From 6bbc9163a42ac2c7a561b470cfffaec1a79e46b8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 9 Jun 2009 10:54:02 +0200 Subject: DaVinci: DM646x Video: VPIF driver From: Chaithrika U S Video Port Interface driver Add VPIF driver for DM646x. This code be used by the display and capture drivers. Priority: normal Signed-off-by: Manjunath Hadli Signed-off-by: Brijesh Jadav Signed-off-by: Chaithrika U S Reviewed-by: Hans Verkuil Signed-off-by: Hans Verkuil --- linux/drivers/media/video/davinci/vpif.c | 234 ++++++++++++ linux/drivers/media/video/davinci/vpif.h | 632 +++++++++++++++++++++++++++++++ 2 files changed, 866 insertions(+) create mode 100644 linux/drivers/media/video/davinci/vpif.c create mode 100644 linux/drivers/media/video/davinci/vpif.h (limited to 'linux') diff --git a/linux/drivers/media/video/davinci/vpif.c b/linux/drivers/media/video/davinci/vpif.c new file mode 100644 index 000000000..aa771268a --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif.c @@ -0,0 +1,234 @@ +/* + * vpif - DM646x Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiveing video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_CH0_MAX_MODES (22) +#define VPIF_CH1_MAX_MODES (02) +#define VPIF_CH2_MAX_MODES (15) +#define VPIF_CH3_MAX_MODES (02) + +static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->params.raw_params.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->params.raw_params.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->params.raw_params.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ((~(unsigned int)(0x3)) << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.raw_params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +void vpif_base_addr_init(void __iomem *base) +{ + vpif_base = base; +} +EXPORT_SYMBOL(vpif_base_addr_init); diff --git a/linux/drivers/media/video/davinci/vpif.h b/linux/drivers/media/video/davinci/vpif.h new file mode 100644 index 000000000..fca26dcb5 --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif.h @@ -0,0 +1,632 @@ +/* + * VPIF header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VPIF_H +#define VPIF_H + +#include +#include +#include + +/* Maximum channel allowed */ +#define VPIF_NUM_CHANNELS (4) +#define VPIF_CAPTURE_NUM_CHANNELS (2) +#define VPIF_DISPLAY_NUM_CHANNELS (2) + +/* Macros to read/write registers */ +static void __iomem *vpif_base; +#define regr(reg) readl((reg) + vpif_base) +#define regw(value, reg) writel(value, (reg + vpif_base)) + +/* Register Addresss Offsets */ +#define VPIF_PID (0x0000) +#define VPIF_CH0_CTRL (0x0004) +#define VPIF_CH1_CTRL (0x0008) +#define VPIF_CH2_CTRL (0x000C) +#define VPIF_CH3_CTRL (0x0010) + +#define VPIF_INTEN (0x0020) +#define VPIF_INTEN_SET (0x0024) +#define VPIF_INTEN_CLR (0x0028) +#define VPIF_STATUS (0x002C) +#define VPIF_STATUS_CLR (0x0030) +#define VPIF_EMULATION_CTRL (0x0034) +#define VPIF_REQ_SIZE (0x0038) + +#define VPIF_CH0_TOP_STRT_ADD_LUMA (0x0040) +#define VPIF_CH0_BTM_STRT_ADD_LUMA (0x0044) +#define VPIF_CH0_TOP_STRT_ADD_CHROMA (0x0048) +#define VPIF_CH0_BTM_STRT_ADD_CHROMA (0x004c) +#define VPIF_CH0_TOP_STRT_ADD_HANC (0x0050) +#define VPIF_CH0_BTM_STRT_ADD_HANC (0x0054) +#define VPIF_CH0_TOP_STRT_ADD_VANC (0x0058) +#define VPIF_CH0_BTM_STRT_ADD_VANC (0x005c) +#define VPIF_CH0_SP_CFG (0x0060) +#define VPIF_CH0_IMG_ADD_OFST (0x0064) +#define VPIF_CH0_HANC_ADD_OFST (0x0068) +#define VPIF_CH0_H_CFG (0x006c) +#define VPIF_CH0_V_CFG_00 (0x0070) +#define VPIF_CH0_V_CFG_01 (0x0074) +#define VPIF_CH0_V_CFG_02 (0x0078) +#define VPIF_CH0_V_CFG_03 (0x007c) + +#define VPIF_CH1_TOP_STRT_ADD_LUMA (0x0080) +#define VPIF_CH1_BTM_STRT_ADD_LUMA (0x0084) +#define VPIF_CH1_TOP_STRT_ADD_CHROMA (0x0088) +#define VPIF_CH1_BTM_STRT_ADD_CHROMA (0x008c) +#define VPIF_CH1_TOP_STRT_ADD_HANC (0x0090) +#define VPIF_CH1_BTM_STRT_ADD_HANC (0x0094) +#define VPIF_CH1_TOP_STRT_ADD_VANC (0x0098) +#define VPIF_CH1_BTM_STRT_ADD_VANC (0x009c) +#define VPIF_CH1_SP_CFG (0x00a0) +#define VPIF_CH1_IMG_ADD_OFST (0x00a4) +#define VPIF_CH1_HANC_ADD_OFST (0x00a8) +#define VPIF_CH1_H_CFG (0x00ac) +#define VPIF_CH1_V_CFG_00 (0x00b0) +#define VPIF_CH1_V_CFG_01 (0x00b4) +#define VPIF_CH1_V_CFG_02 (0x00b8) +#define VPIF_CH1_V_CFG_03 (0x00bc) + +#define VPIF_CH2_TOP_STRT_ADD_LUMA (0x00c0) +#define VPIF_CH2_BTM_STRT_ADD_LUMA (0x00c4) +#define VPIF_CH2_TOP_STRT_ADD_CHROMA (0x00c8) +#define VPIF_CH2_BTM_STRT_ADD_CHROMA (0x00cc) +#define VPIF_CH2_TOP_STRT_ADD_HANC (0x00d0) +#define VPIF_CH2_BTM_STRT_ADD_HANC (0x00d4) +#define VPIF_CH2_TOP_STRT_ADD_VANC (0x00d8) +#define VPIF_CH2_BTM_STRT_ADD_VANC (0x00dc) +#define VPIF_CH2_SP_CFG (0x00e0) +#define VPIF_CH2_IMG_ADD_OFST (0x00e4) +#define VPIF_CH2_HANC_ADD_OFST (0x00e8) +#define VPIF_CH2_H_CFG (0x00ec) +#define VPIF_CH2_V_CFG_00 (0x00f0) +#define VPIF_CH2_V_CFG_01 (0x00f4) +#define VPIF_CH2_V_CFG_02 (0x00f8) +#define VPIF_CH2_V_CFG_03 (0x00fc) +#define VPIF_CH2_HANC0_STRT (0x0100) +#define VPIF_CH2_HANC0_SIZE (0x0104) +#define VPIF_CH2_HANC1_STRT (0x0108) +#define VPIF_CH2_HANC1_SIZE (0x010c) +#define VPIF_CH2_VANC0_STRT (0x0110) +#define VPIF_CH2_VANC0_SIZE (0x0114) +#define VPIF_CH2_VANC1_STRT (0x0118) +#define VPIF_CH2_VANC1_SIZE (0x011c) + +#define VPIF_CH3_TOP_STRT_ADD_LUMA (0x0140) +#define VPIF_CH3_BTM_STRT_ADD_LUMA (0x0144) +#define VPIF_CH3_TOP_STRT_ADD_CHROMA (0x0148) +#define VPIF_CH3_BTM_STRT_ADD_CHROMA (0x014c) +#define VPIF_CH3_TOP_STRT_ADD_HANC (0x0150) +#define VPIF_CH3_BTM_STRT_ADD_HANC (0x0154) +#define VPIF_CH3_TOP_STRT_ADD_VANC (0x0158) +#define VPIF_CH3_BTM_STRT_ADD_VANC (0x015c) +#define VPIF_CH3_SP_CFG (0x0160) +#define VPIF_CH3_IMG_ADD_OFST (0x0164) +#define VPIF_CH3_HANC_ADD_OFST (0x0168) +#define VPIF_CH3_H_CFG (0x016c) +#define VPIF_CH3_V_CFG_00 (0x0170) +#define VPIF_CH3_V_CFG_01 (0x0174) +#define VPIF_CH3_V_CFG_02 (0x0178) +#define VPIF_CH3_V_CFG_03 (0x017c) +#define VPIF_CH3_HANC0_STRT (0x0180) +#define VPIF_CH3_HANC0_SIZE (0x0184) +#define VPIF_CH3_HANC1_STRT (0x0188) +#define VPIF_CH3_HANC1_SIZE (0x018c) +#define VPIF_CH3_VANC0_STRT (0x0190) +#define VPIF_CH3_VANC0_SIZE (0x0194) +#define VPIF_CH3_VANC1_STRT (0x0198) +#define VPIF_CH3_VANC1_SIZE (0x019c) + +#define VPIF_IODFT_CTRL (0x01c0) + +/* Functions for bit Manipulation */ +static inline void vpif_set_bit(u32 reg, u32 bit) +{ + regw((regr(reg)) | (0x01 << bit), reg); +} + +static inline void vpif_clr_bit(u32 reg, u32 bit) +{ + regw(((regr(reg)) & ~(0x01 << bit)), reg); +} + +/* Macro for Generating mask */ +#ifdef GENERATE_MASK +#undef GENERATE_MASK +#endif + +#define GENERATE_MASK(bits, pos) \ + ((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos) + +/* Bit positions in the channel control registers */ +#define VPIF_CH_DATA_MODE_BIT (2) +#define VPIF_CH_YC_MUX_BIT (3) +#define VPIF_CH_SDR_FMT_BIT (4) +#define VPIF_CH_HANC_EN_BIT (8) +#define VPIF_CH_VANC_EN_BIT (9) + +#define VPIF_CAPTURE_CH_NIP (10) +#define VPIF_DISPLAY_CH_NIP (11) + +#define VPIF_DISPLAY_PIX_EN_BIT (10) + +#define VPIF_CH_INPUT_FIELD_FRAME_BIT (12) + +#define VPIF_CH_FID_POLARITY_BIT (15) +#define VPIF_CH_V_VALID_POLARITY_BIT (14) +#define VPIF_CH_H_VALID_POLARITY_BIT (13) +#define VPIF_CH_DATA_WIDTH_BIT (28) + +#define VPIF_CH_CLK_EDGE_CTRL_BIT (31) + +/* Mask various length */ +#define VPIF_CH_EAVSAV_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_MASK GENERATE_MASK(12, 0) +#define VPIF_CH_WIDTH_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_SHIFT (16) + +/* VPIF masks for registers */ +#define VPIF_REQ_SIZE_MASK (0x1ff) + +/* bit posotion of interrupt vpif_ch_intr register */ +#define VPIF_INTEN_FRAME_CH0 (0x00000001) +#define VPIF_INTEN_FRAME_CH1 (0x00000002) +#define VPIF_INTEN_FRAME_CH2 (0x00000004) +#define VPIF_INTEN_FRAME_CH3 (0x00000008) + +/* bit position of clock and channel enable in vpif_chn_ctrl register */ + +#define VPIF_CH0_CLK_EN (0x00000002) +#define VPIF_CH0_EN (0x00000001) +#define VPIF_CH1_CLK_EN (0x00000002) +#define VPIF_CH1_EN (0x00000001) +#define VPIF_CH2_CLK_EN (0x00000002) +#define VPIF_CH2_EN (0x00000001) +#define VPIF_CH3_CLK_EN (0x00000002) +#define VPIF_CH3_EN (0x00000001) +#define VPIF_CH_CLK_EN (0x00000002) +#define VPIF_CH_EN (0x00000001) + +#define VPIF_INT_TOP (0x00) +#define VPIF_INT_BOTTOM (0x01) +#define VPIF_INT_BOTH (0x02) + +#define VPIF_CH0_INT_CTRL_SHIFT (6) +#define VPIF_CH1_INT_CTRL_SHIFT (6) +#define VPIF_CH2_INT_CTRL_SHIFT (6) +#define VPIF_CH3_INT_CTRL_SHIFT (6) +#define VPIF_CH_INT_CTRL_SHIFT (6) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel1_intr_assert() (regw((regr(VPIF_CH1_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel2_intr_assert() (regw((regr(VPIF_CH2_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel3_intr_assert() (regw((regr(VPIF_CH3_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL)) + +#define VPIF_CH_FID_MASK (0x20) +#define VPIF_CH_FID_SHIFT (5) + +#define VPIF_NTSC_VBI_START_FIELD0 (1) +#define VPIF_NTSC_VBI_START_FIELD1 (263) +#define VPIF_PAL_VBI_START_FIELD0 (624) +#define VPIF_PAL_VBI_START_FIELD1 (311) + +#define