From 934a0ff7b293a5df5f8f33f3361ec53dd9efeda1 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Mon, 21 Jul 2008 19:33:42 +0000
Subject: usb/anysee.c: make struct anysee_usb_mutex static

From: Adrian Bunk <bunk@kernel.org>

This patch makes the needlessly global struct anysee_usb_mutex static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 linux/drivers/media/dvb/dvb-usb/anysee.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c
index adfd4fc82..2f408d2e1 100644
--- a/linux/drivers/media/dvb/dvb-usb/anysee.c
+++ b/linux/drivers/media/dvb/dvb-usb/anysee.c
@@ -43,7 +43,7 @@ module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-struct mutex anysee_usb_mutex;
+static struct mutex anysee_usb_mutex;
 
 static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
 	u8 *rbuf, u8 rlen)
-- 
cgit v1.2.3


From b758fc01ef8bdaa9a7380ef01c1e27cf6a96e256 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Sun, 27 Jul 2008 13:04:55 +0000
Subject: remove select's of FW_LOADER

From: Adrian Bunk <bunk@kernel.org>

After commit d9b19199e4894089456aaad295023263b5225c1a
(always enable FW_LOADER unless EMBEDDED=y) we can remove
the FW_LOADER select's and corresponding dependencies
on HOTPLUG.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 linux/drivers/media/dvb/bt8xx/Kconfig     |  2 --
 linux/drivers/media/dvb/dvb-usb/Kconfig   |  2 --
 linux/drivers/media/dvb/frontends/Kconfig | 24 ++++++++----------------
 linux/drivers/media/dvb/ttpci/Kconfig     |  4 ----
 linux/drivers/media/dvb/ttusb-dec/Kconfig |  2 --
 5 files changed, 8 insertions(+), 26 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/bt8xx/Kconfig b/linux/drivers/media/dvb/bt8xx/Kconfig
index 7588db131..7e9c090fc 100644
--- a/linux/drivers/media/dvb/bt8xx/Kconfig
+++ b/linux/drivers/media/dvb/bt8xx/Kconfig
@@ -1,7 +1,6 @@
 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
 	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
-	depends on HOTPLUG	# due to FW_LOADER
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_SP887X if !DVB_FE_CUSTOMISE
 	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
@@ -10,7 +9,6 @@ config DVB_BT8XX
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
 	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index 3c663c65e..e84152b75 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,8 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
 	depends on DVB_CORE && USB && I2C && INPUT
-	depends on HOTPLUG	# due to FW_LOADER
-	select FW_LOADER
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.
diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig
index fa7f0c563..574dffe91 100644
--- a/linux/drivers/media/dvb/frontends/Kconfig
+++ b/linux/drivers/media/dvb/frontends/Kconfig
@@ -97,9 +97,8 @@ comment "DVB-T (terrestrial) frontends"
 
 config DVB_SP8870
 	tristate "Spase sp8870 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -110,9 +109,8 @@ config DVB_SP8870
 
 config DVB_SP887X
 	tristate "Spase sp887x based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -158,9 +156,8 @@ config DVB_L64781
 
 config DVB_TDA1004X
 	tristate "Philips TDA10045H/TDA10046H based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -225,9 +222,8 @@ config DVB_DIB7000P
 
 config DVB_TDA10048
 	tristate "Philips TDA10048HN based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -267,9 +263,8 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
 
 config DVB_NXT200X
 	tristate "NxtWave Communications NXT2002/NXT2004 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -282,9 +277,8 @@ config DVB_NXT200X
 
 config DVB_OR51211
 	tristate "Oren OR51211 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
@@ -295,9 +289,8 @@ config DVB_OR51211
 
 config DVB_OR51132
 	tristate "Oren OR51132 based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -311,9 +304,8 @@ config DVB_OR51132
 
 config DVB_BCM3510
 	tristate "Broadcom BCM3510"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
 	  support this frontend.
diff --git a/linux/drivers/media/dvb/ttpci/Kconfig b/linux/drivers/media/dvb/ttpci/Kconfig
index 87c973ac6..41b5a988b 100644
--- a/linux/drivers/media/dvb/ttpci/Kconfig
+++ b/linux/drivers/media/dvb/ttpci/Kconfig
@@ -5,8 +5,6 @@ config TTPCI_EEPROM
 config DVB_AV7110
 	tristate "AV7110 cards"
 	depends on DVB_CORE && PCI && I2C
-	depends on HOTPLUG
-	select FW_LOADER if !DVB_AV7110_FIRMWARE
 	select TTPCI_EEPROM
 	select VIDEO_SAA7146_VV
 	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
@@ -127,14 +125,12 @@ config DVB_BUDGET_AV
 	depends on DVB_BUDGET_CORE && I2C
 	select VIDEO_SAA7146_VV
 	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
-	depends on HOTPLUG	# dependency of FW_LOADER
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_TUA6100 if !DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
diff --git a/linux/drivers/media/dvb/ttusb-dec/Kconfig b/linux/drivers/media/dvb/ttusb-dec/Kconfig
index a23cc0aa1..d5f48a310 100644
--- a/linux/drivers/media/dvb/ttusb-dec/Kconfig
+++ b/linux/drivers/media/dvb/ttusb-dec/Kconfig
@@ -1,8 +1,6 @@
 config DVB_TTUSB_DEC
 	tristate "Technotrend/Hauppauge USB DEC devices"
 	depends on DVB_CORE && USB && INPUT
-	depends on HOTPLUG	# due to FW_LOADER
-	select FW_LOADER
 	select CRC32
 	help
 	  Support for external USB adapters designed by Technotrend and
-- 
cgit v1.2.3


From ae79da457847bbc639abf3ac9053839a1dafe67f Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Sun, 27 Jul 2008 12:36:24 -0300
Subject: backport commit 8d8bb39b9eba32dd70e87fd5ad5c5dd4ba118e06

From: Mauro Carvalho Chehab <mchehab@infradead.org>

kernel-sync:
    Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
    Date:   Fri Jul 25 19:44:49 2008 -0700

    dma-mapping: add the device argument to dma_mapping_error()

    Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
    architecture does:

    This enables us to cleanly fix the Calgary IOMMU issue that some devices
    are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

    I think that per-device dma_mapping_ops support would be also helpful for
    KVM people to support PCI passthrough but Andi thinks that this makes it
    difficult to support the PCI passthrough (see the above thread).  So I
    CC'ed this to KVM camp.  Comments are appreciated.

    A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
    pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
    NULL, the system-wide dma_ops pointer is used as before.

    If it's useful for KVM people, I plan to implement a mechanism to register
    a hook called when a new pci (or dma capable) device is created (it works
    with hot plugging).  It enables IOMMUs to set up an appropriate
    dma_mapping_ops per device.

    The major obstacle is that dma_mapping_error doesn't take a pointer to the
    device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
    device.  Note all the POWER IOMMUs use the same dma_mapping_error function
    so this is not a problem for POWER but x86 IOMMUs use different
    dma_mapping_error functions.

    The first patch adds the device argument to dma_mapping_error.  The patch
    is trivial but large since it touches lots of drivers and dma-mapping.h in
    all the architecture.

    This patch:

    dma_mapping_error() doesn't take a pointer to the device unlike other DMA
    operations.  So we can't have dma_mapping_ops per device.

    Note that POWER already has dma_mapping_ops per device but all the POWER
    IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
    argument.

    [akpm@linux-foundation.org: fix sge]
    [akpm@linux-foundation.org: fix svc_rdma]
    [akpm@linux-foundation.org: build fix]
    [akpm@linux-foundation.org: fix bnx2x]
    [akpm@linux-foundation.org: fix s2io]
    [akpm@linux-foundation.org: fix pasemi_mac]
    [akpm@linux-foundation.org: fix sdhci]
    [akpm@linux-foundation.org: build fix]
    [akpm@linux-foundation.org: fix sparc]
    [akpm@linux-foundation.org: fix ibmvscsi]

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 linux/drivers/media/dvb/pluto2/pluto2.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/pluto2/pluto2.c b/linux/drivers/media/dvb/pluto2/pluto2.c
index d654d872e..cb368e2e0 100644
--- a/linux/drivers/media/dvb/pluto2/pluto2.c
+++ b/linux/drivers/media/dvb/pluto2/pluto2.c
@@ -242,7 +242,11 @@ static int __devinit pluto_dma_map(struct pluto *pluto)
 	pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 27)
 	return pci_dma_mapping_error(pluto->dma_addr);
+#else
+	return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
+#endif
 }
 
 static void pluto_dma_unmap(struct pluto *pluto)
-- 
cgit v1.2.3


From 89fe48e70c85b3ff9795e6a5fc3b190ecb030297 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Mon, 21 Jul 2008 19:21:58 +0000
Subject: replace __FUNCTION__ with __func__

