From 99af65d5e0e8d81cebde342515a18d7bd641fc05 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:21:34 -0700
Subject: dvb-pll: Add Samsung TDTC9251DH0 DVB-T NIM

From: Trent Piepho <xyzzy@speakeasy.org>

No datasheet, tuner data comes from code in flexcop driver.  This tuner is
also used on the AVerTV 771 supported by the bttv driver, but that code
uses a different tuner configuration, which is surprising.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/frontends/dvb-pll.c | 15 +++++++++++++++
 linux/drivers/media/dvb/frontends/dvb-pll.h |  1 +
 2 files changed, 16 insertions(+)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c
index 8ef5d1eff..6c6506757 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.c
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.c
@@ -390,6 +390,20 @@ static struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = {
 	}
 };
 
+/* Samsung TDTC9251DH0 DVB-T NIM, as used on AirStar 2 */
+static struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = {
+	.name	= "Samsung TDTC9251DH0",
+	.min	=  48000000,
+	.max	= 863000000,
+	.iffreq	=  36166667,
+	.count	= 3,
+	.entries = {
+		{ 157500000, 166667, 0xcc, 0x09 },
+		{ 443000000, 166667, 0xcc, 0x0a },
+		{ 863000000, 166667, 0xcc, 0x08 },
+	}
+};
+
 /* ----------------------------------------------------------- */
 
 static struct dvb_pll_desc *pll_list[] = {
@@ -408,6 +422,7 @@ static struct dvb_pll_desc *pll_list[] = {
 	[DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261,
 	[DVB_PLL_OPERA1]                 = &dvb_pll_opera1,
 	[DVB_PLL_SAMSUNG_DTOS403IH102A]  = &dvb_pll_samsung_dtos403ih102a,
+	[DVB_PLL_SAMSUNG_TDTC9251DH0]    = &dvb_pll_samsung_tdtc9251dh0,
 };
 
 /* ----------------------------------------------------------- */
diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h
index 05239f579..dcbb28333 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.h
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.h
@@ -23,6 +23,7 @@
 #define DVB_PLL_PHILIPS_SD1878_TDA8261 12
 #define DVB_PLL_OPERA1                 13
 #define DVB_PLL_SAMSUNG_DTOS403IH102A  14
+#define DVB_PLL_SAMSUNG_TDTC9251DH0    15
 
 /**
  * Attach a dvb-pll to the supplied frontend structure.
-- 
cgit v1.2.3


From 74c4537b6d3fadad69ae9955994e26ce67bdb454 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:21:34 -0700
Subject: dvb-pll: Add support for Samsung TBDU18132 DVB-S NIM

From: Trent Piepho <xyzzy@speakeasy.org>

Tuner parameters taken from flexcop driver.  This PLL has a 17 bit divisor
while the dvb-pll driver is designed for 15 bit divisors.  It's not a
problem as 15 bits is enough for the tuner's entire range.  But if a larger
range was wanted, it could be done by adding additional bands with the
extra divisor bits appearing as band switch bits.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/frontends/dvb-pll.c | 22 ++++++++++++++++++++++
 linux/drivers/media/dvb/frontends/dvb-pll.h |  1 +
 2 files changed, 23 insertions(+)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c
index 6c6506757..7abd33389 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.c
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.c
@@ -404,6 +404,27 @@ static struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = {
 	}
 };
 
+/* Samsung TBDU18132 DVB-S NIM with TSA5059 PLL, used in SkyStar2 DVB-S 2.3 */
+static struct dvb_pll_desc dvb_pll_samsung_tbdu18132 = {
+	.name = "Samsung TBDU18132",
+	.min	=  950000,
+	.max	= 2150000, /* guesses */
+	.iffreq = 0,
+	.count = 2,
+	.entries = {
+		{ 1550000, 125, 0x84, 0x82 },
+		{ 4095937, 125, 0x84, 0x80 },
+	}
+	/* TSA5059 PLL has a 17 bit divisor rather than the 15 bits supported
+	 * by this driver.  The two extra bits are 0x60 in the third byte.  15
+	 * bits is enough for over 4 GHz, which is enough to cover the range
+	 * of this tuner.  We could use the additional divisor bits by adding
+	 * more entries, e.g.
+	 { 0x0ffff * 125 + 125/2, 125, 0x84 | 0x20, },
+	 { 0x17fff * 125 + 125/2, 125, 0x84 | 0x40, },
+	 { 0x1ffff * 125 + 125/2, 125, 0x84 | 0x60, }, */
+};
+
 /* ----------------------------------------------------------- */
 
 static struct dvb_pll_desc *pll_list[] = {
@@ -423,6 +444,7 @@ static struct dvb_pll_desc *pll_list[] = {
 	[DVB_PLL_OPERA1]                 = &dvb_pll_opera1,
 	[DVB_PLL_SAMSUNG_DTOS403IH102A]  = &dvb_pll_samsung_dtos403ih102a,
 	[DVB_PLL_SAMSUNG_TDTC9251DH0]    = &dvb_pll_samsung_tdtc9251dh0,
+	[DVB_PLL_SAMSUNG_TBDU18132]	 = &dvb_pll_samsung_tbdu18132,
 };
 
