if (fc->fe != NULL)
+		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+				DVB_PLL_SAMSUNG_TBMV);
 }
+#endif
 
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
-
-	.demod_address = 0x0e,
+/* AirStar ATSC 3rd generation */
+#if defined(CONFIG_DVB_LGDT330X_MODULE)
+static struct lgdt330x_config air2pc_atsc_hd5000_config = {
+	.demod_address       = 0x59,
+	.demod_chip          = LGDT3303,
+	.serial_mpeg         = 0x04,
+	.clock_polarity_flip = 1,
 };
 
+static void airstar_atsc3_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
+	if (fc->fe != NULL) {
+		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
+				TUNER_LG_TDVS_H06XF);
+	}
+}
+#endif
+
+/* CableStar2 DVB-C */
+#if defined(CONFIG_DVB_STV0297_MODULE)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
-					       struct dvb_frontend_parameters *fep)
+		struct dvb_frontend_parameters *fep)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
 	u8 buf[4];
 	u16 div;
 	int ret;
 
-/*  62.5 kHz * 10 */
+/* 62.5 kHz * 10 */
 #define REF_FREQ    625
 #define FREQ_OFFSET 36125
 
-	div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10)  / REF_FREQ; // 4 MHz = 4000 KHz
+	div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
+/* 4 MHz = 4000 KHz */
 
 	buf[0] = (u8)( div >> 8) & 0x7f;
 	buf[1] = (u8)        div & 0xff;
@@ -384,11 +560,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
  * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
 	buf[2] = 0x95;
 
-// Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
-//  47 - 153   0  *  0   0   0   0   0   1   0x01
-// 153 - 430   0  *  0   0   0   0   1   0   0x02
-// 430 - 822   0  *  0   0   1   0   0   0   0x08
-// 822 - 862   1  *  0   0   1   0   0   0   0x88
+/* Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
+ *  47 - 153   0  *  0   0   0   0   0   1   0x01
+ * 153 - 430   0  *  0   0   0   0   1   0   0x02
+ * 430 - 822   0  *  0   0   1   0   0   0   0x08
+ * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
 
 	     if (fep->frequency <= 153000000) buf[3] = 0x01;
 	else if (fep->frequency <= 430000000) buf[3] = 0x02;
@@ -397,11 +573,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
 
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
-	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
+	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
+	buf[0], buf[1], buf[2], buf[3]);
 	ret = fc->i2c_request(&fc->fc_i2c_adap[2],
-		FC_WRITE, 0x61, buf[0], &buf[1], 3);
+			FC_WRITE, 0x61, buf[0], &buf[1], 3);
 	deb_tuner("tuner write returned: %d\n",ret);
-
 	return ret;
 }
 
@@ -481,190 +657,75 @@ static u8 alps_tdee4_stv0297_inittab[] = {
 static struct stv0297_config alps_tdee4_stv0297_config = {
 	.demod_address = 0x1c,
 	.inittab = alps_tdee4_stv0297_inittab,
-//	.invert = 1,
-//	.pll_set = alps_tdee4_stv0297_pll_set,
 };
 
-
-/* SkyStar2 rev2.7 (a/u) */
-static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
-	.demod_address = 0x53,
-	.invert = 1,
-	.repeated_start_workaround = 1,
-	.serial_mpeg = 1,
-};
-
-static struct itd1000_config skystar2_rev2_7_itd1000_config = {
-	.i2c_address = 0x61,
-};
-
-/* SkyStar2 rev2.8 */
-static struct cx24123_config skystar2_rev2_8_cx24123_config = {
-	.demod_address = 0x55,
-	.dont_use_pll = 1,
-	.agc_callback = cx24113_agc_callback,
-};
-
-static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
-	.i2c_addr = 0x54,
-	.xtal_khz = 10111,
-};
-
-/* try to figure out the frontend, each card/box can have on of the following list */
-int flexcop_frontend_init(struct flexcop_device *fc)
+static void cablestar2_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
 {
-	struct dvb_frontend_ops *ops;
-	struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
-	struct i2c_adapter *i2c_tuner;
-
-	/* enable no_base_addr - no repeated start when reading */
-	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c);
-	if (fc->fe != NULL) {
-		flexcop_ibi_value r108;
-		i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
-		ops = &fc->fe->ops;
-
-		fc->fe_sleep = ops->sleep;
-		ops->sleep   = flexcop_sleep;
-
-		fc->dev_type = FC_SKY_REV27;
-
-		/* enable no_base_addr - no repeated start when reading */
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */
-		r108.raw = 0x00000506;
-		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
-		if (i2c_tuner) {
-			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL)
-				err("ITD1000 could NOT be attached");
-			else
-				info("ITD1000 successfully attached");
-		}
-		goto fe_found;
-	}
-	fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */
-
-	/* try the sky v2.8 (cx24123, isl6421) */
-	fc->fe = dvb_attach(cx24123_attach,
-		&skystar2_rev2_8_cx24123_config, i2c);
-	if (fc->fe != NULL) {
-		i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
-		if (i2c_tuner != NULL) {
-			if (dvb_attach(cx24113_attach, fc->fe,
-					&skystar2_rev2_8_cx24113_config,
-					i2c_tuner) == NULL)
-				err("CX24113 could NOT be attached");
-			else
-				info("CX24113 successfully attached");
-		}
-
-		fc->dev_type = FC_SKY_REV28;
-
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-		       &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
-		 * IR-receiver (PIC16F818) - but the card has no input for
-		 * that ??? */
-
-		goto fe_found;
-    }
-
-	/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
-	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
-	if (fc->fe != NULL) {
-		ops = &fc->fe->ops;
-
-		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
-
-		ops->set_voltage = flexcop_set_voltage;
-
-		fc->fe_sleep = ops->sleep;
-		ops->sleep = flexcop_sleep;
-
-		fc->dev_type = FC_SKY_REV26;
-		goto fe_found;
-	}
-
-	/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
-	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_DVBT;
-		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
-		goto fe_found;
-	}
-
-	/* try the air atsc 2nd generation (nxt2002) */
-	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC2;
-		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
-		goto fe_found;
-	}
-
-	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC3;
-		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
-				TUNER_LG_TDVS_H06XF);
-		goto fe_found;
-	}
-
-	/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
-	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC1;
-		goto fe_found;
-	}
-
-	/* try the cable dvb (stv0297) */
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_CABLE;
-		fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
-		goto fe_found;
-	}
-	fc->fc_i2c_adap[0].no_base_addr = 0;
-
-	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	fc->fe = dvb_attach(mt312_attach,
-		&skystar23_samsung_tbdu18132_config, i2c);
-	if (fc->fe != NULL) {
-		ops = &fc->fe->ops;
-
-		ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
-
-		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-		ops->set_tone               = flexcop_set_tone;
-		ops->set_voltage            = flexcop_set_voltage;
-
-		fc->fe_sleep                = ops->sleep;
-		ops->sleep                  = flexcop_sleep;
+	if (fc->fe != NULL)
+		fc->fe->ops.tuner_ops.set_params \
+		= alps_tdee4_stv0297_tuner_set_params;
+	else
+		fc->fc_i2c_adap[0].no_base_addr = 0;
+}
+#endif
+
+static struct {
+	flexcop_device_type_t type;
+	void (*attach)(struct flexcop_device *, struct i2c_adapter *);
+} flexcop_frontends[] = {
+#if defined(CONFIG_DVB_S5H1420_MODULE)
+	{ FC_SKY_REV27, skystar2_rev27_attach },
+#endif
+#if defined(CONFIG_DVB_CX24123_MODULE)
+	{ FC_SKY_REV28, skystar2_rev28_attach },
+#endif
+#if defined(CONFIG_DVB_STV0299_MODULE)
+	{ FC_SKY_REV26, skystar2_rev26_attach },
+#endif
+#if defined(CONFIG_DVB_MT352_MODULE)
+	{ FC_AIR_DVBT, airstar_dvbt_attach },
+#endif
+#if defined(CONFIG_DVB_NXT200X_MODULE)
+	{ FC_AIR_ATSC2, airstar_atsc2_attach },
+#endif
+#if defined(CONFIG_DVB_LGDT330X_MODULE)
+	{ FC_AIR_ATSC3, airstar_atsc3_attach },
+#endif
+#if defined(CONFIG_DVB_BCM3510_MODULE)
+	{ FC_AIR_ATSC1, airstar_atsc1_attach },
+#endif
+#if defined(CONFIG_DVB_STV0297_MODULE)
+	{ FC_CABLE, cablestar2_attach },
+#endif
+#if defined(CONFIG_DVB_MT312_MODULE)
+	{ FC_SKY_REV23, skystar2_rev23_attach },
+#endif
+};
 
-		fc->dev_type                = FC_SKY_REV23;
-		goto fe_found;
+/* try to figure out the frontend */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		/* type needs to be set before, because of some workarounds
+		 * done based on the probed card type */
+		fc->dev_type = flexcop_frontends[i].type;
+		flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap);
+		if (fc->fe != NULL)
+			goto fe_found;
 	}
-
+	fc->dev_type = FC_UNK;
 	err("no frontend driver found for this B2C2/FlexCop adapter");
 	return -ENODEV;
 
 fe_found:
 	info("found '%s' .", fc->fe->ops.info.name);
 	if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
 		err("frontend registration failed!");
-		ops = &fc->fe->ops;
 		if (ops->release != NULL)
 			ops->release(fc->fe);
 		fc->fe = NULL;
@@ -680,6 +741,5 @@ void flexcop_frontend_exit(struct flexcop_device *fc)
 		dvb_unregister_frontend(fc->fe);
 		dvb_frontend_detach(fc->fe);
 	}
-
 	fc->init_state &= ~FC_STATE_FE_INIT;
 }
-- 
cgit v1.2.3


From 6d72be3d96a2a76833b5e2ef54b83ab0f9cb152e Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Wed, 20 May 2009 10:28:05 +0200
Subject: [PATCH] Leadtek WinFast DTV Dongle H

From: tomas petr <tom-petr@seznam.cz>

"Leadtek WinFast DTV Dongle H" is a hybrid digital/analog USB-stick TV
receiver. The code below allows the digital part to work with dvb_usb
in linux.

Priority: normal

Signed-off-by: tomas petr <tom-petr@seznam.cz>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 8 +++++++-
 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h     | 1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
index ac97b9f42..d309ff7cc 100644
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1498,6 +1498,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_MC770) },
 	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT) },
 /* 50 */{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_Dlx) },
+	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_H) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1821,7 +1822,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 7,
+		.num_device_descs = 8,
 		.devices = {
 			{   "Terratec Cinergy HT USB XE",
 				{ &dib0700_usb_id_table[27], NULL },
@@ -1851,6 +1852,11 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[48], NULL },
 				{ NULL },
 			},
+			{   "Leadtek WinFast DTV Dongle H",
+				{ &dib0700_usb_id_table[51], NULL },
+				{ NULL },
+			},
+
 		},
 		.rc_interval      = DEFAULT_RC_INTERVAL,
 		.rc_key_map       = dib0700_rc_keys,
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 1b5e65f1d..07227979e 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -225,6 +225,7 @@
 #define USB_PID_WINFAST_DTV_DONGLE_COLD			0x6025
 #define USB_PID_WINFAST_DTV_DONGLE_WARM			0x6026
 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P		0x6f00
+#define USB_PID_WINFAST_DTV_DONGLE_H			0x60f6
 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2		0x6f01
 #define USB_PID_WINFAST_DTV_DONGLE_GOLD			0x6029
 #define USB_PID_GENPIX_8PSK_REV_1_COLD			0x0200
-- 
cgit v1.2.3


From 6e94aca63322b3d936465135c50d873d53b56c93 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Wed, 20 May 2009 10:35:02 +0200
Subject: Added USB IDs for Terratec T3 and T5

From: Patrick Boettcher <pb@linuxtv.org>

This patch adds the USB IDs for the Terratec devices T3 and T5.

Priority: normal

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/dib0700_devices.c | 12 ++++++++----
 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h     |  2 ++
 2 files changed, 10 insertions(+), 4 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d309ff7cc..eda025714 100644
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1499,6 +1499,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT) },
 /* 50 */{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_Dlx) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_H) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1732,8 +1734,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[30], NULL },
 				{ NULL },
 			},
-			{   "Terratec Cinergy T USB XXS",
-				{ &dib0700_usb_id_table[33], NULL },
+			{   "Terratec Cinergy T USB XXS/ T3",
+				{ &dib0700_usb_id_table[33],
+					&dib0700_usb_id_table[52], NULL },
 				{ NULL },
 			},
 			{   "Elgato EyeTV DTT",
@@ -1794,8 +1797,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[36], NULL },
 				{ NULL },
 			},
-			{  "Terratec Cinergy DT USB XS Diversity",
-				{ &dib0700_usb_id_table[43], NULL },
+			{  "Terratec Cinergy DT USB XS Diversity/ T5",
+				{ &dib0700_usb_id_table[43],
+					&dib0700_usb_id_table[53], NULL},
 				{ NULL },
 			},
 			{  "Sony PlayTV",
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 07227979e..7340ef4cd 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -181,6 +181,8 @@
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
+#define USB_PID_TERRATEC_T3				0x10a0
+#define USB_PID_TERRATEC_T5				0x10a1
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
 #define USB_PID_PINNACLE_PCTV2000E			0x022c
 #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH		0x0228
-- 
cgit v1.2.3


From 7965383d6db294fc173ab00dd9f407f4af871ef7 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Wed, 20 May 2009 10:42:33 +0200
Subject: DIBUSB_MC : fix i2c to not corrupt eeprom in case of strange read
 pattern

From: matthieu castet <castet.matthieu@free.fr>

dibusb_i2c_xfer seems to do things very dangerous :
it assumes that it get only write/read request or write request.

That means that read can be understood as write. For example a program
doing
file = open("/dev/i2c-x", O_RDWR);
    ioctl(file, I2C_SLAVE, 0x50)
read(file, data, 10)
    will corrupt the eeprom as it will be understood as a write.

Priority: normal

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/dibusb-common.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c
index d774879df..99b3b9a43 100644
--- a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -133,14 +133,17 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 
 	for (i = 0; i < num; i++) {
 		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+		if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0
+					  && (msg[i+1].flags & I2C_M_RD)) {
 			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,
 						msg[i+1].buf,msg[i+1].len) < 0)
 				break;
 			i++;
-		} else
+		} else if ((msg[i].flags & I2C_M_RD) == 0) {
 			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
 				break;
+		} else
+			break;
 	}
 
 	mutex_unlock(&d->i2c_mutex);
-- 
cgit v1.2.3


From abdeb4f3e7f1f6ec9cd4f59ad2d1eaabfea6d2a5 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Wed, 20 May 2009 10:52:13 +0200
Subject: Remove support for Genpix-CW3K (damages hardware)

From: Alan Nisota <anisota@gmail.com>

I have been informed by the manufacturer that the patch currently in the v4l tree to support the Genpix-CW3K version of the hardware will actually
damage the firmware on recent units.  As he seems to not want this hardware supported in Linux, and I do not know how to detect the difference between
affected and not-affected units, I am requesting the immediate removal of support for this device.  This patch removes a portion of the changeset
dce7e08ed2b1 applied 2007-08-18 relating to this specific device.

Adapted patch to not remove code, but to only to comment it out.

Priority: normal

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/gp8psk.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c
index 3dd684386..003d97f8c 100644
--- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -223,7 +223,7 @@ static struct usb_device_id gp8psk_usb_table [] = {
 	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
 	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
 	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) },
+/*	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */
 	    { 0 },
 };
 MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
@@ -254,7 +254,7 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.num_device_descs = 4,
+	.num_device_descs = 3,
 	.devices = {
 		{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
 		  .cold_ids = { &gp8psk_usb_table[0], NULL },
@@ -268,10 +268,12 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 		  .cold_ids = { NULL },
 		  .warm_ids = { &gp8psk_usb_table[3], NULL },
 		},
+#if 0
 		{ .name = "Genpix SkyWalker-CW3K DVB-S receiver",
 		  .cold_ids = { NULL },
 		  .warm_ids = { &gp8psk_usb_table[4], NULL },
 		},
+#endif
 		{ NULL },
 	}
 };
-- 
cgit v1.2.3


From 3e94e24e59b323cdacd22598b28769753866bfc3 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 12 May 2009 20:39:28 +0000
Subject: core: fix potential mutex_unlock without mutex_lock in dvb_dvr_read

From: Simon Arlott <simon@fire.lp0.eu>

dvb_dvr_read may unlock the dmxdev mutex and return -ENODEV, except this
function is a file op and will never be called with the mutex held.

There's existing mutex_lock and mutex_unlock around the actual read but
it's commented out.  These should probably be uncommented but the read
blocks and this could block another non-blocking reader on the mutex
instead.

This change comments out the extra mutex_unlock.

[akpm@linux-foundation.org: cleanups, simplification]
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/dvb-core/dmxdev.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-core/dmxdev.c b/linux/drivers/media/dvb/dvb-core/dmxdev.c
index c35fbb8d8..6d6121eb5 100644
--- a/linux/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/linux/drivers/media/dvb/dvb-core/dmxdev.c
@@ -244,19 +244,13 @@ static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count,
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dmxdev *dmxdev = dvbdev->priv;
-	int ret;
 
-	if (dmxdev->exit) {
-		mutex_unlock(&dmxdev->mutex);
+	if (dmxdev->exit)
 		return -ENODEV;
-	}
 
-	//mutex_lock(&dmxdev->mutex);
-	ret = dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
-				     file->f_flags & O_NONBLOCK,
-				     buf, count, ppos);
-	//mutex_unlock(&dmxdev->mutex);
-	return ret;
+	return dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
+				      file->f_flags & O_NONBLOCK,
+				      buf, count, ppos);
 }
 
 static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev,
-- 
cgit v1.2.3


From 3e3ae9acd7a21aadc994ca194d5799c0cf441a7a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 14 May 2009 19:27:16 +0000
Subject: Siano: smsusb - add big endien support

From: Uri Shkolnik <uris@siano-ms.com>

Add support for big endien target hosts, which
use USB interface.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsusb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c
index 7f0246fdb..adeb920a5 100644
--- a/linux/drivers/media/dvb/siano/smsusb.c
+++ b/linux/drivers/media/dvb/siano/smsusb.c
@@ -78,6 +78,7 @@ static void smsusb_onresponse(struct urb *urb, struct pt_regs *regs)
 	if ((urb->actual_length > 0) && (urb->status == 0)) {
 		struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)surb->cb->p;
 
+		smsendian_handle_message_header(phdr);
 		if (urb->actual_length >= phdr->msgLength) {
 			surb->cb->size = phdr->msgLength;
 
-- 
cgit v1.2.3


From 99a8dbb1166ea0866ab85aa6990517d75c3d0cd6 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 14 May 2009 19:28:17 +0000
Subject: Siano: move dvb-api headers' includes to dvb adapter

From: Uri Shkolnik <uris@siano-ms.com>

Move the DVB-API v3 headers' include list from the core component
to the smsdvb (DVB adapter) which is the only one that uses them.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.h | 7 -------
 linux/drivers/media/dvb/siano/smsdvb.c     | 5 +++++
 2 files changed, 5 insertions(+), 7 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h
index d98b4a749..0310c3a30 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.h
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h
@@ -35,13 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <asm/page.h>
 #include "compat.h"
 
-#define SMS_DVB3_SUBSYS
-#ifdef SMS_DVB3_SUBSYS
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#endif
 
 #define kmutex_init(_p_) mutex_init(_p_)
 #define kmutex_lock(_p_) mutex_lock(_p_)
diff --git a/linux/drivers/media/dvb/siano/smsdvb.c b/linux/drivers/media/dvb/siano/smsdvb.c
index f43c7f543..39421ee6f 100644
--- a/linux/drivers/media/dvb/siano/smsdvb.c
+++ b/linux/drivers/media/dvb/siano/smsdvb.c
@@ -22,6 +22,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <linux/module.h>
 #include <linux/init.h>
 
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+
 #include "smscoreapi.h"
 #include "smsendian.h"
 #include "sms-cards.h"
-- 
cgit v1.2.3


From 0d7f5cd403444bc4434d8bf726e528400f2a3926 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 14 May 2009 19:31:23 +0000
Subject: Siano: smscards - add gpio look-up table

From: Uri Shkolnik <uris@siano-ms.com>

Add gpio look-up table for various requirements, any
target may select any gpio and assign it to a function

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/sms-cards.h | 34 +++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/sms-cards.h b/linux/drivers/media/dvb/siano/sms-cards.h
index 64d74c59c..5bd4fb4d3 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.h
+++ b/linux/drivers/media/dvb/siano/sms-cards.h
@@ -35,9 +35,43 @@
 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9
 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10
 
+struct sms_board_gpio_cfg {
+	int lna_vhf_exist;
+	int lna_vhf_ctrl;
+	int lna_uhf_exist;
+	int lna_uhf_ctrl;
+	int lna_uhf_d_ctrl;
+	int lna_sband_exist;
+	int lna_sband_ctrl;
+	int lna_sband_d_ctrl;
+	int foreign_lna0_ctrl;
+	int foreign_lna1_ctrl;
+	int foreign_lna2_ctrl;
+	int rf_switch_vhf;
+	int rf_switch_uhf;
+	int rf_switch_sband;
+	int leds_power;
+	int led0;
+	int led1;
+	int led2;
+	int led3;
+	int led4;
+	int ir;
+	int eeprom_wp;
+	int mrc_sense;
+	int mrc_pdn_resetn;
+	int mrc_gp0; /* mrcs spi int */
+	int mrc_gp1;
+	int mrc_gp2;
+	int mrc_gp3;
+	int mrc_gp4;
+	int host_spi_gsp_ts_int;
+};
+
 struct sms_board {
 	enum sms_device_type_st type;
 	char *name, *fw[DEVICE_MODE_MAX];
+	struct sms_board_gpio_cfg board_cfg;
 
 	/* gpios */
 	int led_power, led_hi, led_lo, lna_ctrl, rf_switch;
-- 
cgit v1.2.3


From 11c31c4bd3cd328f0865ec402bf805372fbd6f22 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 14 May 2009 19:32:12 +0000
Subject: Siano: bind infra-red component

From: Uri Shkolnik <uris@siano-ms.com>

Add the infra-red to the makefile and declare
the assignment in the cards components.