VPIF_NTSC_HBI_START_FIELD0 (1) +#define VPIF_NTSC_HBI_START_FIELD1 (263) +#define VPIF_PAL_HBI_START_FIELD0 (624) +#define VPIF_PAL_HBI_START_FIELD1 (311) + +#define VPIF_NTSC_VBI_COUNT_FIELD0 (20) +#define VPIF_NTSC_VBI_COUNT_FIELD1 (19) +#define VPIF_PAL_VBI_COUNT_FIELD0 (24) +#define VPIF_PAL_VBI_COUNT_FIELD1 (25) + +#define VPIF_NTSC_HBI_COUNT_FIELD0 (263) +#define VPIF_NTSC_HBI_COUNT_FIELD1 (262) +#define VPIF_PAL_HBI_COUNT_FIELD0 (312) +#define VPIF_PAL_HBI_COUNT_FIELD1 (313) + +#define VPIF_NTSC_VBI_SAMPLES_PER_LINE (720) +#define VPIF_PAL_VBI_SAMPLES_PER_LINE (720) +#define VPIF_NTSC_HBI_SAMPLES_PER_LINE (268) +#define VPIF_PAL_HBI_SAMPLES_PER_LINE (280) + +#define VPIF_CH_VANC_EN (0x20) +#define VPIF_DMA_REQ_SIZE (0x080) +#define VPIF_EMULATION_DISABLE (0x01) + +extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS]; + +/* inline function to enable/disable channel0 */ +static inline void enable_channel0(int enable) +{ + if (enable) + regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL); + else + regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL); +} + +/* inline function to enable/disable channel1 */ +static inline void enable_channel1(int enable) +{ + if (enable) + regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL); + else + regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL); +} + +/* inline function to enable interrupt for channel0 */ +static inline void channel0_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } +} + +/* inline function to enable interrupt for channel1 */ +static inline void channel1_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA); +} + +static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + + regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +static inline void ch0_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC); +} + +static inline void ch0_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC); +} + +static inline void ch1_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC); +} + +static inline void ch1_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC); +} + +/* Inline function to enable raw vbi in the given channel */ +static inline void disable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +static inline void enable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +/* inline function to enable/disable channel2 */ +static inline void enable_channel2(int enable) +{ + if (enable) { + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL); + } else { + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL); + } +} + +/* inline function to enable/disable channel3 */ +static inline void enable_channel3(int enable) +{ + if (enable) { + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL); + } else { + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL); + } +} + +/* inline function to enable interrupt for channel2 */ +static inline void channel2_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } +} + +/* inline function to enable interrupt for channel3 */ +static inline void channel3_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } +} + +/* inline function to enable raw vbi data for channel2 */ +static inline void channel2_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH2_CTRL, mask); + else + vpif_clr_bit(VPIF_CH2_CTRL, mask); +} + +/* inline function to enable raw vbi data for channel3*/ +static inline void channel3_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH3_CTRL, mask); + else + vpif_clr_bit(VPIF_CH3_CTRL, mask); +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA); +} + +static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for vbi data */ +static inline void ch2_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC); +} + +static inline void ch3_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC); +} + +#define VPIF_MAX_NAME (30) + +/* This structure will store size parameters as per the mode selected by user */ +struct vpif_channel_config_params { + char name[VPIF_MAX_NAME]; /* Name of the mode */ + u16 width; /* Indicates width of the image */ + u16 height; /* Indicates height of the image */ + u8 fps; + u8 frm_fmt; /* Indicates whether this is interlaced + * or progressive format */ + u8 ycmux_mode; /* Indicates whether this mode requires + * single or two channels */ + u16 eav2sav; /* length of sav 2 eav */ + u16 sav2eav; /* length of sav 2 eav */ + u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ + u16 vsize; /* Vertical size of the image */ + u8 capture_format; /* Indicates whether capture format + * is in BT or in CCD/CMOS */ + u8 vbi_supported; /* Indicates whether this mode + * supports capturing vbi or not */ + u8 hd_sd; + v4l2_std_id stdid; +}; + +struct vpif_interface; +struct vpif_params; +struct vpif_vbi_params; + +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id); +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id); +int vpif_channel_getfid(u8 channel_id); +void vpif_base_addr_init(void __iomem *base); + +/* Enumerated data types */ +enum vpif_capture_pinpol { + VPIF_CAPTURE_PINPOL_SAME = 0, + VPIF_CAPTURE_PINPOL_INVERT = 1 +}; + +enum data_size { + _8BITS = 0, + _10BITS, + _12BITS, +}; + +struct vpif_capture_params_raw { + enum data_size data_sz; + enum vpif_capture_pinpol fid_pol; + enum vpif_capture_pinpol vd_pol; + enum vpif_capture_pinpol hd_pol; +}; + +/* Structure for vpif parameters for raw vbi data */ +struct vpif_vbi_params { + __u32 hstart0; /* Horizontal start of raw vbi data for first field */ + __u32 vstart0; /* Vertical start of raw vbi data for first field */ + __u32 hsize0; /* Horizontal size of raw vbi data for first field */ + __u32 vsize0; /* Vertical size of raw vbi data for first field */ + __u32 hstart1; /* Horizontal start of raw vbi data for second field */ + __u32 vstart1; /* Vertical start of raw vbi data for second field */ + __u32 hsize1; /* Horizontal size of raw vbi data for second field */ + __u32 vsize1; /* Vertical size of raw vbi data for second field */ +}; + +/* structure for vpif parameters */ +struct vpif_interface { + __u8 storage_mode; /* Indicates field or frame mode */ + unsigned long hpitch; + v4l2_std_id stdid; +}; + +struct vpif_params { + struct vpif_interface video_params; + struct vpif_channel_config_params std_info; + union param { + struct vpif_vbi_params vbi_params; + struct vpif_capture_params_raw raw_params; + } params; +}; + +#endif /* End of #ifndef VPIF_H */ + -- cgit v1.2.3 From a97d14d9276802762e30cd33312dca3cee970e68 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 9 Jun 2009 10:55:37 +0200 Subject: DaVinci: DM646x Video: Add VPIF display driver From: Chaithrika U S Display driver for VPIF Adds the VPIF display driver and the associated header file. Priority: normal Signed-off-by: Manjunath Hadli Signed-off-by: Brijesh Jadav Signed-off-by: Chaithrika U S Reviewed-by: Hans Verkuil Signed-off-by: Hans Verkuil --- linux/drivers/media/video/davinci/vpif_display.c | 1664 ++++++++++++++++++++++ linux/drivers/media/video/davinci/vpif_display.h | 175 +++ 2 files changed, 1839 insertions(+) create mode 100644 linux/drivers/media/video/davinci/vpif_display.c create mode 100644 linux/drivers/media/video/davinci/vpif_display.h (limited to 'linux') diff --git a/linux/drivers/media/video/davinci/vpif_display.c b/linux/drivers/media/video/davinci/vpif_display.c new file mode 100644 index 000000000..5e2b86b3f --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif_display.c @@ -0,0 +1,1664 @@ +/* + * vpif-display - VPIF display driver + * Display driver for TI DaVinci VPIF + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include + +#include "vpif_display.h" +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci VPIF Display driver"); +MODULE_LICENSE("GPL"); + +#define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50) + +#define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) +#define vpif_dbg(level, debug, fmt, arg...) \ + v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg) + +static int debug = 1; +static u32 ch2_numbuffers = 3; +static u32 ch3_numbuffers = 3; +static u32 ch2_bufsize = 1920 * 1080 * 2; +static u32 ch3_bufsize = 720 * 576 * 2; + +module_param(debug, int, 0644); +module_param(ch2_numbuffers, uint, S_IRUGO); +module_param(ch3_numbuffers, uint, S_IRUGO); +module_param(ch2_bufsize, uint, S_IRUGO); +module_param(ch3_bufsize, uint, S_IRUGO); + +MODULE_PARM_DESC(debug, "Debug level 0-1"); +MODULE_PARM_DESC(ch2_numbuffers, "Channel2 buffer count (default:3)"); +MODULE_PARM_DESC(ch3_numbuffers, "Channel3 buffer count (default:3)"); +MODULE_PARM_DESC(ch2_bufsize, "Channel2 buffer size (default:1920 x 1080 x 2)"); +MODULE_PARM_DESC(ch3_bufsize, "Channel3 buffer size (default:720 x 576 x 2)"); + +static struct vpif_config_params config_params = { + .min_numbuffers = 3, + .numbuffers[0] = 3, + .numbuffers[1] = 3, + .min_bufsize[0] = 720 * 480 * 2, + .min_bufsize[1] = 720 * 480 * 2, + .channel_bufsize[0] = 1920 * 1080 * 