From: Alexander Beregalov <a.beregalov@gmail.com>

v4l/drx397xD: replace __FUNCTION__ with __func__

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 linux/drivers/media/dvb/frontends/drx397xD.c | 34 ++++++++++++++--------------
 linux/drivers/media/dvb/frontends/drx397xD.h |  2 +-
 2 files changed, 18 insertions(+), 18 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/drx397xD.c b/linux/drivers/media/dvb/frontends/drx397xD.c
index 52a9a6553..f1ea891d7 100644
--- a/linux/drivers/media/dvb/frontends/drx397xD.c
+++ b/linux/drivers/media/dvb/frontends/drx397xD.c
@@ -97,7 +97,7 @@ static void drx_release_fw(struct drx397xD_state *s)
 {
 	fw_ix_t ix = s->chip_rev;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	write_lock(&fw[ix].lock);
 	if (fw[ix].refcnt) {
@@ -114,7 +114,7 @@ static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix)
 	size_t size, len;
 	int i = 0, j, rc = -EINVAL;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	if (ix < 0 || ix >= ARRAY_SIZE(fw))
 		return -EINVAL;
@@ -198,10 +198,10 @@ static int write_fw(struct drx397xD_state *s, blob_ix_t ix)
 	int len, rc = 0, i = 0;
 
 	if (ix < 0 || ix >= ARRAY_SIZE(blob_name)) {
-		pr_debug("%s drx_fw_ix_t out of range\n", __FUNCTION__);
+		pr_debug("%s drx_fw_ix_t out of range\n", __func__);
 		return -EINVAL;
 	}
-	pr_debug("%s %s\n", __FUNCTION__, blob_name[ix]);
+	pr_debug("%s %s\n", __func__, blob_name[ix]);
 
 	read_lock(&fw[s->chip_rev].lock);
 	data = fw[s->chip_rev].data[ix];
@@ -306,7 +306,7 @@ static int PLL_Set(struct drx397xD_state *s,
 	u32 f_tuner, f = fep->frequency;
 	int rc;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	if ((f > s->frontend.ops.tuner_ops.info.frequency_max) ||
 	    (f < s->frontend.ops.tuner_ops.info.frequency_min))
@@ -326,7 +326,7 @@ static int PLL_Set(struct drx397xD_state *s,
 		return rc;
 
 	*df_tuner = f_tuner - f;
-	pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __FUNCTION__, f,
+	pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __func__, f,
 		 f_tuner);
 
 	return 0;
@@ -341,7 +341,7 @@ static int SC_WaitForReady(struct drx397xD_state *s)
 	int cnt = 1000;
 	int rc;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	while (cnt--) {
 		rc = RD16(s, 0x820043);
@@ -355,7 +355,7 @@ static int SC_SendCommand(struct drx397xD_state *s, int cmd)
 {
 	int rc;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	WR16(s, 0x820043, cmd);
 	SC_WaitForReady(s);
@@ -369,7 +369,7 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd)
 {
 	int rc, cnt = 1000;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	rc = WR16(s, 0x420032, cmd);
 	if (rc < 0)
@@ -390,7 +390,7 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd)
 static int HI_CfgCommand(struct drx397xD_state *s)
 {
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	WR16(s, 0x420033, 0x3973);
 	WR16(s, 0x420034, s->config.w50);	// code 4, log 4
@@ -420,7 +420,7 @@ static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc)
 	u16 w0C = agc->w0C;
 	int quot, rem, i, rc = -EINVAL;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	if (agc->w04 > 0x3ff)
 		goto exit_rc;
@@ -479,7 +479,7 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc)
 	u16 w06 = agc->w06;
 	int rc = -1;
 
-	pr_debug("%s %d 0x%x 0x%x\n", __FUNCTION__, agc->d00, w04, w06);
+	pr_debug("%s %d 0x%x 0x%x\n", __func__, agc->d00, w04, w06);
 
 	if (w04 > 0x3ff)
 		goto exit_rc;
@@ -555,7 +555,7 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s)
 	int lockstat;
 	u32 clk, clk_limit;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	if (s->config.d5C == 0) {
 		EXIT_RC(WR16(s, 0x08200e8, 0x010));
@@ -599,7 +599,7 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s)
 
 	if (clk - s->config.f_osc * 1000 + clk_limit <= 2 * clk_limit) {
 		s->f_osc = clk;
-		pr_debug("%s: osc %d %d [Hz]\n", __FUNCTION__,
+		pr_debug("%s: osc %d %d [Hz]\n", __func__,
 			 s->config.f_osc * 1000, clk - s->config.f_osc * 1000);
 	}
 	rc = WR16(s, 0x08200e8, 0);
@@ -611,7 +611,7 @@ static int ConfigureMPEGOutput(struct drx397xD_state *s, int type)
 {
 	int rc, si, bp;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	si = s->config.wA0;
 	if (s->config.w98 == 0) {
@@ -647,7 +647,7 @@ static int drx_tune(struct drx397xD_state *s,
 
 	int rc, df_tuner;
 	int a, b, c, d;
-	pr_debug("%s %d\n", __FUNCTION__, s->config.d60);
+	pr_debug("%s %d\n", __func__, s->config.d60);
 
 	if (s->config.d60 != 2)
 		goto set_tuner;
@@ -1124,7 +1124,7 @@ static int drx397x_init(struct dvb_frontend *fe)
 	struct drx397xD_state *s = fe->demodulator_priv;
 	int rc;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	s->config.rfagc.d00 = 2;	/* 0x7c */
 	s->config.rfagc.w04 = 0;
diff --git a/linux/drivers/media/dvb/frontends/drx397xD.h b/linux/drivers/media/dvb/frontends/drx397xD.h
index ddc7a0797..2ad1ea0cc 100644
--- a/linux/drivers/media/dvb/frontends/drx397xD.h
+++ b/linux/drivers/media/dvb/frontends/drx397xD.h
@@ -122,7 +122,7 @@ extern struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config
 static inline struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config,
 					   struct i2c_adapter *i2c)
 {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
 #endif /* CONFIG_DVB_DRX397XD */
-- 
cgit v1.2.3


From cfc8abd9b55723cd9479aeb09ef1762aab9fa8bc Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Sun, 27 Jul 2008 17:11:28 -0400
Subject: au8522: add mechanism to configure IF frequency for vsb and qam

From: Michael Krufky <mkrufky@linuxtv.org>

Add a mechanism to configure IF frequency for vsb and qam.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/frontends/au8522.c | 66 ++++++++++++++++++++++++++++++
 linux/drivers/media/dvb/frontends/au8522.h |  9 ++++
 2 files changed, 75 insertions(+)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/au8522.c b/linux/drivers/media/dvb/frontends/au8522.c
index 37f6260e1..d968a1000 100644
--- a/linux/drivers/media/dvb/frontends/au8522.c
+++ b/linux/drivers/media/dvb/frontends/au8522.c
@@ -304,6 +304,70 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
 	return ret;
 }
 
+/* 3.25 MHz IF Frequency table */
+static struct {
+	u16 reg;
+	u16 data;
+} if_3_25_mhz_tab[] = {
+	{ 0x80b5, 0x00 },
+	{ 0x80b6, 0x3d },
+	{ 0x80b7, 0xa0 },
+};
+
+/* 4.00 MHz IF Frequency table */
+static struct {
+	u16 reg;
+	u16 data;
+} if_4_mhz_tab[] = {
+	{ 0x80b5, 0x00 },
+	{ 0x80b6, 0x4b },
+	{ 0x80b7, 0xd9 },
+};
+
+/* 6.00 MHz IF Frequency table */
+static struct {
+	u16 reg;
+	u16 data;
+} if_6_mhz_tab[] = {
+	{ 0x80b5, 0xfb },
+	{ 0x80b6, 0x8e },
+	{ 0x80b7, 0x39 },
+};
+
+static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
+{
+	struct au8522_state *state = fe->demodulator_priv;
+	int i;
+
+	switch (if_freq) {
+	case AU8522_IF_3_25MHZ:
+		dprintk("%s() 3.25 MHz\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++)
+			au8522_writereg(state,
+					if_3_25_mhz_tab[i].reg,
+					if_3_25_mhz_tab[i].data);
+		break;
+	case AU8522_IF_4MHZ:
+		dprintk("%s() 4.00 MHz\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++)
+			au8522_writereg(state,
+					if_4_mhz_tab[i].reg,
+					if_4_mhz_tab[i].data);
+		break;
+	case AU8522_IF_6MHZ:
+		dprintk("%s() 6.00 MHz\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++)
+			au8522_writereg(state,
+					if_6_mhz_tab[i].reg,
+					if_6_mhz_tab[i].data);
+		break;
+	default:
+		dprintk("%s() IF Frequency not supported\n", __func__);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /* VSB Modulation table */
 static struct {
 	u16 reg;
@@ -438,6 +502,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				VSB_mod_tab[i].reg,
 				VSB_mod_tab[i].data);
+		au8522_set_if(fe, state->config->vsb_if);
 		break;
 	case QAM_64:
 	case QAM_256:
@@ -446,6 +511,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				QAM_mod_tab[i].reg,
 				QAM_mod_tab[i].data);
+		au8522_set_if(fe, state->config->qam_if);
 		break;
 	default:
 		dprintk("%s() Invalid modulation\n", __func__);
diff --git a/linux/drivers/media/dvb/frontends/au8522.h b/linux/drivers/media/dvb/frontends/au8522.h
index d7affa3cd..afc9af26e 100644
--- a/linux/drivers/media/dvb/frontends/au8522.h
+++ b/linux/drivers/media/dvb/frontends/au8522.h
@@ -24,6 +24,12 @@
 