Priority: normal

[mchehab@redhat.com: Fixed a few trivial merge conflicts]
Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/Makefile     |  2 +-
 linux/drivers/media/dvb/siano/sms-cards.c  |  1 +
 linux/drivers/media/dvb/siano/sms-cards.h  |  4 ++++
 linux/drivers/media/dvb/siano/smscoreapi.h |  3 ++-
 linux/drivers/media/dvb/siano/smsir.c      | 24 ++++++++++++------------
 5 files changed, 20 insertions(+), 14 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/Makefile b/linux/drivers/media/dvb/siano/Makefile
index 6354a4718..c6644d909 100644
--- a/linux/drivers/media/dvb/siano/Makefile
+++ b/linux/drivers/media/dvb/siano/Makefile
@@ -1,4 +1,4 @@
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o
+sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
 
 obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
 obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index 63e4d0ec6..c35ff1f3f 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -18,6 +18,7 @@
  */
 
 #include "sms-cards.h"
+#include "smsir.h"
 
 static int sms_dbg;
 module_param_named(cards_dbg, sms_dbg, int, 0644);
diff --git a/linux/drivers/media/dvb/siano/sms-cards.h b/linux/drivers/media/dvb/siano/sms-cards.h
index 5bd4fb4d3..447481ab5 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.h
+++ b/linux/drivers/media/dvb/siano/sms-cards.h
@@ -22,6 +22,7 @@
 
 #include <linux/usb.h>
 #include "smscoreapi.h"
+#include "smsir.h"
 
 #define SMS_BOARD_UNKNOWN 0
 #define SMS1XXX_BOARD_SIANO_STELLAR 1
@@ -72,6 +73,7 @@ struct sms_board {
 	enum sms_device_type_st type;
 	char *name, *fw[DEVICE_MODE_MAX];
 	struct sms_board_gpio_cfg board_cfg;
+	enum ir_kb_type ir_kb_type;
 
 	/* gpios */
 	int led_power, led_hi, led_lo, lna_ctrl, rf_switch;
@@ -79,6 +81,8 @@ struct sms_board {
 
 struct sms_board *sms_get_board(int id);
 
+extern struct smscore_device_t *coredev;
+
 int sms_board_setup(struct smscore_device_t *coredev);
 
 #define SMS_LED_OFF 0
diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h
index 0310c3a30..f4aa406ef 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.h
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h
@@ -35,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <asm/page.h>
 #include "compat.h"
 
+#include "smsir.h"
 
 #define kmutex_init(_p_) mutex_init(_p_)
 #define kmutex_lock(_p_) mutex_lock(_p_)
@@ -168,7 +169,7 @@ struct smscore_device_t {
 	u32 fw_buf_size;
 
 	/* Infrared (IR) */
-	/* struct ir_t ir; */
+	struct ir_t ir;
 
 	int led_state;
 };
diff --git a/linux/drivers/media/dvb/siano/smsir.c b/linux/drivers/media/dvb/siano/smsir.c
index a5f302c58..e3d776fee 100644
--- a/linux/drivers/media/dvb/siano/smsir.c
+++ b/linux/drivers/media/dvb/siano/smsir.c
@@ -99,7 +99,7 @@ static void sms_ir_rc5_event(struct smscore_device_t *coredev,
 	bool toggle_changed;
 	u16 keycode;
 
-	sms_info("IR RC5 word: address %d, command %d, toggle %d",
+	sms_log("IR RC5 word: address %d, command %d, toggle %d",
 				addr, cmd, toggle);
 
 	toggle_changed = ir_toggle != toggle;
@@ -118,7 +118,7 @@ static void sms_ir_rc5_event(struct smscore_device_t *coredev,
 			(keycode != KEY_VOLUMEUP && keycode != KEY_VOLUMEDOWN))
 		return; /* accept only repeated volume, reject other keys */
 
-	sms_info("kernel input keycode (from ir) %d", keycode);
+	sms_log("kernel input keycode (from ir) %d", keycode);
 	input_report_key(coredev->ir.input_dev, keycode, 1);
 	input_sync(coredev->ir.input_dev);
 
@@ -147,7 +147,7 @@ static u32 ir_rc5_decode(unsigned int code)
 			break;
 		case 3:
 /*	dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);*/
-			sms_info("bad code");
+			sms_log("bad code");
 			return 0;
 		}
 	}
@@ -175,7 +175,7 @@ static void sms_rc5_parse_word(struct smscore_device_t *coredev)
 		RC5_PUSH_BIT(rc5_word, (ir_word>>i)&1, j)
 
 	rc5_word = ir_rc5_decode(rc5_word);
-	/* sms_info("temp = 0x%x, rc5_code = 0x%x", ir_word, rc5_word); */
+	/* sms_log("temp = 0x%x, rc5_code = 0x%x", ir_word, rc5_word); */
 
 	sms_ir_rc5_event(coredev,
 				RC5_TOGGLE(rc5_word),
@@ -210,11 +210,11 @@ static void sms_rc5_accumulate_bits(struct smscore_device_t *coredev,
 			if (ir_pos == RC5_WORD_LEN)
 				sms_rc5_parse_word(coredev);
 			else if (ir_pos) /* timeout within a word */
-				sms_info("IR error parsing a word");
+				sms_log("IR error parsing a word");
 
 			ir_pos = 0;
 			ir_word = 0;
-			/* sms_info("timeout %d", time); */
+			/* sms_log("timeout %d", time); */
 			break;
 		}
 		/* The time is within the range of this number of bits */
@@ -236,7 +236,7 @@ void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
 	int count = len>>2;
 
 	samples = (s32 *)buf;
-/*	sms_info("IR buffer received, length = %d", count);*/
+/*	sms_log("IR buffer received, length = %d", count);*/
 
 	for (i = 0; i < count; i++)
 		if (ir_protocol == IR_RC5)
@@ -248,7 +248,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
 {
 	struct input_dev *input_dev;
 
-	sms_info("Allocating input device");
+	sms_log("Allocating input device");
 	input_dev = input_allocate_device();
 	if (!input_dev)	{
 		sms_err("Not enough memory");
@@ -261,11 +261,11 @@ int sms_ir_init(struct smscore_device_t *coredev)
 	coredev->ir.keyboard_layout_map =
 		keyboard_layout_maps[coredev->ir.ir_kb_type].
 				keyboard_layout_map;
-	sms_info("IR remote keyboard type is %d", coredev->ir.ir_kb_type);
+	sms_log("IR remote keyboard type is %d", coredev->ir.ir_kb_type);
 
 	coredev->ir.controller = 0;	/* Todo: vega/nova SPI number */
 	coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
-	sms_info("IR port %d, timeout %d ms",
+	sms_log("IR port %d, timeout %d ms",
 			coredev->ir.controller, coredev->ir.timeout);
 
 	snprintf(coredev->ir.name,
@@ -280,7 +280,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
 	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
 
-	sms_info("Input device (IR) %s is set for key events", input_dev->name);
+	sms_log("Input device (IR) %s is set for key events", input_dev->name);
 
 	if (input_register_device(input_dev)) {
 		sms_err("Failed to register device");
@@ -296,6 +296,6 @@ void sms_ir_exit(struct smscore_device_t *coredev)
 	if (coredev->ir.input_dev)
 		input_unregister_device(coredev->ir.input_dev);
 
-	sms_info("");
+	sms_log("");
 }
 
-- 
cgit v1.2.3


From 0605798099a08b6dddc3c89ab0047146840eedea Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 18 May 2009 03:58:54 -0300
Subject: date: Thu May 14 12:29:35 2009 -0700

From: Uri Shkolnik <uris@siano-ms.com>

Siano: USB - move the device id table to the cards module


The card modules is the component which handles various targets,
so the IDs table should reside within it.

Priority: normal

[mchehab@redhat.com: add missing smsendian.h include at smscoreapi.c]
Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 98 +++++++++++++++++++++++++-----
 1 file changed, 84 insertions(+), 14 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index 15272dbb5..c13d80698 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -33,6 +33,8 @@
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
+#include "smsir.h"
+#include "smsendian.h"
 
 static int sms_dbg;
 module_param_named(debug, sms_dbg, int, 0644);
@@ -348,6 +350,7 @@ int smscore_register_device(struct smsdevice_params_t *params,
 	init_completion(&dev->init_device_done);
 	init_completion(&dev->reload_start_done);
 	init_completion(&dev->resume_done);
+	init_completion(&dev->ir_init_done);
 
 	/* alloc common buffer */
 	dev->common_buffer_size = params->buffer_size * params->num_buffers;
@@ -403,6 +406,71 @@ int smscore_register_device(struct smsdevice_params_t *params,
 }
 EXPORT_SYMBOL_GPL(smscore_register_device);
 
+
+static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev,
+		void *buffer, size_t size, struct completion *completion) {
+	int rc = coredev->sendrequest_handler(coredev->context, buffer, size);
+	if (rc < 0) {
+		sms_info("sendrequest returned error %d", rc);
+		return rc;
+	}
+
+	return wait_for_completion_timeout(completion,
+			msecs_to_jiffies(SMS_PROTOCOL_MAX_RAOUNDTRIP_MS)) ?
+			0 : -ETIME;
+}
+
+/**
+ * Starts & enables IR operations
+ *
+ * @return 0 on success, < 0 on error.
+ */
+static int smscore_init_ir(struct smscore_device_t *coredev)
+{
+	int ir_io;
+	int rc;
+	void *buffer;
+
+	coredev->ir.input_dev = NULL;
+	ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
+	if (ir_io) {/* only if IR port exist we use IR sub-module */
+		sms_info("IR loading");
+		rc = sms_ir_init(coredev);
+
+		if	(rc != 0)
+			sms_err("Error initialization DTV IR sub-module");
+		else {
+			buffer = kmalloc(sizeof(struct SmsMsgData_ST2) +
+						SMS_DMA_ALIGNMENT,
+						GFP_KERNEL | GFP_DMA);
+			if (buffer) {
+				struct SmsMsgData_ST2 *msg =
+				(struct SmsMsgData_ST2 *)
+				SMS_ALIGN_ADDRESS(buffer);
+
+				SMS_INIT_MSG(&msg->xMsgHeader,
+						MSG_SMS_START_IR_REQ,
+						sizeof(struct SmsMsgData_ST2));
+				msg->msgData[0] = coredev->ir.controller;
+				msg->msgData[1] = coredev->ir.timeout;
+
+				smsendian_handle_tx_message(
+					(struct SmsMsgHdr_ST2 *)msg);
+				rc = smscore_sendrequest_and_wait(coredev, msg,
+						msg->xMsgHeader. msgLength,
+						&coredev->ir_init_done);
+
+				kfree(buffer);
+			} else
+				sms_err
+				("Sending IR initialization message failed");
+		}
+	} else
+		sms_info("IR port has not been detected");
+
+	return 0;
+}
+
 /**
  * sets initial device mode and notifies client hotplugs that device is ready
  *
@@ -423,6 +491,7 @@ int smscore_start_device(struct smscore_device_t *coredev)
 	kmutex_lock(&g_smscore_deviceslock);
 
 	rc = smscore_notify_callbacks(coredev, coredev->device, 1);
+	smscore_init_ir(coredev);
 
 	sms_info("device %p started, rc %d", coredev, rc);
 
@@ -432,20 +501,6 @@ int smscore_start_device(struct smscore_device_t *coredev)
 }
 EXPORT_SYMBOL_GPL(smscore_start_device);
 
-static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev,
-					void *buffer, size_t size,
-					struct completion *completion)
-{
-	int rc = coredev->sendrequest_handler(coredev->context, buffer, size);
-	if (rc < 0) {
-		sms_info("sendrequest returned error %d", rc);
-		return rc;
-	}
-
-	return wait_for_completion_timeout(completion,
-					   msecs_to_jiffies(10000)) ?
-						0 : -ETIME;
-}
 
 static int smscore_load_firmware_family2(struct smscore_device_t *coredev,
 					 void *buffer, size_t size)
@@ -621,6 +676,9 @@ void smscore_unregister_device(struct smscore_device_t *coredev)
 
 	kmutex_lock(&g_smscore_deviceslock);
 
+	/* Release input device (IR) resources */
+	sms_ir_exit(coredev);
+
 	smscore_notify_clients(coredev);
 	smscore_notify_callbacks(coredev, NULL, 0);
 
@@ -980,6 +1038,18 @@ void smscore_onresponse(struct smscore_device_t *coredev,
 		case MSG_SMS_SLEEP_RESUME_COMP_IND:
 			complete(&coredev->resume_done);
 			break;
+		case MSG_SMS_START_IR_RES:
+			complete(&coredev->ir_init_done);
+			break;
+		case MSG_SMS_IR_SAMPLES_IND:
+			sms_ir_event(coredev,
+				(const char *)
+				((char *)phdr
+				+ sizeof(struct SmsMsgHdr_ST)),
+				(int)phdr->msgLength
+				- sizeof(struct SmsMsgHdr_ST));
+			break;
+
 		default:
 #if 0
 			sms_info("no client (%p) or error (%d), "
-- 
cgit v1.2.3


From 8c5084621800a914e3ca5e6a35d2242d8c47143a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 14 May 2009 19:33:37 +0000
Subject: Siano: smscards - fix wrong firmware assignment

From: Uri Shkolnik <uris@siano-ms.com>

Remove wrong firmware assignments for Nova, Stellar

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/sms-cards.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index c35ff1f3f..b5dc36dc8 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -31,17 +31,14 @@ static struct sms_board sms_boards[] = {
 	[SMS1XXX_BOARD_SIANO_STELLAR] = {
 		.name	= "Siano Stellar Digital Receiver",
 		.type	= SMS_STELLAR,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_SIANO_NOVA_A] = {
 		.name	= "Siano Nova A Digital Receiver",
 		.type	= SMS_NOVA_A0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_SIANO_NOVA_B] = {
 		.name	= "Siano Nova B Digital Receiver",
 		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_SIANO_VEGA] = {
 		.name	= "Siano Vega Digital Receiver",
-- 
cgit v1.2.3


From 8a53093333397ea670efada7f563c1c429f7481c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 14 May 2009 19:34:59 +0000
Subject: Siano: smscards - assign gpio to HPG targets

From: Uri Shkolnik <uris@siano-ms.com>

Assign using the new gpio structures, i/o for exist HPG
targets, without removing the old implementation.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/sms-cards.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index b5dc36dc8..fda483f07 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -63,6 +63,9 @@ static struct sms_board sms_boards[] = {
 		.name	= "Hauppauge WinTV MiniStick",
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
+		.board_cfg.leds_power = 26,
+		.board_cfg.led0 = 27,
+		.board_cfg.led1 = 28,
 		.led_power = 26,
 		.led_lo    = 27,
 		.led_hi    = 28,
@@ -72,7 +75,9 @@ static struct sms_board sms_boards[] = {
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
 		.lna_ctrl  = 29,
+		.board_cfg.foreign_lna0_ctrl = 29,
 		.rf_switch = 17,
+		.board_cfg.rf_switch_uhf = 17,
 	},
 	[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
 		.name	= "Hauppauge WinTV MiniCard",
-- 
cgit v1.2.3


From 431384bb330ec2f151b2e44b3ecc85c61cdf0477 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 May 2009 08:59:37 +0000
Subject: Siano: smscore - fix get_common_buffer bug

From: Uri Shkolnik <uris@siano-ms.com>

get common buffers() should block operation until valid buffer
is avaliable.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 38 +++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 9 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index c13d80698..c65c9196c 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -30,6 +30,7 @@
 #include <linux/io.h>
 
 #include <linux/firmware.h>
+#include <linux/wait.h>
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
@@ -352,6 +353,9 @@ int smscore_register_device(struct smsdevice_params_t *params,
 	init_completion(&dev->resume_done);
 	init_completion(&dev->ir_init_done);
 
+	/* Buffer management */
+	init_waitqueue_head(&dev->buffer_mng_waitq);
+
 	/* alloc common buffer */
 	dev->common_buffer_size = params->buffer_size * params->num_buffers;
 	dev->common_buffer = dma_alloc_coherent(NULL, dev->common_buffer_size,
@@ -686,7 +690,9 @@ void smscore_unregister_device(struct smscore_device_t *coredev)
 	 * onresponse must no longer be called */
 
 	while (1) {
-		while ((cb = smscore_getbuffer(coredev))) {
+		while (!list_empty(&coredev->buffers)) {
+			cb = (struct smscore_buffer_t *) coredev->buffers.next;
+			list_del(&cb->entry);
 			kfree(cb);
 			num_buffers++;
 		}
@@ -707,8 +713,10 @@ void smscore_unregister_device(struct smscore_device_t *coredev)
 
 	if (coredev->common_buffer)
 		dma_free_coherent(NULL, coredev->common_buffer_size,
-				  coredev->common_buffer,
-				  coredev->common_buffer_phys);
+			coredev->common_buffer, coredev->common_buffer_phys);
+
+	if (coredev->fw_buf != NULL)
+		kfree(coredev->fw_buf);
 
 	list_del(&coredev->entry);
 	kfree(coredev);
@@ -1076,12 +1084,24 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
 	struct smscore_buffer_t *cb = NULL;
 	unsigned long flags;
 
+	DEFINE_WAIT(wait);
+
 	spin_lock_irqsave(&coredev->bufferslock, flags);
 
-	if (!list_empty(&coredev->buffers)) {
-		cb = (struct smscore_buffer_t *) coredev->buffers.next;
-		list_del(&cb->entry);
-	}
+	/* This function must return a valid buffer, since the buffer list is
+	 * finite, we check that there is an available buffer, if not, we wait
+	 * until such buffer become available.
+	 */
+
+	prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
+
+	if (list_empty(&coredev->buffers))
+		schedule();
+
+	finish_wait(&coredev->buffer_mng_waitq, &wait);
+
+	cb = (struct smscore_buffer_t *) coredev->buffers.next;
+	list_del(&cb->entry);
 
 	spin_unlock_irqrestore(&coredev->bufferslock, flags);
 
