From b9581adab1cc68bac8b1ee446845b0e12a6691a1 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Tue, 28 Mar 2006 21:15:05 +0200 Subject: Support for a new revision of the WT220U-stick From: Patrick Boettcher There seems to be a new version of the USB DVB-T stick from WideView with a new demod-revision inside and thus a new firwmare. This patch enables support for that. Thanks to Mikel Martin for early testing. Signed-off-by: Patrick Boettcher --- linux/drivers/media/dvb/dvb-usb/dtt200u.c | 47 ++++++++++++++++++++++++++- linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 ++ 2 files changed, 48 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/dvb-usb/dtt200u.c b/linux/drivers/media/dvb/dvb-usb/dtt200u.c index b25f65238..b225297d7 100644 --- a/linux/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/linux/drivers/media/dvb/dvb-usb/dtt200u.c @@ -94,12 +94,14 @@ static int dtt200u_frontend_attach(struct dvb_usb_device *d) static struct dvb_usb_properties dtt200u_properties; static struct dvb_usb_properties wt220u_properties; +static struct dvb_usb_properties wt220u_zl0353_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE,NULL) == 0) + dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE,NULL) == 0 || + dvb_usb_device_init(intf,&wt220u_zl0353_properties,THIS_MODULE,NULL) == 0) return 0; return -ENODEV; @@ -110,6 +112,8 @@ static struct usb_device_id dtt200u_usb_table [] = { { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) }, { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD) }, { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_WARM) }, { 0 }, }; MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); @@ -196,6 +200,47 @@ static struct dvb_usb_properties wt220u_properties = { } }; +static struct dvb_usb_properties wt220u_zl0353_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-zl0353-01.fw", + + .power_ctrl = dtt200u_power_ctrl, + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + + .rc_interval = 300, + .rc_key_map = dtt200u_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), + .rc_query = dtt200u_rc_query, + + .generic_bulk_ctrl_endpoint = 0x01, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (based on ZL353)", + .cold_ids = { &dtt200u_usb_table[4], NULL }, + .warm_ids = { &dtt200u_usb_table[5], NULL }, + }, + { NULL }, + } +}; + /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver dtt200u_usb_driver = { #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 4a1b9e77e..cb239049b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -83,6 +83,8 @@ #define USB_PID_DTT200U_WARM 0x0301 #define USB_PID_WT220U_COLD 0x0222 #define USB_PID_WT220U_WARM 0x0221 +#define USB_PID_WT220U_ZL0353_COLD 0x022a +#define USB_PID_WT220U_ZL0353_WARM 0x022b #define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 #define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 #define USB_PID_NEBULA_DIGITV 0x0201 -- cgit v1.2.3 From 903c36ebf540db31e1dc1348e3b13d91ba79faee Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Mar 2006 23:23:48 +0200 Subject: Add wm8739 stereo audio ADC i2c driver From: Hans Verkuil Add support for the Wolfson Microelectronics WM8739 stereo A/D converter from the ivtv driver. Many thanks to Takahiro Adachi for writing the original driver. Signed-off-by: Takahiro Adachi Signed-off-by: Hans Verkuil --- linux/drivers/media/video/Kconfig | 16 +- linux/drivers/media/video/Makefile | 1 + linux/drivers/media/video/wm8739.c | 396 +++++++++++++++++++++++++++++++++++++ 3 files changed, 410 insertions(+), 3 deletions(-) create mode 100644 linux/drivers/media/video/wm8739.c (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 62e71b527..ba64440c2 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -336,15 +336,25 @@ config VIDEO_CS53L32A module will be called cs53l32a config VIDEO_WM8775 - tristate "Wolfson Microelectronics WM8775 audio ADC" + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- - Support for the Wolfson Microelectronics WM8775 - high performance stereo A/D Converter. + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. To compile this driver as a module, choose M here: the module will be called wm8775 +config VIDEO_WM8739 + tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Support for the Wolfson Microelectronics WM8739 + stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8739 + source "drivers/media/video/cx25840/Kconfig" config VIDEO_SAA711X diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 289ef1abf..896619c43 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o obj-$(CONFIG_VIDEO_WM8775) += wm8775.o +obj-$(CONFIG_VIDEO_WM8739) += wm8739.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += saa7111.o tda9840.o tea6415c.o tea6420.o mxb.o diff --git a/linux/drivers/media/video/wm8739.c b/linux/drivers/media/video/wm8739.c new file mode 100644 index 000000000..79394f205 --- /dev/null +++ b/linux/drivers/media/video/wm8739.c @@ -0,0 +1,396 @@ +/* + * wm8739 + * + * Copyright (C) 2005 T. Adachi + * + * Copyright (C) 2005 Hans Verkuil + * - Cleanup + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "compat.h" +#include +#include +#include +#include +#include +#include +#include +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) +#include "i2c-compat.h" +#include +#endif + +MODULE_DESCRIPTION("wm8739 driver"); +MODULE_AUTHOR("T. Adachi, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug = 0; +static unsigned short normal_i2c[] = { 0x34 >> 1, 0x36 >> 1, I2C_CLIENT_END }; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) +module_param(debug, int, 0644); +#else +MODULE_PARM(debug, "i"); +#endif + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) +static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; +#endif + +I2C_CLIENT_INSMOD; + +/* ------------------------------------------------------------------------ */ + +enum { + R0 = 0, R1, + R5 = 5, R6, R7, R8, R9, R15 = 15, + TOT_REGS +}; + +struct wm8739_state { + u32 clock_freq; + u8 muted; + u16 volume; + u16 balance; + u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */ + u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */ +}; + +/* ------------------------------------------------------------------------ */ + +static int wm8739_write(struct i2c_client *client, int reg, u16 val) +{ + int i; + + if (reg < 0 || reg >= TOT_REGS) { + v4l_err(client, "Invalid register R%d\n", reg); + return -1; + } + + v4l_dbg(1, debug, client, "write: %02x %02x\n", reg, val); + + for (i = 0; i < 3; i++) { + if (i2c_smbus_write_byte_data(client, (reg << 1) | + (val >> 8), val & 0xff) == 0) { + return 0; + } + } + v4l_err(client, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +/* write regs to set audio volume etc */ +static void wm8739_set_audio(struct i2c_client *client) +{ + struct wm8739_state *state = i2c_get_clientdata(client); + u16 mute = state->muted ? 0x80 : 0; + + /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB + * Default setting: 0x17 = 0 dB + */ + wm8739_write(client, R0, (state->vol_l & 0x1f) | mute); + wm8739_write(client, R1, (state->vol_r & 0x1f) | mute); +} + +static int wm8739_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct wm8739_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + ctrl->value = state->muted; + break; + + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = state->volume; + break; + + case V4L2_CID_AUDIO_BALANCE: + ctrl->value = state->balance; + break; + + default: + return -EINVAL; + } + return 0; +} + +static int wm8739_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct wm8739_state *state = i2c_get_clientdata(client); + unsigned int work_l, work_r; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + state->muted = ctrl->value; + break; + + case V4L2_CID_AUDIO_VOLUME: + state->volume = ctrl->value; + break; + + case V4L2_CID_AUDIO_BALANCE: + state->balance = ctrl->value; + break; + + default: + return -EINVAL; + } + + /* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */ + work_l = (min(65536 - state->balance, 32768) * state->volume) / 32768; + work_r = (min(state->balance, (u16)32768) * state->volume) / 32768; + + state->vol_l = (long)work_l * 31 / 65535; + state->vol_r = (long)work_r * 31 / 65535; + + /* set audio volume etc. */ + wm8739_set_audio(client); + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static struct v4l2_queryctrl wm8739_qctrl[] = { + { + .id = V4L2_CID_AUDIO_VOLUME, + .name = "Volume", + .minimum = 0, + .maximum = 65535, + .step = 65535/100, + .default_value = 58880, + .flags = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + .flags = 0, + .type = V4L2_CTRL_TYPE_BOOLEAN, + },{ + .id = V4L2_CID_AUDIO_BALANCE, + .name = "Balance", + .minimum = 0, + .maximum = 65535, + .step = 65535/100, + .default_value = 32768, + .flags = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + } +}; + +/* ------------------------------------------------------------------------ */ + +static int