 #include <linux/dvb/frontend.h>
 
+enum au8522_if_freq {
+	AU8522_IF_6MHZ = 0,
+	AU8522_IF_4MHZ,
+	AU8522_IF_3_25MHZ,
+};
+
 struct au8522_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
@@ -32,6 +38,9 @@ struct au8522_config {
 #define AU8522_TUNERLOCKING 0
 #define AU8522_DEMODLOCKING 1
 	u8 status_mode;
+
+	enum au8522_if_freq vsb_if;
+	enum au8522_if_freq qam_if;
 };
 
 #if defined(CONFIG_DVB_AU8522) || 				\
-- 
cgit v1.2.3


From 7f64ee6b1f1b9d62a97a5f605ced101aa4fe5f5b Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Mon, 28 Jul 2008 19:58:05 +0000
Subject: DVB_DRX397XD: remove FW_LOADER select

From: Adrian Bunk <bunk@kernel.org>

Also for the new DVB_DRX397XD driver the FW_LOADER select and the
corresponding dependency on HOTPLUG can be removed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 linux/drivers/media/dvb/frontends/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig
index 574dffe91..7dbb4a223 100644
--- a/linux/drivers/media/dvb/frontends/Kconfig
+++ b/linux/drivers/media/dvb/frontends/Kconfig
@@ -135,9 +135,8 @@ config DVB_CX22702
 
 config DVB_DRX397XD
 	tristate "Micronas DRX3975D/DRX3977D based"
-	depends on DVB_CORE && I2C && HOTPLUG
+	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
-	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
-- 
cgit v1.2.3


From b8e0b401a66a9c16cbf82b5b6ded4f43f3049ad5 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 30 Jul 2008 18:43:11 -0400
Subject: cxusb: fix OOPS and broken tuning regression on FusionHDTV Dual
 Digital 4

From: Robert Lowery <rglowery@exemail.com.au>

quoting Robert Lowery:

I think I've found the cause of the oops.
[...]
BTW it appears I have fixed my tuning problems with the updated patch
below.  This reverts a change Mauro made a while back.

All is good now  :)
[...]
The good news is that I've got a better patch that definitely works this
time and even better, makes use of the standard firmware (rather than
the Australian specific one).

...based on an earlier patch by Hans-Frieder Vogt:
http://www.linuxtv.org/pipermail/linux-dvb/2008-May/026280.html

Signed-off-by: Robert Lowery <rlowery@exemail.com.au>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/cxusb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c
index 578afce68..aaa0b6f0b 100644
--- a/linux/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c
@@ -565,7 +565,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
 
 static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg)
 {
-	struct dvb_usb_device *d = ptr;
+	struct dvb_usb_adapter *adap = ptr;
+	struct dvb_usb_device *d = adap->dev;
 
 	switch (command) {
 	case XC2028_TUNER_RESET:
@@ -593,9 +594,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 		.callback  = dvico_bluebird_xc2028_callback,
 	};
 	static struct xc2028_ctrl ctl = {
-		.fname       = "xc3028-dvico-au-01.fw",
+		.fname       = "xc3028-v27.fw",
 		.max_len     = 64,
-		.scode_table = XC3028_FE_ZARLINK456,
+		.demod       = XC3028_FE_ZARLINK456,
 	};
 
 	fe = dvb_attach(xc2028_attach, adap->fe, &cfg);
-- 
cgit v1.2.3


From 54bd69d6b05133720993cc78bb9817d118e4ecc2 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Fri, 1 Aug 2008 22:42:33 -0400
Subject: au8522: clean up function au8522_set_if

From: Michael Krufky <mkrufky@linuxtv.org>

re-write this function to make it simpler

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/frontends/au8522.c | 65 +++++++++---------------------
 1 file changed, 19 insertions(+), 46 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/au8522.c b/linux/drivers/media/dvb/frontends/au8522.c
index d968a1000..71ee03c26 100644
--- a/linux/drivers/media/dvb/frontends/au8522.c
+++ b/linux/drivers/media/dvb/frontends/au8522.c
@@ -304,67 +304,40 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
 	return ret;
 }
 
-/* 3.25 MHz IF Frequency table */
-static struct {
-	u16 reg;
-	u16 data;
-} if_3_25_mhz_tab[] = {
-	{ 0x80b5, 0x00 },
-	{ 0x80b6, 0x3d },
-	{ 0x80b7, 0xa0 },
-};
-
-/* 4.00 MHz IF Frequency table */
-static struct {
-	u16 reg;
-	u16 data;
-} if_4_mhz_tab[] = {
-	{ 0x80b5, 0x00 },
-	{ 0x80b6, 0x4b },
-	{ 0x80b7, 0xd9 },
-};
-
-/* 6.00 MHz IF Frequency table */
-static struct {
-	u16 reg;
-	u16 data;
-} if_6_mhz_tab[] = {
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
-};
-
 static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
 {
 	struct au8522_state *state = fe->demodulator_priv;
-	int i;
+	u8 r0b5, r0b6, r0b7;
+	char *ifmhz;
 
 	switch (if_freq) {
 	case AU8522_IF_3_25MHZ:
-		dprintk("%s() 3.25 MHz\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++)
-			au8522_writereg(state,
-					if_3_25_mhz_tab[i].reg,
-					if_3_25_mhz_tab[i].data);
+		ifmhz = "3.25";
+		r0b5 = 0x00;
+		r0b6 = 0x3d;
+		r0b7 = 0xa0;
 		break;
 	case AU8522_IF_4MHZ:
-		dprintk("%s() 4.00 MHz\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++)
-			au8522_writereg(state,
-					if_4_mhz_tab[i].reg,
-					if_4_mhz_tab[i].data);
+		ifmhz = "4.00";
+		r0b5 = 0x00;
+		r0b6 = 0x4b;
+		r0b7 = 0xd9;
 		break;
 	case AU8522_IF_6MHZ:
-		dprintk("%s() 6.00 MHz\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++)
-			au8522_writereg(state,
-					if_6_mhz_tab[i].reg,
-					if_6_mhz_tab[i].data);
+		ifmhz = "6.00";
+		r0b5 = 0xfb;
+		r0b6 = 0x8e;
+		r0b7 = 0x39;
 		break;
 	default:
 		dprintk("%s() IF Frequency not supported\n", __func__);
 		return -EINVAL;
 	}
+	dprintk("%s() %s MHz\n", __func__, ifmhz);
+	au8522_writereg(state, 0x80b5, r0b5);
+	au8522_writereg(state, 0x80b6, r0b6);
+	au8522_writereg(state, 0x80b7, r0b7);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From cbe89066e872a56e9fdf460fcf4cfc50d64369c9 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Fri, 1 Aug 2008 22:54:57 -0400
Subject: au8522: remove if frequency settings from vsb/qam modulation tables

From: Michael Krufky <mkrufky@linuxtv.org>

Since IF frequency is set after the vsb/qam modulation tables are written,
remove the redundant register settings from the vsb/qam modulation tables.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/frontends/au8522.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/au8522.c b/linux/drivers/media/dvb/frontends/au8522.c
index 71ee03c26..d946c8beb 100644
--- a/linux/drivers/media/dvb/frontends/au8522.c
+++ b/linux/drivers/media/dvb/frontends/au8522.c
@@ -371,9 +371,6 @@ static struct {
 	{ 0x80af, 0x66 },
 	{ 0x821b, 0xcc },
 	{ 0x821d, 0x80 },
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
 	{ 0x80a4, 0xe8 },
 	{ 0x8231, 0x13 },
 };
@@ -387,9 +384,6 @@ static struct {
 	{ 0x80a4, 0x00 },
 	{ 0x8081, 0xc4 },
 	{ 0x80a5, 0x40 },
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
 	{ 0x80aa, 0x77 },
 	{ 0x80ad, 0x77 },
 	{ 0x80a6, 0x67 },
-- 
cgit v1.2.3


From ac532d001dbd78c75ab437d4b1d975f11221c2b7 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 4 Aug 2008 19:32:35 +0200
Subject: v4l: fix compile errors/warnings.