@@ -1098,8 +1118,8 @@ EXPORT_SYMBOL_GPL(smscore_getbuffer);
  *
  */
 void smscore_putbuffer(struct smscore_device_t *coredev,
-		       struct smscore_buffer_t *cb)
-{
+		struct smscore_buffer_t *cb) {
+	wake_up_interruptible(&coredev->buffer_mng_waitq);
 	list_add_locked(&cb->entry, &coredev->buffers, &coredev->bufferslock);
 }
 EXPORT_SYMBOL_GPL(smscore_putbuffer);
-- 
cgit v1.2.3


From 4ffca8cce22602b296a5358e88a13811f9d9f272 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 May 2009 09:01:03 +0000
Subject: Siano: smscore - fix byte ordering bug

From: Uri Shkolnik <uris@siano-ms.com>

Fix byte ordering bug.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index c65c9196c..0f360d7ba 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -31,6 +31,7 @@
 
 #include <linux/firmware.h>
 #include <linux/wait.h>
+#include <asm/byteorder.h>
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
@@ -511,9 +512,13 @@ static int smscore_load_firmware_family2(struct smscore_device_t *coredev,
 {
 	struct SmsFirmware_ST *firmware = (struct SmsFirmware_ST *) buffer;
 	struct SmsMsgHdr_ST *msg;
-	u32 mem_address = firmware->StartAddress;
+	u32 mem_address;
 	u8 *payload = firmware->Payload;
 	int rc = 0;
+	firmware->StartAddress = le32_to_cpu(firmware->StartAddress);
+	firmware->Length = le32_to_cpu(firmware->Length);
+
+	mem_address = firmware->StartAddress;
 
 	sms_info("loading FW to addr 0x%x size %d",
 		 mem_address, firmware->Length);
-- 
cgit v1.2.3


From a201f474c8b7e9763bba588bdfc6fe757020a851 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 May 2009 09:01:55 +0000
Subject: Siano: smscore - fix isdb-t firmware name

From: Uri Shkolnik <uris@siano-ms.com>

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index 0f360d7ba..d31380b26 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -781,7 +781,7 @@ static char *smscore_fw_lkup[][SMS_NUM_OF_DEVICE_TYPES] = {
 	/*BDA*/
 	{"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"},
 	/*ISDBT*/
-	{"none", "isdbt_nova_12mhz.inp", "dvb_nova_12mhz.inp", "none"},
+	{"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"},
 	/*ISDBTBDA*/
 	{"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"},
 	/*CMMB*/
-- 
cgit v1.2.3


From 748341157e592566108cd3174bad52bdd3c3c07c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 May 2009 09:02:46 +0000
Subject: Siano: smscore - bug fix at get_device_mode

From: Uri Shkolnik <uris@siano-ms.com>

Fix bug that cause error log to echo also if success

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index d31380b26..16917016c 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -905,7 +905,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
 		coredev->device_flags &= ~SMS_DEVICE_NOT_READY;
 	}
 
-	if (rc != 0)
+	if (rc < 0)
 		sms_err("return error code %d.", rc);
 	return rc;
 }
-- 
cgit v1.2.3


From da327f1d8548abe9c1e49220e775407e2c7931f2 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 May 2009 12:17:51 +0000
Subject: Siano: smsusb - fix typo in module description

From: Uri Shkolnik <uris@siano-ms.com>

Fix small typo in the module description

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c
index adeb920a5..4ffc55a03 100644
--- a/linux/drivers/media/dvb/siano/smsusb.c
+++ b/linux/drivers/media/dvb/siano/smsusb.c
@@ -566,6 +566,6 @@ void smsusb_module_exit(void)
 module_init(smsusb_module_init);
 module_exit(smsusb_module_exit);
 
-MODULE_DESCRIPTION("Driver for the Siano SMS1XXX USB dongle");
+MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle");
 MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 0afb58412d04348dc6819d5fe8da278c857d37ab Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 17 May 2009 12:28:55 +0000
Subject: Siano: smsusb - change exit func debug msg

From: Uri Shkolnik <uris@siano-ms.com>

Change the debug message of the USB interface driver exit
function.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c
index 4ffc55a03..3bbbdb197 100644
--- a/linux/drivers/media/dvb/siano/smsusb.c
+++ b/linux/drivers/media/dvb/siano/smsusb.c
@@ -558,9 +558,9 @@ int smsusb_module_init(void)
 
 void smsusb_module_exit(void)
 {
-	sms_debug("");
 	/* Regular USB Cleanup */
 	usb_deregister(&smsusb_driver);
+	sms_info("end");
 }
 
 module_init(smsusb_module_init);
-- 
cgit v1.2.3


From a47bd9ff056af0e4adfc7755b121000827d8972f Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 12:51:41 +0000
Subject: Siano: cards - add two additional (USB) devices

From: Uri Shkolnik <uris@siano-ms.com>

Add two additional USB targets, add these to the 'cards' modules
and to the 'smsusb' module.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/sms-cards.c | 10 ++++++++++
 linux/drivers/media/dvb/siano/sms-cards.h |  2 ++
 linux/drivers/media/dvb/siano/smsusb.c    |  9 +++++++--
 3 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index fda483f07..1a1890680 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -85,6 +85,16 @@ static struct sms_board sms_boards[] = {
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
 		.lna_ctrl  = -1,
 	},
+	[SMS1XXX_BOARD_SIANO_NICE] = {
+	/* 11 */
+		.name = "Siano Nice Digital Receiver",
+		.type = SMS_NOVA_B0,
+	},
+	[SMS1XXX_BOARD_SIANO_VENICE] = {
+	/* 12 */
+		.name = "Siano Venice Digital Receiver",
+		.type = SMS_VEGA,
+	},
 };
 
 struct sms_board *sms_get_board(int id)
diff --git a/linux/drivers/media/dvb/siano/sms-cards.h b/linux/drivers/media/dvb/siano/sms-cards.h
index 447481ab5..e183f946a 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.h
+++ b/linux/drivers/media/dvb/siano/sms-cards.h
@@ -35,6 +35,8 @@
 #define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8
 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9
 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10
+#define SMS1XXX_BOARD_SIANO_NICE	11
+#define SMS1XXX_BOARD_SIANO_VENICE	12
 
 struct sms_board_gpio_cfg {
 	int lna_vhf_exist;
diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c
index 3bbbdb197..a85538b06 100644
--- a/linux/drivers/media/dvb/siano/smsusb.c
+++ b/linux/drivers/media/dvb/siano/smsusb.c
@@ -531,8 +531,13 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5590),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ }		/* Terminating entry */
-};
+	{ USB_DEVICE(0x187f, 0x0202),
+		.driver_info = SMS1XXX_BOARD_SIANO_NICE },
+	{ USB_DEVICE(0x187f, 0x0301),
+		.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
+	{ } /* Terminating entry */
+	};
+
 MODULE_DEVICE_TABLE(usb, smsusb_id_table);
 
 static struct usb_driver smsusb_driver = {
-- 
cgit v1.2.3


From f19c04a5b4926e17938cbdd708d40446e806509d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 14:15:01 +0000
Subject: Siano: smssdio - revert to stand alone module

From: Uri Shkolnik <uris@siano-ms.com>

Make the SDIO interface driver a stand alone module.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smssdio.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smssdio.c b/linux/drivers/media/dvb/siano/smssdio.c
index 4f8fa59a9..dfaa49a53 100644
--- a/linux/drivers/media/dvb/siano/smssdio.c
+++ b/linux/drivers/media/dvb/siano/smssdio.c
@@ -332,7 +332,7 @@ static struct sdio_driver smssdio_driver = {
 /* Module functions                                                */
 /*******************************************************************/
 
-int smssdio_register(void)
+int smssdio_module_init(void)
 {
 	int ret = 0;
 
@@ -344,11 +344,14 @@ int smssdio_register(void)
 	return ret;
 }
 
-void smssdio_unregister(void)
+void smssdio_module_exit(void)
 {
 	sdio_unregister_driver(&smssdio_driver);
 }
 
+module_init(smssdio_module_init);
+module_exit(smssdio_module_exit);
+
 MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver");
 MODULE_AUTHOR("Pierre Ossman");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From b4bb609923f3f62aa6fa3dd8efa9b384ee02d177 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 14:49:19 +0000
Subject: Siano: Add new GPIO management interface

From: Uri Shkolnik <uris@siano-ms.com>

Add new GPIO management interface to replace old (buggy) one.
Keeping old interface intact for now.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/sms-cards.c  |   2 +-
 linux/drivers/media/dvb/siano/smscoreapi.c | 235 ++++++++++++++++++++++++++++-
 linux/drivers/media/dvb/siano/smscoreapi.h |  55 ++++++-
 3 files changed, 288 insertions(+), 4 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index 1a1890680..370cf513a 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -109,7 +109,7 @@ static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable)
 {
 	int lvl, ret;
 	u32 gpio;
-	struct smscore_gpio_config gpioconfig = {
+	struct smscore_config_gpio gpioconfig = {
 		.direction            = SMS_GPIO_DIRECTION_OUTPUT,
 		.pullupdown           = SMS_GPIO_PULLUPDOWN_NONE,
 		.inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL,
diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index 16917016c..6446e0f6c 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -1331,8 +1331,9 @@ static int smscore_map_common_buffer(struct smscore_device_t *coredev,
 }
 #endif
 
+/* old GPIO managments implementation */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_gpio_config *pinconfig)
+			   struct smscore_config_gpio *pinconfig)
 {
 	struct {
 		struct SmsMsgHdr_ST hdr;
@@ -1401,6 +1402,238 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level)
 					    &msg, sizeof(msg));
 }
 
+/* new GPIO managment implementation */
+static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
+		u32 *pGroupNum, u32 *pGroupCfg) {
+
+	*pGroupCfg = 1;
+
+	if (PinNum >= 0 && PinNum <= 1)	{
+		*pTranslatedPinNum = 0;
+		*pGroupNum = 9;
+		*pGroupCfg = 2;
+	} else if (PinNum >= 2 && PinNum <= 6) {
+		*pTranslatedPinNum = 2;
+		*pGroupNum = 0;
+		*pGroupCfg = 2;
+	} else if (PinNum >= 7 && PinNum <= 11) {
+		*pTranslatedPinNum = 7;
+		*pGroupNum = 1;
+	} else if (PinNum >= 12 && PinNum <= 15) {
+		*pTranslatedPinNum = 12;
+		*pGroupNum = 2;
+		*pGroupCfg = 3;
+	} else if (PinNum == 16) {
+		*pTranslatedPinNum = 16;
+		*pGroupNum = 23;
+	} else if (PinNum >= 17 && PinNum <= 24) {
+		*pTranslatedPinNum = 17;
+		*pGroupNum = 3;
+	} else if (PinNum == 25) {
+		*pTranslatedPinNum = 25;
+		*pGroupNum = 6;
+	} else if (PinNum >= 26 && PinNum <= 28) {
+		*pTranslatedPinNum = 26;
+		*pGroupNum = 4;
+	} else if (PinNum == 29) {
+		*pTranslatedPinNum = 29;
+		*pGroupNum = 5;
+		*pGroupCfg = 2;
+	} else if (PinNum == 30) {
+		*pTranslatedPinNum = 30;
+		*pGroupNum = 8;
+	} else if (PinNum == 31) {
+		*pTranslatedPinNum = 31;
+		*pGroupNum = 17;
+	} else
+		return -1;
+
+	*pGroupCfg <<= 24;
+
+	return 0;
+}
+
+int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
+		struct smscore_gpio_config *pGpioConfig) {
+
+	u32 totalLen;
+	u32 TranslatedPinNum;
+	u32 GroupNum;
+	u32 ElectricChar;
+	u32 groupCfg;
+	void *buffer;
+	int rc;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[6];
+	} *pMsg;
+
+
+	if (PinNum > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	if (pGpioConfig == NULL)
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) + (sizeof(u32) * 6);
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+
+	if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) {
+		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ;
+		if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum,
+				&groupCfg) != 0)
+			return -EINVAL;
+
+		pMsg->msgData[1] = TranslatedPinNum;
+		pMsg->msgData[2] = GroupNum;
+		ElectricChar = (pGpioConfig->PullUpDown)
+				| (pGpioConfig->InputCharacteristics << 2)
+				| (pGpioConfig->OutputSlewRate << 3)
+				| (pGpioConfig->OutputDriving << 4);
+		pMsg->msgData[3] = ElectricChar;
+		pMsg->msgData[4] = pGpioConfig->Direction;
+		pMsg->msgData[5] = groupCfg;
+	} else {
+		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ;
+		pMsg->msgData[1] = pGpioConfig->PullUpDown;
+		pMsg->msgData[2] = pGpioConfig->OutputSlewRate;
+		pMsg->msgData[3] = pGpioConfig->OutputDriving;
+		pMsg->msgData[4] = pGpioConfig->Direction;
+		pMsg->msgData[5] = 0;
+	}
+
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_configuration_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_configure timeout");
+		else
+			sms_err("smscore_gpio_configure error");
+	}
+	kfree(buffer);
+
+	return rc;
+}
+
+int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 NewLevel) {
+
+	u32 totalLen;
+	int rc;
+	void *buffer;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[3]; /* keep it 3 ! */
+	} *pMsg;
+
+	if ((NewLevel > 1) || (PinNum > MAX_GPIO_PIN_NUMBER) ||
+			(PinNum > MAX_GPIO_PIN_NUMBER))
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) +
+			(3 * sizeof(u32)); /* keep it 3 ! */
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+	pMsg->msgData[1] = NewLevel;
+
+	/* Send message to SMS */
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_set_level_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_set_level timeout");
+		else
+			sms_err("smscore_gpio_set_level error");
+	}
+	kfree(buffer);
+
+	return rc;
+}
+
+int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 *level) {
+
+	u32 totalLen;
+	int rc;
+	void *buffer;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[2];
+	} *pMsg;
+
+
+	if (PinNum > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) + (2 * sizeof(u32));
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_GET_LEVEL_REQ;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+	pMsg->msgData[1] = 0;
+
+	/* Send message to SMS */
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_get_level_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_get_level timeout");
+		else
+			sms_err("smscore_gpio_get_level error");
+	}
+	kfree(buffer);
+
+	/* Its a race between other gpio_get_level() and the copy of the single
+	 * global 'coredev->gpio_get_res' to  the function's variable 'level'
+	 */
+	*level = coredev->gpio_get_res;
+
+	return rc;
+}
+
 static int __init smscore_module_init(void)
 {
 	int rc = 0;
diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h
index f4aa406ef..28663315a 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.h
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h
@@ -550,7 +550,7 @@ struct SMSHOSTLIB_I2C_RES_ST {
 };
 
 
-struct smscore_gpio_config {
+struct smscore_config_gpio {
 #define SMS_GPIO_DIRECTION_INPUT  0
 #define SMS_GPIO_DIRECTION_OUTPUT 1
 	u8 direction;
@@ -576,6 +576,48 @@ struct smscore_gpio_config {
 	u8 outputdriving;
 };
 
+struct smscore_gpio_config {
+#define SMS_GPIO_DIRECTION_INPUT  0
+#define SMS_GPIO_DIRECTION_OUTPUT 1
+	u8 Direction;
+
+#define SMS_GPIO_PULLUPDOWN_NONE     0
+#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1
+#define SMS_GPIO_PULLUPDOWN_PULLUP   2
+#define SMS_GPIO_PULLUPDOWN_KEEPER   3
+	u8 PullUpDown;
+
+#define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL  0
+#define SMS_GPIO_INPUT_CHARACTERISTICS_SCHMITT 1
+	u8 InputCharacteristics;
+
+#define SMS_GPIO_OUTPUT_SLEW_RATE_SLOW		1 /* 10xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST		0 /* 10xx */
+
+
+#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS	0 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS	1 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS	2 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS	3 /* 11xx */
+	u8 OutputSlewRate;
+
+#define SMS_GPIO_OUTPUT_DRIVING_S_4mA		0 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_8mA		1 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_12mA		2 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_16mA		3 /* 10xx */
+
+#define SMS_GPIO_OUTPUT_DRIVING_1_5mA		0 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_2_8mA		1 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_4mA			2 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_7mA			3 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_10mA			4 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_11mA			5 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_14mA			6 /* 11xx */
+#undef SMS_GPIO_OUTPUT_DRIVING_16mA
+#define SMS_GPIO_OUTPUT_DRIVING_16mA			7 /* 11xx */
+	u8 OutputDriving;
+};
+
 extern void smscore_registry_setmode(char *devpath, int mode);
 extern int smscore_registry_getmode(char *devpath);
 
@@ -619,10 +661,19 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
 extern void smscore_putbuffer(struct smscore_device_t *coredev,
 			      struct smscore_buffer_t *cb);
 
+/* old GPIO managment */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_gpio_config *pinconfig);
+			   struct smscore_config_gpio *pinconfig);
 int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
 
+/* new GPIO managment */
+extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
+		struct smscore_gpio_config *pGpioConfig);
+extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 NewLevel);
+extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 *level);
+
 void smscore_set_board_id(struct smscore_device_t *core, int id);
 int smscore_get_board_id(struct smscore_device_t *core);
 
-- 
cgit v1.2.3


From 52057033c8278b7d00e054ea3ea6c5d8e55256a9 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:10:36 +0000
Subject: Siano: smscore - fix some new GPIO definitions names

From: Uri Shkolnik <uris@siano-ms.com>

Fix some definitions' names, in order to emphasize the names

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.h | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h
index 28663315a..6fbab351f 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.h
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h
@@ -581,10 +581,10 @@ struct smscore_gpio_config {
 #define SMS_GPIO_DIRECTION_OUTPUT 1
 	u8 Direction;
 
-#define SMS_GPIO_PULLUPDOWN_NONE     0
-#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1
-#define SMS_GPIO_PULLUPDOWN_PULLUP   2
-#define SMS_GPIO_PULLUPDOWN_KEEPER   3
+#define SMS_GPIO_PULL_UP_DOWN_NONE     0
+#define SMS_GPIO_PULL_UP_DOWN_PULLDOWN 1
+#define SMS_GPIO_PULL_UP_DOWN_PULLUP   2
+#define SMS_GPIO_PULL_UP_DOWN_KEEPER   3
 	u8 PullUpDown;
 
 #define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL  0
@@ -608,13 +608,12 @@ struct smscore_gpio_config {
 
 #define SMS_GPIO_OUTPUT_DRIVING_1_5mA		0 /* 11xx */
 #define SMS_GPIO_OUTPUT_DRIVING_2_8mA		1 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_4mA			2 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_7mA			3 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_10mA			4 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_11mA			5 /* 11xx */
-#define SMS_GPIO_OUTPUT_DRIVING_14mA			6 /* 11xx */
-#undef SMS_GPIO_OUTPUT_DRIVING_16mA
-#define SMS_GPIO_OUTPUT_DRIVING_16mA			7 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_4mA		2 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_7mA		3 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_10mA		4 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_11mA		5 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_14mA		6 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_16mA		7 /* 11xx */
 	u8 OutputDriving;
 };
 
-- 
cgit v1.2.3


From acac54fbcb26b026019f2aed395b998538e3e485 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:18:40 +0000
Subject: Siano: smscards - add board (target) events

