From 9d84ca95c6e87ea6c4b03fbd781e4a80be99cae2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Sep 2009 01:38:58 -0300 Subject: Backport a small trival change at dvb_net return code From: Mauro Carvalho Chehab kernel-sync: Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-core/dvb_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'linux') diff --git a/linux/drivers/media/dvb/dvb-core/dvb_net.c b/linux/drivers/media/dvb/dvb-core/dvb_net.c index 1eede48a9..d2d33cda9 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_net.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_net.c @@ -971,7 +971,7 @@ static int dvb_net_sec_callback(const u8 *buffer1, size_t buffer1_len, static int dvb_net_tx(struct sk_buff *skb, struct net_device *dev) { dev_kfree_skb(skb); - return 0; + return NETDEV_TX_OK; } static u8 mask_normal[6]={0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -- cgit v1.2.3 From f90000c87dfbaa497418c7b1550bb88596fa3f0c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Sep 2009 01:42:56 -0300 Subject: Backport a few fixes needed do be done at -git to properly compile things From: Mauro Carvalho Chehab kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab --- linux/Documentation/DocBook/Makefile | 8 ++++++-- linux/drivers/media/video/v4l2-device.c | 2 +- linux/drivers/staging/cx25821/Makefile | 1 + 3 files changed, 8 insertions(+), 3 deletions(-) (limited to 'linux') diff --git a/linux/Documentation/DocBook/Makefile b/linux/Documentation/DocBook/Makefile index ad07875fe..ab8300f67 100644 --- a/linux/Documentation/DocBook/Makefile +++ b/linux/Documentation/DocBook/Makefile @@ -32,7 +32,7 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -45,12 +45,16 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS)) pdfdocs: $(PDF) HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS))) -htmldocs: $(HTML) +htmldocs: media $(HTML) $(call build_main_index) MAN := $(patsubst %.xml, %.9, $(BOOKS)) mandocs: $(MAN) +media: + mkdir -p $(srctree)/Documentation/DocBook/media/ + cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/ + installmandocs: mandocs mkdir -p /usr/local/man/man9/ install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/ diff --git a/linux/drivers/media/video/v4l2-device.c b/linux/drivers/media/video/v4l2-device.c index 655d19cd6..016c62f6c 100644 --- a/linux/drivers/media/video/v4l2-device.c +++ b/linux/drivers/media/video/v4l2-device.c @@ -86,7 +86,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) /* Unregister subdevs */ list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) { v4l2_device_unregister_subdev(sd); -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) { struct i2c_client *client = v4l2_get_subdevdata(sd); diff --git a/linux/drivers/staging/cx25821/Makefile b/linux/drivers/staging/cx25821/Makefile index 2029cd046..10f87f05d 100644 --- a/linux/drivers/staging/cx25821/Makefile +++ b/linux/drivers/staging/cx25821/Makefile @@ -9,5 +9,6 @@ obj-$(CONFIG_VIDEO_CX25821) += cx25821.o obj-$(CONFIG_VIDEO_CX25821_ALSA) += cx25821-alsa.o EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends -- cgit v1.2.3 From 97e05856a8d5ab4df801c69309ad4a1dff81ce12 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Sep 2009 11:17:54 -0300 Subject: Add the DTV_ISDB_TS_ID property for ISDB_S From: HIRANO Takahito In ISDB-S, time-devision duplex is used to multiplexing several waves in the same frequency. Each wave is identified by its own transport stream ID, or TS ID. We need to provide some way to specify this ID from user applications to handle ISDB-S frontends. This code has been tested with the Earthsoft PT1 driver. Priority: normal [mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID] Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-core/dvb_frontend.c | 8 ++++++++ linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 3 +++ linux/include/linux/dvb/frontend.h | 4 +++- 3 files changed, 14 insertions(+), 1 deletion(-) (limited to 'linux') diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c index 2409586d3..b1a481ed3 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1042,6 +1042,8 @@ static struct dtv_cmds_h dtv_cmds[] = { _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 0, 0), _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0), + _DTV_CMD(DTV_ISDBS_TS_ID, 1, 0), + /* Get */ [DTV_DISEQC_SLAVE_REPLY] = { .name = "DTV_DISEQC_SLAVE_REPLY", @@ -1431,6 +1433,9 @@ static int dtv_property_process_get(struct dvb_frontend *fe, case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: tvp->u.data = fe->dtv_property_cache.layer[2].interleaving; break; + case DTV_ISDBS_TS_ID: + tvp->u.data = fe->dtv_property_cache.isdbs_ts_id; + break; default: r = -1; } @@ -1582,6 +1587,9 @@ static int dtv_property_process_set(struct dvb_frontend *fe, case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: fe->dtv_property_cache.layer[2].interleaving = tvp->u.data; break; + case DTV_ISDBS_TS_ID: + fe->dtv_property_cache.isdbs_ts_id = tvp->u.data; + break; default: r = -1; } diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.h b/linux/drivers/media/dvb/dvb-core/dvb_frontend.h index 9e46f1772..810f07d63 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -355,6 +355,9 @@ struct dtv_frontend_properties { fe_modulation_t modulation; u8 interleaving; } layer[3]; + + /* ISDB-T specifics */ + u32 isdbs_ts_id; }; struct dvb_frontend { diff --git a/linux/include/linux/dvb/frontend.h b/linux/include/linux/dvb/frontend.h index 25b01c147..b6cb5425c 100644 --- a/linux/include/linux/dvb/frontend.h +++ b/linux/include/linux/dvb/frontend.h @@ -302,7 +302,9 @@ struct dvb_frontend_event { #define DTV_ISDBT_LAYER_ENABLED 41 -#define DTV_MAX_COMMAND DTV_ISDBT_LAYER_ENABLED +#define DTV_ISDBS_TS_ID 42 + +#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID typedef enum fe_pilot { PILOT_ON, -- cgit v1.2.3 From f4e6f03be3f22d5b940f90053ccbf5c10e8ad54a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Sep 2009 15:24:21 -0300 Subject: Remove duplicated file From: Mauro Carvalho Chehab Priority: normal Signed-off-by: Mauro Carvalho Chehab --- linux/linux/drivers/staging/tm6000/tm6000-alsa.c | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 linux/linux/drivers/staging/tm6000/tm6000-alsa.c (limited to 'linux') diff --git a/linux/linux/drivers/staging/tm6000/tm6000-alsa.c b/linux/linux/drivers/staging/tm6000/tm6000-alsa.c deleted file mode 100644 index e69de29bb..000000000 -- cgit v1.2.3 From a2bc08a4bec0c13d9133e5151f68cc58f9f51c39 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 23 Aug 2009 03:51:22 +0000 Subject: Add a driver for Earthsoft PT1 From: Mauro Carvalho Chehab Add a driver for Earthsoft PT1 Eearthsoft PT1 is a PCI card for Japanese broadcasting with two ISDB-S and ISDB-T demodulators. This card has neither MPEG decoder nor conditional access module onboard. It transmits only compressed and possibly encrypted MPEG data over the PCI bus, so you need an external software decoder and a decrypter to watch TV on your computer. This driver is originally developed by Tomoaki Ishikawa by reverse engineering. Priority: normal [mchehab@redhat.com: renamed isdb_ts to isdbs_ts to use the current standard] Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/Kconfig | 4 + linux/drivers/media/dvb/Makefile | 2 +- linux/drivers/media/dvb/pt1/Kconfig | 12 + linux/drivers/media/dvb/pt1/Makefile | 5 + linux/drivers/media/dvb/pt1/pt1.c | 1056 ++++++++++++++++++++++++++++ linux/drivers/media/dvb/pt1/va1j5jf8007s.c | 658 +++++++++++++++++ linux/drivers/media/dvb/pt1/va1j5jf8007s.h | 40 ++ linux/drivers/media/dvb/pt1/va1j5jf8007t.c | 468 ++++++++++++ linux/drivers/media/dvb/pt1/va1j5jf8007t.h | 40 ++ 9 files changed, 2284 insertions(+), 1 deletion(-) create mode 100644 linux/drivers/media/dvb/pt1/Kconfig create mode 100644 linux/drivers/media/dvb/pt1/Makefile create mode 100644 linux/drivers/media/dvb/pt1/pt1.c create mode 100644 linux/drivers/media/dvb/pt1/va1j5jf8007s.c create mode 100644 linux/drivers/media/dvb/pt1/va1j5jf8007s.h create mode 100644 linux/drivers/media/dvb/pt1/va1j5jf8007t.c create mode 100644 linux/drivers/media/dvb/pt1/va1j5jf8007t.h (limited to 'linux') diff --git a/linux/drivers/media/dvb/Kconfig b/linux/drivers/media/dvb/Kconfig index 1d0e4b1ef..35d081712 100644 --- a/linux/drivers/media/dvb/Kconfig +++ b/linux/drivers/media/dvb/Kconfig @@ -68,6 +68,10 @@ comment "Supported FireWire (IEEE 1394) Adapters" depends on DVB_CORE && IEEE1394 source "drivers/media/dvb/firewire/Kconfig" +comment "Supported Earthsoft PT1 Adapters" + depends on DVB_CORE && PCI && I2C +source "drivers/media/dvb/pt1/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/linux/drivers/media/dvb/Makefile b/linux/drivers/media/dvb/Makefile index 6092a5bb5..16d262ddb 100644 --- a/linux/drivers/media/dvb/Makefile +++ b/linux/drivers/media/dvb/Makefile @@ -2,6 +2,6 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/linux/drivers/media/dvb/pt1/Kconfig b/linux/drivers/media/dvb/pt1/Kconfig new file mode 100644 index 000000000..24501d5bf --- /dev/null +++ b/linux/drivers/media/dvb/pt1/Kconfig @@ -0,0 +1,12 @@ +config DVB_PT1 + tristate "PT1 cards" + depends on DVB_CORE && PCI && I2C + help + Support for Earthsoft PT1 PCI cards. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. + diff --git a/linux/drivers/media/dvb/pt1/Makefile b/linux/drivers/media/dvb/pt1/Makefile new file mode 100644 index 000000000..a66da17bb --- /dev/null +++ b/linux/drivers/media/dvb/pt1/Makefile @@ -0,0 +1,5 @@ +earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o + +obj-$(CONFIG_DVB_PT1) += earth-pt1.