From 4b038fe7fa0a646fedf0e49aa2bfba38c814e3ad Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Tue, 9 Jun 2009 19:47:21 -0400 Subject: cx18: Add DVB-T support for the Leadtek WinFast DVR3100 H From: Andy Walls This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog TV capture from the tuner working properly as well. DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of Leadtek. DVB-T 7 MHz has also been verified working with a change developed by Terry to the tuner-xc2028.c driver. Special thanks go to Terry Wu of Leadtek who provided the needed information and testing to get digital TV working for the Leadtek DVR3100 H. Reported-by: Terry Wu Priority: normal Tested-by: Terry Wu Signed-off-by: Andy Walls --- linux/drivers/media/video/cx18/cx18-cards.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'linux/drivers/media/video/cx18/cx18-cards.c') diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c index 3a155d7bd..fa755a982 100644 --- a/linux/drivers/media/video/cx18/cx18-cards.c +++ b/linux/drivers/media/video/cx18/cx18-cards.c @@ -380,10 +380,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = { }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* - * Pointer to proper DDR config values provided by - * Terry Wu - */ + /* Pointer to proper DDR config values provided by Terry Wu */ .chip_config = 0x303, .refresh = 0x3bb, .timing1 = 0x24220e83, @@ -412,13 +409,13 @@ static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = { static const struct cx18_card cx18_card_leadtek_dvr3100h = { .type = CX18_CARD_LEADTEK_DVR3100H, .name = "Leadtek WinFast DVR3100 H", - .comment = "Experimenters and photos needed for device to work well.\n" - "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .comment = "Simultaneous DVB-T and Analog capture supported,\n" + "\texcept when capturing Analog from the antenna input.\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, .hw_muxer = CX18_HW_GPIO_MUX, .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX | - CX18_HW_GPIO_RESET_CTRL, + CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -435,10 +432,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = { }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* - * Pointer to proper DDR config values provided by - * Terry Wu - */ + /* Pointer to proper DDR config values provided by Terry Wu */ .chip_config = 0x303, .refresh = 0x3bb, .timing1 = 0x24220e83, @@ -450,7 +444,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = { .gpio_init.direction = 0x7, .gpio_audio_input = { .mask = 0x7, .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, - .xceive_pin = 15, + .xceive_pin = 1, .pci_list = cx18_pci_leadtek_dvr3100h, .i2c = &cx18_i2c_std, }; -- cgit v1.2.3