From: Uri Shkolnik <uris@siano-ms.com>

Add events handling for targets. All board-specific
(target specific) should reside here.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/sms-cards.c | 167 ++++++++++++++++++++++++++++++
 linux/drivers/media/dvb/siano/sms-cards.h |  24 +++++
 2 files changed, 191 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c
index 370cf513a..d8b15d583 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.c
+++ b/linux/drivers/media/dvb/siano/sms-cards.c
@@ -104,6 +104,173 @@ struct sms_board *sms_get_board(int id)
 	return &sms_boards[id];
 }
 EXPORT_SYMBOL_GPL(sms_get_board);
+static inline void sms_gpio_assign_11xx_default_led_config(
+		struct smscore_gpio_config *pGpioConfig) {
+	pGpioConfig->Direction = SMS_GPIO_DIRECTION_OUTPUT;
+	pGpioConfig->InputCharacteristics =
+		SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL;
+	pGpioConfig->OutputDriving = SMS_GPIO_OUTPUT_DRIVING_4mA;
+	pGpioConfig->OutputSlewRate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS;
+	pGpioConfig->PullUpDown = SMS_GPIO_PULL_UP_DOWN_NONE;
+}
+
+int sms_board_event(struct smscore_device_t *coredev,
+		enum SMS_BOARD_EVENTS gevent) {
+	int board_id = smscore_get_board_id(coredev);
+	struct sms_board *board = sms_get_board(board_id);
+	struct smscore_gpio_config MyGpioConfig;
+
+	sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
+
+	switch (gevent) {
+	case BOARD_EVENT_POWER_INIT: /* including hotplug */
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			/* set I/O and turn off all LEDs */
+			smscore_gpio_configure(coredev,
+					board->board_cfg.leds_power,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.leds_power, 0);
+			smscore_gpio_configure(coredev, board->board_cfg.led0,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.led0, 0);
+			smscore_gpio_configure(coredev, board->board_cfg.led1,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			/* set I/O and turn off LNA */
+			smscore_gpio_configure(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					0);
+			break;
+		}
+		break; /* BOARD_EVENT_BIND */
+
+	case BOARD_EVENT_POWER_SUSPEND:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.leds_power, 0);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led0, 0);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					0);
+			break;
+		}
+		break; /* BOARD_EVENT_POWER_SUSPEND */
+
+	case BOARD_EVENT_POWER_RESUME:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.leds_power, 1);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led0, 1);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					1);
+			break;
+		}
+		break; /* BOARD_EVENT_POWER_RESUME */
+
+	case BOARD_EVENT_BIND:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+				board->board_cfg.leds_power, 1);
+			smscore_gpio_set_level(coredev,
+				board->board_cfg.led0, 1);
+			smscore_gpio_set_level(coredev,
+				board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					1);
+			break;
+		}
+		break; /* BOARD_EVENT_BIND */
+
+	case BOARD_EVENT_SCAN_PROG:
+		break; /* BOARD_EVENT_SCAN_PROG */
+	case BOARD_EVENT_SCAN_COMP:
+		break; /* BOARD_EVENT_SCAN_COMP */
+	case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
+		break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
+	case BOARD_EVENT_FE_LOCK:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+			board->board_cfg.led1, 1);
+			break;
+		}
+		break; /* BOARD_EVENT_FE_LOCK */
+	case BOARD_EVENT_FE_UNLOCK:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		}
+		break; /* BOARD_EVENT_FE_UNLOCK */
+	case BOARD_EVENT_DEMOD_LOCK:
+		break; /* BOARD_EVENT_DEMOD_LOCK */
+	case BOARD_EVENT_DEMOD_UNLOCK:
+		break; /* BOARD_EVENT_DEMOD_UNLOCK */
+	case BOARD_EVENT_RECEPTION_MAX_4:
+		break; /* BOARD_EVENT_RECEPTION_MAX_4 */
+	case BOARD_EVENT_RECEPTION_3:
+		break; /* BOARD_EVENT_RECEPTION_3 */
+	case BOARD_EVENT_RECEPTION_2:
+		break; /* BOARD_EVENT_RECEPTION_2 */
+	case BOARD_EVENT_RECEPTION_1:
+		break; /* BOARD_EVENT_RECEPTION_1 */
+	case BOARD_EVENT_RECEPTION_LOST_0:
+		break; /* BOARD_EVENT_RECEPTION_LOST_0 */
+	case BOARD_EVENT_MULTIPLEX_OK:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 1);
+			break;
+		}
+		break; /* BOARD_EVENT_MULTIPLEX_OK */
+	case BOARD_EVENT_MULTIPLEX_ERRORS:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		}
+		break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
+
+	default:
+		sms_err("Unknown SMS board event");
+		break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sms_board_event);
 
 static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable)
 {
diff --git a/linux/drivers/media/dvb/siano/sms-cards.h b/linux/drivers/media/dvb/siano/sms-cards.h
index e183f946a..38f062f6a 100644
--- a/linux/drivers/media/dvb/siano/sms-cards.h
+++ b/linux/drivers/media/dvb/siano/sms-cards.h
@@ -85,6 +85,30 @@ struct sms_board *sms_get_board(int id);
 
 extern struct smscore_device_t *coredev;
 
+enum SMS_BOARD_EVENTS {
+	BOARD_EVENT_POWER_INIT,
+	BOARD_EVENT_POWER_SUSPEND,
+	BOARD_EVENT_POWER_RESUME,
+	BOARD_EVENT_BIND,
+	BOARD_EVENT_SCAN_PROG,
+	BOARD_EVENT_SCAN_COMP,
+	BOARD_EVENT_EMERGENCY_WARNING_SIGNAL,
+	BOARD_EVENT_FE_LOCK,
+	BOARD_EVENT_FE_UNLOCK,
+	BOARD_EVENT_DEMOD_LOCK,
+	BOARD_EVENT_DEMOD_UNLOCK,
+	BOARD_EVENT_RECEPTION_MAX_4,
+	BOARD_EVENT_RECEPTION_3,
+	BOARD_EVENT_RECEPTION_2,
+	BOARD_EVENT_RECEPTION_1,
+	BOARD_EVENT_RECEPTION_LOST_0,
+	BOARD_EVENT_MULTIPLEX_OK,
+	BOARD_EVENT_MULTIPLEX_ERRORS
+};
+
+int sms_board_event(struct smscore_device_t *coredev,
+		enum SMS_BOARD_EVENTS gevent);
+
 int sms_board_setup(struct smscore_device_t *coredev);
 
 #define SMS_LED_OFF 0
-- 
cgit v1.2.3


From 26abee2f5be78d62a6dd302315e71614f93b62bc Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:24:03 +0000
Subject: Siano: smsusb - remove redundant ifdef

From: Uri Shkolnik <uris@siano-ms.com>

Remove a redundant ifdef

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsusb.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c
index a85538b06..c31a52d3a 100644
--- a/linux/drivers/media/dvb/siano/smsusb.c
+++ b/linux/drivers/media/dvb/siano/smsusb.c
@@ -489,7 +489,6 @@ static int smsusb_resume(struct usb_interface *intf)
 }
 
 struct usb_device_id smsusb_id_table[] = {
-#ifdef CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS
 	{ USB_DEVICE(0x187f, 0x0010),
 		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
 	{ USB_DEVICE(0x187f, 0x0100),
@@ -500,7 +499,6 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_SIANO_NOVA_B },
 	{ USB_DEVICE(0x187f, 0x0300),
 		.driver_info = SMS1XXX_BOARD_SIANO_VEGA },
-#endif
 	{ USB_DEVICE(0x2040, 0x1700),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT },
 	{ USB_DEVICE(0x2040, 0x1800),
-- 
cgit v1.2.3


From 0bd1a842c277e4fbd4b78c3af80708135638e820 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:28:02 +0000
Subject: Siano: smsdvb - add DVB v3 events

From: Uri Shkolnik <uris@siano-ms.com>

Add various DVB-API v3 events, those events will trig
target (card) events.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsdvb.c | 48 ++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsdvb.c b/linux/drivers/media/dvb/siano/smsdvb.c
index 39421ee6f..f8856d9c8 100644
--- a/linux/drivers/media/dvb/siano/smsdvb.c
+++ b/linux/drivers/media/dvb/siano/smsdvb.c
@@ -66,6 +66,54 @@ MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))");
 /* Events that may come from DVB v3 adapter */
 static void sms_board_dvb3_event(struct smsdvb_client_t *client,
 		enum SMS_DVB3_EVENTS event) {
+
+	struct smscore_device_t *coredev = client->coredev;
+	switch (event) {
+	case DVB3_EVENT_INIT:
+		sms_debug("DVB3_EVENT_INIT");
+		sms_board_event(coredev, BOARD_EVENT_BIND);
+		break;
+	case DVB3_EVENT_SLEEP:
+		sms_debug("DVB3_EVENT_SLEEP");
+		sms_board_event(coredev, BOARD_EVENT_POWER_SUSPEND);
+		break;
+	case DVB3_EVENT_HOTPLUG:
+		sms_debug("DVB3_EVENT_HOTPLUG");
+		sms_board_event(coredev, BOARD_EVENT_POWER_INIT);
+		break;
+	case DVB3_EVENT_FE_LOCK:
+		if (client->event_fe_state != DVB3_EVENT_FE_LOCK) {
+			client->event_fe_state = DVB3_EVENT_FE_LOCK;
+			sms_debug("DVB3_EVENT_FE_LOCK");
+			sms_board_event(coredev, BOARD_EVENT_FE_LOCK);
+		}
+		break;
+	case DVB3_EVENT_FE_UNLOCK:
+		if (client->event_fe_state != DVB3_EVENT_FE_UNLOCK) {
+			client->event_fe_state = DVB3_EVENT_FE_UNLOCK;
+			sms_debug("DVB3_EVENT_FE_UNLOCK");
+			sms_board_event(coredev, BOARD_EVENT_FE_UNLOCK);
+		}
+		break;
+	case DVB3_EVENT_UNC_OK:
+		if (client->event_unc_state != DVB3_EVENT_UNC_OK) {
+			client->event_unc_state = DVB3_EVENT_UNC_OK;
+			sms_debug("DVB3_EVENT_UNC_OK");
+			sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_OK);
+		}
+		break;
+	case DVB3_EVENT_UNC_ERR:
+		if (client->event_unc_state != DVB3_EVENT_UNC_ERR) {
+			client->event_unc_state = DVB3_EVENT_UNC_ERR;
+			sms_debug("DVB3_EVENT_UNC_ERR");
+			sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_ERRORS);
+		}
+		break;
+
+	default:
+		sms_err("Unknown dvb3 api event");
+		break;
+	}
 }
 
 static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
-- 
cgit v1.2.3


From 3c278aedd50ae75abf8b20630363185eff753f88 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:34:09 +0000
Subject: Siano: smscore - remove redundant code

From: Uri Shkolnik <uris@siano-ms.com>

remove redundant code, which in the past handled the
various components (now independent modules) registrations.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 88 ------------------------------
 1 file changed, 88 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index 6446e0f6c..802d7e6a9 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -1645,99 +1645,11 @@ static int __init smscore_module_init(void)
 	INIT_LIST_HEAD(&g_smscore_registry);
 	kmutex_init(&g_smscore_registrylock);
 
-#if 0 /* def SMS_CHAR_CLIENT */
-	/* Char interface Register */
-	rc = smschar_register();
-	if (rc) {
-		sms_err("Error registering char device client.\n");
-		goto smschar_error;
-	}
-#endif
-
-#if 0 /* def SMS_DVB_CLIENT */
-	/* DVB Register */
-	rc = smsdvb_register();
-	if (rc) {
-		sms_err("Error registering DVB client.\n");
-		goto smsdvb_error;
-	}
-#endif
-
-#if 0 /* def SMS_NET_CLIENT */
-	/* DVB Register */
-	rc = smsnet_register();
-	if (rc) {
-		sms_err("Error registering Network client.\n");
-		goto smsnet_error;
-	}
-#endif
-
-#if 0 /* def SMS_USB_BUS_DRV */
-	/* USB Register */
-	rc = smsusb_register();
-	if (rc) {
-		sms_err("Error registering USB bus driver.\n");
-		goto sms_bus_drv_error;
-	}
-#endif
-
-#if 0 /* def SMS_SPI_BUS_DRV */
-	/* USB Register */
-	rc = smsspi_register();
-	if (rc) {
-		sms_err("Error registering spi bus driver.\n");
-		goto sms_bus_drv_error;
-	}
-#endif
-
-	return rc;
-#if 0
-sms_bus_drv_error:
-#endif /* 0 */
-#if 0 /* def SMS_NET_CLIENT */
-	smsnet_unregister();
-smsnet_error:
-#endif
-#if 0 /* def SMS_DVB_CLIENT */
-	smsdvb_unregister();
-smsdvb_error:
-#endif
-#if 0 /* def SMS_CHAR_CLIENT */
-	smschar_unregister();
-smschar_error:
-#endif
-	sms_debug("rc %d", rc);
-
 	return rc;
 }
 
 static void __exit smscore_module_exit(void)
 {
-#if 0 /* def SMS_CHAR_CLIENT */
-	/* Char interface UnRegister */
-	smschar_unregister();
-#endif
-
-#if 0 /* def SMS_DVB_CLIENT */
-	/* DVB UnRegister */
-	smsdvb_unregister();
-#endif
-
-#if 0 /* def SMS_NET_CLIENT */
-	/* NET UnRegister */
-	smsnet_unregister();
-#endif
-
-#if 0 /* def SMS_USB_BUS_DRV */
-	/* Unregister USB */
-	smsusb_unregister();
-#endif
-
-#if 0 /* def SMS_SPI_BUS_DRV */
-	/* Unregister SPI */
-	smsspi_unregister();
-#endif
-
 	kmutex_lock(&g_smscore_deviceslock);
 	while (!list_empty(&g_smscore_notifyees)) {
 		struct smscore_device_notifyee_t *notifyee =
-- 
cgit v1.2.3


From 88e23f22d75580ffb879c5fd535d838830dfb7fe Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:52:58 +0000
Subject: Siano: smscore - bind the GPIO SMS protocol

From: Uri Shkolnik <uris@siano-ms.com>

Bind SMS protocol commands to the GPIO commands

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index 802d7e6a9..e513408fc 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -352,6 +352,9 @@ int smscore_register_device(struct smsdevice_params_t *params,
 	init_completion(&dev->init_device_done);
 	init_completion(&dev->reload_start_done);
 	init_completion(&dev->resume_done);
+	init_completion(&dev->gpio_configuration_done);
+	init_completion(&dev->gpio_set_level_done);
+	init_completion(&dev->gpio_get_level_done);
 	init_completion(&dev->ir_init_done);
 
 	/* Buffer management */
@@ -1051,6 +1054,23 @@ void smscore_onresponse(struct smscore_device_t *coredev,
 		case MSG_SMS_SLEEP_RESUME_COMP_IND:
 			complete(&coredev->resume_done);
 			break;
+		case MSG_SMS_GPIO_CONFIG_EX_RES:
+			sms_debug("MSG_SMS_GPIO_CONFIG_EX_RES");
+			complete(&coredev->gpio_configuration_done);
+			break;
+		case MSG_SMS_GPIO_SET_LEVEL_RES:
+			sms_debug("MSG_SMS_GPIO_SET_LEVEL_RES");
+			complete(&coredev->gpio_set_level_done);
+			break;
+		case MSG_SMS_GPIO_GET_LEVEL_RES:
+		{
+			u32 *msgdata = (u32 *) phdr;
+			coredev->gpio_get_res = msgdata[1];
+			sms_debug("MSG_SMS_GPIO_GET_LEVEL_RES gpio level %d",
+					coredev->gpio_get_res);
+			complete(&coredev->gpio_get_level_done);
+			break;
+		}
 		case MSG_SMS_START_IR_RES:
 			complete(&coredev->ir_init_done);
 			break;
-- 
cgit v1.2.3


From dc637c2382bc5ae4e39c9e07ae657d0eaab6d799 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 15:56:16 +0000
Subject: Siano: smsendien - declare function as extern

From: Uri Shkolnik <uris@siano-ms.com>

Declare the object function as 'extern'

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsendian.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsendian.h b/linux/drivers/media/dvb/siano/smsendian.h
index 7fbedc6a6..1624d6fd3 100644
--- a/linux/drivers/media/dvb/siano/smsendian.h
+++ b/linux/drivers/media/dvb/siano/smsendian.h
@@ -24,9 +24,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <asm/byteorder.h>
 
-void smsendian_handle_tx_message(void *buffer);
-void smsendian_handle_rx_message(void *buffer);
-void smsendian_handle_message_header(void *msg);
+extern void smsendian_handle_tx_message(void *buffer);
+extern void smsendian_handle_rx_message(void *buffer);
+extern void smsendian_handle_message_header(void *msg);
 
 #endif /* __SMS_ENDIAN_H__ */
 
-- 
cgit v1.2.3


From b0ead79496ce5e528b0735acae2d8c0c61803d22 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 19 May 2009 16:00:42 +0000
Subject: Siano: smscore - remove redundant define

From: Uri Shkolnik <uris@siano-ms.com>

Remove redundant define.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h
index 6fbab351f..bc4572de6 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.h
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h
@@ -645,7 +645,6 @@ extern int smsclient_sendrequest(struct smscore_client_t *client,
 extern void smscore_onresponse(struct smscore_device_t *coredev,
 			       struct smscore_buffer_t *cb);
 
-#if 1
 extern int smscore_get_common_buffer_size(struct smscore_device_t *coredev);
 extern int smscore_map_common_buffer(struct smscore_device_t *coredev,
 				      struct vm_area_struct *vma);
@@ -653,7 +652,6 @@ extern int smscore_get_fw_filename(struct smscore_device_t *coredev,
 				   int mode, char *filename);
 extern int smscore_send_fw_file(struct smscore_device_t *coredev,
 				u8 *ufwbuf, int size);
-#endif
 
 extern
 struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
-- 
cgit v1.2.3


From 5f623f9662748ffe9662ee5b0561fe746ef3279d Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Wed, 20 May 2009 22:58:16 -0400
Subject: dvb_frontend: fix case where fepriv->exit not reset

From: Devin Heitmueller <dheitmueller@kernellabs.com>

The fact that we now explicitly set fepriv->exit = 1 when the thread is
shutting down exposed an edge case where it was not being reset back to zero
once the thread went away in some cases.  This resulted in failures in cases
where the frontend was closed, and then opened O_RDONLY, since in that case
the thread is not being restarted but it was checking the fepriv->exit flag.

Thanks to Thierry Lelegard, who and encountered and debugged a large portion
of the issue in the same twelve hours that I did (as well as testing my patch).

Priority: high

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Thierry Lelegard <thierry.lelegard@tv-numeric.com>
---
 linux/drivers/media/dvb/dvb-core/dvb_frontend.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
index d359f6841..41166d407 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -668,6 +668,7 @@ restart:
 	}
 
 	fepriv->thread = NULL;
+	fepriv->exit = 0;
 	mb();
 
 	dvb_frontend_wakeup(fe);
-- 
cgit v1.2.3


From 355e218336f85e723e8061e62c292436b0654104 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 22 May 2009 10:19:14 +0000
Subject: flexcop-pci: dmesg visible names broken

From: Matthias Schwarzott <zzam@gentoo.org>

Changeset 1589a993f074124c3edfff03656e910bb472eeaa broke user visible
names of flexcop-pci devices, as it did reorder the enum of card types,
but did not adjust the array containing the card names.

Reorder the names, and uses [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T"
assignment style for more clarity.

It also adds the revision Number to the name for SkyStar rev. 2.3 and rev 2.6
as I think it is useful to see in log output.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/b2c2/flexcop-misc.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-misc.c b/linux/drivers/media/dvb/b2c2/flexcop-misc.c
index e56627d2f..f06f3a907 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -46,16 +46,16 @@ static const char *flexcop_revision_names[] = {
 };
 
 static const char *flexcop_device_names[] = {
-	"Unknown device",
-	"Air2PC/AirStar 2 DVB-T",
-	"Air2PC/AirStar 2 ATSC 1st generation",
-	"Air2PC/AirStar 2 ATSC 2nd generation",
-	"Sky2PC/SkyStar 2 DVB-S",
-	"Sky2PC/SkyStar 2 DVB-S (old version)",
-	"Cable2PC/CableStar 2 DVB-C",
-	"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
-	"Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
-	"Sky2PC/SkyStar 2 DVB-S rev 2.8",
+	[FC_UNK]	= "Unknown device",
+	[FC_CABLE]	= "Cable2PC/CableStar 2 DVB-C",
+	[FC_AIR_DVBT]	= "Air2PC/AirStar 2 DVB-T",
+	[FC_AIR_ATSC1]	= "Air2PC/AirStar 2 ATSC 1st generation",
+	[FC_AIR_ATSC2]	= "Air2PC/AirStar 2 ATSC 2nd generation",
+	[FC_AIR_ATSC3]	= "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
+	[FC_SKY_REV23]	= "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)",
+	[FC_SKY_REV26]	= "Sky2PC/SkyStar 2 DVB-S rev 2.6",
+	[FC_SKY_REV27]	= "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
+	[FC_SKY_REV28]	= "Sky2PC/SkyStar 2 DVB-S rev 2.8",
 };
 
 static const char *flexcop_bus_names[] = {
-- 
cgit v1.2.3


From 3beb22a88b25f76e30ddde31f6436ac190b61235 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 22 May 2009 20:07:46 -0400
Subject: lnbp21: Add missing newline

From: Andy Walls <awalls@radix.net>

Reported-by: VDR User <user.vdr@gmail.com>

Priority: normal

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/frontends/lnbp21.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/lnbp21.c b/linux/drivers/media/dvb/frontends/lnbp21.c
index 1dcc56f32..71f607fe8 100644
--- a/linux/drivers/media/dvb/frontends/lnbp21.c
+++ b/linux/drivers/media/dvb/frontends/lnbp21.c
@@ -133,7 +133,7 @@ static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe,
 	/* override frontend ops */
 	fe->ops.set_voltage = lnbp21_set_voltage;
 	fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
-	printk(KERN_INFO "LNBx2x attached on addr=%x", lnbp21->i2c_addr);
+	printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
 
 	return fe;
 }
-- 
cgit v1.2.3


From 9c9fd460173573929daf32f42a502283a9aaae26 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 27 May 2009 15:32:23 -0300
Subject: Building system: Restore compilation with kernels older than 2.6.29

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Mostly due to ir-kdb-i2c, but also due to two new drivers, compilation
with kernels older than 2.6.29 were broken.