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends diff --git a/linux/drivers/media/dvb/pt1/pt1.c b/linux/drivers/media/dvb/pt1/pt1.c new file mode 100644 index 000000000..ef0f7d235 --- /dev/null +++ b/linux/drivers/media/dvb/pt1/pt1.c @@ -0,0 +1,1056 @@ +/* + * driver for Earthsoft PT1 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dmxdev.h" +#include "dvb_net.h" +#include "dvb_frontend.h" + +#include "va1j5jf8007t.h" +#include "va1j5jf8007s.h" + +#define DRIVER_NAME "earth-pt1" + +#define PT1_PAGE_SHIFT 12 +#define PT1_PAGE_SIZE (1 << PT1_PAGE_SHIFT) +#define PT1_NR_UPACKETS 1024 +#define PT1_NR_BUFS 511 + +struct pt1_buffer_page { + __le32 upackets[PT1_NR_UPACKETS]; +}; + +struct pt1_table_page { + __le32 next_pfn; + __le32 buf_pfns[PT1_NR_BUFS]; +}; + +struct pt1_buffer { + struct pt1_buffer_page *page; + dma_addr_t addr; +}; + +struct pt1_table { + struct pt1_table_page *page; + dma_addr_t addr; + struct pt1_buffer bufs[PT1_NR_BUFS]; +}; + +#define PT1_NR_ADAPS 4 + +struct pt1_adapter; + +struct pt1 { + struct pci_dev *pdev; + void __iomem *regs; + struct i2c_adapter i2c_adap; + int i2c_running; + struct pt1_adapter *adaps[PT1_NR_ADAPS]; + struct pt1_table *tables; + struct task_struct *kthread; +}; + +struct pt1_adapter { + struct pt1 *pt1; + int index; + + u8 *buf; + int upacket_count; + int packet_count; + + struct dvb_adapter adap; + struct dvb_demux demux; + int users; + struct dmxdev dmxdev; + struct dvb_net net; + struct dvb_frontend *fe; + int (*orig_set_voltage)(struct dvb_frontend *fe, + fe_sec_voltage_t voltage); +}; + +#define pt1_printk(level, pt1, format, arg...) \ + dev_printk(level, &(pt1)->pdev->dev, format, ##arg) + +static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data) +{ + writel(data, pt1->regs + reg * 4); +} + +static u32 pt1_read_reg(struct pt1 *pt1, int reg) +{ + return readl(pt1->regs + reg * 4); +} + +static int pt1_nr_tables = 64; +module_param_named(nr_tables, pt1_nr_tables, int, 0); + +static void pt1_increment_table_count(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x00000020); +} + +static void pt1_init_table_count(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x00000010); +} + +static void pt1_register_tables(struct pt1 *pt1, u32 first_pfn) +{ + pt1_write_reg(pt1, 5, first_pfn); + pt1_write_reg(pt1, 0, 0x0c000040); +} + +static void pt1_unregister_tables(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x08080000); +} + +static int pt1_sync(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 57; i++) { + if (pt1_read_reg(pt1, 0) & 0x20000000) + return 0; + pt1_write_reg(pt1, 0, 0x00000008); + } + pt1_printk(KERN_ERR, pt1, "could not sync\n"); + return -EIO; +} + +static u64 pt1_identify(struct pt1 *pt1) +{ + int i; + u64 id; + id = 0; + for (i = 0; i < 57; i++) { + id |= (u64)(pt1_read_reg(pt1, 0) >> 30 & 1) << i; + pt1_write_reg(pt1, 0, 0x00000008); + } + return id; +} + +static int pt1_unlock(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x00000008); + for (i = 0; i < 3; i++) { + if (pt1_read_reg(pt1, 0) & 0x80000000) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not unlock\n"); + return -EIO; +} + +static int pt1_reset_pci(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x01010000); + pt1_write_reg(pt1, 0, 0x01000000); + for (i = 0; i < 10; i++) { + if (pt1_read_reg(pt1, 0) & 0x00000001) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not reset PCI\n"); + return -EIO; +} + +static int pt1_reset_ram(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x02020000); + pt1_write_reg(pt1, 0, 0x02000000); + for (i = 0; i < 10; i++) { + if (pt1_read_reg(pt1, 0) & 0x00000002) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not reset RAM\n"); + return -EIO; +} + +static int pt1_do_enable_ram(struct pt1 *pt1) +{ + int i, j; + u32 status; + status = pt1_read_reg(pt1, 0) & 0x00000004; + pt1_write_reg(pt1, 0, 0x00000002); + for (i = 0; i < 10; i++) { + for (j = 0; j < 1024; j++) { + if ((pt1_read_reg(pt1, 0) & 0x00000004) != status) + return 0; + } + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not enable RAM\n"); + return -EIO; +} + +static int pt1_enable_ram(struct pt1 *pt1) +{ + int i, ret; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + for (i = 0; i < 10; i++) { + ret = pt1_do_enable_ram(pt1); + if (ret < 0) + return ret; + } + return 0; +} + +static void pt1_disable_ram(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x0b0b0000); +} + +static void pt1_set_stream(struct pt1 *pt1, int index, int enabled) +{ + pt1_write_reg(pt1, 2, 1 << (index + 8) | enabled << index); +} + +static void pt1_init_streams(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_set_stream(pt1, i, 0); +} + +static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) +{ + u32 upacket; + int i; + int index; + struct pt1_adapter *adap; + int offset; + u8 *buf; + + if (!page->upackets[PT1_NR_UPACKETS - 1]) + return 0; + + for (i = 0; i < PT1_NR_UPACKETS; i++) { + upacket = le32_to_cpu(page->upackets[i]); + index = (upacket >> 29) - 1; + if (index < 0 || index >= PT1_NR_ADAPS) + continue; + + adap = pt1->adaps[index]; + if (upacket >> 25 & 1) + adap->upacket_count = 0; + else if (!adap->upacket_count) + continue; + + buf = adap->buf; + offset = adap->packet_count * 188 + adap->upacket_count * 3; + buf[offset] = upacket >> 16; + buf[offset + 1] = upacket >> 8; + if (adap->upacket_count != 62) + buf[offset + 2] = upacket; + + if (++adap->upacket_count >= 63) { + adap->upacket_count = 0; + if (++adap->packet_count >= 21) { + dvb_dmx_swfilter_packets(&adap->demux, buf, 21); + adap->packet_count = 0; + } + } + } + + page->upackets[PT1_NR_UPACKETS - 1] = 0; + return 1; +} + +static int pt1_thread(void *data) +{ + struct pt1 *pt1; + int table_index; + int buf_index; + struct pt1_buffer_page *page; + + pt1 = data; + set_freezable(); + + table_index = 0; + buf_index = 0; + + while (!kthread_should_stop()) { + try_to_freeze(); + + page = pt1->tables[table_index].bufs[buf_index].page; + if (!pt1_filter(pt1, page)) { + schedule_timeout_interruptible((HZ + 999) / 1000); + continue; + } + + if (++buf_index >= PT1_NR_BUFS) { + pt1_increment_table_count(pt1); + buf_index = 0; + if (++table_index >= pt1_nr_tables) + table_index = 0; + } + } + + return 0; +} + +static void pt1_free_page(struct pt1 *pt1, void *page, dma_addr_t addr) +{ + dma_free_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, page, addr); +} + +static void *pt1_alloc_page(struct pt1 *pt1, dma_addr_t *addrp, u32 *pfnp) +{ + void *page; + dma_addr_t addr; + + page = dma_alloc_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, &addr, + GFP_KERNEL); + if (page == NULL) + return NULL; + + BUG_ON(addr & (PT1_PAGE_SIZE - 1)); + BUG_ON(addr >> PT1_PAGE_SHIFT >> 31 >> 1); + + *addrp = addr; + *pfnp = addr >> PT1_PAGE_SHIFT; + return page; +} + +static void pt1_cleanup_buffer(struct pt1 *pt1, struct pt1_buffer *buf) +{ + pt1_free_page(pt1, buf->page, buf->addr); +} + +static int +pt1_init_buffer(struct pt1 *pt1, struct pt1_buffer *buf, u32 *pfnp) +{ + struct pt1_buffer_page *page; + dma_addr_t addr; + + page = pt1_alloc_page(pt1, &addr, pfnp); + if (page == NULL) + return -ENOMEM; + + page->upackets[PT1_NR_UPACKETS - 1] = 0; + + buf->page = page; + buf->addr = addr; + return 0; +} + +static void pt1_cleanup_table(struct pt1 *pt1, struct pt1_table *table) +{ + int i; + + for (i = 0; i < PT1_NR_BUFS; i++) + pt1_cleanup_buffer(pt1, &table->bufs[i]); + + pt1_free_page(pt1, table->page, table->addr); +} + +static int +pt1_init_table(struct pt1 *pt1, struct pt1_table *table, u32 *pfnp) +{ + struct pt1_table_page *page; + dma_addr_t addr; + int i, ret; + u32 buf_pfn; + + page = pt1_alloc_page(pt1, &addr, pfnp); + if (page == NULL) + return -ENOMEM; + + for (i = 0; i < PT1_NR_BUFS; i++) { + ret = pt1_init_buffer(pt1, &table->bufs[i], &buf_pfn); + if (ret < 0) + goto err; + + page->buf_pfns[i] = cpu_to_le32(buf_pfn); + } + + pt1_increment_table_count(pt1); + table->page = page; + table->addr = addr; + return 0; + +err: + while (i--) + pt1_cleanup_buffer(pt1, &table->bufs[i]); + + pt1_free_page(pt1, page, addr); + return ret; +} + +static void pt1_cleanup_tables(struct pt1 *pt1) +{ + struct pt1_table *tables; + int i; + + tables = pt1->tables; + pt1_unregister_tables(pt1); + + for (i = 0; i < pt1_nr_tables; i++) + pt1_cleanup_table(pt1, &tables[i]); + + vfree(tables); +} + +static int pt1_init_tables(struct pt1 *pt1) +{ + struct pt1_table *tables; + int i, ret; + u32 first_pfn, pfn; + + tables = vmalloc(sizeof(struct pt1_table) * pt1_nr_tables); + if (tables == NULL) + return -ENOMEM; + + pt1_init_table_count(pt1); + + i = 0; + if (pt1_nr_tables) { + ret = pt1_init_table(pt1, &tables[0], &first_pfn); + if (ret) + goto err; + i++; + } + + while (i < pt1_nr_tables) { + ret = pt1_init_table(pt1, &tables[i], &pfn); + if (ret) + goto err; + tables[i - 1].page->next_pfn = cpu_to_le32(pfn); + i++; + } + + tables[pt1_nr_tables - 1].page->next_pfn = cpu_to_le32(first_pfn); + + pt1_register_tables(pt1, first_pfn); + pt1->tables = tables; + return 0; + +err: + while (i--) + pt1_cleanup_table(pt1, &tables[i]); + + vfree(tables); + return ret; +} + +static int pt1_start_feed(struct dvb_demux_feed *feed) +{ + struct pt1_adapter *adap; + adap = container_of(feed->demux, struct pt1_adapter, demux); + if (!adap->users++) + pt1_set_stream(adap->pt1, adap->index, 1); + return 0; +} + +static int pt1_stop_feed(struct dvb_demux_feed *feed) +{ + struct pt1_adapter *adap; + adap = container_of(feed->demux, struct pt1_adapter, demux); + if (!