From a7dc2838bf1a5069828ca5a4f9e7a35916c95f7e Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 28 Apr 2009 13:35:27 -0400 Subject: cx88: Fix race condition between cx8800 startup and hald From: Devin Heitmueller A power management fix to properly put the xc5000 into low power mode revealed a race condition where hald could detect the creation of the device file and connect to the device while the initial device configuration is still in progress. Lock the core structure so that video_release cannot be called and put the tuner to sleep in the middle of the initial call to cx88_set_tvnorm() in cx8800_initdev() Thanks to Michael Krufky for discovering the issue and providing an environment to test in. Priority: normal Signed-off-by: Devin Heitmueller Cc: Michael Krufky --- linux/drivers/media/video/cx88/cx88-video.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx88/cx88-video.c b/linux/drivers/media/video/cx88/cx88-video.c index 88a326f61..2dfa4c9c3 100644 --- a/linux/drivers/media/video/cx88/cx88-video.c +++ b/linux/drivers/media/video/cx88/cx88-video.c @@ -1152,8 +1152,10 @@ static int video_release(struct file *file) file->private_data = NULL; kfree(fh); + mutex_lock(&dev->core->lock); if(atomic_dec_and_test(&dev->core->users)) call_all(dev->core, tuner, s_standby); + mutex_unlock(&dev->core->lock); return 0; } -- cgit v1.2.3 From 54b87636a17edc58610c96dbac2b4f7e984c21ec Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 20 May 2009 15:06:10 -0400 Subject: saa7134: fix quirk in saa7134_i2c_xfer for the saa7131 bridge From: Michael Krufky The i2c quirk in the saa7134_i2c_xfer function does a bogus write to i2c address 0xfd, to work around a bug in the silicon that affects read transactions. Unfortunately, this hack is not working properly, since the bogus write is to 0xfd, an invalid i2c address. Fix this quirk by using an actual valid i2c address, 0xfe, which is still unlikely to be used as an i2c address for any actual i2c client. This is required in order to properly communicate with a TDA10048 DVB-T demod located at i2c address 0x10 on the primary i2c bus. Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/saa7134/saa7134-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-i2c.c b/linux/drivers/media/video/saa7134/saa7134-i2c.c index 3eb60aabe..78f9cac3d 100644 --- a/linux/drivers/media/video/saa7134/saa7134-i2c.c +++ b/linux/drivers/media/video/saa7134/saa7134-i2c.c @@ -264,7 +264,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, /* workaround for a saa7134 i2c bug * needed to talk to the mt352 demux * thanks to pinnacle for the hint */ - int quirk = 0xfd; + int quirk = 0xfe; d1printk(" [%02x quirk]",quirk); i2c_send_byte(dev,START,quirk); i2c_recv_byte(dev); -- cgit v1.2.3 From b17aee4b149a0625595ffec502db3a31094bfaec Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 18 Jan 2009 23:10:49 -0500 Subject: saa7134: enable digital tv support for Hauppauge WinTV-HVR1110r3 From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/saa7134/Kconfig | 1 + linux/drivers/media/video/saa7134/saa7134-cards.c | 4 +++- linux/drivers/media/video/saa7134/saa7134-dvb.c | 26 +++++++++++++++++++++++ 3 files changed, 30 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/Kconfig b/linux/drivers/media/video/saa7134/Kconfig index 0ba68987b..5bcce092e 100644 --- a/linux/drivers/media/video/saa7134/Kconfig +++ b/linux/drivers/media/video/saa7134/Kconfig @@ -44,6 +44,7 @@ config VIDEO_SAA7134_DVB select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE ---help--- diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c index a4e3deac2..587209fdd 100644 --- a/linux/drivers/media/video/saa7134/saa7134-cards.c +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c @@ -3403,13 +3403,15 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = { - .name = "Hauppauge WinTV-HVR1110r3", + .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tuner_config = 3, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_SERIAL, .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ .inputs = {{ .name = name_tv, diff --git a/linux/drivers/media/video/saa7134/saa7134-dvb.c b/linux/drivers/media/video/saa7134/saa7134-dvb.c index 2e1344ecf..360fbdf19 100644 --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c @@ -48,6 +48,7 @@ #include "isl6405.h" #include "lnbp21.h" #include "tuner-simple.h" +#include "tda10048.h" #include "tda18271.h" #include "lgdt3305.h" #include "tda8290.h" @@ -978,6 +979,18 @@ static struct lgdt3305_config hcw_lgdt3305_config = { .vsb_if_khz = 3250, }; +static struct tda10048_config hcw_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + static struct tda18271_std_map hauppauge_tda18271_std_map = { .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, .if_lvl = 1, .rfagc_top = 0x58, }, @@ -1106,6 +1119,19 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_2) < 0) goto dettach_frontend; break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hcw_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &hcw_tda18271_config); + } + break; case SAA7134_BOARD_PHILIPS_TIGER: if (configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0) < 0) -- cgit v1.2.3 From 88c300ff3c421a23a0c8e72a0c768f58e74f9221 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 2 Apr 2009 21:14:51 -0400 Subject: au0828: reduce reset time for xc5000 to 10ms From: Devin Heitmueller The xc5000 datasheet indicates that the reset pin only needs to be held low for 10ms. Reduce the value accordingly, which speeds up the firmware load time a bit. Priority: normal Signed-off-by: Devin Heitmueller --- linux/drivers/media/video/au0828/au0828-cards.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/au0828/au0828-cards.c b/linux/drivers/media/video/au0828/au0828-cards.c index 053bbe8c8..830c4a933 100644 --- a/linux/drivers/media/video/au0828/au0828-cards.c +++ b/linux/drivers/media/video/au0828/au0828-cards.c @@ -136,9 +136,9 @@ int au0828_tuner_callback(void *priv, int component, int command, int arg) /* Tuner Reset Command from xc5000 */ /* Drive the tuner into reset and out */ au0828_clear(dev, REG_001, 2); - mdelay(200); + mdelay(10); au0828_set(dev, REG_001, 2); - mdelay(50); + mdelay(10); return 0; } else { printk(KERN_ERR -- cgit v1.2.3 From 7b7dbf06c3c16bf46bd2954ad07325f6b43fb367 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 5 Apr 2009 23:51:38 -0500 Subject: pvrusb2: Select, track, and report IR scheme in use with the device From: Mike Isely This change defines all possible "IR schemes" related to the pvrusb2 driver, on a per-device basis. That information is then set according to the hardware in use. The idea here is to make possible a more intelligent future decision on which, if any, IR receiver driver might be loaded during initialization. Priority: normal Signed-off-by: Mike Isely --- .../drivers/media/video/pvrusb2/pvrusb2-devattr.c | 1 + .../drivers/media/video/pvrusb2/pvrusb2-devattr.h | 22 +++++++--------------- .../media/video/pvrusb2/pvrusb2-hdw-internal.h | 3 +++ linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c | 18 +++++++++++++++++- .../drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 12 ++++++++++-- 5 files changed, 38 insertions(+), 18 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 129de13da..341af4355 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -71,6 +71,7 @@ static const struct pvr2_device_desc pvr2_device_29xxx = { .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, + .ir_scheme = PVR2_IR_SCHEME_29XXX, }; diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 3e553389c..73e0e0ba0 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -78,8 +78,10 @@ struct pvr2_string_table { #define PVR2_LED_SCHEME_HAUPPAUGE 1 #define PVR2_IR_SCHEME_NONE 0 -#define PVR2_IR_SCHEME_24XXX 1 -#define PVR2_IR_SCHEME_ZILOG 2 +#define PVR2_IR_SCHEME_24XXX 1 /* FX2-controlled IR */ +#define PVR2_IR_SCHEME_ZILOG 2 /* HVR-1950 style (must be taken out of reset) */ +#define PVR2_IR_SCHEME_24XXX_MCE 3 /* 24xxx MCE device */ +#define PVR2_IR_SCHEME_29XXX 4 /* Original 29xxx device */ /* This describes a particular hardware type (except for the USB device ID which must live in a separate structure due to environmental @@ -162,19 +164,9 @@ struct pvr2_device_desc { ensure that it is found. */ unsigned int flag_has_wm8775:1; - /* Indicate any specialized IR scheme that might need to be - supported by this driver. If not set, then it is assumed that - IR can work without help from the driver (which is frequently - the case). This is otherwise set to one of - PVR2_IR_SCHEME_xxxx. For "xxxx", the value "24XXX" indicates a - Hauppauge 24xxx class device which has an FPGA-hosted IR - receiver that can only be reached via FX2 command codes. In - that case the pvrusb2 driver will emulate the behavior of the - older 29xxx device's IR receiver (a "virtual" I2C chip) in terms - of those command codes. For the value "ZILOG", we're dealing - with an IR chip that must be taken out of reset via another FX2 - command code (which is the case for HVR-1950 devices). */ - unsigned int ir_scheme:2; + /* Indicate IR scheme of hardware. If not set, then it is assumed + that IR can work without any help from the driver. */ + unsigned int ir_scheme:3; /* These bits define which kinds of sources the device can handle. Note: Digital tuner presence is inferred by the diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 5d75eb521..5b152ff20 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -200,6 +200,9 @@ struct pvr2_hdw { int i2c_cx25840_hack_state; int i2c_linked; + /* IR related */ + unsigned int ir_scheme_active; /* IR scheme as seen from the outside */ + /* Frequency table */ unsigned int freqTable[FREQTABLE_SIZE]; unsigned int freqProgSlot; diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c index c0e1e2cc9..b07daea8c 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -143,6 +143,15 @@ static const unsigned char *module_i2c_addresses[] = { }; +static const char *ir_scheme_names[] = { + [PVR2_IR_SCHEME_NONE] = "none", + [PVR2_IR_SCHEME_29XXX] = "29xxx", + [PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)", + [PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)", + [PVR2_IR_SCHEME_ZILOG] = "Zilog", +}; + + /* Define the list of additional controls we'll dynamically construct based on query of the cx2341x module. */ struct pvr2_mpeg_ids { @@ -2187,7 +2196,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) } /* Take the IR chip out of reset, if appropriate */ - if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_ZILOG) { + if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) { pvr2_issue_simple_cmd(hdw, FX2CMD_HCW_ZILOG_RESET | (1 << 8) | @@ -2468,6 +2477,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, GFP_KERNEL); if (!hdw->controls) goto fail; hdw->hdw_desc = hdw_desc; + hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme; for (idx = 0; idx < hdw->control_cnt; idx++) { cptr = hdw->controls + idx; cptr->hdw = hdw; @@ -4903,6 +4913,12 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, stats.buffers_processed, stats.buffers_failed); } + case 6: { + unsigned int id = hdw->ir_scheme_active; + return scnprintf(buf, acnt, "ir scheme: id=%d %s", id, + (id >= ARRAY_SIZE(ir_scheme_names) ? + "?" : ir_scheme_names[id])); + } default: break; } return 0; diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 919a4f4e1..4c761161f 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -652,7 +652,9 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) printk(KERN_INFO "%s: IR disabled\n",hdw->name); hdw->i2c_func[0x18] = i2c_black_hole; } else if (ir_mode[hdw->unit_number] == 1) { - if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) { + if (hdw->ir_scheme_active == PVR2_IR_SCHEME_24XXX) { + /* Set up translation so that our IR looks like a + 29xxx device */ hdw->i2c_func[0x18] = i2c_24xxx_ir; } } @@ -675,12 +677,18 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) i2c_add_adapter(&hdw->i2c_adap); if (hdw->i2c_func[0x18] == i2c_24xxx_ir) { /* Probe for a different type of IR receiver on this - device. If present, disable the emulated IR receiver. */ + device. This is really the only way to differentiate + older 24xxx devices from 24xxx variants that include an + IR blaster. If the IR blaster is present, the IR + receiver is part of that chip and thus we must disable + the emulated IR receiver. */ if (do_i2c_probe(hdw, 0x71)) { pvr2_trace(PVR2_TRACE_INFO, "Device has newer IR hardware;" " disabling unneeded virtual IR device"); hdw->i2c_func[0x18] = NULL; + /* Remember that this is a different device... */ + hdw->ir_scheme_active = PVR2_IR_SCHEME_24XXX_MCE; } } if (i2c_scan) do_i2c_scan(hdw); -- cgit v1.2.3 From 3a5029e47ebbbb4707dce75ad6beebe667224ba5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 9 May 2009 21:45:37 +0200 Subject: soc-camera: Fix section mismatch warning From: Guennadi Liakhovetski modpost needs a __refdata marker in driver structs to ensure references to .probe and .remove functions from .devinit.text and .devexit.text sections respectively are valid. Add __refdata to soc_camera_pdrv platform driver. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/soc_camera.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/soc_camera.c b/linux/drivers/media/video/soc_camera.c index f792ab2e5..822052b25 100644 --- a/linux/drivers/media/video/soc_camera.c +++ b/linux/drivers/media/video/soc_camera.c @@ -1204,7 +1204,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev) return 0; } -static struct platform_driver soc_camera_pdrv = { +static struct platform_driver __refdata soc_camera_pdrv = { .probe = soc_camera_pdrv_probe, .remove = __exit_p(soc_camera_pdrv_remove), .driver = { -- cgit v1.2.3 From 4c50c14ed35b0df615ad59f74cadbbaf52b0c657 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 26 Apr 2009 15:31:26 +0000 Subject: V4L/DVB: cx23885/cymax2: binary/logical &/&& typo From: Roel Kluin Signed-off-by: Roel Kluin Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/cx23885/cimax2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cimax2.c b/linux/drivers/media/video/cx23885/cimax2.c index 0e29f97f3..fed6d9f9f 100644 --- a/linux/drivers/media/video/cx23885/cimax2.c +++ b/linux/drivers/media/video/cx23885/cimax2.c @@ -320,7 +320,7 @@ static void netup_read_ci_status(struct work_struct *work) "TS config = %02x\n", __func__, state->ci_i2c_addr, 0, buf[0], buf[32]); - if (buf[0] && 1) + if (buf[0] & 1) state->status = DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; else -- cgit v1.2.3 From b6e7822b8f96c2e514b0ec863de373928a2e14e2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 28 Apr 2009 08:45:39 +0000 Subject: buf-dma-contig: remove sync operation From: Magnus Damm Remove the videobuf-dma-contig sync operation. Sync is only needed for noncoherent buffers, and since videobuf-dma-contig is built on coherent memory allocators the memory is by definition always in sync. Reported-by: Matthieu CASTET Signed-off-by: Magnus Damm Reviewed-by: Paul Mundt Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/videobuf-dma-contig.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/videobuf-dma-contig.c b/linux/drivers/media/video/videobuf-dma-contig.c index 6db1398fd..633a124cf 100644 --- a/linux/drivers/media/video/videobuf-dma-contig.c +++ b/linux/drivers/media/video/videobuf-dma-contig.c @@ -183,19 +183,6 @@ static int __videobuf_iolock(struct videobuf_queue *q, return 0; } -static int __videobuf_sync(struct videobuf_queue *q, - struct videobuf_buffer *buf) -{ - struct videobuf_dma_contig_memory *mem = buf->priv; - - BUG_ON(!mem); - MAGIC_CHECK(mem->magic, MAGIC_DC_MEM); - - dma_sync_single_for_cpu(q->dev, mem->dma_handle, mem->size, - DMA_FROM_DEVICE); - return 0; -} - static int __videobuf_mmap_free(struct videobuf_queue *q) { unsigned int i; @@ -357,7 +344,6 @@ static struct videobuf_qtype_ops qops = { .alloc = __videobuf_alloc, .iolock = __videobuf_iolock, - .sync = __videobuf_sync, .mmap_free = __videobuf_mmap_free, .mmap_mapper = __videobuf_mmap_mapper, .video_copy_to_user = __videobuf_copy_to_user, -- cgit v1.2.3 From bcd4645cb019d22f5addac33a51fc424a3cf042d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 28 Apr 2009 22:44:05 +0000 Subject: saa7134: disable not yet existing IR and DVB support on the Compro T750 From: hermann pitton The Compro VideoMate T750 has no support for IR and DVB-T yet. Disable both to avoid fall through and confusing printouts. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-cards.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c index 582a56c07..a4e3deac2 100644 --- a/linux/drivers/media/video/saa7134/saa7134-cards.c +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c @@ -4826,7 +4826,6 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, .vmux = 3, @@ -6580,7 +6579,6 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_VIDEOMATE_DVBT_300: case SAA7134_BOARD_VIDEOMATE_DVBT_200: case SAA7134_BOARD_VIDEOMATE_DVBT_200A: - case SAA7134_BOARD_VIDEOMATE_T750: case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: case SAA7134_BOARD_BEHOLD_409FM: -- cgit v1.2.3 From 42a150036e0f0f58c5882319cec52b76a401471c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 28 Apr 2009 09:41:08 +0000 Subject: increase MPEG encoder timout From: Dmitri Belimov Hi All. If video has a lot of changes in frame, MPEG encoder need more time for coding process. Add new bigger timeout for encoder. This is patch from our customer. I checked this. Signed-off-by: Alexey Osipov Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-ts.c | 2 +- linux/drivers/media/video/saa7134/saa7134.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-ts.c b/linux/drivers/media/video/saa7134/saa7134-ts.c index cc8b923af..b8ff459d0 100644 --- a/linux/drivers/media/video/saa7134/saa7134-ts.c +++ b/linux/drivers/media/video/saa7134/saa7134-ts.c @@ -65,7 +65,7 @@ static int buffer_activate(struct saa7134_dev *dev, /* start DMA */ saa7134_set_dmabits(dev); - mod_timer(&dev->ts_q.timeout, jiffies+BUFFER_TIMEOUT); + mod_timer(&dev->ts_q.timeout, jiffies+TS_BUFFER_TIMEOUT); if (dev->ts_state == SAA7134_TS_BUFF_DONE) { /* Clear TS cache */ diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h index d961e0861..ae7ba8923 100644 --- a/linux/drivers/media/video/saa7134/saa7134.h +++ b/linux/drivers/media/video/saa7134/saa7134.h @@ -377,6 +377,7 @@ struct saa7134_board { #define INTERLACE_OFF 2 #define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ +#define TS_BUFFER_TIMEOUT msecs_to_jiffies(1000) /* 1 second */ struct saa7134_dev; struct saa7134_dma; -- cgit v1.2.3 From ed9027e5c1c8f80d44d34d80514e48469bc61c0f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 28 Apr 2009 09:46:15 +0000 Subject: remove hw reset of MPEG encoder when lost/found seq. From: Dmitri Belimov When we capture signal from composite input offen lost and found syncro sequence. In this case the MPEG coder hardware reset after each lost/found event. The image has a lot of artefactes. This patch remove hardware reset of MPEG encoder. This is patch from our customer. I checked this. With my best regards, Dmitry. Signed-off-by: Alexey Osipov Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-empress.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-empress.c b/linux/drivers/media/video/saa7134/saa7134-empress.c index bab6b56c8..dd22a5215 100644 --- a/linux/drivers/media/video/saa7134/saa7134-empress.c +++ b/linux/drivers/media/video/saa7134/saa7134-empress.c @@ -499,11 +499,8 @@ static void empress_signal_update(struct work_struct *work) if (dev->nosignal) { dprintk("no video signal\n"); - ts_reset_encoder(dev); } else { dprintk("video signal acquired\n"); - if (atomic_read(&dev->empress_users)) - ts_init_encoder(dev); } } -- cgit v1.2.3 From 6ef6553900dddf6ab737699fbae806b1cf03486a Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 28 Apr 2009 13:07:14 -0400 Subject: xc5000: don't load firmware until a tuning request is made From: Devin Heitmueller Defer loading of the xc5000 firmware until it is actually needed. This helps on distros that have hald, which results in the device not being available for use for around ten seconds in cases where the i2c bus is slow (such as the HVR-950Q). Also, the firmware load isn't really useful since we immediately put the device to sleep afterward, which means a firmware reload will be required anyway. Priority: normal Signed-off-by: Devin Heitmueller --- linux/drivers/media/video/tuner-core.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/tuner-core.c b/linux/drivers/media/video/tuner-core.c index bb60c910e..cb715f143 100644 --- a/linux/drivers/media/video/tuner-core.c +++ b/linux/drivers/media/video/tuner-core.c @@ -434,10 +434,6 @@ static void set_type(struct i2c_client *c, unsigned int type, if (!dvb_attach(xc5000_attach, &t->fe, t->i2c->adapter, &xc5000_cfg)) goto attach_failed; - - xc_tuner_ops = &t->fe.ops.tuner_ops; - if (xc_tuner_ops->init) - xc_tuner_ops->init(&t->fe); break; } default: -- cgit v1.2.3 From a7015afafe5781e175338757b833679614e4c252 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Apr 2009 06:55:31 +0000 Subject: Enabling of the Winfast TV2000 XP Global TV capture card remote control From: Pieter Van Schaik This patch is for supporting the remote control of the Winfast TV2000 XP Global TV capture card. A case statement was added in order to initialize the GPIO data structures as well as a case statement for handling the keys correctly when pressed. Thanks to Hermann and Mauro for all the help Signed-off-by: Pieter C van Schaik Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/cx88/cx88-input.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx88/cx88-input.c b/linux/drivers/media/video/cx88/cx88-input.c index facb2e800..dad809335 100644 --- a/linux/drivers/media/video/cx88/cx88-input.c +++ b/linux/drivers/media/video/cx88/cx88-input.c @@ -92,6 +92,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) gpio=(gpio & 0x7fd) + (auxgpio & 0xef); break; case CX88_BOARD_WINFAST_DTV1000: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900); auxgpio = gpio; break; @@ -244,6 +245,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) break; case CX88_BOARD_WINFAST2000XP_EXPERT: case CX88_BOARD_WINFAST_DTV1000: + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; -- cgit v1.2.3 From 244c2bb5a4cd825df18e2ce0ed52675943888af1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Apr 2009 18:57:24 +0000 Subject: 2: modify return value of VIDIOC_REQBUFS ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Németh Márton The V4L2 ioctls usually return 0 when the operation was successful and -1 in case of error. Currently VIDIOC_REQBUFS returns the number of buffers which is redundant because this information is available in count field of struct v4l2_requestbuffers. The V4L2 API specification, revision 0.24 [1] explicitly specifies for VIDIOC_REQBUFS that the return value shall be 0 on success. The patch was tested with v4l-test 0.13 [2] with vivi driver. References: [1] V4L2 API specification, revision 0.24 http://v4l2spec.bytesex.org/spec/r13696.htm [2] v4l-test: Test environment for Video For Linux Two API http://v4l-test.sourceforge.net/ Signed-off-by: Márton Németh Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/videobuf-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/videobuf-core.c b/linux/drivers/media/video/videobuf-core.c index b104cd593..972f09836 100644 --- a/linux/drivers/media/video/videobuf-core.c +++ b/linux/drivers/media/video/videobuf-core.c @@ -440,6 +440,7 @@ int videobuf_reqbufs(struct videobuf_queue *q, } req->count = retval; + retval = 0; done: mutex_unlock(&q->vb_lock); -- cgit v1.2.3 From a2d7371dbe37dfa05b77b635e401e96be28796a2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 30 Apr 2009 08:40:07 +0000 Subject: Drop stray references to i2c_probe From: Jean Delvare The new i2c binding model doesn't use i2c_probe. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/tea6415c.c | 1 - linux/drivers/media/video/tea6420.c | 1 - 2 files changed, 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/tea6415c.c b/linux/drivers/media/video/tea6415c.c index de866798b..910e156f4 100644 --- a/linux/drivers/media/video/tea6415c.c +++ b/linux/drivers/media/video/tea6415c.c @@ -147,7 +147,6 @@ static const struct v4l2_subdev_ops tea6415c_ops = { .video = &tea6415c_video_ops, }; -/* this function is called by i2c_probe */ static int tea6415c_probe(struct i2c_client *client, const struct i2c_device_id *id) { diff --git a/linux/drivers/media/video/tea6420.c b/linux/drivers/media/video/tea6420.c index 90054dfbe..0e7bb8d6a 100644 --- a/linux/drivers/media/video/tea6420.c +++ b/linux/drivers/media/video/tea6420.c @@ -118,7 +118,6 @@ static const struct v4l2_subdev_ops tea6420_ops = { .audio = &tea6420_audio_ops, }; -/* this function is called by i2c_probe */ static int tea6420_probe(struct i2c_client *client, const struct i2c_device_id *id) { -- cgit v1.2.3 From 761fb9dc928dfb9fa78fe3ed6e9269c1fdcbc9b1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 30 Apr 2009 15:29:38 +0000 Subject: patch: s2255drv: urb completion routine fixes From: Dean Anderson Error count in read pipe completion corrected. URB not resubmitted if shutting down. URB not freed in completion routine if new urb_submit_fails. (URB is freed on shutdown). Priority: high Signed-off-by: Dean Anderson Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/s2255drv.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/s2255drv.c b/linux/drivers/media/video/s2255drv.c index 12ced841e..8a939387a 100644 --- a/linux/drivers/media/video/s2255drv.c +++ b/linux/drivers/media/video/s2255drv.c @@ -2240,8 +2240,10 @@ static void read_pipe_completion(struct urb *purb) return; } status = purb->status; - if (status != 0) { - dprintk(2, "read_pipe_completion: err\n"); + /* if shutting down, do not resubmit, exit immediately */ + if (status == -ESHUTDOWN) { + dprintk(2, "read_pipe_completion: err shutdown\n"); + pipe_info->err_count++; return; } @@ -2250,9 +2252,13 @@ static void read_pipe_completion(struct urb *purb) return; } - s2255_read_video_callback(dev, pipe_info); + if (status == 0) + s2255_read_video_callback(dev, pipe_info); + else { + pipe_info->err_count++; + dprintk(1, "s2255drv: failed URB %d\n", status); + } - pipe_info->err_count = 0; pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint); /* reuse urb */ usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, @@ -2264,7 +2270,6 @@ static void read_pipe_completion(struct urb *purb) if (pipe_info->state != 0) { if (usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL)) { dev_err(&dev->udev->dev, "error submitting urb\n"); - usb_free_urb(pipe_info->stream_urb); } } else { dprintk(2, "read pipe complete state 0\n"); -- cgit v1.2.3 From 0ea260891398ca8c39e7b6a524839125c0894ad9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 30 Apr 2009 22:18:08 +0000 Subject: remove driver_data direct access of struct device From: Greg Kroah-Hartman In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 7ed3b8453..d8ad83df3 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -548,7 +548,7 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp) &sfp->attr_unit_number); } pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev); - sfp->class_dev->driver_data = NULL; + dev_set_drvdata(sfp->class_dev, NULL); device_unregister(sfp->class_dev); sfp->class_dev = NULL; } @@ -558,7 +558,7 @@ static ssize_t v4l_minor_number_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%d\n", pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw, @@ -570,7 +570,7 @@ static ssize_t bus_info_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%s\n", pvr2_hdw_get_bus_info(sfp->channel.hdw)); @@ -581,7 +581,7 @@ static ssize_t hdw_name_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%s\n", pvr2_hdw_get_type(sfp->channel.hdw)); @@ -592,7 +592,7 @@ static ssize_t hdw_desc_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%s\n", pvr2_hdw_get_desc(sfp->channel.hdw)); @@ -604,7 +604,7 @@ static ssize_t v4l_radio_minor_number_show(struct device *class_dev, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%d\n", pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw, @@ -616,7 +616,7 @@ static ssize_t unit_number_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%d\n", pvr2_hdw_get_unit_number(sfp->channel.hdw)); @@ -644,7 +644,7 @@ static void class_dev_create(struct pvr2_sysfs *sfp, class_dev->parent = &usb_dev->dev; sfp->class_dev = class_dev; - class_dev->driver_data = sfp; + dev_set_drvdata(class_dev, sfp); ret = device_register(class_dev); if (ret) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, @@ -817,7 +817,7 @@ static ssize_t debuginfo_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; pvr2_hdw_trigger_module_log(sfp->channel.hdw); return pvr2_debugifc_print_info(sfp->channel.hdw,buf,PAGE_SIZE); @@ -828,7 +828,7 @@ static ssize_t debugcmd_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return pvr2_debugifc_print_status(sfp->channel.hdw,buf,PAGE_SIZE); } @@ -841,7 +841,7 @@ static ssize_t debugcmd_store(struct device *class_dev, struct pvr2_sysfs *sfp; int ret; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; ret = pvr2_debugifc_docmd(sfp->channel.hdw,buf,count); -- cgit v1.2.3 From e12bd28a677612320a63eca215a0b260ab897ffb Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Fri, 1 May 2009 20:23:39 -0500 Subject: pvrusb2: Update to work with upcoming ir_video changes in v4l-dvb core From: Mike Isely The ir-kbd-i2c module is about to be updated to match the new style i2c binding model. These pvrusb2 changes maintain compatibility with that change. Note that this does not actually break anything even without the expected ir-kbd-i2c changes yet because previously the pvrusb2 didn't autoload ir-kbd-i2c anyway. Priority: normal Signed-off-by: Mike Isely --- .../drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 4c761161f..694e51f58 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -43,6 +43,18 @@ static int ir_mode[PVR_NUM] = { [0 ... PVR_NUM-1] = 1 }; module_param_array(ir_mode, int, NULL, 0444); MODULE_PARM_DESC(ir_mode,"specify: 0=disable IR reception, 1=normal IR"); +static int pvr2_disable_ir_video; +module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video, + int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(disable_autoload_ir_video, + "1=do not try to autoload ir_video IR receiver"); + +/* Mapping of IR schemes to known I2C addresses - if any */ +static const unsigned char ir_video_addresses[] = { + [PVR2_IR_SCHEME_29XXX] = 0x18, + [PVR2_IR_SCHEME_24XXX] = 0x18, +}; + static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */ u8 i2c_addr, /* I2C address we're talking to */ u8 *data, /* Data to write */ @@ -637,6 +649,31 @@ static void do_i2c_scan(struct pvr2_hdw *hdw) printk(KERN_INFO "%s: i2c scan done.\n", hdw->name); } +static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) +{ + struct i2c_board_info info; + unsigned char addr = 0; + if (pvr2_disable_ir_video) { + pvr2_trace(PVR2_TRACE_INFO, + "Automatic binding of ir_video has been disabled."); + return; + } + if (hdw->ir_scheme_active < ARRAY_SIZE(ir_video_addresses)) { + addr = ir_video_addresses[hdw->ir_scheme_active]; + } + if (!addr) { + /* The device either doesn't support I2C-based IR or we + don't know (yet) how to operate IR on the device. */ + return; + } + pvr2_trace(PVR2_TRACE_INFO, + "Binding ir_video to i2c address 0x%02x.", addr); + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + info.addr = addr; + i2c_new_device(&hdw->i2c_adap, &info); +} + void pvr2_i2c_core_init(struct pvr2_hdw *hdw) { unsigned int idx; @@ -692,6 +729,8 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) } } if (i2c_scan) do_i2c_scan(hdw); + + pvr2_i2c_register_ir(hdw); } void pvr2_i2c_core_done(struct pvr2_hdw *hdw) -- cgit v1.2.3 From 961b6d8d20c76a4c210516ce2c9baa4df6d43527 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Fri, 1 May 2009 20:33:16 -0500 Subject: pvrusb2: Set ir_video autoloading to default disabled From: Mike Isely This sets the disable_autoload_ir_video module option to being set, which disables any attempt by the driver to autoload IR support. This changes preserves previous behavior, for now. This change can be set back concurrent with other changes that finally update i2c-kbd-i2c to use the new i2c binding model. Priority: normal Signed-off-by: Mike Isely --- linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 694e51f58..28463489a 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -43,7 +43,7 @@ static int ir_mode[PVR_NUM] = { [0 ... PVR_NUM-1] = 1 }; module_param_array(ir_mode, int, NULL, 0444); MODULE_PARM_DESC(ir_mode,"specify: 0=disable IR reception, 1=normal IR"); -static int pvr2_disable_ir_video; +static int pvr2_disable_ir_video = 1; module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(disable_autoload_ir_video, -- cgit v1.2.3 From 2a1a9acb2d85130c9e1b9f7dc7812e8846142bcc Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Fri, 1 May 2009 22:04:35 -0500 Subject: pvrusb2: Bump up version advertised through v4l interface From: Mike Isely Kick up the pvrusb2 version number advertised through the v4l interface. This value really has almost no meaning because I don't make a serious attempt to version the driver in this manner (otherwise this one line becomes a nasty hotspot of changes and merge conflicts). The value that is here is really a historical thing. However Hans Verkuil thought it might be a good idea to bump up the number anyway right now since the driver's mechanism for communicating with the v4l core has pretty much completely changed. Sending out a different version number can be useful for later debugging in case a problem arises. Priority: normal Signed-off-by: Mike Isely --- linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index c7fc605f8..adccf1cc8 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -91,7 +91,7 @@ static struct v4l2_capability pvr_capability ={ .driver = "pvrusb2", .card = "Hauppauge WinTV pvr-usb2", .bus_info = "usb", - .version = KERNEL_VERSION(0,8,0), + .version = KERNEL_VERSION(0, 9, 0), .capabilities = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO | V4L2_CAP_READWRITE), -- cgit v1.2.3 From 5fc20d3a3b9f5a7aed0f0e17174524ff7caf6f72 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Fri, 1 May 2009 22:22:27 -0500 Subject: pvrusb2: Don't use the internal i2c client list From: Jean Delvare The i2c core used to maintain a list of client for each adapter. This is a duplication of what the driver core already does, so this list will be removed as part of a future cleanup. Anyone using this list must stop doing so. For pvrusb2, I propose the following change, which should lead to an equally informative output. The only difference is that i2c clients which are not a v4l2 subdev won't show up, but I guess this case is not supposed to happen anyway. Priority: normal Signed-off-by: Jean Delvare Signed-off-by: Mike Isely --- linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c | 56 ++++++------------------- 1 file changed, 13 insertions(+), 43 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c index b07daea8c..3411cb36a 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -4935,65 +4935,35 @@ static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw, unsigned int tcnt = 0; unsigned int ccnt; struct i2c_client *client; - struct list_head *item; - void *cd; const char *p; unsigned int id; - ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers:"); + ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n"); tcnt += ccnt; v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) { id = sd->grp_id; p = NULL; if (id < ARRAY_SIZE(module_names)) p = module_names[id]; if (p) { - ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s", p); + ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s:", p); tcnt += ccnt; } else { ccnt = scnprintf(buf + tcnt, acnt - tcnt, - " (unknown id=%u)", id); + " (unknown id=%u):", id); tcnt += ccnt; } - } - ccnt = scnprintf(buf + tcnt, acnt - tcnt, "\n"); - tcnt += ccnt; - - ccnt = scnprintf(buf + tcnt, acnt - tcnt, "I2C clients:\n"); - tcnt += ccnt; - - mutex_lock(&hdw->i2c_adap.clist_lock); - list_for_each(item, &hdw->i2c_adap.clients) { - client = list_entry(item, struct i2c_client, list); - ccnt = scnprintf(buf + tcnt, acnt - tcnt, - " %s: i2c=%02x", client->name, client->addr); - tcnt += ccnt; - cd = i2c_get_clientdata(client); - v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) { - if (cd == sd) { - id = sd->grp_id; - p = NULL; - if (id < ARRAY_SIZE(module_names)) { - p = module_names[id]; - } - if (p) { - ccnt = scnprintf(buf + tcnt, - acnt - tcnt, - " subdev=%s", p); - tcnt += ccnt; - } else { - ccnt = scnprintf(buf + tcnt, - acnt - tcnt, - " subdev= id %u)", - id); - tcnt += ccnt; - } - break; - } + client = v4l2_get_subdevdata(sd); + if (client) { + ccnt = scnprintf(buf + tcnt, acnt - tcnt, + " %s @ %02x\n", client->name, + client->addr); + tcnt += ccnt; + } else { + ccnt = scnprintf(buf + tcnt, acnt - tcnt, + " no i2c client\n"); + tcnt += ccnt; } - ccnt = scnprintf(buf + tcnt, acnt - tcnt, "\n"); - tcnt += ccnt; } - mutex_unlock(&hdw->i2c_adap.clist_lock); return tcnt; } -- cgit v1.2.3 From bd5e7a9e095c77ae571573079f9f87181f73f0a5 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Fri, 1 May 2009 22:36:33 -0500 Subject: pvrusb2: remove driver_data direct access of struct device From: Greg Kroah-Hartman In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Priority: normal Cc: Mauro Carvalho Chehab Cc: linux-media@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Mike Isely --- linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 7ed3b8453..d8ad83df3 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -548,7 +548,7 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp) &sfp->attr_unit_number); } pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev); - sfp->class_dev->driver_data = NULL; + dev_set_drvdata(sfp->class_dev, NULL); device_unregister(sfp->class_dev); sfp->class_dev = NULL; } @@ -558,7 +558,7 @@ static ssize_t v4l_minor_number_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%d\n", pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw, @@ -570,7 +570,7 @@ static ssize_t bus_info_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%s\n", pvr2_hdw_get_bus_info(sfp->channel.hdw)); @@ -581,7 +581,7 @@ static ssize_t hdw_name_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%s\n", pvr2_hdw_get_type(sfp->channel.hdw)); @@ -592,7 +592,7 @@ static ssize_t hdw_desc_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%s\n", pvr2_hdw_get_desc(sfp->channel.hdw)); @@ -604,7 +604,7 @@ static ssize_t v4l_radio_minor_number_show(struct device *class_dev, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%d\n", pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw, @@ -616,7 +616,7 @@ static ssize_t unit_number_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return scnprintf(buf,PAGE_SIZE,"%d\n", pvr2_hdw_get_unit_number(sfp->channel.hdw)); @@ -644,7 +644,7 @@ static void class_dev_create(struct pvr2_sysfs *sfp, class_dev->parent = &usb_dev->dev; sfp->class_dev = class_dev; - class_dev->driver_data = sfp; + dev_set_drvdata(class_dev, sfp); ret = device_register(class_dev); if (ret) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, @@ -817,7 +817,7 @@ static ssize_t debuginfo_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; pvr2_hdw_trigger_module_log(sfp->channel.hdw); return pvr2_debugifc_print_info(sfp->channel.hdw,buf,PAGE_SIZE); @@ -828,7 +828,7 @@ static ssize_t debugcmd_show(struct device *class_dev, struct device_attribute *attr, char *buf) { struct pvr2_sysfs *sfp; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; return pvr2_debugifc_print_status(sfp->channel.hdw,buf,PAGE_SIZE); } @@ -841,7 +841,7 @@ static ssize_t debugcmd_store(struct device *class_dev, struct pvr2_sysfs *sfp; int ret; - sfp = (struct pvr2_sysfs *)class_dev->driver_data; + sfp = dev_get_drvdata(class_dev); if (!sfp) return -EINVAL; ret = pvr2_debugifc_docmd(sfp->channel.hdw,buf,count); -- cgit v1.2.3 From 36600a08afc4d3e85ae44cf92fb494933b003bb9 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 2 May 2009 10:29:50 -0400 Subject: cx23885: Add generic functions for driving GPIO's From: Steven Toth The GPIO's on the product can be in one of three places. To date we've mainly used the GPIO's on the bridge itself, and once on the encoder. Rather than having the complexity of multiple GPIO writes/reads from isolated placed in the driver we'll route them through this function, so we can make intelligent decisions about 1) Where the GPIO lives and 2) Whether it conflicts (based on board) with some other function to avoid bugs. Priority: normal Signed-off-by: Steven Toth Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-core.c | 82 ++++++++++++++++++++++++ linux/drivers/media/video/cx23885/cx23885.h | 16 +++++ 2 files changed, 98 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-core.c b/linux/drivers/media/video/cx23885/cx23885-core.c index 48f777b99..7ae527a6b 100644 --- a/linux/drivers/media/video/cx23885/cx23885-core.c +++ b/linux/drivers/media/video/cx23885/cx23885-core.c @@ -1744,6 +1744,88 @@ out: return IRQ_RETVAL(handled); } +int encoder_on_portb(struct cx23885_dev *dev) +{ + return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER; +} + +int encoder_on_portc(struct cx23885_dev *dev) +{ + return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER; +} + +/* Mask represents 32 different GPIOs, GPIO's are split into multiple + * registers depending on the board configuration (and whether the + * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will + * be pushed into the correct hardware register, regardless of the + * physical location. Certain registers are shared so we sanity check + * and report errors if we think we're tampering with a GPIo that might + * be assigned to the encoder (and used for the host bus). + * + * GPIO 2 thru 0 - On the cx23885 bridge + * GPIO 18 thru 3 - On the cx23417 host bus interface + * GPIO 23 thru 19 - On the cx25840 a/v core + */ +void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x7) + cx_set(GP0_IO, mask & 0x7); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Setting GPIO on encoder ports\n", + dev->name); + cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3); + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); +} + +void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x00000007) + cx_clear(GP0_IO, mask & 0x7); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Clearing GPIO moving on encoder ports\n", + dev->name); + cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3); + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); +} + +void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) +{ + if ((mask & 0x00000007) && asoutput) + cx_set(GP0_IO, (mask & 0x7) << 16); + else if ((mask & 0x00000007) && !asoutput) + cx_clear(GP0_IO, (mask & 0x7) << 16); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Enabling GPIO on encoder ports\n", + dev->name); + } + + /* MC417_OEN is active low for output, write 1 for an input */ + if ((mask & 0x0007fff8) && asoutput) + cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3); + + else if ((mask & 0x0007fff8) && !asoutput) + cx_set(MC417_OEN, (mask & 0x7fff8) >> 3); + + /* TODO: 23-19 */ +} + static int __devinit cx23885_initdev(struct pci_dev *pci_dev, const struct pci_device_id *pci_id) { diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 92828c9ce..4bc38d47d 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -73,6 +73,17 @@ #define CX23885_BOARD_DVBWORLD_2005 16 #define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 +#define GPIO_0 0x00000001 +#define GPIO_1 0x00000002 +#define GPIO_2 0x00000004 +#define GPIO_3 0x00000008 +#define GPIO_4 0x00000010 +#define GPIO_5 0x00000020 +#define GPIO_6 0x00000040 +#define GPIO_7 0x00000080 +#define GPIO_8 0x00000100 +#define GPIO_9 0x00000200 + /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | \ @@ -423,6 +434,11 @@ extern int cx23885_restart_queue(struct cx23885_tsport *port, extern void cx23885_wakeup(struct cx23885_tsport *port, struct cx23885_dmaqueue *q, u32 count); +extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask); +extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask); +extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, + int asoutput); + /* ----------------------------------------------------------- */ /* cx23885-cards.c */ -- cgit v1.2.3 From 38b8ac708c45ac944c7a69638d9b4afe73717849 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 11 May 2009 12:37:26 -0400 Subject: cx23885: mark functions encoder_on_port[bc] as static inline From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-core.c b/linux/drivers/media/video/cx23885/cx23885-core.c index 7ae527a6b..6988361c9 100644 --- a/linux/drivers/media/video/cx23885/cx23885-core.c +++ b/linux/drivers/media/video/cx23885/cx23885-core.c @@ -1744,12 +1744,12 @@ out: return IRQ_RETVAL(handled); } -int encoder_on_portb(struct cx23885_dev *dev) +static inline int encoder_on_portb(struct cx23885_dev *dev) { return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER; } -int encoder_on_portc(struct cx23885_dev *dev) +static inline int encoder_on_portc(struct cx23885_dev *dev) { return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER; } -- cgit v1.2.3 From d72082806f7688e66f823051fe7bc4f62acca533 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 2 May 2009 10:39:46 -0400 Subject: cx23885: Add preliminary support for the HVR1270 From: Steven Toth The patch means the board will be recognised, and the parts brought out of reset correctly. This patches depends on the centralized GPIO patch to be merged. What's missing before the HVR-1270 will function for DTV? The model# needs to be added to avoid 'unknown model' output and the LG3305/Tuner need to be attached in cx23885-dvb.c Priority: normal Signed-off-by: Steven Toth Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-cards.c | 21 +++++++++++++++++++++ linux/drivers/media/video/cx23885/cx23885.h | 1 + 2 files changed, 22 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 28f305dfd..bd608b4a0 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -182,6 +182,9 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1270] = { + .name = "Hauppauge WinTV-HVR1270", + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -281,6 +284,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x1b55, .subdevice = 0x2a2c, .card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI, + }, { + .subvendor = 0x0070, + .subdevice = 0x2211, + .card = CX23885_BOARD_HAUPPAUGE_HVR1270, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -620,6 +627,17 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* enable irq */ cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + /* GPIO-6 I2C Gate which can isolate the 3305 from the bus */ + /* GPIO-9 LG3305 reset */ + + /* Put