This quick and dirty changeset, generated semi-automatically, restaures
backport to the subsystem by adding lots of #ifs.

It is possible to write a much more small changeset that would restore
backport without adding so many ifs, but, due to the lack of time, this
will also solve it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smsir.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smsir.c b/linux/drivers/media/dvb/siano/smsir.c
index e3d776fee..ac876859c 100644
--- a/linux/drivers/media/dvb/siano/smsir.c
+++ b/linux/drivers/media/dvb/siano/smsir.c
@@ -274,7 +274,9 @@ int sms_ir_init(struct smscore_device_t *coredev)
 				coredev->ir.ir_kb_type);
 	input_dev->name = coredev->ir.name;
 	input_dev->phys = coredev->ir.name;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30)
 	input_dev->dev.parent = coredev->device;
+#endif
 
 	/* Key press events only */
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-- 
cgit v1.2.3


From 0291002e9dcce64956346325ef3c35478c6c95b5 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Thu, 28 May 2009 12:50:36 -0400
Subject: lgdt3305: fix 64bit division in function lgdt3305_set_if

From: Michael Krufky <mkrufky@kernellabs.com>

Priority: high

Signed-off-by: Michael Krufky <kernellabs.com>
---
 linux/drivers/media/dvb/frontends/lgdt3305.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/lgdt3305.c b/linux/drivers/media/dvb/frontends/lgdt3305.c
index f0c0c8199..b16410c64 100644
--- a/linux/drivers/media/dvb/frontends/lgdt3305.c
+++ b/linux/drivers/media/dvb/frontends/lgdt3305.c
@@ -19,6 +19,7 @@
  *
  */
 
+#include <asm/div64.h>
 #include "compat.h"
 #include <linux/dvb/frontend.h>
 #include "dvb_math.h"
@@ -497,27 +498,15 @@ static int lgdt3305_set_if(struct lgdt3305_state *state,
 
 	nco = if_freq_khz / 10;
 
-#define LGDT3305_64BIT_DIVISION_ENABLED 0
-	/* FIXME: 64bit division disabled to avoid linking error:
-	 * WARNING: "__udivdi3" [lgdt3305.ko] undefined!
-	 */
 	switch (param->u.vsb.modulation) {
 	case VSB_8:
-#if LGDT3305_64BIT_DIVISION_ENABLED
 		nco <<= 24;
-		nco /= 625;
-#else
-		nco *= ((1 << 24) / 625);
-#endif
+		do_div(nco, 625);
 		break;
 	case QAM_64:
 	case QAM_256:
-#if LGDT3305_64BIT_DIVISION_ENABLED
 		nco <<= 28;
-		nco /= 625;
-#else
-		nco *= ((1 << 28) / 625);
-#endif
+		do_div(nco, 625);
 		break;
 	default:
 		return -EINVAL;
-- 
cgit v1.2.3


From b8991839208bf9058df16c5afdc4abe46aed454d Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Sun, 31 May 2009 23:07:01 +0300
Subject: af9015: support for Genius TVGo DVB-T03

From: Antti Palosaari <crope@iki.fi>

Add USB ID (0458:4012) for Genius TVGo DVB-T03.
Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing.

Priority: normal

Signed-off-by: Antti Palosaari <crope@iki.fi>
Tested-by: Petr Vodicka <vodicka.petr@email.cz>
---
 linux/drivers/media/dvb/dvb-usb/af9015.c      | 8 +++++++-
 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c
index 5d9aacd0a..a50bf34af 100644
--- a/linux/drivers/media/dvb/dvb-usb/af9015.c
+++ b/linux/drivers/media/dvb/dvb-usb/af9015.c
@@ -1268,6 +1268,7 @@ static struct usb_device_id af9015_usb_table[] = {
 	{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)},
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_CONCEPTRONIC_CTVDIGRCU)},
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_MC810)},
+	{USB_DEVICE(USB_VID_KYE,       USB_PID_GENIUS_TVGO_DVB_T03)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1538,7 +1539,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 3, /* max 9 */
+		.num_device_descs = 4, /* max 9 */
 		.devices = {
 			{
 				.name = "AverMedia AVerTV Volar GPS 805 (A805)",
@@ -1556,6 +1557,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.cold_ids = {&af9015_usb_table[23], NULL},
 				.warm_ids = {NULL},
 			},
+			{
+				.name = "Genius TVGo DVB-T03",
+				.cold_ids = {&af9015_usb_table[24], NULL},
+				.warm_ids = {NULL},
+			},
 		}
 	},
 };
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 7340ef4cd..9593b7289 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -98,6 +98,7 @@
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
+#define USB_PID_GENIUS_TVGO_DVB_T03			0x4012
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
 #define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1
 #define USB_PID_INTEL_CE9500				0x9500
-- 
cgit v1.2.3


From 7ef1e386396d4ebc645310511099bf2526e519c4 Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Sat, 6 Jun 2009 16:31:34 +0400
Subject: TS continuity check: show error message when discontinuity detected
 or TEI flag detected in header

Signed-off-by: Abylay Ospan <aospan@netup.ru>
---
 linux/drivers/media/dvb/dvb-core/dvb_demux.c | 42 ++++++++++++++++++++++++++++
 linux/drivers/media/dvb/dvb-core/dvb_demux.h |  4 +++
 2 files changed, 46 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.c b/linux/drivers/media/dvb/dvb-core/dvb_demux.c
index e2eca0b1f..cfe2768d2 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -38,6 +38,16 @@
 */
 // #define DVB_DEMUX_SECTION_LOSS_LOG
 
+static int dvb_demux_tscheck;
+module_param(dvb_demux_tscheck, int, 0644);
+MODULE_PARM_DESC(dvb_demux_tscheck,
+		"enable transport stream continuity and TEI check");
+
+#define dprintk_tscheck(x...) do {                              \
+		if (dvb_demux_tscheck && printk_ratelimit())    \
+			printk(x);                              \
+	} while (0)
+
 /******************************************************************************
  * static inlined helper functions
  ******************************************************************************/
@@ -376,6 +386,36 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 	u16 pid = ts_pid(buf);
 	int dvr_done = 0;
 
+	if (dvb_demux_tscheck) {
+		if (!demux->cnt_storage)
+			demux->cnt_storage = vmalloc(MAX_PID + 1);
+
+		if (!demux->cnt_storage) {
+			printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
+			dvb_demux_tscheck = 0;
+			goto no_dvb_demux_tscheck;
+		}
+
+		/* check pkt counter */
+		if (pid < MAX_PID) {
+			if (buf[1] & 0x80)
+				dprintk_tscheck("TEI detected. "
+						"PID=0x%x data1=0x%x\n",
+						pid, buf[1]);
+
+			if ((buf[3] & 0xf) != demux->cnt_storage[pid])
+				dprintk_tscheck("TS packet counter mismatch. "
+						"PID=0x%x expected 0x%x "
+						"got 0x%x\n",
+						pid, demux->cnt_storage[pid],
+						buf[3] & 0xf);
+
+			demux->cnt_storage[pid] = ((buf[3] & 0xf) + 1)&0xf;
+		};
+		/* end check */
+	};
+no_dvb_demux_tscheck:
+
 	list_for_each_entry(feed, &demux->feed_list, list_head) {
 		if ((feed->pid != pid) && (feed->pid != 0x2000))
 			continue;
@@ -1160,6 +1200,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux)
 	int i;
 	struct dmx_demux *dmx = &dvbdemux->dmx;
 
+	dvbdemux->cnt_storage = NULL;
 	dvbdemux->users = 0;
 	dvbdemux->filter = vmalloc(dvbdemux->filternum * sizeof(struct dvb_demux_filter));
 
@@ -1226,6 +1267,7 @@ EXPORT_SYMBOL(dvb_dmx_init);
 
 void dvb_dmx_release(struct dvb_demux *dvbdemux)
 {
+	vfree(dvbdemux->cnt_storage);
 	vfree(dvbdemux->filter);
 	vfree(dvbdemux->feed);
 }
diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.h b/linux/drivers/media/dvb/dvb-core/dvb_demux.h
index 933397c24..1e0ade4ec 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_demux.h
+++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.h
@@ -43,6 +43,8 @@
 
 #define DVB_DEMUX_MASK_MAX 18
 
+#define MAX_PID 0x1fff
+
 struct dvb_demux_filter {
 	struct dmx_section_filter filter;
 	u8 maskandmode[DMX_MAX_FILTER_SIZE];
@@ -128,6 +130,8 @@ struct dvb_demux {
 
 	struct mutex mutex;
 	spinlock_t lock;
+
+	uint8_t *cnt_storage; /* for TS continuity check */
 };
 
 int dvb_dmx_init(struct dvb_demux *dvbdemux);
-- 
cgit v1.2.3


From 29da0924e21b20128e9ce9eca275630941586d84 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@kernellabs.com>
Date: Thu, 11 Jun 2009 10:33:00 +0200
Subject: b2c2: Fix problems with frontend attachment

From: Trent Piepho <xyzzy@speakeasy.org>

The frontend attachment code didn't handle cases where the frontend
partially failed to attach.  For instance, when the demod was attached
successfully but the tuner driver wasn't compiled or fails to init for some
reason.  In these cases we try to clean up the partial attachment and fail
instead of proceeding with a broken frontend.

If frontend registration fails, clean up with dvb_frontend_detach() rather
than just calling the frontend's main release method.  The former does some
additional stuff, like release an attached tuner and take care of putting
symbols when dynamic binding is used.

In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that
gets set before skystar2_rev23_attach() is called.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
---
 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 196 ++++++++++++++----------
 1 file changed, 113 insertions(+), 83 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 3f485bf13..efb4a6c2b 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -175,23 +175,23 @@ static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
 	return 0;
 }
 
-static void skystar2_rev23_attach(struct flexcop_device *fc,
+static int skystar2_rev23_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
-	fc->fe = dvb_attach(mt312_attach,
-			&skystar23_samsung_tbdu18132_config, i2c);
+	fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
 	if (fc->fe != NULL) {
 		struct dvb_frontend_ops *ops = &fc->fe->ops;
-		ops->tuner_ops.set_params \
-			= skystar23_samsung_tbdu18132_tuner_set_params;
+		ops->tuner_ops.set_params   =
+			skystar23_samsung_tbdu18132_tuner_set_params;
 		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
 		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
 		ops->set_tone               = flexcop_set_tone;
 		ops->set_voltage            = flexcop_set_voltage;
 		fc->fe_sleep                = ops->sleep;
 		ops->sleep                  = flexcop_sleep;
-		fc->dev_type                = FC_SKY_REV23;
+		return 1;
 	}
+	return 0;
 }
 #endif
 
@@ -307,7 +307,7 @@ static struct stv0299_config samsung_tbmu24112_config = {
 	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
 };
 
-static void skystar2_rev26_attach(struct flexcop_device *fc,
+static int skystar2_rev26_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
@@ -317,7 +317,9 @@ static void skystar2_rev26_attach(struct flexcop_device *fc,
 		ops->set_voltage = flexcop_set_voltage;
 		fc->fe_sleep = ops->sleep;
 		ops->sleep = flexcop_sleep;
+		return 1;
 	}
+	return 0;
 }
 #endif
 
@@ -334,43 +336,54 @@ static struct itd1000_config skystar2_rev2_7_itd1000_config = {
 	.i2c_address = 0x61,
 };
 
-static void skystar2_rev27_attach(struct flexcop_device *fc,
+static int skystar2_rev27_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
+	flexcop_ibi_value r108;
+	struct i2c_adapter *i2c_tuner;
+
 	/* enable no_base_addr - no repeated start when reading */
 	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(s5h1420_attach,
-		&skystar2_rev2_7_s5h1420_config, i2c);
-	if (fc->fe != NULL) {
-		flexcop_ibi_value r108;
-		struct i2c_adapter *i2c_tuner \
-		= s5h1420_get_tuner_i2c_adapter(fc->fe);
-		struct dvb_frontend_ops *ops = &fc->fe->ops;
+	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config,
+			    i2c);
+	if (!fc->fe)
+		goto fail;
 
-		fc->fe_sleep = ops->sleep;
-		ops->sleep   = flexcop_sleep;
-
-		/* enable no_base_addr - no repeated start when reading */
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* the ITD1000 requires a lower i2c clock - is it a problem ? */
-		r108.raw = 0x00000506;
-		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
-		if (i2c_tuner) {
-			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
-				&skystar2_rev2_7_itd1000_config) == NULL)
-				err("ITD1000 could NOT be attached");
-			else
-				info("ITD1000 successfully attached");
-		}
-	} else
-		fc->fc_i2c_adap[0].no_base_addr = 0;
-		/* for the next devices we need it again */
+	i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
+	if (!i2c_tuner)
+		goto fail;
+
+	fc->fe_sleep = fc->fe->ops.sleep;
+	fc->fe->ops.sleep = flexcop_sleep;
+
+	/* enable no_base_addr - no repeated start when reading */
+	fc->fc_i2c_adap[2].no_base_addr = 1;
+	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+			0x08, 1, 1)) {
+		err("ISL6421 could NOT be attached");
+		goto fail_isl;
+	}
+	info("ISL6421 successfully attached");
+
+	/* the ITD1000 requires a lower i2c clock - is it a problem ? */
+	r108.raw = 0x00000506;
+	fc->write_ibi_reg(fc, tw_sm_c_108, r108);
+	if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
+			&skystar2_rev2_7_itd1000_config)) {
+		err("ITD1000 could NOT be attached");
+		/* Should i2c clock be restored? */
+		goto fail_isl;
+	}
+	info("ITD1000 successfully attached");
+
+	return 1;
+
+fail_isl:
+	fc->fc_i2c_adap[2].no_base_addr = 0;
+fail:
+	/* for the next devices we need it again */
+	fc->fc_i2c_adap[0].no_base_addr = 0;
+	return 0;
 }
 #endif
 
@@ -387,32 +400,38 @@ static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
 	.xtal_khz = 10111,
 };
 
-static void skystar2_rev28_attach(struct flexcop_device *fc,
+static int skystar2_rev28_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
-	fc->fe = dvb_attach(cx24123_attach,
-			&skystar2_rev2_8_cx24123_config, i2c);
-	if (fc->fe != NULL) {
-		struct i2c_adapter *i2c_tuner \
-			= cx24123_get_tuner_i2c_adapter(fc->fe);
-		if (i2c_tuner != NULL) {
-			if (dvb_attach(cx24113_attach, fc->fe,
-						&skystar2_rev2_8_cx24113_config,
-						i2c_tuner) == NULL)
-				err("CX24113 could NOT be attached");
-			else
-				info("CX24113 successfully attached");
-		}
+	struct i2c_adapter *i2c_tuner;
+
+	fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config,
+			    i2c);
+	if (!fc->fe)
+		return 0;
+
+	i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);;
+	if (!i2c_tuner)
+		return 0;
 
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
+	if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config,
+			i2c_tuner)) {
+		err("CX24113 could NOT be attached");
+		return 0;
+	}
+	info("CX24113 successfully attached");
+
+	fc->fc_i2c_adap[2].no_base_addr = 1;
+	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+			0x08, 0, 0)) {
+		err("ISL6421 could NOT be attached");
+		fc->fc_i2c_adap[2].no_base_addr = 0;
+		return 0;
+	}
+	info("ISL6421 successfully attached");
 	/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
-	}
+	return 1;
 }
 #endif
 
@@ -466,12 +485,15 @@ static struct mt352_config samsung_tdtc9251dh0_config = {
 	.demod_init    = samsung_tdtc9251dh0_demod_init,
 };
 
-static void airstar_dvbt_attach(struct flexcop_device *fc,
+static int airstar_dvbt_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL)
+	if (fc->fe != NULL) {
 		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
+		return 1;
+	}
+	return 0;
 }
 #endif
 
@@ -489,10 +511,11 @@ static struct bcm3510_config air2pc_atsc_first_gen_config = {
 	.request_firmware = flexcop_fe_request_firmware,
 };
 
-static void airstar_atsc1_attach(struct flexcop_device *fc,
+static int airstar_atsc1_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
+	return fc->fe != NULL;
 }
 #endif
 
@@ -502,13 +525,15 @@ static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
 
-static void airstar_atsc2_attach(struct flexcop_device *fc,
+static int airstar_atsc2_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
-	if (fc->fe != NULL)
-		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
-				DVB_PLL_SAMSUNG_TBMV);
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+			    DVB_PLL_SAMSUNG_TBMV);
 }
 #endif
 
@@ -521,14 +546,15 @@ static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.clock_polarity_flip = 1,
 };
 
-static void airstar_atsc3_attach(struct flexcop_device *fc,
+static int airstar_atsc3_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
-	if (fc->fe != NULL) {
-		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
-				TUNER_LG_TDVS_H06XF);
-	}
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
+			    TUNER_LG_TDVS_H06XF);
 }
 #endif
 
@@ -659,22 +685,24 @@ static struct stv0297_config alps_tdee4_stv0297_config = {
 	.inittab = alps_tdee4_stv0297_inittab,
 };
 
-static void cablestar2_attach(struct flexcop_device *fc,
+static int cablestar2_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (fc->fe != NULL)
-		fc->fe->ops.tuner_ops.set_params \
-		= alps_tdee4_stv0297_tuner_set_params;
-	else
+	if (!fc->fe) {
+		/* Reset for next frontend to try */
 		fc->fc_i2c_adap[0].no_base_addr = 0;
+		return 0;
+	}
+	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
+	return 1;
 }
 #endif
 
 static struct {
 	flexcop_device_type_t type;
-	void (*attach)(struct flexcop_device *, struct i2c_adapter *);
+	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
 #if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
@@ -713,9 +741,13 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;
-		flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap);
-		if (fc->fe != NULL)
+		if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap))
 			goto fe_found;
+		/* Clean up partially attached frontend */
+		if (fc->fe) {
+			dvb_frontend_detach(fc->fe);
+			fc->fe = NULL;
+		}
 	}
 	fc->dev_type = FC_UNK;
 	err("no frontend driver found for this B2C2/FlexCop adapter");
@@ -724,10 +756,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 fe_found:
 	info("found '%s' .", fc->fe->ops.info.name);
 	if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
-		struct dvb_frontend_ops *ops = &fc->fe->ops;
 		err("frontend registration failed!");
-		if (ops->release != NULL)
-			ops->release(fc->fe);
+		dvb_frontend_detach(fc->fe);
 		fc->fe = NULL;
 		return -EINVAL;
 	}
-- 
cgit v1.2.3


From aa180367f345706e7f042506f21cbab42c6e233a Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@me.by>
Date: Sat, 13 Jun 2009 14:10:24 +0300
Subject: Remote control debugging for dw2102 driver based USB cards