--adap->users) + pt1_set_stream(adap->pt1, adap->index, 0); + return 0; +} + +static void +pt1_set_power(struct pt1 *pt1, int power, int lnb, int reset) +{ + pt1_write_reg(pt1, 1, power | lnb << 1 | !reset << 3); +} + +static int pt1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct pt1_adapter *adap; + int lnb; + + adap = container_of(fe->dvb, struct pt1_adapter, adap); + + switch (voltage) { + case SEC_VOLTAGE_13: /* actually 11V */ + lnb = 2; + break; + case SEC_VOLTAGE_18: /* actually 15V */ + lnb = 3; + break; + case SEC_VOLTAGE_OFF: + lnb = 0; + break; + default: + return -EINVAL; + } + + pt1_set_power(adap->pt1, 1, lnb, 0); + + if (adap->orig_set_voltage) + return adap->orig_set_voltage(fe, voltage); + else + return 0; +} + +static void pt1_free_adapter(struct pt1_adapter *adap) +{ + dvb_unregister_frontend(adap->fe); + dvb_net_release(&adap->net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + dvb_unregister_adapter(&adap->adap); + free_page((unsigned long)adap->buf); + kfree(adap); +} + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static struct pt1_adapter * +pt1_alloc_adapter(struct pt1 *pt1, struct dvb_frontend *fe) +{ + struct pt1_adapter *adap; + void *buf; + struct dvb_adapter *dvb_adap; + struct dvb_demux *demux; + struct dmxdev *dmxdev; + int ret; + + adap = kzalloc(sizeof(struct pt1_adapter), GFP_KERNEL); + if (!adap) { + ret = -ENOMEM; + goto err; + } + + adap->pt1 = pt1; + + adap->orig_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = pt1_set_voltage; + + buf = (u8 *)__get_free_page(GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto err_kfree; + } + + adap->buf = buf; + adap->upacket_count = 0; + adap->packet_count = 0; + + dvb_adap = &adap->adap; + dvb_adap->priv = adap; + ret = dvb_register_adapter(dvb_adap, DRIVER_NAME, THIS_MODULE, + &pt1->pdev->dev, adapter_nr); + if (ret < 0) + goto err_free_page; + + demux = &adap->demux; + demux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + demux->priv = adap; + demux->feednum = 256; + demux->filternum = 256; + demux->start_feed = pt1_start_feed; + demux->stop_feed = pt1_stop_feed; + demux->write_to_decoder = NULL; + ret = dvb_dmx_init(demux); + if (ret < 0) + goto err_unregister_adapter; + + dmxdev = &adap->dmxdev; + dmxdev->filternum = 256; + dmxdev->demux = &demux->dmx; + dmxdev->capabilities = 0; + ret = dvb_dmxdev_init(dmxdev, dvb_adap); + if (ret < 0) + goto err_dmx_release; + + dvb_net_init(dvb_adap, &adap->net, &demux->dmx); + + ret = dvb_register_frontend(dvb_adap, fe); + if (ret < 0) + goto err_net_release; + adap->fe = fe; + + return adap; + +err_net_release: + dvb_net_release(&adap->net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); +err_dmx_release: + dvb_dmx_release(demux); +err_unregister_adapter: + dvb_unregister_adapter(dvb_adap); +err_free_page: + free_page((unsigned long)buf); +err_kfree: + kfree(adap); +err: + return ERR_PTR(ret); +} + +static void pt1_cleanup_adapters(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_free_adapter(pt1->adaps[i]); +} + +struct pt1_config { + struct va1j5jf8007s_config va1j5jf8007s_config; + struct va1j5jf8007t_config va1j5jf8007t_config; +}; + +static const struct pt1_config pt1_configs[2] = { + { + { .demod_address = 0x1b }, + { .demod_address = 0x1a }, + }, { + { .demod_address = 0x19 }, + { .demod_address = 0x18 }, + }, +}; + +static int pt1_init_adapters(struct pt1 *pt1) +{ + int i, j; + struct i2c_adapter *i2c_adap; + const struct pt1_config *config; + struct dvb_frontend *fe[4]; + struct pt1_adapter *adap; + int ret; + + i = 0; + j = 0; + + i2c_adap = &pt1->i2c_adap; + do { + config = &pt1_configs[i / 2]; + + fe[i] = va1j5jf8007s_attach(&config->va1j5jf8007s_config, + i2c_adap); + if (!fe[i]) { + ret = -ENODEV; /* This does not sound nice... */ + goto err; + } + i++; + + fe[i] = va1j5jf8007t_attach(&config->va1j5jf8007t_config, + i2c_adap); + if (!fe[i]) { + ret = -ENODEV; + goto err; + } + i++; + + ret = va1j5jf8007s_prepare(fe[i - 2]); + if (ret < 0) + goto err; + + ret = va1j5jf8007t_prepare(fe[i - 1]); + if (ret < 0) + goto err; + + } while (i < 4); + + do { + adap = pt1_alloc_adapter(pt1, fe[j]); + if (IS_ERR(adap)) + goto err; + adap->index = j; + pt1->adaps[j] = adap; + } while (++j < 4); + + return 0; + +err: + while (i-- > j) + fe[i]->ops.release(fe[i]); + + while (j--) + pt1_free_adapter(pt1->adaps[j]); + + return ret; +} + +static void pt1_i2c_emit(struct pt1 *pt1, int addr, int busy, int read_enable, + int clock, int data, int next_addr) +{ + pt1_write_reg(pt1, 4, addr << 18 | busy << 13 | read_enable << 12 | + !clock << 11 | !data << 10 | next_addr); +} + +static void pt1_i2c_write_bit(struct pt1 *pt1, int addr, int *addrp, int data) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, data, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, data, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, data, addr + 3); + *addrp = addr + 3; +} + +static void pt1_i2c_read_bit(struct pt1 *pt1, int addr, int *addrp) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 1, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 1, 1, 1, addr + 3); + pt1_i2c_emit(pt1, addr + 3, 1, 0, 0, 1, addr + 4); + *addrp = addr + 4; +} + +static void pt1_i2c_write_byte(struct pt1 *pt1, int addr, int *addrp, int data) +{ + int i; + for (i = 0; i < 8; i++) + pt1_i2c_write_bit(pt1, addr, &addr, data >> (7 - i) & 1); + pt1_i2c_write_bit(pt1, addr, &addr, 1); + *addrp = addr; +} + +static void pt1_i2c_read_byte(struct pt1 *pt1, int addr, int *addrp, int last) +{ + int i; + for (i = 0; i < 8; i++) + pt1_i2c_read_bit(pt1, addr, &addr); + pt1_i2c_write_bit(pt1, addr, &addr, last); + *addrp = addr; +} + +static void pt1_i2c_prepare(struct pt1 *pt1, int addr, int *addrp) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 1, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, 0, addr + 3); + *addrp = addr + 3; +} + +static void +pt1_i2c_write_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg) +{ + int i; + pt1_i2c_prepare(pt1, addr, &addr); + pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1); + for (i = 0; i < msg->len; i++) + pt1_i2c_write_byte(pt1, addr, &addr, msg->buf[i]); + *addrp = addr; +} + +static void +pt1_i2c_read_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg) +{ + int i; + pt1_i2c_prepare(pt1, addr, &addr); + pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1 | 1); + for (i = 0; i < msg->len; i++) + pt1_i2c_read_byte(pt1, addr, &addr, i == msg->len - 1); + *addrp = addr; +} + +static int pt1_i2c_end(struct pt1 *pt1, int addr) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, 0, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 1, 1, 0); + + pt1_write_reg(pt1, 0, 0x00000004); + do { + if (signal_pending(current)) + return -EINTR; + schedule_timeout_interruptible((HZ + 999) / 1000); + } while (pt1_read_reg(pt1, 0) & 0x00000080); + return 0; +} + +static void pt1_i2c_begin(struct pt1 *pt1, int *addrp) +{ + int addr; + addr = 0; + + pt1_i2c_emit(pt1, addr, 0, 0, 1, 1, addr /* itself */); + addr = addr + 1; + + if (!pt1->i2c_running) { + pt1_i2c_emit(pt1, addr, 1, 0, 1, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + addr = addr + 2; + pt1->i2c_running = 1; + } + *addrp = addr; +} + +static int pt1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct pt1 *pt1; + int i; + struct i2c_msg *msg, *next_msg; + int addr, ret; + u16 len; + u32 word; + + pt1 = i2c_get_adapdata(adap); + + for (i = 0; i < num; i++) { + msg = &msgs[i]; + if (msg->flags & I2C_M_RD) + return -ENOTSUPP; + + if (i + 1 < num) + next_msg = &msgs[i + 1]; + else + next_msg = NULL; + + if (next_msg && next_msg->flags & I2C_M_RD) { + i++; + + len = next_msg->len; + if (len > 4) + return -ENOTSUPP; + + pt1_i2c_begin(pt1, &addr); + pt1_i2c_write_msg(pt1, addr, &addr, msg); + pt1_i2c_read_msg(pt1, addr, &addr, next_msg); + ret = pt1_i2c_end(pt1, addr); + if (ret < 0) + return ret; + + word = pt1_read_reg(pt1, 2); + while (len--) { + next_msg->buf[len] = word; + word >>= 8; + } + } else { + pt1_i2c_begin(pt1, &addr); + pt1_i2c_write_msg(pt1, addr, &addr, msg); + ret = pt1_i2c_end(pt1, addr); + if (ret < 0) + return ret; + } + } + + return num; +} + +static u32 pt1_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static const struct i2c_algorithm pt1_i2c_algo = { + .master_xfer = pt1_i2c_xfer, + .functionality = pt1_i2c_func, +}; + +static void pt1_i2c_wait(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 128; i++) + pt1_i2c_emit(pt1, 0, 0, 0, 1, 1, 0); +} + +static void pt1_i2c_init(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 1024; i++) + pt1_i2c_emit(pt1, i, 0, 0, 1, 1, 0); +} + +static void __devexit pt1_remove(struct pci_dev *pdev) +{ + struct pt1 *pt1; + void __iomem *regs; + + pt1 = pci_get_drvdata(pdev); + regs = pt1->regs; + + kthread_stop(pt1->kthread); + pt1_cleanup_tables(pt1); + pt1_cleanup_adapters(pt1); + pt1_disable_ram(pt1); + pt1_set_power(pt1, 0, 0, 1); + i2c_del_adapter(&pt1->i2c_adap); + pci_set_drvdata(pdev, NULL); + kfree(pt1); + pci_iounmap(pdev, regs); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static int __devinit +pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret; + void __iomem *regs; + struct pt1 *pt1; + struct i2c_adapter *i2c_adap; + struct task_struct *kthread; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err; + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + regs = pci_iomap(pdev, 0, 0); + if (!regs) { + ret = -EIO; + goto err_pci_release_regions; + } + + pt1 = kzalloc(sizeof(struct pt1), GFP_KERNEL); + if (!pt1) { + ret = -ENOMEM; + goto err_pci_iounmap; + } + + pt1->pdev = pdev; + pt1->regs = regs; + pci_set_drvdata(pdev, pt1); + + i2c_adap = &pt1->i2c_adap; + i2c_adap->class = I2C_CLASS_TV_DIGITAL; + i2c_adap->algo = &pt1_i2c_algo; + i2c_adap->algo_data = NULL; + i2c_adap->dev.parent = &pdev->dev; + i2c_set_adapdata(i2c_adap, pt1); + ret = i2c_add_adapter(i2c_adap); + if (ret < 0) + goto err_kfree; + + pt1_set_power(pt1, 0, 0, 1); + + pt1_i2c_init(pt1); + pt1_i2c_wait(pt1); + + ret = pt1_sync(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + pt1_identify(pt1); + + ret = pt1_unlock(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_reset_pci(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_reset_ram(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_enable_ram(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + pt1_init_streams(pt1); + + pt1_set_power(pt1, 1, 0, 1); + schedule_timeout_uninterruptible((HZ + 49) / 50); + + pt1_set_power(pt1, 1, 0, 0); + schedule_timeout_uninterruptible((HZ + 999) / 1000); + + ret = pt1_init_adapters(pt1); + if (ret < 0) + goto err_pt1_disable_ram; + + ret = pt1_init_tables(pt1); + if (ret < 0) + goto err_pt1_cleanup_adapters; + + kthread = kthread_run(pt1_thread, pt1, "pt1"); + if (IS_ERR(kthread)) { + ret = PTR_ERR(kthread); + goto err_pt1_cleanup_tables; + } + + pt1->kthread = kthread; + return 0; + +err_pt1_cleanup_tables: + pt1_cleanup_tables(pt1); +err_pt1_cleanup_adapters: + pt1_cleanup_adapters(pt1); +err_pt1_disable_ram: + pt1_disable_ram(pt1); + pt1_set_power(pt1, 0, 0, 1); +err_i2c_del_adapter: + i2c_del_adapter(i2c_adap); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(pt1); +err_pci_iounmap: + pci_iounmap(pdev, regs); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err: + return ret; + +} + +static struct pci_device_id pt1_id_table[] = { + { PCI_DEVICE(0x10ee, 0x211a) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, pt1_id_table); + +static struct pci_driver pt1_driver = { + .name = DRIVER_NAME, + .probe = pt1_probe, + .remove = __devexit_p(pt1_remove), + .id_table = pt1_id_table, +}; + + +static int __init pt1_init(void) +{ + return pci_register_driver(&pt1_driver); +} + + +static void __exit pt1_cleanup(void) +{ + pci_unregister_driver(&pt1_driver); +} + +module_init(pt1_init); +module_exit(pt1_cleanup); + +MODULE_AUTHOR("Takahito HIRANO "); +MODULE_DESCRIPTION("Earthsoft PT1 Driver"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/pt1/va1j5jf8007s.c b/linux/drivers/media/dvb/pt1/va1j5jf8007s.c new file mode 100644 index 000000000..2db940f86 --- /dev/null +++ b/linux/drivers/media/dvb/pt1/va1j5jf8007s.c @@ -0,0 +1,658 @@ +/* + * ISDB-S driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "va1j5jf8007s.h" + +enum va1j5jf8007s_tune_state { + VA1J5JF8007S_IDLE, + VA1J5JF8007S_SET_FREQUENCY_1, + VA1J5JF8007S_SET_FREQUENCY_2, + VA1J5JF8007S_SET_FREQUENCY_3, + VA1J5JF8007S_CHECK_FREQUENCY, + VA1J5JF8007S_SET_MODULATION, + VA1J5JF8007S_CHECK_MODULATION, + VA1J5JF8007S_SET_TS_ID, + VA1J5JF8007S_CHECK_TS_ID, + VA1J5JF8007S_TRACK, +}; + +struct va1j5jf8007s_state { + const struct va1j5jf8007s_config *config; + struct i2c_adapter *adap; + struct dvb_frontend fe; + enum va1j5jf8007s_tune_state tune_state; +}; + +static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static int +va1j5jf8007s_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct va1j5jf8007s_state *state; + + state = fe->demodulator_priv; + + switch (state->tune_state) { + case VA1J5JF8007S_IDLE: + case VA1J5JF8007S_SET_FREQUENCY_1: + case VA1J5JF8007S_SET_FREQUENCY_2: + case VA1J5JF8007S_SET_FREQUENCY_3: + case VA1J5JF8007S_CHECK_FREQUENCY: + *status = 0; + return 0; + + + case VA1J5JF8007S_SET_MODULATION: + case VA1J5JF8007S_CHECK_MODULATION: + *status |= FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_SET_TS_ID: + case VA1J5JF8007S_CHECK_TS_ID: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + + case VA1J5JF8007S_TRACK: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +struct va1j5jf8007s_cb_map { + u32 frequency; + u8 cb; +}; + +static const struct va1j5jf8007s_cb_map va1j5jf8007s_cb_maps[] = { + { 986000, 0xb2 }, + { 1072000, 0xd2 }, + { 1154000, 0xe2 }, + { 1291000, 0x20 }, + { 1447000, 0x40 }, + { 1615000, 0x60 }, + { 1791000, 0x80 }, + { 1972000, 0xa0 }, +}; + +static u8 va1j5jf8007s_lookup_cb(u32 frequency) +{ + int i; + const struct va1j5jf8007s_cb_map *map; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_cb_maps); i++) { + map = &va1j5jf8007s_cb_maps[i]; + if (frequency < map->frequency) + return map->cb; + } + return 0xc0; +} + +static int va1j5jf8007s_set_frequency_1(struct va1j5jf8007s_state *state) +{ + u32 frequency; + u16 word; + u8 buf[6]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + word = (frequency + 500) / 1000; + if (frequency < 1072000) + word = (word << 1 & ~0x1f) | (word & 0x0f); + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0x40 | word >> 8; + buf[3] = word; + buf[4] = 0xe0; + buf[5] = va1j5jf8007s_lookup_cb(frequency); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_frequency_2(struct va1j5jf8007s_state *state) +{ + u8 buf[3]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xe4; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_frequency_3(struct va1j5jf8007s_state *state) +{ + u32 frequency; + u8 buf[4]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xf4; + buf[3] = va1j5jf8007s_lookup_cb(frequency) | 0x4; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_frequency(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[2], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xfe; + write_buf[1] = 0xc1; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = read_buf[0] & 0x40; + return 0; +} + +static int va1j5jf8007s_set_modulation(struct va1j5jf8007s_state *state) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x03; + buf[1] = 0x01; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_modulation(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xc3; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = !(read_buf[0] & 0x10); + return 0; +} + +static int +va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state) +{ + u32 ts_id; + u8 buf[3]; + struct i2c_msg msg; + + ts_id = state->fe.dtv_property_cache.isdbs_ts_id; + if (!ts_id) + return 0; + + buf[0] = 0x8f; + buf[1] = ts_id >> 8; + buf[2] = ts_id; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[1], read_buf[2]; + struct i2c_msg msgs[2]; + u32 ts_id; + + ts_id = state->fe.dtv_property_cache.isdbs_ts_id; + if (!ts_id) { + *lock = 1; + return 0; + } + + addr = state->config->demod_address; + + write_buf[0] = 0xe6; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = (read_buf[0] << 8 | read_buf[1]) == ts_id; + return 0; +} + +static int +va1j5jf8007s_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + unsigned int mode_flags, unsigned int *delay, + fe_status_t *status) +{ + struct va1j5jf8007s_state *state; + int ret; + int lock; + + state = fe->demodulator_priv; + + if (params != NULL) + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_1; + + switch (state->tune_state) { + case VA1J5JF8007S_IDLE: + *delay = 3 * HZ; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_1: + ret = va1j5jf8007s_set_frequency_1(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_2; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_2: + ret = va1j5jf8007s_set_frequency_2(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_3; + *delay = (HZ + 99) / 100; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_3: + ret = va1j5jf8007s_set_frequency_3(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_FREQUENCY; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007S_CHECK_FREQUENCY: + ret = va1j5jf8007s_check_frequency(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 999) / 1000; + *status = 0; + return 0; + } + + state->tune_state = VA1J5JF8007S_SET_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_SET_MODULATION: + ret = va1j5jf8007s_set_modulation(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_CHECK_MODULATION: + ret = va1j5jf8007s_check_modulation(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 49) / 50; + *status = FE_HAS_SIGNAL; + return 0; + } + + state->tune_state = VA1J5JF8007S_SET_TS_ID; + *delay = 0; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + + case VA1J5JF8007S_SET_TS_ID: + ret = va1j5jf8007s_set_ts_id(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_TS_ID; + return 0; + + case VA1J5JF8007S_CHECK_TS_ID: + ret = va1j5jf8007s_check_ts_id(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 99) / 100; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + } + + state->tune_state = VA1J5JF8007S_TRACK; + /* fall through */ + + case VA1J5JF8007S_TRACK: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +static int va1j5jf8007s_init_frequency(struct va1j5jf8007s_state *state) +{ + u8 buf[4]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xf0; + buf[3] = 0x04; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_sleep(struct va1j5jf8007s_state *state, int sleep) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x17; + buf[1] = sleep ? 0x01 : 0x00; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_sleep(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007s_init_frequency(state); + if (ret < 0) + return ret; + + return va1j5jf8007s_set_sleep(state, 1); +} + +static int va1j5jf8007s_init(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + + state = fe->demodulator_priv; + state->tune_state = VA1J5JF8007S_IDLE; + + return va1j5jf8007s_set_sleep(state, 0); +} + +static void va1j5jf8007s_release(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops va1j5jf8007s_ops = { + .info = { + .name = "VA1J5JF8007 ISDB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + }, + + .get_frontend_algo = va1j5jf8007s_get_frontend_algo, + .read_status = va1j5jf8007s_read_status, + .tune = va1j5jf8007s_tune, + .sleep = va1j5jf8007s_sleep, + .init = va1j5jf8007s_init, + .release = va1j5jf8007s_release, +}; + +static int va1j5jf8007s_prepare_1(struct va1j5jf8007s_state *state) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0x07; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + if (read_buf[0] != 0x41) + return -EIO; + + return 0; +} + +static const u8 va1j5jf8007s_prepare_bufs[][2] = { + {0x04, 0x02}, {0x0d, 0x55}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01}, + {0x1c, 0x0a}, {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0}, + {0x52, 0x89}, {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69}, + {0x87, 0x04}, {0x8e, 0x02}, {0xa3, 0xf7}, {0xa5, 0xc0}, +}; + +static int va1j5jf8007s_prepare_2(struct va1j5jf8007s_state *state) +{ + u8 addr; + u8 buf[2]; + struct i2c_msg msg; + int i; + + addr = state->config->demod_address; + + msg.addr = addr; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_prepare_bufs); i++) { + memcpy(buf, va1j5jf8007s_prepare_bufs[i], sizeof(buf)); + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + } + + return 0; +} + +/* must be called after va1j5jf8007t_attach */ +int va1j5jf8007s_prepare(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007s_prepare_1(state); + if (ret < 0) + return ret; + + ret = va1j5jf8007s_prepare_2(state); + if (ret < 0) + return ret; + + return va1j5jf8007s_init_frequency(state); +} + +struct dvb_frontend * +va1j5jf8007s_attach(const struct va1j5jf8007s_config *config, + struct i2c_adapter *adap) +{ + struct va1j5jf8007s_state *state; + struct dvb_frontend *fe; + u8 buf[2]; + struct i2c_msg msg; + + state = kzalloc(sizeof(struct va1j5jf8007s_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->adap = adap; + + fe = &state->fe; + memcpy(&fe->ops, &va1j5jf8007s_ops, sizeof(struct dvb_frontend_ops)); + fe->demodulator_priv = state; + + buf[0] = 0x01; + buf[1] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) { + kfree(state); + return NULL; + } + + return fe; +} diff --git a/linux/drivers/media/dvb/pt1/va1j5jf8007s.h b/linux/drivers/media/dvb/pt1/va1j5jf8007s.h new file mode 100644 index 000000000..aa228a816 --- /dev/null +++ b/linux/drivers/media/dvb/pt1/va1j5jf8007s.h @@ -0,0 +1,40 @@ +/* + * ISDB-S driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef VA1J5JF8007S_H +#define VA1J5JF8007S_H + +struct va1j5jf8007s_config { + u8 demod_address; +}; + +struct i2c_adapter; + +struct dvb_frontend * +va1j5jf8007s_attach(const struct va1j5jf8007s_config *config, + struct i2c_adapter *adap); + +/* must be called after va1j5jf8007t_attach */ +int va1j5jf8007s_prepare(struct