 /* ----------------------------------------------------------- */
diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h
index dcbb28333..7905f3440 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.h
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.h
@@ -24,6 +24,7 @@
 #define DVB_PLL_OPERA1                 13
 #define DVB_PLL_SAMSUNG_DTOS403IH102A  14
 #define DVB_PLL_SAMSUNG_TDTC9251DH0    15
+#define DVB_PLL_SAMSUNG_TBDU18132      16
 
 /**
  * Attach a dvb-pll to the supplied frontend structure.
-- 
cgit v1.2.3


From 70cded874faac45e4b8c55850cfaccc4112ffc10 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:21:34 -0700
Subject: dvb-pll: Add support for Samsung TBMU24112 DVB-S NIM

From: Trent Piepho <xyzzy@speakeasy.org>

Tuner parameters determined from code in flexcop driver.  That code rounded
the divisor down instead of to the nearest value.  This was probably not
intentional and the dvb-pll version will round to nearest.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/frontends/dvb-pll.c | 14 ++++++++++++++
 linux/drivers/media/dvb/frontends/dvb-pll.h |  1 +
 2 files changed, 15 insertions(+)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c
index 7abd33389..5dd999b8b 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.c
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.c
@@ -425,6 +425,19 @@ static struct dvb_pll_desc dvb_pll_samsung_tbdu18132 = {
 	 { 0x1ffff * 125 + 125/2, 125, 0x84 | 0x60, }, */
 };
 
+/* Samsung TBMU24112 DVB-S NIM with SL1935 zero-IF tuner */
+static struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = {
+	.name = "Samsung TBMU24112",
+	.min	=  950000,
+	.max	= 2150000, /* guesses */
+	.iffreq = 0,
+	.count = 2,
+	.entries = {
+		{ 1500000, 125, 0x84, 0x18 },
+		{ 9999999, 125, 0x84, 0x08 },
+	}
+};
+
 /* ----------------------------------------------------------- */
 
 static struct dvb_pll_desc *pll_list[] = {
@@ -445,6 +458,7 @@ static struct dvb_pll_desc *pll_list[] = {
 	[DVB_PLL_SAMSUNG_DTOS403IH102A]  = &dvb_pll_samsung_dtos403ih102a,
 	[DVB_PLL_SAMSUNG_TDTC9251DH0]    = &dvb_pll_samsung_tdtc9251dh0,
 	[DVB_PLL_SAMSUNG_TBDU18132]	 = &dvb_pll_samsung_tbdu18132,
+	[DVB_PLL_SAMSUNG_TBMU24112]      = &dvb_pll_samsung_tbmu24112,
 };
 
 /* ----------------------------------------------------------- */
diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h
index 7905f3440..c1035812c 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.h
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.h
@@ -25,6 +25,7 @@
 #define DVB_PLL_SAMSUNG_DTOS403IH102A  14
 #define DVB_PLL_SAMSUNG_TDTC9251DH0    15
 #define DVB_PLL_SAMSUNG_TBDU18132      16
+#define DVB_PLL_SAMSUNG_TBMU24112      17
 
 /**
  * Attach a dvb-pll to the supplied frontend structure.
-- 
cgit v1.2.3


From ed6182953e804ff70ba2fc087dfe131498f00278 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:24:00 -0700
Subject: dvb-pll: Add support for Alps TDEE4 DVB-C NIM

From: Trent Piepho <xyzzy@speakeasy.org>

No datasheet, data take from code in flexcop driver.  That code rounded
down the divisor rather than rounding to nearest, which was probably not
intentional and the dvb-pll code will round to nearest.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/frontends/dvb-pll.c | 24 ++++++++++++++++++++++++
 linux/drivers/media/dvb/frontends/dvb-pll.h |  1 +
 2 files changed, 25 insertions(+)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c
index 5dd999b8b..d8a7947e0 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.c
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.c
@@ -438,6 +438,29 @@ static struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = {
 	}
 };
 