From: Igor M. Liplianin <liplianin@me.by>

Remote control debugging for dw2102 driver based USB cards
It includes DVBWorld, TeVii, Terratec and others.
Type 'modprobe dvb-usb-dw2102 debug=4', then look at dmesg output.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
---
 linux/drivers/media/dvb/dvb-usb/dw2102.c | 27 ++++++++++++++++++++-------
 linux/drivers/media/dvb/dvb-usb/dw2102.h |  1 +
 2 files changed, 21 insertions(+), 7 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c
index 2b8ee587b..725d5c00d 100644
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c
@@ -51,7 +51,9 @@ struct dw210x_rc_keys {
 /* debug */
 static int dvb_usb_dw2102_debug;
 module_param_named(debug, dvb_usb_dw2102_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS);
+MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))."
+						DVB_USB_DEBUG_STATUS);
+
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -565,26 +567,37 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct dw210x_state *st = d->priv;
 	u8 key[2];
-	struct i2c_msg msg[] = {
-		{.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
-		.len = 2},
+	struct i2c_msg msg = {
+		.addr = DW2102_RC_QUERY,
+		.flags = I2C_M_RD,
+		.buf = key,
+		.len = 2
 	};
 	int i;
 
 	*state = REMOTE_NO_KEY_PRESSED;
-	if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
+	if (dw2102_i2c_transfer(&d->i2c_adap, &msg, 1) == 1) {
 		for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) {
-			if (dw210x_rc_keys[i].data == msg[0].buf[0]) {
+			if (dw210x_rc_keys[i].data == msg.buf[0]) {
 				*state = REMOTE_KEY_PRESSED;
 				*event = dw210x_rc_keys[i].event;
 				st->last_key_pressed =
 					dw210x_rc_keys[i].event;
 				break;
 			}
+
 		st->last_key_pressed = 0;
 		}
+
+		if ((*state) == REMOTE_KEY_PRESSED)
+			deb_rc("%s: found rc key: %x, %x, event: %x\n",
+					__func__, key[0], key[1], (*event));
+		else if (key[0] != 0xff)
+			deb_rc("%s: unknown rc key: %x, %x\n",
+					__func__, key[0], key[1]);
+
 	}
-	/* info("key: %x %x\n",key[0],key[1]); */
+
 	return 0;
 }
 
diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.h b/linux/drivers/media/dvb/dvb-usb/dw2102.h
index e3370734e..5cd0b0eb6 100644
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.h
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.h
@@ -5,4 +5,5 @@
 #include "dvb-usb.h"
 
 #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_dw2102_debug, 0x04, args)
 #endif
-- 
cgit v1.2.3


From 8a7773709ee61adb37f483c166f80d1d9f6ef25b Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@me.by>
Date: Mon, 15 Jun 2009 01:41:22 +0300
Subject: Add keymaps for TeVii and TBS USB DVB-S/S2 cards

From: Igor M. Liplianin <liplianin@me.by>

Add keymaps for TeVii and TBS USB DVB-S/S2 cards
Also module parameter named keymap inserted for override default keymap.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
---
 linux/drivers/media/dvb/dvb-usb/dw2102.c | 126 +++++++++++++++++++++++++++----
 1 file changed, 110 insertions(+), 16 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c
index 725d5c00d..cf1fc5e83 100644
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c
@@ -40,12 +40,9 @@
 #define DW2102_VOLTAGE_CTRL (0x1800)
 #define DW2102_RC_QUERY (0x1a00)
 
-struct dw210x_state {
-	u32 last_key_pressed;
-};
-struct dw210x_rc_keys {
-	u32 keycode;
-	u32 event;
+struct dvb_usb_rc_keys_table {
+	struct dvb_usb_rc_key *rc_keys;
+	int rc_keys_size;
 };
 
 /* debug */
@@ -54,6 +51,10 @@ module_param_named(debug, dvb_usb_dw2102_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))."
 						DVB_USB_DEBUG_STATUS);
 
+/* keymaps */
+static int ir_keymap;
+module_param_named(keymap, ir_keymap, int, 0644);
+MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs  ...");
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -474,6 +475,7 @@ static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
 }
 
 static struct dvb_usb_device_properties dw2102_properties;
+static struct dvb_usb_device_properties dw2104_properties;
 
 static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 {
@@ -558,14 +560,103 @@ static struct dvb_usb_rc_key dw210x_rc_keys[] = {
 	{ 0xf8, 0x40, KEY_F },		/*full*/
 	{ 0xf8, 0x1e, KEY_W },		/*tvmode*/
 	{ 0xf8, 0x1b, KEY_B },		/*recall*/
+};
 
+static struct dvb_usb_rc_key tevii_rc_keys[] = {
+	{ 0xf8, 0x0a, KEY_POWER },
+	{ 0xf8, 0x0c, KEY_MUTE },
+	{ 0xf8, 0x11, KEY_1 },
+	{ 0xf8, 0x12, KEY_2 },
+	{ 0xf8, 0x13, KEY_3 },
+	{ 0xf8, 0x14, KEY_4 },
+	{ 0xf8, 0x15, KEY_5 },
+	{ 0xf8, 0x16, KEY_6 },
+	{ 0xf8, 0x17, KEY_7 },
+	{ 0xf8, 0x18, KEY_8 },
+	{ 0xf8, 0x19, KEY_9 },
+	{ 0xf8, 0x10, KEY_0 },
+	{ 0xf8, 0x1c, KEY_MENU },
+	{ 0xf8, 0x0f, KEY_VOLUMEDOWN },
+	{ 0xf8, 0x1a, KEY_LAST },
+	{ 0xf8, 0x0e, KEY_OPEN },
+	{ 0xf8, 0x04, KEY_RECORD },
+	{ 0xf8, 0x09, KEY_VOLUMEUP },
+	{ 0xf8, 0x08, KEY_CHANNELUP },
+	{ 0xf8, 0x07, KEY_PVR },
+	{ 0xf8, 0x0b, KEY_TIME },
+	{ 0xf8, 0x02, KEY_RIGHT },
+	{ 0xf8, 0x03, KEY_LEFT },
+	{ 0xf8, 0x00, KEY_UP },
+	{ 0xf8, 0x1f, KEY_OK },
+	{ 0xf8, 0x01, KEY_DOWN },
+	{ 0xf8, 0x05, KEY_TUNER },
+	{ 0xf8, 0x06, KEY_CHANNELDOWN },
+	{ 0xf8, 0x40, KEY_PLAYPAUSE },
+	{ 0xf8, 0x1e, KEY_REWIND },
+	{ 0xf8, 0x1b, KEY_FAVORITES },
+	{ 0xf8, 0x1d, KEY_BACK },
+	{ 0xf8, 0x4d, KEY_FASTFORWARD },
+	{ 0xf8, 0x44, KEY_EPG },
+	{ 0xf8, 0x4c, KEY_INFO },
+	{ 0xf8, 0x41, KEY_AB },
+	{ 0xf8, 0x43, KEY_AUDIO },
+	{ 0xf8, 0x45, KEY_SUBTITLE },
+	{ 0xf8, 0x4a, KEY_LIST },
+	{ 0xf8, 0x46, KEY_F1 },
+	{ 0xf8, 0x47, KEY_F2 },
+	{ 0xf8, 0x5e, KEY_F3 },
+	{ 0xf8, 0x5c, KEY_F4 },
+	{ 0xf8, 0x52, KEY_F5 },
+	{ 0xf8, 0x5a, KEY_F6 },
+	{ 0xf8, 0x56, KEY_MODE },
+	{ 0xf8, 0x58, KEY_SWITCHVIDEOMODE },
 };
 
+static struct dvb_usb_rc_key tbs_rc_keys[] = {
+	{ 0xf8,	0x84, KEY_POWER },
+	{ 0xf8,	0x94, KEY_MUTE },
+	{ 0xf8,	0x87, KEY_1 },
+	{ 0xf8,	0x86, KEY_2 },
+	{ 0xf8,	0x85, KEY_3 },
+	{ 0xf8,	0x8b, KEY_4 },
+	{ 0xf8,	0x8a, KEY_5 },
+	{ 0xf8,	0x89, KEY_6 },
+	{ 0xf8,	0x8f, KEY_7 },
+	{ 0xf8,	0x8e, KEY_8 },
+	{ 0xf8,	0x8d, KEY_9 },
+	{ 0xf8, 0x92, KEY_0 },
+	{ 0xf8, 0x96, KEY_CHANNELUP },
+	{ 0xf8, 0x91, KEY_CHANNELDOWN },
+	{ 0xf8, 0x93, KEY_VOLUMEUP },
+	{ 0xf8, 0x8c, KEY_VOLUMEDOWN },
+	{ 0xf8, 0x83, KEY_RECORD },
+	{ 0xf8, 0x98, KEY_PAUSE  },
+	{ 0xf8, 0x99, KEY_OK },
+	{ 0xf8, 0x9a, KEY_SHUFFLE },
+	{ 0xf8, 0x81, KEY_UP },
+	{ 0xf8, 0x90, KEY_LEFT },
+	{ 0xf8, 0x82, KEY_RIGHT },
+	{ 0xf8, 0x88, KEY_DOWN },
+	{ 0xf8, 0x95, KEY_FAVORITES },
+	{ 0xf8, 0x97, KEY_SUBTITLE },
+	{ 0xf8, 0x9d, KEY_ZOOM },
+	{ 0xf8, 0x9f, KEY_EXIT },
+	{ 0xf8, 0x9e, KEY_MENU },
+	{ 0xf8, 0x9c, KEY_EPG },
+	{ 0xf8, 0x80, KEY_PREVIOUS },
+	{ 0xf8, 0x9b, KEY_MODE }
+};
 
+static struct dvb_usb_rc_keys_table keys_tables[] = {
+	{ dw210x_rc_keys, ARRAY_SIZE(dw210x_rc_keys) },
+	{ tevii_rc_keys, ARRAY_SIZE(tevii_rc_keys) },
+	{ tbs_rc_keys, ARRAY_SIZE(tbs_rc_keys) },
+};
 
 static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct dw210x_state *st = d->priv;
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	int keymap_size = d->props.rc_key_map_size;
 	u8 key[2];
 	struct i2c_msg msg = {
 		.addr = DW2102_RC_QUERY,
@@ -574,19 +665,21 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		.len = 2
 	};
 	int i;
+	/* override keymap */
+	if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) {
+		keymap = keys_tables[ir_keymap - 1].rc_keys ;
+		keymap_size = keys_tables[ir_keymap - 1].rc_keys_size;
+	}
 
 	*state = REMOTE_NO_KEY_PRESSED;
 	if (dw2102_i2c_transfer(&d->i2c_adap, &msg, 1) == 1) {
-		for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) {
-			if (dw210x_rc_keys[i].data == msg.buf[0]) {
+		for (i = 0; i < keymap_size ; i++) {
+			if (keymap[i].data == msg.buf[0]) {
 				*state = REMOTE_KEY_PRESSED;
-				*event = dw210x_rc_keys[i].event;
-				st->last_key_pressed =
-					dw210x_rc_keys[i].event;
+				*event = keymap[i].event;
 				break;
 			}
 
-		st->last_key_pressed = 0;
 		}
 
 		if ((*state) == REMOTE_KEY_PRESSED)
@@ -667,8 +760,11 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		}
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
-		case USB_PID_DW2104:
 		case 0xd650:
+			dw2104_properties.rc_key_map = tevii_rc_keys;
+			dw2104_properties.rc_key_map_size =
+					ARRAY_SIZE(tevii_rc_keys);
+		case USB_PID_DW2104:
 			reset = 1;
 			dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
 					DW210X_WRITE_MSG);
@@ -725,7 +821,6 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.firmware = "dvb-usb-dw2102.fw",
-	.size_of_priv = sizeof(struct dw210x_state),
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw2102_serit_i2c_algo,
@@ -777,7 +872,6 @@ static struct dvb_usb_device_properties dw2104_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.firmware = "dvb-usb-dw2104.fw",
-	.size_of_priv = sizeof(struct dw210x_state),
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw2104_i2c_algo,
-- 
cgit v1.2.3


From f8eb1c250a545b18aadc3d0962b49b33759a13cc Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@me.by>
Date: Mon, 15 Jun 2009 02:51:45 +0300
Subject: Add support for DVBWorld DVB-C USB Cable card.

From: Igor M. Liplianin <liplianin@me.by>

DVBWorld DVB-C USB Cable card contains TUA6034 tuner,
TDA10023 demod and  Cypress FX-2 controller.
http://www.worlddvb.com/product/htm/usbc.htm

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
---
 linux/drivers/media/dvb/dvb-usb/dw2102.c | 179 +++++++++++++++++++++++++++++--
 1 file changed, 168 insertions(+), 11 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c
index cf1fc5e83..0fc9be43a 100644
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1,7 +1,7 @@
 /* DVB USB framework compliant Linux driver for the
-*	DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card
-*
-* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*	DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
+*	TeVii S600, S650 Cards
+* Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by)
 *
 *	This program is free software; you can redistribute it and/or modify it
 *	under the terms of the GNU General Public License as published by the
@@ -17,6 +17,7 @@
 #include "stb6000.h"
 #include "eds1547.h"
 #include "cx24116.h"
+#include "tda1002x.h"
 
 #ifndef USB_PID_DW2102
 #define USB_PID_DW2102 0x2102
@@ -26,10 +27,18 @@
 #define USB_PID_DW2104 0x2104
 #endif
 
+#ifndef USB_PID_DW3101
+#define USB_PID_DW3101 0x3101
+#endif
+
 #ifndef USB_PID_CINERGY_S
 #define USB_PID_CINERGY_S 0x0064
 #endif
 
+#ifndef USB_PID_TEVII_S650
+#define USB_PID_TEVII_S650 0xd650
+#endif
+
 #define DW210X_READ_MSG 0
 #define DW210X_WRITE_MSG 1
 
@@ -82,7 +91,7 @@ static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
 static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		int num)
 {
-struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
 	int i = 0, ret = 0;
 	u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
 	u16 value;
@@ -208,6 +217,7 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
 	mutex_unlock(&d->i2c_mutex);
 	return num;
 }
+
 static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
@@ -222,7 +232,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
 	case 2: {
 		/* read */
 		/* first write first register number */
-		u8 ibuf [msg[1].len + 2], obuf[3];
+		u8 ibuf[msg[1].len + 2], obuf[3];
 		obuf[0] = 0xd0;
 		obuf[1] = msg[0].len;
 		obuf[2] = msg[0].buf[0];
@@ -296,7 +306,7 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
 	case 2: {
 		/* read */
 		/* first write first register number */
-		u8 ibuf [msg[1].len + 2], obuf[3];
+		u8 ibuf[msg[1].len + 2], obuf[3];
 		obuf[0] = 0xaa;
 		obuf[1] = msg[0].len;
 		obuf[2] = msg[0].buf[0];
@@ -363,6 +373,69 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
 	return num;
 }
 
+static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+								int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret = 0, i;
+
+	if (!d)
+		return -ENODEV;
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	switch (num) {
+	case 2: {
+		/* read */
+		/* first write first register number */
+		u8 ibuf[msg[1].len + 2], obuf[3];
+		obuf[0] = msg[0].addr << 1;
+		obuf[1] = msg[0].len;
+		obuf[2] = msg[0].buf[0];
+		ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+				obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+		/* second read registers */
+		ret = dw210x_op_rw(d->udev, 0xc3, 0x19 , 0,
+				ibuf, msg[1].len + 2, DW210X_READ_MSG);
+		memcpy(msg[1].buf, ibuf + 2, msg[1].len);
+
+		break;
+	}
+	case 1:
+		switch (msg[0].addr) {
+		case 0x60:
+		case 0x0c: {
+			/* write to register */
+			u8 obuf[msg[0].len + 2];
+			obuf[0] = msg[0].addr << 1;
+			obuf[1] = msg[0].len;
+			memcpy(obuf + 2, msg[0].buf, msg[0].len);
+			ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+					obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+			break;
+		}
+		case(DW2102_RC_QUERY): {
+			u8 ibuf[2];
+			ret  = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+					ibuf, 2, DW210X_READ_MSG);
+			memcpy(msg[0].buf, ibuf , 2);
+			break;
+		}
+		}
+
+		break;
+	}
+
+	for (i = 0; i < num; i++) {
+		deb_xfer("%02x:%02x: %s ", i, msg[i].addr,
+				msg[i].flags == 0 ? ">>>" : "<<<");
+		debug_dump(msg[i].buf, msg[i].len, deb_xfer);
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return num;
+}
+
 static u32 dw210x_i2c_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C;
@@ -400,6 +473,14 @@ static struct i2c_algorithm dw2104_i2c_algo = {
 #endif
 };
 
+static struct i2c_algorithm dw3101_i2c_algo = {
+	.master_xfer = dw3101_i2c_transfer,
+	.functionality = dw210x_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+	.algo_control = dummy_algo_control,
+#endif
+};
+
 static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 {
 	int i;
@@ -419,6 +500,7 @@ static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 			debug_dump(eepromline, 16, deb_xfer);
 		}
 	}
+
 	memcpy(mac, eeprom + 8, 6);
 	return 0;
 };
@@ -463,6 +545,11 @@ static struct si21xx_config serit_sp1511lhb_config = {
 
 };
 
+static struct tda10023_config dw3101_tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 1,
+};
+
 static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
 {
 	if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
@@ -513,6 +600,17 @@ static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 	return -EIO;
 }
 
+static int dw3101_frontend_attach(struct dvb_usb_adapter *d)
+{
+	d->fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config,
+				&d->dev->i2c_adap, 0x48);
+	if (d->fe != NULL) {
+		info("Attached tda10023!\n");
+		return 0;
+	}
+	return -EIO;
+}
+
 static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -528,6 +626,14 @@ static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+		&adap->dev->i2c_adap, DVB_PLL_TUA6034);
+
+	return 0;
+}
+
 static struct dvb_usb_rc_key dw210x_rc_keys[] = {
 	{ 0xf8,	0x0a, KEY_Q },		/*power*/
 	{ 0xf8,	0x0c, KEY_M },		/*mute*/
@@ -697,9 +803,10 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 static struct usb_device_id dw2102_table[] = {
 	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
 	{USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
-	{USB_DEVICE(USB_VID_CYPRESS, 0x2104)},
-	{USB_DEVICE(0x9022, 0xd650)},
+	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)},
+	{USB_DEVICE(0x9022, USB_PID_TEVII_S650)},
 	{USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
+	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
 	{ }
 };
 
@@ -760,7 +867,7 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		}
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
-		case 0xd650:
+		case USB_PID_TEVII_S650:
 			dw2104_properties.rc_key_map = tevii_rc_keys;
 			dw2104_properties.rc_key_map_size =
 					ARRAY_SIZE(tevii_rc_keys);
@@ -768,6 +875,8 @@ static int dw2102_load_firmware(struct usb_device *dev,
 			reset = 1;
 			dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
 					DW210X_WRITE_MSG);
+			/* break omitted intentionally */
+		case USB_PID_DW3101:
 			reset = 0;
 			dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
 					DW210X_WRITE_MSG);
@@ -811,6 +920,7 @@ static int dw2102_load_firmware(struct usb_device *dev,
 					DW210X_READ_MSG);
 			break;
 		}
+
 		msleep(100);
 		kfree(p);
 	}
@@ -834,7 +944,7 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.num_adapters = 1,
 	.download_firmware = dw2102_load_firmware,
 	.read_mac_address = dw210x_read_mac_address,
-		.adapter = {
+	.adapter = {
 		{
 			.frontend_attach = dw2102_frontend_attach,
 			.streaming_ctrl = NULL,
@@ -915,12 +1025,57 @@ static struct dvb_usb_device_properties dw2104_properties = {
 	}
 };
 
+static struct dvb_usb_device_properties dw3101_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.firmware = "dvb-usb-dw3101.fw",
+	.no_reconnect = 1,
+
+	.i2c_algo = &dw3101_i2c_algo,
+	.rc_key_map = dw210x_rc_keys,
+	.rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys),
+	.rc_interval = 150,
+	.rc_query = dw2102_rc_query,
+
+	.generic_bulk_ctrl_endpoint = 0x81,
+	/* parameter for the MPEG2-data transfer */
+	.num_adapters = 1,
+	.download_firmware = dw2102_load_firmware,
+	.read_mac_address = dw210x_read_mac_address,
+	.adapter = {
+		{
+			.frontend_attach = dw3101_frontend_attach,
+			.streaming_ctrl = NULL,
+			.tuner_attach = dw3101_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		}
+	},
+	.num_device_descs = 1,
+	.devices = {
+		{ "DVBWorld DVB-C 3101 USB2.0",
+			{&dw2102_table[5], NULL},
+			{NULL},
+		},
+	}
+};
+
 static int dw2102_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
 	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
 			THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &dw2104_properties,
+			THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &dw3101_properties,
 			THIS_MODULE, NULL, adapter_nr)) {
 		return 0;
 	}
@@ -952,6 +1107,8 @@ module_init(dw2102_module_init);
 module_exit(dw2102_module_exit);
 
 MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
-MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
+				" DVB-C 3101 USB2.0,"
+				" TeVii S600, S650 USB2.0 devices");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 279ab5cb24214bc30fc83bb50f63d418498f00e8 Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@me.by>
Date: Mon, 15 Jun 2009 03:34:12 +0300
Subject: Add support for yet another SDMC DM1105 based DVB-S card.