dvb_frontend *fe); + +#endif diff --git a/linux/drivers/media/dvb/pt1/va1j5jf8007t.c b/linux/drivers/media/dvb/pt1/va1j5jf8007t.c new file mode 100644 index 000000000..71117f4ca --- /dev/null +++ b/linux/drivers/media/dvb/pt1/va1j5jf8007t.c @@ -0,0 +1,468 @@ +/* + * ISDB-T driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "va1j5jf8007t.h" + +enum va1j5jf8007t_tune_state { + VA1J5JF8007T_IDLE, + VA1J5JF8007T_SET_FREQUENCY, + VA1J5JF8007T_CHECK_FREQUENCY, + VA1J5JF8007T_SET_MODULATION, + VA1J5JF8007T_CHECK_MODULATION, + VA1J5JF8007T_TRACK, + VA1J5JF8007T_ABORT, +}; + +struct va1j5jf8007t_state { + const struct va1j5jf8007t_config *config; + struct i2c_adapter *adap; + struct dvb_frontend fe; + enum va1j5jf8007t_tune_state tune_state; +}; + +static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static int +va1j5jf8007t_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct va1j5jf8007t_state *state; + + state = fe->demodulator_priv; + + switch (state->tune_state) { + case VA1J5JF8007T_IDLE: + case VA1J5JF8007T_SET_FREQUENCY: + case VA1J5JF8007T_CHECK_FREQUENCY: + *status = 0; + return 0; + + + case VA1J5JF8007T_SET_MODULATION: + case VA1J5JF8007T_CHECK_MODULATION: + case VA1J5JF8007T_ABORT: + *status |= FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_TRACK: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +struct va1j5jf8007t_cb_map { + u32 frequency; + u8 cb; +}; + +static const struct va1j5jf8007t_cb_map va1j5jf8007t_cb_maps[] = { + { 90000000, 0x80 }, + { 140000000, 0x81 }, + { 170000000, 0xa1 }, + { 220000000, 0x62 }, + { 330000000, 0xa2 }, + { 402000000, 0xe2 }, + { 450000000, 0x64 }, + { 550000000, 0x84 }, + { 600000000, 0xa4 }, + { 700000000, 0xc4 }, +}; + +static u8 va1j5jf8007t_lookup_cb(u32 frequency) +{ + int i; + const struct va1j5jf8007t_cb_map *map; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_cb_maps); i++) { + map = &va1j5jf8007t_cb_maps[i]; + if (frequency < map->frequency) + return map->cb; + } + return 0xe4; +} + +static int va1j5jf8007t_set_frequency(struct va1j5jf8007t_state *state) +{ + u32 frequency; + u16 word; + u8 buf[6]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + word = (frequency + 71428) / 142857 + 399; + buf[0] = 0xfe; + buf[1] = 0xc2; + buf[2] = word >> 8; + buf[3] = word; + buf[4] = 0x80; + buf[5] = va1j5jf8007t_lookup_cb(frequency); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007t_check_frequency(struct va1j5jf8007t_state *state, int *lock) +{ + u8 addr; + u8 write_buf[2], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xfe; + write_buf[1] = 0xc3; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = read_buf[0] & 0x40; + return 0; +} + +static int va1j5jf8007t_set_modulation(struct va1j5jf8007t_state *state) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x01; + buf[1] = 0x40; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_check_modulation(struct va1j5jf8007t_state *state, + int *lock, int *retry) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0x80; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = !(read_buf[0] & 0x10); + *retry = read_buf[0] & 0x80; + return 0; +} + +static int +va1j5jf8007t_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + unsigned int mode_flags, unsigned int *delay, + fe_status_t *status) +{ + struct va1j5jf8007t_state *state; + int ret; + int lock, retry; + + state = fe->demodulator_priv; + + if (params != NULL) + state->tune_state = VA1J5JF8007T_SET_FREQUENCY; + + switch (state->tune_state) { + case VA1J5JF8007T_IDLE: + *delay = 3 * HZ; + *status = 0; + return 0; + + case VA1J5JF8007T_SET_FREQUENCY: + ret = va1j5jf8007t_set_frequency(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007T_CHECK_FREQUENCY; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007T_CHECK_FREQUENCY: + ret = va1j5jf8007t_check_frequency(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 999) / 1000; + *status = 0; + return 0; + } + + state->tune_state = VA1J5JF8007T_SET_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_SET_MODULATION: + ret = va1j5jf8007t_set_modulation(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007T_CHECK_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_CHECK_MODULATION: + ret = va1j5jf8007t_check_modulation(state, &lock, &retry); + if (ret < 0) + return ret; + + if (!lock) { + if (!retry) { + state->tune_state = VA1J5JF8007T_ABORT; + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL; + return 0; + } + *delay = (HZ + 999) / 1000; + *status = FE_HAS_SIGNAL; + return 0; + } + + state->tune_state = VA1J5JF8007T_TRACK; + /* fall through */ + + case VA1J5JF8007T_TRACK: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + + case VA1J5JF8007T_ABORT: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL; + return 0; + } + + BUG(); +} + +static int va1j5jf8007t_init_frequency(struct va1j5jf8007t_state *state) +{ + u8 buf[7]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x8f; + buf[4] = 0xc1; + buf[5] = 0x80; + buf[6] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_set_sleep(struct va1j5jf8007t_state *state, int sleep) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x03; + buf[1] = sleep ? 0x90 : 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_sleep(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007t_init_frequency(state); + if (ret < 0) + return ret; + + return va1j5jf8007t_set_sleep(state, 1); +} + +static int va1j5jf8007t_init(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + + state = fe->demodulator_priv; + state->tune_state = VA1J5JF8007T_IDLE; + + return va1j5jf8007t_set_sleep(state, 0); +} + +static void va1j5jf8007t_release(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops va1j5jf8007t_ops = { + .info = { + .name = "VA1J5JF8007 ISDB-T", + .type = FE_OFDM, + .frequency_min = 90000000, + .frequency_max = 770000000, + .frequency_stepsize = 142857, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + }, + + .get_frontend_algo = va1j5jf8007t_get_frontend_algo, + .read_status = va1j5jf8007t_read_status, + .tune = va1j5jf8007t_tune, + .sleep = va1j5jf8007t_sleep, + .init = va1j5jf8007t_init, + .release = va1j5jf8007t_release, +}; + +static const u8 va1j5jf8007t_prepare_bufs[][2] = { + {0x03, 0x90}, {0x14, 0x8f}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2}, + {0x22, 0x83}, {0x31, 0x0d}, {0x32, 0xe0}, {0x39, 0xd3}, {0x3a, 0x00}, + {0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x02}, {0x76, 0x4e}, {0x77, 0x03}, + {0xef, 0x01} +}; + +int va1j5jf8007t_prepare(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + u8 buf[2]; + struct i2c_msg msg; + int i; + + state = fe->demodulator_priv; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_prepare_bufs); i++) { + memcpy(buf, va1j5jf8007t_prepare_bufs[i], sizeof(buf)); + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + } + + return va1j5jf8007t_init_frequency(state); +} + +struct dvb_frontend * +va1j5jf8007t_attach(const struct va1j5jf8007t_config *config, + struct i2c_adapter *adap) +{ + struct va1j5jf8007t_state *state; + struct dvb_frontend *fe; + u8 buf[2]; + struct i2c_msg msg; + + state = kzalloc(sizeof(struct va1j5jf8007t_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->adap = adap; + + fe = &state->fe; + memcpy(&fe->ops, &va1j5jf8007t_ops, sizeof(struct dvb_frontend_ops)); + fe->demodulator_priv = state; + + buf[0] = 0x01; + buf[1] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) { + kfree(state); + return NULL; + } + + return fe; +} diff --git a/linux/drivers/media/dvb/pt1/va1j5jf8007t.h b/linux/drivers/media/dvb/pt1/va1j5jf8007t.h new file mode 100644 index 000000000..ed49906f7 --- /dev/null +++ b/linux/drivers/media/dvb/pt1/va1j5jf8007t.h @@ -0,0 +1,40 @@ +/* + * ISDB-T driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef VA1J5JF8007T_H +#define VA1J5JF8007T_H + +struct va1j5jf8007t_config { + u8 demod_address; +}; + +struct i2c_adapter; + +struct dvb_frontend * +va1j5jf8007t_attach(const struct va1j5jf8007t_config *config, + struct i2c_adapter *adap); + +/* must be called after va1j5jf8007s_attach */ +int va1j5jf8007t_prepare(struct dvb_frontend *fe); + +#endif -- cgit v1.2.3 From 6d1c517d8eeca4c29f9e39195c16076ac6469f3f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 25 Aug 2009 05:39:51 +0000 Subject: add driver for 774 Friio White USB ISDB-T receiver From: Akihiro Tsukada This patch adds driver for 774 Friio White, ISDB-T USB receiver Friio White is an USB 2.0 ISDB-T receiver. (http://www.friio.com/) The device has a GL861 chip and a Comtech JDVBT90502 canned tuner module. This driver ignores all the frontend_parameters except frequency, as ISDB-T shares the same parameter configuration across the country and thus the device can work like an intelligent one. As this device does not include a CAM nor hardware descrambling feature, the driver passes through scrambled TS streams. There is Friio Black, a variant for ISDB-S, which shares the same USB Vendor/Product ID with White, but it is not supported in this driver. They should be identified in the initialization sequence, but this feature is not tested. Priority: normal Signed-off-by: Akihiro Tsukada Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/dvb/dvb-usb/Kconfig | 6 + linux/drivers/media/dvb/dvb-usb/Makefile | 3 + linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 + linux/drivers/media/dvb/dvb-usb/friio-fe.c | 483 +++++++++++++++++++++++ linux/drivers/media/dvb/dvb-usb/friio.c | 528 ++++++++++++++++++++++++++ linux/drivers/media/dvb/dvb-usb/friio.h | 99 +++++ 6 files changed, 1121 insertions(+) create mode 100644 linux/drivers/media/dvb/dvb-usb/friio-fe.c create mode 100644 linux/drivers/media/dvb/dvb-usb/friio.c create mode 100644 linux/drivers/media/dvb/dvb-usb/friio.h (limited to 'linux') diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index c5ec9a5f3..0e4b97fba 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -316,3 +316,9 @@ config DVB_USB_CE6230 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver + +config DVB_USB_FRIIO + tristate "Friio ISDB-T USB2.0 Receiver support" + depends on DVB_USB + help + Say Y here to support the Japanese DTV receiver Friio. diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile index f92734ed7..85b83a43d 100644 --- a/linux/drivers/media/dvb/dvb-usb/Makefile +++ b/linux/drivers/media/dvb/dvb-usb/Makefile @@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o dvb-usb-ce6230-objs = ce6230.o obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o +dvb-usb-friio-objs = friio.o friio-fe.o +obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2d51e3c28..a548c14c1 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -60,6 +60,7 @@ #define USB_VID_YUAN 0x1164 #define USB_VID_XTENSIONS 0x1ae7 #define USB_VID_HUMAX_COEX 0x10b9 +#define USB_VID_774 0x7a69 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 @@ -274,5 +275,6 @@ #define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001 +#define USB_PID_FRIIO_WHITE 0x0001 #endif diff --git a/linux/drivers/media/dvb/dvb-usb/friio-fe.c b/linux/drivers/media/dvb/dvb-usb/friio-fe.c new file mode 100644 index 000000000..c4dfe25cf --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/friio-fe.c @@ -0,0 +1,483 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include +#include +#include + +#include "friio.h" + +struct jdvbt90502_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + struct jdvbt90502_config config; +}; + +/* NOTE: TC90502 has 16bit register-address? */ +/* register 0x0100 is used for reading PLL status, so reg is u16 here */ +static int jdvbt90502_reg_read(struct jdvbt90502_state *state, + const u16 reg, u8 *buf, const size_t count) +{ + int ret; + u8 wbuf[3]; + struct i2c_msg msg[2]; + + wbuf[0] = reg & 0xFF; + wbuf[1] = 0; + wbuf[2] = reg >> 8; + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = wbuf; + msg[0].len = sizeof(wbuf); + + msg[1].addr = msg[0].addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + deb_fe(" reg read failed.\n"); + return -EREMOTEIO; + } + return 0; +} + +/* currently 16bit register-address is not used, so reg is u8 here */ +static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state, + const u8 reg, const u8 val) +{ + struct i2c_msg msg; + u8 wbuf[2]; + + wbuf[0] = reg; + wbuf[1] = val; + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.buf = wbuf; + msg.len = sizeof(wbuf); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + deb_fe(" reg write failed."); + return -EREMOTEIO; + } + return 0; +} + +static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + int err, i; + for (i = 0; i < len - 1; i++) { + err = jdvbt90502_single_reg_write(state, + buf[0] + i, buf[i + 1]); + if (err) + return err; + } + + return 0; +} + +/* read pll status byte via the demodulator's I2C register */ +/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */ +static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result) +{ + int ret; + + /* +1 for reading */ + u8 pll_addr_byte = (state->config.pll_address << 1) + 1; + + *result = 0; + + ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG, + pll_addr_byte); + if (ret) + goto error; + + ret = jdvbt90502_reg_read(state, 0x0100, result, 1); + if (ret) + goto error; + + deb_fe("PLL read val:%02x\n", *result); + return 0; + +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + + +/* set pll frequency via the demodulator's I2C register */ +static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq) +{ + int ret; + int retry; + u8 res1; + u8 res2[9]; + + u8 pll_freq_cmd[PLL_CMD_LEN]; + u8 pll_agc_cmd[PLL_CMD_LEN]; + struct i2c_msg msg[2]; + u32 f; + + deb_fe("%s: freq=%d, step=%d\n", __func__, freq, + state->frontend.ops.info.frequency_stepsize); + /* freq -> oscilator frequency conversion. */ + /* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */ + /* add 400[1/7 MHZ] = 57.142857MHz. 57MHz for the IF, */ + /* 1/7MHz for center freq shift */ + f = freq / state->frontend.ops.info.frequency_stepsize; + f += 400; + pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */ + pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1; + pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F; + pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF; + pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */ + pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */ + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = pll_freq_cmd; + msg[0].len = sizeof(pll_freq_cmd); + + ret = i2c_transfer(state->i2c, &msg[0], 1); + if (ret != 1) + goto error; + + udelay(50); + + pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG]; + pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE]; + pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1]; + pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2]; + pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */ + pll_agc_cmd[AGC_CTRL_BYTE] = 0x50; + /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */ + + msg[1].addr = msg[0].addr; + msg[1].flags = 0; + msg[1].buf = pll_agc_cmd; + msg[1].len = sizeof(pll_agc_cmd); + + ret = i2c_transfer(state->i2c, &msg[1], 1); + if (ret != 1) + goto error; + + /* I don't know what these cmds are for, */ + /* but the USB log on a windows box contains them */ + ret = jdvbt90502_single_reg_write(state, 0x01, 0x40); + ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00); + if (ret) + goto error; + udelay(100); + + /* wait for the demod to be ready? */ +#define RETRY_COUNT 5 + for (retry = 0; retry < RETRY_COUNT; retry++) { + ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1); + if (ret) + goto error; + /* if (res1 != 0x00) goto error; */ + ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2)); + if (ret) + goto error; + if (res2[0] >= 0xA7) + break; + msleep(100); + } + if (retry >= RETRY_COUNT) { + deb_fe("%s: FE does not get ready after freq setting.\n", + __func__); + return -EREMOTEIO; + } + + return 0; +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + +static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state) +{ + u8 result; + int ret; + + *state = FE_HAS_SIGNAL; + + ret = jdvbt90502_pll_read(fe->demodulator_priv, &result); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + *state = FE_HAS_SIGNAL + | FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC; + + if (result & PLL_STATUS_LOCKED) + *state |= FE_HAS_LOCK; + + return 0; +} + +static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + return 0; +} + +static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + int ret; + u8 rbuf[37]; + + *strength = 0; + + /* status register (incl. signal strength) : 0x89 */ + /* TODO: read just the necessary registers [0x8B..0x8D]? */ + ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089, + rbuf, sizeof(rbuf)); + + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */ + *strength = (rbuf[3] << 8) + rbuf[4]; + if (rbuf[2]) + *strength = 0xffff; + + return 0; +} + +static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + *snr = 0x0101; + return 0; +} + +static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fs) +{ + fs->min_delay_ms = 500; + fs->step_size = 0; + fs->max_drift = 0; + + return 0; +} + +static int jdvbt90502_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + p->inversion = INVERSION_AUTO; + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + p->u.ofdm.code_rate_HP = FEC_AUTO; + p->u.ofdm.code_rate_LP = FEC_AUTO; + p->u.ofdm.constellation = QAM_64; + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; + p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; + p->u.ofdm.hierarchy_information = HIERARCHY_AUTO; + return 0; +} + +static int jdvbt90502_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + /** + * NOTE: ignore all the paramters except frequency. + * others should be fixed to the proper value for ISDB-T, + * but don't check here. + */ + + struct jdvbt90502_state *state = fe->demodulator_priv; + int ret; + + deb_fe("%s: Freq:%d\n", __func__, p->frequency); + + ret = jdvbt90502_pll_set_freq(state, p->frequency); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + return 0; +} + +static int jdvbt90502_sleep(struct dvb_frontend *fe) +{ + deb_fe("%s called.\n", __func__); + return 0; +} + + +/** + * (reg, val) commad list to initialize this module. + * captured on a Windows box. + */ +static u8 init_code[][2] = { + {0x01, 0x40}, + {0x04, 0x38}, + {0x05, 0x40}, + {0x07, 0x40}, + {0x0F, 0x4F}, + {0x11, 0x21}, + {0x12, 0x0B}, + {0x13, 0x2F}, + {0x14, 0x31}, + {0x16, 0x02}, + {0x21, 0xC4}, + {0x22, 0x20}, + {0x2C, 0x79}, + {0x2D, 0x34}, + {0x2F, 0x00}, + {0x30, 0x28}, + {0x31, 0x31}, + {0x32, 0xDF}, + {0x38, 0x01}, + {0x39, 0x78}, + {0x3B, 0x33}, + {0x3C, 0x33}, + {0x48, 0x90}, + {0x51, 0x68}, + {0x5E, 0x38}, + {0x71, 0x00}, + {0x72, 0x08}, + {0x77, 0x00}, + {0xC0, 0x21}, + {0xC1, 0x10}, + {0xE4, 0x1A}, + {0xEA, 0x1F}, + {0x77, 0x00}, + {0x71, 0x00}, + {0x71, 0x00}, + {0x76, 0x0C}, +}; + +const static int init_code_len = sizeof(init_code) / sizeof(u8[2]); + +static int jdvbt90502_init(struct dvb_frontend *fe) +{ + int i = -1; + int ret; + struct i2c_msg msg; + + struct jdvbt90502_state *state = fe->demodulator_priv; + + deb_fe("%s called.\n", __func__); + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.len = 2; + for (i = 0; i < init_code_len; i++) { + msg.buf = init_code[i]; + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + goto error; + } + msleep(100); + + return 0; + +error: + deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret); + return -EREMOTEIO; +} + + +static void jdvbt90502_release(struct dvb_frontend *fe) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops jdvbt90502_ops; + +struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d) +{ + struct jdvbt90502_state *state = NULL; + + deb_info("%s called.