From: Hans Verkuil <hverkuil@xs4all.nl>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
---
 linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 0fdcb19cb..4c233c41f 100644
--- a/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1284,11 +1284,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec)
 	u8 b1[] = { 0x61 };
 	u8 *b;
 	char idstring[21];
-#ifndef TTUSB_KERNEL
-	u8 *firmware = NULL;
-#else
 	const u8 *firmware = NULL;
-#endif
 	size_t firmware_size = 0;
 	u16 firmware_csum = 0;
 	__be16 firmware_csum_ns;
-- 
cgit v1.2.3


From f35a6467b74ef21874ce7aee3bc2728fbb22742c Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Sat, 9 Aug 2008 11:23:15 -0400
Subject: cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)

From: Anton Blanchard <anton@samba.org>

Add support for revision 2 of the DViCO FusionHDTV DVB-T Dual Digital 4
which has new tuners and demodulators (2 x DIB7070p). With this patch
both DVB reception and IR works.

The dib7000p driver currently hardwires the output mode to
OUTMODE_MPEG2_SERIAL regardless of what we ask for. Modify it to allow
OUTMODE_MPEG2_PAR_GATED_CLK to be set. Longer term we should remove the
check completely and set the output mode correctly in all the callers.

Add Kconfig bits to ensure the dib7000p and dib0070 modules are enabled.
It would be nice to only do this for the !DVB_FE_CUSTOMISE case, but
this is what the other DIB7070 module does (there are a number of
module dependencies in the attach code).

Priority: normal

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/Kconfig       |   2 +
 linux/drivers/media/dvb/dvb-usb/cxusb.c       | 206 ++++++++++++++++++++++++++
 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h |   1 +
 linux/drivers/media/dvb/frontends/dib7000p.c  |   3 +-
 4 files changed, 211 insertions(+), 1 deletion(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index e84152b75..df9932368 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -108,6 +108,8 @@ config DVB_USB_CXUSB
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	select DVB_DIB7000P
+	select DVB_TUNER_DIB0070
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c
index aaa0b6f0b..67a3bd350 100644
--- a/linux/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c
@@ -36,6 +36,8 @@
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
 #include "mxl5005s.h"
+#include "dib7000p.h"
+#include "dib0070.h"
 
 /* debug */
 static int dvb_usb_cxusb_debug;
@@ -726,6 +728,157 @@ no_IR:
 	return 0;
 }
 
+static struct dibx000_agc_config dib7070_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+
+	/*
+	 * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0
+	 */
+	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |
+		 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+	.inv_gain = 600,
+	.time_stabiliz = 10,
+	.alpha_level = 0,
+	.thlock = 118,
+	.wbd_inv = 0,
+	.wbd_ref = 3530,
+	.wbd_sel = 1,
+	.wbd_alpha = 5,
+	.agc1_max = 65535,
+	.agc1_min = 0,
+	.agc2_max = 65535,
+	.agc2_min = 0,
+	.agc1_pt1 = 0,
+	.agc1_pt2 = 40,
+	.agc1_pt3 = 183,
+	.agc1_slope1 = 206,
+	.agc1_slope2 = 255,
+	.agc2_pt1 = 72,
+	.agc2_pt2 = 152,
+	.agc2_slope1 = 88,
+	.agc2_slope2 = 90,
+	.alpha_mant = 17,
+	.alpha_exp = 27,
+	.beta_mant = 23,
+	.beta_exp = 51,
+	.perform_agc_softsplit = 0,
+};
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+	.internal = 60000,
+	.sampling = 15000,
+	.pll_prediv = 1,
+	.pll_ratio = 20,
+	.pll_range = 3,
+	.pll_reset = 1,
+	.pll_bypass = 0,
+	.enable_refdiv = 0,
+	.bypclk_div = 0,
+	.IO_CLK_en_core = 1,
+	.ADClkSrc = 1,
+	.modulo = 2,
+	/* refsel, sel, freq_15k */
+	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+	.ifreq = (0 << 25) | 0,
+	.timf = 20452225,
+	.xtal_hz = 12000000,
+};
+
+static struct dib7000p_config cxusb_dualdig4_rev2_config = {
+	.output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = 0xfcef,
+	.gpio_val = 0x0110,
+
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+};
+
+static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
+		err("set interface failed");
+
+	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
+
+	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
+
+	dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				 &cxusb_dualdig4_rev2_config);
+
+	if ((adap->fe = dvb_attach(dib7000p_attach,
+				   &adap->dev->i2c_adap, 0x80,
+				   &cxusb_dualdig4_rev2_config)) == NULL)
+		return -EIO;
+
+	return 0;
+}
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib7000p_set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return 0;
+}
+
+static struct dib0070_config dib7070p_dib0070_config = {
+	.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	.reset = dib7070_tuner_reset,
+	.sleep = dib7070_tuner_sleep,
+	.clock_khz = 12000,
+};
+
+struct dib0700_adapter_state {
+	int (*set_param_save) (struct dvb_frontend *,
+			       struct dvb_frontend_parameters *);
+};
+
+static int dib7070_set_param_override(struct dvb_frontend *fe,
+				      struct dvb_frontend_parameters *fep)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset;
+	u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	switch (band) {
+		case BAND_VHF: offset = 950; break;
+		case BAND_UHF:
+		default: offset = 550; break;
+	}
+
+	dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+
+	return state->set_param_save(fe, fep);
+}
+
+static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+	    &dib7070p_dib0070_config) == NULL)
+		return -ENODEV;
+
+	st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+	return 0;
+}
+
 static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
@@ -826,6 +979,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
+static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
 static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
@@ -852,6 +1006,9 @@ static int cxusb_probe(struct usb_interface *intf,
 				     THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
 				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf,
+				     &cxusb_bluebird_dualdig4_rev2_properties,
+				     THIS_MODULE, NULL, adapter_nr) ||
 	    0)
 		return 0;
 
@@ -876,6 +1033,7 @@ static struct usb_device_id cxusb_table [] = {
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
 	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1321,6 +1479,54 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties = {
 	}
 };
 
+static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = CYPRESS_FX2,
+
+	.size_of_priv     = sizeof(struct cxusb_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_dualdig4_rev2_frontend_attach,
+			.tuner_attach     = cxusb_dualdig4_rev2_tuner_attach,
+			.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		},
+	},
+
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
+
+	.i2c_algo         = &cxusb_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.rc_interval      = 100,
+	.rc_key_map       = dvico_mce_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(dvico_mce_rc_keys),
+	.rc_query         = cxusb_rc_query,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)",
+			{ NULL },
+			{ &cxusb_table[17], NULL },
+		},
+	}
+};
+
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 029b437ca..9b12261e0 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -170,6 +170,7 @@
 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD		0xdb58
 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM		0xdb59
 #define USB_PID_DVICO_BLUEBIRD_DUAL_4			0xdb78
+#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2		0xdb98
 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2		0xdb70
 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM	0xdb71
 #define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD		0xdb54
diff --git a/linux/drivers/media/dvb/frontends/dib7000p.c b/linux/drivers/media/dvb/frontends/dib7000p.c
index c74d373b6..ebb7594e3 100644
--- a/linux/drivers/media/dvb/frontends/dib7000p.c
+++ b/linux/drivers/media/dvb/frontends/dib7000p.c
@@ -1359,7 +1359,8 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
 	/* Ensure the output mode remains at the previous default if it's
 	 * not specifically set by the caller.
 	 */
-	if (st->cfg.output_mode != OUTMODE_MPEG2_SERIAL)
+	if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) &&
+	    (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
 		st->cfg.output_mode = OUTMODE_MPEG2_FIFO;
 
 	demod                   = &st->demod;
-- 
cgit v1.2.3


From 13b2927b565ccf92dbe49b663b758d2bfc866536 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Sat, 9 Aug 2008 12:06:26 -0400
Subject: cxusb: fix checkpatch warnings & errors

From: Michael Krufky <mkrufky@linuxtv.org>

Fix the following checkpatch.pl errors and warnings:

ERROR: do not use assignment in if condition
117: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:819:
+	if ((adap->fe = dvb_attach(dib7000p_attach,

ERROR: switch and case should be at the same indent
155: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:857:
+	switch (band) {
+		case BAND_VHF: offset = 950; break;
+		case BAND_UHF:
+		default: offset = 550; break;

WARNING: line over 80 characters
169: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:871:
+	struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);

WARNING: line over 80 characters
213: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:1342:
+static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {

WARNING: line over 80 characters
226: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:1355:
+			.size_of_priv     = sizeof(struct dib0700_adapter_state),

total: 2 errors, 3 warnings, 266 lines checked

Priority: normal

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: Anton Blanchard <anton@samba.org>
---
 linux/drivers/media/dvb/dvb-usb/cxusb.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c
index 67a3bd350..ae560b8c7 100644
--- a/linux/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c
@@ -816,9 +816,9 @@ static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap)
 	dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
 				 &cxusb_dualdig4_rev2_config);
 
-	if ((adap->fe = dvb_attach(dib7000p_attach,
-				   &adap->dev->i2c_adap, 0x80,
-				   &cxusb_dualdig4_rev2_config)) == NULL)
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+			      &cxusb_dualdig4_rev2_config);
+	if (adap->fe == NULL)
 		return -EIO;
 
 	return 0;
@@ -855,9 +855,9 @@ static int dib7070_set_param_override(struct dvb_frontend *fe,
 	u16 offset;
 	u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
 	switch (band) {
-		case BAND_VHF: offset = 950; break;
-		case BAND_UHF:
-		default: offset = 550; break;
+	case BAND_VHF: offset = 950; break;
+	default:
+	case BAND_UHF: offset = 550; break;
 	}
 
 	dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
@@ -868,7 +868,9 @@ static int dib7070_set_param_override(struct dvb_frontend *fe,
 static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_adapter_state *st = adap->priv;
-	struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	struct i2c_adapter *tun_i2c =
+		dib7000p_get_i2c_master(adap->fe,
+					DIBX000_I2C_INTERFACE_TUNER, 1);
 
 	if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
 	    &dib7070p_dib0070_config) == NULL)
@@ -1479,7 +1481,8 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties = {
 	}
 };
 
-static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
+static
+struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 
 	.usb_ctrl         = CYPRESS_FX2,
@@ -1489,10 +1492,10 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties
 	.num_adapters = 1,
 	.adapter = {
 		{
-			.streaming_ctrl   = cxusb_streaming_ctrl,
-			.frontend_attach  = cxusb_dualdig4_rev2_frontend_attach,
-			.tuner_attach     = cxusb_dualdig4_rev2_tuner_attach,
-			.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			.streaming_ctrl  = cxusb_streaming_ctrl,
+			.frontend_attach = cxusb_dualdig4_rev2_frontend_attach,
+			.tuner_attach    = cxusb_dualdig4_rev2_tuner_attach,
+			.size_of_priv    = sizeof(struct dib0700_adapter_state),
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-- 
cgit v1.2.3


From aa2741ad0e0d705cb706d4476091e047818f7020 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Sat, 9 Aug 2008 13:21:58 -0400
Subject: fix DVB_FE_CUSTOMISE for DVB_DIB7000P and DVB_TUNER_DIB0070 with
 dvb-usb-cxusb

From: Michael Krufky <mkrufky@linuxtv.org>

Allow dvb-usb-cxusb to be built without dib7000p or dib0070 selected

Priority: normal

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/Kconfig      |  4 +--
 linux/drivers/media/dvb/frontends/dib0070.h  |  8 +++++-
 linux/drivers/media/dvb/frontends/dib7000p.h | 41 ++++++++++++++++++++++++----
 3 files changed, 45 insertions(+), 8 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig
index df9932368..8a54cb483 100644
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig
@@ -108,8 +108,8 @@ config DVB_USB_CXUSB
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
-	select DVB_DIB7000P
-	select DVB_TUNER_DIB0070
+	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
diff --git a/linux/drivers/media/dvb/frontends/dib0070.h b/linux/drivers/media/dvb/frontends/dib0070.h
index 3eedfdf50..21f2c5161 100644
--- a/linux/drivers/media/dvb/frontends/dib0070.h
+++ b/linux/drivers/media/dvb/frontends/dib0070.h
@@ -41,6 +41,7 @@ struct dib0070_config {
 extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
 					   struct i2c_adapter *i2c,
 					   struct dib0070_config *cfg);
+extern u16 dib0070_wbd_offset(struct dvb_frontend *);
 #else
 static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
 						  struct i2c_adapter *i2c,
@@ -49,9 +50,14 @@ static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
+
+static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
 #endif
 
 extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
-extern u16 dib0070_wbd_offset(struct dvb_frontend *);
 
 #endif
diff --git a/linux/drivers/media/dvb/frontends/dib7000p.h b/linux/drivers/media/dvb/frontends/dib7000p.h
index 07c4d12ed..3e8126857 100644
--- a/linux/drivers/media/dvb/frontends/dib7000p.h
+++ b/linux/drivers/media/dvb/frontends/dib7000p.h
@@ -41,6 +41,14 @@ struct dib7000p_config {
 extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
 					    u8 i2c_addr,
 					    struct dib7000p_config *cfg);
+extern struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *,
+						   enum dibx000_i2c_interface,
+						   int);
+extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c,
+				    int no_of_demods, u8 default_addr,
+				    struct dib7000p_config cfg[]);
+extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
+extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value);
 #else
 static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
 						   u8 i2c_addr,
@@ -49,13 +57,36 @@ static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif
 
-extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
+static inline
+struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *fe,
+					    enum dibx000_i2c_interface i, int x)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c,
+				    int no_of_demods, u8 default_addr,
+				    struct dib7000p_config cfg[])
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+extern int dib7000p_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+extern int dib7000p_set_wbd_ref(struct dvb_frontend *fe, u16 value)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+#endif
 
-extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
 extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
-extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
-extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value);
 
 #endif
-- 
cgit v1.2.3


From a09ed3d987422da2f6d14fc6e7efa295c1312629 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Sat, 9 Aug 2008 12:36:51 -0400
Subject: cxusb: add lgs8gl5 and support for Magic-Pro DMB-TH usb stick

From: Timothy Lee <timothy.lee@siriushk.com>

Add support for Magic-Pro DMB-TH usb stick.  DMB-TH is the HDTV broadcast
standard used in Hong Kong and China.
[...]
I've also attached a second patch against the dvb-apps repository which
adds a DMB-TH scan file for Hong Kong.

Since the ProHDTV stick contains a DMB-TH decoder (lgs8gl5) onboard,
it outputs MPEG-TS to the PC.

Priority: normal

Signed-off-by: Timothy Lee <timothy.lee@siriushk.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/dvb-usb/cxusb.c       | 286 +++++++++++++++
 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h |   2 +
 linux/drivers/media/dvb/frontends/Kconfig     |   7 +
 linux/drivers/media/dvb/frontends/Makefile    |   1 +
 linux/drivers/media/dvb/frontends/lgs8gl5.c   | 480 ++++++++++++++++++++++++++
 linux/drivers/media/dvb/frontends/lgs8gl5.h   |  45 +++
 6 files changed, 821 insertions(+)
 create mode 100644 linux/drivers/media/dvb/frontends/lgs8gl5.c
 create mode 100644 linux/drivers/media/dvb/frontends/lgs8gl5.h

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c
index ae560b8c7..49985f992 100644
--- a/linux/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c
@@ -38,6 +38,7 @@
 #include "mxl5005s.h"
 #include "dib7000p.h"
 #include "dib0070.h"
+#include "lgs8gl5.h"
 
 /* debug */
 static int dvb_usb_cxusb_debug;
@@ -111,6 +112,25 @@ static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff)
 	cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40);
 }
 
+static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d,
+		u8 addr, int onoff)
+{
+	u8  o[2] = {addr, onoff};
+	u8  i;
+	int rc;
+
+	rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
+
+	if (rc < 0)
+		return rc;
+	if (i == 0x01)
+		return 0;
+	else {
+		deb_info("gpio_write failed.\n");
+		return -EIO;
+	}
+}
+
 /* I2C */
 static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			  int num)
@@ -264,6 +284,20 @@ static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff)
 	return rc;
 }
 
+static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+	u8  b;
+	ret = cxusb_power_ctrl(d, onoff);
+	if (!onoff)
+		return ret;
+
+	msleep(128);
+	cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1);
+	msleep(100);
+	return ret;
+}
+
 static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
 	u8 buf[2] = { 0x03, 0x00 };
@@ -285,6 +319,67 @@ static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return 0;
 }
 