wm8739_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + struct wm8739_state *state = i2c_get_clientdata(client); + + switch (cmd) { + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + { + u32 audiofreq = *(u32 *)arg; + + state->clock_freq = audiofreq; + wm8739_write(client, R9, 0x000); /* de-activate */ + switch (audiofreq) { + case 44100: + wm8739_write(client, R8, 0x020); /* 256fps, fs=44.1k */ + break; + case 48000: + wm8739_write(client, R8, 0x000); /* 256fps, fs=48k */ + break; + case 32000: + wm8739_write(client, R8, 0x018); /* 256fps, fs=32k */ + break; + default: + break; + } + wm8739_write(client, R9, 0x001); /* activate */ + break; + } + + case VIDIOC_G_CTRL: + return wm8739_get_ctrl(client, arg); + + case VIDIOC_S_CTRL: + return wm8739_set_ctrl(client, arg); + + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *qc = arg; + int i; + + for (i = 0; i < ARRAY_SIZE(wm8739_qctrl); i++) + if (qc->id && qc->id == wm8739_qctrl[i].id) { + memcpy(qc, &wm8739_qctrl[i], sizeof(*qc)); + return 0; + } + return -EINVAL; + } + + case VIDIOC_LOG_STATUS: + v4l_info(client, "Frequency: %u Hz\n", state->clock_freq); + v4l_info(client, "Volume L: %02x%s\n", state->vol_l & 0x1f, + state->muted ? " (muted)" : ""); + v4l_info(client, "Volume R: %02x%s\n", state->vol_r & 0x1f, + state->muted ? " (muted)" : ""); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static struct i2c_driver i2c_driver; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +static int wm8739_attach(struct i2c_adapter *adapter, int address, int kind) +#else +static int wm8739_attach(struct i2c_adapter *adapter, int address, + unsigned short flags, int kind) +#endif +{ + struct i2c_client *client; + struct wm8739_state *state; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == NULL) + return -ENOMEM; + + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver; +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + client->flags = I2C_CLIENT_ALLOW_USE; +#endif + snprintf(client->name, sizeof(client->name) - 1, "wm8739"); + + v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name); + + state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL); + if (state == NULL) { + kfree(client); + return -ENOMEM; + } + state->vol_l = 0x17; /* 0dB */ + state->vol_r = 0x17; /* 0dB */ + state->muted = 0; + state->balance = 32768; + /* normalize (12dB(31) to -34.5dB(0) [0dB(23)] -> 65535 to 0) */ + state->volume = ((long)state->vol_l + 1) * 65535 / 31; + state->clock_freq = 48000; + i2c_set_clientdata(client, state); + + /* initialize wm8739 */ + wm8739_write(client, R15, 0x00); /* reset */ + wm8739_write(client, R5, 0x000); /* filter setting, high path, offet clear */ + wm8739_write(client, R6, 0x000); /* ADC, OSC, Power Off mode Disable */ + wm8739_write(client, R7, 0x049); /* Digital Audio interface format */ + /* Enable Master mode */ + /* 24 bit, MSB first/left justified */ + wm8739_write(client, R8, 0x000); /* sampling control */ + /* normal, 256fs, 48KHz sampling rate */ + wm8739_write(client, R9, 0x001); /* activate */ + wm8739_set_audio(client); /* set volume/mute */ + + i2c_attach_client(client); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + MOD_INC_USE_COUNT; +#endif + return 0; +} + +static int wm8739_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_CX2341X) +#endif + return i2c_probe(adapter, &addr_data, wm8739_attach); + return 0; +} + +static int wm8739_detach(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) + return err; + + kfree(client); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + MOD_DEC_USE_COUNT; +#endif + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ +static struct i2c_driver i2c_driver = { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .owner = THIS_MODULE, +#endif +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .name = "wm8739", + .flags = I2C_DF_NOTIFY, +#else + .driver = { + .name = "wm8739", + }, +#endif + .id = I2C_DRIVERID_WM8739, + .attach_adapter = wm8739_probe, + .detach_client = wm8739_detach, + .command = wm8739_command, +}; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) +EXPORT_NO_SYMBOLS; +#endif + +static int __init wm8739_init_module(void) +{ + return i2c_add_driver(&i2c_driver); +} + +static void __exit wm8739_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver); +} + +module_init(wm8739_init_module); +module_exit(wm8739_cleanup_module); -- cgit v1.2.3 From a6e71fa22c0c223dd7fd3507737228c848f3bfb0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Mar 2006 23:32:52 +0200 Subject: Don't set msp3400c-non-existent register From: Hans Verkuil The driver tried to set a register that is not present on msp3400c devices. Add the missing test. Signed-off-by: Hans Verkuil --- linux/drivers/media/video/msp3400-driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/msp3400-driver.c b/linux/drivers/media/video/msp3400-driver.c index 65c99edd8..b52e5bdea 100644 --- a/linux/drivers/media/video/msp3400-driver.c +++ b/linux/drivers/media/video/msp3400-driver.c @@ -298,7 +298,8 @@ void msp_set_scart(struct i2c_client *client, int in, int out) msp_write_dsp(client, 0x13, state->acb); /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */ - msp_write_dem(client, 0x40, state->i2s_mode); + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); } void msp_set_mute(struct i2c_client *client) -- cgit v1.2.3 From 4c9a77ace93000ba7b4f10da0e6e6899da6d238b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Mar 2006 01:17:00 -0300 Subject: Tea6420: missing #define (< 2.6.16) From: Darren Salt tea6420: fix missing #define for kernels < 2.6.16 Change set 3653:388da79ac33b broke compilation of tea6420.c on kernels older than 2.6.16. This patch fixes it. Signed-off-by: Darren Salt Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/tea6420.c | 1 + 1 file changed, 1 insertion(+) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/tea6420.c b/linux/drivers/media/video/tea6420.c index 74af061b2..72ed34e08 100644 --- a/linux/drivers/media/video/tea6420.c +++ b/linux/drivers/media/video/tea6420.c @@ -38,6 +38,7 @@ static int debug = 0; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) +#define dprintk(args...) \ do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0) #else #define dprintk(args...) \ -- cgit v1.2.3 From 12836d25828428c8ba891392b0441c3963d0557a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 29 Mar 2006 12:53:15 -0400 Subject: Kconfig: Add firmware download comments for or51211 and or51132 From: Trent Piepho - Added firmware download comments to or51211 and or51132 Kconfig help text. Signed-off-by: Trent Piepho Signed-off-by: Michael Krufky --- linux/drivers/media/dvb/frontends/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig index 94233168d..37d5e0af1 100644 --- a/linux/drivers/media/dvb/frontends/Kconfig +++ b/linux/drivers/media/dvb/frontends/Kconfig @@ -181,6 +181,11 @@ config DVB_OR51211 help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. + This driver needs external firmware. Please use the command + "/Documentation/dvb/get_dvb_firmware or51211" to + download it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + config DVB_OR51132 tristate "Oren OR51132 based" depends on DVB_CORE @@ -189,6 +194,13 @@ config DVB_OR51132 An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. + This driver needs external firmware. Please use the commands + "/Documentation/dvb/get_dvb_firmware or51132_vsb" and/or + "/Documentation/dvb/get_dvb_firmware or51132_qam" to + download firmwares for 8VSB and QAM64/256, respectively. Copy them to + /usr/lib/hotplug/firmware or /lib/firmware (depending on + configuration of firmware hotplug). + config DVB_BCM3510 tristate "Broadcom BCM3510" depends on DVB_CORE -- cgit v1.2.3 From a7aa675c92fa3d11e83bf8990e98fd06e2c95459 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 29 Mar 2006 12:53:49 -0400 Subject: Kconfig: Fix PCI ID typo in VIDEO_CX88_ALSA help text From: Trent Piepho - Fixed PCI ID typo in VIDEO_CX88_ALSA help text Signed-off-by: Trent Piepho Signed-off-by: Michael Krufky --- linux/drivers/media/video/cx88/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/cx88/Kconfig b/linux/drivers/media/video/cx88/Kconfig index ff0f72340..2c586f903 100644 --- a/linux/drivers/media/video/cx88/Kconfig +++ b/linux/drivers/media/video/cx88/Kconfig @@ -25,7 +25,7 @@ config VIDEO_CX88_ALSA It only works with boards with function 01 enabled. To check if your board supports, use lspci -n. - If supported, you should see 1471:8801 or 1471:8811 + If supported, you should see 14f1:8801 or 14f1:8811 PCI device. To compile this driver as a module, choose M here: the -- cgit v1.2.3 From 8cb185c4aa68c43b8b1c9c964c7ab785ecfbb928 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 Mar 2006 19:31:44 +0200 Subject: Fix msp3400c wait time and better audio mode fallbacks From: Hans Verkuil - The wait time until the first time the audio mode was detected was 1+5=6 seconds instead of just 1 second (wrong statement order). msp3400c specific bug. - Implemented audio mode fallback for msp3400c/d just like the msp3400g does automatically. E.g. fallback to stereo if no second language exists, etc. Signed-off-by: Hans Verkuil --- linux/drivers/media/video/msp3400-kthreads.