\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = &d->i2c_adap; + memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config)); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &jdvbt90502_ops, + sizeof(jdvbt90502_ops)); + state->frontend.demodulator_priv = state; + + if (jdvbt90502_init(&state->frontend) < 0) + goto error; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops jdvbt90502_ops = { + + .info = { + .name = "Comtech JDVBT90502 ISDB-T", + .type = FE_OFDM, + .frequency_min = 473000000, /* UHF 13ch, center */ + .frequency_max = 767142857, /* UHF 62ch, center */ + .frequency_stepsize = JDVBT90502_PLL_CLK / + JDVBT90502_PLL_DIVIDER, + .frequency_tolerance = 0, + + /* NOTE: this driver ignores all parameters but frequency. */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = jdvbt90502_release, + + .init = jdvbt90502_init, + .sleep = jdvbt90502_sleep, + .write = _jdvbt90502_write, + + .set_frontend = jdvbt90502_set_frontend, + .get_frontend = jdvbt90502_get_frontend, + .get_tune_settings = jdvbt90502_get_tune_settings, + + .read_status = jdvbt90502_read_status, + .read_ber = jdvbt90502_read_ber, + .read_signal_strength = jdvbt90502_read_signal_strength, + .read_snr = jdvbt90502_read_snr, + .read_ucblocks = jdvbt90502_read_ucblocks, +}; diff --git a/linux/drivers/media/dvb/dvb-usb/friio.c b/linux/drivers/media/dvb/dvb-usb/friio.c new file mode 100644 index 000000000..7417329e9 --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/friio.c @@ -0,0 +1,528 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "friio.h" + +/* debug */ +int dvb_usb_friio_debug; +module_param_named(debug, dvb_usb_friio_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/** + * Indirect I2C access to the PLL via FE. + * whole I2C protocol data to the PLL is sent via the FE's I2C register. + * This is done by a control msg to the FE with the I2C data accompanied, and + * a specific USB request number is assigned for that purpose. + * + * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE). + * TODO: refoctored, smarter i2c functions. + */ +static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */ + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write only */ + u8 req, type; + + deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n", + wbuf[1], wbuf[0], wlen - 1); + + if (wo && wlen >= 2) { + req = GL861_REQ_I2C_DATA_CTRL_WRITE; + type = GL861_WRITE; + udelay(20); + return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + req, type, value, index, + &wbuf[1], wlen - 1, 2000); + } + + deb_xfer("not supported ctrl-msg, aborting."); + return -EINVAL; +} + +/* normal I2C access (without extra data arguments). + * write to the register wbuf[0] at I2C address addr with the value wbuf[1], + * or read from the register wbuf[0]. + * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3 + */ +static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index; + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 req, type; + unsigned int pipe; + + /* special case for the indirect I2C access to the PLL via FE, */ + if (addr == friio_fe_config.demod_address && + wbuf[0] == JDVBT90502_2ND_I2C_REG) + return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen); + + if (wo) { + req = GL861_REQ_I2C_WRITE; + type = GL861_WRITE; + pipe = usb_sndctrlpipe(d->udev, 0); + } else { /* rw */ + req = GL861_REQ_I2C_READ; + type = GL861_READ; + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + switch (wlen) { + case 1: + index = wbuf[0]; + break; + case 2: + index = wbuf[0]; + value = value + wbuf[1]; + break; + case 3: + /* special case for 16bit register-address */ + index = (wbuf[2] << 8) | wbuf[0]; + value = value + wbuf[1]; + break; + default: + deb_xfer("wlen = %x, aborting.", wlen); + return -EINVAL; + } + msleep(1); + return usb_control_msg(d->udev, pipe, req, type, + value, index, rbuf, rlen, 2000); +} + +/* I2C */ +static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + if (gl861_i2c_msg(d, msg[i].addr, + msg[i].buf, msg[i].len, + msg[i + 1].buf, msg[i + 1].len) < 0) + break; + i++; + } else + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 gl861_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + + +static int friio_ext_ctl(struct dvb_usb_adapter *adap, + u32 sat_color, int lnb_on) +{ + int i; + int ret; + struct i2c_msg msg; + u8 buf[2]; + u32 mask; + u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0; + + msg.addr = 0x00; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + + buf[0] = 0x00; + + /* send 2bit header (&B10) */ + buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE; + ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + buf[1] = lnb | FRIIO_CTL_STROBE; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + /* send 32bit(satur, R, G, B) data in serial */ + mask = 1 << 31; + for (i = 0; i < 32; i++) { + buf[1] = lnb | FRIIO_CTL_STROBE; + if (sat_color & mask) + buf[1] |= FRIIO_CTL_LED; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + mask >>= 1; + } + + /* set the strobe off */ + buf[1] = lnb; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + return (ret == 70); +} + + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); + +/* TODO: move these init cmds to the FE's init routine? */ +static u8 streaming_init_cmds[][2] = { + {0x33, 0x08}, + {0x37, 0x40}, + {0x3A, 0x1F}, + {0x3B, 0xFF}, + {0x3C, 0x1F}, + {0x3D, 0xFF}, + {0x38, 0x00}, + {0x35, 0x00}, + {0x39, 0x00}, + {0x36, 0x00}, +}; +static int cmdlen = sizeof(streaming_init_cmds) / 2; + +/* + * Command sequence in this init function is a replay + * of the captured USB commands from the Windows proprietary driver. + */ +static int friio_initialize(struct dvb_usb_device *d) +{ + int ret; + int i; + int retry = 0; + u8 rbuf[2]; + u8 wbuf[3]; + + deb_info("%s called.\n", __func__); + + /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */ + /* because the i2c device is not set up yet. */ + wbuf[0] = 0x11; + wbuf[1] = 0x02; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(2); + + wbuf[0] = 0x11; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(1); + + /* following msgs should be in the FE's init code? */ + /* cmd sequence to identify the device type? (friio black/white) */ + wbuf[0] = 0x03; + wbuf[1] = 0x80; + /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */ + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x1200, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(2); + wbuf[0] = 0x03; + wbuf[1] = 0x80; + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x9000, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff again. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(1); + +restart: + /* ============ start DEMOD init cmds ================== */ + /* read PLL status to clear the POR bit */ + wbuf[0] = JDVBT90502_2ND_I2C_REG; + wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(5); + /* note: DEMODULATOR has 16bit register-address. */ + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg addr: 0x0100 */ + wbuf[1] = 0x00; /* val: not used */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1); + if (ret < 0) + goto error; +/* + msleep(1); + wbuf[0] = 0x80; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1); + if (ret < 0) + goto error; + */ + if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ + if (++retry > 3) { + deb_info("failed to get the correct" + " FE demod status:0x%02x\n", rbuf[0]); + goto error; + } + msleep(100); + goto restart; + } + + /* TODO: check return value in rbuf */ + /* =========== end DEMOD init cmds ===================== */ + msleep(1); + + wbuf[0] = 0x30; + wbuf[1] = 0x04; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(2); + /* following 2 cmds unnecessary? */ + wbuf[0] = 0x00; + wbuf[1] = 0x01; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + wbuf[0] = 0x06; + wbuf[1] = 0x0F; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + /* some streaming ctl cmds (maybe) */ + msleep(10); + for (i = 0; i < cmdlen; i++) { + ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2, + NULL, 0); + if (ret < 0) + goto error; + msleep(1); + } + msleep(20); + + /* change the LED color etc. */ + ret = friio_streaming_ctrl(&d->adapter[0], 0); + if (ret < 0) + goto error; + + return 0; + +error: + deb_info("%s:ret == %d\n", __func__, ret); + return -EIO; +} + +/* Callbacks for DVB USB */ + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + + deb_info("%s called.(%d)\n", __func__, onoff); + + /* set the LED color and saturation (and LNB on) */ + if (onoff) + ret = friio_ext_ctl(adap, 0x6400ff64, 1); + else + ret = friio_ext_ctl(adap, 0x96ff00ff, 1); + + if (ret != 1) { + deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret); + return -EREMOTEIO; + } + return 0; +} + +static int friio_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (friio_initialize(adap->dev) < 0) + return -EIO; + + adap->fe = jdvbt90502_attach(adap->dev); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties friio_properties; + +static int friio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + if (intf->num_altsetting < GL861_ALTSETTING_COUNT) + return -ENODEV; + + alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING); + if (alt == NULL) { + deb_rc("not alt found!\n"); + return -ENODEV; + } + ret = usb_set_interface(interface_to_usbdev(intf), + alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret != 0) { + deb_rc("failed to set alt-setting!\n"); + return ret; + } + + ret = dvb_usb_device_init(intf, &friio_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) + friio_streaming_ctrl(&d->adapter[0], 1); + + return ret; +} + + +struct jdvbt90502_config friio_fe_config = { + .demod_address = FRIIO_DEMOD_ADDR, + .pll_address = FRIIO_PLL_ADDR, +}; + +static struct i2c_algorithm gl861_i2c_algo = { + .master_xfer = gl861_i2c_xfer, + .functionality = gl861_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif +}; + +static struct usb_device_id friio_table[] = { + { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, friio_table); + + +static struct dvb_usb_device_properties friio_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = { + /* caps:0 => no pid filter, 188B TS packet */ + /* GL861 has a HW pid filter, but no info available. */ + { + .caps = 0, + + .frontend_attach = friio_frontend_attach, + .streaming_ctrl = friio_streaming_ctrl, + + .stream = { + .type = USB_BULK, + /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */ + .count = 8, + .endpoint = 0x01, + .u = { + /* GL861 has 6KB buf inside */ + .bulk = { + .buffersize = 16384, + } + } + }, + } + }, + .i2c_algo = &gl861_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "774 Friio ISDB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &friio_table[0], NULL }, + }, + } +}; + +static struct usb_driver friio_driver = { + .name = "dvb_usb_friio", + .probe = friio_probe, + .disconnect = dvb_usb_device_exit, + .id_table = friio_table, +}; + + +/* module stuff */ +static int __init friio_module_init(void) +{ + int ret; + + ret = usb_register(&friio_driver); + if (ret) + err("usb_register failed. Error number %d", ret); + + return ret; +} + + +static void __exit