the parts into reset and back */ + cx23885_gpio_enable(dev, GPIO_9 | GPIO_6, 1); + cx23885_gpio_set(dev, GPIO_9 | GPIO_6); + cx23885_gpio_clear(dev, GPIO_9); + mdelay(20); + cx23885_gpio_set(dev, GPIO_9); + break; } } @@ -632,6 +650,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1270: /* FIXME: Implement me */ break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: @@ -667,6 +686,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1270: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -724,6 +744,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_HAUPPAUGE_HVR1270: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 4bc38d47d..21d886212 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -72,6 +72,7 @@ #define CX23885_BOARD_TEVII_S470 15 #define CX23885_BOARD_DVBWORLD_2005 16 #define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 +#define CX23885_BOARD_HAUPPAUGE_HVR1270 18 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3 From b6846f8378e51e39a605b395c560986011bde203 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 2 May 2009 19:38:47 +0000 Subject: V4L/DVB: cleanup redundant tests on unsigned From: Roel Kluin Remove redundant tests on unsigned. Signed-off-by: Roel Kluin Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/cpia2/cpia2_v4l.c | 6 +++--- linux/drivers/media/video/hexium_gemini.c | 2 +- linux/drivers/media/video/hexium_orion.c | 2 +- linux/drivers/media/video/ivtv/ivtv-ioctl.c | 2 +- linux/drivers/media/video/mxb.c | 4 ++-- linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c | 4 ++-- linux/drivers/media/video/pwc/pwc-v4l.c | 2 +- linux/drivers/media/video/stk-webcam.c | 4 ++-- linux/drivers/media/video/usbvision/usbvision-video.c | 2 +- linux/drivers/media/video/videobuf-core.c | 4 ++-- 10 files changed, 16 insertions(+), 16 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cpia2/cpia2_v4l.c b/linux/drivers/media/video/cpia2/cpia2_v4l.c index d4099f531..0b4a8f309 100644 --- a/linux/drivers/media/video/cpia2/cpia2_v4l.c +++ b/linux/drivers/media/video/cpia2/cpia2_v4l.c @@ -1064,7 +1064,7 @@ static int ioctl_querymenu(void *arg,struct camera_data *cam) switch(m->id) { case CPIA2_CID_FLICKER_MODE: - if(m->index < 0 || m->index >= NUM_FLICKER_CONTROLS) + if (m->index >= NUM_FLICKER_CONTROLS) return -EINVAL; strcpy(m->name, flicker_controls[m->index].name); @@ -1082,14 +1082,14 @@ static int ioctl_querymenu(void *arg,struct camera_data *cam) maximum = i; } } - if(m->index < 0 || m->index > maximum) + if (m->index > maximum) return -EINVAL; strcpy(m->name, framerate_controls[m->index].name); break; } case CPIA2_CID_LIGHTS: - if(m->index < 0 || m->index >= NUM_LIGHTS_CONTROLS) + if (m->index >= NUM_LIGHTS_CONTROLS) return -EINVAL; strcpy(m->name, lights_controls[m->index].name); diff --git a/linux/drivers/media/video/hexium_gemini.c b/linux/drivers/media/video/hexium_gemini.c index bcd8144c5..e7dc0aa61 100644 --- a/linux/drivers/media/video/hexium_gemini.c +++ b/linux/drivers/media/video/hexium_gemini.c @@ -225,7 +225,7 @@ static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) { DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index)); - if (i->index < 0 || i->index >= HEXIUM_INPUTS) + if (i->index >= HEXIUM_INPUTS) return -EINVAL; memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input)); diff --git a/linux/drivers/media/video/hexium_orion.c b/linux/drivers/media/video/hexium_orion.c index 4178edcc2..d559c0e0c 100644 --- a/linux/drivers/media/video/hexium_orion.c +++ b/linux/drivers/media/video/hexium_orion.c @@ -326,7 +326,7 @@ static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) { DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index)); - if (i->index < 0 || i->index >= HEXIUM_INPUTS) + if (i->index >= HEXIUM_INPUTS) return -EINVAL; memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input)); diff --git a/linux/drivers/media/video/ivtv/ivtv-ioctl.c b/linux/drivers/media/video/ivtv/ivtv-ioctl.c index c342a9fe9..99f3c39a1 100644 --- a/linux/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/linux/drivers/media/video/ivtv/ivtv-ioctl.c @@ -709,7 +709,7 @@ static int ivtv_itvc(struct ivtv *itv, unsigned int cmd, void *arg) else if (itv->has_cx23415 && regs->reg >= IVTV_DECODER_OFFSET && regs->reg < IVTV_DECODER_OFFSET + IVTV_DECODER_SIZE) reg_start = itv->dec_mem - IVTV_DECODER_OFFSET; - else if (regs->reg >= 0 && regs->reg < IVTV_ENCODER_SIZE) + else if (regs->reg < IVTV_ENCODER_SIZE) reg_start = itv->enc_mem; else return -EINVAL; diff --git a/linux/drivers/media/video/mxb.c b/linux/drivers/media/video/mxb.c index 4a50c0e95..411efcd34 100644 --- a/linux/drivers/media/video/mxb.c +++ b/linux/drivers/media/video/mxb.c @@ -457,7 +457,7 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *vc) static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) { DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index)); - if (i->index < 0 || i->index >= MXB_INPUTS) + if (i->index >= MXB_INPUTS) return -EINVAL; memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); return 0; @@ -620,7 +620,7 @@ static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; struct mxb *mxb = (struct mxb *)dev->ext_priv; - if (a->index < 0 || a->index > MXB_INPUTS) { + if (a->index > MXB_INPUTS) { DEB_D(("VIDIOC_G_AUDIO %d out of range.\n", a->index)); return -EINVAL; } diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index c7fc605f8..11deb1ae1 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -268,7 +268,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(&tmp,0,sizeof(tmp)); tmp.index = vi->index; ret = 0; - if ((vi->index < 0) || (vi->index >= fh->input_cnt)) { + if (vi->index >= fh->input_cnt) { ret = -EINVAL; break; } @@ -332,7 +332,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOC_S_INPUT: { struct v4l2_input *vi = (struct v4l2_input *)arg; - if ((vi->index < 0) || (vi->index >= fh->input_cnt)) { + if (vi->index >= fh->input_cnt) { ret = -ERANGE; break; } diff --git a/linux/drivers/media/video/pwc/pwc-v4l.c b/linux/drivers/media/video/pwc/pwc-v4l.c index bc0a46429..2876ce084 100644 --- a/linux/drivers/media/video/pwc/pwc-v4l.c +++ b/linux/drivers/media/video/pwc/pwc-v4l.c @@ -1107,7 +1107,7 @@ long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg) return -EINVAL; if (buf->memory != V4L2_MEMORY_MMAP) return -EINVAL; - if (buf->index < 0 || buf->index >= pwc_mbufs) + if (buf->index >= pwc_mbufs) return -EINVAL; buf->flags |= V4L2_BUF_FLAG_QUEUED; diff --git a/linux/drivers/media/video/stk-webcam.c b/linux/drivers/media/video/stk-webcam.c index 7cbc4f736..886caf736 100644 --- a/linux/drivers/media/video/stk-webcam.c +++ b/linux/drivers/media/video/stk-webcam.c @@ -1138,7 +1138,7 @@ static int stk_vidioc_querybuf(struct file *filp, struct stk_camera *dev = priv; struct stk_sio_buffer *sbuf; - if (buf->index < 0 || buf->index >= dev->n_sbufs) + if (buf->index >= dev->n_sbufs) return -EINVAL; sbuf = dev->sio_bufs + buf->index; *buf = sbuf->v4lbuf; @@ -1155,7 +1155,7 @@ static int stk_vidioc_qbuf(struct file *filp, if (buf->memory != V4L2_MEMORY_MMAP) return -EINVAL; - if (buf->index < 0 || buf->index >= dev->n_sbufs) + if (buf->index >= dev->n_sbufs) return -EINVAL; sbuf = dev->sio_bufs + buf->index; if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) diff --git a/linux/drivers/media/video/usbvision/usbvision-video.c b/linux/drivers/media/video/usbvision/usbvision-video.c index d7056a5b7..d03e5922d 100644 --- a/linux/drivers/media/video/usbvision/usbvision-video.c +++ b/linux/drivers/media/video/usbvision/usbvision-video.c @@ -541,7 +541,7 @@ static int vidioc_enum_input (struct file *file, void *priv, struct usb_usbvision *usbvision = video_drvdata(file); int chan; - if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) ) + if (vi->index >= usbvision->video_inputs) return -EINVAL; if (usbvision->have_tuner) { chan = vi->index; diff --git a/linux/drivers/media/video/videobuf-core.c b/linux/drivers/media/video/videobuf-core.c index 972f09836..e9696385d 100644 --- a/linux/drivers/media/video/videobuf-core.c +++ b/linux/drivers/media/video/videobuf-core.c @@ -456,7 +456,7 @@ int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b) dprintk(1, "querybuf: Wrong type.\n"); goto done; } - if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) { + if (unlikely(b->index >= VIDEO_MAX_FRAME)) { dprintk(1, "querybuf: index out of range.\n"); goto done; } @@ -497,7 +497,7 @@ int videobuf_qbuf(struct videobuf_queue *q, dprintk(1, "qbuf: Wrong type.\n"); goto done; } - if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) { + if (b->index >= VIDEO_MAX_FRAME) { dprintk(1, "qbuf: index out of range.\n"); goto done; } -- cgit v1.2.3 From 92d86489f12a97b91898eaffecc71667b5c1c58f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 2 May 2009 20:52:52 +0000 Subject: zoran: Fix &&/|| typo From: Roel Kluin Fix &&/|| typo Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/zoran/zoran_card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/zoran/zoran_card.c b/linux/drivers/media/video/zoran/zoran_card.c index 733db7690..67ab10878 100644 --- a/linux/drivers/media/video/zoran/zoran_card.c +++ b/linux/drivers/media/video/zoran/zoran_card.c @@ -1023,7 +1023,7 @@ zr36057_init (struct zoran *zr) zr->vbuf_bytesperline = 0; /* Avoid nonsense settings from user for default input/norm */ - if (default_norm < 0 && default_norm > 2) + if (default_norm < 0 || default_norm > 2) default_norm = 0; if (default_norm == 0) { zr->norm = V4L2_STD_PAL; -- cgit v1.2.3 From add6db3f5ca3f7cf4e3a0fd1f2c347319537e10a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 3 May 2009 22:27:02 -0400 Subject: cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1270 From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-cards.c | 1 + linux/drivers/media/video/cx23885/cx23885-dvb.c | 34 +++++++++++++++++++++++ 2 files changed, 35 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index bd608b4a0..299182227 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -184,6 +184,7 @@ struct cx23885_board cx23885_boards[] = { }, [CX23885_BOARD_HAUPPAUGE_HVR1270] = { .name = "Hauppauge WinTV-HVR1270", + .portc = CX23885_MPEG_DVB, }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index eb3293789..b60f68a6d 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -52,6 +52,7 @@ #include "cimax2.h" #include "netup-eeprom.h" #include "netup-init.h" +#include "lgdt3305.h" static unsigned int debug; @@ -227,6 +228,28 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = { .gate = TDA18271_GATE_ANALOG, }; +static struct tda18271_std_map hcw_lgdt3305_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x58 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x58 }, +}; + +static struct tda18271_config hcw_lgdt3305_tda18271_config = { + .std_map = &hcw_lgdt3305_tda18271_std_map, +}; + +static struct lgdt3305_config hcw_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 1, + .qam_if_khz = 4000, + .vsb_if_khz = 3250, +}; + static struct dibx000_agc_config xc3028_agc_config = { BAND_VHF | BAND_UHF, /* band_caps */ @@ -399,6 +422,17 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_generic_tunerconfig, 0); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt3305_attach, + &hcw_lgdt3305_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hcw_lgdt3305_tda18271_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: i2c_bus = &dev->i2c_bus[0]; switch (alt_tuner) { -- cgit v1.2.3 From 56094f2f714025a756faf2acd42500698dacb100 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 6 May 2009 17:30:30 +0200 Subject: uvcvideo: Parse frame descriptors with non-continuous indexes. From: Laurent Pinchart The UVC specification requires frame descriptors indexes to range from 1 to the number of frame descriptors. At least some Hercules Dualpix Infinite webcams erroneously use non-continuous index ranges. Make the driver support them. Priority: normal Signed-off-by: Laurent Pinchart --- linux/drivers/media/video/uvc/uvc_driver.c | 24 ++---------------------- linux/drivers/media/video/uvc/uvc_video.c | 17 +++++++++++------ 2 files changed, 13 insertions(+), 28 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 31d60647d..94bb63ef1 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -289,10 +289,8 @@ static int uvc_parse_format(struct uvc_device *dev, struct uvc_format_desc *fmtdesc; struct uvc_frame *frame; const unsigned char *start = buffer; - unsigned char *_buffer; unsigned int interval; unsigned int i, n; - int _buflen; __u8 ftype; format->type = buffer[2]; @@ -413,20 +411,11 @@ static int uvc_parse_format(struct uvc_device *dev, buflen -= buffer[0]; buffer += buffer[0]; - /* Count the number of frame descriptors to test the bFrameIndex - * field when parsing the descriptors. We can't rely on the - * bNumFrameDescriptors field as some cameras don't initialize it - * properly. - */ - for (_buflen = buflen, _buffer = buffer; - _buflen > 2 && _buffer[2] == ftype; - _buflen -= _buffer[0], _buffer += _buffer[0]) - format->nframes++; - /* Parse the frame descriptors. Only uncompressed, MJPEG and frame * based formats have frame descriptors. */ while (buflen > 2 && buffer[2] == ftype) { + frame = &format->frame[format->nframes]; if (ftype != VS_FRAME_FRAME_BASED) n = buflen > 25 ? buffer[25] : 0; else @@ -441,16 +430,6 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; } - if (buffer[3] - 1 >= format->nframes) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" - "interface %d frame index %u out of range\n", - dev->udev->devnum, alts->desc.bInterfaceNumber, - buffer[3]); - return -EINVAL; - } - - frame = &format->frame[buffer[3] - 1]; - frame->bFrameIndex = buffer[3]; frame->bmCapabilities = buffer[4]; frame->wWidth = get_unaligned_le16(&buffer[5]); @@ -507,6 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev, 10000000/frame->dwDefaultFrameInterval, (100000000/frame->dwDefaultFrameInterval)%10); + format->nframes++; buflen -= buffer[0]; buffer += buffer[0]; } diff --git a/linux/drivers/media/video/uvc/uvc_video.c b/linux/drivers/media/video/uvc/uvc_video.c index c5df33de9..07e755ba7 100644 --- a/linux/drivers/media/video/uvc/uvc_video.c +++ b/linux/drivers/media/video/uvc/uvc_video.c @@ -65,7 +65,8 @@ static void uvc_fixup_video_ctrl(struct uvc_video_device *video, struct uvc_streaming_control *ctrl) { struct uvc_format *format; - struct uvc_frame *frame; + struct uvc_frame *frame = NULL; + unsigned int i; if (ctrl->bFormatIndex <= 0 || ctrl->bFormatIndex > video->streaming->nformats) @@ -73,11 +74,15 @@ static void uvc_fixup_video_ctrl(struct uvc_video_device *video, format = &video->streaming->format[ctrl->bFormatIndex - 1]; - if (ctrl->bFrameIndex <= 0 || - ctrl->bFrameIndex > format->nframes) - return; + for (i = 0; i < format->nframes; ++i) { + if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) { + frame = &format->frame[i]; + break; + } + } - frame = &format->frame[ctrl->bFrameIndex - 1]; + if (frame == NULL) + return; if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || (ctrl->dwMaxVideoFrameSize == 0 && @@ -1093,7 +1098,7 @@ int uvc_video_init(struct uvc_video_device *video) /* Zero bFrameIndex might be correct. Stream-based formats (including * MPEG-2 TS and DV) do not support frames but have a dummy frame * descriptor with bFrameIndex set to zero. If the default frame - * descriptor is not found, use the first avalable frame. + * descriptor is not found, use the first available frame. */ for (i = format->nframes; i > 0; --i) { frame = &format->frame[i-1]; -- cgit v1.2.3 From b872a134312bd4a2a97b537ab0b547a021d594df Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 6 May 2009 17:37:44 +0200 Subject: uvcvideo: Add missing whitespaces to multi-line format strings. From: Laurent Pinchart Priority: normal Signed-off-by: Laurent Pinchart --- linux/drivers/media/video/uvc/uvc_driver.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 94bb63ef1..1768389c4 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -301,7 +301,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_FRAME_BASED: n = buffer[2] == VS_FORMAT_UNCOMPRESSED ? 27 : 28; if (buflen < n) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -336,7 +336,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_MJPEG: if (buflen < 11) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -352,7 +352,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_DV: if (buflen < 9) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -370,7 +370,7 @@ static int uvc_parse_format(struct uvc_device *dev, strlcpy(format->name, "HD-DV", sizeof format->name); break; default: - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d: unknown DV format %u\n", dev->udev->devnum, alts->desc.bInterfaceNumber, buffer[8]); @@ -399,7 +399,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_STREAM_BASED: /* Not supported yet. */ default: - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d unsupported format %u\n", dev->udev->devnum, alts->desc.bInterfaceNumber, buffer[2]); @@ -424,7 +424,7 @@ static int uvc_parse_format(struct uvc_device *dev, n = n ? n : 3; if (buflen < 26 + 4*n) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FRAME error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); return -EINVAL; @@ -498,7 +498,7 @@ static int uvc_parse_format(struct uvc_device *dev, if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { if (buflen < 6) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d COLORFORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -1296,7 +1296,7 @@ static int uvc_scan_chain_forward(struct uvc_video_device *video, continue; if (forward->extension.bNrInPins != 1) { - uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has" + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has " "more than 1 input pin.\n", entity->id); return -1; } -- cgit v1.2.3 From a46ec326b79a229fdb0205fa793525ba8d234907 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 6 May 2009 19:54:00 -0400 Subject: au0828: send command to power down tuner when done with analog From: Devin Heitmueller Make sure the au0828 issues the command to power down the tuner when the user is done using analog support. Priority: normal Signed-off-by: Devin Heitmueller --- linux/drivers/media/video/au0828/au0828-video.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/au0828/au0828-video.c b/linux/drivers/media/video/au0828/au0828-video.c index 8bc0f0481..f73212415 100644 --- a/linux/drivers/media/video/au0828/au0828-video.c +++ b/linux/drivers/media/video/au0828/au0828-video.c @@ -834,6 +834,9 @@ static int au0828_v4l2_close(struct file *filp) au0828_uninit_isoc(dev); + /* Save some power by putting tuner to sleep */ + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby); + /* When close the device, set the usb intf0 into alt0 to free USB bandwidth */ ret = usb_set_interface(dev->usbdev, 0, 0); -- cgit v1.2.3 From e35d2b660b1c4e14bbf10d6158278f39444635ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 7 May 2009 12:29:25 +0000 Subject: TI THS7303 video amplifier driver code From: Chaithrika U S This patch adds driver for TI THS7303 video amplifier. This driver is implemented as a v4l2 sub device. Tested on TI DM646x EVM. This version has updates based on review comments by Mauro Chehab. Signed-off-by: Chaithrika U S Reviewed-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/Kconfig | 9 +++ linux/drivers/media/video/Makefile | 1 + linux/drivers/media/video/ths7303.c | 151 ++++++++++++++++++++++++++++++++++++ 3 files changed, 161 insertions(+) create mode 100644 linux/drivers/media/video/ths7303.c (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 9d48da2fb..f99348cc3 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -440,6 +440,15 @@ config VIDEO_ADV7175 To compile this driver as a module, choose M here: the module will be called adv7175. +config VIDEO_THS7303 + tristate "THS7303 Video Amplifier" + depends on I2C + help + Support for TI THS7303 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + comment "Video improvement chips" config VIDEO_UPD64031A diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 7aefac643..352dd6d32 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_VIDEO_BT819) += bt819.o obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o obj-$(CONFIG_VIDEO_KS0127) += ks0127.o +obj-$(CONFIG_VIDEO_THS7303) += ths7303.o obj-$(CONFIG_VIDEO_ZORAN) += zoran/ diff --git a/linux/drivers/media/video/ths7303.c b/linux/drivers/media/video/ths7303.c new file mode 100644 index 000000000..21781f8a0 --- /dev/null +++ b/linux/drivers/media/video/ths7303.c @@ -0,0 +1,151 @@ +/* + * ths7303- THS7303 Video Amplifier driver + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +MODULE_DESCRIPTION("TI THS7303 video amplifier driver"); +MODULE_AUTHOR("Chaithrika U S"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +/* following function is used to set ths7303 */ +static int ths7303_setvalue(struct v4l2_subdev *sd, v4l2_std_id std) +{ + int err = 0; + u8 val; + struct i2c_client *client; + + client = v4l2_get_subdevdata(sd); + + if (std & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) { + val = 0x02; + v4l2_dbg(1, debug, sd, "setting value for SDTV format\n"); + } else { + val = 0x00; + v4l2_dbg(1, debug, sd, "disabling all channels\n"); + } + + err |= i2c_smbus_write_byte_data(client, 0x01, val); + err |= i2c_smbus_write_byte_data(client, 0x02, val); + err |= i2c_smbus_write_byte_data(client, 0x03, val); + + if (err) + v4l2_err(sd, "write failed\n"); + + return err; +} + +static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + return ths7303_setvalue(sd, norm); +} + +static int ths7303_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_THS7303, 0); +} + +static const struct v4l2_subdev_video_ops ths7303_video_ops = { + .s_std_output = ths7303_s_std_output, +}; + +static const struct v4l2_subdev_core_ops ths7303_core_ops = { + .g_chip_ident = ths7303_g_chip_ident, +}; + +static const struct v4l2_subdev_ops ths7303_ops = { + .core = &ths7303_core_ops, + .video = &ths7303_video_ops, +}; + +static int ths7303_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + v4l2_std_id std_id = V4L2_STD_NTSC; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + + v4l2_i2c_subdev_init(sd, client, &ths7303_ops); + + return ths7303_setvalue(sd, std_id); +} + +static int ths7303_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + + return 0; +} + +static const struct i2c_device_id ths7303_id[] = { + {"ths7303", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, ths7303_id); + +static struct i2c_driver ths7303_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ths7303", + }, + .probe = ths7303_probe, + .remove = ths7303_remove, + .id_table = ths7303_id, +}; + +static int __init ths7303_init(void) +{ + return i2c_add_driver(&ths7303_driver); +} + +static void __exit ths7303_exit(void) +{ + i2c_del_driver(&ths7303_driver); +} + +module_init(ths7303_init); +module_exit(ths7303_exit); + -- cgit v1.2.3 From 3349bdfa71ab601e2ad2fe785485cb8fe455248b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 7 May 2009 12:30:01 +0000 Subject: Analog Devices ADV7343 video encoder driver From: Chaithrika U S Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It has been tested for Composite and Component outputs. Updates as per review by Mauro Chehab, added support for more standards supported by the encoder. Also adding the missed out signed-offs.Tested only NTSC and PAL standards. Signed-off-by: Manjunath Hadli Signed-off-by: Brijesh Jadav Signed-off-by: Chaithrika U S [hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API] Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/Kconfig | 9 + linux/drivers/media/video/Makefile | 1 + linux/drivers/media/video/adv7343.c | 534 +++++++++++++++++++++++++++++++ linux/drivers/media/video/adv7343_regs.h | 185 +++++++++++ 4 files changed, 729 insertions(+) create mode 100644 linux/drivers/media/video/adv7343.c create mode 100644 linux/drivers/media/video/adv7343_regs.h (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index f99348cc3..7a1f43d17 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -449,6 +449,15 @@ config VIDEO_THS7303 To compile this driver as a module, choose M here: the module will be called ths7303. +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + comment "Video improvement chips" config VIDEO_UPD64031A diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 352dd6d32..f7d9a4c6f 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o +obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o obj-$(CONFIG_VIDEO_BT819) += bt819.o obj-$(CONFIG_VIDEO_BT856) += bt856.o diff --git a/linux/drivers/media/video/adv7343.c b/linux/drivers/media/video/adv7343.c new file mode 100644 index 000000000..30f5caf5d --- /dev/null +++ b/linux/drivers/media/video/adv7343.c @@ -0,0 +1,534 @@ +/* + * adv7343 - ADV7343 Video Encoder Driver + * + * The encoder hardware does not support SECAM. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "adv7343_regs.h" + +MODULE_DESCRIPTION("ADV7343 video encoder driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +struct adv7343_state { + struct v4l2_subdev sd; + u8 reg00; + u8 reg01; + u8 reg02; + u8 reg35; + u8 reg80; + u8 reg82; + int bright; + int hue; + int gain; + u32 output; + v4l2_std_id std; +}; + +static inline struct adv7343_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7343_state, sd); +} + +static inline int adv7343_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static const u8 adv7343_init_reg_val[] = { + ADV7343_SOFT_RESET, ADV7343_SOFT_RESET_DEFAULT, + ADV7343_POWER_MODE_REG, ADV7343_POWER_MODE_REG_DEFAULT, + + ADV7343_HD_MODE_REG1, ADV7343_HD_MODE_REG1_DEFAULT, + ADV7343_HD_MODE_REG2, ADV7343_HD_MODE_REG2_DEFAULT, + ADV7343_HD_MODE_REG3, ADV7343_HD_MODE_REG3_DEFAULT, + ADV7343_HD_MODE_REG4, ADV7343_HD_MODE_REG4_DEFAULT, + ADV7343_HD_MODE_REG5, ADV7343_HD_MODE_REG5_DEFAULT, + ADV7343_HD_MODE_REG6, ADV7343_HD_MODE_REG6_DEFAULT, + ADV7343_HD_MODE_REG7, ADV7343_HD_MODE_REG7_DEFAULT, + + ADV7343_SD_MODE_REG1, ADV7343_SD_MODE_REG1_DEFAULT, + ADV7343_SD_MODE_REG2, ADV7343_SD_MODE_REG2_DEFAULT, + ADV7343_SD_MODE_REG3, ADV7343_SD_MODE_REG3_DEFAULT, + ADV7343_SD_MODE_REG4, ADV7343_SD_MODE_REG4_DEFAULT, + ADV7343_SD_MODE_REG5, ADV7343_SD_MODE_REG5_DEFAULT, + ADV7343_SD_MODE_REG6, ADV7343_SD_MODE_REG6_DEFAULT, + ADV7343_SD_MODE_REG7, ADV7343_SD_MODE_REG7_DEFAULT, + ADV7343_SD_MODE_REG8, ADV7343_SD_MODE_REG8_DEFAULT, + + ADV7343_SD_HUE_REG, ADV7343_SD_HUE_REG_DEFAULT, + ADV7343_SD_CGMS_WSS0, ADV7343_SD_CGMS_WSS0_DEFAULT, + ADV7343_SD_BRIGHTNESS_WSS, ADV7343_SD_BRIGHTNESS_WSS_DEFAULT, +}; + +/* + * 2^32 + * FSC(reg) = FSC (HZ) * -------- + * 27000000 + */ +static const struct adv7343_std_info stdinfo[] = { + { + /* FSC(Hz) = 3,579,545.45 Hz */ + SD_STD_NTSC, 569408542, V4L2_STD_NTSC, + }, { + /* FSC(Hz) = 3,575,611.00 Hz */ + SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M, + }, { + /* FSC(Hz) = 3,582,056.00 */ + SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60, + }, +}; + +static int adv7343_setstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7343_state *state = to_state(sd); + struct adv7343_std_info *std_info; + int output_idx, num_std; + char *fsc_ptr; + u8 reg, val; + int err = 0; + int i = 0; + + output_idx = state->output; + + std_info = (struct adv7343_std_info *)stdinfo; + num_std = ARRAY_SIZE(stdinfo); + + for (i = 0; i < num_std; i++) { + if (std_info[i].stdid & std) + break; + } + + if (i == num_std) { + v4l2_dbg(1, debug, sd, + "Invalid std or std is not supported: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + + /* Set the standard */ + val = state->reg80 & (~(SD_STD_MASK)); + val |= std_info[i].standard_val3; + err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + + /* Configure the input mode register */ + val = state->reg01 & (~((u8) INPUT_MODE_MASK)); + val |= SD_INPUT_MODE; + err = adv7343_write(sd, ADV7343_MODE_SELECT_REG, val); + if (err < 0) + goto setstd_exit; + + state->reg01 = val; + + /* Program the sub carrier frequency registers */ + fsc_ptr = (unsigned char *)&std_info[i].fsc_val; + reg = ADV7343_FSC_REG0; + for (i = 0; i < 4; i++, reg++, fsc_ptr++) { + err = adv7343_write(sd, reg, *fsc_ptr); + if (err < 0) + goto setstd_exit; + } + + val = state->reg80; + + /* Filter settings */ + if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443)) + val &= 0x03; + else if (std & ~V4L2_STD_SECAM) + val |= 0x04; + + err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + +setstd_exit: + if (err != 0) + v4l2_err(sd, "Error setting std, write failed\n"); + + return err; +} + +static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type) +{ + struct adv7343_state *state = to_state(sd); + unsigned char val; + int err = 0; + + if (output_type > ADV7343_SVIDEO_ID) { + v4l2_dbg(1, debug, sd, + "Invalid output type or output type not supported:%d\n", + output_type); + return -EINVAL; + } + + /* Enable Appropriate DAC */ + val = state->reg00 & 0x03; + + if (output_type == ADV7343_COMPOSITE_ID) + val |= ADV7343_COMPOSITE_POWER_VALUE; + else if (output_type == ADV7343_COMPONENT_ID) + val |= ADV7343_COMPONENT_POWER_VALUE; + else + val |= ADV7343_SVIDEO_POWER_VALUE; + + err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val); + if (err < 0) + goto setoutput_exit; + + state->reg00 = val; + + /* Enable YUV output */ + val = state->reg02 | YUV_OUTPUT_SELECT; + err = adv7343_write(sd, ADV7343_MODE_REG0, val); + if (err < 0) + goto setoutput_exit; + + state->reg02 = val; + + /* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */ + val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI); + err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val); + if (err < 0) + goto setoutput_exit; + + state->reg82 = val; + + /* configure ED/HD Color DAC Swap and ED/HD RGB Input Enable bit to + * zero */ + val = state->reg35 & (HD_RGB_INPUT_DI & HD_DAC_SWAP_DI); + err = adv7343_write(sd, ADV7343_HD_MODE_REG6, val); + if (err < 0) + goto setoutput_exit; + + state->reg35 = val; + +setoutput_exit: + if (err != 0) + v4l2_err(sd, "Error setting output, write failed\n"); + + return err; +} + +static int adv7343_log_status(struct v4l2_subdev *sd) +{ + struct adv7343_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std); + v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" : + ((state->output == 1) ? "Component" : "S-Video")); + return 0; +} + +static int adv7343_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) +{ + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, ADV7343_BRIGHTNESS_MIN, + ADV7343_BRIGHTNESS_MAX, 1, + ADV7343_BRIGHTNESS_DEF); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, ADV7343_HUE_MIN, + ADV7343_HUE_MAX, 1 , + ADV7343_HUE_DEF); + case V4L2_CID_GAIN: + return v4l2_ctrl_query_fill(qc, ADV7343_GAIN_MIN, + ADV7343_GAIN_MAX, 1, + ADV7343_GAIN_DEF); + default: + break; + } + + return 0; +} + +static int adv7343_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (ctrl->value < ADV7343_BRIGHTNESS_MIN || + ctrl->value > ADV7343_BRIGHTNESS_MAX) { + v4l2_dbg(1, debug, sd, + "invalid brightness settings %d\n", + ctrl->value); + return -ERANGE; + } + + state->bright = ctrl->value; + err = adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS, + state->bright); + break; + + case V4L2_CID_HUE: + if (ctrl->value < ADV7343_HUE_MIN || + ctrl->value > ADV7343_HUE_MAX) { + v4l2_dbg(1, debug, sd, "invalid hue settings %d\n", + ctrl->value); + return -ERANGE; + } + + state->hue = ctrl->value; + err = adv7343_write(sd, ADV7343_SD_HUE_REG, state->hue); + break; + + case V4L2_CID_GAIN: + if (ctrl->value < ADV7343_GAIN_MIN || + ctrl->value > ADV7343_GAIN_MAX) { + v4l2_dbg(1, debug, sd, "invalid gain settings %d\n", + ctrl->value); + return -ERANGE; + } + + if ((ctrl->value > POSITIVE_GAIN_MAX) && + (ctrl->value < NEGATIVE_GAIN_MIN)) { + v4l2_dbg(1, debug, sd, + "gain settings not within the specified range\n"); + return -ERANGE; + } + + state->gain = ctrl->value; + err = adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, state->gain); + break; + + default: + return -EINVAL; + } + + if (err < 0) + v4l2_err(sd, "Failed to set the encoder controls\n"); + + return err; +} + +static int adv7343_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct adv7343_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = state->bright; + break; + + case V4L2_CID_HUE: + ctrl->value = state->hue; + break; + + case V4L2_CID_GAIN: + ctrl->value = state->gain; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int adv7343_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7343, 0); +} + +static const struct v4l2_subdev_core_ops adv7343_core_ops = { + .log_status = adv7343_log_status, + .g_chip_ident = adv7343_g_chip_ident, + .g_ctrl = adv7343_g_ctrl, + .s_ctrl = adv7343_s_ctrl, + .queryctrl = adv7343_queryctrl, +}; + +static int adv7343_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + if (state->std == std) + return 0; + + err = adv7343_setstd(sd, std); + if (!err) + state->std = std; + + return err; +} + +static int adv7343_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + if (state->output == output) + return 0; + + err = adv7343_setoutput(sd, output); + if (!err) + state->output = output; + + return err; +} + +static const struct v4l2_subdev_video_ops adv7343_video_ops = { + .s_std_output = adv7343_s_std_output, + .s_routing = adv7343_s_routing, +}; + +static const struct v4l2_subdev_ops adv7343_ops = { + .core = &adv7343_core_ops, + .video = &adv7343_video_ops, +}; + +static int adv7343_initialize(struct v4l2_subdev *sd) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(adv7343_init_reg_val); i += 2) { + + err = adv7343_write(sd, adv7343_init_reg_val[i], + adv7343_init_reg_val[i+1]); + if (err) { + v4l2_err(sd, "Error initializing\n"); + return err; + } + } + + /* Configure for default video standard */ + err = adv7343_setoutput(sd, state->output); + if (err < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + err = adv7343_setstd(sd, state->std); + if (err < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return err; +} + +static int adv7343_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7343_state *state; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct adv7343_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + state->reg00 = 0x80; + state->reg01 = 0x00; + state->reg02 = 0x20; + state->reg35 = 0x00; + state->reg80 = ADV7343_SD_MODE_REG1_DEFAULT; + state->reg82 = ADV7343_SD_MODE_REG2_DEFAULT; + + state->output = ADV7343_COMPOSITE_ID; + state->std = V4L2_STD_NTSC; + + v4l2_i2c_subdev_init(&state->sd, client, &adv7343_ops); + return adv7343_initialize(&state->sd); +} + +static int adv7343_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + + return 0; +} + +static const struct i2c_device_id adv7343_id[] = { + {"adv7343", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7343_id); + +static struct i2c_driver adv7343_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7343", + }, + .probe = adv7343_probe, + .remove = adv7343_remove, + .id_table = adv7343_id, +}; + +static __init int init_adv7343(void) +{ + return i2c_add_driver(&adv7343_driver); +} + +static __exit void exit_adv7343(void) +{ + i2c_del_driver(&adv7343_driver); +} + +module_init(init_adv7343); +module_exit(exit_adv7343); diff --git a/linux/drivers/media/video/adv7343_regs.h b/linux/drivers/media/video/adv7343_regs.h new file mode 100644 index 000000000..3431045b3 --- /dev/null +++ b/linux/drivers/media/video/adv7343_regs.h @@ -0,0 +1,185 @@ +/* + * ADV7343 encoder related structure and register definitions + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7343_REG_H +#define ADV7343_REGS_H + +struct adv7343_std_info { + u32 standard_val3; + u32 fsc_val; + v4l2_std_id stdid; +}; + +/* Register offset macros */ +#define ADV7343_POWER_MODE_REG (0x00) +#define ADV7343_MODE_SELECT_REG (0x01) +#define ADV7343_MODE_REG0 (0x02) + +#define ADV7343_DAC2_OUTPUT_LEVEL (0x0b) + +#define ADV7343_SOFT_RESET (0x17) + +#define ADV7343_HD_MODE_REG1 (0x30) +#define ADV7343_HD_MODE_REG2 (0x31) +#define ADV7343_HD_MODE_REG3 (0x32) +#define ADV7343_HD_MODE_REG4 (0x33) +#define ADV7343_HD_MODE_REG5 (0x34) +#define ADV7343_HD_MODE_REG6 (0x35) + +#define ADV7343_HD_MODE_REG7 (0x39) + +#define ADV7343_SD_MODE_REG1 (0x80) +#define ADV7343_SD_MODE_REG2 (0x82) +#define ADV7343_SD_MODE_REG3 (0x83) +#define ADV7343_SD_MODE_REG4 (0x84) +#define ADV7343_SD_MODE_REG5 (0x86) +#define ADV7343_SD_MODE_REG6 (0x87) +#define ADV7343_SD_MODE_REG7 (0x88) +#define ADV7343_SD_MODE_REG8 (0x89) + +#define ADV7343_FSC_REG0 (0x8C) +#define ADV7343_FSC_REG1 (0x8D) +#define ADV7343_FSC_REG2 (0x8E) +#define ADV7343_FSC_REG3 (0x8F) + +#define ADV7343_SD_CGMS_WSS0 (0x99) + +#define ADV7343_SD_HUE_REG (0xA0) +#define ADV7343_SD_BRIGHTNESS_WSS (0xA1) + +/* Default values for the registers */ +#define ADV7343_POWER_MODE_REG_DEFAULT (0x10) +#define ADV7343_HD_MODE_REG1_DEFAULT (0x3C) /* Changed Default + 720p EAVSAV code*/ +#define ADV7343_HD_MODE_REG2_DEFAULT (0x01) /* Changed Pixel data + valid */ +#define ADV7343_HD_MODE_REG3_DEFAULT (0x00) /* Color delay 0 clks */ +#define ADV7343_HD_MODE_REG4_DEFAULT (0xE8) /* Changed */ +#define ADV7343_HD_MODE_REG5_DEFAULT (0x08) +#define ADV7343_HD_MODE_REG6_DEFAULT (0x00) +#define ADV7343_HD_MODE_REG7_DEFAULT (0x00) +#define ADV7343_SD_MODE_REG8_DEFAULT (0x00) +#define ADV7343_SOFT_RESET_DEFAULT (0x02) +#define ADV7343_COMPOSITE_POWER_VALUE (0x80) +#define ADV7343_COMPONENT_POWER_VALUE (0x1C) +#define ADV7343_SVIDEO_POWER_VALUE (0x60) +#define ADV7343_SD_HUE_REG_DEFAULT (127) +#define ADV7343_SD_BRIGHTNESS_WSS_DEFAULT (0x03) + +#define ADV7343_SD_CGMS_WSS0_DEFAULT (0x10) + +#define ADV7343_SD_MODE_REG1_DEFAULT (0x00) +#define ADV7343_SD_MODE_REG2_DEFAULT (0xC9) +#define ADV7343_SD_MODE_REG3_DEFAULT (0x10) +#define ADV7343_SD_MODE_REG4_DEFAULT (0x01) +#define ADV7343_SD_MODE_REG5_DEFAULT (0x02) +#define ADV7343_SD_MODE_REG6_DEFAULT (0x0C) +#define ADV7343_SD_MODE_REG7_DEFAULT (0x04) +#define ADV7343_SD_MODE_REG8_DEFAULT (0x00) + +/* Bit masks for Mode Select Register */ +#define INPUT_MODE_MASK (0x70) +#define SD_INPUT_MODE (0x00) +#define HD_720P_INPUT_MODE (0x10) +#define HD_1080I_INPUT_MODE (0x10) + +/* Bit masks for Mode Register 0 */ +#define TEST_PATTERN_BLACK_BAR_EN (0x04) +#define YUV_OUTPUT_SELECT (0x20) +#define RGB_OUTPUT_SELECT (0xDF) + +/* Bit masks for DAC output levels */ +#define DAC_OUTPUT_LEVEL_MASK (0xFF) +#define POSITIVE_GAIN_MAX (0x40) +#define POSITIVE_GAIN_MIN (0x00) +#define NEGATIVE_GAIN_MAX (0xFF) +#define NEGATIVE_GAIN_MIN (0xC0) + +/* Bit masks for soft reset register */ +#define SOFT_RESET (0x02) + +/* Bit masks for HD Mode Register 1 */ +#define OUTPUT_STD_MASK (0x03) +#define OUTPUT_STD_SHIFT (0) +#define OUTPUT_STD_EIA0_2 (0x00) +#define OUTPUT_STD_EIA0_1 (0x01) +#define OUTPUT_STD_FULL (0x02) +#define EMBEDDED_SYNC (0x04) +#define EXTERNAL_SYNC (0xFB) +#define STD_MODE_SHIFT (3) +#define STD_MODE_MASK (0x1F) +#define STD_MODE_720P (0x05) +#define STD_MODE_720P_25 (0x08) +#define STD_MODE_720P_30 (0x07) +#define STD_MODE_720P_50 (0x06) +#define STD_MODE_1080I (0x0D) +#define STD_MODE_1080I_25fps (0x0E) +#define STD_MODE_1080P_24 (0x12) +#define STD_MODE_1080P_25 (0x10) +#define STD_MODE_1080P_30 (0x0F) +#define STD_MODE_525P (0x00) +#define STD_MODE_625P (0x03) + +/* Bit masks for SD Mode Register 1 */ +#define SD_STD_MASK (0x03) +#define SD_STD_NTSC (0x00) +#define SD_STD_PAL_BDGHI (0x01) +#define SD_STD_PAL_M (0x02) +#define SD_STD_PAL_N (0x03) +#define SD_LUMA_FLTR_MASK (0x7) +#define SD_LUMA_FLTR_SHIFT (0x2) +#define SD_CHROMA_FLTR_MASK (0x7) +#define SD_CHROMA_FLTR_SHIFT (0x5) + +/* Bit masks for SD Mode Register 2 */ +#define SD_PBPR_SSAF_EN (0x01) +#define SD_PBPR_SSAF_DI (0xFE) +#define SD_DAC_1_DI (0xFD) +#define SD_DAC_2_DI (0xFB) +#define SD_PEDESTAL_EN (0x08) +#define SD_PEDESTAL_DI (0xF7) +#define SD_SQUARE_PIXEL_EN (0x10) +#define SD_SQUARE_PIXEL_DI (0xEF) +#define SD_PIXEL_DATA_VALID (0x40) +#define SD_ACTIVE_EDGE_EN (0x80) +#define SD_ACTIVE_EDGE_DI (0x7F) + +/* Bit masks for HD Mode Register 6 */ +#define HD_RGB_INPUT_EN (0x02) +#define HD_RGB_INPUT_DI (0xFD) +#define HD_PBPR_SYNC_EN (0x04) +#define HD_PBPR_SYNC_DI (0xFB) +#define HD_DAC_SWAP_EN (0x08) +#define HD_DAC_SWAP_DI (0xF7) +#define HD_GAMMA_CURVE_A (0xEF) +#define HD_GAMMA_CURVE_B (0x10) +#define HD_GAMMA_EN (0x20) +#define HD_GAMMA_DI (0xDF) +#define HD_ADPT_FLTR_MODEB (0x40) +#define HD_ADPT_FLTR_MODEA (0xBF) +#define HD_ADPT_FLTR_EN (0x80) +#define HD_ADPT_FLTR_DI (0x7F) + +#define ADV7343_BRIGHTNESS_MAX (127) +#define ADV7343_BRIGHTNESS_MIN (0) +#define ADV7343_BRIGHTNESS_DEF (3) +#define ADV7343_HUE_MAX (255) +#define ADV7343_HUE_MIN (0) +#define ADV7343_HUE_DEF (127) +#define ADV7343_GAIN_MAX (255) +#define ADV7343_GAIN_MIN (0) +#define ADV7343_GAIN_DEF (0) + +#endif -- cgit v1.2.3 From 8220eb0d3b9e4da0f7f057b1c80fd7e1b15e3151 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 8 May 2009 21:39:24 -0400 Subject: cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1275 From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-cards.c | 17 +++++++++++++++-- linux/drivers/media/video/cx23885/cx23885-dvb.c | 1 + linux/drivers/media/video/cx23885/cx23885.h | 1 + 3 files changed, 17 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 299182227..45b2856c9 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -186,6 +186,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1270", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1275] = { + .name = "Hauppauge WinTV-HVR1275", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -289,6 +293,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x2211, .card = CX23885_BOARD_HAUPPAUGE_HVR1270, + }, { + .subvendor = 0x0070, + .subdevice = 0x2215, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -629,12 +637,14 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ break; case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ /* GPIO-6 I2C Gate which can isolate the 3305 from the bus */ /* GPIO-9 LG3305 reset */ /* Put the parts into reset and back */ - cx23885_gpio_enable(dev, GPIO_9 | GPIO_6, 1); - cx23885_gpio_set(dev, GPIO_9 | GPIO_6); + cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1); + cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5); cx23885_gpio_clear(dev, GPIO_9); mdelay(20); cx23885_gpio_set(dev, GPIO_9); @@ -652,6 +662,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: /* FIXME: Implement me */ break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: @@ -688,6 +699,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -746,6 +758,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index b60f68a6d..6f9a5f72c 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -423,6 +423,7 @@ static int dvb_register(struct cx23885_tsport *port) } break; case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(lgdt3305_attach, &hcw_lgdt3305_config, diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 21d886212..645333922 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -73,6 +73,7 @@ #define CX23885_BOARD_DVBWORLD_2005 16 #define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 #define CX23885_BOARD_HAUPPAUGE_HVR1270 18 +#define CX23885_BOARD_HAUPPAUGE_HVR1275 19 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3 From fa2725b25f78c7b35f5c9c2a5087612a6c009bb9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 8 May 2009 15:05:29 -0400 Subject: cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1255 From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-cards.c | 12 ++++++++++++ linux/drivers/media/video/cx23885/cx23885-dvb.c | 21 +++++++++++++++++++++ linux/drivers/media/video/cx23885/cx23885.h | 1 + 3 files changed, 34 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 45b2856c9..2d398f755 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -190,6 +190,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1275", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1255] = { + .name = "Hauppauge WinTV-HVR1255", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -297,6 +301,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x2215, .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x2251, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -638,6 +646,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) break; case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ /* GPIO-6 I2C Gate which can isolate the 3305 from the bus */ /* GPIO-9 LG3305 reset */ @@ -663,6 +672,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: /* FIXME: Implement me */ break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: @@ -700,6 +710,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -759,6 +770,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 6f9a5f72c..c671d8e46 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -198,6 +198,16 @@ static struct s5h1411_config dvico_s5h1411_config = { .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, @@ -434,6 +444,17 @@ static int dvb_register(struct cx23885_tsport *port) &hcw_lgdt3305_tda18271_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1255: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: i2c_bus = &dev->i2c_bus[0]; switch (alt_tuner) { diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 645333922..947ade659 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -74,6 +74,7 @@ #define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 #define CX23885_BOARD_HAUPPAUGE_HVR1270 18 #define CX23885_BOARD_HAUPPAUGE_HVR1275 19 +#define CX23885_BOARD_HAUPPAUGE_HVR1255 20 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3 From 878e6f5343f5cdf3a658188f4fa94c052e1d7108 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 8 May 2009 23:34:31 -0400 Subject: cx18: Add missing newline to tuner detection error message From: Andy Walls Priority: normal Signed-off-by: Andy Walls --- linux/drivers/media/video/cx18/cx18-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c index 41997dd18..f42a97314 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.c +++ b/linux/drivers/media/video/cx18/cx18-driver.c @@ -313,7 +313,7 @@ static void cx18_process_eeprom(struct cx18 *cx) CX18_INFO("Autodetected %s\n", cx->card_name); if (tv.tuner_type == TUNER_ABSENT) - CX18_ERR("tveeprom cannot autodetect tuner!"); + CX18_ERR("tveeprom cannot autodetect tuner!