+/* Alps TDEE4 DVB-C NIM, used on Cablestar 2 */
+/* byte 4 : 1  *   *   AGD R3  R2  R1  R0
+ * byte 5 : C1 *   RE  RTS BS4 BS3 BS2 BS1
+ * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95
+ * Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
+ *  47 - 153   0  *  0   0   0   0   0   1   0x01
+ * 153 - 430   0  *  0   0   0   0   1   0   0x02
+ * 430 - 822   0  *  0   0   1   0   0   0   0x08
+ * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
+static struct dvb_pll_desc dvb_pll_alps_tdee4 = {
+	.name = "ALPS TDEE4",
+	.min	=  47000000,
+	.max	= 862000000,
+	.iffreq	=  36125000,
+	.count = 4,
+	.entries = {
+		{ 153000000, 62500, 0x95, 0x01 },
+		{ 430000000, 62500, 0x95, 0x02 },
+		{ 822000000, 62500, 0x95, 0x08 },
+		{ 999999999, 62500, 0x95, 0x88 },
+	}
+};
+
 /* ----------------------------------------------------------- */
 
 static struct dvb_pll_desc *pll_list[] = {
@@ -451,6 +474,7 @@ static struct dvb_pll_desc *pll_list[] = {
 	[DVB_PLL_TUA6034]                = &dvb_pll_tua6034,
 	[DVB_PLL_TDA665X]                = &dvb_pll_tda665x,
 	[DVB_PLL_TDED4]                  = &dvb_pll_tded4,
+	[DVB_PLL_TDEE4]                  = &dvb_pll_alps_tdee4,
 	[DVB_PLL_TDHU2]                  = &dvb_pll_tdhu2,
 	[DVB_PLL_SAMSUNG_TBMV]           = &dvb_pll_samsung_tbmv,
 	[DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261,
diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h
index c1035812c..086964344 100644
--- a/linux/drivers/media/dvb/frontends/dvb-pll.h
+++ b/linux/drivers/media/dvb/frontends/dvb-pll.h
@@ -26,6 +26,7 @@
 #define DVB_PLL_SAMSUNG_TDTC9251DH0    15
 #define DVB_PLL_SAMSUNG_TBDU18132      16
 #define DVB_PLL_SAMSUNG_TBMU24112      17
+#define DVB_PLL_TDEE4		       18
 
 /**
  * Attach a dvb-pll to the supplied frontend structure.
-- 
cgit v1.2.3


From 8b87b848ca8a5e6465888220e57ec3e59104d677 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:31:22 -0700
Subject: b2c2: fix frontends compiled into kernel

From: Trent Piepho <xyzzy@speakeasy.org>

A recent patch didn't take into account that frontends can be compiled into
the kernel.  Or that frontends compiled as modules can't be used by the
b2c2 driver if it is not a module itself.

Some frontends require multiple drivers, e.g. a demod driver and a tuner
driver.  The code for the frontend support was getting added if the demod
driver was available.  Change this to also require any needed tuner or SEC
drivers as well.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 67 ++++++++++++++-----------
 1 file changed, 37 insertions(+), 30 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index efb4a6c2b..9a6307a34 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -20,8 +20,14 @@
 #include "tuner-simple.h"
 #include "stv0297.h"
 
+
+/* Can we use the specified front-end?  Remember that if we are compiled
+ * into the kernel we can't call code that's in modules.  */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+	(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
 /* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 }
 #endif
 
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
-	|| defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	u32 srate, u32 ratio)
 {
@@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev26_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
@@ -385,10 +394,12 @@ fail:
 	fc->fc_i2c_adap[0].no_base_addr = 0;
 	return 0;
 }
+#else
+#define skystar2_rev27_attach NULL
 #endif
 
 /* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
 	.demod_address = 0x55,
 	.dont_use_pll = 1,
@@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
 	return 1;
 }
+#else
+#define skystar2_rev28_attach NULL
 #endif
 
 /* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
 	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define airstar_dvbt_attach NULL
 #endif
 
 /* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
 static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
 	const struct firmware **fw, char* name)
 {
@@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc,
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
 	return fc->fe != NULL;
 }
+#else
+#define airstar_atsc1_attach NULL
 #endif
 
 /* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
 static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
@@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc,
 	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
 			    DVB_PLL_SAMSUNG_TBMV);
 }
+#else
+#define airstar_atsc2_attach NULL
 #endif
 
 /* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.demod_address       = 0x59,
 	.demod_chip          = LGDT3303,
@@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
 	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
 			    TUNER_LG_TDVS_H06XF);
 }
+#else
+#define airstar_atsc3_attach NULL
 #endif
 
 /* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
 		struct dvb_frontend_parameters *fep)
 {
@@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc,
 	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 	return 1;
 }
+#else
+#define cablestar2_attach NULL
 #endif
 
 static struct {
 	flexcop_device_type_t type;
 	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
 	{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
 	{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
 	{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
 	{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
 	{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
 	{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
 	{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
 	{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
 };
 