From: Igor M. Liplianin <liplianin@me.by>

Add support for SDMC DM1105 based DVB-S cards with PCI ID 195d:1105
Also create separate workqueue for demuxing.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
---
 linux/drivers/media/dvb/dm1105/dm1105.c | 121 +++++++++++++++++++++-----------
 1 file changed, 80 insertions(+), 41 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dm1105/dm1105.c b/linux/drivers/media/dvb/dm1105/dm1105.c
index ca1048fd4..17edeb66b 100644
--- a/linux/drivers/media/dvb/dm1105/dm1105.c
+++ b/linux/drivers/media/dvb/dm1105/dm1105.c
@@ -51,6 +51,9 @@
 #ifndef PCI_VENDOR_ID_TRIGEM
 #define PCI_VENDOR_ID_TRIGEM	0x109f
 #endif
+#ifndef PCI_VENDOR_ID_AXESS
+#define PCI_VENDOR_ID_AXESS	0x195d
+#endif
 #ifndef PCI_DEVICE_ID_DM1105
 #define PCI_DEVICE_ID_DM1105	0x036f
 #endif
@@ -60,6 +63,9 @@
 #ifndef PCI_DEVICE_ID_DW2004
 #define PCI_DEVICE_ID_DW2004	0x2004
 #endif
+#ifndef PCI_DEVICE_ID_DM05
+#define PCI_DEVICE_ID_DM05	0x1105
+#endif
 /* ----------------------------------------------- */
 /* sdmc dm1105 registers */
 
@@ -150,6 +156,11 @@
 #define DM1105_LNB_13V				0x00010100
 #define DM1105_LNB_18V				0x00000100
 
+/* GPIO's for LNB power control for Axess DM05 */
+#define DM05_LNB_MASK				0x00000000
+#define DM05_LNB_13V				0x00020000
+#define DM05_LNB_18V				0x00030000
+
 static int ir_debug;
 module_param(ir_debug, int, 0644);
 MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
@@ -188,6 +199,8 @@ struct dm1105dvb {
 
 	/* irq */
 	struct work_struct work;
+	struct workqueue_struct *wq;
+	char wqn[16];
 
 	/* dma */
 	dma_addr_t dma_addr;
@@ -316,15 +329,25 @@ static inline struct dm1105dvb *frontend_to_dm1105dvb(struct dvb_frontend *fe)
 static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe);
+	u32 lnb_mask, lnb_13v, lnb_18v;
 
-		if (voltage == SEC_VOLTAGE_18) {
-			outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR));
-			outl(DM1105_LNB_18V, dm_io_mem(DM1105_GPIOVAL));
-		} else	{
-		/*LNB ON-13V by default!*/
-			outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR));
-			outl(DM1105_LNB_13V, dm_io_mem(DM1105_GPIOVAL));
-		}
+	switch (dm1105dvb->pdev->subsystem_device) {
+	case PCI_DEVICE_ID_DM05:
+		lnb_mask = DM05_LNB_MASK;
+		lnb_13v = DM05_LNB_13V;
+		lnb_18v = DM05_LNB_18V;
+		break;
+	default:
+		lnb_mask = DM1105_LNB_MASK;
+		lnb_13v = DM1105_LNB_13V;
+		lnb_18v = DM1105_LNB_18V;
+	}
+
+	outl(lnb_mask, dm_io_mem(DM1105_GPIOCTR));
+	if (voltage == SEC_VOLTAGE_18)
+		outl(lnb_18v , dm_io_mem(DM1105_GPIOVAL));
+	else
+		outl(lnb_13v, dm_io_mem(DM1105_GPIOVAL));
 
 	return 0;
 }
@@ -463,7 +486,7 @@ static irqreturn_t dm1105dvb_irq(int irq, void *dev_id)
 	case (INTSTS_TSIRQ | INTSTS_IR):
 		dm1105dvb->nextwrp = inl(dm_io_mem(DM1105_WRP)) -
 					inl(dm_io_mem(DM1105_STADR));
-		schedule_work(&dm1105dvb->work);
+		queue_work(dm1105dvb->wq, &dm1105dvb->work);
 		break;
 	case INTSTS_IR:
 		dm1105dvb->ir.ir_command = inl(dm_io_mem(DM1105_IRCODE));
@@ -599,46 +622,44 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
 	int ret;
 
 	switch (dm1105dvb->pdev->subsystem_device) {
-	case PCI_DEVICE_ID_DW2002:
+	case PCI_DEVICE_ID_DW2004:
 		dm1105dvb->fe = dvb_attach(
-			stv0299_attach, &sharp_z0194a_config,
+			cx24116_attach, &serit_sp2633_config,
 			&dm1105dvb->i2c_adap);
+		if (dm1105dvb->fe)
+			dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
 
+		break;
+	default:
+		dm1105dvb->fe = dvb_attach(
+			stv0299_attach, &sharp_z0194a_config,
+			&dm1105dvb->i2c_adap);
 		if (dm1105dvb->fe) {
 			dm1105dvb->fe->ops.set_voltage =
 							dm1105dvb_set_voltage;
 			dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60,
 					&dm1105dvb->i2c_adap, DVB_PLL_OPERA1);
+			break;
 		}
 
-		if (!dm1105dvb->fe) {
-			dm1105dvb->fe = dvb_attach(
-				stv0288_attach, &earda_config,
-				&dm1105dvb->i2c_adap);
-			if (dm1105dvb->fe) {
-				dm1105dvb->fe->ops.set_voltage =
-							dm1105dvb_set_voltage;
-				dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
-						&dm1105dvb->i2c_adap);
-			}
+		dm1105dvb->fe = dvb_attach(
+			stv0288_attach, &earda_config,
+			&dm1105dvb->i2c_adap);
+		if (dm1105dvb->fe) {
+			dm1105dvb->fe->ops.set_voltage =
+						dm1105dvb_set_voltage;
+			dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
+					&dm1105dvb->i2c_adap);
+			break;
 		}
 
-		if (!dm1105dvb->fe) {
-			dm1105dvb->fe = dvb_attach(
-				si21xx_attach, &serit_config,
-				&dm1105dvb->i2c_adap);
-			if (dm1105dvb->fe)
-				dm1105dvb->fe->ops.set_voltage =
-							dm1105dvb_set_voltage;
-		}
-		break;
-	case PCI_DEVICE_ID_DW2004:
 		dm1105dvb->fe = dvb_attach(
-			cx24116_attach, &serit_sp2633_config,
+			si21xx_attach, &serit_config,
 			&dm1105dvb->i2c_adap);
 		if (dm1105dvb->fe)
-			dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
-		break;
+			dm1105dvb->fe->ops.set_voltage =
+						dm1105dvb_set_voltage;
+
 	}
 
 	if (!dm1105dvb->fe) {
@@ -662,10 +683,17 @@ static void __devinit dm1105dvb_read_mac(struct dm1105dvb *dm1105dvb, u8 *mac)
 	static u8 command[1] = { 0x28 };
 
 	struct i2c_msg msg[] = {
-		{ .addr = IIC_24C01_addr >> 1, .flags = 0,
-				.buf = command, .len = 1 },
-		{ .addr = IIC_24C01_addr >> 1, .flags = I2C_M_RD,
-				.buf = mac, .len = 6 },
+		{
+			.addr = IIC_24C01_addr >> 1,
+			.flags = 0,
+			.buf = command,
+			.len = 1
+		}, {
+			.addr = IIC_24C01_addr >> 1,
+			.flags = I2C_M_RD,
+			.buf = mac,
+			.len = 6
+		},
 	};
 
 	dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2);
@@ -788,14 +816,22 @@ static int __devinit dm1105_probe(struct pci_dev *pdev,
 #else
 	INIT_WORK(&dm1105dvb->work, dm1105_dmx_buffer);
 #endif
+	sprintf(dm1105dvb->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
+	dm1105dvb->wq = create_singlethread_workqueue(dm1105dvb->wqn);
+	if (!dm1105dvb->wq)
+		goto err_dvb_net;
 
 	ret = request_irq(pdev->irq, dm1105dvb_irq, IRQF_SHARED,
 						DRIVER_NAME, dm1105dvb);
 	if (ret < 0)
-		goto err_free_irq;
+		goto err_workqueue;
 
 	return 0;
 
+err_workqueue:
+	destroy_workqueue(dm1105dvb->wq);
+err_dvb_net:
+	dvb_net_release(&dm1105dvb->dvbnet);
 err_disconnect_frontend:
 	dmx->disconnect_frontend(dmx);
 err_remove_mem_frontend:
@@ -812,8 +848,6 @@ err_i2c_del_adapter:
 	i2c_del_adapter(&dm1105dvb->i2c_adap);
 err_dm1105dvb_hw_exit:
 	dm1105dvb_hw_exit(dm1105dvb);
-err_free_irq:
-	free_irq(pdev->irq, dm1105dvb);
 err_pci_iounmap:
 	pci_iounmap(pdev, dm1105dvb->io_mem);
 err_pci_release_regions:
@@ -869,6 +903,11 @@ static struct pci_device_id dm1105_id_table[] __devinitdata = {
 		.device = PCI_DEVICE_ID_DM1105,
 		.subvendor = PCI_ANY_ID,
 		.subdevice = PCI_DEVICE_ID_DW2004,
+	}, {
+		.vendor = PCI_VENDOR_ID_AXESS,
+		.device = PCI_DEVICE_ID_DM05,
+		.subvendor = PCI_VENDOR_ID_AXESS,
+		.subdevice = PCI_DEVICE_ID_DM05,
 	}, {
 		/* empty */
 	},
-- 
cgit v1.2.3


From 6f3d74e1d2c5407251649488848e76a576cfc633 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sun, 14 Jun 2009 22:05:20 -0400
Subject: au8522: add support for QAM-64 modulation type

From: Frank Dischner <phaedrus961@gmail.com>

Add support for QAM64 modulation type to the au8522 demod driver.

Priority: normal

Signed-off-by: Frank Dischner <phaedrus961@gmail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
---
 linux/drivers/media/dvb/frontends/au8522_dig.c | 98 ++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 6 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/au8522_dig.c b/linux/drivers/media/dvb/frontends/au8522_dig.c
index 41aedcc99..9375905ee 100644
--- a/linux/drivers/media/dvb/frontends/au8522_dig.c
+++ b/linux/drivers/media/dvb/frontends/au8522_dig.c
@@ -367,11 +367,90 @@ static struct {
 	{ 0x8231, 0x13 },
 };
 
-/* QAM Modulation table */
+/* QAM64 Modulation table */
 static struct {
 	u16 reg;
 	u16 data;
-} QAM_mod_tab[] = {
+} QAM64_mod_tab[] = {
+	{ 0x00a3, 0x09 },
+	{ 0x00a4, 0x00 },
+	{ 0x0081, 0xc4 },
+	{ 0x00a5, 0x40 },
+	{ 0x00aa, 0x77 },
+	{ 0x00ad, 0x77 },
+	{ 0x00a6, 0x67 },
+	{ 0x0262, 0x20 },
+	{ 0x021c, 0x30 },
+	{ 0x00b8, 0x3e },
+	{ 0x00b9, 0xf0 },
+	{ 0x00ba, 0x01 },
+	{ 0x00bb, 0x18 },
+	{ 0x00bc, 0x50 },
+	{ 0x00bd, 0x00 },
+	{ 0x00be, 0xea },
+	{ 0x00bf, 0xef },
+	{ 0x00c0, 0xfc },
+	{ 0x00c1, 0xbd },
+	{ 0x00c2, 0x1f },
+	{ 0x00c3, 0xfc },
+	{ 0x00c4, 0xdd },
+	{ 0x00c5, 0xaf },
+	{ 0x00c6, 0x00 },
+	{ 0x00c7, 0x38 },
+	{ 0x00c8, 0x30 },
+	{ 0x00c9, 0x05 },
+	{ 0x00ca, 0x4a },
+	{ 0x00cb, 0xd0 },
+	{ 0x00cc, 0x01 },
+	{ 0x00cd, 0xd9 },
+	{ 0x00ce, 0x6f },
+	{ 0x00cf, 0xf9 },
+	{ 0x00d0, 0x70 },
+	{ 0x00d1, 0xdf },
+	{ 0x00d2, 0xf7 },
+	{ 0x00d3, 0xc2 },
+	{ 0x00d4, 0xdf },
+	{ 0x00d5, 0x02 },
+	{ 0x00d6, 0x9a },
+	{ 0x00d7, 0xd0 },
+	{ 0x0250, 0x0d },
+	{ 0x0251, 0xcd },
+	{ 0x0252, 0xe0 },
+	{ 0x0253, 0x05 },
+	{ 0x0254, 0xa7 },
+	{ 0x0255, 0xff },
+	{ 0x0256, 0xed },
+	{ 0x0257, 0x5b },
+	{ 0x0258, 0xae },
+	{ 0x0259, 0xe6 },
+	{ 0x025a, 0x3d },
+	{ 0x025b, 0x0f },
+	{ 0x025c, 0x0d },
+	{ 0x025d, 0xea },
+	{ 0x025e, 0xf2 },
+	{ 0x025f, 0x51 },
+	{ 0x0260, 0xf5 },
+	{ 0x0261, 0x06 },
+	{ 0x021a, 0x00 },
+	{ 0x0546, 0x40 },
+	{ 0x0210, 0xc7 },
+	{ 0x0211, 0xaa },
+	{ 0x0212, 0xab },
+	{ 0x0213, 0x02 },
+	{ 0x0502, 0x00 },
+	{ 0x0121, 0x04 },
+	{ 0x0122, 0x04 },
+	{ 0x052e, 0x10 },
+	{ 0x00a4, 0xca },
+	{ 0x00a7, 0x40 },
+	{ 0x0526, 0x01 },
+};
+
+/* QAM256 Modulation table */
+static struct {
+	u16 reg;
+	u16 data;
+} QAM256_mod_tab[] = {
 	{ 0x80a3, 0x09 },
 	{ 0x80a4, 0x00 },
 	{ 0x8081, 0xc4 },
@@ -464,12 +543,19 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 		au8522_set_if(fe, state->config->vsb_if);
 		break;
 	case QAM_64:
+		dprintk("%s() QAM 64\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(QAM64_mod_tab); i++)
+			au8522_writereg(state,
+				QAM64_mod_tab[i].reg,
+				QAM64_mod_tab[i].data);
+		au8522_set_if(fe, state->config->qam_if);
+		break;
 	case QAM_256:
-		dprintk("%s() QAM 64/256\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(QAM_mod_tab); i++)
+		dprintk("%s() QAM 256\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab); i++)
 			au8522_writereg(state,
-				QAM_mod_tab[i].reg,
-				QAM_mod_tab[i].data);
+				QAM256_mod_tab[i].reg,
+				QAM256_mod_tab[i].data);
 		au8522_set_if(fe, state->config->qam_if);
 		break;
 	default:
-- 
cgit v1.2.3


From aa387bcec63ca659d9c03f9ad7ff70299d41f527 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 16 Jun 2009 00:46:40 -0300
Subject: dvb-usb/Kconfig: DVBWorld DVB-C USB Cable card needs tda1002x
 frontend

From: Mauro Carvalho Chehab <mchehab@redhat.com>

Auto-selects tda1002x if !DVB_FE_CUSTOMISE

Priority: normal

CC: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/dvb-usb/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index 60955a70d..8a8a1bede 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -261,6 +261,7 @@ config DVB_USB_DW2102
 	select DVB_STB6000 if !DVB_FE_CUSTOMISE
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
+	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
 	  and the TeVii S650.
-- 
cgit v1.2.3


From 337800edfc26abd2a7b3a13733836f35244d8ca5 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 4 Jun 2009 14:07:16 +0000
Subject: Add missing __devexit_p()

From: Jean Delvare <khali@linux-fr.org>

Add missing __devexit_p() to several drivers. Also add a few missing
__init, __devinit and __exit markers. These errors could result in
build failures depending on the kernel configuration.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/bt8xx/bt878.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/bt8xx/bt878.c b/linux/drivers/media/dvb/bt8xx/bt878.c
index 57f0f84b6..456cd8756 100644
--- a/linux/drivers/media/dvb/bt8xx/bt878.c
+++ b/linux/drivers/media/dvb/bt8xx/bt878.c
@@ -512,12 +512,6 @@ static int __devinit bt878_probe(struct pci_dev *dev,
 	pci_set_master(dev);
 	pci_set_drvdata(dev, bt);
 
-/*        if(init_bt878(btv) < 0) {
-		bt878_remove(dev);
-		return -EIO;
-	}
-*/
-
 	if ((result = bt878_mem_alloc(bt))) {
 		printk(KERN_ERR "bt878: failed to allocate memory!\n");
 		goto fail2;
@@ -583,7 +577,7 @@ static struct pci_driver bt878_pci_driver = {
       .name	= "bt878",
       .id_table = bt878_pci_tbl,
       .probe	= bt878_probe,
-      .remove	= bt878_remove,
+      .remove	= __devexit_p(bt878_remove),
 };
 
 static int bt878_pci_driver_registered;
-- 
cgit v1.2.3


From ac8cc4d3dda761c04e7d642d0fc1273e1216f081 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 9 Jun 2009 22:31:55 +0000
Subject: af9015: fix stack corruption bug

From: Jan Nikitenko <jan.nikitenko@gmail.com>

This patch fixes stack corruption bug present in af9015_eeprom_dump():
the buffer buf is one byte smaller than required - there is 4 chars
for address prefix, 16*3 chars for dump of 16 eeprom bytes per line
and 1 byte for zero ending the string required, i.e. 53 bytes, but
only 52 are provided.
The one byte missing in stack based buffer buf causes following oops
on MIPS little endian platform, because i2c_adap pointer in
af9015_af9013_frontend_attach() is corrupted by inlined function
af9015_eeprom_dump():

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc ==
803a4488, ra == c049a1c8
Oops[#1]:
Cpu 0
$ 0   : 00000000 10003c00 00000000 803a4468
$ 4   : 8f17c600 8f067b30 00000002 00000038
$ 8   : 00000001 8faf3e98 11da000d 09010002
$12   : 00000000 00000000 00000000 0000000a
$16   : 8f17c600 8f067b68 8faf3c00 8f067c04
$20   : 8f067b9c 00000100 8f067bf0 80104100
$24   : 00000000 2aba9fb0
$28   : 8f066000 8f067af0 802cbc48 c049a1c8
Hi    : 00000000
Lo    : 00000000
epc   : 803a4488 i2c_transfer+0x20/0x104
   Not tainted
ra    : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013]
Status: 10003c03    KERNEL EXL IE
Cause : 00808008
BadVA : 00000000
PrId  : 03030200 (Au1550)
Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class
i2c_au1550 au1550_spi
Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470)
Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00
       8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7
       00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004
       00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600
       c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00
       ...
Call Trace:
[<803a4488>] i2c_transfer+0x20/0x104
[<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013]
[<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013]
[<c049c924>] af9013_attach+0x98/0x65c [af9013]
[<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015]
[<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb]
[<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb]
[<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015]
[<80381024>] usb_probe_interface+0xbc/0x218
[<803227fc>] driver_probe_device+0x12c/0x30c
[<80322a80>] __driver_attach+0xa4/0xac
[<80321ed0>] bus_for_each_dev+0x60/0xd0
[<8032162c>] bus_add_driver+0x1e8/0x2a8
[<80322cdc>] driver_register+0x7c/0x17c
[<80380d30>] usb_register_driver+0xa0/0x12c
[<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015]
[<8010d2a4>] __kprobes_text_end+0x3c/0x1f4
[<80167150>] sys_init_module+0xb8/0x1cc
[<80102370>] stack_done+0x20/0x3c


Code: afb10018  7000003f  00808021 <8c430000> 7000003f  1060002d  00c09021
8f830014  3c02efff

Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/dvb-usb/af9015.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c
index a50bf34af..b6fc8ddf3 100644
--- a/linux/drivers/media/dvb/dvb-usb/af9015.c
+++ b/linux/drivers/media/dvb/dvb-usb/af9015.c
@@ -541,7 +541,7 @@ exit:
 /* dump eeprom */
 static int af9015_eeprom_dump(struct dvb_usb_device *d)
 {
-	char buf[52], buf2[4];
+	char buf[4+3*16+1], buf2[4];
 	u8 reg, val;
 
 	for (reg = 0; ; reg++) {
-- 
cgit v1.2.3


From f4b54f7a0bb1daf912ce8e3013e34cccebba6a34 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 11 Jun 2009 12:38:54 +0000
Subject: lgs8gxx: lgs8913 fake signal strength option default on

From: David Wong <davidtlwong@gmail.com>

lgs8gxx: lgs8913 fake signal strength option default on. Original
calculation is too slow.