2, + .channel_bufsize[1] = 720 * 576 * 2, +}; + +static struct vpif_device vpif_obj = { {NULL} }; +static struct device *vpif_dev; + +static const struct vpif_channel_config_params ch_params[] = { + { + "NTSC", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266, + 286, 525, 525, 0, 1, 0, V4L2_STD_525_60, + }, + { + "PAL", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313, + 336, 624, 625, 0, 1, 0, V4L2_STD_625_50, + }, +}; + +/* + * vpif_uservirt_to_phys: This function is used to convert user + * space virtual address to physical address. + */ +static u32 vpif_uservirt_to_phys(u32 virtp) +{ + struct mm_struct *mm = current->mm; + unsigned long physp = 0; + struct vm_area_struct *vma; + + vma = find_vma(mm, virtp); + + /* For kernel direct-mapped memory, take the easy way */ + if (virtp >= PAGE_OFFSET) { + physp = virt_to_phys((void *)virtp); + } else if (vma && (vma->vm_flags & VM_IO) && (vma->vm_pgoff)) { + /* this will catch, kernel-allocated, mmaped-to-usermode addr */ + physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start); + } else { + /* otherwise, use get_user_pages() for general userland pages */ + int res, nr_pages = 1; + struct page *pages; + down_read(¤t->mm->mmap_sem); + + res = get_user_pages(current, current->mm, + virtp, nr_pages, 1, 0, &pages, NULL); + up_read(¤t->mm->mmap_sem); + + if (res == nr_pages) { + physp = __pa(page_address(&pages[0]) + + (virtp & ~PAGE_MASK)); + } else { + vpif_err("get_user_pages failed\n"); + return 0; + } + } + + return physp; +} + +/* + * buffer_prepare: This is the callback function called from videobuf_qbuf() + * function the buffer is prepared and user space virtual address is converted + * into physical address + */ +static int vpif_buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpif_fh *fh = q->priv_data; + struct common_obj *common; + unsigned long addr; + + common = &fh->channel->common[VPIF_VIDEO_INDEX]; + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = common->width; + vb->height = common->height; + vb->size = vb->width * vb->height; + vb->field = field; + } + vb->state = VIDEOBUF_PREPARED; + + /* if user pointer memory mechanism is used, get the physical + * address of the buffer */ + if (V4L2_MEMORY_USERPTR == common->memory) { + if (!vb->baddr) { + vpif_err("buffer_address is 0\n"); + return -EINVAL; + } + + vb->boff = vpif_uservirt_to_phys(vb->baddr); + if (!ISALIGNED(vb->boff)) + goto buf_align_exit; + } + + addr = vb->boff; + if (q->streaming && (V4L2_BUF_TYPE_SLICED_VBI_OUTPUT != q->type)) { + if (!ISALIGNED(addr + common->ytop_off) || + !ISALIGNED(addr + common->ybtm_off) || + !ISALIGNED(addr + common->ctop_off) || + !ISALIGNED(addr + common->cbtm_off)) + goto buf_align_exit; + } + return 0; + +buf_align_exit: + vpif_err("buffer offset not aligned to 8 bytes\n"); + return -EINVAL; +} + +/* + * vpif_buffer_setup: This function allocates memory for the buffers + */ +static int vpif_buffer_setup(struct videobuf_queue *q, unsigned int *count, + unsigned int *size) +{ + struct vpif_fh *fh = q->priv_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (V4L2_MEMORY_MMAP != common->memory) + return 0; + + *size = config_params.channel_bufsize[ch->channel_id]; + if (*count < config_params.min_numbuffers) + *count = config_params.min_numbuffers; + + return 0; +} + +/* + * vpif_buffer_queue: This function adds the buffer to DMA queue + */ +static void vpif_buffer_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct vpif_fh *fh = q->priv_data; + struct common_obj *common; + + common = &fh->channel->common[VPIF_VIDEO_INDEX]; + + /* add the buffer to the DMA queue */ + list_add_tail(&vb->queue, &common->dma_queue); + vb->state = VIDEOBUF_QUEUED; +} + +/* + * vpif_buffer_release: This function is called from the videobuf layer to + * free memory allocated to the buffers + */ +static void vpif_buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct vpif_fh *fh = q->priv_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned int buf_size = 0; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + videobuf_dma_contig_free(q, vb); + vb->state = VIDEOBUF_NEEDS_INIT; + + if (V4L2_MEMORY_MMAP != common->memory) + return; + + buf_size = config_params.channel_bufsize[ch->channel_id]; +} + +static struct videobuf_queue_ops video_qops = { + .buf_setup = vpif_buffer_setup, + .buf_prepare = vpif_buffer_prepare, + .buf_queue = vpif_buffer_queue, + .buf_release = vpif_buffer_release, +}; +static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} }; + +static void process_progressive_mode(struct common_obj *common) +{ + unsigned long addr = 0; + + /* Get the next buffer from buffer queue */ + common->next_frm = list_entry(common->dma_queue.next, + struct videobuf_buffer, queue); + /* Remove that buffer from the buffer queue */ + list_del(&common->next_frm->queue); + /* Mark status of the buffer as active */ + common->next_frm->state = VIDEOBUF_ACTIVE; + + /* Set top and bottom field addrs in VPIF registers */ + addr = videobuf_to_dma_contig(common->next_frm); + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); +} + +static void process_interlaced_mode(int fid, struct common_obj *common) +{ + /* device field id and local field id are in sync */ + /* If this is even field */ + if (0 == fid) { + if (common->cur_frm == common->next_frm) + return; + + /* one frame is displayed If next frame is + * available, release cur_frm and move on */ + /* Copy frame display time */ + do_gettimeofday(&common->cur_frm->ts); + /* Change status of the cur_frm */ + common->cur_frm->state = VIDEOBUF_DONE; + /* unlock semaphore on cur_frm */ + wake_up_interruptible(&common->cur_frm->done); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + + } else if (1 == fid) { /* odd field */ + if (list_empty(&common->dma_queue) + || (common->cur_frm != common->next_frm)) { + return; + } + /* one field is displayed configure the next + * frame if it is available else hold on current + * frame */ + /* Get next from the buffer queue */ + process_progressive_mode(common); + + } +} + +/* + * vpif_channel_isr: It changes status of the displayed buffer, takes next + * buffer from the queue and sets its address in VPIF registers + */ +static irqreturn_t vpif_channel_isr(int irq, void *dev_id) +{ + struct vpif_device *dev = &vpif_obj; + struct channel_obj *ch; + struct common_obj *common; + enum v4l2_field field; + int fid = -1, i; + int channel_id = 0; + + channel_id = *(int *)(dev_id); + ch = dev->dev[channel_id]; + field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field; + for (i = 0; i < VPIF_NUMOBJECTS; i++) { + common = &ch->common[i]; + /* If streaming is started in this channel */ + if (0 == common->started) + continue; + + if (1 == ch->vpifparams.std_info.frm_fmt) { + if (list_empty(&common->dma_queue)) + continue; + + /* Progressive mode */ + if (!channel_first_int[i][channel_id]) { + /* Mark status of the cur_frm to + * done and unlock semaphore on it */ + do_gettimeofday(&common->cur_frm->ts); + common->cur_frm->state = VIDEOBUF_DONE; + wake_up_interruptible(&common->cur_frm->done); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + } + + channel_first_int[i][channel_id] = 0; + process_progressive_mode(common); + } else { + /* Interlaced mode */ + /* If it is first interrupt, ignore it */ + + if (channel_first_int[i][channel_id]) { + channel_first_int[i][channel_id] = 0; + continue; + } + + if (0 == i) { + ch->field_id ^= 1; + /* Get field id from VPIF registers */ + fid = vpif_channel_getfid(ch->channel_id + 2); + /* If fid does not match with stored field id */ + if (fid != ch->field_id) { + /* Make them in sync */ + if (0 == fid) + ch->field_id = fid; + + return IRQ_HANDLED; + } + } + process_interlaced_mode(fid, common); + } + } + + return IRQ_HANDLED; +} + +static int vpif_get_std_info(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + const struct vpif_channel_config_params *config; + + int index; + + std_info->stdid = vid_ch->stdid; + if (!std_info) + return -1; + + for (index = 0; index < ARRAY_SIZE(ch_params); index++) { + config = &ch_params[index]; + if (config->stdid & std_info->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } + + if (index == ARRAY_SIZE(ch_params)) + return -1; + + common->fmt.fmt.pix.width = std_info->width; + common->fmt.fmt.pix.height = std_info->height; + vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n", + common->fmt.fmt.pix.width, common->fmt.fmt.pix.height); + + /* Set height and width paramateres */ + ch->common[VPIF_VIDEO_INDEX].height = std_info->height; + ch->common[VPIF_VIDEO_INDEX].width = std_info->width; + + return 0; +} + +/* + * vpif_calculate_offsets: This function calculates buffers offset for Y and C + * in the top and bottom field + */ +static void vpif_calculate_offsets(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpifparams = &ch->vpifparams; + enum v4l2_field field = common->fmt.fmt.pix.field; + struct video_obj *vid_ch = &ch->video; + unsigned int