 /* try to figure out the frontend */
@@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 {
 	int i;
 	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		if (!flexcop_frontends[i].attach)
+			continue;
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;
-- 
cgit v1.2.3


From 8ec3691caa62885c1f9f47b05f580ac47b5db528 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:31:22 -0700
Subject: b2c2: Use dvb-pll for AirStar DVB-T's tuner

From: Trent Piepho <xyzzy@speakeasy.org>

The code in samsung_tdtc9251dh0_calc_regs() is equivalent to what dvb-pll's
code does.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 38 ++++---------------------
 1 file changed, 6 insertions(+), 32 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 9a6307a34..0669a14da 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -449,7 +449,7 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
 #endif
 
 /* AirStar DVB-T */
-#if FE_SUPPORTED(MT352)
+#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
 	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -467,32 +467,6 @@ static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 	return 0;
 }
 
-static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
-{
-	u32 div;
-	unsigned char bs = 0;
-
-	if (buf_len < 5)
-		return -EINVAL;
-
-#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
-	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-	if (params->frequency >= 48000000 && params->frequency <= 154000000) \
-		bs = 0x09;
-	if (params->frequency >= 161000000 && params->frequency <= 439000000) \
-		bs = 0x0a;
-	if (params->frequency >= 447000000 && params->frequency <= 863000000) \
-		bs = 0x08;
-
-	pllbuf[0] = 0x61;
-	pllbuf[1] = div >> 8;
-	pllbuf[2] = div & 0xff;
-	pllbuf[3] = 0xcc;
-	pllbuf[4] = bs;
-	return 5;
-}
-
 static struct mt352_config samsung_tdtc9251dh0_config = {
 	.demod_address = 0x0f,
 	.demod_init    = samsung_tdtc9251dh0_demod_init,
@@ -502,11 +476,11 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL) {
-		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
-		return 1;
-	}
-	return 0;
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+			    DVB_PLL_SAMSUNG_TDTC9251DH0);
 }
 #else
 #define airstar_dvbt_attach NULL
-- 
cgit v1.2.3


From a33131bc8be60a05f9abfa4bc0ce81b30a2af7e8 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:31:22 -0700
Subject: b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6

From: Trent Piepho <xyzzy@speakeasy.org>

The code in skystar23_samsung_tbdu18132_tuner_set_params() and
samsung_tbmu24112_tuner_set_params() is equivalent to what the dvb-pll code
does.  There could be an issue because the dvb-pll code will probe to check
for the tuner, while the previous code didn't do any checks.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 105 +++++++-----------------
 1 file changed, 31 insertions(+), 74 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 0669a14da..928bc4d4d 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -66,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if FE_SUPPORTED(MT312)
+#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -155,55 +155,34 @@ static struct mt312_config skystar23_samsung_tbdu18132_config = {
 	.demod_address = 0x0e,
 };
 
-static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
-	.len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-	div = (params->frequency + (125/2)) / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-	buf[2] = 0x84 | ((div >> 10) & 0x60);
-	buf[3] = 0x80;
-
-	if (params->frequency < 1550000)
-		buf[3] |= 0x02;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
 static int skystar2_rev23_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
+	struct dvb_frontend_ops *ops;
+
 	fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
-	if (fc->fe != NULL) {
-		struct dvb_frontend_ops *ops = &fc->fe->ops;
-		ops->tuner_ops.set_params   =
-			skystar23_samsung_tbdu18132_tuner_set_params;
-		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-		ops->set_tone               = flexcop_set_tone;
-		ops->set_voltage            = flexcop_set_voltage;
-		fc->fe_sleep                = ops->sleep;
-		ops->sleep                  = flexcop_sleep;
-		return 1;
-	}
-	return 0;
+	if (!fc->fe)
+		return 0;
+
+	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+			DVB_PLL_SAMSUNG_TBDU18132))
+		return 0;
+
+	ops = &fc->fe->ops;
+	ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+	ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+	ops->set_tone               = flexcop_set_tone;
+	ops->set_voltage            = flexcop_set_voltage;
+	fc->fe_sleep                = ops->sleep;
+	ops->sleep                  = flexcop_sleep;
+	return 1;
 }
 #else
 #define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if FE_SUPPORTED(STV0299)
+#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	u32 srate, u32 ratio)
 {
@@ -232,31 +211,6 @@ static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	return 0;
 }
 