\n"); if (cx->options.tuner == -1) cx->options.tuner = tv.tuner_type; -- cgit v1.2.3 From 2b01e0e4cd5cd2969d0b64c23608f18da907e20b Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 8 May 2009 23:43:40 -0400 Subject: tveeprom: Point the TCL MNM05-4 tuner entry to an actual tuner definition From: Andy Walls The TCL MNM05-04 is used on some HVR-1600 models. It appears to be similar to the TCL MFMN05-4 but without FM radio. The TUNER_PHILIPS_FM1236_MK3 tuner definition appears to be the proper existing tuner definition to use for this tuner. Reported-by: Matt Beadon Priority: normal Tested-by: Matt Beadon Signed-off-by: Andy Walls --- linux/drivers/media/video/tveeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/tveeprom.c b/linux/drivers/media/video/tveeprom.c index cdea91aae..7d6459dd2 100644 --- a/linux/drivers/media/video/tveeprom.c +++ b/linux/drivers/media/video/tveeprom.c @@ -211,7 +211,7 @@ hauppauge_tuner[] = { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, { TUNER_ABSENT, "Panasonic ENV57H12D5"}, { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"}, - { TUNER_ABSENT, "TCL MNM05-4"}, + { TUNER_PHILIPS_FM1236_MK3, "TCL MNM05-4"}, { TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"}, { TUNER_ABSENT, "TCL MQNM05-4"}, { TUNER_ABSENT, "LG TAPC-W701D"}, -- cgit v1.2.3 From e45c6d33fbee270c6642910bd7d706d602d72914 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sat, 9 May 2009 21:40:45 +0200 Subject: soc-camera: Fix section mismatch warning From: Guennadi Liakhovetski modpost needs a __refdata marker in driver structs to ensure references to .probe and .remove functions from .devinit.text and .devexit.text sections respectively are valid. Add __refdata to soc_camera_pdrv platform driver. Signed-off-by: Guennadi Liakhovetski --- drivers/media/video/soc_camera.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) --- linux/drivers/media/video/soc_camera.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/soc_camera.c b/linux/drivers/media/video/soc_camera.c index f792ab2e5..822052b25 100644 --- a/linux/drivers/media/video/soc_camera.c +++ b/linux/drivers/media/video/soc_camera.c @@ -1204,7 +1204,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev) return 0; } -static struct platform_driver soc_camera_pdrv = { +static struct platform_driver __refdata soc_camera_pdrv = { .probe = soc_camera_pdrv_probe, .remove = __exit_p(soc_camera_pdrv_remove), .driver = { -- cgit v1.2.3 From cfff66b2575874f0f9c6677cba1a54bb166c444b Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 9 May 2009 16:00:23 -0500 Subject: pvrusb2: Allocate a routing ID for future support of Terratec Grabster AV400 From: Mike Isely Priority: normal Signed-off-by: Mike Isely --- linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 73e0e0ba0..ea04ecf8a 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -69,6 +69,7 @@ struct pvr2_string_table { #define PVR2_ROUTING_SCHEME_HAUPPAUGE 0 #define PVR2_ROUTING_SCHEME_GOTVIEW 1 #define PVR2_ROUTING_SCHEME_ONAIR 2 +#define PVR2_ROUTING_SCHEME_AV400 3 #define PVR2_DIGITAL_SCHEME_NONE 0 #define PVR2_DIGITAL_SCHEME_HAUPPAUGE 1 -- cgit v1.2.3 From 39ae4cb418ef242558b61172ca37807dd184fb70 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 11 May 2009 19:51:32 +0200 Subject: soc_camera: depends on I2C From: Randy Dunlap soc_camera uses i2c_*() functions and has build errors when CONFIG_I2C=n: ERROR: "i2c_new_device" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_get_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_put_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_unregister_device" [drivers/media/video/soc_camera.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Guennadi Liakhovetski --- drivers/media/video/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) --- linux/drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 9d48da2fb..f3799cb67 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -694,7 +694,7 @@ config VIDEO_CAFE_CCIC config SOC_CAMERA tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA + depends on VIDEO_V4L2 && HAS_DMA && I2C select VIDEOBUF_GEN help SoC Camera is a common API to several cameras, not connecting -- cgit v1.2.3 From e8b29e62cfa708cab8f3f2dc6cb55a433ccfe561 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 11 May 2009 09:37:41 -0700 Subject: 2: handle unregister for non-I2C builds From: Randy Dunlap Build fails when CONFIG_I2C=n, so handle that case in the if block: drivers/built-in.o: In function `v4l2_device_unregister': (.text+0x157821): undefined reference to `i2c_unregister_device' Signed-off-by: Randy Dunlap Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/v4l2-device.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/v4l2-device.c b/linux/drivers/media/video/v4l2-device.c index c76f83840..b962862fe 100644 --- a/linux/drivers/media/video/v4l2-device.c +++ b/linux/drivers/media/video/v4l2-device.c @@ -86,6 +86,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) /* Unregister subdevs */ list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) { v4l2_device_unregister_subdev(sd); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -96,6 +97,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) if (client) i2c_unregister_device(client); } +#endif } } EXPORT_SYMBOL_GPL(v4l2_device_unregister); -- cgit v1.2.3 From d43f81dbba069842d0b1d0083b6f64e0eb9f9c38 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 12 May 2009 16:32:17 -0400 Subject: cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210 From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-cards.c | 20 +++++++++++++++++-- linux/drivers/media/video/cx23885/cx23885-dvb.c | 24 +++++++++++++++++++++++ linux/drivers/media/video/cx23885/cx23885.h | 1 + 3 files changed, 43 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 2d398f755..0e65a2d25 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -194,6 +194,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1255", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1210] = { + .name = "Hauppauge WinTV-HVR1210", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -305,6 +309,14 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x2251, .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, + .subdevice = 0x2291, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x2295, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -647,9 +659,10 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1210: /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ - /* GPIO-6 I2C Gate which can isolate the 3305 from the bus */ - /* GPIO-9 LG3305 reset */ + /* GPIO-6 I2C Gate which can isolate the demod from the bus */ + /* GPIO-9 Demod reset */ /* Put the parts into reset and back */ cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1); @@ -673,6 +686,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1210: /* FIXME: Implement me */ break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: @@ -711,6 +725,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1210: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -771,6 +786,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1210: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index c671d8e46..28d7466f5 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -129,6 +129,15 @@ static struct tda10048_config hauppauge_hvr1200_config = { .clk_freq_khz = TDA10048_CLK_16000, }; +static struct tda10048_config hauppauge_hvr1210_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, +}; + static struct s5h1409_config hauppauge_ezqam_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, @@ -238,6 +247,10 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = { .gate = TDA18271_GATE_ANALOG, }; +static struct tda18271_config hauppauge_hvr1210_tuner_config = { + .gate = TDA18271_GATE_DIGITAL, +}; + static struct tda18271_std_map hcw_lgdt3305_tda18271_std_map = { .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, .if_lvl = 1, .rfagc_top = 0x58 }, @@ -555,6 +568,17 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1200_tuner_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1210: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1210_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1210_tuner_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1400: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(dib7000p_attach, diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 947ade659..8dba2fdd6 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -75,6 +75,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1270 18 #define CX23885_BOARD_HAUPPAUGE_HVR1275 19 #define CX23885_BOARD_HAUPPAUGE_HVR1255 20 +#define CX23885_BOARD_HAUPPAUGE_HVR1210 21 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3 From e93650ed915f11162ed9004e4cfb2e9e4fd36367 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 12 May 2009 17:37:35 -0400 Subject: cx23885: update model matrix for "k2c2" retail boards From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-cards.c | 36 +++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 0e65a2d25..93176fe4b 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -358,6 +358,42 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) /* Make sure we support the board model */ switch (tv.model) { + case 22001: + /* WinTV-HVR1270 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Blast */ + case 22009: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Blast */ + case 22011: + /* WinTV-HVR1270 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Recv */ + case 22019: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Recv */ + case 22021: + /* WinTV-HVR1275 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Recv */ + case 22029: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Recv */ + case 22101: + /* WinTV-HVR1270 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Blast */ + case 22109: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Blast */ + case 22111: + /* WinTV-HVR1270 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Recv */ + case 22119: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Recv */ + case 22121: + /* WinTV-HVR1275 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Recv */ + case 22129: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Recv */ case 71009: /* WinTV-HVR1200 (PCIe, Retail, full height) * DVB-T and basic analog */ -- cgit v1.2.3 From 7e2fc0b0dd4648fcd4c2ca82093aebcfaed3e863 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 12 May 2009 17:53:47 -0400 Subject: cx23885: clean up struct names for Hauppauge WinTV-HVR127X devices From: Michael Krufky Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-dvb.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 28d7466f5..ba120b9cf 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -251,18 +251,18 @@ static struct tda18271_config hauppauge_hvr1210_tuner_config = { .gate = TDA18271_GATE_DIGITAL, }; -static struct tda18271_std_map hcw_lgdt3305_tda18271_std_map = { +static struct tda18271_std_map hauppauge_hvr127x_std_map = { .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, .if_lvl = 1, .rfagc_top = 0x58 }, .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, .if_lvl = 1, .rfagc_top = 0x58 }, }; -static struct tda18271_config hcw_lgdt3305_tda18271_config = { - .std_map = &hcw_lgdt3305_tda18271_std_map, +static struct tda18271_config hauppauge_hvr127x_config = { + .std_map = &hauppauge_hvr127x_std_map, }; -static struct lgdt3305_config hcw_lgdt3305_config = { +static struct lgdt3305_config hauppauge_lgdt3305_config = { .i2c_addr = 0x0e, .mpeg_mode = LGDT3305_MPEG_SERIAL, .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, @@ -449,12 +449,12 @@ static int dvb_register(struct cx23885_tsport *port) case CX23885_BOARD_HAUPPAUGE_HVR1275: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(lgdt3305_attach, - &hcw_lgdt3305_config, + &hauppauge_lgdt3305_config, &i2c_bus->i2c_adap); if (fe0->dvb.frontend != NULL) { dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_bus[1].i2c_adap, - &hcw_lgdt3305_tda18271_config); + &hauppauge_hvr127x_config); } break; case CX23885_BOARD_HAUPPAUGE_HVR1255: -- cgit v1.2.3 From a3f229ca91e3b8f799c2799ab2cf3398fff6bcaf Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 14 May 2009 20:50:36 -0400 Subject: cx88: remove xc5000 reset for Pinnacle 800i From: Devin Heitmueller According to the engineer at PCTV Systems, the xc5000 reset pin is supposed to be on GPIO12. However, despite three nights of effort, pulling that GPIO low didn't reset the xc5000. While pulling MO_SRST_IO low does reset the xc5000, this also resets in the s5h1409 being reset as well. This causes tuning to always fail since the internal state of the s5h1409 does not match the driver's state. Given that the only two conditions in which the driver performs a reset is during firmware load and powering down the chip, I am taking out the reset. We know that the chip is being reset when the cx88 comes online, and not being able to do power management for this board is better than not having any tuning at all. Problem discovered when implementing proper power management for the xc5000, which results in calls to the reset callback *after* s5h1409 is initialized. Priority: normal Signed-off-by: Devin Heitmueller Cc: Steven Toth Cc: Chaogui Zhang --- linux/drivers/media/video/cx88/cx88-cards.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx88/cx88-cards.c b/linux/drivers/media/video/cx88/cx88-cards.c index c9bfa835e..546793c02 100644 --- a/linux/drivers/media/video/cx88/cx88-cards.c +++ b/linux/drivers/media/video/cx88/cx88-cards.c @@ -2735,10 +2735,22 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core, switch (core->boardnr) { case CX88_BOARD_PINNACLE_PCTV_HD_800i: if (command == 0) { /* This is the reset command from xc5000 */ - /* Reset XC5000 tuner via SYS_RSTO_pin */ - cx_write(MO_SRST_IO, 0); - msleep(10); - cx_write(MO_SRST_IO, 1); + + /* djh - According to the engineer at PCTV Systems, + the xc5000 reset pin is supposed to be on GPIO12. + However, despite three nights of effort, pulling + that GPIO low didn't reset the xc5000. While + pulling MO_SRST_IO low does reset the xc5000, this + also resets in the s5h1409 being reset as well. + This causes tuning to always fail since the internal + state of the s5h1409 does not match the driver's + state. Given that the only two conditions in which + the driver performs a reset is during firmware load + and powering down the chip, I am taking out the + reset. We know that the chip is being reset + when the cx88 comes online, and not being able to + do power management for this board is worse than + not having any tuning at all. */ return 0; } else { err_printk(core, "xc5000: unknown tuner " -- cgit v1.2.3 From d0db8610838988ce38aff9812c90d8623097e0f5 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 14 May 2009 22:38:51 -0400 Subject: au0828: get rid of debug printk that was causing compile failures From: Devin Heitmueller Remove a debug printk() line I added which is no longer needed, and happened to be causing compile failures on some earlier kernels in Han's daily compile report. Priority: normal Signed-off-by: Devin Heitmueller --- linux/drivers/media/video/au0828/au0828-video.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/au0828/au0828-video.c b/linux/drivers/media/video/au0828/au0828-video.c index 8bc0f0481..a2414818c 100644 --- a/linux/drivers/media/video/au0828/au0828-video.c +++ b/linux/drivers/media/video/au0828/au0828-video.c @@ -915,11 +915,6 @@ static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); - dprintk(2, "vma start=0x%08lx, size=%ld, ret=%d\n", - (unsigned long)vma->vm_start, - (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, - rc); - return rc; } -- cgit v1.2.3 From 0144095d5249bc72fdc5930fa52de0fc29a5ac6f Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sat, 16 May 2009 16:09:28 -0400 Subject: em28xx: properly set packet size based on the device's eeprom configuration. From: Devin Heitmueller The em28xx actually has a register that tells the driver what the maximum packet size is (based on a value programmed into the eeprom). Make use of that register instead of assuming a hardcoded value of 564 (since 564 is not correct for devices that do QAM such as the KWorld 340u). Note that for now the em2874 code isn't there, falling back to the 564 value, however this is not a problem since there are not any em2874 based devices in the current v4l-dvb tree). Thanks to Jarod Wilson for detecting the initial problem and figuring out that the isoc configuration was wrong for his device. Priority: normal Signed-off-by: Devin Heitmueller Cc: Jarod Wilson --- linux/drivers/media/video/em28xx/em28xx-core.c | 35 ++++++++++++++++++++++++++ linux/drivers/media/video/em28xx/em28xx-dvb.c | 6 +++-- linux/drivers/media/video/em28xx/em28xx-reg.h | 16 ++++++++++++ linux/drivers/media/video/em28xx/em28xx.h | 1 + 4 files changed, 56 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c index 401dc4e39..02e51af9d 100644 --- a/linux/drivers/media/video/em28xx/em28xx-core.c +++ b/linux/drivers/media/video/em28xx/em28xx-core.c @@ -1021,6 +1021,41 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets, } EXPORT_SYMBOL_GPL(em28xx_init_isoc); +/* Determine the packet size for the DVB stream for the given device + (underlying value programmed into the eeprom) */ +int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev) +{ + unsigned int chip_cfg2; + unsigned int packet_size = 564; + + if (dev->chip_id == CHIP_ID_EM2874) { + /* FIXME - for now assume 564 like it was before, but the + em2874 code should be added to return the proper value... */ + packet_size = 564; + } else { + /* TS max packet size stored in bits 1-0 of R01 */ + chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2); + switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) { + case EM28XX_CHIPCFG2_TS_PACKETSIZE_188: + packet_size = 188; + break; + case EM28XX_CHIPCFG2_TS_PACKETSIZE_376: + packet_size = 376; + break; + case EM28XX_CHIPCFG2_TS_PACKETSIZE_564: + packet_size = 564; + break; + case EM28XX_CHIPCFG2_TS_PACKETSIZE_752: + packet_size = 752; + break; + } + } + + em28xx_coredbg("dvb max packet size=%d\n", packet_size); + return packet_size; +} +EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize); + /* * em28xx_wake_i2c() * configure i2c attached devices diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c index dd749442d..de919504f 100644 --- a/linux/drivers/media/video/em28xx/em28xx-dvb.c +++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c @@ -47,7 +47,6 @@ if (debug >= level) \ } while (0) #define EM28XX_DVB_NUM_BUFS 5 -#define EM28XX_DVB_MAX_PACKETSIZE 564 #define EM28XX_DVB_MAX_PACKETS 64 struct em28xx_dvb { @@ -143,14 +142,17 @@ static int start_streaming(struct em28xx_dvb *dvb) { int rc; struct em28xx *dev = dvb->adapter.priv; + int max_dvb_packet_size; usb_set_interface(dev->udev, 0, 1); rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); if (rc < 0) return rc; + max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev); + return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, - EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE, + EM28XX_DVB_NUM_BUFS, max_dvb_packet_size, dvb_isoc_copy); } diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h index 24e39c568..a2676d63c 100644 --- a/linux/drivers/media/video/em28xx/em28xx-reg.h +++ b/linux/drivers/media/video/em28xx/em28xx-reg.h @@ -27,6 +27,22 @@ #define EM28XX_CHIPCFG_AC97 0x10 #define EM28XX_CHIPCFG_AUDIOMASK 0x30 +#define EM28XX_R01_CHIPCFG2 0x01 + +/* em28xx Chip Configuration 2 0x01 */ +#define EM28XX_CHIPCFG2_TS_PRESENT 0x10 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK 0x0c /* bits 3-2 */ +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF 0x00 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF 0x04 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF 0x08 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF 0x0c +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK 0x03 /* bits 0-1 */ +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188 0x00 +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376 0x01 +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564 0x02 +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752 0x03 + + /* GPIO/GPO registers */ #define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ #define EM28XX_R08_GPIO 0x08 /* em2820 or upper */ diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 966a3b924..3403a45e8 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -625,6 +625,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets, int num_bufs, int max_pkt_size, int (*isoc_copy) (struct em28xx *dev, struct urb *urb)); void em28xx_uninit_isoc(struct em28xx *dev); +int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev); int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode); int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio); void em28xx_wake_i2c(struct em28xx *dev); -- cgit v1.2.3 From 39d53fcd39df81baf92cc74a0de40d5a1cbbd9bf Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 19 May 2009 15:08:03 +0200 Subject: uvcvideo: Start status polling on device open From: Laurent Pinchart Most UVC camera include an interrupt endpoint to report control value changes, video streaming errors and camera button events. The USB controller continuously polls the interrupt endpoint to retrieve such events. This prevents the device from being auto-suspended, and thus consumes power. Reporting video streaming errors don't make sense when the V4L2 device is closed. Control value changes are probably useless as well if nobody listens to the events, although caching will probably have to be completely disabled then. No polling is thus be required when /dev/videoX is not opened. To enable auto-suspend and save power do not poll the interrupt endpoint until the device is open. We lose the ability to detect button events if no application is using the camera. http://bugzilla.kernel.org/show_bug.cgi?id=11948 Priority: normal Signed-off-by: Laurent Pinchart --- linux/drivers/media/video/uvc/uvc_driver.c | 1 + linux/drivers/media/video/uvc/uvc_status.c | 21 ++++++++++++++++++--- linux/drivers/media/video/uvc/uvc_v4l2.c | 14 ++++++++++++++ linux/drivers/media/video/uvc/uvcvideo.h | 3 +++ 4 files changed, 36 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 1768389c4..13bd05576 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -1594,6 +1594,7 @@ static int uvc_probe(struct usb_interface *intf, INIT_LIST_HEAD(&dev->entities); INIT_LIST_HEAD(&dev->streaming); kref_init(&dev->kref); + atomic_set(&dev->users, 0); dev->udev = usb_get_dev(udev); dev->intf = usb_get_intf(intf); diff --git a/linux/drivers/media/video/uvc/uvc_status.c b/linux/drivers/media/video/uvc/uvc_status.c index 1e1bda413..b05df63b4 100644 --- a/linux/drivers/media/video/uvc/uvc_status.c +++ b/linux/drivers/media/video/uvc/uvc_status.c @@ -206,7 +206,7 @@ int uvc_status_init(struct uvc_device *dev) dev->status, UVC_MAX_STATUS_SIZE, uvc_status_complete, dev, interval); - return usb_submit_urb(dev->int_urb, GFP_KERNEL); + return 0; } void uvc_status_cleanup(struct uvc_device *dev) @@ -217,15 +217,30 @@ void uvc_status_cleanup(struct uvc_device *dev) uvc_input_cleanup(dev); } -int uvc_status_suspend(struct uvc_device *dev) +int uvc_status_start(struct uvc_device *dev) +{ + if (dev->int_urb == NULL) + return 0; + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} + +void uvc_status_stop(struct uvc_device *dev) { usb_kill_urb(dev->int_urb); +} + +int uvc_status_suspend(struct uvc_device *dev) +{ + if (atomic_read(&dev->users)) + usb_kill_urb(dev->int_urb); + return 0; } int uvc_status_resume(struct uvc_device *dev) { - if (dev->int_urb == NULL) + if (dev->int_urb == NULL || atomic_read(&dev->users) == 0) return 0; return usb_submit_urb(dev->int_urb, GFP_NOIO); diff --git a/linux/drivers/media/video/uvc/uvc_v4l2.c b/linux/drivers/media/video/uvc/uvc_v4l2.c index bc13dbf05..160c01314 100644 --- a/linux/drivers/media/video/uvc/uvc_v4l2.c +++ b/linux/drivers/media/video/uvc/uvc_v4l2.c @@ -443,6 +443,17 @@ static int uvc_v4l2_open(struct file *file) goto done; } + if (atomic_inc_return(&video->dev->users) == 1) { + if ((ret = uvc_status_start(video->dev)) < 0) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) + usb_autopm_put_interface(video->dev->intf); +#endif + atomic_dec(&video->dev->users); + kfree(handle); + goto done; + } + } + handle->device = video; handle->state = UVC_HANDLE_PASSIVE; file->private_data = handle; @@ -477,6 +488,9 @@ static int uvc_v4l2_release(struct file *file) kfree(handle); file->private_data = NULL; + if (atomic_dec_return(&video->dev->users) == 0) + uvc_status_stop(video->dev); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) usb_autopm_put_interface(video->dev->intf); #endif diff --git a/linux/drivers/media/video/uvc/uvcvideo.h b/linux/drivers/media/video/uvc/uvcvideo.h index 53d5c9e0c..6b254fd39 100644 --- a/linux/drivers/media/video/uvc/uvcvideo.h +++ b/linux/drivers/media/video/uvc/uvcvideo.h @@ -635,6 +635,7 @@ struct uvc_device { enum uvc_device_state state; struct kref kref; struct list_head list; + atomic_t users; /* Video control interface */ __u16 uvc_version; @@ -771,6 +772,8 @@ extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, /* Status */ extern int uvc_status_init(struct uvc_device *dev); extern void uvc_status_cleanup(struct uvc_device *dev); +extern int uvc_status_start(struct uvc_device *dev); +extern void uvc_status_stop(struct uvc_device *dev); extern int uvc_status_suspend(struct uvc_device *dev); extern int uvc_status_resume(struct uvc_device *dev); -- cgit v1.2.3 From 2da5cdaefead4beb36671ca025826f9e8deadef4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 19 May 2009 15:12:17 +0200 Subject: uvcvideo: Add Lenovo Thinkpad SL400 to device list comments From: Filipe Rosset Update the 17ef:480b device comment to list Lenovo Thinkpad SL400. Priority: low Signed-off-by: Filipe Rosset Signed-off-by: Laurent Pinchart --- linux/drivers/media/video/uvc/uvc_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 13bd05576..177d149a5 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -1907,7 +1907,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_STREAM_NO_FID }, - /* Lenovo Thinkpad SL500 */ + /* Lenovo Thinkpad SL400/SL500 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x17ef, -- cgit v1.2.3 From 2e02dfe7b2fb1d1e4f2ac047fae75df83bdd3042 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 23 May 2009 09:58:52 -0300 Subject: em28xx: add Terratec Grabby From: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/em28xx/em28xx-cards.c | 18 ++++++++++++++++++ linux/drivers/media/video/em28xx/em28xx.h | 1 + 2 files changed, 19 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index fb83e4f6e..088096def 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -1412,6 +1412,22 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2860_BOARD_TERRATEC_GRABBY] = { + .name = "Terratec Grabby", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO2, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_VIDEO2, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1479,6 +1495,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_TERRATEC_XS }, { USB_DEVICE(0x0ccd, 0x0047), .