+static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d)
+{
+	int       ep = d->props.generic_bulk_ctrl_endpoint;
+	const int timeout = 100;
+	const int junk_len = 32;
+	u8        *junk;
+	int       rd_count;
+
+	/* Discard remaining data in video pipe */
+	junk = kmalloc(junk_len, GFP_KERNEL);
+	if (!junk)
+		return;
+	while (1) {
+		if (usb_bulk_msg(d->udev,
+			usb_rcvbulkpipe(d->udev, ep),
+			junk, junk_len, &rd_count, timeout) < 0)
+			break;
+		if (!rd_count)
+			break;
+	}
+	kfree(junk);
+}
+
+static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d)
+{
+	struct usb_data_stream_properties *p = &d->props.adapter[0].stream;
+	const int timeout = 100;
+	const int junk_len = p->u.bulk.buffersize;
+	u8        *junk;
+	int       rd_count;
+
+	/* Discard remaining data in video pipe */
+	junk = kmalloc(junk_len, GFP_KERNEL);
+	if (!junk)
+		return;
+	while (1) {
+		if (usb_bulk_msg(d->udev,
+			usb_rcvbulkpipe(d->udev, p->endpoint),
+			junk, junk_len, &rd_count, timeout) < 0)
+			break;
+		if (!rd_count)
+			break;
+	}
+	kfree(junk);
+}
+
+static int cxusb_d680_dmb_streaming_ctrl(
+		struct dvb_usb_adapter *adap, int onoff)
+{
+	if (onoff) {
+		u8 buf[2] = { 0x03, 0x00 };
+		cxusb_d680_dmb_drain_video(adap->dev);
+		return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON,
+			buf, sizeof(buf), NULL, 0);
+	} else {
+		int ret = cxusb_ctrl_msg(adap->dev,
+			CMD_STREAMING_OFF, NULL, 0, NULL, 0);
+		return ret;
+	}
+}
+
 static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
@@ -337,6 +432,32 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 	return 0;
 }
 
+static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
+		int *state)
+{
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	u8 ircode[2];
+	int i;
+
+	*event = 0;
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0)
+		return 0;
+
+	for (i = 0; i < d->props.rc_key_map_size; i++) {
+		if (keymap[i].custom == ircode[0] &&
+		    keymap[i].data == ircode[1]) {
+			*event = keymap[i].event;
+			*state = REMOTE_KEY_PRESSED;
+
+			return 0;
+		}
+	}
+
+	return 0;
+}
+
 static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
 	{ 0xfe, 0x02, KEY_TV },
 	{ 0xfe, 0x0e, KEY_MP3 },
@@ -424,6 +545,44 @@ static struct dvb_usb_rc_key dvico_portable_rc_keys[] = {
 	{ 0xfc, 0x00, KEY_UNKNOWN },    /* HD */
 };
 
+static struct dvb_usb_rc_key d680_dmb_rc_keys[] = {
+	{ 0x00, 0x38, KEY_UNKNOWN },	/* TV/AV */
+	{ 0x08, 0x0c, KEY_ZOOM },
+	{ 0x08, 0x00, KEY_0 },
+	{ 0x00, 0x01, KEY_1 },
+	{ 0x08, 0x02, KEY_2 },
+	{ 0x00, 0x03, KEY_3 },
+	{ 0x08, 0x04, KEY_4 },
+	{ 0x00, 0x05, KEY_5 },
+	{ 0x08, 0x06, KEY_6 },
+	{ 0x00, 0x07, KEY_7 },
+	{ 0x08, 0x08, KEY_8 },
+	{ 0x00, 0x09, KEY_9 },
+	{ 0x00, 0x0a, KEY_MUTE },
+	{ 0x08, 0x29, KEY_BACK },
+	{ 0x00, 0x12, KEY_CHANNELUP },
+	{ 0x08, 0x13, KEY_CHANNELDOWN },
+	{ 0x00, 0x2b, KEY_VOLUMEUP },
+	{ 0x08, 0x2c, KEY_VOLUMEDOWN },
+	{ 0x00, 0x20, KEY_UP },
+	{ 0x08, 0x21, KEY_DOWN },
+	{ 0x00, 0x11, KEY_LEFT },
+	{ 0x08, 0x10, KEY_RIGHT },
+	{ 0x00, 0x0d, KEY_OK },
+	{ 0x08, 0x1f, KEY_RECORD },
+	{ 0x00, 0x17, KEY_PLAYPAUSE },
+	{ 0x08, 0x16, KEY_PLAYPAUSE },
+	{ 0x00, 0x0b, KEY_STOP },
+	{ 0x08, 0x27, KEY_FASTFORWARD },
+	{ 0x00, 0x26, KEY_REWIND },
+	{ 0x08, 0x1e, KEY_UNKNOWN },    /* Time Shift */
+	{ 0x00, 0x0e, KEY_UNKNOWN },    /* Snapshot */
+	{ 0x08, 0x2d, KEY_UNKNOWN },    /* Mouse Cursor */
+	{ 0x00, 0x0f, KEY_UNKNOWN },    /* Minimize/Maximize */
+	{ 0x08, 0x14, KEY_UNKNOWN },    /* Shuffle */
+	{ 0x00, 0x25, KEY_POWER },
+};
+
 static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 {
 	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
@@ -529,6 +688,24 @@ static struct mxl5005s_config aver_a868r_tuner = {
 	.AgcMasterByte   = 0x00,
 };
 
+/* FIXME: needs tweaking */
+static struct mxl5005s_config d680_dmb_tuner = {
+	.i2c_address     = 0x63,
+	.if_freq         = 36125000UL,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
 /* Callbacks for DVB USB */
 static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 {
@@ -617,6 +794,14 @@ static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_frontend *fe;
+	fe = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap, &d680_dmb_tuner);
+	return (fe == NULL) ? -EIO : 0;
+}
+
 static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	u8 b;
@@ -906,6 +1091,54 @@ static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap)
 	return -EIO;
 }
 
+static struct lgs8gl5_config lgs8gl5_cfg = {
+	.demod_address = 0x19,
+};
+
+static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap->dev;
+	int n;
+
+	/* Select required USB configuration */
+	if (usb_set_interface(d->udev, 0, 0) < 0)
+		err("set interface failed");
+
+	/* Unblock all USB pipes */
+	usb_clear_halt(d->udev,
+		usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+	usb_clear_halt(d->udev,
+		usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+	usb_clear_halt(d->udev,
+		usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
+
+	/* Drain USB pipes to avoid hang after reboot */
+	for (n = 0;  n < 5;  n++) {
+		cxusb_d680_dmb_drain_message(d);
+		cxusb_d680_dmb_drain_video(d);
+		msleep(200);
+	}
+
+	/* Reset the tuner */
+	if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
+		err("clear tuner gpio failed");
+		return -EIO;
+	}
+	msleep(100);
+	if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
+		err("set tuner gpio failed");
+		return -EIO;
+	}
+	msleep(100);
+
+	/* Attach frontend */
+	adap->fe = dvb_attach(lgs8gl5_attach, &lgs8gl5_cfg, &d->i2c_adap);
+	if (adap->fe == NULL)
+		return -EIO;
+
+	return 0;
+}
+
 /*
  * DViCO has shipped two devices with the same USB ID, but only one of them
  * needs a firmware download.  Check the device class details to see if they
@@ -985,6 +1218,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
 static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
+static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
 
 static int cxusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
@@ -1011,6 +1245,8 @@ static int cxusb_probe(struct usb_interface *intf,
 	    0 == dvb_usb_device_init(intf,
 				     &cxusb_bluebird_dualdig4_rev2_properties,
 				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
+				     THIS_MODULE, NULL, adapter_nr) ||
 	    0)
 		return 0;
 
@@ -1036,6 +1272,7 @@ static struct usb_device_id cxusb_table [] = {
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
 	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
+	{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1530,6 +1767,55 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
 	}
 };
 
+static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = CYPRESS_FX2,
+
+	.size_of_priv     = sizeof(struct cxusb_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = cxusb_d680_dmb_streaming_ctrl,
+			.frontend_attach  = cxusb_d680_dmb_frontend_attach,
+			.tuner_attach     = cxusb_d680_dmb_tuner_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
+		},
+	},
+
+	.power_ctrl       = cxusb_d680_dmb_power_ctrl,
+
+	.i2c_algo         = &cxusb_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.rc_interval      = 100,
+	.rc_key_map       = d680_dmb_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(d680_dmb_rc_keys),
+	.rc_query         = cxusb_d680_dmb_rc_query,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			"Conexant DMB-TH Stick",
+			{ NULL },
+			{ &cxusb_table[18], NULL },
+		},
+	}
+};
+
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 9b12261e0..851070b86 100644
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -22,6 +22,7 @@
 #define USB_VID_AVERMEDIA			0x07ca
 #define USB_VID_COMPRO				0x185b
 #define USB_VID_COMPRO_UNK			0x145f
+#define USB_VID_CONEXANT			0x0572
 #define USB_VID_CYPRESS				0x04b4
 #define USB_VID_DIBCOM				0x10b8
 #define USB_VID_DPOSH				0x1498
@@ -69,6 +70,7 @@
 #define USB_PID_COMPRO_DVBU2000_UNK_WARM		0x010d
 #define USB_PID_COMPRO_VIDEOMATE_U500			0x1e78
 #define USB_PID_COMPRO_VIDEOMATE_U500_PC		0x1e80
+#define USB_PID_CONEXANT_D680_DMB			0x86d6
 #define USB_PID_DIBCOM_HOOK_DEFAULT			0x0064
 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM		0x0065
 #define USB_PID_DIBCOM_MOD3000_COLD			0x0bb8
diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig
index 7dbb4a223..774f5c2a7 100644
--- a/linux/drivers/media/dvb/frontends/Kconfig
+++ b/linux/drivers/media/dvb/frontends/Kconfig
@@ -385,4 +385,11 @@ config DVB_ISL6421
 	help
 	  An SEC control chip.
 