-static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = {
-	.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-	div = params->frequency / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x84; /* 0xC4 */
-	buf[3] = 0x08;
-
-	if (params->frequency < 1500000)
-		buf[3] |= 0x10;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
 static u8 samsung_tbmu24112_inittab[] = {
 	0x01, 0x15,
 	0x02, 0x30,
@@ -318,15 +272,18 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
 	struct i2c_adapter *i2c)
 {
 	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
-	if (fc->fe != NULL) {
-		struct dvb_frontend_ops *ops  = &fc->fe->ops;
-		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
-		ops->set_voltage = flexcop_set_voltage;
-		fc->fe_sleep = ops->sleep;
-		ops->sleep = flexcop_sleep;
-		return 1;
-	}
-	return 0;
+	if (!fc->fe)
+		return 0;
+
+	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+			DVB_PLL_SAMSUNG_TBMU24112))
+		return 0;
+
+	fc->fe->ops.set_voltage = flexcop_set_voltage;
+	fc->fe_sleep = fc->fe->ops.sleep;
+	fc->fe->ops.sleep = flexcop_sleep;
+	return 1;
+
 }
 #else
 #define skystar2_rev26_attach NULL
-- 
cgit v1.2.3


From d6ff0d4097028addee38d92dff142e1e28259275 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 11 Jun 2009 15:31:22 -0700
Subject: b2c2: Use dvb-pll for Cablestar2

From: Trent Piepho <xyzzy@speakeasy.org>

The dvb-pll code should do the same thing that
alps_tdee4_stv0297_tuner_set_params() was doing.  Except the dvb-pll code
will check for tuner presence when attaching, while the old code didn't.

This tuner appears to not be behind the stv0297's I2C gate but is instead
on a different I2C adapter provided by the flexcop chip.  The old code
would turn the I2C gate off each time the tuner was used.  I've changed it
to turn the gate off when the tuner is attached and then disable the gate
control function.  This should result in the gate staying off, which should
be even better.

Priority: normal

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
---
 linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 73 +++++++------------------
 1 file changed, 19 insertions(+), 54 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 928bc4d4d..f56ffc0e2 100644
--- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -511,54 +511,7 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
 #endif
 
 /* CableStar2 DVB-C */
-#if FE_SUPPORTED(STV0297)
-static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
-		struct dvb_frontend_parameters *fep)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	u8 buf[4];
-	u16 div;
-	int ret;
-
-/* 62.5 kHz * 10 */
-#define REF_FREQ    625
-#define FREQ_OFFSET 36125
-
-	div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
-/* 4 MHz = 4000 KHz */
-
-	buf[0] = (u8)( div >> 8) & 0x7f;
-	buf[1] = (u8)        div & 0xff;
-
-/* F(osc) = N * Reference Freq. (62.5 kHz)
- * byte 2 :  0 N14 N13 N12 N11 N10 N9  N8
- * byte 3 : N7 N6  N5  N4  N3  N2  N1  N0
- * byte 4 : 1  *   *   AGD R3  R2  R1  R0
- * byte 5 : C1 *   RE  RTS BS4 BS3 BS2 BS1
- * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
-	buf[2] = 0x95;
-
-/* Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
- *  47 - 153   0  *  0   0   0   0   0   1   0x01
- * 153 - 430   0  *  0   0   0   0   1   0   0x02
- * 430 - 822   0  *  0   0   1   0   0   0   0x08
- * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
-
-	     if (fep->frequency <= 153000000) buf[3] = 0x01;
-	else if (fep->frequency <= 430000000) buf[3] = 0x02;
-	else if (fep->frequency <= 822000000) buf[3] = 0x08;
-	else buf[3] = 0x88;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
-	buf[0], buf[1], buf[2], buf[3]);
-	ret = fc->i2c_request(&fc->fc_i2c_adap[2],
-			FC_WRITE, 0x61, buf[0], &buf[1], 3);
-	deb_tuner("tuner write returned: %d\n",ret);
-	return ret;
-}
-
+#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL)
 static u8 alps_tdee4_stv0297_inittab[] = {
 	0x80, 0x01,
 	0x80, 0x00,
@@ -642,13 +595,25 @@ static int cablestar2_attach(struct flexcop_device *fc,
 {
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (!fc->fe) {
-		/* Reset for next frontend to try */
-		fc->fc_i2c_adap[0].no_base_addr = 0;
-		return 0;
-	}
-	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
+	if (!fc->fe)
+		goto fail;
+
+	/* This tuner doesn't use the stv0297's I2C gate, but instead the
+	 * tuner is connected to a different flexcop I2C adapter.  */
+	if (fc->fe->ops.i2c_gate_ctrl)
+		fc->fe->ops.i2c_gate_ctrl(fc->fe, 0);
+	fc->fe->ops.i2c_gate_ctrl = NULL;
+
+	if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61,
+			fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4))
+		goto fail;
+
 	return 1;
+
+fail:
+	/* Reset for next frontend to try */
+	fc->fc_i2c_adap[0].no_base_addr = 0;
+	return 0;
 }
 #else
 #define cablestar2_attach NULL
-- 
cgit v1.2.3