Signed-off-by: David T.L. Wong <davidtlwong <at> gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/frontends/lgs8gxx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/lgs8gxx.c b/linux/drivers/media/dvb/frontends/lgs8gxx.c
index 1395f3b5b..a5b7bdeff 100644
--- a/linux/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/linux/drivers/media/dvb/frontends/lgs8gxx.c
@@ -37,14 +37,14 @@
 	} while (0)
 
 static int debug;
-static int fake_signal_str;
+static int fake_signal_str = 1;
 
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 module_param(fake_signal_str, int, 0644);
 MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913."
-"Signal strength calculation is slow.(default:off).");
+"Signal strength calculation is slow.(default:on).");
 
 /* LGS8GXX internal helper functions */
 
-- 
cgit v1.2.3


From 4a2e9d7d8ff2bfc867b6ac6b4ebf2c831b1c6e0a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 11 Jun 2009 12:39:04 +0000
Subject: lgs8gxx: update signal strength scale

From: David Wong <davidtlwong@gmail.com>

lgs8gxx: update signal strength scale

Signed-off-by: David T.L. Wong <davidtlwong <at> gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/frontends/lgs8gxx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/lgs8gxx.c b/linux/drivers/media/dvb/frontends/lgs8gxx.c
index a5b7bdeff..1ce30aa53 100644
--- a/linux/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/linux/drivers/media/dvb/frontends/lgs8gxx.c
@@ -650,7 +650,7 @@ static int lgs8gxx_read_signal_agc(struct lgs8gxx_state *priv, u16 *signal)
 	else
 		cat = 0;
 
-	*signal = cat;
+	*signal = cat * 65535 / 5;
 
 	return 0;
 }
@@ -670,8 +670,8 @@ static int lgs8913_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal)
 
 	if (fake_signal_str) {
 		if ((t & 0xC0) == 0xC0) {
-			dprintk("Fake signal strength as 50\n");
-			*signal = 0x32;
+			dprintk("Fake signal strength\n");
+			*signal = 0x7FFF;
 		} else
 			*signal = 0;
 		return 0;
-- 
cgit v1.2.3


From 28f0a28c5e0c37bee44d914bde9533d5fc16b62d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 16 Jun 2009 18:37:35 -0300
Subject: Backport language typo and whitespace differences

From: Mauro Carvalho Chehab <mchehab@redhat.com>

kernel-sync:

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/dvb-usb/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index 8a8a1bede..496c1a370 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
 	help
 	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
 	  firmware protocol used by this module is similar to the one used by the
-	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
 
 config DVB_USB_DTT200U
 	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
-- 
cgit v1.2.3


From 9204bc59f7e30d4441efb2262a1debc8782b5b74 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 16 Jun 2009 19:02:10 -0300
Subject: dvb-net: backport upstream changes fb875333c8 and 0eade1f930

From: Mauro Carvalho Chehab <mchehab@redhat.com>

kernel-sync:

commit fb875333c80942455551f690f306a899ceeee5df
    Author: Stephen Hemminger <shemminger@vyatta.com>
    Date:   Wed Jan 7 18:02:53 2009 -0800

    dvb: update network device to current API

    Use internal network_device_stats that exist in network device and
    net_device_ops. Compile tested only.

commit 0eade1f930fa3ba6461b34baf3ed8fa7c4abc40f
    Author: Wang Chen <wangchen@cn.fujitsu.com>
    Date:   Wed Dec 3 21:13:13 2008 -0800

    dvb: Kill directly reference of netdev->priv

    Simply replace netdev->priv with netdev_priv().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/dvb-core/dvb_net.c | 65 +++++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-core/dvb_net.c b/linux/drivers/media/dvb/dvb-core/dvb_net.c
index 5f4856c6d..1eede48a9 100644
--- a/linux/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/linux/drivers/media/dvb/dvb-core/dvb_net.c
@@ -126,7 +126,9 @@ static void hexdump( const unsigned char *buf, unsigned short len )
 
 struct dvb_net_priv {
 	int in_use;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 	struct net_device_stats stats;
+#endif
 	u16 pid;
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
 	struct net_device *net;
@@ -391,8 +393,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				if (priv->ule_skb) {
 					dev_kfree_skb( priv->ule_skb );
 					/* Prepare for next SNDU. */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 					priv->stats.rx_errors++;
 					priv->stats.rx_frame_errors++;
+#else
+					dev->stats.rx_errors++;
+					dev->stats.rx_frame_errors++;
+#endif
 				}
 				reset_ule(priv);
 				priv->need_pusi = 1;
@@ -445,8 +452,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 					dev_kfree_skb( priv->ule_skb );
 					/* Prepare for next SNDU. */
 					// reset_ule(priv);  moved to below.
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 					priv->stats.rx_errors++;
 					priv->stats.rx_frame_errors++;
+#else
+					dev->stats.rx_errors++;
+					dev->stats.rx_frame_errors++;
+#endif
 				}
 				reset_ule(priv);
 				/* skip to next PUSI. */
@@ -467,8 +479,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 						/* Drop partly decoded SNDU, reset state, resync on PUSI. */
 						if (priv->ule_skb) {
 							dev_kfree_skb( priv->ule_skb );
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 							priv->stats.rx_errors++;
 							priv->stats.rx_frame_errors++;
+#else
+							dev->stats.rx_errors++;
+							dev->stats.rx_frame_errors++;
+#endif
 						}
 						reset_ule(priv);
 						priv->need_pusi = 1;
@@ -484,8 +501,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				if (priv->ule_sndu_remain > 183) {
 					/* Current SNDU lacks more data than there could be available in the
 					 * current TS cell. */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 					priv->stats.rx_errors++;
 					priv->stats.rx_length_errors++;
+#else
+					dev->stats.rx_errors++;
+					dev->stats.rx_length_errors++;
+#endif
 					printk(KERN_WARNING "%lu: Expected %d more SNDU bytes, but "
 					       "got PUSI (pf %d, ts_remain %d).  Flushing incomplete payload.\n",
 					       priv->ts_count, priv->ule_sndu_remain, ts[4], ts_remain);
@@ -527,8 +549,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				if (priv->ule_sndu_len < 5) {
 					printk(KERN_WARNING "%lu: Invalid ULE SNDU length %u. "
 					       "Resyncing.\n", priv->ts_count, priv->ule_sndu_len);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 					priv->stats.rx_errors++;
 					priv->stats.rx_length_errors++;
+#else
+					dev->stats.rx_errors++;
+					dev->stats.rx_length_errors++;
+#endif
 					priv->ule_sndu_len = 0;
 					priv->need_pusi = 1;
 					new_ts = 1;
@@ -580,7 +607,11 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 			if (priv->ule_skb == NULL) {
 				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
 				       dev->name);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 				priv->stats.rx_dropped++;
+#else
+				dev->stats.rx_dropped++;
+#endif
 				return;
 			}
 
@@ -653,8 +684,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				ule_dump = 1;
 #endif
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 				priv->stats.rx_errors++;
 				priv->stats.rx_crc_errors++;
+#else
+				dev->stats.rx_errors++;
+				dev->stats.rx_crc_errors++;
+#endif
 				dev_kfree_skb(priv->ule_skb);
 			} else {
 				/* CRC32 verified OK. */
@@ -764,8 +800,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 				 * receive the packet anyhow. */
 				/* if (priv->ule_dbit && skb->pkt_type == PACKET_OTHERHOST)
 					priv->ule_skb->pkt_type = PACKET_HOST; */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 				priv->stats.rx_packets++;
 				priv->stats.rx_bytes += priv->ule_skb->len;
+#else
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += priv->ule_skb->len;
+#endif
 				netif_rx(priv->ule_skb);
 			}
 			sndu_done:
@@ -820,8 +861,12 @@ static void dvb_net_sec(struct net_device *dev,
 {
 	u8 *eth;
 	struct sk_buff *skb;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 	struct net_device_stats *stats =
 		&((struct dvb_net_priv *) netdev_priv(dev))->stats;
+#else
+	struct net_device_stats *stats = &dev->stats;
+#endif
 	int snap = 0;
 
 	/* note: pkt_len includes a 32bit checksum */
@@ -1269,11 +1314,12 @@ static int dvb_net_stop(struct net_device *dev)
 	return dvb_net_feed_stop(dev);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 static struct net_device_stats * dvb_net_get_stats(struct net_device *dev)
 {
 	return &((struct dvb_net_priv *) netdev_priv(dev))->stats;
 }
-
+#endif
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
 static const struct header_ops dvb_header_ops = {
 	.create		= eth_header,
@@ -1282,6 +1328,19 @@ static const struct header_ops dvb_header_ops = {
 };
 #endif
 
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
+static const struct net_device_ops dvb_netdev_ops = {
+	.ndo_open		= dvb_net_open,
+	.ndo_stop		= dvb_net_stop,
+	.ndo_start_xmit		= dvb_net_tx,
+	.ndo_set_multicast_list = dvb_net_set_multicast_list,
+	.ndo_set_mac_address    = dvb_net_set_mac,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+#endif
+
 static void dvb_net_setup(struct net_device *dev)
 {
 	ether_setup(dev);
@@ -1291,12 +1350,16 @@ static void dvb_net_setup(struct net_device *dev)
 #else
 	dev->hard_header_cache  = NULL;
 #endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
 	dev->open		= dvb_net_open;
 	dev->stop		= dvb_net_stop;
 	dev->hard_start_xmit	= dvb_net_tx;
 	dev->get_stats		= dvb_net_get_stats;
 	dev->set_multicast_list = dvb_net_set_multicast_list;
 	dev->set_mac_address    = dvb_net_set_mac;
+#else
+	dev->netdev_ops		= &dvb_netdev_ops;
+#endif
 	dev->mtu		= 4096;
 	dev->mc_count           = 0;
 
-- 
cgit v1.2.3


From 0c34c03a8998a601da924c7f2679494992b548e6 Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Sun, 14 Jun 2009 20:10:05 +0300
Subject: Bug fix: stv0900 register read must using i2c in one transaction

From: Abylay Ospan <aospan@netup.ru>

Signed-off-by: Abylay Ospan <aospan@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv0900_core.c | 40 ++++++++++++------------
 1 file changed, 20 insertions(+), 20 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c
index 899b1e7ed..156d269f7 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_core.c
+++ b/linux/drivers/media/dvb/frontends/stv0900_core.c
@@ -149,31 +149,31 @@ void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr,
 		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
 }
 
-u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr)
+u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg)
 {
-	u8 data[2];
 	int ret;
-	struct i2c_msg i2cmsg = {
-		.addr  = i_params->i2c_addr,
-		.flags = 0,
-		.len   = 2,
-		.buf   = data,
+	u8 b0[] = { MSB(reg), LSB(reg) };
+	u8 buf = 0;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= i_params->i2c_addr,
+			.flags	= 0,
+			.buf = b0,
+			.len = 2,
+		}, {
+			.addr	= i_params->i2c_addr,
+			.flags	= I2C_M_RD,
+			.buf = &buf,
+			.len = 1,
+		},
 	};
 
-	data[0] = MSB(reg_addr);
-	data[1] = LSB(reg_addr);
-
-	ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
-
-	i2cmsg.flags = I2C_M_RD;
-	i2cmsg.len = 1;
-	ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
+	ret = i2c_transfer(i_params->i2c_adap, msg, 2);
+	if (ret != 2)
+		dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n",
+				__func__, ret, reg);
 
-	return data[0];
+	return buf;
 }
 
 void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
-- 
cgit v1.2.3


From 3d2ec84da9539d7b413eaa6c2b99373cfc02597e Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Mon, 8 Jun 2009 11:31:26 +0400
Subject: Implement reading uncorrected blocks for stv0900

From: Abylay Ospan <aospan@netup.ru>

Signed-off-by: Abylay Ospan <aospan@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv0900_core.c | 39 ++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c
index 156d269f7..2e9e5fbbb 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_core.c
+++ b/linux/drivers/media/dvb/frontends/stv0900_core.c
@@ -716,6 +716,44 @@ static s32 stv0900_carr_get_quality(struct dvb_frontend *fe,
 	return c_n;
 }
 
+static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
+{
+	struct stv0900_state *state = fe->demodulator_priv;
+	struct stv0900_internal *i_params = state->internal;
+	enum fe_stv0900_demod_num demod = state->demod;
+	u8 err_val1, err_val0;
+	s32 err_field1, err_field0;
+	u32 header_err_val = 0;
+
+	*ucblocks = 0x0;
+	if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
+		/* DVB-S2 delineator errors count */
+
+		/* retreiving number for errnous headers */
+		dmd_reg(err_field0, R0900_P1_BBFCRCKO0,
+					R0900_P2_BBFCRCKO0);
+		dmd_reg(err_field1, R0900_P1_BBFCRCKO1,
+					R0900_P2_BBFCRCKO1);
+
+		err_val1 = stv0900_read_reg(i_params, err_field1);
+		err_val0 = stv0900_read_reg(i_params, err_field0);
+		header_err_val = (err_val1<<8) | err_val0;
+
+		/* retreiving number for errnous packets */
+		dmd_reg(err_field0, R0900_P1_UPCRCKO0,
+					R0900_P2_UPCRCKO0);
+		dmd_reg(err_field1, R0900_P1_UPCRCKO1,
+					R0900_P2_UPCRCKO1);
+
+		err_val1 = stv0900_read_reg(i_params, err_field1);
+		err_val0 = stv0900_read_reg(i_params, err_field0);
+		*ucblocks = (err_val1<<8) | err_val0;
+		*ucblocks += header_err_val;
+	}
+
+	return 0;
+}
+
 static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	*snr = stv0900_carr_get_quality(fe,
@@ -1897,6 +1935,7 @@ static struct dvb_frontend_ops stv0900_ops = {
 	.read_ber			= stv0900_read_ber,
 	.read_signal_strength		= stv0900_read_signal_strength,
 	.read_snr			= stv0900_read_snr,
+	.read_ucblocks                  = stv0900_read_ucblocks,
 };
 
 struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
-- 
cgit v1.2.3


From 0047b6a8d3ad87d40efdfbd209a059e90e7f98c9 Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@netup.ru>
Date: Fri, 19 Jun 2009 12:45:23 +0400
Subject: Create table for customize stv0900 ts registers.

From: Igor M. Liplianin <liplianin@netup.ru>

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv0900.h      |  7 ++++++-
 linux/drivers/media/dvb/frontends/stv0900_core.c | 21 +++++++++++++++++++--
 linux/drivers/media/dvb/frontends/stv0900_priv.h |  2 ++
 3 files changed, 27 insertions(+), 3 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/stv0900.h b/linux/drivers/media/dvb/frontends/stv0900.h
index 8a1332c20..bf4e9b633 100644
--- a/linux/drivers/media/dvb/frontends/stv0900.h
+++ b/linux/drivers/media/dvb/frontends/stv0900.h
@@ -29,6 +29,11 @@
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 
+struct stv0900_reg {
+	u16 addr;
+	u8  val;
+};
+
 struct stv0900_config {
 	u8 demod_address;
 	u32 xtal;
@@ -38,7 +43,7 @@ struct stv0900_config {
 
 	u8 path1_mode;
 	u8 path2_mode;
-
+	struct stv0900_reg *ts_config_regs;
 	u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */
 	u8 tun2_maddress;
 	u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c
index 2e9e5fbbb..84bf35edb 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_core.c
+++ b/linux/drivers/media/dvb/frontends/stv0900_core.c
@@ -1397,7 +1397,7 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
 	struct stv0900_state *state = fe->demodulator_priv;
 	enum fe_stv0900_error error = STV0900_NO_ERROR;
 	enum fe_stv0900_error demodError = STV0900_NO_ERROR;
-	int selosci;
+	int selosci, i;
 
 	struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
 						state->config->demod_address);
@@ -1444,7 +1444,23 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
 				stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
 				stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
 
-				stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock);
+				state->internal->ts_config = p_init->ts_config;
+				if (state->internal->ts_config == NULL)
+					stv0900_set_ts_parallel_serial(state->internal,
+							p_init->path1_ts_clock,
+							p_init->path2_ts_clock);
+				else {
+					for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++)
+						stv0900_write_reg(state->internal,
+								state->internal->ts_config[i].addr,
+								state->internal->ts_config[i].val);
+
+					stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1);
+					stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0);
+					stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1);
+					stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0);
+				}
+
 				stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
 				switch (p_init->tuner1_adc) {
 				case 1:
@@ -1969,6 +1985,7 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
 		init_params.tun1_iq_inversion	= STV0900_IQ_NORMAL;
 		init_params.tuner1_adc		= config->tun1_adc;
 		init_params.path2_ts_clock	= config->path2_mode;
+		init_params.ts_config		= config->ts_config_regs;
 		init_params.tun2_maddress	= config->tun2_maddress;
 		init_params.tuner2_adc		= config->tun2_adc;
 		init_params.tun2_iq_inversion	= STV0900_IQ_SWAPPED;
diff --git a/linux/drivers/media/dvb/frontends/stv0900_priv.h b/linux/drivers/media/dvb/frontends/stv0900_priv.h
index 67dc8ec63..5ed7a145c 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/linux/drivers/media/dvb/frontends/stv0900_priv.h
@@ -271,6 +271,7 @@ struct stv0900_init_params{
 
 	/* IQ from the tuner2 to the demod */
 	enum stv0900_iq_inversion	tun2_iq_inversion;
+	struct stv0900_reg		*ts_config;
 };
 
 struct stv0900_search_params {
@@ -363,6 +364,7 @@ struct stv0900_internal{
 	u8			i2c_addr;
 	u8			clkmode;/* 0 for CLKI, 2 for XTALI */
 	u8			chip_id;
+	struct stv0900_reg	*ts_config;
 	enum fe_stv0900_error	errs;
 	int dmds_used;
 };
-- 
cgit v1.2.3


From 1d881651c4e9931b20895a9a124e06be1a15e759 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 14 Jun 2009 11:47:35 +0200
Subject: smscoreapi: fix compile warning

From: Hans Verkuil <hverkuil@xs4all.nl>

gcc 4.3.1 generates this warning:

v4l/smscoreapi.c: In function 'smscore_gpio_configure':
v4l/smscoreapi.c:1481: warning: 'GroupNum' may be used uninitialized in this function
v4l/smscoreapi.c:1480: warning: 'TranslatedPinNum' may be used uninitialized in this function

While in practice this will not happen, it is something that the compiler
can't determine. Initializing these two local variables to 0 suppresses
this warning.

Priority: normal

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
CC: Udi Atar <udi.linuxtv@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 linux/drivers/media/dvb/siano/smscoreapi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c
index e513408fc..54f59f24e 100644
--- a/linux/drivers/media/dvb/siano/smscoreapi.c
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c
@@ -1477,8 +1477,8 @@ int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
 		struct smscore_gpio_config *pGpioConfig) {
 
 	u32 totalLen;
-	u32 TranslatedPinNum;
-	u32 GroupNum;
+	u32 TranslatedPinNum = 0;
+	u32 GroupNum = 0;
 	u32 ElectricChar;
 	u32 groupCfg;
 	void *buffer;
-- 
cgit v1.2.3