From b10135b1a14de89a8c8babaa4b8963306822002c Mon Sep 17 00:00:00 2001 From: Ricardo Cerqueira Date: Thu, 17 Aug 2006 22:40:28 +0100 Subject: Enable audio DMA restart on channel change even when cx88-alsa is compiled From: Ricardo Cerqueira cx88-alsa can be compiled in (in distro built kernels, for example), but not used. In those cases, the audio DMA restart is needed for proper sound on NICAM channels. This patch enables the DMA restart even with ALSA, but the functions now check if cx88-alsa is really active. Signed-off-by: Ricardo Cerqueira --- linux/drivers/media/video/cx88/cx88-core.c | 10 ++++++++++ linux/drivers/media/video/cx88/cx88-tvaudio.c | 4 ---- 2 files changed, 10 insertions(+), 4 deletions(-) (limited to 'linux/drivers/media') diff --git a/linux/drivers/media/video/cx88/cx88-core.c b/linux/drivers/media/video/cx88/cx88-core.c index fbbb6ecf5..849e5bef1 100644 --- a/linux/drivers/media/video/cx88/cx88-core.c +++ b/linux/drivers/media/video/cx88/cx88-core.c @@ -832,6 +832,11 @@ int cx88_start_audio_dma(struct cx88_core *core) { /* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */ int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4; + + /* If downstream RISC is enabled, bail out; ALSA is managing DMA */ + if (cx_read(MO_AUD_DMACNTRL) & 0x10) + return 0; + /* setup fifo + format */ cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0); cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0); @@ -841,11 +846,16 @@ int cx88_start_audio_dma(struct cx88_core *core) /* start dma */ cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */ + return 0; } int cx88_stop_audio_dma(struct cx88_core *core) { + /* If downstream RISC is enabled, bail out; ALSA is managing DMA */ + if (cx_read(MO_AUD_DMACNTRL) & 0x10) + return 0; + /* stop dma */ cx_write(MO_AUD_DMACNTRL, 0x0000); diff --git a/linux/drivers/media/video/cx88/cx88-tvaudio.c b/linux/drivers/media/video/cx88/cx88-tvaudio.c index fccba4f6c..bb14a3598 100644 --- a/linux/drivers/media/video/cx88/cx88-tvaudio.c +++ b/linux/drivers/media/video/cx88/cx88-tvaudio.c @@ -140,14 +140,10 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl) { u32 volume; -#ifndef CONFIG_VIDEO_CX88_ALSA /* restart dma; This avoids buzz in NICAM and is good in others */ cx88_stop_audio_dma(core); -#endif cx_write(AUD_RATE_THRES_DMD, 0x000000C0); -#ifndef CONFIG_VIDEO_CX88_ALSA cx88_start_audio_dma(core); -#endif if (cx88_boards[core->board].blackbird) { /* sets sound input from external adc */ -- cgit v1.2.3