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/msp3400-kthreads.c b/linux/drivers/media/video/msp3400-kthreads.c index 0a9b4a2ba..4b0d6340a 100644 --- a/linux/drivers/media/video/msp3400-kthreads.c +++ b/linux/drivers/media/video/msp3400-kthreads.c @@ -234,6 +234,7 @@ static void msp3400c_set_audmode(struct i2c_client *client) char *modestr = (state->audmode >= 0 && state->audmode < 5) ? strmode[state->audmode] : "unknown"; int src = 0; /* channel source: FM/AM, nicam or SCART */ + int audmode = state->audmode; if (state->opmode == OPMODE_AUTOSELECT) { /* this method would break everything, let's make sure @@ -245,11 +246,22 @@ static void msp3400c_set_audmode(struct i2c_client *client) return; } + /* If no second language is available, switch to the first language */ + if ((audmode == V4L2_TUNER_MODE_LANG2 || + audmode == V4L2_TUNER_MODE_LANG1_LANG2) && + !(state->rxsubchans & V4L2_TUNER_SUB_LANG2)) + audmode = V4L2_TUNER_MODE_LANG1; + /* switch to stereo for stereo transmission, otherwise + keep first language */ + if (audmode == V4L2_TUNER_MODE_LANG1 && + (state->rxsubchans & V4L2_TUNER_SUB_STEREO)) + audmode = V4L2_TUNER_MODE_STEREO; + /* switch demodulator */ switch (state->mode) { case MSP_MODE_FM_TERRA: v4l_dbg(1, msp_debug, client, "FM set_audmode: %s\n", modestr); - switch (state->audmode) { + switch (audmode) { case V4L2_TUNER_MODE_STEREO: msp_write_dsp(client, 0x000e, 0x3001); break; @@ -263,7 +275,7 @@ static void msp3400c_set_audmode(struct i2c_client *client) break; case MSP_MODE_FM_SAT: v4l_dbg(1, msp_debug, client, "SAT set_audmode: %s\n", modestr); - switch (state->audmode) { + switch (audmode) { case V4L2_TUNER_MODE_MONO: msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5)); break; @@ -302,7 +314,7 @@ static void msp3400c_set_audmode(struct i2c_client *client) } /* switch audio */ - switch (state->audmode) { + switch (audmode) { case V4L2_TUNER_MODE_STEREO: case V4L2_TUNER_MODE_LANG1_LANG2: src |= 0x0020; @@ -320,10 +332,6 @@ static void msp3400c_set_audmode(struct i2c_client *client) src = 0x0030; break; case V4L2_TUNER_MODE_LANG1: - /* switch to stereo for stereo transmission, otherwise - keep first language */ - if (state->rxsubchans & V4L2_TUNER_SUB_STEREO) - src |= 0x0020; break; case V4L2_TUNER_MODE_LANG2: src |= 0x0010; @@ -625,9 +633,9 @@ int msp3400c_thread(void *data) if (msp_sleep(state, 1000)) goto restart; while (state->watch_stereo) { + watch_stereo(client); if (msp_sleep(state, 5000)) goto restart; - watch_stereo(client); } } v4l_dbg(1, msp_debug, client, "thread: exit\n"); -- cgit v1.2.3 From 256280a989a5688161c66f97a3e054749875a723 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 Mar 2006 19:56:17 +0200 Subject: Add new NEC uPD64031A and uPD64083 i2c drivers From: Hans Verkuil - Add support for the uPD64031A NEC Electronics Ghost Reduction i2c device - Add support for the uPD6408x NEC Electronics 3-Dimensional Y/C separation i2c device. Signed-off-by: Takahiro Adachi Signed-off-by: Takeru Komoriya Signed-off-by: Hans Verkuil --- linux/drivers/media/video/Kconfig | 37 +++- linux/drivers/media/video/Makefile | 2 + linux/drivers/media/video/upd64031a.c | 324 ++++++++++++++++++++++++++++++++++ linux/drivers/media/video/upd64083.c | 299 +++++++++++++++++++++++++++++++ 4 files changed, 655 insertions(+), 7 deletions(-) create mode 100644 linux/drivers/media/video/upd64031a.c create mode 100644 linux/drivers/media/video/upd64083.c (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index ba64440c2..de8cfebd4 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -300,7 +300,7 @@ config VIDEO_OVCAMCHIP camera drivers. To compile this driver as a module, choose M here: the - module will be called ovcamchip + module will be called ovcamchip. config VIDEO_M32R_AR tristate "AR devices" @@ -323,7 +323,7 @@ config VIDEO_MSP3400 Support for the Micronas MSP34xx series of audio decoders. To compile this driver as a module, choose M here: the - module will be called msp3400 + module will be called msp3400. config VIDEO_CS53L32A tristate "Cirrus Logic CS53L32A audio ADC" @@ -333,7 +333,7 @@ config VIDEO_CS53L32A stereo A/D converter. To compile this driver as a module, choose M here: the - module will be called cs53l32a + module will be called cs53l32a. config VIDEO_WM8775 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" @@ -343,7 +343,7 @@ config VIDEO_WM8775 performance stereo A/D Converter with a 4 channel input mixer. To compile this driver as a module, choose M here: the - module will be called wm8775 + module will be called wm8775. config VIDEO_WM8739 tristate "Wolfson Microelectronics WM8739 stereo audio ADC" @@ -353,7 +353,7 @@ config VIDEO_WM8739 stereo A/D Converter. To compile this driver as a module, choose M here: the - module will be called wm8739 + module will be called wm8739. source "drivers/media/video/cx25840/Kconfig" @@ -364,7 +364,7 @@ config VIDEO_SAA711X Support for the Philips SAA7113/4/5 video decoders. To compile this driver as a module, choose M here: the - module will be called saa7115 + module will be called saa7115. config VIDEO_SAA7127 tristate "Philips SAA7127/9 digital video encoders" @@ -373,7 +373,30 @@ config VIDEO_SAA7127 Support for the Philips SAA7127/9 digital video encoders. To compile this driver as a module, choose M here: the - module will be called saa7127 + module will be called saa7127. + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. # # USB Multimedia device configuration diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 896619c43..593933b69 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o +obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o +obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o zc0301-objs := zc0301_core.o zc0301_pas202bcb.o diff --git a/linux/drivers/media/video/upd64031a.c b/linux/drivers/media/video/upd64031a.c new file mode 100644 index 000000000..5ca6497cd --- /dev/null +++ b/linux/drivers/media/video/upd64031a.c @@ -0,0 +1,324 @@ +/* + * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan + * + * 2003 by T.Adachi + * 2003 by Takeru KOMORIYA + * 2006 by Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "compat.h" + +#include +#include +#include +#include +#include +#include +#include + +// --------------------- read registers functions define ----------------------- + +/* bit masks */ +#define GR_MODE_MASK 0xc0 +#define DIRECT_3DYCS_CONNECT_MASK 0xc0 +#define SYNC_CIRCUIT_MASK 0xa0 + +// ----------------------------------------------------------------------------- + +MODULE_DESCRIPTION("uPD64031A driver"); +MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug = 0; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +module_param(debug, int, 0644); +#else +MODULE_PARM(debug, "i"); +#endif + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +static unsigned short normal_i2c[] = { 0x24 >> 1, 0x26 >> 1, I2C_CLIENT_END }; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) +static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; +#endif + +I2C_CLIENT_INSMOD; + +enum { + R00 = 0, R01, R02, R03, R04, + R05, R06, R07, R08, R09, + R0A, R0B, R0C, R0D, R0E, R0F, + /* unused registers + R10, R11, R12, R13, R14, + R15, R16, R17, + */ + TOT_REGS +}; + +struct upd64031a_state { + u8 regs[TOT_REGS]; + u8 gr_mode; + u8 direct_3dycs_connect; + u8 ext_comp_sync; + u8 ext_vert_sync; +}; + +static u8 upd64031a_init[] = { + 0x00, 0xb8, 0x48, 0xd2, 0xe6, + 0x03, 0x10, 0x0b, 0xaf, 0x7f, + 0x00, 0x00, 0x1d, 0x5e, 0x00, + 0xd0 +}; + +/* ------------------------------------------------------------------------ */ + +static u8 upd64031a_read(struct i2c_client *client, u8 reg) +{ + u8 buf[2]; + + if (reg >= sizeof(buf)) + return 0xff; + i2c_master_recv(client, buf, 2); + return buf[reg]; +} + +/* ------------------------------------------------------------------------ */ + +static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val) +{ + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + v4l_dbg(1, debug, client, "writing reg addr: %02X val: %02X\n", reg, val); + if (i2c_master_send(client, buf, 2) != 2) + v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val); +} + +/* ------------------------------------------------------------------------ */ + +/* The input changed due to new input or channel changed */ +static void upd64031a_change(struct i2c_client *client) +{ + struct upd64031a_state *state = i2c_get_clientdata(client); + u8 reg = state->regs[R00]; + + v4l_dbg(1, debug, client, "changed input or channel\n"); + upd64031a_write(client, R00, reg | 0x10); + upd64031a_write(client, R00, reg & ~0x10); +} + +/* ------------------------------------------------------------------------ */ + +static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + struct upd64031a_state *state = i2c_get_clientdata(client); + struct v4l2_routing *route = arg; + + switch (cmd) { + case VIDIOC_S_FREQUENCY: + upd64031a_change(client); + break; + + case VIDIOC_INT_G_VIDEO_ROUTING: + route->input = (state->gr_mode >> 6) | + (state->direct_3dycs_connect >> 4) | + (state->ext_comp_sync >> 1) | + (state->ext_vert_sync >> 2); + route->output = 0; + break; + + case VIDIOC_INT_S_VIDEO_ROUTING: + { + u8 r00, r05, r08; + + state->gr_mode = (route->input & 3) << 6; + state->direct_3dycs_connect = (route->input & 0xc) << 4; + state->ext_comp_sync = (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1; + state->ext_vert_sync = (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2; + r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode; + r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) | + state->ext_comp_sync | state->ext_vert_sync; + r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) | + state->direct_3dycs_connect; + upd64031a_write(client, R00, r00); + upd64031a_write(client, R05, r05); + upd64031a_write(client, R08, r08); + upd64031a_change(client); + break; + } + + case VIDIOC_LOG_STATUS: + v4l_info(client, "Status: SA00=0x%02x SA01=0x%02x\n", + upd64031a_read(client, 0), upd64031a_read(client, 1)); + break; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_UPD64031A) + return -EINVAL; + reg->val = upd64031a_read(client, reg->reg & 0xff); + break; + } + + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + u8 addr = reg->reg & 0xff; + u8 val = reg->val & 0xff; + + if (reg->i2c_id != I2C_DRIVERID_UPD64031A) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + upd64031a_write(client, addr, val); + break; + } +#endif + + default: + break; + } + return 0; +} + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static struct i2c_driver i2c_driver; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +static int upd64031a_attach(struct i2c_adapter *adapter, int address, int kind) +#else +static int upd64031a_attach(struct i2c_adapter *adapter, int address, + unsigned short flags, int kind) +#endif +{ + struct i2c_client *client; + struct upd64031a_state *state; + int i; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == NULL) { + return -ENOMEM; + } + + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver; +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + client->flags = I2C_CLIENT_ALLOW_USE; +#endif + snprintf(client->name, sizeof(client->name) - 1, "uPD64031A"); + + v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name); + + state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL); + if (state == NULL) { + kfree(client); + return -ENOMEM; + } + i2c_set_clientdata(client, state); + memcpy(state->regs, upd64031a_init, sizeof(state->regs)); + state->gr_mode = UPD64031A_GR_ON << 6; + state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4; + state->ext_comp_sync = state->ext_vert_sync = 0; + for (i = 0; i < TOT_REGS; i++) { + upd64031a_write(client, i, state->regs[i]); + } + + i2c_attach_client(client); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + MOD_INC_USE_COUNT; +#endif + return 0; +} + +static int upd64031a_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, upd64031a_attach); + return 0; +} + +static int upd64031a_detach(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) + return err; + + kfree(client); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + MOD_DEC_USE_COUNT; +#endif + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ +static struct i2c_driver i2c_driver = { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .owner = THIS_MODULE, +#endif +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .name = "upd64031a", + .flags = I2C_DF_NOTIFY, +#else + .driver = { + .name = "upd64031a", + }, +#endif + .id = I2C_DRIVERID_UPD64031A, + .attach_adapter = upd64031a_probe, + .detach_client = upd64031a_detach, + .command = upd64031a_command, +}; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +EXPORT_NO_SYMBOLS; +#endif + +static int __init upd64031a_init_module(void) +{ + return i2c_add_driver(&i2c_driver); +} + +static void __exit upd64031a_exit_module(void) +{ + i2c_del_driver(&i2c_driver); +} + +module_init(upd64031a_init_module); +module_exit(upd64031a_exit_module); + diff --git a/linux/drivers/media/video/upd64083.c b/linux/drivers/media/video/upd64083.c new file mode 100644 index 000000000..861d9b114 --- /dev/null +++ b/linux/drivers/media/video/upd64083.c @@ -0,0 +1,299 @@ +/* + * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver + * + * 2003 by T.Adachi (tadachi@tadachi-net.com) + * 2003 by Takeru KOMORIYA + * 2006 by Hans Verkuil + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include "compat.h" +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("uPD64083 driver"); +MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug = 0; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) +module_param(debug, bool, 0644); +#else +MODULE_PARM(debug, "i"); +#endif + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +static unsigned short normal_i2c[] = { 0xb8 >> 1, 0xba >> 1, I2C_CLIENT_END }; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) +static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; +#endif + +I2C_CLIENT_INSMOD; + +enum { + R00 = 0, R01, R02, R03, R04, + R05, R06, R07, R08, R09, + R0A, R0B, R0C, R0D, R0E, R0F, + R10, R11, R12, R13, R14, + R15, R16, + TOT_REGS +}; + +struct upd64083_state { + u8 mode; + u8 ext_y_adc; + u8 regs[TOT_REGS]; +}; + +/* Initial values when used in combination with the + NEC upd64031a ghost reduction chip. */ +static u8 upd64083_init[] = { + 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */ + 0x36, 0xdd, 0x05, 0x56, 0x48, + 0x00, 0x3a, 0xa0, 0x05, 0x08, + 0x44, 0x60, 0x08, 0x52, 0xf8, + 0x53, 0x60, 0x10 +}; + +/* ------------------------------------------------------------------------ */ + +static void upd64083_log_status(struct i2c_client *client) +{ + u8 buf[7]; + + i2c_master_recv(client, buf, 7); + v4l_info(client, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x " + "SA04=%02x SA05=%02x SA06=%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); +} + +/* ------------------------------------------------------------------------ */ + +static void upd64083_write(struct i2c_client *client, u8 reg, u8 val) +{ + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + v4l_dbg(1, debug, client, "writing reg addr: %02x val: %02x\n", reg, val); + if (i2c_master_send(client, buf, 2) != 2) + v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val); +} + +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 upd64083_read(struct i2c_client *client, u8 reg) +{ + u8 buf[7]; + + if (reg >= sizeof(buf)) + return 0xff; + i2c_master_recv(client, buf, sizeof(buf)); + return buf[reg]; +} +#endif + +/* ------------------------------------------------------------------------ */ + +static int upd64083_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + struct upd64083_state *state = i2c_get_clientdata(client); + struct v4l2_routing *route = arg; + + switch (cmd) { + case VIDIOC_INT_G_VIDEO_ROUTING: + route->input = (state->mode >> 6) | (state->ext_y_adc >> 3); + route->output = 0; + break; + + case VIDIOC_INT_S_VIDEO_ROUTING: + { + u8 r00, r02; + + if (route->input > 7 || (route->input & 6) == 6) + return -EINVAL; + state->mode = (route->input & 3) << 6; + state->ext_y_adc = (route->input & UPD64083_EXT_Y_ADC) << 3; + r00 = (state->regs[R00] & ~(3 << 6)) | state->mode; + r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc; + upd64083_write(client, R00, r00); + upd64083_write(client, R02, r02); + break; + } + + case VIDIOC_LOG_STATUS: + upd64083_log_status(client); + break; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_UPD64083) + return -EINVAL; + reg->val = upd64083_read(client, reg->reg & 0xff); + break; + } + + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + u8 addr = reg->reg & 0xff; + u8 val = reg->val & 0xff; + + if (reg->i2c_id != I2C_DRIVERID_UPD64083) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + upd64083_write(client, addr, val); + break; + } +#endif + default: + break; + } + + return 0; +} + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static struct i2c_driver i2c_driver; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +static int upd64083_attach(struct i2c_adapter *adapter, int address, int kind) +#else +static int upd64083_attach(struct i2c_adapter *adapter, int address, + unsigned short flags, int kind) +#endif +{ + struct i2c_client *client; + struct upd64083_state *state; + int i; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == NULL) { + return -ENOMEM; + } + + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver; +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + client->flags = I2C_CLIENT_ALLOW_USE; +#endif + snprintf(client->name, sizeof(client->name) - 1, "uPD64083"); + + v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name); + + state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL); + if (state == NULL) { + kfree(client); + return -ENOMEM; + } + i2c_set_clientdata(client, state); + /* Initially assume that a ghost reduction chip is present */ + state->mode = 0; /* YCS mode */ + state->ext_y_adc = (1 << 5); + memcpy(state->regs, upd64083_init, TOT_REGS); + for (i = 0; i < TOT_REGS; i++) { + upd64083_write(client, i, state->regs[i]); + } + i2c_attach_client(client); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + MOD_INC_USE_COUNT; +#endif + return 0; +} + +static int upd64083_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, upd64083_attach); + return 0; +} + +static int upd64083_detach(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) + return err; + + kfree(client); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + MOD_DEC_USE_COUNT; +#endif + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ +static struct i2c_driver i2c_driver = { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .owner = THIS_MODULE, +#endif +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .name = "upd64083", + .flags = I2C_DF_NOTIFY, +#else + .driver = { + .name = "upd64083", + }, +#endif + .id = I2C_DRIVERID_UPD64083, + .attach_adapter = upd64083_probe, + .detach_client = upd64083_detach, + .command = upd64083_command, +}; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +EXPORT_NO_SYMBOLS; +#endif + +static int __init upd64083_init_module(void) +{ + return i2c_add_driver(&i2c_driver); +} + +static void __exit upd64083_exit_module(void) +{ + i2c_del_driver(&i2c_driver); +} + +module_init(upd64083_init_module); +module_exit(upd64083_exit_module); -- cgit v1.2.3 From f8f26c1536f4aa9e1329fb70979cdab63fdda0c0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 Mar 2006 20:16:08 +0200 Subject: Remove trailing newlines From: Hans Verkuil Signed-off-by: Hans Verkuil --- linux/drivers/media/video/upd64031a.c | 1 - 1 file changed, 1 deletion(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/upd64031a.c b/linux/drivers/media/video/upd64031a.c index 5ca6497cd..66254bad4 100644 --- a/linux/drivers/media/video/upd64031a.c +++ b/linux/drivers/media/video/upd64031a.c @@ -321,4 +321,3 @@ static void __exit upd64031a_exit_module(void) module_init(upd64031a_init_module); module_exit(upd64031a_exit_module); - -- cgit v1.2.3 From 6c7054ea82d8b4745c6293b852813671bbf8b5ba Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Mar 2006 15:19:26 -0300 Subject: zmalloc changed to kzmalloc; semaphore to mutex From: Mauro Carvalho Chehab kernel-sync Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/dpc7146.c | 3 +-- linux/drivers/media/video/hexium_gemini.c | 3 +-- linux/drivers/media/video/hexium_orion.c | 5 ++--- linux/drivers/media/video/mxb.c | 9 ++++----- linux/drivers/media/video/tea6420.c | 3 +-- 5 files changed, 9 insertions(+), 14 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/dpc7146.c b/linux/drivers/media/video/dpc7146.c index 5cce40af6..3ee2cc6e3 100644 --- a/linux/drivers/media/video/dpc7146.c +++ b/linux/drivers/media/video/dpc7146.c @@ -95,12 +95,11 @@ static int dpc_probe(struct saa7146_dev* dev) struct i2c_client *client; struct list_head *item; - dpc = (struct dpc*)kmalloc(sizeof(struct dpc), GFP_KERNEL); + dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL); if( NULL == dpc ) { printk("dpc_v4l2.o: dpc_probe: not enough kernel memory.\n"); return -ENOMEM; } - memset(dpc, 0x0, sizeof(struct dpc)); /* FIXME: enable i2c-port pins, video-port-pins video port pins should be enabled here ?! */ diff --git a/linux/drivers/media/video/hexium_gemini.c b/linux/drivers/media/video/hexium_gemini.c index 24ae47cff..6cc7ca99d 100644 --- a/linux/drivers/media/video/hexium_gemini.c +++ b/linux/drivers/media/video/hexium_gemini.c @@ -241,12 +241,11 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d DEB_EE((".\n")); - hexium = (struct hexium *) kmalloc(sizeof(struct hexium), GFP_KERNEL); + hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL); if (NULL == hexium) { printk("hexium_gemini: not enough kernel memory in hexium_attach().\n"); return -ENOMEM; } - memset(hexium, 0x0, sizeof(struct hexium)); dev->ext_priv = hexium; /* enable i2c-port pins */ diff --git a/linux/drivers/media/video/hexium_orion.c b/linux/drivers/media/video/hexium_orion.c index 776eeea1b..59ed0dfd2 100644 --- a/linux/drivers/media/video/hexium_orion.c +++ b/linux/drivers/media/video/hexium_orion.c @@ -225,12 +225,11 @@ static int hexium_probe(struct saa7146_dev *dev) return -EFAULT; } - hexium = (struct hexium *) kmalloc(sizeof(struct hexium), GFP_KERNEL); + hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL); if (NULL == hexium) { printk("hexium_orion: hexium_probe: not enough kernel memory.\n"); return -ENOMEM; } - memset(hexium, 0x0, sizeof(struct hexium)); /* enable i2c-port pins */ saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); @@ -486,7 +485,7 @@ static struct saa7146_ext_vv vv_data = { }; static struct saa7146_extension extension = { - .name = "hexium HV-PCI6/Orion", + .name = "hexium HV-PCI6 Orion", .flags = 0, // SAA7146_USE_I2C_IRQ, .pci_tbl = &pci_tbl[0], diff --git a/linux/drivers/media/video/mxb.c b/linux/drivers/media/video/mxb.c index 615cc0a1d..37d3f33b7 100644 --- a/linux/drivers/media/video/mxb.c +++ b/linux/drivers/media/video/mxb.c @@ -26,8 +26,8 @@ #include "compat.h" #include #include -#include #include +#include #include "mxb.h" #include "tea6415c.h" @@ -178,12 +178,11 @@ static int mxb_probe(struct saa7146_dev* dev) return -ENODEV; } - mxb = (struct mxb*)kmalloc(sizeof(struct mxb), GFP_KERNEL); + mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); if( NULL == mxb ) { DEB_D(("not enough kernel memory.\n")); return -ENOMEM; } - memset(mxb, 0x0, sizeof(struct mxb)); mxb->i2c_adapter = (struct i2c_adapter) { .class = I2C_CLASS_TV_ANALOG, @@ -631,9 +630,9 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) } /* fixme: locke das setzen des inputs mit hilfe des mutexes - down(&dev->lock); + mutex_lock(&dev->lock); video_mux(dev,*i); - up(&dev->lock); + mutex_unlock(&dev->lock); */ /* fixme: check if streaming capture diff --git a/linux/drivers/media/video/tea6420.c b/linux/drivers/media/video/tea6420.c index 72ed34e08..9896661da 100644 --- a/linux/drivers/media/video/tea6420.c +++ b/linux/drivers/media/video/tea6420.c @@ -109,11 +109,10 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) } /* allocate memory for client structure */ - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (0 == client) { return -ENOMEM; } - memset(client, 0x0, sizeof(struct i2c_client)); /* fill client structure */ memcpy(client, &client_template, sizeof(struct i2c_client)); -- cgit v1.2.3 From d2f9849264786f56967fb28a66a295c79c29b322 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Mar 2006 15:25:00 -0300 Subject: Several improvements at Kconfig menu by mkrufky From: Mauro Carvalho Chehab merge: from -git tree (changesets 3653a to 3653g) Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/Kconfig | 168 ++++--------------------------------- linux/drivers/media/video/Makefile | 3 - 2 files changed, 16 insertions(+), 155 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 62e71b527..612096aec 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -316,6 +316,13 @@ config VIDEO_M32R_AR_M64278 Say Y here to use the Renesas M64278E-800 camera module, which supports VGA(640x480 pixcels) size of images. +# +# Encoder / Decoder module configuration +# + +menu "Encoders and Decoders" + depends on VIDEO_DEV + config VIDEO_MSP3400 tristate "Micronas MSP34xx audio decoders" depends on VIDEO_DEV && I2C @@ -365,6 +372,8 @@ config VIDEO_SAA7127 To compile this driver as a module, choose M here: the module will be called saa7127 +endmenu # encoder / decoder chips + # # USB Multimedia device configuration # @@ -376,20 +385,6 @@ source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" -config USB_VICAM - tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" - depends on USB && VIDEO_DEV && EXPERIMENTAL - ---help--- - Say Y here if you have 3com homeconnect camera (vicam). - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Multimedia Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at . - - To compile this driver as a module, choose M here: the - module will be called vicam. - config USB_DSBR tristate "D-Link USB FM radio support (EXPERIMENTAL)" depends on USB && VIDEO_DEV && EXPERIMENTAL @@ -399,66 +394,12 @@ config USB_DSBR you must connect the line out connector to a sound card or a set of speakers. - This driver uses the Video For Linux API. You must enable - (Y or M in config) Video For Linux (under Character Devices) - to use this driver. Information on this API and pointers to - "v4l" programs may be found at - . - To compile this driver as a module, choose M here: the module will be called dsbr100. -config USB_ET61X251 - tristate "USB ET61X[12]51 PC Camera Controller support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for cameras based on Etoms ET61X151 - or ET61X251 PC Camera Controllers. +source "drivers/media/video/usbvideo/Kconfig" - See for more informations. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. - - To compile this driver as a module, choose M here: the - module will be called et61x251. - -config USB_IBMCAM - tristate "USB IBM (Xirlink) C-it Camera support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want to connect a IBM "C-It" camera, also known as - "Xirlink PC Camera" to your computer's USB port. For more - information, read . - - This driver uses the Video For Linux API. You must enable - (Y or M in config) Video For Linux (under Character Devices) - to use this driver. Information on this API and pointers to - "v4l" programs may be found at - . - - To compile this driver as a module, choose M here: the - module will be called ibmcam. - - This camera has several configuration options which - can be specified when you load the module. Read - to learn more. - -config USB_KONICAWC - tristate "USB Konica Webcam support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for webcams based on a Konica - chipset. This is known to work with the Intel YC76 webcam. - - This driver uses the Video For Linux API. You must enable - (Y or M in config) Video For Linux (under Character Devices) - to use this driver. Information on this API and pointers to - "v4l" programs may be found at - . - - To compile this driver as a module, choose M here: the - module will be called konicawc. +source "drivers/media/video/et61x251/Kconfig" config USB_OV511 tristate "USB OV511 Camera support" @@ -468,11 +409,6 @@ config USB_OV511 computer's USB port. See for more information and for a list of supported cameras. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Character Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at . - To compile this driver as a module, choose M here: the module will be called ov511. @@ -484,28 +420,10 @@ config USB_SE401 computer's USB port. See for more information and for a list of supported cameras. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Multimedia Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at . - To compile this driver as a module, choose M here: the module will be called se401. -config USB_SN9C102 - tristate "USB SN9C10x PC Camera Controller support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for cameras based on SONiX SN9C101, - SN9C102 or SN9C103 PC Camera Controllers. - - See for more informations. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. - - To compile this driver as a module, choose M here: the - module will be called sn9c102. +source "drivers/media/video/sn9c102/Kconfig" config USB_STV680 tristate "USB STV680 (Pencam) Camera support" @@ -516,17 +434,13 @@ config USB_STV680 See for more information and for a list of supported cameras. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Multimedia Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at . - To compile this driver as a module, choose M here: the module will be called stv680. config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support" - depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP + depends on USB && VIDEO_DEV && I2C + select VIDEO_OVCAMCHIP ---help--- Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. @@ -538,62 +452,12 @@ config USB_W9968CF See for more informations. - This driver uses the Video For Linux and the I2C APIs. It needs the - OmniVision Camera Chip support as well. You must say Y or M to - "Video For Linux", "I2C Support" and "OmniVision Camera Chip - support" to use this driver. - To compile this driver as a module, choose M here: the module will be called w9968cf. -config USB_ZC0301 - tristate "USB ZC0301 Image Processor and Control Chip support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for cameras based on the ZC0301 - Image Processor and Control Chip. - - See for more informations. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. +source "drivers/media/video/zc0301/Kconfig" - To compile this driver as a module, choose M here: the - module will be called zc0301. - -config USB_PWC - tristate "USB Philips Cameras" - depends on USB && VIDEO_DEV - ---help--- - Say Y or M here if you want to use one of these Philips & OEM - webcams: - * Philips PCA645, PCA646 - * Philips PCVC675, PCVC680, PCVC690 - * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 - * Askey VC010 - * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' - and 'Orbit'/'Sphere' - * Samsung MPC-C10, MPC-C30 - * Creative Webcam 5, Pro Ex - * SOTEC Afina Eye - * Visionite VCS-UC300, VCS-UM100 - - The PCA635, PCVC665 and PCVC720/20 are not supported by this driver - and never will be, but the 665 and 720/20 are supported by other - drivers. - - See for more information and - installation instructions. - - The built-in microphone is enabled by selecting USB Audio support. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Character Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at . - - To compile this driver as a module, choose M here: the - module will be called pwc. +source "drivers/media/video/pwc/Kconfig" endmenu # V4L USB devices diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 289ef1abf..14219217d 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -66,9 +66,6 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o -et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o -zc0301-objs := zc0301_core.o zc0301_pas202bcb.o - obj-$(CONFIG_USB_DABUSB) += dabusb.o obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_OV511) += ov511.o -- cgit v1.2.3 From f55b2be52b11947513cc6fc58b8ec2e5b3bea3e3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Mar 2006 18:06:26 -0300 Subject: Kernel-sync changes to -git From: Mauro Carvalho Chehab kernel-sync Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/cpia2/cpia2.h | 2 +- linux/drivers/media/video/saa711x.c | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/cpia2/cpia2.h b/linux/drivers/media/video/cpia2/cpia2.h index a53056c82..7480c1827 100644 --- a/linux/drivers/media/video/cpia2/cpia2.h +++ b/linux/drivers/media/video/cpia2/cpia2.h @@ -462,7 +462,7 @@ int cpia2_init_camera(struct camera_data *cam); int cpia2_allocate_buffers(struct camera_data *cam); void cpia2_free_buffers(struct camera_data *cam); long cpia2_read(struct camera_data *cam, - char *buf, unsigned long count, int noblock); + char __user *buf, unsigned long count, int noblock); unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, poll_table *wait); int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma); diff --git a/linux/drivers/media/video/saa711x.c b/linux/drivers/media/video/saa711x.c index f51cd9442..59425506e 100644 --- a/linux/drivers/media/video/saa711x.c +++ b/linux/drivers/media/video/saa711x.c @@ -46,7 +46,6 @@ MODULE_AUTHOR("Dave Perks, Jose Ignacio Gijon, Joerg Heckenbach, Mark McClelland MODULE_LICENSE("GPL"); #include -#include #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) #include "i2c-compat.h" #endif -- cgit v1.2.3 From 35c5ecc171a4a76c0a7a35e23e0ac2d25caa91ae Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 30 Mar 2006 03:05:16 +0200 Subject: Configurable dma buffer size for saa7146-based budget dvb cards From: Ingo Schneider - Issue a warning when more than 80% of the DMA buffer is being used (probably due to bad IRQ latency). Warnings are rate-limited. - Introduce a new parameter 'bufsize' (in KByte) which increases the default DMA buffer of 188 KByte up to 1410 KByte (Activy: 564 KByte). Signed-off-by: Ingo Schneider Signed-off-by: Oliver Endriss --- linux/drivers/media/dvb/ttpci/budget-core.c | 78 ++++++++++++++++++++++------ linux/drivers/media/dvb/ttpci/budget-patch.c | 24 ++++----- linux/drivers/media/dvb/ttpci/budget.h | 13 ++--- 3 files changed, 82 insertions(+), 33 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/ttpci/budget-core.c b/linux/drivers/media/dvb/ttpci/budget-core.c index 633e68c34..ea2066d46 100644 --- a/linux/drivers/media/dvb/ttpci/budget-core.c +++ b/linux/drivers/media/dvb/ttpci/budget-core.c @@ -39,9 +39,21 @@ #include "budget.h" #include "ttpci-eeprom.h" +#define TS_WIDTH (2 * TS_SIZE) +#define TS_WIDTH_ACTIVY TS_SIZE +#define TS_HEIGHT_MASK 0xf00 +#define TS_HEIGHT_MASK_ACTIVY 0xc00 +#define TS_MIN_BUFSIZE_K 188 +#define TS_MAX_BUFSIZE_K 1410 +#define TS_MAX_BUFSIZE_K_ACTIVY 564 +#define BUFFER_WARNING_WAIT (30*HZ) + int budget_debug; +static int dma_buffer_size = TS_MIN_BUFSIZE_K; module_param_named(debug, budget_debug, int, 0644); +module_param_named(bufsize, dma_buffer_size, int, 