From 337e432b2e75655ab7d267af800bd4853f8cf3c9 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 19 Jul 2009 17:19:18 -0400
Subject: cx23885-417: fix broken IOCTL handling

From: Michael Krufky <mkrufky@kernellabs.com>

IOCTLS will never get handled if we dont connect
video_ioctl2 to mpeg_fops.ioctl

Priority: high

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
---
 linux/drivers/media/video/cx23885/cx23885-417.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cx23885-417.c b/linux/drivers/media/video/cx23885/cx23885-417.c
index 9974d9a78..9c5233906 100644
--- a/linux/drivers/media/video/cx23885/cx23885-417.c
+++ b/linux/drivers/media/video/cx23885/cx23885-417.c
@@ -1683,6 +1683,7 @@ static struct v4l2_file_operations mpeg_fops = {
 	.read	       = mpeg_read,
 	.poll          = mpeg_poll,
 	.mmap	       = mpeg_mmap,
+	.ioctl	       = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
-- 
cgit v1.2.3


From ac5128d842099f6536d4acef3243b0881043e519 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 19 Jul 2009 16:55:35 -0400
Subject: cx23885: check pointers before dereferencing in dprintk macro

From: Michael Krufky <mkrufky@kernellabs.com>

When enabling debug with v4l_debug set to 2 or greater, the driver
OOPS's on startup.  Checks dev pointer before dereferencing, in
order to prevent this OOPS.

Priority: high

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
---
 linux/drivers/media/video/cx23885/cx23885-417.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cx23885-417.c b/linux/drivers/media/video/cx23885/cx23885-417.c
index 9c5233906..02909d7a9 100644
--- a/linux/drivers/media/video/cx23885/cx23885-417.c
+++ b/linux/drivers/media/video/cx23885/cx23885-417.c
@@ -57,7 +57,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
 
 #define dprintk(level, fmt, arg...)\
 	do { if (v4l_debug >= level) \
-		printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+		printk(KERN_DEBUG "%s: " fmt, \
+		(dev) ? dev->name : "cx23885[?]", ## arg); \
 	} while (0)
 
 static struct cx23885_tvnorm cx23885_tvnorms[] = {
-- 
cgit v1.2.3


From 1024f9d1fd44ef073b47efac545a4d16b4ced8f7 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 25 Jun 2009 22:43:31 -0400
Subject: cx23885: Remove hardcoded gpio bits from the encoder driver

From: Steven Toth <stoth@kernellabs.com>

The encoder driver has hardcoded GPIO bits set for the HVR1800, regardless
of whether it's being used by a HVR1800 or not. I've implemented some generic
GPIO manipulation routines and I'm calling them only when appropriate.

Priority: normal

Signed-off-by: Steven Toth <stoth@kernellabs.com>
---
 linux/drivers/media/video/cx23885/cx23885-417.c   | 57 ++++++++++++++---------
 linux/drivers/media/video/cx23885/cx23885-cards.c |  9 ++++
 linux/drivers/media/video/cx23885/cx23885-core.c  |  8 ++++
 linux/drivers/media/video/cx23885/cx23885.h       |  9 ++++
 4 files changed, 61 insertions(+), 22 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cx23885-417.c b/linux/drivers/media/video/cx23885/cx23885-417.c
index 02909d7a9..fe0b3c41d 100644
--- a/linux/drivers/media/video/cx23885/cx23885-417.c
+++ b/linux/drivers/media/video/cx23885/cx23885-417.c
@@ -629,6 +629,39 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value)
 	return retval;
 }
 
+void mc417_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Set the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val |= (mask & 0x000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Clear the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val &= ~(mask & 0x0000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	u32 val;
+
+	/* Enable GPIO direction bits */
+	mc417_register_read(dev, 0x9020, &val);
+	if (asoutput)
+		val |= (mask & 0x0000ffff);
+	else
+		val &= ~(mask & 0x0000ffff);
+
+	mc417_register_write(dev, 0x9020, val);
+}
 /* ------------------------------------------------------------------ */
 
 /* MPEG encoder API */
@@ -954,25 +987,8 @@ static int cx23885_load_firmware(struct cx23885_dev *dev)
 	retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
 		IVTV_CMD_HW_BLOCKS_RST);
 