hpitch, vpitch, sizeimage; + + if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) { + if (ch->vpifparams.std_info.frm_fmt) + vid_ch->buf_field = V4L2_FIELD_NONE; + else + vid_ch->buf_field = V4L2_FIELD_INTERLACED; + } else { + vid_ch->buf_field = common->fmt.fmt.pix.field; + } + + if (V4L2_MEMORY_USERPTR == common->memory) + sizeimage = common->fmt.fmt.pix.sizeimage; + else + sizeimage = config_params.channel_bufsize[ch->channel_id]; + + hpitch = common->fmt.fmt.pix.bytesperline; + vpitch = sizeimage / (hpitch * 2); + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + common->ytop_off = 0; + common->ybtm_off = hpitch; + common->ctop_off = sizeimage / 2; + common->cbtm_off = sizeimage / 2 + hpitch; + } else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) { + common->ytop_off = 0; + common->ybtm_off = sizeimage / 4; + common->ctop_off = sizeimage / 2; + common->cbtm_off = common->ctop_off + sizeimage / 4; + } else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) { + common->ybtm_off = 0; + common->ytop_off = sizeimage / 4; + common->cbtm_off = sizeimage / 2; + common->ctop_off = common->cbtm_off + sizeimage / 4; + } + + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + vpifparams->video_params.storage_mode = 1; + } else { + vpifparams->video_params.storage_mode = 0; + } + + if (ch->vpifparams.std_info.frm_fmt == 1) { + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } else { + if ((field == V4L2_FIELD_ANY) || + (field == V4L2_FIELD_INTERLACED)) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline * 2; + else + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } + + ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid; +} + +static void vpif_config_format(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + common->fmt.fmt.pix.field = V4L2_FIELD_ANY; + if (config_params.numbuffers[ch->channel_id] == 0) + common->memory = V4L2_MEMORY_USERPTR; + else + common->memory = V4L2_MEMORY_MMAP; + + common->fmt.fmt.pix.sizeimage = + config_params.channel_bufsize[ch->channel_id]; + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P; + common->fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; +} + +static int vpif_check_format(struct channel_obj *ch, + struct v4l2_pix_format *pixfmt) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + enum v4l2_field field = pixfmt->field; + u32 sizeimage, hpitch, vpitch; + + if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) + goto invalid_fmt_exit; + + if (!(VPIF_VALID_FIELD(field))) + goto invalid_fmt_exit; + + if (pixfmt->bytesperline <= 0) + goto invalid_pitch_exit; + + if (V4L2_MEMORY_USERPTR == common->memory) + sizeimage = pixfmt->sizeimage; + else + sizeimage = config_params.channel_bufsize[ch->channel_id]; + + if (vpif_get_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + hpitch = pixfmt->bytesperline; + vpitch = sizeimage / (hpitch * 2); + + /* Check for valid value of pitch */ + if ((hpitch < ch->vpifparams.std_info.width) || + (vpitch < ch->vpifparams.std_info.height)) + goto invalid_pitch_exit; + + /* Check for 8 byte alignment */ + if (!ISALIGNED(hpitch)) { + vpif_err("invalid pitch alignment\n"); + return -EINVAL; + } + pixfmt->width = common->fmt.fmt.pix.width; + pixfmt->height = common->fmt.fmt.pix.height; + + return 0; + +invalid_fmt_exit: + vpif_err("invalid field format\n"); + return -EINVAL; + +invalid_pitch_exit: + vpif_err("invalid pitch\n"); + return -EINVAL; +} + +static void vpif_config_addr(struct channel_obj *ch, int muxmode) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (VPIF_CHANNEL3_VIDEO == ch->channel_id) { + common->set_addr = ch3_set_videobuf_addr; + } else { + if (2 == muxmode) + common->set_addr = ch2_set_videobuf_addr_yc_nmux; + else + common->set_addr = ch2_set_videobuf_addr; + } +} + +/* + * vpif_mmap: It is used to map kernel space buffers into user spaces + */ +static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct vpif_fh *fh = filep->private_data; + struct common_obj *common = &fh->channel->common[VPIF_VIDEO_INDEX]; + + return videobuf_mmap_mapper(&common->buffer_queue, vma); +} + +/* + * vpif_poll: It is used for select/poll system call + */ +static unsigned int vpif_poll(struct file *filep, poll_table *wait) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (common->started) + return videobuf_poll_stream(filep, &common->buffer_queue, wait); + + return 0; +} + +/* + * vpif_open: It creates object of file handle structure and stores it in + * private_data member of filepointer + */ +static int vpif_open(struct file *filep) +{ + struct video_device *vdev = video_devdata(filep); + struct channel_obj *ch = NULL; + struct vpif_fh *fh = NULL; + + ch = video_get_drvdata(vdev); + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpif_fh), GFP_KERNEL); + if (fh == NULL) { + vpif_err("unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + /* store pointer to fh in private_data member of filep */ + filep->private_data = fh; + fh->channel = ch; + fh->initialized = 0; + if (!ch->initialized) { + fh->initialized = 1; + ch->initialized = 1; + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + } + + /* Increment channel usrs counter */ + atomic_inc(&ch->usrs); + /* Set io_allowed[VPIF_VIDEO_INDEX] member to false */ + fh->io_allowed[VPIF_VIDEO_INDEX] = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&ch->prio, &fh->prio); + + return 0; +} + +/* + * vpif_release: This function deletes buffer queue, frees the buffers and + * the vpif file handle + */ +static int vpif_release(struct file *filep) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + mutex_lock_interruptible(&common->lock); + /* if this instance is doing IO */ + if (fh->io_allowed[VPIF_VIDEO_INDEX]) { + /* Reset io_usrs member of channel object */ + common->io_usrs = 0; + /* Disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + common->started = 0; + /* Free buffers allocated */ + videobuf_queue_cancel(&common->buffer_queue); + videobuf_mmap_free(&common->buffer_queue); + common->numbuffers = + config_params.numbuffers[ch->channel_id]; + } + + mutex_unlock(&common->lock); + + /* Decrement channel usrs counter */ + atomic_dec(&ch->usrs); + /* If this file handle has initialize encoder device, reset it */ + if (fh->initialized) + ch->initialized = 0; + + /* Close the priority */ + v4l2_prio_close(&ch->prio, &fh->prio); + filep->private_data = NULL; + fh->initialized = 0; + kfree(fh); + + return 0; +} + +/* functions implementing ioctls */ + +static int vpif_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpif_config *config = vpif_dev->platform_data; + + cap->version = VPIF_DISPLAY_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + strlcpy(cap->driver, "vpif display", sizeof(cap->driver)); + strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, config->card_name, sizeof(cap->card)); + + return 0; +} + +static int vpif_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + if (fmt->index != 0) { + vpif_err("Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + strcpy(fmt->description, "YCbCr4:2:2 YC Planar"); + fmt->pixelformat = V4L2_PIX_FMT_YUV422P; + + return 0; +} + +static int vpif_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Check the validity of the buffer type */ + if (common->fmt.type != fmt->type) + return -EINVAL; + + /* Fill in the information about format */ + mutex_lock_interruptible(&common->lock); + if (vpif_get_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + *fmt = common->fmt; + mutex_unlock(&common->lock); + return 0; +} + +static int vpif_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct v4l2_pix_format *pixfmt; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + + /* Check for the priority */ + ret = v4l2_prio_check(&ch->prio, &fh->prio); + if (0 != ret) + return ret; + fh->initialized = 1; + } + + if (common->started) { + vpif_dbg(1, debug, "Streaming in progress\n"); + return -EBUSY; + } + + pixfmt = &fmt->fmt.pix; + /* Check for valid field format */ + ret = vpif_check_format(ch, pixfmt); + if (ret) + return ret; + + /* store the pix format in the channel object */ + common->fmt.fmt.pix = *pixfmt; + /* store the format in the channel object */ + mutex_lock_interruptible(&common->lock); + common->fmt = *fmt; + mutex_unlock(&common->lock); + + return 0; +} + +static int vpif_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret = 0; + + ret = vpif_check_format(ch, pixfmt); + if (ret) { + *pixfmt = common->fmt.fmt.pix; + pixfmt->sizeimage = pixfmt->width * pixfmt->height * 2; + } + + return ret; +} + +static int vpif_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + enum v4l2_field field; + u8 index = 0; + int ret = 0; + + /* This file handle has not initialized the channel, + It is not allowed to do settings */ + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_err("Channel Busy\n"); + return -EBUSY; + } + } + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != reqbuf->type) + return -EINVAL; + + index = VPIF_VIDEO_INDEX; + + common = &ch->common[index]; + mutex_lock_interruptible(&common->lock); + if (common->fmt.type != reqbuf->type) { + ret = -EINVAL; + goto reqbuf_exit; + } + + if (0 != common->io_usrs) { + ret = -EBUSY; + goto reqbuf_exit; + } + + if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY) + field = V4L2_FIELD_INTERLACED; + else + field = common->fmt.fmt.pix.field; + } else { + field = V4L2_VBI_INTERLACED; + } + + /* Initialize videobuf queue as per the buffer type */ + videobuf_queue_dma_contig_init(&common->buffer_queue, + &video_qops, NULL, + &common->irqlock, + reqbuf->type, field, + sizeof(struct videobuf_buffer), fh); + + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed[index] = 1; + /* Increment io usrs member of channel object to 1 */ + common->io_usrs = 1; + /* Store type of memory requested in channel object */ + common->memory = reqbuf->memory; + INIT_LIST_HEAD(&common->dma_queue); + + /* Allocate buffers */ + ret = videobuf_reqbufs(&common->buffer_queue, reqbuf); + +reqbuf_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_querybuf(struct file *file, void *priv, + struct v4l2_buffer *tbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (common->fmt.type != tbuf->type) + return -EINVAL; + + return videobuf_querybuf(&common->buffer_queue, tbuf); +} + +static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_buffer tbuf = *buf; + struct videobuf_buffer *buf1; + unsigned long addr = 0; + unsigned long flags; + int ret = 0; + + if (common->fmt.type != tbuf.type) + return -EINVAL; + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + if (!(list_empty(&common->dma_queue)) || + (common->cur_frm != common->next_frm) || + !(common->started) || + (common->started && (0 == ch->field_id))) + return videobuf_qbuf(&common->buffer_queue, buf); + + /* bufferqueue is empty store buffer address in VPIF registers */ + mutex_lock(&common->buffer_queue.vb_lock); + buf1 = common->buffer_queue.bufs[tbuf.index]; + if (buf1->memory != tbuf.memory) { + vpif_err("invalid buffer type\n"); + goto qbuf_exit; + } + + if ((buf1->state == VIDEOBUF_QUEUED) || + (buf1->state == VIDEOBUF_ACTIVE)) { + vpif_err("invalid state\n"); + goto qbuf_exit; + } + + switch (buf1->memory) { + case V4L2_MEMORY_MMAP: + if (buf1->baddr == 0) + goto qbuf_exit; + break; + + case V4L2_MEMORY_USERPTR: + if (tbuf.length < buf1->bsize) + goto qbuf_exit; + + if ((VIDEOBUF_NEEDS_INIT != buf1->state) + && (buf1->baddr != tbuf.m.userptr)) + vpif_buffer_release(&common->buffer_queue, buf1); + buf1->baddr = tbuf.m.userptr; + break; + + default: + goto qbuf_exit; + } + + local_irq_save(flags); + ret = vpif_buffer_prepare(&common->buffer_queue, buf1, + common->buffer_queue.field); + if (ret < 0) { + local_irq_restore(flags); + goto qbuf_exit; + } + + buf1->state = VIDEOBUF_ACTIVE; + addr = buf1->boff; + common->next_frm = buf1; + if (tbuf.type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) { + common->set_addr((addr + common->ytop_off), + (addr + common->ybtm_off), + (addr + common->ctop_off), + (addr + common->cbtm_off)); + } + + local_irq_restore(flags); + list_add_tail(&buf1->stream, &common->buffer_queue.stream); + mutex_unlock(&common->buffer_queue.vb_lock); + return 0; + +qbuf_exit: + mutex_unlock(&common->buffer_queue.vb_lock); + return -EINVAL; +} + +static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (!(*std_id & DM646X_V4L2_STD)) + return -EINVAL; + + if (common->started) { + vpif_err("streaming in progress\n"); + return -EBUSY; + } + + /* Call encoder subdevice function to set the standard */ + mutex_lock_interruptible(&common->lock); + + ch->video.stdid = *std_id; + /* Get the information about the standard */ + if (vpif_get_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + if ((ch->vpifparams.std_info.width * + ch->vpifparams.std_info.height * 2) > + config_params.channel_bufsize[ch->channel_id]) { + vpif_err("invalid std for this size\n"); + ret = -EINVAL; + goto s_std_exit; + } + + common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width; + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_std_output, *std_id); + if (ret < 0) { + vpif_err("Failed to set output standard\n"); + goto s_std_exit; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core, + s_std, *std_id); + if (ret < 0) + vpif_err("Failed to set standard for sub devices\n"); + +s_std_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *std = ch->video.stdid; + return 0; +} + +static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + return videobuf_dqbuf(&common->buffer_queue, p, + (file->f_flags & O_NONBLOCK)); +} + +static int vpif_streamon(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id]; + struct vpif_params *vpif = &ch->vpifparams; + struct vpif_config *vpif_config_data = + vpif_dev->platform_data; + unsigned long addr = 0; + int ret = 0; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + /* If Streaming is already started, return error */ + if (common->started) { + vpif_err("channel->started\n"); + return -EBUSY; + } + + if ((ch->channel_id == VPIF_CHANNEL2_VIDEO + && oth_ch->common[VPIF_VIDEO_INDEX].started && + ch->vpifparams.std_info.ycmux_mode == 0) + || ((ch->channel_id == VPIF_CHANNEL3_VIDEO) + && (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) { + vpif_err("other channel is using\n"); + return -EBUSY; + } + + ret = vpif_check_format(ch, &common->fmt.fmt.pix); + if (ret < 0) + return ret; + + /* Call videobuf_streamon to start streaming in videobuf */ + ret = videobuf_streamon(&common->buffer_queue); + if (ret < 0) { + vpif_err("videobuf_streamon\n"); + return ret; + } + + mutex_lock_interruptible(&common->lock); + /* If buffer queue is empty, return error */ + if (list_empty(&common->dma_queue)) { + vpif_err("buffer queue is empty\n"); + ret = -EIO; + goto streamon_exit; + } + + /* Get the next frame from the buffer queue */ + common->next_frm = common->cur_frm = + list_entry(common->dma_queue.next, + struct videobuf_buffer, queue); + + list_del(&common->cur_frm->queue); + /* Mark state of the current frame to active */ + common->cur_frm->state = VIDEOBUF_ACTIVE; + + /* Initialize field_id and started member */ + ch->field_id = 0; + common->started = 1; + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + addr = common->cur_frm->boff; + /* Calculate the offset for Y and C data in the buffer */ + vpif_calculate_offsets(ch); + + if ((ch->vpifparams.std_info.frm_fmt && + ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) + && (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) + || (!ch->vpifparams.std_info.frm_fmt + && (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { + vpif_err("conflict in field format and std format\n"); + ret = -EINVAL; + goto streamon_exit; + } + + /* clock settings */ + ret = + vpif_config_data->set_clock(ch->vpifparams.std_info.ycmux_mode, + ch->vpifparams.std_info.hd_sd); + if (ret < 0) { + vpif_err("can't set clock\n"); + goto streamon_exit; + } + + /* set the parameters and addresses */ + ret = vpif_set_video_params(vpif, ch->channel_id + 2); + if (ret < 0) + goto streamon_exit; + + common->started = ret; + vpif_config_addr(ch, ret); + common->set_addr((addr + common->ytop_off), + (addr + common->ybtm_off), + (addr + common->ctop_off), + (addr + common->cbtm_off)); + + /* Set interrupt for both the fields in VPIF + Register enable channel in VPIF register */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + channel2_intr_assert(); + channel2_intr_enable(1); + enable_channel2(1); + } + + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) + || (common->started == 2)) { + channel3_intr_assert(); + channel3_intr_enable(1); + enable_channel3(1); + } + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; + } + +streamon_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + if (!common->started) { + vpif_err("channel->started\n"); + return -EINVAL; + } + + mutex_lock_interruptible(&common->lock); + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + /* disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + } + + common->started = 0; + mutex_unlock(&common->lock); + + return videobuf_streamoff(&common->buffer_queue); +} + +static int vpif_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != crop->type) + return -EINVAL; + + crop->bounds.left = crop->bounds.top = 0; + crop->defrect.left = crop->defrect.top = 0; + crop->defrect.height = crop->bounds.height = common->height; + crop->defrect.width = crop->bounds.width = common->width; + + return 0; +} + +static int vpif_enum_output(struct file *file, void *fh, + struct v4l2_output *output) +{ + + struct vpif_config *config = vpif_dev->platform_data; + + if (output->index >= config->output_count) { + vpif_dbg(1, debug, "Invalid output index\n"); + return -EINVAL; + } + + strcpy(output->name, config->output[output->index]); + output->type = V4L2_OUTPUT_TYPE_ANALOG; + output->std = DM646X_V4L2_STD; + + return 0; +} + +static int vpif_s_output(struct file *file, void *priv, unsigned int i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + mutex_lock_interruptible(&common->lock); + if (common->started) { + vpif_err("Streaming in progress\n"); + ret = -EBUSY; + goto s_output_exit; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_routing, 0, i, 0); + + if (ret < 0) + vpif_err("Failed to set output standard\n"); + + vid_ch->output_id = i; + +s_output_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_g_output(struct file *file, void *priv, unsigned int *i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + *i = vid_ch->output_id; + + return 0; +} + +static int vpif_g_priority(struct file *file, void *priv, enum v4l2_priority *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *p = v4l2_prio_max(&ch->prio); + + return 0; +} + +static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_prio_change(&ch->prio, &fh->prio, p); +} + +/* vpif display ioctl operations */ +static const struct v4l2_ioctl_ops vpif_ioctl_ops = { + .vidioc_querycap = vpif_querycap, + .vidioc_g_priority = vpif_g_priority, + .vidioc_s_priority = vpif_s_priority, + .vidioc_enum_fmt_vid_out = vpif_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vpif_g_fmt_vid_out, + .vidioc_s_fmt_vid_out = vpif_s_fmt_vid_out, + .vidioc_try_fmt_vid_out = vpif_try_fmt_vid_out, + .vidioc_reqbufs = vpif_reqbufs, + .vidioc_querybuf = vpif_querybuf, + .vidioc_qbuf = vpif_qbuf, + .vidioc_dqbuf = vpif_dqbuf, + .vidioc_streamon = vpif_streamon, + .vidioc_streamoff = vpif_streamoff, + .vidioc_s_std = vpif_s_std, + .vidioc_g_std = vpif_g_std, + .vidioc_enum_output = vpif_enum_output, + .vidioc_s_output = vpif_s_output, + .vidioc_g_output = vpif_g_output, + .vidioc_cropcap = vpif_cropcap, +}; + +static const struct v4l2_file_operations vpif_fops = { + .owner = THIS_MODULE, + .open = vpif_open, + .release = vpif_release, + .ioctl = video_ioctl2, + .mmap = vpif_mmap, + .poll = vpif_poll +}; + +static struct video_device vpif_video_template = { + .name = "vpif", + .fops = &vpif_fops, + .minor = -1, + .ioctl_ops = &vpif_ioctl_ops, + .tvnorms = DM646X_V4L2_STD, + .current_norm = V4L2_STD_625_50, + +}; + +/*Configure the channels, buffer sizei, request irq */ +static int initialize_vpif(void) +{ + int free_channel_objects_index; + int free_buffer_channel_index; + int free_buffer_index; + int err = 0, i, j; + + /* Default number of buffers should be 3 */ + if ((ch2_numbuffers > 0) && + (ch2_numbuffers < config_params.min_numbuffers)) + ch2_numbuffers = config_params.min_numbuffers; + if ((ch3_numbuffers > 0) && + (ch3_numbuffers < config_params.min_numbuffers)) + ch3_numbuffers = config_params.min_numbuffers; + + /* Set buffer size to min buffers size if invalid buffer size is + * given */ + if (ch2_bufsize < config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]) + ch2_bufsize = + config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]; + if (ch3_bufsize < config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]) + ch3_bufsize = + config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]; + + config_params.numbuffers[VPIF_CHANNEL2_VIDEO] = ch2_numbuffers; + + if (ch2_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL2_VIDEO] = + ch2_bufsize; + } + config_params.numbuffers[VPIF_CHANNEL3_VIDEO] = ch3_numbuffers; + + if (ch3_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL3_VIDEO] = + ch3_bufsize; + } + + /* Allocate memory for six channel objects */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + vpif_obj.dev[i] = + kmalloc(sizeof(struct channel_obj), GFP_KERNEL); + /* If memory allocation fails, return error */ + if (!vpif_obj.dev[i]) { + free_channel_objects_index = i; + err = -ENOMEM; + goto vpif_init_free_channel_objects; + } + } + + free_channel_objects_index = VPIF_DISPLAY_MAX_DEVICES; + free_buffer_channel_index = VPIF_DISPLAY_NUM_CHANNELS; + free_buffer_index = config_params.numbuffers[i - 1]; + + return 0; + +vpif_init_free_channel_objects: + for (j = 0; j < free_channel_objects_index; j++) + kfree(vpif_obj.dev[j]); + return err; +} + +/* + * vpif_probe: This function creates device entries by register itself to the + * V4L2 driver and initializes fields of each channel objects + */ +static __init int vpif_probe(struct platform_device *pdev) +{ + const struct subdev_info *subdevdata; + int i, j = 0, k, q, m, err = 0; + struct i2c_adapter *i2c_adap; + struct vpif_config *config; + struct common_obj *common; + struct channel_obj *ch; + struct video_device *vfd; + struct resource *res; + int subdev_count; + + vpif_dev = &pdev->dev; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + v4l2_err(vpif_dev->driver, + "Error getting platform resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res->start, res->end - res->start + 1, + vpif_dev->driver->name)) { + v4l2_err(vpif_dev->driver, "VPIF: failed request_mem_region\n"); + return -ENXIO; + } + + vpif_base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!vpif_base) { + v4l2_err(vpif_dev->driver, "Unable to ioremap VPIF reg\n"); + err = -ENXIO; + goto resource_exit; + } + + vpif_base_addr_init(vpif_base); + + initialize_vpif(); + + err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev); + if (err) { + v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n"); + return err; + } + + k = 0; + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, vpif_channel_isr, IRQF_DISABLED, + "DM646x_Display", + (void *)(&vpif_obj.dev[k]->channel_id))) { + err = -EBUSY; + goto vpif_int_err; + } + } + k++; + } + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (vfd == NULL) { + for (j = 0; j < i; j++) { + ch = vpif_obj.dev[j]; + video_device_release(ch->video_dev); + } + err = -ENOMEM; + goto video_dev_alloc_exit; + } + + /* Initialize field of video device */ + *vfd = vpif_video_template; + vfd->v4l2_dev = &vpif_obj.v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), + "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d", + (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff, + (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff, + (VPIF_DISPLAY_VERSION_CODE) & 0xff); + + /* Set video_dev to the video device */ + ch->video_dev = vfd; + } + + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + /* Initialize field of the channel objects */ + atomic_set(&ch->usrs, 0); + for (k = 0; k < VPIF_NUMOBJECTS; k++) { + ch->common[k].numbuffers = 0; + common = &ch->common[k]; + common->io_usrs = 0; + common->started = 0; + spin_lock_init(&common->irqlock); + mutex_init(&common->lock); + common->numbuffers = 0; + common->set_addr = NULL; + common->ytop_off = common->ybtm_off = 0; + common->ctop_off = common->cbtm_off = 0; + common->cur_frm = common->next_frm = NULL; + memset(&common->fmt, 0, sizeof(common->fmt)); + common->numbuffers = config_params.numbuffers[k]; + + } + ch->initialized = 0; + ch->channel_id = j; + if (j < 2) + ch->common[VPIF_VIDEO_INDEX].numbuffers = + config_params.numbuffers[ch->channel_id]; + else + ch->common[VPIF_VIDEO_INDEX].numbuffers = 0; + + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + + /* Initialize prio member of channel object */ + v4l2_prio_init(&ch->prio); + ch->common[VPIF_VIDEO_INDEX].fmt.type = + V4L2_BUF_TYPE_VIDEO_OUTPUT; + + /* register video device */ + vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", + (int)ch, (int)&ch->video_dev); + + err = video_register_device(ch->video_dev, + VFL_TYPE_GRABBER, (j ? 3 : 2)); + if (err < 0) + goto probe_out; + + video_set_drvdata(ch->video_dev, ch); + } + + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + subdev_count = config->subdev_count; + subdevdata = config->subdevinfo; + vpif_obj.sd = kmalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto probe_out; + } + + for (i = 0; i < subdev_count; i++) { + vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev, + i2c_adap, subdevdata[i].name, + subdevdata[i].name, + &subdevdata[i].addr); + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + + if (vpif_obj.sd[i]) + vpif_obj.sd[i]->grp_id = 1 << i; + } + + return 0; + +probe_subdev_out: + kfree(vpif_obj.sd); +probe_out: + for (k = 0; k < j; k++) { + ch = vpif_obj.dev[k]; + video_unregister_device(ch->video_dev); + video_device_release(ch->video_dev); + ch->video_dev = NULL; + } +vpif_int_err: + v4l2_device_unregister(&vpif_obj.v4l2_dev); + vpif_err("VPIF IRQ request failed\n"); + for (q = k; k >= 0; k--) { + for (m = i; m >= res->start; m--) + free_irq(m, (void *)(&vpif_obj.dev[k]->channel_id)); + res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1); + m = res->end; + } +video_dev_alloc_exit: + iounmap(vpif_base); +resource_exit: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + + return err; +} + +/* + * vpif_remove: It un-register channels from V4L2 driver + */ +static int vpif_remove(struct platform_device *device) +{ + struct channel_obj *ch; + int i; + + v4l2_device_unregister(&vpif_obj.v4l2_dev); + + /* un-register device */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + + ch->video_dev = NULL; + } + + return 0; +} + +static struct platform_driver vpif_driver = { + .driver = { + .name = "vpif_display", + .owner = THIS_MODULE, + }, + .probe = vpif_probe, + .remove = vpif_remove, +}; + +static __init int vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} + +/* + * vpif_cleanup: This function un-registers device and driver to the kernel, + * frees requested irq handler and de-allocates memory allocated for channel + * objects. + */ +static void vpif_cleanup(void) +{ + struct platform_device *pdev; + struct resource *res; + int irq_num; + int i = 0; + + pdev = container_of(vpif_dev, struct platform_device, dev); + + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, + (void *)(&vpif_obj.dev[i]->channel_id)); + i++; + } + + iounmap(vpif_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + platform_driver_unregister(&vpif_driver); + kfree(vpif_obj.sd); + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) + kfree(vpif_obj.dev[i]); +} + +module_init(vpif_init); +module_exit(vpif_cleanup); diff --git a/linux/drivers/media/video/davinci/vpif_display.h b/linux/drivers/media/video/davinci/vpif_display.h new file mode 100644 index 000000000..a2a7cd166 --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif_display.h @@ -0,0 +1,175 @@ +/* + * DM646x display header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DAVINCIHD_DISPLAY_H +#define DAVINCIHD_DISPLAY_H + +/* Header files */ +#include +#include +#include +#include +#include +#include + +#include "vpif.h" + +/* Macros */ +#define VPIF_MAJOR_RELEASE (0) +#define VPIF_MINOR_RELEASE (0) +#define VPIF_BUILD (1) + +#define VPIF_DISPLAY_VERSION_CODE \ + ((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD) + +#define VPIF_VALID_FIELD(field) \ + (((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \ + (((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \ + (V4L2_FIELD_SEQ_BT == field))) + +#define VPIF_DISPLAY_MAX_DEVICES (2) +#define VPIF_SLICED_BUF_SIZE (256) +#define VPIF_SLICED_MAX_SERVICES (3) +#define VPIF_VIDEO_INDEX (0) +#define VPIF_VBI_INDEX (1) +#define VPIF_HBI_INDEX (2) + +/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/ +#define VPIF_NUMOBJECTS (1) + +/* Macros */ +#define ISALIGNED(a) (0 == ((a) & 7)) + +/* enumerated data types */ +/* Enumerated data type to give id to each device per channel */ +enum vpif_channel_id { + VPIF_CHANNEL2_VIDEO = 0, /* Channel2 Video */ + VPIF_CHANNEL3_VIDEO, /* Channel3 Video */ +}; + +/* structures */ + +struct video_obj { + enum v4l2_field buf_field; + u32 latest_only; /* indicate whether to return + * most recent displayed frame only */ + v4l2_std_id stdid; /* Currently selected or default + * standard */ + u32 output_id; /* Current output id */ +}; + +struct vbi_obj { + int num_services; + struct vpif_vbi_params vbiparams; /* vpif parameters for the raw + * vbi data */ +}; + +struct common_obj { + /* Buffer specific parameters */ + u8 *fbuffers[VIDEO_MAX_FRAME]; /* List of buffer pointers for + * storing frames */ + u32 numbuffers; /* number of buffers */ + struct videobuf_buffer *cur_frm; /* Pointer pointing to current + * videobuf_buffer */ + struct videobuf_buffer *next_frm; /* Pointer pointing to next + * videobuf_buffer */ + enum v4l2_memory memory; /* This field keeps track of + * type of buffer exchange + * method user has selected */ + struct v4l2_format fmt; /* Used to store the format */ + struct videobuf_queue buffer_queue; /* Buffer queue used in + * video-buf */ + struct list_head dma_queue; /* Queue of filled frames */ + spinlock_t irqlock; /* Used in video-buf */ + + /* channel specific parameters */ + struct mutex lock; /* lock used to access this + * structure */ + u32 io_usrs; /* number of users performing + * IO */ + u8 started; /* Indicates whether streaming + * started */ + u32 ytop_off; /* offset of Y top from the + * starting of the buffer */ + u32 ybtm_off; /* offset of Y bottom from the + * starting of the buffer */ + u32 ctop_off; /* offset of C top from the + * starting of the buffer */ + u32 cbtm_off; /* offset of C bottom from the + * starting of the buffer */ + /* Function pointer to set the addresses */ + void (*set_addr) (unsigned long, unsigned long, + unsigned long, unsigned long); + u32 height; + u32 width; +}; + +struct channel_obj { + /* V4l2 specific parameters */ + struct video_device *video_dev; /* Identifies video device for + * this channel */ + struct v4l2_prio_state prio; /* Used to keep track of state of + * the priority */ + atomic_t usrs; /* number of open instances of + * the channel */ + u32 field_id; /* Indicates id of the field + * which is being displayed */ + u8 initialized; /* flag to indicate whether + * encoder is initialized */ + + enum vpif_channel_id channel_id;/* Identifies channel */ + struct vpif_params vpifparams; + struct common_obj common[VPIF_NUMOBJECTS]; + struct video_obj video; + struct vbi_obj vbi; +}; + +/* File handle structure */ +struct vpif_fh { + struct channel_obj *channel; /* pointer to channel object for + * opened device */ + u8 io_allowed[VPIF_NUMOBJECTS]; /* Indicates whether this file handle + * is doing IO */ + enum v4l2_priority prio; /* Used to keep track priority of + * this instance */ + u8 initialized; /* Used to keep track of whether this + * file handle has initialized + * channel or not */ +}; + +/* vpif device structure */ +struct vpif_device { + struct v4l2_device v4l2_dev; + struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS]; + struct v4l2_subdev **sd; + +}; + +struct vpif_config_params { + u32 min_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u32 channel_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u8 numbuffers[VPIF_DISPLAY_NUM_CHANNELS]; + u8 min_numbuffers; +}; + +/* Struct which keeps track of the line numbers for the sliced vbi service */ +struct vpif_service_line { + u16 service_id; + u16 service_line[2]; + u16 enc_service_id; + u8 bytestowrite; +}; + +#endif /* DAVINCIHD_DISPLAY_H */ -- cgit v1.2.3 From 3637f495560909953363d298dde4259e1c8ea46e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 9 Jun 2009 11:38:58 +0200 Subject: DaVinci: DM646x Video: Makefile and config files modifications for Display From: Chaithrika U S Makefile and Kconfig changes Modifies and adds the video Makefiles and Kconfig files to support DM646x Video display device Priority: normal Signed-off-by: Manjunath Hadli Signed-off-by: Brijesh Jadav Signed-off-by: Chaithrika U S Reviewed-by: Hans Verkuil Signed-off-by: Hans Verkuil --- linux/drivers/media/video/Kconfig | 22 ++++++++++++++++++++++ linux/drivers/media/video/Makefile | 2 ++ linux/drivers/media/video/davinci/Makefile | 9 +++++++++ 3 files changed, 33 insertions(+) create mode 100644 linux/drivers/media/video/davinci/Makefile (limited to 'linux') diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 061e147f6..15b4d3ad4 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -485,6 +485,28 @@ config VIDEO_UPD64083 endmenu # encoder / decoder chips +config DISPLAY_DAVINCI_DM646X_EVM + tristate "DM646x EVM Video Display" + depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303 + help + Support for DaVinci based display device. + + To compile this driver as a module, choose M here: the + module will be called davincihd_display. + +config VIDEO_DAVINCI_VPIF + tristate "DaVinci VPIF Driver" + depends on DISPLAY_DAVINCI_DM646X_EVM + help + Support for DaVinci VPIF Driver. + + To compile this driver as a module, choose M here: the + module will be called vpif. + config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 7fb3add1b..327138f26 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -159,6 +159,8 @@ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/video/davinci/Makefile b/linux/drivers/media/video/davinci/Makefile new file mode 100644 index 000000000..7fe9bce97 --- /dev/null +++ b/linux/drivers/media/video/davinci/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the davinci video device drivers. +# + +# VPIF +obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o + +#DM646x EVM Display driver +obj-$(CONFIG_DISPLAY_DAVINCI_DM646X_EVM) += vpif_display.o -- cgit v1.2.3 From e060bd6ae7ce4dee0f07e3ac5051de35b4908bd0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 22 Jun 2009 14:02:55 +0200 Subject: DaVinci: DM646x Video: Fix compile time warnings for mutex locking From: Chaithrika U S mutex_lock_interruptible return value has to be handled properly to indicate the status to the higher layers of the kernel. Priority: normal Signed-off-by: Chaithrika U S Signed-off-by: Hans Verkuil --- linux/drivers/media/video/davinci/vpif_display.c | 31 ++++++++++++++++++------ 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/davinci/vpif_display.c b/linux/drivers/media/video/davinci/vpif_display.c index 5e2b86b3f..969d4b3aa 100644 --- a/linux/drivers/media/video/davinci/vpif_display.c +++ b/linux/drivers/media/video/davinci/vpif_display.c @@ -636,7 +636,9 @@ static int vpif_release(struct file *filep) struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -720,7 +722,9 