friio_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&friio_driver); +} + +module_init(friio_module_init); +module_exit(friio_module_exit); + +MODULE_AUTHOR("Akihiro Tsukada "); +MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver"); +MODULE_VERSION("0.2"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/friio.h b/linux/drivers/media/dvb/dvb-usb/friio.h new file mode 100644 index 000000000..af8d55e39 --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/friio.h @@ -0,0 +1,99 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_FRIIO_H_ +#define _DVB_USB_FRIIO_H_ + +/** + * Friio Components + * USB hub: AU4254 + * USB controller(+ TS dmx & streaming): GL861 + * Frontend: comtech JDVBT-90502 + * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) + * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) + * LED x3 (+LNB) controll: PIC 16F676 + * EEPROM: 24C08 + * + * (USB smart card reader: AU9522) + * + */ + +#define DVB_USB_LOG_PREFIX "friio" +#include "dvb-usb.h" + +extern int dvb_usb_friio_debug; +#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args) + +/* Vendor requests */ +#define GL861_WRITE 0x40 +#define GL861_READ 0xc0 + +/* command bytes */ +#define GL861_REQ_I2C_WRITE 0x01 +#define GL861_REQ_I2C_READ 0x02 +/* For control msg with data argument */ +/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */ +#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03 + +#define GL861_ALTSETTING_COUNT 2 +#define FRIIO_BULK_ALTSETTING 0 +#define FRIIO_ISOC_ALTSETTING 1 + +/* LED & LNB control via PIC. */ +/* basically, it's serial control with clock and strobe. */ +/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */ +/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/ +#define FRIIO_CTL_LNB (1 << 0) +#define FRIIO_CTL_STROBE (1 << 1) +#define FRIIO_CTL_CLK (1 << 2) +#define FRIIO_CTL_LED (1 << 3) + +/* Front End related */ + +#define FRIIO_DEMOD_ADDR (0x30 >> 1) +#define FRIIO_PLL_ADDR (0xC0 >> 1) + +#define JDVBT90502_PLL_CLK 4000000 +#define JDVBT90502_PLL_DIVIDER 28 + +#define JDVBT90502_2ND_I2C_REG 0xFE + +/* byte index for pll i2c command data structure*/ +/* see datasheet for tua6034 */ +#define DEMOD_REDIRECT_REG 0 +#define ADDRESS_BYTE 1 +#define DIVIDER_BYTE1 2 +#define DIVIDER_BYTE2 3 +#define CONTROL_BYTE 4 +#define BANDSWITCH_BYTE 5 +#define AGC_CTRL_BYTE 5 +#define PLL_CMD_LEN 6 + +/* bit masks for PLL STATUS response */ +#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */ +#define PLL_STATUS_LOCKED 0x40 /* 1: locked */ +#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */ +#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */ + /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */ + + +struct jdvbt90502_config { + u8 demod_address; /* i2c addr for demodulator IC */ + u8 pll_address; /* PLL addr on the secondary i2c*/ +}; +extern struct jdvbt90502_config friio_fe_config; + +extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d); +#endif -- cgit v1.2.3 From 1f892d3f2cb393d396625ea1f65228e9531fe957 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 Sep 2009 23:36:05 +0000 Subject: Key filter for BeholdTV cards. From: Dmitri Belimov Hi All. When fast push-pull button of remote control we can received incorrect key code 0x00. Key information from IR decoder has ID of remote control 2 bytes, byte of key code and byte of mirror key code. Correct data 0x86 0x6B 0x00 0xFF Wrong data 0x86 0x6B 0x00 0x00 This patch added additional test of mirror byte for filtering. With my best regards, Dmitry. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/saa7134/saa7134-input.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'linux') diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index 153fb3c5b..5bd1f3b8b 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -288,6 +288,10 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir) return 0; + /* Wrong data decode fix */ + if (data[9] != (unsigned char)(~data[8])) + return 0; + *ir_key = data[9]; *ir_raw = data[9]; -- cgit v1.2.3 From 7993da1d35df8298ca93d04dd202bca8224367af Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Sep 2009 20:44:37 -0300 Subject: Adds support for Zolid Hybrid PCI card: From: Henk Vergonet http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner test status analog (PAL-B): - Sometimes picture is noisy, but it becomes crystal clear after switching between channels. (happens for example at 687.25 Mhz) - On a lower frequency (511.25 Mhz) the picture is always sharp, but lacks colour. - No sound problems. - radio untested. Digital: - DVB-T/H stream reception works. - Would expect to see some more channels in the higher frequency region. Overall is the impression that sensitivity still needs improvement both in analog and digital modes. Signed-off-by: Henk Vergonet Signed-off-by: Mauro Carvalho Chehab --- linux/Documentation/video4linux/CARDLIST.saa7134 | 1 + linux/drivers/media/video/saa7134/saa7134-cards.c | 27 +++++++++++++++++++++ linux/drivers/media/video/saa7134/saa7134-dvb.c | 29 +++++++++++++++++++++++ linux/drivers/media/video/saa7134/saa7134.h | 1 + 4 files changed, 58 insertions(+) (limited to 'linux') diff --git a/linux/Documentation/video4linux/CARDLIST.saa7134 b/linux/Documentation/video4linux/CARDLIST.saa7134 index 0ac4d2544..2620d6034 100644 --- a/linux/Documentation/video4linux/CARDLIST.saa7134 +++ b/linux/Documentation/video4linux/CARDLIST.saa7134 @@ -171,3 +171,4 @@ 170 -> AverMedia AverTV Studio 505 [1461:a115] 171 -> Beholder BeholdTV X7 [5ace:7595] 172 -> RoverMedia TV Link Pro FM [19d1:0138] +173 -> Zolid Hybrid TV Tuner PCI [1131:2004] diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c index 6ea54fa7c..b37383a6c 100644 --- a/linux/drivers/media/video/saa7134/saa7134-cards.c +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c @@ -5296,6 +5296,27 @@ struct saa7134_board saa7134_boards[] = { .amux = TV, }, }, + [SAA7134_BOARD_ZOLID_HYBRID_PCI] = { + .name = "Zolid Hybrid TV Tuner PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 0, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + } }, + .radio = { /* untested */ + .name = name_radio, + .amux = TV, + }, + }, }; @@ -6428,6 +6449,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x19d1, /* RoverMedia */ .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */ .driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2004, + .driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI, }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, diff --git a/linux/drivers/media/video/saa7134/saa7134-dvb.c b/linux/drivers/media/video/saa7134/saa7134-dvb.c index dc2428f12..d52b7455c 100644 --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c @@ -1014,6 +1014,22 @@ static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; +static struct tda10048_config zolid_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + +static struct tda18271_config zolid_tda18271_config = { + .gate = TDA18271_GATE_ANALOG, +}; + /* ================================================================== * Core code */ @@ -1492,6 +1508,19 @@ static int dvb_init(struct saa7134_dev *dev) wprintk("%s: No zl10039 found!\n", __func__); + break; + case SAA7134_BOARD_ZOLID_HYBRID_PCI: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &zolid_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &zolid_tda18271_config); + } break; default: wprintk("Huh? unknown DVB card?\n"); diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h index 1bf2837b4..ff65f13fd 100644 --- a/linux/drivers/media/video/saa7134/saa7134.h +++ b/linux/drivers/media/video/saa7134/saa7134.h @@ -297,6 +297,7 @@ struct saa7134_format { #define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170 #define SAA7134_BOARD_BEHOLD_X7 171 #define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172 +#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3 From c3f603f1ba42f82cfb30e06f08d35cf672e90147 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 14 Sep 2009 22:13:29 +0000 Subject: Correct dangerous and inefficient msecs_to_jiffies() calculation in some V4L2 drivers From: Andreas Mohr Signed-off-by: Andreas Mohr Signed-off-by: Mauro Carvalho Chehab --- linux/drivers/media/video/et61x251/et61x251_core.c | 6 ++++-- linux/drivers/media/video/sn9c102/sn9c102_core.c | 6 ++++-- linux/drivers/media/video/zc0301/zc0301_core.c | 6 ++++-- 3 files changed, 12 insertions(+), 6 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/et61x251/et61x251_core.c b/linux/drivers/media/video/et61x251/et61x251_core.c index bf88a1387..fca273107 100644 --- a/linux/drivers/media/video/et61x251/et61x251_core.c +++ b/linux/drivers/media/video/et61x251/et61x251_core.c @@ -1383,8 +1383,10 @@ et61x251_read(struct file* filp, char __user * buf, (!list_empty(&cam->outqueue)) || (cam->state & DEV_DISCONNECTED) || (cam->state & DEV_MISCONFIGURED), - cam->module_param.frame_timeout * - 1000 * msecs_to_jiffies(1) ); + msecs_to_jiffies( + cam->module_param.frame_timeout * 1000 + ) + ); if (timeout < 0) { mutex_unlock(&cam->fileop_mutex); return timeout; diff --git a/linux/drivers/media/video/sn9c102/sn9c102_core.c b/linux/drivers/media/video/sn9c102/sn9c102_core.c index 63432ccd2..69df0cb75 100644 --- a/linux/drivers/media/video/sn9c102/sn9c102_core.c +++ b/linux/drivers/media/video/sn9c102/sn9c102_core.c @@ -1958,8 +1958,10 @@ sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) (!list_empty(&cam->outqueue)) || (cam->state & DEV_DISCONNECTED) || (cam->state & DEV_MISCONFIGURED), - cam->module_param.frame_timeout * - 1000 * msecs_to_jiffies(1) ); + msecs_to_jiffies( + cam->module_param.frame_timeout * 1000 + ) + ); if (timeout < 0) { mutex_unlock(&cam->fileop_mutex); return timeout; diff --git a/linux/drivers/media/video/zc0301/zc0301_core.c b/linux/drivers/media/video/zc0301/zc0301_core.c index b6a3ac815..996cf0c41 100644 --- a/linux/drivers/media/video/zc0301/zc0301_core.c +++ b/linux/drivers/media/video/zc0301/zc0301_core.c @@ -823,8 +823,10 @@ zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) (!list_empty(&cam->outqueue)) || (cam->state & DEV_DISCONNECTED) || (cam->state & DEV_MISCONFIGURED), - cam->module_param.frame_timeout * - 1000 * msecs_to_jiffies(1) ); + msecs_to_jiffies( + cam->module_param.frame_timeout * 1000 + ) + ); if (timeout < 0) { mutex_unlock(&cam->fileop_mutex); return timeout; -- cgit v1.2.3