-	/* Restore GPIO settings, make sure EIO14 is enabled as an output. */
-	dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n",
-		__func__, gpio_output);
-	/* Power-up seems to have GPIOs AFU. This was causing digital side
-	 * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at
-	 * power-up.
-	 * gpio_output |= (1<<14);
-	 */
-	/* Note: GPIO14 is specific to the HVR1800 here */
-	gpio_output = 0x10ff0411 | (1<<14);
-	retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14));
-	dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n",
-		__func__, gpio_output);
-
-	dprintk(1, "%s: GPIO value  EIO 0-15 was = 0x%x\n",
-		__func__, value);
-	value |= (1<<14);
-	dprintk(1, "%s: GPIO value  EIO 0-15 now = 0x%x\n",
-		__func__, value);
+	/* F/W power up disturbs the GPIOs, restore state */
+	retval |= mc417_register_write(dev, 0x9020, gpio_output);
 	retval |= mc417_register_write(dev, 0x900C, value);
 
 	retval |= mc417_register_read(dev, IVTV_REG_VPU, &value);
@@ -1792,9 +1808,6 @@ int cx23885_417_register(struct cx23885_dev *dev)
 		return err;
 	}
 
-	/* Initialize MC417 registers */
-	cx23885_mc417_init(dev);
-
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
 	       dev->name, dev->v4l_device->num);
 
diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index bf426f041..623607b55 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -583,6 +583,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		/* CX23417 GPIO's */
 		/* EIO15 Zilog Reset */
 		/* EIO14 S5H1409/CX24227 Reset */
+		mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
+		mdelay(100);
+
+		/* Bring the demod and blaster out of reset */
+		mc417_gpio_set(dev, GPIO_15 | GPIO_14);
+		mdelay(100);
 
 		/* Force the TDA8295A into reset and back */
 		cx_set(GP0_IO, 0x00040004);
diff --git a/linux/drivers/media/video/cx23885/cx23885-core.c b/linux/drivers/media/video/cx23885/cx23885-core.c
index 6988361c9..351210e5c 100644
--- a/linux/drivers/media/video/cx23885/cx23885-core.c
+++ b/linux/drivers/media/video/cx23885/cx23885-core.c
@@ -869,6 +869,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n",
 		__func__, dev->radio_type, dev->radio_addr);
 
+	/* The cx23417 encoder has GPIO's that need to be initialised
+	 * before DVB, so that demodulators and tuners are out of
+	 * reset before DVB uses them.
+	 */
+	if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) ||
+		(cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+			cx23885_mc417_init(dev);
+
 	/* init hardware */
 	cx23885_reset(dev);
 
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index 2a384e6aa..a507af77a 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -89,6 +89,12 @@
 #define GPIO_7 0x00000080
 #define GPIO_8 0x00000100
 #define GPIO_9 0x00000200
+#define GPIO_10 0x00000400
+#define GPIO_11 0x00000800
+#define GPIO_12 0x00001000
+#define GPIO_13 0x00002000
+#define GPIO_14 0x00004000
+#define GPIO_15 0x00008000
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\
@@ -506,6 +512,9 @@ extern void cx23885_417_check_encoder(struct cx23885_dev *dev);
 extern void cx23885_mc417_init(struct cx23885_dev *dev);
 extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value);
 extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value);
+extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
 
 
 /* ----------------------------------------------------------- */
-- 
cgit v1.2.3


From 9565b71c51910214d91b7ffa96bffa3f2665c75c Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 25 Jun 2009 22:50:39 -0400
Subject: cx23885: Convert existing HVR1800 GPIO calls into new format

From: Steven Toth <stoth@kernellabs.com>

... improves readability and routes the calls through a specific single point.

Priority: normal

Signed-off-by: Steven Toth <stoth@kernellabs.com>
---
 linux/drivers/media/video/cx23885/cx23885-cards.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index 623607b55..edb99215b 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -594,11 +594,12 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		mdelay(100);
 
 		/* Force the TDA8295A into reset and back */
-		cx_set(GP0_IO, 0x00040004);
+		cx23885_gpio_enable(dev, GPIO_2, 1);
+		cx23885_gpio_set(dev, GPIO_2);
 		mdelay(20);
-		cx_clear(GP0_IO, 0x00000004);
+		cx23885_gpio_clear(dev, GPIO_2);
 		mdelay(20);
-		cx_set(GP0_IO, 0x00040004);
+		cx23885_gpio_set(dev, GPIO_2);
 		mdelay(20);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
-- 
cgit v1.2.3


From 680b58a1db752ccb021764aae84f0a40b1825e7e Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@netup.ru>
Date: Mon, 20 Jul 2009 00:37:09 +0400
Subject: Add output clock configuration for stv6110 tuner.