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, + { USB_DEVICE(0x0ccd, 0x0096), + .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x185b, 0x2870), .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, { USB_DEVICE(0x185b, 0x2041), diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 3403a45e8..ba96a2a37 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -104,6 +104,7 @@ #define EM2860_BOARD_EASYCAP 64 #define EM2820_BOARD_IODATA_GVMVP_SZ 65 #define EM2880_BOARD_EMPIRE_DUAL_TV 66 +#define EM2860_BOARD_TERRATEC_GRABBY 67 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 -- cgit v1.2.3 From 6179574749a379de2bfd3ee4f5496cc2ffc35218 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 24 May 2009 00:46:01 -0300 Subject: Add support for Terratec Grabster AV350 From: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/em28xx/em28xx-cards.c | 32 +++++++++++++++++++++++++ linux/drivers/media/video/em28xx/em28xx.h | 1 + 2 files changed, 33 insertions(+) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 088096def..1dff7528a 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -153,6 +153,16 @@ static struct em28xx_reg_seq compro_mute_gpio[] = { { -1, -1, -1, -1}, }; +/* Terratec AV350 */ +static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0x7f, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + { -1, -1, -1, -1}, +}; /* * Board definitions */ @@ -1428,6 +1438,26 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO2, } }, }, + [EM2860_BOARD_TERRATEC_AV350] = { + .name = "Terratec AV350", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .mute_gpio = terratec_av350_mute_gpio, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AUDIO_SRC_LINE, + .gpio = terratec_av350_unmute_gpio, + + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AUDIO_SRC_LINE, + .gpio = terratec_av350_unmute_gpio, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1495,6 +1525,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_TERRATEC_XS }, { USB_DEVICE(0x0ccd, 0x0047), .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, + { USB_DEVICE(0x0ccd, 0x0084), + .driver_info = EM2860_BOARD_TERRATEC_AV350 }, { USB_DEVICE(0x0ccd, 0x0096), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x185b, 0x2870), diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index ba96a2a37..1bb4a8242 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -105,6 +105,7 @@ #define EM2820_BOARD_IODATA_GVMVP_SZ 65 #define EM2880_BOARD_EMPIRE_DUAL_TV 66 #define EM2860_BOARD_TERRATEC_GRABBY 67 +#define EM2860_BOARD_TERRATEC_AV350 68 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 -- cgit v1.2.3 From b474230d34df50ee4b5f01a6264ffb2d41dc5f9e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 11 May 2009 14:00:20 +0000 Subject: change kmalloc to vmalloc for sglist allocation in videobuf_dma_map/unmap From: Cohen David.A Change kmalloc()/kfree() to vmalloc()/vfree() for sglist allocation during videobuf_dma_map() and videobuf_dma_unmap() High resolution sensors might require too many contiguous pages to be allocated for sglist by kmalloc() during videobuf_dma_map() (i.e. 256Kib for 8MP sensor). In such situations, kmalloc() could face some problem to find the required free memory. vmalloc() is a safer solution instead, as the allocated memory does not need to be contiguous. Signed-off-by: David Cohen Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/videobuf-dma-sg.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/videobuf-dma-sg.c b/linux/drivers/media/video/videobuf-dma-sg.c index ed38145e1..623e2fc12 100644 --- a/linux/drivers/media/video/videobuf-dma-sg.c +++ b/linux/drivers/media/video/videobuf-dma-sg.c @@ -59,9 +59,10 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages) struct page *pg; int i; - sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL); + sglist = vmalloc(nr_pages * sizeof(*sglist)); if (NULL == sglist) return NULL; + memset(sglist, 0, nr_pages * sizeof(*sglist)); sg_init_table(sglist, nr_pages); for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) { pg = vmalloc_to_page(virt); @@ -73,7 +74,7 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages) return sglist; err: - kfree(sglist); + vfree(sglist); return NULL; } @@ -85,7 +86,7 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset) if (NULL == pages[0]) return NULL; - sglist = kmalloc(nr_pages * sizeof(*sglist), GFP_KERNEL); + sglist = vmalloc(nr_pages * sizeof(*sglist)); if (NULL == sglist) return NULL; sg_init_table(sglist, nr_pages); @@ -105,12 +106,12 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset) nopage: dprintk(2,"sgl: oops - no page\n"); - kfree(sglist); + vfree(sglist); return NULL; highmem: dprintk(2,"sgl: oops - highmem page\n"); - kfree(sglist); + vfree(sglist); return NULL; } @@ -231,7 +232,7 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma) (dma->vmalloc,dma->nr_pages); } if (dma->bus_addr) { - dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL); + dma->sglist = vmalloc(sizeof(*dma->sglist)); if (NULL != dma->sglist) { dma->sglen = 1; sg_dma_address(&dma->sglist[0]) = dma->bus_addr & PAGE_MASK; @@ -249,7 +250,7 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma) if (0 == dma->sglen) { printk(KERN_WARNING "%s: videobuf_map_sg failed\n",__func__); - kfree(dma->sglist); + vfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; return -EIO; @@ -275,7 +276,7 @@ int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma) dma_unmap_sg(q->dev, dma->sglist, dma->nr_pages, dma->direction); - kfree(dma->sglist); + vfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; return 0; -- cgit v1.2.3 From e420aed19a5f4a2715733f2a450e8958fa7e2638 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:48:07 +0000 Subject: ir-kbd-i2c: Don't use i2c_client.name for our own needs From: Jean Delvare In the standard device driver binding model, the name field of struct i2c_client is used to match devices to their drivers, so we must stop using it for internal purposes. Define a separate field in struct IR_i2c as a replacement, and use it. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/cx231xx/cx231xx-input.c | 2 +- linux/drivers/media/video/em28xx/em28xx-cards.c | 10 +++++----- linux/drivers/media/video/em28xx/em28xx-input.c | 2 +- linux/drivers/media/video/ir-kbd-i2c.c | 5 +++-- linux/drivers/media/video/saa7134/saa7134-input.c | 12 ++++++------ 5 files changed, 16 insertions(+), 15 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx231xx/cx231xx-input.c b/linux/drivers/media/video/cx231xx/cx231xx-input.c index 04d954cca..3171b0177 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-input.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-input.c @@ -37,7 +37,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); #define i2cdprintk(fmt, arg...) \ if (ir_debug) { \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ } #define dprintk(fmt, arg...) \ diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 1dff7528a..60aa57660 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -1449,13 +1449,13 @@ struct em28xx_board em28xx_boards[] = { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AUDIO_SRC_LINE, - .gpio = terratec_av350_unmute_gpio, + .gpio = terratec_av350_unmute_gpio, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AUDIO_SRC_LINE, - .gpio = terratec_av350_unmute_gpio, + .gpio = terratec_av350_unmute_gpio, } }, }, }; @@ -1998,19 +1998,19 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) case (EM2820_BOARD_TERRATEC_CINERGY_250): ir->ir_codes = ir_codes_em_terratec; ir->get_key = em28xx_get_key_terratec; - snprintf(ir->c.name, sizeof(ir->c.name), + snprintf(ir->name, sizeof(ir->name), "i2c IR (EM28XX Terratec)"); break; case (EM2820_BOARD_PINNACLE_USB_2): ir->ir_codes = ir_codes_pinnacle_grey; ir->get_key = em28xx_get_key_pinnacle_usb_grey; - snprintf(ir->c.name, sizeof(ir->c.name), + snprintf(ir->name, sizeof(ir->name), "i2c IR (EM28XX Pinnacle PCTV)"); break; case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): ir->ir_codes = ir_codes_hauppauge_new; ir->get_key = em28xx_get_key_em_haup; - snprintf(ir->c.name, sizeof(ir->c.name), + snprintf(ir->name, sizeof(ir->name), "i2c IR (EM2840 Hauppauge)"); break; case (EM2820_BOARD_MSI_VOX_USB_2): diff --git a/linux/drivers/media/video/em28xx/em28xx-input.c b/linux/drivers/media/video/em28xx/em28xx-input.c index 5382a6064..31e80a4f0 100644 --- a/linux/drivers/media/video/em28xx/em28xx-input.c +++ b/linux/drivers/media/video/em28xx/em28xx-input.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); #define i2cdprintk(fmt, arg...) \ if (ir_debug) { \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ } #define dprintk(fmt, arg...) \ diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c index 7bae57ad3..bfc7afcca 100644 --- a/linux/drivers/media/video/ir-kbd-i2c.c +++ b/linux/drivers/media/video/ir-kbd-i2c.c @@ -346,6 +346,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, ir->c.adapter = adap; ir->c.addr = addr; + snprintf(ir->c.name, sizeof(ir->c.name), "ir-kbd"); i2c_set_clientdata(&ir->c, ir); @@ -419,7 +420,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, } /* Sets name */ - snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name); + snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); ir->ir_codes = ir_codes; /* register i2c device @@ -444,7 +445,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, /* init + register input device */ ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes); input_dev->id.bustype = BUS_I2C; - input_dev->name = ir->c.name; + input_dev->name = ir->name; input_dev->phys = ir->phys; err = input_register_device(ir->input); diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index 80a4cc23d..372c1cb48 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -60,7 +60,7 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of " #define dprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg) #define i2cdprintk(fmt, arg...) if (ir_debug) \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg) /* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */ static int saa7134_rc5_irq(struct saa7134_dev *dev); @@ -697,7 +697,7 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) switch (dev->board) { case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: - snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV"); + snprintf(ir->name, sizeof(ir->name), "Pinnacle PCTV"); if (pinnacle_remote == 0) { ir->get_key = get_key_pinnacle_color; ir->ir_codes = ir_codes_pinnacle_color; @@ -707,17 +707,17 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) } break; case SAA7134_BOARD_UPMOST_PURPLE_TV: - snprintf(ir->c.name, sizeof(ir->c.name), "Purple TV"); + snprintf(ir->name, sizeof(ir->name), "Purple TV"); ir->get_key = get_key_purpletv; ir->ir_codes = ir_codes_purpletv; break; case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: - snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus"); + snprintf(ir->name, sizeof(ir->name), "MSI TV@nywhere Plus"); ir->get_key = get_key_msi_tvanywhere_plus; ir->ir_codes = ir_codes_msi_tvanywhere_plus; break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: - snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110"); + snprintf(ir->name, sizeof(ir->name), "HVR 1110"); ir->get_key = get_key_hvr1110; ir->ir_codes = ir_codes_hauppauge_new; break; @@ -733,7 +733,7 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) case SAA7134_BOARD_BEHOLD_M63: case SAA7134_BOARD_BEHOLD_M6_EXTRA: case SAA7134_BOARD_BEHOLD_H6: - snprintf(ir->c.name, sizeof(ir->c.name), "BeholdTV"); + snprintf(ir->name, sizeof(ir->name), "BeholdTV"); ir->get_key = get_key_beholdm6xx; ir->ir_codes = ir_codes_behold; break; -- cgit v1.2.3 From b60f8e0b02ee9d9ef582e9df01eb81e5218baf9e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:48:50 +0000 Subject: ir-kbd-i2c: Switch to the new-style device binding model From: Jean Delvare Let card drivers probe for IR receiver devices and instantiate them if found. Ultimately it would be better if we could stop probing completely, but I suspect this won't be possible for all card types. There's certainly room for cleanups. For example, some drivers are sharing I2C adapter IDs, so they also had to share the list of I2C addresses being probed for an IR receiver. Now that each driver explicitly says which addresses should be probed, maybe some addresses can be dropped from some drivers. Also, the special cases in saa7134-i2c should probably be handled on a per-board basis. This would be more efficient and less risky than always probing extra addresses on all boards. I'll give it a try later. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/bt8xx/bttv-i2c.c | 21 +++ linux/drivers/media/video/cx231xx/cx231xx-cards.c | 11 +- linux/drivers/media/video/cx231xx/cx231xx-i2c.c | 3 + linux/drivers/media/video/cx231xx/cx231xx.h | 1 + linux/drivers/media/video/cx23885/cx23885-i2c.c | 12 ++ linux/drivers/media/video/cx88/cx88-i2c.c | 13 ++ linux/drivers/media/video/em28xx/em28xx-cards.c | 20 ++- linux/drivers/media/video/em28xx/em28xx-i2c.c | 3 + linux/drivers/media/video/em28xx/em28xx-input.c | 6 +- linux/drivers/media/video/em28xx/em28xx.h | 3 +- linux/drivers/media/video/ir-kbd-i2c.c | 200 ++++------------------ linux/drivers/media/video/ivtv/ivtv-i2c.c | 31 +++- linux/drivers/media/video/saa7134/saa7134-i2c.c | 3 + linux/drivers/media/video/saa7134/saa7134-input.c | 86 ++++++++-- linux/drivers/media/video/saa7134/saa7134.h | 1 + 15 files changed, 220 insertions(+), 194 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/bt8xx/bttv-i2c.c b/linux/drivers/media/video/bt8xx/bttv-i2c.c index bf94551c3..31f2f07d9 100644 --- a/linux/drivers/media/video/bt8xx/bttv-i2c.c +++ b/linux/drivers/media/video/bt8xx/bttv-i2c.c @@ -405,6 +405,27 @@ int __devinit init_bttv_i2c(struct bttv *btv) } if (0 == btv->i2c_rc && i2c_scan) do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client); + + /* Instantiate the IR receiver device, if present */ + if (0 == btv->i2c_rc) { + struct i2c_board_info info; + /* The external IR receiver is at i2c address 0x34 (0x35 for + reads). Future Hauppauge cards will have an internal + receiver at 0x30 (0x31 for reads). In theory, both can be + fitted, and Hauppauge suggest an external overrides an + internal. + + That's why we probe 0x1a (~0x34) first. CB + */ + const unsigned short addr_list[] = { + 0x1a, 0x18, 0x4b, 0x64, 0x30, + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list); + } return btv->i2c_rc; } diff --git a/linux/drivers/media/video/cx231xx/cx231xx-cards.c b/linux/drivers/media/video/cx231xx/cx231xx-cards.c index af6169516..88d9efd25 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-cards.c @@ -282,13 +282,16 @@ static void cx231xx_config_tuner(struct cx231xx *dev) } /* ----------------------------------------------------------------------- */ -void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir) +void cx231xx_register_i2c_ir(struct cx231xx *dev) { - if (disable_ir) { - ir->get_key = NULL; + if (disable_ir) return; - } + /* REVISIT: instantiate IR device */ +} + +void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir) +{ /* detect & configure */ switch (dev->model) { diff --git a/linux/drivers/media/video/cx231xx/cx231xx-i2c.c b/linux/drivers/media/video/cx231xx/cx231xx-i2c.c index d196fe666..6ca190c71 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-i2c.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-i2c.c @@ -540,6 +540,9 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus) if (0 == bus->i2c_rc) { if (i2c_scan) cx231xx_do_i2c_scan(dev, &bus->i2c_client); + + /* Instantiate the IR receiver device, if present */ + cx231xx_register_i2c_ir(dev); } else cx231xx_warn("%s: i2c bus %d register FAILED\n", dev->name, bus->nr); diff --git a/linux/drivers/media/video/cx231xx/cx231xx.h b/linux/drivers/media/video/cx231xx/cx231xx.h index 21b4023dd..85e098997 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx.h +++ b/linux/drivers/media/video/cx231xx/cx231xx.h @@ -747,6 +747,7 @@ extern void cx231xx_card_setup(struct cx231xx *dev); extern struct cx231xx_board cx231xx_boards[]; extern struct usb_device_id cx231xx_id_table[]; extern const unsigned int cx231xx_bcount; +void cx231xx_register_i2c_ir(struct cx231xx *dev); void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir); int cx231xx_tuner_callback(void *ptr, int component, int command, int arg); diff --git a/linux/drivers/media/video/cx23885/cx23885-i2c.c b/linux/drivers/media/video/cx23885/cx23885-i2c.c index a5d9f7530..4369470a3 100644 --- a/linux/drivers/media/video/cx23885/cx23885-i2c.c +++ b/linux/drivers/media/video/cx23885/cx23885-i2c.c @@ -364,6 +364,18 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", dev->name, bus->nr); + /* Instantiate the IR receiver device, if present */ + if (0 == bus->i2c_rc) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x6b, I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&bus->i2c_adap, &info, addr_list); + } + return bus->i2c_rc; } diff --git a/linux/drivers/media/video/cx88/cx88-i2c.c b/linux/drivers/media/video/cx88/cx88-i2c.c index 680a8c889..dbd629511 100644 --- a/linux/drivers/media/video/cx88/cx88-i2c.c +++ b/linux/drivers/media/video/cx88/cx88-i2c.c @@ -186,6 +186,19 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) do_i2c_scan(core->name,&core->i2c_client); } else printk("%s: i2c register FAILED\n", core->name); + + /* Instantiate the IR receiver device, if present */ + if (0 == core->i2c_rc) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x18, 0x6b, 0x71, + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&core->i2c_adap, &info, addr_list); + } return core->i2c_rc; } diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 60aa57660..cca8f1fcd 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -1981,13 +1981,23 @@ static int em28xx_hint_board(struct em28xx *dev) } /* ----------------------------------------------------------------------- */ -void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) +void em28xx_register_i2c_ir(struct em28xx *dev) { - if (disable_ir) { - ir->get_key = NULL; - return ; - } + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x30, 0x47, I2C_CLIENT_END + }; + + if (disable_ir) + return; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); +} + +void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) +{ /* detect & configure */ switch (dev->model) { case (EM2800_BOARD_UNKNOWN): diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c index 24456cebd..40b17785b 100644 --- a/linux/drivers/media/video/em28xx/em28xx-i2c.c +++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c @@ -581,6 +581,9 @@ int em28xx_i2c_register(struct em28xx *dev) if (i2c_scan) em28xx_do_i2c_scan(dev); + /* Instantiate the IR receiver device, if present */ + em28xx_register_i2c_ir(dev); + return 0; } diff --git a/linux/drivers/media/video/em28xx/em28xx-input.c b/linux/drivers/media/video/em28xx/em28xx-input.c index 31e80a4f0..bfe2cb8f6 100644 --- a/linux/drivers/media/video/em28xx/em28xx-input.c +++ b/linux/drivers/media/video/em28xx/em28xx-input.c @@ -86,7 +86,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c, &b, 1)) { + if (1 != i2c_master_recv(ir->c, &b, 1)) { i2cdprintk("read error\n"); return -EIO; } @@ -115,7 +115,7 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char code; /* poll IR chip */ - if (2 != i2c_master_recv(&ir->c, buf, 2)) + if (2 != i2c_master_recv(ir->c, buf, 2)) return -EIO; /* Does eliminate repeated parity code */ @@ -153,7 +153,7 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, /* poll IR chip */ - if (3 != i2c_master_recv(&ir->c, buf, 3)) { + if (3 != i2c_master_recv(ir->c, buf, 3)) { i2cdprintk("read error\n"); return -EIO; } diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 1bb4a8242..536be4b1c 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -105,7 +105,7 @@ #define EM2820_BOARD_IODATA_GVMVP_SZ 65 #define EM2880_BOARD_EMPIRE_DUAL_TV 66 #define EM2860_BOARD_TERRATEC_GRABBY 67 -#define EM2860_BOARD_TERRATEC_AV350 68 +#define EM2860_BOARD_TERRATEC_AV350 68 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -652,6 +652,7 @@ extern void em28xx_card_setup(struct em28xx *dev); extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; +void em28xx_register_i2c_ir(struct em28xx *dev); void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); int em28xx_tuner_callback(void *ptr, int component, int command, int arg); void em28xx_release_resources(struct em28xx *dev); diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c index bfc7afcca..2408b8327 100644 --- a/linux/drivers/media/video/ir-kbd-i2c.c +++ b/linux/drivers/media/video/ir-kbd-i2c.c @@ -75,7 +75,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, int start, range, toggle, dev, code, ircode; /* poll IR chip */ - if (size != i2c_master_recv(&ir->c,buf,size)) + if (size != i2c_master_recv(ir->c, buf, size)) return -EIO; /* split rc5 data block ... */ @@ -138,7 +138,7 @@ static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c,&b,1)) { + if (1 != i2c_master_recv(ir->c, &b, 1)) { dprintk(1,"read error\n"); return -EIO; } @@ -152,7 +152,7 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c,&b,1)) { + if (1 != i2c_master_recv(ir->c, &b, 1)) { dprintk(1,"read error\n"); return -EIO; } @@ -172,7 +172,7 @@ static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char buf[4]; /* poll IR chip */ - if (4 != i2c_master_recv(&ir->c,buf,4)) { + if (4 != i2c_master_recv(ir->c, buf, 4)) { dprintk(1,"read error\n"); return -EIO; } @@ -196,7 +196,7 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c,&b,1)) { + if (1 != i2c_master_recv(ir->c, &b, 1)) { dprintk(1,"read error\n"); return -EIO; } @@ -223,12 +223,12 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char subaddr, key, keygroup; - struct i2c_msg msg[] = { { .addr = ir->c.addr, .flags = 0, + struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1}, - { .addr = ir->c.addr, .flags = I2C_M_RD, + { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &key, .len = 1} }; subaddr = 0x0d; - if (2 != i2c_transfer(ir->c.adapter, msg, 2)) { + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { dprintk(1, "read error\n"); return -EIO; } @@ -238,7 +238,7 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir, subaddr = 0x0b; msg[1].buf = &keygroup; - if (2 != i2c_transfer(ir->c.adapter, msg, 2)) { + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { dprintk(1, "read error\n"); return -EIO; } @@ -295,7 +295,7 @@ static void ir_work(struct work_struct *work) /* MSI TV@nywhere Plus requires more frequent polling otherwise it will miss some keypresses */ - if (ir->c.adapter->id == I2C_HW_SAA7134 && ir->c.addr == 0x30) + if (ir->c->adapter->id == I2C_HW_SAA7134 && ir->c->addr == 0x30) polling_interval = 50; ir_key_poll(ir); @@ -304,34 +304,15 @@ static void ir_work(struct work_struct *work) /* ----------------------------------------------------------------------- */ -static int ir_attach(struct i2c_adapter *adap, int addr, - unsigned short flags, int kind); -static int ir_detach(struct i2c_client *client); -static int ir_probe(struct i2c_adapter *adap); - -static struct i2c_driver driver = { - .driver = { - .name = "ir-kbd-i2c", - }, - .id = I2C_DRIVERID_INFRARED, - .attach_adapter = ir_probe, - .detach_client = ir_detach, -}; - -static struct i2c_client client_template = -{ - .name = "unset", - .driver = &driver -}; - -static int ir_attach(struct i2c_adapter *adap, int addr, - unsigned short flags, int kind) +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) { IR_KEYTAB_TYPE *ir_codes = NULL; char *name; int ir_type; struct IR_i2c *ir; struct input_dev *input_dev; + struct i2c_adapter *adap = client->adapter; + unsigned short addr = client->addr; int err; ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL); @@ -341,14 +322,9 @@ static int ir_attach(struct i2c_adapter *adap, int addr, goto err_out_free; } - ir->c = client_template; + ir->c = client; ir->input = input_dev; - - ir->c.adapter = adap; - ir->c.addr = addr; - snprintf(ir->c.name, sizeof(ir->c.name), "ir-kbd"); - - i2c_set_clientdata(&ir->c, ir); + i2c_set_clientdata(client, ir); switch(addr) { case 0x64: @@ -423,24 +399,9 @@ static int ir_attach(struct i2c_adapter *adap, int addr, snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); ir->ir_codes = ir_codes; - /* register i2c device - * At device register, IR codes may be changed to be - * board dependent. - */ - err = i2c_attach_client(&ir->c); - if (err) - goto err_out_free; - - /* If IR not supported or disabled, unregisters driver */ - if (ir->get_key == NULL) { - err = -ENODEV; - goto err_out_detach; - } - - /* Phys addr can only be set after attaching (for ir->c.dev) */ snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0", - dev_name(&ir->c.adapter->dev), - dev_name(&ir->c.dev)); + dev_name(&adap->dev), + dev_name(&client->dev)); /* init + register input device */ ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes); @@ -450,7 +411,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, err = input_register_device(ir->input); if (err) - goto err_out_detach; + goto err_out_free; printk(DEVNAME ": %s detected at %s [%s]\n", ir->input->name, ir->input->phys, adap->name); @@ -465,135 +426,42 @@ static int ir_attach(struct i2c_adapter *adap, int addr, return 0; - err_out_detach: - i2c_detach_client(&ir->c); err_out_free: input_free_device(input_dev); kfree(ir); return err; } -static int ir_detach(struct i2c_client *client) +static int ir_remove(struct i2c_client *client) { struct IR_i2c *ir = i2c_get_clientdata(client); /* kill outstanding polls */ cancel_delayed_work_sync(&ir->work); - /* unregister devices */ + /* unregister device */ input_unregister_device(ir->input); - i2c_detach_client(&ir->c); /* free memory */ kfree(ir); return 0; } -static int ir_probe(struct i2c_adapter *adap) -{ - - /* The external IR receiver is at i2c address 0x34 (0x35 for - reads). Future Hauppauge cards will have an internal - receiver at 0x30 (0x31 for reads). In theory, both can be - fitted, and Hauppauge suggest an external overrides an - internal. - - That's why we probe 0x1a (~0x34) first. CB - */ - - static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1}; - static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, 0x2d, -1 }; - static const int probe_em28XX[] = { 0x30, 0x47, -1 }; - static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 }; - static const int probe_cx23885[] = { 0x6b, -1 }; - const int *probe; - struct i2c_msg msg = { - .flags = I2C_M_RD, - .len = 0, - .buf = NULL, - }; - int i, rc; - - switch (adap->id) { - case I2C_HW_B_BT848: - probe = probe_bttv; - break; - case I2C_HW_B_CX2341X: - probe = probe_bttv; - break; - case I2C_HW_SAA7134: - probe = probe_saa7134; - break; - case I2C_HW_B_EM28XX: - probe = probe_em28XX; - break; - case I2C_HW_B_CX2388x: - probe = probe_cx88; - break; - case I2C_HW_B_CX23885: - probe = probe_cx23885; - break; - default: - return 0; - } - - for (i = 0; -1 != probe[i]; i++) { - msg.addr = probe[i]; - rc = i2c_transfer(adap, &msg, 1); - dprintk(1,"probe 0x%02x @ %s: %s\n", - probe[i], adap->name, - (1 == rc) ? "yes" : "no"); - if (1 == rc) { - ir_attach(adap, probe[i], 0, 0); - return 0; - } - } - - /* Special case for MSI TV@nywhere Plus remote */ - if (adap->id == I2C_HW_SAA7134) { - u8 temp; - - /* MSI TV@nywhere Plus controller doesn't seem to - respond to probes unless we read something from - an existing device. Weird... */ - - msg.addr = 0x50; - rc = i2c_transfer(adap, &msg, 1); - dprintk(1, "probe 0x%02x @ %s: %s\n", - msg.addr, adap->name, - (1 == rc) ? "yes" : "no"); - - /* Now do the probe. The controller does not respond - to 0-byte reads, so we use a 1-byte read instead. */ - msg.addr = 0x30; - msg.len = 1; - msg.buf = &temp; - rc = i2c_transfer(adap, &msg, 1); - dprintk(1, "probe 0x%02x @ %s: %s\n", - msg.addr, adap->name, - (1 == rc) ? "yes" : "no"); - if (1 == rc) - ir_attach(adap, msg.addr, 0, 0); - } - - /* Special case for AVerMedia Cardbus remote */ - if (adap->id == I2C_HW_SAA7134) { - unsigned char subaddr, data; - struct i2c_msg msg[] = { { .addr = 0x40, .flags = 0, - .buf = &subaddr, .len = 1}, - { .addr = 0x40, .flags = I2C_M_RD, - .buf = &data, .len = 1} }; - subaddr = 0x0d; - rc = i2c_transfer(adap, msg, 2); - dprintk(1, "probe 0x%02x/0x%02x @ %s: %s\n", - msg[0].addr, subaddr, adap->name, - (2 == rc) ? "yes" : "no"); - if (2 == rc) - ir_attach(adap, msg[0].addr, 0, 0); - } +static const struct i2c_device_id ir_kbd_id[] = { + /* Generic entry for any IR receiver */ + { "ir_video", 0 }, + /* IR device specific entries could be added here */ + { } +}; - return 0; -} +static struct i2c_driver driver = { + .driver = { + .name = "ir-kbd-i2c", + }, + .probe = ir_probe, + .remove = ir_remove, + .id_table = ir_kbd_id, +}; /* ----------------------------------------------------------------------- */ diff --git a/linux/drivers/media/video/ivtv/ivtv-i2c.c b/linux/drivers/media/video/ivtv/ivtv-i2c.c index 984c73b5e..db3ac27da 100644 --- a/linux/drivers/media/video/ivtv/ivtv-i2c.c +++ b/linux/drivers/media/video/ivtv/ivtv-i2c.c @@ -592,9 +592,11 @@ static struct i2c_client ivtv_i2c_client_template = { .name = "ivtv internal", }; -/* init + register i2c algo-bit adapter */ +/* init + register i2c adapter + instantiate IR receiver */ int init_ivtv_i2c(struct ivtv *itv) { + int retval; + IVTV_DEBUG_I2C("i2c init\n"); /* Sanity checks for the I2C hardware arrays. They must be the @@ -634,9 +636,32 @@ int init_ivtv_i2c(struct ivtv *itv) ivtv_setsda(itv, 1); if (itv->options.newi2c > 0) - return i2c_add_adapter(&itv->i2c_adap); + retval = i2c_add_adapter(&itv->i2c_adap); else - return i2c_bit_add_bus(&itv->i2c_adap); + retval = i2c_bit_add_bus(&itv->i2c_adap); + + /* Instantiate the IR receiver device, if present */ + if (retval == 0) { + struct i2c_board_info info; + /* The external IR receiver is at i2c address 0x34 (0x35 for + reads). Future Hauppauge cards will have an internal + receiver at 0x30 (0x31 for reads). In theory, both can be + fitted, and Hauppauge suggest an external overrides an + internal. + + That's why we probe 0x1a (~0x34) first. CB + */ + const unsigned short addr_list[] = { + 0x1a, 0x18, 0x64, 0x30, + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&itv->i2c_adap, &info, addr_list); + } + + return retval; } void exit_ivtv_i2c(struct ivtv *itv) diff --git a/linux/drivers/media/video/saa7134/saa7134-i2c.c b/linux/drivers/media/video/saa7134/saa7134-i2c.c index 3eb60aabe..c934249db 100644 --- a/linux/drivers/media/video/saa7134/saa7134-i2c.c +++ b/linux/drivers/media/video/saa7134/saa7134-i2c.c @@ -444,6 +444,9 @@ int saa7134_i2c_register(struct saa7134_dev *dev) saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata)); if (i2c_scan) do_i2c_scan(dev->name,&dev->i2c_client); + + /* Instantiate the IR receiver device, if present */ + saa7134_probe_i2c_ir(dev); return 0; } diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index 372c1cb48..9b64ea543 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -134,10 +134,10 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, int gpio; /* is needed to access GPIO. Used by the saa_readl macro. */ - struct saa7134_dev *dev = ir->c.adapter->algo_data; + struct saa7134_dev *dev = ir->c->adapter->algo_data; if (dev == NULL) { dprintk("get_key_msi_tvanywhere_plus: " - "gir->c.adapter->algo_data is NULL!\n"); + "gir->c->adapter->algo_data is NULL!\n"); return -EIO; } @@ -156,7 +156,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, /* GPIO says there is a button press. Get it. */ - if (1 != i2c_master_recv(&ir->c, &b, 1)) { + if (1 != i2c_master_recv(ir->c, &b, 1)) { i2cdprintk("read error\n"); return -EIO; } @@ -179,7 +179,7 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c,&b,1)) { + if (1 != i2c_master_recv(ir->c, &b, 1)) { i2cdprintk("read error\n"); return -EIO; } @@ -202,7 +202,7 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char buf[5], cod4, code3, code4; /* poll IR chip */ - if (5 != i2c_master_recv(&ir->c,buf,5)) + if (5 != i2c_master_recv(ir->c, buf, 5)) return -EIO; cod4 = buf[4]; @@ -224,7 +224,7 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char data[12]; u32 gpio; - struct saa7134_dev *dev = ir->c.adapter->algo_data; + struct saa7134_dev *dev = ir->c->adapter->algo_data; /* rising SAA7134_GPIO_GPRESCAN reads the status */ saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); @@ -235,9 +235,9 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) if (0x400000 & ~gpio) return 0; /* No button press */ - ir->c.addr = 0x5a >> 1; + ir->c->addr = 0x5a >> 1; - if (12 != i2c_master_recv(&ir->c, data, 12)) { + if (12 != i2c_master_recv(ir->c, data, 12)) { i2cdprintk("read error\n"); return -EIO; } @@ -267,7 +267,7 @@ static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, unsigned int start = 0,parity = 0,code = 0; /* poll IR chip */ - if (4 != i2c_master_recv(&ir->c, b, 4)) { + if (4 != i2c_master_recv(ir->c, b, 4)) { i2cdprintk("read error\n"); return -EIO; } @@ -686,14 +686,76 @@ void saa7134_input_fini(struct saa7134_dev *dev) dev->remote = NULL; } -void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) +void saa7134_probe_i2c_ir(struct saa7134_dev *dev) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x7a, 0x47, 0x71, 0x2d, + I2C_CLIENT_END + }; + + const unsigned short addr_list_msi[] = { + 0x30, I2C_CLIENT_END + }; + struct i2c_msg msg_msi = { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 0, + .buf = NULL, + }; + + unsigned char subaddr, data; + struct i2c_msg msg_avermedia[] = { { + .addr = 0x40, + .flags = 0, + .len = 1, + .buf = &subaddr, + }, { + .addr = 0x40, + .flags = I2C_M_RD, + .len = 1, + .buf = &data, + } }; + + struct i2c_client *client; + int rc; + if (disable_ir) { - dprintk("Found supported i2c remote, but IR has been disabled\n"); - ir->get_key=NULL; + dprintk("IR has been disabled, not probing for i2c remote\n"); return; } + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); + if (client) + return; + + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); + client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list_msi); + if (client) + return; + + /* Special case for AVerMedia Cardbus remote */ + subaddr = 0x0d; + rc = i2c_transfer(&dev->i2c_adap, msg_avermedia, 2); + dprintk(KERN_DEBUG "probe 0x%02x/0x%02x @ %s: %s\n", + msg_avermedia[0].addr, subaddr, dev->i2c_adap.name, + (2 == rc) ? "yes" : "no"); + if (2 == rc) { + info.addr = msg_avermedia[0].addr; + i2c_new_device(&dev->i2c_adap, &info); + } +} + +void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) +{ switch (dev->board) { case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h index ae7ba8923..4accee8ff 100644 --- a/linux/drivers/media/video/saa7134/saa7134.h +++ b/linux/drivers/media/video/saa7134/saa7134.h @@ -804,6 +804,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status); int saa7134_input_init1(struct saa7134_dev *dev); void saa7134_input_fini(struct saa7134_dev *dev); void saa7134_input_irq(struct saa7134_dev *dev); +void saa7134_probe_i2c_ir(struct saa7134_dev *dev); void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir); void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir); void saa7134_ir_stop(struct saa7134_dev *dev); -- cgit v1.2.3 From ff5842e7e95c426abf87bbdb32361c523b1b98f0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:49:32 +0000 Subject: ir-kbd-i2c: Use initialization data From: Jean Delvare For specific boards, pass initialization data to ir-kbd-i2c instead of modifying the settings after the device is initialized. This is more efficient and easier to read. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/cx231xx/cx231xx-cards.c | 3 - linux/drivers/media/video/cx231xx/cx231xx-i2c.c | 29 ------- linux/drivers/media/video/cx231xx/cx231xx.h | 1 - linux/drivers/media/video/em28xx/em28xx-cards.c | 31 ++++---- linux/drivers/media/video/em28xx/em28xx-i2c.c | 22 ------ linux/drivers/media/video/em28xx/em28xx.h | 1 - linux/drivers/media/video/ir-kbd-i2c.c | 12 ++- linux/drivers/media/video/saa7134/saa7134-i2c.c | 28 ------- linux/drivers/media/video/saa7134/saa7134-input.c | 94 +++++++++++------------ linux/drivers/media/video/saa7134/saa7134.h | 1 - 10 files changed, 72 insertions(+), 150 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx231xx/cx231xx-cards.c b/linux/drivers/media/video/cx231xx/cx231xx-cards.c index 88d9efd25..68f92da9e 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-cards.c @@ -288,10 +288,7 @@ void cx231xx_register_i2c_ir(struct cx231xx *dev) return; /* REVISIT: instantiate IR device */ -} -void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir) -{ /* detect & configure */ switch (dev->model) { diff --git a/linux/drivers/media/video/cx231xx/cx231xx-i2c.c b/linux/drivers/media/video/cx231xx/cx231xx-i2c.c index 6ca190c71..e71005c59 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-i2c.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-i2c.c @@ -424,34 +424,6 @@ static u32 functionality(struct i2c_adapter *adap) return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; } -/* - * attach_inform() - * gets called when a device attaches to the i2c bus - * does some basic configuration - */ -static int attach_inform(struct i2c_client *client) -{ - struct cx231xx_i2c *bus = i2c_get_adapdata(client->adapter); - struct cx231xx *dev = bus->dev; - - switch (client->addr << 1) { - case 0x8e: - { - struct IR_i2c *ir = i2c_get_clientdata(client); - dprintk1(1, "attach_inform: IR detected (%s).\n", - ir->phys); - cx231xx_set_ir(dev, ir); - break; - } - break; - - default: - break; - } - - return 0; -} - static struct i2c_algorithm cx231xx_algo = { .master_xfer = cx231xx_i2c_xfer, .functionality = functionality, @@ -465,7 +437,6 @@ static struct i2c_adapter cx231xx_adap_template = { .name = "cx231xx", .id = I2C_HW_B_CX231XX, .algo = &cx231xx_algo, - .client_register = attach_inform, }; static struct i2c_client cx231xx_client_template = { diff --git a/linux/drivers/media/video/cx231xx/cx231xx.h b/linux/drivers/media/video/cx231xx/cx231xx.h index 85e098997..d3c05186e 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx.h +++ b/linux/drivers/media/video/cx231xx/cx231xx.h @@ -748,7 +748,6 @@ extern struct cx231xx_board cx231xx_boards[]; extern struct usb_device_id cx231xx_id_table[]; extern const unsigned int cx231xx_bcount; void cx231xx_register_i2c_ir(struct cx231xx *dev); -void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir); int cx231xx_tuner_callback(void *ptr, int component, int command, int arg); /* Provided by cx231xx-input.c */ diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index cca8f1fcd..c765d769b 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -1984,6 +1984,7 @@ static int em28xx_hint_board(struct em28xx *dev) void em28xx_register_i2c_ir(struct em28xx *dev) { struct i2c_board_info info; + struct IR_i2c_init_data init_data; const unsigned short addr_list[] = { 0x30, 0x47, I2C_CLIENT_END }; @@ -1992,12 +1993,9 @@ void em28xx_register_i2c_ir(struct em28xx *dev) return; memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&init_data, 0, sizeof(struct IR_i2c_init_data)); strlcpy(info.type, "ir_video", I2C_NAME_SIZE); - i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); -} -void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) -{ /* detect & configure */ switch (dev->model) { case (EM2800_BOARD_UNKNOWN): @@ -2006,22 +2004,19 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) break; case (EM2800_BOARD_TERRATEC_CINERGY_200): case (EM2820_BOARD_TERRATEC_CINERGY_250): - ir->ir_codes = ir_codes_em_terratec; - ir->get_key = em28xx_get_key_terratec; - snprintf(ir->name, sizeof(ir->name), - "i2c IR (EM28XX Terratec)"); + init_data.ir_codes = ir_codes_em_terratec; + init_data.get_key = em28xx_get_key_terratec; + init_data.name = "i2c IR (EM28XX Terratec)"; break; case (EM2820_BOARD_PINNACLE_USB_2): - ir->ir_codes = ir_codes_pinnacle_grey; - ir->get_key = em28xx_get_key_pinnacle_usb_grey; - snprintf(ir->name, sizeof(ir->name), - "i2c IR (EM28XX Pinnacle PCTV)"); + init_data.ir_codes = ir_codes_pinnacle_grey; + init_data.get_key = em28xx_get_key_pinnacle_usb_grey; + init_data.name = "i2c IR (EM28XX Pinnacle PCTV)"; break; case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): - ir->ir_codes = ir_codes_hauppauge_new; - ir->get_key = em28xx_get_key_em_haup; - snprintf(ir->name, sizeof(ir->name), - "i2c IR (EM2840 Hauppauge)"); + init_data.ir_codes = ir_codes_hauppauge_new; + init_data.get_key = em28xx_get_key_em_haup; + init_data.name = "i2c IR (EM2840 Hauppauge)"; break; case (EM2820_BOARD_MSI_VOX_USB_2): break; @@ -2032,6 +2027,10 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) case (EM2800_BOARD_GRABBEEX_USB2800): break; } + + if (init_data.name) + info.platform_data = &init_data; + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); } void em28xx_card_setup(struct em28xx *dev) diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c index 40b17785b..fd6be0e2c 100644 --- a/linux/drivers/media/video/em28xx/em28xx-i2c.c +++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c @@ -451,27 +451,6 @@ static u32 functionality(struct i2c_adapter *adap) return I2C_FUNC_SMBUS_EMUL; } -/* - * attach_inform() - * gets called when a device attaches to the i2c bus - * does some basic configuration - */ -static int attach_inform(struct i2c_client *client) -{ - struct em28xx *dev = client->adapter->algo_data; - struct IR_i2c *ir = i2c_get_clientdata(client); - - switch (client->addr << 1) { - case 0x60: - case 0x8e: - dprintk1(1, "attach_inform: IR detected (%s).\n", ir->phys); - em28xx_set_ir(dev, ir); - break; - } - - return 0; -} - static struct i2c_algorithm em28xx_algo = { .master_xfer = em28xx_i2c_xfer, .functionality = functionality, @@ -488,7 +467,6 @@ static struct i2c_adapter em28xx_adap_template = { .name = "em28xx", .id = I2C_HW_B_EM28XX, .algo = &em28xx_algo, - .client_register = attach_inform, }; static struct i2c_client em28xx_client_template = { diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 536be4b1c..e4ddc50c5 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -653,7 +653,6 @@ extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; void em28xx_register_i2c_ir(struct em28xx *dev); -void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); int em28xx_tuner_callback(void *ptr, int component, int command, int arg); void em28xx_release_resources(struct em28xx *dev); diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c index 2408b8327..6a81e74bb 100644 --- a/linux/drivers/media/video/ir-kbd-i2c.c +++ b/linux/drivers/media/video/ir-kbd-i2c.c @@ -307,7 +307,7 @@ static void ir_work(struct work_struct *work) static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) { IR_KEYTAB_TYPE *ir_codes = NULL; - char *name; + const char *name; int ir_type; struct IR_i2c *ir; struct input_dev *input_dev; @@ -395,6 +395,16 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) goto err_out_free; } + /* Let the caller override settings */ + if (client->dev.platform_data) { + const struct IR_i2c_init_data *init_data = + client->dev.platform_data; + + ir_codes = init_data->ir_codes; + name = init_data->name; + ir->get_key = init_data->get_key; + } + /* Sets name */ snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); ir->ir_codes = ir_codes; diff --git a/linux/drivers/media/video/saa7134/saa7134-i2c.c b/linux/drivers/media/video/saa7134/saa7134-i2c.c index c934249db..f5790b72d 100644 --- a/linux/drivers/media/video/saa7134/saa7134-i2c.c +++ b/linux/drivers/media/video/saa7134/saa7134-i2c.c @@ -326,33 +326,6 @@ static u32 functionality(struct i2c_adapter *adap) return I2C_FUNC_SMBUS_EMUL; } -static int attach_inform(struct i2c_client *client) -{ - struct saa7134_dev *dev = client->adapter->algo_data; - - d1printk( "%s i2c attach [addr=0x%x,client=%s]\n", - client->driver->driver.name, client->addr, client->name); - - /* Am I an i2c remote control? */ - - switch (client->addr) { - case 0x7a: - case 0x47: - case 0x71: - case 0x2d: - case 0x30: - { - struct IR_i2c *ir = i2c_get_clientdata(client); - d1printk("%s i2c IR detected (%s).