+config DVB_LGS8GL5
+	tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DMB-TH tuner module. Say Y when you want to support this frontend.
+
 endmenu
diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile
index 028da5561..262eaa429 100644
--- a/linux/drivers/media/dvb/frontends/Makefile
+++ b/linux/drivers/media/dvb/frontends/Makefile
@@ -48,3 +48,4 @@ obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o
 obj-$(CONFIG_DVB_AU8522) += au8522.o
 obj-$(CONFIG_DVB_TDA10048) += tda10048.o
 obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
+obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
diff --git a/linux/drivers/media/dvb/frontends/lgs8gl5.c b/linux/drivers/media/dvb/frontends/lgs8gl5.c
new file mode 100644
index 000000000..c0a223d28
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/lgs8gl5.c
@@ -0,0 +1,480 @@
+/*
+    Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver
+
+    Copyright (C) 2008 Sirius International (Hong Kong) Limited
+	Timothy Lee <timothy.lee@siriushk.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include "dvb_frontend.h"
+#include "lgs8gl5.h"
+
+
+#define REG_RESET		0x02
+#define REG_RESET_OFF			0x01
+#define REG_03			0x03
+#define REG_04			0x04
+#define REG_07			0x07
+#define REG_09			0x09
+#define REG_0A			0x0a
+#define REG_0B			0x0b
+#define REG_0C			0x0c
+#define REG_37			0x37
+#define REG_STRENGTH		0x4b
+#define REG_STRENGTH_MASK		0x7f
+#define REG_STRENGTH_CARRIER		0x80
+#define REG_INVERSION		0x7c
+#define REG_INVERSION_ON		0x80
+#define REG_7D			0x7d
+#define REG_7E			0x7e
+#define REG_A2			0xa2
+#define REG_STATUS		0xa4
+#define REG_STATUS_SYNC		0x04
+#define REG_STATUS_LOCK		0x01
+
+
+struct lgs8gl5_state {
+	struct i2c_adapter *i2c;
+	const struct lgs8gl5_config *config;
+	struct dvb_frontend frontend;
+};
+
+
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) \
+			printk(KERN_DEBUG "lgs8gl5: " args); \
+	} while (0)
+
+
+/* Writes into demod's register */
+static int
+lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
+{
+	int ret;
+	u8 buf[] = {reg, data};
+	struct i2c_msg msg = {
+		.addr  = state->config->demod_address,
+		.flags = 0,
+		.buf   = buf,
+		.len   = 2
+	};
+
+	ret = i2c_transfer(state->i2c, &msg, 1);
+	if (ret != 1)
+		dprintk("%s: error (reg=0x%02x, val=0x%02x, ret=%i)\n",
+			__func__, reg, data, ret);
+	return (ret != 1) ? -1 : 0;
+}
+
+
+/* Reads from demod's register */
+static int
+lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg)
+{
+	int ret, j;
+	u8 b0[] = {reg};
+	u8 b1[] = {0};
+	struct i2c_msg msg[2] = {
+		{
+			.addr  = state->config->demod_address,
+			.flags = 0,
+			.buf   = b0,
+			.len   = 1
+		},
+		{
+			.addr  = state->config->demod_address,
+			.flags = I2C_M_RD,
+			.buf   = b1,
+			.len   = 1
+		}
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+	if (ret != 2)
+		return -EIO;
+
+	return b1[0];
+}
+
+
+static int
+lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
+{
+	lgs8gl5_read_reg(state, reg);
+	lgs8gl5_write_reg(state, reg, data);
+	return 0;
+}
+
+
+/* Writes into alternate device's register */
+/* TODO:  Find out what that device is for! */
+static int
+lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
+{
+	int ret, j;
+	u8 b0[] = {reg};
+	u8 b1[] = {0};
+	u8 b2[] = {reg, data};
+	struct i2c_msg msg[3] = {
+		{
+			.addr  = state->config->demod_address + 2,
+			.flags = 0,
+			.buf   = b0,
+			.len   = 1
+		},
+		{
+			.addr  = state->config->demod_address + 2,
+			.flags = I2C_M_RD,
+			.buf   = b1,
+			.len   = 1
+		},
+		{
+			.addr  = state->config->demod_address + 2,
+			.flags = 0,
+			.buf   = b2,
+			.len   = 2
+		},
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 3);
+	return (ret != 3) ? -1 : 0;
+}
+
+
+static void
+lgs8gl5_soft_reset(struct lgs8gl5_state *state)
+{
+	u8 val;
+
+	dprintk("%s\n", __func__);
+
+	val = lgs8gl5_read_reg(state, REG_RESET);
+	lgs8gl5_write_reg(state, REG_RESET, val & ~REG_RESET_OFF);
+	lgs8gl5_write_reg(state, REG_RESET, val | REG_RESET_OFF);
+	msleep(5);
+}
+
+
+static int
+lgs8gl5_set_inversion(struct lgs8gl5_state *state, int inversion)
+{
+	u8 val;
+
+	dprintk("%s\n", __func__);
+
+	switch (inversion) {
+	case INVERSION_AUTO:
+		return -EOPNOTSUPP;
+	case INVERSION_ON:
+		val = lgs8gl5_read_reg(state, REG_INVERSION);
+		return lgs8gl5_write_reg(state, REG_INVERSION,
+			val | REG_INVERSION_ON);
+	case INVERSION_OFF:
+		val = lgs8gl5_read_reg(state, REG_INVERSION);
+		return lgs8gl5_write_reg(state, REG_INVERSION,
+			val & ~REG_INVERSION_ON);
+	default:
+		return -EINVAL;
+	}
+}
+
+
+/* Starts demodulation */
+static void
+lgs8gl5_start_demod(struct lgs8gl5_state *state)
+{
+	u8  val;
+	int n;
+
+	dprintk("%s\n", __func__);
+
+	lgs8gl5_update_alt_reg(state, 0xc2, 0x28);
+	lgs8gl5_soft_reset(state);
+	lgs8gl5_update_reg(state, REG_07, 0x10);
+	lgs8gl5_update_reg(state, REG_07, 0x10);
+	lgs8gl5_write_reg(state, REG_09, 0x0e);
+	lgs8gl5_write_reg(state, REG_0A, 0xe5);
+	lgs8gl5_write_reg(state, REG_0B, 0x35);
+	lgs8gl5_write_reg(state, REG_0C, 0x30);
+
+	lgs8gl5_update_reg(state, REG_03, 0x00);
+	lgs8gl5_update_reg(state, REG_7E, 0x01);
+	lgs8gl5_update_alt_reg(state, 0xc5, 0x00);
+	lgs8gl5_update_reg(state, REG_04, 0x02);
+	lgs8gl5_update_reg(state, REG_37, 0x01);
+	lgs8gl5_soft_reset(state);
+
+	/* Wait for carrier */
+	for (n = 0;  n < 10;  n++) {
+		val = lgs8gl5_read_reg(state, REG_STRENGTH);
+		dprintk("Wait for carrier[%d] 0x%02X\n", n, val);
+		if (val & REG_STRENGTH_CARRIER)
+			break;
+		msleep(4);
+	}
+	if (!(val & REG_STRENGTH_CARRIER))
+		return;
+
+	/* Wait for lock */
+	for (n = 0;  n < 20;  n++) {
+		val = lgs8gl5_read_reg(state, REG_STATUS);
+		dprintk("Wait for lock[%d] 0x%02X\n", n, val);
+		if (val & REG_STATUS_LOCK)
+			break;
+		msleep(12);
+	}
+	if (!(val & REG_STATUS_LOCK))
+		return;
+
+	lgs8gl5_write_reg(state, REG_7D, lgs8gl5_read_reg(state, REG_A2));
+	lgs8gl5_soft_reset(state);
+}
+
+
+static int
+lgs8gl5_init(struct dvb_frontend *fe)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+
+	dprintk("%s\n", __func__);
+
+	lgs8gl5_update_alt_reg(state, 0xc2, 0x28);
+	lgs8gl5_soft_reset(state);
+	lgs8gl5_update_reg(state, REG_07, 0x10);
+	lgs8gl5_update_reg(state, REG_07, 0x10);
+	lgs8gl5_write_reg(state, REG_09, 0x0e);
+	lgs8gl5_write_reg(state, REG_0A, 0xe5);
+	lgs8gl5_write_reg(state, REG_0B, 0x35);
+	lgs8gl5_write_reg(state, REG_0C, 0x30);
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	u8 level = lgs8gl5_read_reg(state, REG_STRENGTH);
+	u8 flags = lgs8gl5_read_reg(state, REG_STATUS);
+
+	*status = 0;
+
+	if ((level & REG_STRENGTH_MASK) > 0)
+		*status |= FE_HAS_SIGNAL;
+	if (level & REG_STRENGTH_CARRIER)
+		*status |= FE_HAS_CARRIER;
+	if (flags & REG_STATUS_SYNC)
+		*status |= FE_HAS_SYNC;
+	if (flags & REG_STATUS_LOCK)
+		*status |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	*ber = 0;
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	u8 level = lgs8gl5_read_reg(state, REG_STRENGTH);
+	*signal_strength = (level & REG_STRENGTH_MASK) << 8;
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	u8 level = lgs8gl5_read_reg(state, REG_STRENGTH);
+	*snr = (level & REG_STRENGTH_MASK) << 8;
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	*ucblocks = 0;
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_set_frontend(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *p)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+
+	dprintk("%s\n", __func__);
+
+	if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ)
+		return -EINVAL;
+
+	if (fe->ops.tuner_ops.set_params) {
+		fe->ops.tuner_ops.set_params(fe, p);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
+	}
+
+	/* lgs8gl5_set_inversion(state, p->inversion); */
+
+	lgs8gl5_start_demod(state);
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_get_frontend(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *p)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	u8 inv = lgs8gl5_read_reg(state, REG_INVERSION);
+	struct dvb_ofdm_parameters *o = &p->u.ofdm;
+
+	p->inversion = (inv & REG_INVERSION_ON) ? INVERSION_ON : INVERSION_OFF;
+
+	o->code_rate_HP = FEC_1_2;
+	o->code_rate_LP = FEC_7_8;
+	o->guard_interval = GUARD_INTERVAL_1_32;
+	o->transmission_mode = TRANSMISSION_MODE_2K;
+	o->constellation = QAM_64;
+	o->hierarchy_information = HIERARCHY_NONE;
+	o->bandwidth = BANDWIDTH_8_MHZ;
+
+	return 0;
+}
+
+
+static int
+lgs8gl5_get_tune_settings(struct dvb_frontend *fe,
+		struct dvb_frontend_tune_settings *fesettings)
+{
+	fesettings->min_delay_ms = 240;
+	fesettings->step_size    = 0;
+	fesettings->max_drift    = 0;
+	return 0;
+}
+
+
+static void
+lgs8gl5_release(struct dvb_frontend *fe)
+{
+	struct lgs8gl5_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+
+static struct dvb_frontend_ops lgs8gl5_ops;
+
+
+struct dvb_frontend*
+lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c)
+{
+	struct lgs8gl5_state *state = NULL;
+
+	dprintk("%s\n", __func__);
+
+	/* Allocate memory for the internal state */
+	state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* Setup the state */
+	state->config = config;
+	state->i2c    = i2c;
+
+	/* Check if the demod is there */
+	if (lgs8gl5_read_reg(state, REG_RESET) < 0)
+		goto error;
+
+	/* Create dvb_frontend */
+	memcpy(&state->frontend.ops, &lgs8gl5_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(lgs8gl5_attach);
+
+
+static struct dvb_frontend_ops lgs8gl5_ops = {
+	.info = {
+		.name			= "Legend Silicon LGS-8GL5 DMB-TH",
+		.type			= FE_OFDM,
+		.frequency_min		= 474000000,
+		.frequency_max		= 858000000,
+		.frequency_stepsize	= 10000,
+		.frequency_tolerance	= 0,
+		.caps = FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_32 |
+			FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_BANDWIDTH_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO |
+			FE_CAN_RECOVER
+	},
+
+	.release = lgs8gl5_release,
+
+	.init = lgs8gl5_init,
+
+	.set_frontend = lgs8gl5_set_frontend,
+	.get_frontend = lgs8gl5_get_frontend,
+	.get_tune_settings = lgs8gl5_get_tune_settings,
+
+	.read_status = lgs8gl5_read_status,
+	.read_ber = lgs8gl5_read_ber,
+	.read_signal_strength = lgs8gl5_read_signal_strength,
+	.read_snr = lgs8gl5_read_snr,
+	.read_ucblocks = lgs8gl5_read_ucblocks,
+};
+
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("Legend Silicon LGS-8GL5 DMB-TH Demodulator driver");
+MODULE_AUTHOR("Timothy Lee");
+MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/dvb/frontends/lgs8gl5.h b/linux/drivers/media/dvb/frontends/lgs8gl5.h
new file mode 100644
index 000000000..d14176787
--- /dev/null
+++ b/linux/drivers/media/dvb/frontends/lgs8gl5.h
@@ -0,0 +1,45 @@
+/*
+    Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver
+
+    Copyright (C) 2008 Sirius International (Hong Kong) Limited
+	Timothy Lee <timothy.lee@siriushk.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#ifndef LGS8GL5_H
+#define LGS8GL5_H
+
+#include <linux/dvb/frontend.h>
+
+struct lgs8gl5_config {
+	/* the demodulator's i2c address */
+	u8 demod_address;
+};
+
+#if defined(CONFIG_DVB_LGS8GL5) || \
+	(defined(CONFIG_DVB_LGS8GL5_MODULE) && defined(MODULE))
+extern struct dvb_frontend *lgs8gl5_attach(
+	const struct lgs8gl5_config *config, struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *lgs8gl5_attach(
+	const struct lgs8gl5_config *config, struct i2c_adapter *i2c) {
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_LGS8GL5 */
+
+#endif /* LGS8GL5_H */
-- 
cgit v1.2.3