0444); MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); +MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); /**************************************************************************** * TT budget / WinTV Nova @@ -70,11 +82,10 @@ static int start_ts_capture(struct budget *budget) saa7146_write(dev, MC1, MASK_20); // DMA3 off - memset(budget->grabbing, 0x00, TS_HEIGHT * TS_WIDTH); + memset(budget->grabbing, 0x00, budget->buffer_size); saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); - budget->tsf = 0xff; budget->ttbp = 0; /* @@ -115,16 +126,12 @@ static int start_ts_capture(struct budget *budget) saa7146_write(dev, BASE_ODD3, 0); saa7146_write(dev, BASE_EVEN3, 0); - saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT); + saa7146_write(dev, PROT_ADDR3, budget->buffer_size); saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90); - if (budget->card->type == BUDGET_FS_ACTIVY) { - saa7146_write(dev, PITCH3, TS_WIDTH / 2); - saa7146_write(dev, NUM_LINE_BYTE3, ((TS_HEIGHT * 2) << 16) | (TS_WIDTH / 2)); - } else { - saa7146_write(dev, PITCH3, TS_WIDTH); - saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH); - } + saa7146_write(dev, PITCH3, budget->buffer_width); + saa7146_write(dev, NUM_LINE_BYTE3, + (budget->buffer_height << 16) | budget->buffer_width); saa7146_write(dev, MC2, (MASK_04 | MASK_20)); @@ -141,11 +148,12 @@ static void vpeirq(unsigned long data) u8 *mem = (u8 *) (budget->grabbing); u32 olddma = budget->ttbp; u32 newdma = saa7146_read(budget->dev, PCI_VDP3); + u32 count; /* nearest lower position divisible by 188 */ newdma -= newdma % 188; - if (newdma >= TS_BUFLEN) + if (newdma >= budget->buffer_size) return; budget->ttbp = newdma; @@ -154,11 +162,24 @@ static void vpeirq(unsigned long data) return; if (newdma > olddma) { /* no wraparound, dump olddma..newdma */ - dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, (newdma - olddma) / 188); + count = newdma - olddma; + dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); } else { /* wraparound, dump olddma..buflen and 0..newdma */ - dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, (TS_BUFLEN - olddma) / 188); + count = budget->buffer_size - olddma; + dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); + count += newdma; dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188); } + + if (count > budget->buffer_warning_threshold) + budget->buffer_warnings++; + + if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) { + printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", + budget->dev->name, __FUNCTION__, budget->buffer_warnings, count); + budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT; + budget->buffer_warnings = 0; + } } @@ -341,9 +362,10 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, struct saa7146_pci_extension_data *info, struct module *owner) { - int length = TS_WIDTH * TS_HEIGHT; int ret = 0; struct budget_info *bi = info->ext_priv; + int max_bufsize; + int height_mask; memset(budget, 0, sizeof(struct budget)); @@ -352,6 +374,32 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, budget->card = bi; budget->dev = (struct saa7146_dev *) dev; + if (budget->card->type == BUDGET_FS_ACTIVY) { + budget->buffer_width = TS_WIDTH_ACTIVY; + max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY; + height_mask = TS_HEIGHT_MASK_ACTIVY; + } else { + budget->buffer_width = TS_WIDTH; + max_bufsize = TS_MAX_BUFSIZE_K; + height_mask = TS_HEIGHT_MASK; + } + + if (dma_buffer_size < TS_MIN_BUFSIZE_K) + dma_buffer_size = TS_MIN_BUFSIZE_K; + else if (dma_buffer_size > max_bufsize) + dma_buffer_size = max_bufsize; + + budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width; + budget->buffer_height &= height_mask; + budget->buffer_size = budget->buffer_height * budget->buffer_width; + budget->buffer_warning_threshold = budget->buffer_size * 80/100; + budget->buffer_warnings = 0; + budget->buffer_warning_time = jiffies; + + dprintk(2, "%s: width = %d, height = %d\n", + budget->dev->name, budget->buffer_width, budget->buffer_height); + printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); + dvb_register_adapter(&budget->dvb_adapter, budget->card->name, owner); /* set dd1 stream a & b */ @@ -392,7 +440,7 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac); if (NULL == - (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, length, &budget->pt))) { + (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt))) { ret = -ENOMEM; goto err; } diff --git a/linux/drivers/media/dvb/ttpci/budget-patch.c b/linux/drivers/media/dvb/ttpci/budget-patch.c index 5ea95da4f..25e40fc1f 100644 --- a/linux/drivers/media/dvb/ttpci/budget-patch.c +++ b/linux/drivers/media/dvb/ttpci/budget-patch.c @@ -577,6 +577,17 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // Set RPS1 Address register to point to RPS code (r108 p42) saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + + if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL))) + return -ENOMEM; + + dprintk(2, "budget: %p\n", budget); + + if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { + kfree (budget); + return err; + } + // Set Source Line Counter Threshold, using BRS (rCC p43) // It generates HS event every TS_HEIGHT lines // this is related to TS_WIDTH set in register @@ -585,24 +596,13 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte //,then RPS_THRESH1 // should be set to trigger every TS_HEIGHT (512) lines. // - saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 ); + saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 ); // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 ); // Enable RPS1 (rFC p33) saa7146_write(dev, MC1, (MASK_13 | MASK_29)); - if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL))) - return -ENOMEM; - - dprintk(2, "budget: %p\n", budget); - - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { - kfree (budget); - return err; - } - - dev->ext_priv = budget; budget->dvb_adapter.priv = budget; diff --git a/linux/drivers/media/dvb/ttpci/budget.h b/linux/drivers/media/dvb/ttpci/budget.h index 30f74b416..c5c226d4f 100644 --- a/linux/drivers/media/dvb/ttpci/budget.h +++ b/linux/drivers/media/dvb/ttpci/budget.h @@ -70,7 +70,13 @@ struct budget { int ci_present; int video_port; - u8 tsf; + u32 buffer_width; + u32 buffer_height; + u32 buffer_size; + u32 buffer_warning_threshold; + u32 buffer_warnings; + unsigned long buffer_warning_time; + u32 ttbp; int feeding; @@ -91,11 +97,6 @@ static struct saa7146_pci_extension_data x_var = { \ .ext_priv = &x_var ## _info, \ .ext = &budget_extension }; -#define TS_WIDTH (376) -#define TS_HEIGHT (512) -#define TS_BUFLEN (TS_WIDTH*TS_HEIGHT) -#define TS_MAX_PACKETS (TS_BUFLEN/TS_SIZE) - #define BUDGET_TT 0 #define BUDGET_TT_HW_DISEQC 1 #define BUDGET_PATCH 3 -- cgit v1.2.3 From 04b5c3627a782fb9773d5a538f2a4121ea546313 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 30 Mar 2006 03:46:12 +0200 Subject: fix typo in comment From: Adrian Bunk This patch fixes a typo in a comment. Signed-off-by: Adrian Bunk Signed-off-by: Oliver Endriss --- linux/drivers/media/dvb/ttpci/av7110.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/ttpci/av7110.c b/linux/drivers/media/dvb/ttpci/av7110.c index 87741cf17..cda21cab8 100644 --- a/linux/drivers/media/dvb/ttpci/av7110.c +++ b/linux/drivers/media/dvb/ttpci/av7110.c @@ -2123,7 +2123,7 @@ static int frontend_init(struct av7110 *av7110) read_pwm(av7110)); break; case 0x0003: - /* Haupauge DVB-C 2.1 VES1820/ALPS TDBE2 */ + /* Hauppauge DVB-C 2.1 VES1820/ALPS TDBE2 */ av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110)); break; -- cgit v1.2.3 From 3d2479ff04112f41bd9a231f1aed9e96fdd8d07d Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 30 Mar 2006 09:31:48 +0200 Subject: new module parameter 'tv_standard' (dvb-ttpci driver) From: C.Y.M This attached patch was originally proposed by Anssi Hannula to the dvb-kernel tree a while ago. I have recreated the patch for v4l-dvb. It will allow the user to choose the default broadcast mode when using the ttpci driver. NTSC users need to only add the following line to modprobe.d: options dvb-ttpci tv_standard=1 PAL users will not need to change anything, for this will be the default. Signed-off-by: C.Y.M Signed-off-by: Oliver Endriss --- linux/drivers/media/dvb/ttpci/av7110.c | 6 ++++++ linux/drivers/media/dvb/ttpci/av7110_av.c | 2 -- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/ttpci/av7110.c b/linux/drivers/media/dvb/ttpci/av7110.c index cda21cab8..940b05439 100644 --- a/linux/drivers/media/dvb/ttpci/av7110.c +++ b/linux/drivers/media/dvb/ttpci/av7110.c @@ -87,6 +87,7 @@ static int volume = 255; static int budgetpatch; static int wss_cfg_4_3 = 0x4008; static int wss_cfg_16_9 = 0x0007; +static int tv_standard; module_param_named(debug, av7110_debug, int, 0644); MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)"); @@ -109,6 +110,8 @@ module_param(wss_cfg_4_3, int, 0444); MODULE_PARM_DESC(wss_cfg_4_3, "WSS 4:3 - default 0x4008 - bit 15: disable, 14: burst mode, 13..0: wss data"); module_param(wss_cfg_16_9, int, 0444); MODULE_PARM_DESC(wss_cfg_16_9, "WSS 16:9 - default 0x0007 - bit 15: disable, 14: burst mode, 13..0: wss data"); +module_param(tv_standard, int, 0444); +MODULE_PARM_DESC(tv_standard, "TV standard: 0 PAL (default), 1 NTSC"); static void restart_feeds(struct av7110 *av7110); @@ -2543,6 +2546,9 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, av7110->osdwin = 1; mutex_init(&av7110->osd_mutex); + /* TV standard */ + av7110->vidmode = tv_standard == 1 ? VIDEO_MODE_NTSC : VIDEO_MODE_PAL; + /* ARM "watchdog" */ init_waitqueue_head(&av7110->arm_wait); av7110->arm_thread = NULL; diff --git a/linux/drivers/media/dvb/ttpci/av7110_av.c b/linux/drivers/media/dvb/ttpci/av7110_av.c index 400facec7..2eff09f63 100644 --- a/linux/drivers/media/dvb/ttpci/av7110_av.c +++ b/linux/drivers/media/dvb/ttpci/av7110_av.c @@ -1479,8 +1479,6 @@ int av7110_av_init(struct av7110 *av7110) void (*play[])(u8 *, int, void *) = { play_audio_cb, play_video_cb }; int i, ret; - av7110->vidmode = VIDEO_MODE_PAL; - for (i = 0; i < 2; i++) { struct ipack *ipack = av7110->ipack + i; -- cgit v1.2.3 From 5b513ea826a257bfa13e6083edd93815242f3730 Mon Sep 17 00:00:00 2001 From: "xyzzy@t2.domain.actdsltmp" Date: Thu, 30 Mar 2006 19:53:32 +0100 Subject: Fix memory leak in dvr open From: Trent Piepho The dvr device could be opened multiple times simultaneously in O_RDONLY mode. Each open after the first would allocate a new dvr buffer (1880 KB) and leak the old buffer. The first close would de-allocate the dvr buffer and cause all other open dvrs to stop working. This patch allows only a single O_RDONLY open of the drv device, as per the API specification. Multiple O_WRONLY opens are still allowed and don't appear to cause any problems. Signed-off-by: Trent Piepho Signed-off-by: Andrew de Quincey --- linux/drivers/media/dvb/dvb-core/dmxdev.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/dvb-core/dmxdev.c b/linux/drivers/media/dvb/dvb-core/dmxdev.c index 09e96e9dd..04578df3f 100644 --- a/linux/drivers/media/dvb/dvb-core/dmxdev.c +++ b/linux/drivers/media/dvb/dvb-core/dmxdev.c @@ -141,12 +141,18 @@ static int dvb_dvr_open(struct inode *inode, struct file *file) } if ((file->f_flags & O_ACCMODE) == O_RDONLY) { - void *mem = vmalloc(DVR_BUFFER_SIZE); + void *mem; + if (!dvbdev->readers) { + mutex_unlock(&dmxdev->mutex); + return -EBUSY; + } + mem = vmalloc(DVR_BUFFER_SIZE); if (!mem) { mutex_unlock(&dmxdev->mutex); return -ENOMEM; } dvb_ringbuffer_init(&dmxdev->dvr_buffer, mem, DVR_BUFFER_SIZE); + dvbdev->readers--; } if ((file->f_flags & O_ACCMODE) == O_WRONLY) { @@ -184,6 +190,7 @@ static int dvb_dvr_release(struct inode *inode, struct file *file) dmxdev->dvr_orig_fe); } if ((file->f_flags & O_ACCMODE) == O_RDONLY) { + dvbdev->readers++; if (dmxdev->dvr_buffer.data) { void *mem = dmxdev->dvr_buffer.data; mb(); @@ -1029,8 +1036,7 @@ static struct file_operations dvb_dvr_fops = { static struct dvb_device dvbdev_dvr = { .priv = NULL, - .users = 1, - .writers = 1, + .readers = 1, .fops = &dvb_dvr_fops }; -- cgit v1.2.3 From ec2c10b2d67b9015a2f4e174d482a4b076d38507 Mon Sep 17 00:00:00 2001 From: Andrew de Quincey Date: Thu, 30 Mar 2006 19:53:35 +0100 Subject: Fix budget-av CAM reset From: Andrew de Quincey Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. Note: other CA interface implementations (e.g. budget-ci) do not need this since they do not tie the CAM reset line to the frontend reset line. Signed-off-by: Andrew de Quincey --- linux/drivers/media/dvb/dvb-core/dvb_frontend.c | 18 +++++++++++++++++- linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 2 ++ linux/drivers/media/dvb/frontends/tda1004x.c | 12 ------------ linux/drivers/media/dvb/ttpci/budget-av.c | 13 ++++++++----- 4 files changed, 27 insertions(+), 18 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c index 55a91bb18..875033330 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -105,6 +105,7 @@ struct dvb_frontend_private { fe_status_t status; unsigned long tune_mode_flags; unsigned int delay; + unsigned int reinitialise; /* swzigzag values */ unsigned int state; @@ -121,6 +122,7 @@ struct dvb_frontend_private { unsigned int check_wrapped; }; +static void dvb_frontend_wakeup(struct dvb_frontend *fe); static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) { @@ -213,6 +215,15 @@ static void dvb_frontend_init(struct dvb_frontend *fe) fe->ops->init(fe); } +void dvb_frontend_reinitialise(struct dvb_frontend *fe) +{ + struct dvb_frontend_private *fepriv = fe->frontend_priv; + + fepriv->reinitialise = 1; + dvb_frontend_wakeup(fe); +} +EXPORT_SYMBOL(dvb_frontend_reinitialise); + static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked) { int q2; @@ -505,8 +516,8 @@ static int dvb_frontend_thread(void *data) fepriv->quality = 0; fepriv->delay = 3*HZ; fepriv->status = 0; - dvb_frontend_init(fe); fepriv->wakeup = 0; + fepriv->reinitialise = 1; while (1) { up(&fepriv->sem); /* is locked when we enter the thread... */ @@ -530,6 +541,11 @@ static int dvb_frontend_thread(void *data) if (down_interruptible(&fepriv->sem)) break; + if (fepriv->reinitialise) { + dvb_frontend_init(fe); + fepriv->reinitialise = 0; + } + /* do an iteration of the tuning loop */ if (fe->ops->tune) { /* have we been asked to retune? */ diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.h b/linux/drivers/media/dvb/dvb-core/dvb_frontend.h index d5aee5ad6..5926a3b74 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -112,6 +112,8 @@ extern int dvb_register_frontend(struct dvb_adapter* dvb, extern int dvb_unregister_frontend(struct dvb_frontend* fe); +extern void dvb_frontend_reinitialise(struct dvb_frontend *fe); + extern void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec); extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime); diff --git a/linux/drivers/media/dvb/frontends/tda1004x.c b/linux/drivers/media/dvb/frontends/tda1004x.c index 8e8df7b4c..b83dafa4e 100644 --- a/linux/drivers/media/dvb/frontends/tda1004x.c +++ b/linux/drivers/media/dvb/frontends/tda1004x.c @@ -52,7 +52,6 @@ struct tda1004x_state { struct dvb_frontend frontend; /* private demod data */ - u8 initialised; enum tda1004x_demod demod_type; }; @@ -594,9 +593,6 @@ static int tda10045_init(struct dvb_frontend* fe) dprintk("%s\n", __FUNCTION__); - if (state->initialised) - return 0; - if (tda10045_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); return -EIO; @@ -626,7 +622,6 @@ static int tda10045_init(struct dvb_frontend* fe) tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk); - state->initialised = 1; return 0; } @@ -635,9 +630,6 @@ static int tda10046_init(struct dvb_frontend* fe) struct tda1004x_state* state = fe->demodulator_priv; dprintk("%s\n", __FUNCTION__); - if (state->initialised) - return 0; - if (tda10046_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); return -EIO; @@ -697,7 +689,6 @@ static int tda10046_init(struct dvb_frontend* fe) // tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7); - state->initialised = 1; return 0; } @@ -1207,7 +1198,6 @@ static int tda1004x_sleep(struct dvb_frontend* fe) tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1); break; } - state->initialised = 0; return 0; } @@ -1271,7 +1261,6 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, state->config = config; state->i2c = i2c; memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops)); - state->initialised = 0; state->demod_type = TDA1004X_DEMOD_TDA10045; /* check if the demod is there */ @@ -1330,7 +1319,6 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, state->config = config; state->i2c = i2c; memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops)); - state->initialised = 0; state->demod_type = TDA1004X_DEMOD_TDA10046; /* check if the demod is there */ diff --git a/linux/drivers/media/dvb/ttpci/budget-av.c b/linux/drivers/media/dvb/ttpci/budget-av.c index 9dd4745f5..8efe3ce5f 100644 --- a/linux/drivers/media/dvb/ttpci/budget-av.c +++ b/linux/drivers/media/dvb/ttpci/budget-av.c @@ -60,11 +60,11 @@ struct budget_av { struct dvb_ca_en50221 ca; }; -/* GPIO CI Connections: - * 0 - Vcc/Reset (Reset is controlled by capacitor) - * 1 - Attribute Memory - * 2 - Card Enable (Active Low) - * 3 - Card Detect +/* GPIO Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! + * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory + * 2 - CI Card Enable (Active Low) + * 3 - CI Card Detect */ /**************************************************************************** @@ -214,6 +214,9 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d) msleep(100); + /* reinitialise the frontend */ + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); + if (timeout <= 0) { printk(KERN_ERR "budget-av: cam reset failed (timeout).\n"); -- cgit v1.2.3