\n", - client->driver->driver.name, ir->phys); - saa7134_set_i2c_ir(dev,ir); - break; - } - } - - return 0; -} - static struct i2c_algorithm saa7134_algo = { .master_xfer = saa7134_i2c_xfer, .functionality = functionality, @@ -369,7 +342,6 @@ static struct i2c_adapter saa7134_adap_template = { .name = "saa7134", .id = I2C_HW_SAA7134, .algo = &saa7134_algo, - .client_register = attach_inform, }; static struct i2c_client saa7134_client_template = { diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index 9b64ea543..d0a68dbfd 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -689,6 +689,7 @@ void saa7134_input_fini(struct saa7134_dev *dev) void saa7134_probe_i2c_ir(struct saa7134_dev *dev) { struct i2c_board_info info; + struct IR_i2c_init_data init_data; const unsigned short addr_list[] = { 0x7a, 0x47, 0x71, 0x2d, I2C_CLIENT_END @@ -726,62 +727,35 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) } memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&init_data, 0, sizeof(struct IR_i2c_init_data)); strlcpy(info.type, "ir_video", I2C_NAME_SIZE); - client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); - if (client) - return; - - /* MSI TV@nywhere Plus controller doesn't seem to - respond to probes unless we read something from - an existing device. Weird... */ - rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); - dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n", - msg_msi.addr, dev->i2c_adap.name, - (1 == rc) ? "yes" : "no"); - client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list_msi); - if (client) - return; - /* Special case for AVerMedia Cardbus remote */ - subaddr = 0x0d; - rc = i2c_transfer(&dev->i2c_adap, msg_avermedia, 2); - dprintk(KERN_DEBUG "probe 0x%02x/0x%02x @ %s: %s\n", - msg_avermedia[0].addr, subaddr, dev->i2c_adap.name, - (2 == rc) ? "yes" : "no"); - if (2 == rc) { - info.addr = msg_avermedia[0].addr; - i2c_new_device(&dev->i2c_adap, &info); - } -} - -void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) -{ switch (dev->board) { case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: - snprintf(ir->name, sizeof(ir->name), "Pinnacle PCTV"); + init_data.name = "Pinnacle PCTV"; if (pinnacle_remote == 0) { - ir->get_key = get_key_pinnacle_color; - ir->ir_codes = ir_codes_pinnacle_color; + init_data.get_key = get_key_pinnacle_color; + init_data.ir_codes = ir_codes_pinnacle_color; } else { - ir->get_key = get_key_pinnacle_grey; - ir->ir_codes = ir_codes_pinnacle_grey; + init_data.get_key = get_key_pinnacle_grey; + init_data.ir_codes = ir_codes_pinnacle_grey; } break; case SAA7134_BOARD_UPMOST_PURPLE_TV: - snprintf(ir->name, sizeof(ir->name), "Purple TV"); - ir->get_key = get_key_purpletv; - ir->ir_codes = ir_codes_purpletv; + init_data.name = "Purple TV"; + init_data.get_key = get_key_purpletv; + init_data.ir_codes = ir_codes_purpletv; break; case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: - snprintf(ir->name, sizeof(ir->name), "MSI TV@nywhere Plus"); - ir->get_key = get_key_msi_tvanywhere_plus; - ir->ir_codes = ir_codes_msi_tvanywhere_plus; + init_data.name = "MSI TV@nywhere Plus"; + init_data.get_key = get_key_msi_tvanywhere_plus; + init_data.ir_codes = ir_codes_msi_tvanywhere_plus; break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: - snprintf(ir->name, sizeof(ir->name), "HVR 1110"); - ir->get_key = get_key_hvr1110; - ir->ir_codes = ir_codes_hauppauge_new; + init_data.name = "HVR 1110"; + init_data.get_key = get_key_hvr1110; + init_data.ir_codes = ir_codes_hauppauge_new; break; case SAA7134_BOARD_BEHOLD_607FM_MK3: case SAA7134_BOARD_BEHOLD_607FM_MK5: @@ -795,15 +769,39 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) case SAA7134_BOARD_BEHOLD_M63: case SAA7134_BOARD_BEHOLD_M6_EXTRA: case SAA7134_BOARD_BEHOLD_H6: - snprintf(ir->name, sizeof(ir->name), "BeholdTV"); - ir->get_key = get_key_beholdm6xx; - ir->ir_codes = ir_codes_behold; - break; - default: - dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board); + init_data.name = "BeholdTV"; + init_data.get_key = get_key_beholdm6xx; + init_data.ir_codes = ir_codes_behold; break; } + if (init_data.name) + info.platform_data = &init_data; + client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); + if (client) + return; + + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); + client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list_msi); + if (client) + return; + + /* Special case for AVerMedia Cardbus remote */ + subaddr = 0x0d; + rc = i2c_transfer(&dev->i2c_adap, msg_avermedia, 2); + dprintk(KERN_DEBUG "probe 0x%02x/0x%02x @ %s: %s\n", + msg_avermedia[0].addr, subaddr, dev->i2c_adap.name, + (2 == rc) ? "yes" : "no"); + if (2 == rc) { + info.addr = msg_avermedia[0].addr; + i2c_new_device(&dev->i2c_adap, &info); + } } static int saa7134_rc5_irq(struct saa7134_dev *dev) diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h index 4accee8ff..be6763dde 100644 --- a/linux/drivers/media/video/saa7134/saa7134.h +++ b/linux/drivers/media/video/saa7134/saa7134.h @@ -805,7 +805,6 @@ int saa7134_input_init1(struct saa7134_dev *dev); void saa7134_input_fini(struct saa7134_dev *dev); void saa7134_input_irq(struct saa7134_dev *dev); void saa7134_probe_i2c_ir(struct saa7134_dev *dev); -void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir); void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir); void saa7134_ir_stop(struct saa7134_dev *dev); -- cgit v1.2.3 From 2c8bfee91d5f58d681bf8fe04c2d69ba7f7a6925 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:50:11 +0000 Subject: ir-kbd-i2c: Don't assume all IR receivers are supported From: Jean Delvare The code in ir_probe makes the dangerous assumption that all IR receivers are supported by the driver. The new i2c model makes it possible for bridge drivers to instantiate IR devices before they are supported, therefore the ir-kbd-i2c drivers must be made more robust to not spam the logs or even crash on unsupported IR devices. Simply, the driver will not bind to the unsupported devices. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/ir-kbd-i2c.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c index 6a81e74bb..0a18d07c7 100644 --- a/linux/drivers/media/video/ir-kbd-i2c.c +++ b/linux/drivers/media/video/ir-kbd-i2c.c @@ -307,7 +307,7 @@ static void ir_work(struct work_struct *work) static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) { IR_KEYTAB_TYPE *ir_codes = NULL; - const char *name; + const char *name = NULL; int ir_type; struct IR_i2c *ir; struct input_dev *input_dev; @@ -389,8 +389,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir_codes = ir_codes_avermedia_cardbus; break; default: - /* shouldn't happen */ - printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n", addr); + dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr); err = -ENODEV; goto err_out_free; } @@ -405,6 +404,14 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir->get_key = init_data->get_key; } + /* Make sure we are all setup before going on */ + if (!name || !ir->get_key || !ir_codes) { + dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n", + addr); + err = -ENODEV; + goto err_out_free; + } + /* Sets name */ snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); ir->ir_codes = ir_codes; -- cgit v1.2.3 From 39c428638134709e9d5d9d135db22ff39967175d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:51:46 +0000 Subject: saa7134: Simplify handling of IR on MSI TV@nywhere Plus From: Jean Delvare Now that we instantiate I2C IR devices explicitly, we can skip probing altogether on boards where the I2C IR device address is known. The MSI TV@nywhere Plus is one of these boards. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-input.c | 28 ++++++++++++----------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index d0a68dbfd..3dc600631 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -695,9 +695,6 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) I2C_CLIENT_END }; - const unsigned short addr_list_msi[] = { - 0x30, I2C_CLIENT_END - }; struct i2c_msg msg_msi = { .addr = 0x50, .flags = I2C_M_RD, @@ -751,6 +748,15 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) init_data.name = "MSI TV@nywhere Plus"; init_data.get_key = get_key_msi_tvanywhere_plus; init_data.ir_codes = ir_codes_msi_tvanywhere_plus; + info.addr = 0x30; + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... + REVISIT: might no longer be needed */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: init_data.name = "HVR 1110"; @@ -777,18 +783,14 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) if (init_data.name) info.platform_data = &init_data; - client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); - if (client) + /* No need to probe if address is known */ + if (info.addr) { + i2c_new_device(&dev->i2c_adap, &info); return; + } - /* MSI TV@nywhere Plus controller doesn't seem to - respond to probes unless we read something from - an existing device. Weird... */ - rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); - dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n", - msg_msi.addr, dev->i2c_adap.name, - (1 == rc) ? "yes" : "no"); - client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list_msi); + /* Address not known, fallback to probing */ + client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); if (client) return; -- cgit v1.2.3 From d7c1afcf9e6a72c1c7b85032e33a4a45091694b6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:52:44 +0000 Subject: saa7134: Simplify handling of IR on AVerMedia Cardbus E506R From: Jean Delvare Now that we instantiate I2C IR devices explicitly, we can skip probing altogether on boards where the I2C IR device address is known. The AVerMedia Cardbus E506R is one of these boards. Signed-off-by: Jean Delvare Tested-by: Oldrich Jedlicka Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-input.c | 33 ++++------------------- 1 file changed, 5 insertions(+), 28 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index 3dc600631..36913d22b 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -702,20 +702,6 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) .buf = NULL, }; - unsigned char subaddr, data; - struct i2c_msg msg_avermedia[] = { { - .addr = 0x40, - .flags = 0, - .len = 1, - .buf = &subaddr, - }, { - .addr = 0x40, - .flags = I2C_M_RD, - .len = 1, - .buf = &data, - } }; - - struct i2c_client *client; int rc; if (disable_ir) { @@ -779,6 +765,10 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) init_data.get_key = get_key_beholdm6xx; init_data.ir_codes = ir_codes_behold; break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + info.addr = 0x40; + break; } if (init_data.name) @@ -790,20 +780,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) } /* Address not known, fallback to probing */ - client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); - if (client) - return; - - /* Special case for AVerMedia Cardbus remote */ - subaddr = 0x0d; - rc = i2c_transfer(&dev->i2c_adap, msg_avermedia, 2); - dprintk(KERN_DEBUG "probe 0x%02x/0x%02x @ %s: %s\n", - msg_avermedia[0].addr, subaddr, dev->i2c_adap.name, - (2 == rc) ? "yes" : "no"); - if (2 == rc) { - info.addr = msg_avermedia[0].addr; - i2c_new_device(&dev->i2c_adap, &info); - } + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); } static int saa7134_rc5_irq(struct saa7134_dev *dev) -- cgit v1.2.3 From eeb337b881232de30fee5db9fb1899f381ca4249 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:55:13 +0000 Subject: ivtv: Probe more I2C addresses for IR devices From: Jean Delvare Probe I2C addresses 0x71 and 0x6b for IR receiver devices (for the PVR150 and Adaptec cards, respectively.) Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/ivtv/ivtv-i2c.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/ivtv/ivtv-i2c.c b/linux/drivers/media/video/ivtv/ivtv-i2c.c index db3ac27da..0d18c2220 100644 --- a/linux/drivers/media/video/ivtv/ivtv-i2c.c +++ b/linux/drivers/media/video/ivtv/ivtv-i2c.c @@ -652,7 +652,12 @@ int init_ivtv_i2c(struct ivtv *itv) That's why we probe 0x1a (~0x34) first. CB */ const unsigned short addr_list[] = { - 0x1a, 0x18, 0x64, 0x30, + 0x1a, /* Hauppauge IR external */ + 0x18, /* Hauppauge IR internal */ + 0x71, /* Hauppauge IR (PVR150) */ + 0x64, /* Pixelview IR */ + 0x30, /* KNC ONE IR */ + 0x6b, /* Adaptec IR */ I2C_CLIENT_END }; -- cgit v1.2.3 From 71d712e8f23494d0869cbc8e93b0dcf4891cc45a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 May 2009 19:56:20 +0000 Subject: pvrusb2: Instantiate ir_video I2C device by default From: Jean Delvare Now that the ir-kbd-i2c driver has been converted to a new-style i2c driver, we can instantiate the ir_video I2C device by default. The pvr2_disable_ir_video is kept to disable the IR receiver, either because the user doesn't use it, or for debugging purpose. Signed-off-by: Jean Delvare Acked-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 28463489a..694e51f58 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -43,7 +43,7 @@ static int ir_mode[PVR_NUM] = { [0 ... PVR_NUM-1] = 1 }; module_param_array(ir_mode, int, NULL, 0444); MODULE_PARM_DESC(ir_mode,"specify: 0=disable IR reception, 1=normal IR"); -static int pvr2_disable_ir_video = 1; +static int pvr2_disable_ir_video; module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(disable_autoload_ir_video, -- cgit v1.2.3 From 67244363bf89cf9f2e5669d2ec3c582cd07a321c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 15 May 2009 17:32:04 +0000 Subject: patch: s2255drv: adding V4L2_MODE_HIGHQUALITY From: Dean Anderson Adding V4L2_MODE_HIGHQUALITY feature. Signed-off-by: Dean Anderson Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/s2255drv.c | 48 +++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/s2255drv.c b/linux/drivers/media/video/s2255drv.c index 8a939387a..203f6e3ff 100644 --- a/linux/drivers/media/video/s2255drv.c +++ b/linux/drivers/media/video/s2255drv.c @@ -110,6 +110,8 @@ #define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */ #define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */ #define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */ +/* SCALE_4CIFSI is the 2 fields interpolated into one */ +#define SCALE_4CIFSI 4 /* 640x480(NTSC) or 704x576(PAL) high quality */ #define COLOR_YUVPL 1 /* YUV planar */ #define COLOR_YUVPK 2 /* YUV packed */ @@ -239,6 +241,8 @@ struct s2255_dev { struct s2255_mode mode[MAX_CHANNELS]; /* jpeg compression */ struct v4l2_jpegcompression jc[MAX_CHANNELS]; + /* capture parameters (for high quality mode full size) */ + struct v4l2_captureparm cap_parm[MAX_CHANNELS]; const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; int cur_frame[MAX_CHANNELS]; int last_frame[MAX_CHANNELS]; @@ -1021,9 +1025,16 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->type = f->type; norm = norm_minw(fh->dev->vdev[fh->channel]); if (fh->width > norm_minw(fh->dev->vdev[fh->channel])) { - if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) - fh->mode.scale = SCALE_4CIFS; - else + if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) { + if (fh->dev->cap_parm[fh->channel].capturemode & + V4L2_MODE_HIGHQUALITY) { + fh->mode.scale = SCALE_4CIFSI; + dprintk(2, "scale 4CIFSI\n"); + } else { + fh->mode.scale = SCALE_4CIFS; + dprintk(2, "scale 4CIFS\n"); + } + } else fh->mode.scale = SCALE_2CIFS; } else { @@ -1124,6 +1135,7 @@ static u32 get_transfer_size(struct s2255_mode *mode) if (mode->format == FORMAT_NTSC) { switch (mode->scale) { case SCALE_4CIFS: + case SCALE_4CIFSI: linesPerFrame = NUM_LINES_4CIFS_NTSC * 2; pixelsPerLine = LINE_SZ_4CIFS_NTSC; break; @@ -1141,6 +1153,7 @@ static u32 get_transfer_size(struct s2255_mode *mode) } else if (mode->format == FORMAT_PAL) { switch (mode->scale) { case SCALE_4CIFS: + case SCALE_4CIFSI: linesPerFrame = NUM_LINES_4CIFS_PAL * 2; pixelsPerLine = LINE_SZ_4CIFS_PAL; break; @@ -1496,6 +1509,33 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, dprintk(2, "setting jpeg quality %d\n", jc->quality); return 0; } + +static int vidioc_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *sp) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + sp->parm.capture.capturemode = dev->cap_parm[fh->channel].capturemode; + dprintk(2, "getting parm %d\n", sp->parm.capture.capturemode); + return 0; +} + +static int vidioc_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *sp) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + + if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + dev->cap_parm[fh->channel].capturemode = sp->parm.capture.capturemode; + dprintk(2, "setting param capture mode %d\n", + sp->parm.capture.capturemode); + return 0; +} static int s2255_open(struct file *file) { int minor = video_devdata(file)->minor; @@ -1787,6 +1827,8 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = { #endif .vidioc_s_jpegcomp = vidioc_s_jpegcomp, .vidioc_g_jpegcomp = vidioc_g_jpegcomp, + .vidioc_s_parm = vidioc_s_parm, + .vidioc_g_parm = vidioc_g_parm, }; static struct video_device template = { -- cgit v1.2.3 From 9623e5fde7a41395739f4e13f7b218d097d5d93a Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 15 May 2009 20:04:18 -0400 Subject: cx23885: Ensure we specify I/F's for all bandwidths From: Steven Toth cx23885: Ensure we specify I/F's for all bandwidths Priority: normal Signed-off-by: Steven Toth --- linux/drivers/media/video/cx23885/cx23885-dvb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index ba120b9cf..c0095e818 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -125,7 +125,9 @@ static struct tda10048_config hauppauge_hvr1200_config = { .output_mode = TDA10048_SERIAL_OUTPUT, .fwbulkwritelen = TDA10048_BULKWRITE_200, .inversion = TDA10048_INVERSION_ON, - .if_freq_khz = TDA10048_IF_4300, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, .clk_freq_khz = TDA10048_CLK_16000, }; -- cgit v1.2.3 From 9b5c764e4dc2cb4ec07a83f17113b7228dba03f6 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 15 May 2009 20:04:56 -0400 Subject: pvrusb2: Ensure we specify I/F's for all bandwidths From: Steven Toth pvrusb2: Ensure we specify I/F's for all bandwidths Priority: normal Signed-off-by: Steven Toth --- linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 341af4355..336a20ede 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -285,7 +285,9 @@ static struct tda10048_config hauppauge_tda10048_config = { .output_mode = TDA10048_PARALLEL_OUTPUT, .fwbulkwritelen = TDA10048_BULKWRITE_50, .inversion = TDA10048_INVERSION_ON, - .if_freq_khz = TDA10048_IF_4300, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, .clk_freq_khz = TDA10048_CLK_16000, .disable_gate_access = 1, }; -- cgit v1.2.3 From ff417333f92b9ebf9523167136785d69bb73fab6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 16 May 2009 10:00:23 -0400 Subject: cx23885: fix tda10048 IF frequencies for the Hauppauge WinTV-HVR1210 From: Michael Krufky Steve missed the HVR1210 config struct for the TDA10048 in his IF freq patch. Priority: normal Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx23885/cx23885-dvb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index c0095e818..4efc7dee1 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -136,7 +136,9 @@ static struct tda10048_config hauppauge_hvr1210_config = { .output_mode = TDA10048_SERIAL_OUTPUT, .fwbulkwritelen = TDA10048_BULKWRITE_200, .inversion = TDA10048_INVERSION_ON, - .if_freq_khz = TDA10048_IF_4000, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, .clk_freq_khz = TDA10048_CLK_16000, }; -- cgit v1.2.3 From 713eb7e466a32a7c315c799beb83a9d6c51e0e03 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 18 May 2009 02:13:13 +0000 Subject: saa7134-video.c: poll method lose race condition From: figo.zhang saa7134-video.c: poll method lose race condition Signed-off-by: Figo.zhang Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-video.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/saa7134/saa7134-video.c b/linux/drivers/media/video/saa7134/saa7134-video.c index 5f68bed54..26f1727e6 100644 --- a/linux/drivers/media/video/saa7134/saa7134-video.c +++ b/linux/drivers/media/video/saa7134/saa7134-video.c @@ -1423,11 +1423,13 @@ video_poll(struct file *file, struct poll_table_struct *wait) { struct saa7134_fh *fh = file->private_data; struct videobuf_buffer *buf = NULL; + unsigned int rc = 0; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) return videobuf_poll_stream(file, &fh->vbi, wait); if (res_check(fh,RESOURCE_VIDEO)) { + mutex_lock(&fh->cap.vb_lock); if (!list_empty(&fh->cap.stream)) buf = list_entry(fh->cap.stream.next, struct videobuf_buffer, stream); } else { @@ -1446,13 +1448,14 @@ video_poll(struct file *file, struct poll_table_struct *wait) } if (!buf) - return POLLERR; + rc = POLLERR; poll_wait(file, &buf->done, wait); if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + mutex_unlock(&fh->cap.vb_lock); + return rc; err: mutex_unlock(&fh->cap.vb_lock); -- cgit v1.2.3 From 8e9cc981e8c7b756ee8da597dbd9861e86f53cbf Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 18 May 2009 02:31:55 +0000 Subject: minor have assigned value twice From: figo.zhang The variable minor have assigned value twice, the first time is in the initial "video_device" data struct in those drivers, pls see saa7134-video.c,line 2503. --- Signed-off-by: Figo.zhang Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/bt8xx/bttv-driver.c | 1 - linux/drivers/media/video/cx23885/cx23885-417.c | 1 - linux/drivers/media/video/cx88/cx88-core.c | 1 - linux/drivers/media/video/saa7134/saa7134-core.c | 1 - 4 files changed, 4 deletions(-) (limited to 'linux/drivers/media/video') diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c index 622807b54..8d2075186 100644 --- a/linux/drivers/media/video/bt8xx/bttv-driver.c +++ b/linux/drivers/media/video/bt8xx/bttv-driver.c @@ -4198,7 +4198,6 @@ static struct video_device *vdev_init(struct bttv *btv, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; vfd->v4l2_dev = &btv->c.v4l2_dev; vfd->release = video_device_release; vfd->debug = bttv_debug; diff --git a/linux/drivers/media/video/cx23885/cx23885-417.c b/linux/drivers/media/video/cx23885/cx23885-417.c index 574cdb385..9974d9a78 100644 --- a/linux/drivers/media/video/cx23885/cx23885-417.c +++ b/linux/drivers/media/video/cx23885/cx23885-417.c @@ -1749,7 +1749,6 @@ static struct video_device *cx23885_video_dev_alloc( if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, type, cx23885_boards[tsport->dev->board].name); vfd->parent = &pci->dev; diff --git a/linux/drivers/media/video/cx88/cx88-core.c b/linux/drivers/media/video/cx88/cx88-core.c index 39cbd152a..fddba2d51 100644 --- a/linux/drivers/media/video/cx88/cx88-core.c +++ b/linux/drivers/media/video/cx88/cx88-core.c @@ -1057,7 +1057,6 @@ struct video_device *cx88_vdev_init(struct cx88_core *core, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; vfd->v4l2_dev = &core->v4l2_dev; vfd->parent = &pci->dev; vfd->release = video_device_release; diff --git a/linux/drivers/media/video/saa7134/saa7134-core.c b/linux/drivers/media/video/saa7134/saa7134-core.c index 69a214417..dc692d7a7 100644 --- a/linux/drivers/media/video/saa7134/saa7134-core.c +++ b/linux/drivers/media/video/saa7134/saa7134-core.c @@ -836,7 +836,6 @@ static struct video_device *vdev_init(struct saa7134_dev *dev, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; vfd->v4l2_dev = &dev->v4l2_dev; vfd->release = video_device_release; vfd->debug = video_debug; -- cgit v1.2.3