From 7fd7d21d543d90ecf1086f9c5909bd4c01cf69ae Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Sat, 9 Aug 2008 14:29:46 -0400
Subject: lgs8gl5: fix build warnings

From: Michael Krufky <mkrufky@linuxtv.org>

Fix the following build warnings:

lgs8gl5.c: In function 'lgs8gl5_read_reg':
lgs8gl5.c:95: warning: unused variable 'j'
lgs8gl5.c: In function 'lgs8gl5_update_alt_reg':
lgs8gl5.c:135: warning: unused variable 'j'
lgs8gl5.c: In function 'lgs8gl5_read_ber':
lgs8gl5.c:300: warning: unused variable 'state'
lgs8gl5.c: In function 'lgs8gl5_read_ucblocks':
lgs8gl5.c:332: warning: unused variable 'state'
lgs8gl5.c: At top level:
lgs8gl5.c:181: warning: 'lgs8gl5_set_inversion' defined but not used

Priority: normal

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
 linux/drivers/media/dvb/frontends/lgs8gl5.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'linux/drivers/media/dvb')

diff --git a/linux/drivers/media/dvb/frontends/lgs8gl5.c b/linux/drivers/media/dvb/frontends/lgs8gl5.c
index c0a223d28..380ae1868 100644
--- a/linux/drivers/media/dvb/frontends/lgs8gl5.c
+++ b/linux/drivers/media/dvb/frontends/lgs8gl5.c
@@ -92,7 +92,7 @@ lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
 static int
 lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg)
 {
-	int ret, j;
+	int ret;
 	u8 b0[] = {reg};
 	u8 b1[] = {0};
 	struct i2c_msg msg[2] = {
@@ -132,7 +132,7 @@ lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
 static int
 lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data)
 {
-	int ret, j;
+	int ret;
 	u8 b0[] = {reg};
 	u8 b1[] = {0};
 	u8 b2[] = {reg, data};
@@ -175,7 +175,7 @@ lgs8gl5_soft_reset(struct lgs8gl5_state *state)
 	msleep(5);
 }
 
-
+#if 0
 static int
 lgs8gl5_set_inversion(struct lgs8gl5_state *state, int inversion)
 {
@@ -198,7 +198,7 @@ lgs8gl5_set_inversion(struct lgs8gl5_state *state, int inversion)
 		return -EINVAL;
 	}
 }
-
+#endif
 
 /* Starts demodulation */
 static void
@@ -297,7 +297,6 @@ lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status)
 static int
 lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
-	struct lgs8gl5_state *state = fe->demodulator_priv;
 	*ber = 0;
 
 	return 0;
@@ -329,7 +328,6 @@ lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr)
 static int
 lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 {
-	struct lgs8gl5_state *state = fe->demodulator_priv;
 	*ucblocks = 0;
 
 	return 0;
-- 
cgit v1.2.3