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, return -EINVAL; /* Fill in the information about format */ - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + if (vpif_get_std_info(ch)) { vpif_err("Error getting the standard info\n"); return -EINVAL; @@ -768,7 +772,9 @@ static int vpif_s_fmt_vid_out(struct file *file, void *priv, /* store the pix format in the channel object */ common->fmt.fmt.pix = *pixfmt; /* store the format in the channel object */ - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + common->fmt = *fmt; mutex_unlock(&common->lock); @@ -819,7 +825,9 @@ static int vpif_reqbufs(struct file *file, void *priv, index = VPIF_VIDEO_INDEX; common = &ch->common[index]; - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + if (common->fmt.type != reqbuf->type) { ret = -EINVAL; goto reqbuf_exit; @@ -979,7 +987,8 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) } /* Call encoder subdevice function to set the standard */ - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; ch->video.stdid = *std_id; /* Get the information about the standard */ @@ -1085,7 +1094,9 @@ static int vpif_streamon(struct file *file, void *priv, return ret; } - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + /* If buffer queue is empty, return error */ if (list_empty(&common->dma_queue)) { vpif_err("buffer queue is empty\n"); @@ -1185,7 +1196,9 @@ static int vpif_streamoff(struct file *file, void *priv, return -EINVAL; } - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { /* disable channel */ if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { @@ -1248,7 +1261,9 @@ static int vpif_s_output(struct file *file, void *priv, unsigned int i) struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; int ret = 0; - mutex_lock_interruptible(&common->lock); + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + if (common->started) { vpif_err("Streaming in progress\n"); ret = -EBUSY; -- cgit v1.2.3 From 2dfcd826496c586960e88da243e0a42c0ca322b8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 3 Jul 2009 15:36:18 -0300 Subject: em28xx: Add autodetection code for Silvercrest 1.3 mpix From: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/em28xx/em28xx-cards.c | 44 +++++++++++++++++++++++++ linux/drivers/media/video/em28xx/em28xx-i2c.c | 2 +- 2 files changed, 45 insertions(+), 1 deletion(-) (limited to 'linux') diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index e63c2e64e..928384e65 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -59,6 +59,8 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); +#define MT9V011_VERSION 0x8243 + /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -1771,6 +1773,46 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + if (dev->model != EM2820_BOARD_UNKNOWN) + return 0; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case MT9V011_VERSION: + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + break; + default: + printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -2482,6 +2524,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + em28xx_hint_sensor(dev); + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c index 24eebd4a3..91cff2af3 100644 --- a/linux/drivers/media/video/em28xx/em28xx-i2c.c +++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c @@ -489,7 +489,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", -- cgit v1.2.3 From 4a782628ed2966858fcf5acac0b890dea02c5b11 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 4 Jul 2009 08:03:48 -0300 Subject: mt9v011: properly calculate image resolution registers From: Mauro Carvalho Chehab Instead of working with a table of precalculated values, fill them with the proper values. Also, adds format functions that allow changing the resolution, by cropping the image to the center of the sensor. While here, move the sensor version check to the probe routine, to indicate to the caller if the sensor is not supported by this driver. Also, fixes a stupid bug where we're using &buffer[] instead of buffer[]. Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/mt9v011.c | 114 +++++++++++++++++++++++++++++------- 1 file changed, 94 insertions(+), 20 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/mt9v011.c b/linux/drivers/media/video/mt9v011.c index d3f2b4dc5..17a4fa386 100644 --- a/linux/drivers/media/video/mt9v011.c +++ b/linux/drivers/media/video/mt9v011.c @@ -66,6 +66,7 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = { struct mt9v011 { struct v4l2_subdev sd; + unsigned width, height; u16 global_gain, red_bal, blue_bal; }; @@ -113,7 +114,7 @@ static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, v4l2_dbg(2, debug, sd, "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); - rc = i2c_master_send(c, &buffer, 3); + rc = i2c_master_send(c, buffer, 3); if (rc != 3) v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 3)\n", rc); @@ -133,12 +134,6 @@ static const struct i2c_reg_value mt9v011_init_default[] = { { R0D_MT9V011_RESET, 0x0001 }, { R0D_MT9V011_RESET, 0x0000 }, - { R01_MT9V011_ROWSTART, 0x0008 }, - { R02_MT9V011_COLSTART, 0x0014 }, - { R03_MT9V011_HEIGHT, 0x01e0 }, - { R04_MT9V011_WIDTH, 0x0280 }, - { R05_MT9V011_HBLANK, 0x007b }, - { R06_MT9V011_VBLANK, 0x001c }, { R09_MT9V011_SHUTTER_WIDTH, 0x0418 }, { R0A_MT9V011_CLK_SPEED, 0x0000 }, { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, @@ -181,25 +176,40 @@ static void set_balance(struct v4l2_subdev *sd) mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); } +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (640 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); +}; + static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) { - u16 version; int i; - version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); - - if (version != MT9V011_VERSION) { - v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", - version); - return -EINVAL; - - } - for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) mt9v011_write(sd, mt9v011_init_default[i].reg, mt9v011_init_default[i].value); set_balance(sd); + set_res(sd); return 0; }; @@ -260,6 +270,50 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) return 0; } +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + + #ifdef CONFIG_VIDEO_ADV_DEBUG static int mt9v011_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) @@ -313,8 +367,15 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = { #endif }; +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + static const struct v4l2_subdev_ops mt9v011_ops = { - .core = &mt9v011_core_ops, + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, }; @@ -325,6 +386,7 @@ static const struct v4l2_subdev_ops mt9v011_ops = { static int mt9v011_probe(struct i2c_client *c, const struct i2c_device_id *id) { + u16 version; struct mt9v011 *core; struct v4l2_subdev *sd; @@ -337,10 +399,22 @@ static int mt9v011_probe(struct i2c_client *c, if (!core) return -ENOMEM; - core->global_gain = 0x0024; - sd = &core->sd; v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + v4l_info(c, "chip found @ 0x%02x (%s)\n", c->addr << 1, c->adapter->name); -- cgit v1.2.3 From 6dfa16c1aa732ce5a5c0f0404e70ed2d65675b6b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 4 Jul 2009 08:15:11 -0300 Subject: mt9v011: let's stick with datasheet values where it works From: Mauro Carvalho Chehab The original driver for Silvercrest cameras were using some values that are different from what datasheet says. As result, it was taken very less snapshots per second than expected. A test with the datasheet values showed that they work fine and give a better frame rate. So, let's stick with datasheet values. Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/mt9v011.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/mt9v011.c b/linux/drivers/media/video/mt9v011.c index 17a4fa386..505529e3e 100644 --- a/linux/drivers/media/video/mt9v011.c +++ b/linux/drivers/media/video/mt9v011.c @@ -134,24 +134,12 @@ static const struct i2c_reg_value mt9v011_init_default[] = { { R0D_MT9V011_RESET, 0x0001 }, { R0D_MT9V011_RESET, 0x0000 }, - { R09_MT9V011_SHUTTER_WIDTH, 0x0418 }, - { R0A_MT9V011_CLK_SPEED, 0x0000 }, { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, - { R20_MT9V011_READ_MODE, 0x1100 }, - - /* - * Those registers are not docummented at the datasheet. - * However, the original driver initializes them - */ - { 0x30, 0x0005 }, - { 0x34, 0x0100 }, - { 0x3d, 0x068f }, - { 0x40, 0x01e0 }, - { 0x52, 0x0100 }, - { 0x58, 0x0038 }, /* Datasheet default 0x0078 */ - { 0x59, 0x0723 }, /* Datasheet default 0x0703 */ - { 0x62, 0x041a }, /* Datasheet default 0x0418 */ + { R20_MT9V011_READ_MODE, 0x1000 }, { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ }; @@ -187,6 +175,9 @@ static void set_res(struct v4l2_subdev *sd) * hblank and vblank should be adjusted, in order to warrant that * we'll preserve the line timings for 30 fps, no matter what resolution * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. */ hstart = 14 + (640 - core->width) / 2; -- cgit v1.2.3