From: Igor M. Liplianin <liplianin@netup.ru>

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv6110.c | 10 ++++++++++
 linux/drivers/media/dvb/frontends/stv6110.h |  1 +
 2 files changed, 11 insertions(+)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/stv6110.c b/linux/drivers/media/dvb/frontends/stv6110.c
index 70efac869..5aabb782e 100644
--- a/linux/drivers/media/dvb/frontends/stv6110.c
+++ b/linux/drivers/media/dvb/frontends/stv6110.c
@@ -36,6 +36,7 @@ struct stv6110_priv {
 	struct i2c_adapter *i2c;
 
 	u32 mclk;
+	u8 clk_div;
 	u8 regs[8];
 };
 
@@ -221,6 +222,10 @@ static int stv6110_init(struct dvb_frontend *fe)
 	priv->regs[RSTV6110_CTRL1] |=
 				((((priv->mclk / 1000000) - 16) & 0x1f) << 3);
 
+	/* divisor value for the output clock */
+	priv->regs[RSTV6110_CTRL2] &= ~0xc0;
+	priv->regs[RSTV6110_CTRL2] |= (priv->clk_div << 6);
+
 	stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1], RSTV6110_CTRL1, 8);
 	msleep(1);
 	stv6110_set_bandwidth(fe, 72000000);
@@ -418,6 +423,10 @@ struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
 	};
 	int ret;
 
+	/* divisor value for the output clock */
+	reg0[2] &= ~0xc0;
+	reg0[2] |= (config->clk_div << 6);
+
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
@@ -436,6 +445,7 @@ struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
 	priv->i2c_address = config->i2c_address;
 	priv->i2c = i2c;
 	priv->mclk = config->mclk;
+	priv->clk_div = config->clk_div;
 
 	memcpy(&priv->regs, &reg0[1], 8);
 
diff --git a/linux/drivers/media/dvb/frontends/stv6110.h b/linux/drivers/media/dvb/frontends/stv6110.h
index 1c0314d6a..2574e1fba 100644
--- a/linux/drivers/media/dvb/frontends/stv6110.h
+++ b/linux/drivers/media/dvb/frontends/stv6110.h
@@ -42,6 +42,7 @@ struct stv6110_config {
 	u8 i2c_address;
 	u32 mclk;
 	int iq_wiring;
+	u8 clk_div;	/* divisor value for the output clock */
 };
 
 #if defined(CONFIG_DVB_STV6110) || (defined(CONFIG_DVB_STV6110_MODULE) \
-- 
cgit v1.2.3


From f3641acdca07f8402060ee7ff77cb0bc72634413 Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@netup.ru>
Date: Mon, 20 Jul 2009 00:57:29 +0400
Subject: stv6110 tuner: remove unused iq_wiring configuration parameter.

From: Igor M. Liplianin <liplianin@netup.ru>

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv6110.h     | 1 -
 linux/drivers/media/video/cx23885/cx23885-dvb.c | 2 --
 2 files changed, 3 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/stv6110.h b/linux/drivers/media/dvb/frontends/stv6110.h
index 2574e1fba..9db240241 100644
--- a/linux/drivers/media/dvb/frontends/stv6110.h
+++ b/linux/drivers/media/dvb/frontends/stv6110.h
@@ -41,7 +41,6 @@
 struct stv6110_config {
 	u8 i2c_address;
 	u32 mclk;
-	int iq_wiring;
 	u8 clk_div;	/* divisor value for the output clock */
 };
 
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 85fac41e7..805272239 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -410,13 +410,11 @@ static struct stv0900_config netup_stv0900_config = {
 static struct stv6110_config netup_stv6110_tunerconfig_a = {
 	.i2c_address = 0x60,
 	.mclk = 27000000,
-	.iq_wiring = 0,
 };
 
 static struct stv6110_config netup_stv6110_tunerconfig_b = {
 	.i2c_address = 0x63,
 	.mclk = 27000000,
-	.iq_wiring = 1,
 };
 
 static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-- 
cgit v1.2.3


From 20de14406ca4448efc8d965f5bfe0ab0def25b3e Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Mon, 20 Jul 2009 01:06:00 +0400
Subject: Change clocking configuration and frequency for NetUP card.

From: Abylay Ospan <aospan@netup.ru>

Signed-off-by: Abylay Ospan <aospan@netup.ru>
---
 linux/drivers/media/video/cx23885/cx23885-dvb.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 805272239..7f8692f97 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -397,7 +397,7 @@ static struct stv0900_reg stv0900_ts_regs[] = {
 
 static struct stv0900_config netup_stv0900_config = {
 	.demod_address = 0x68,
-	.xtal = 27000000,
+	.xtal = 8000000,
 	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 	.diseqc_mode = 2,/* 2/3 PWM */
 	.ts_config_regs = stv0900_ts_regs,
@@ -409,12 +409,14 @@ static struct stv0900_config netup_stv0900_config = {
 
 static struct stv6110_config netup_stv6110_tunerconfig_a = {
 	.i2c_address = 0x60,
-	.mclk = 27000000,
+	.mclk = 16000000,
+	.clk_div = 1,
 };
 
 static struct stv6110_config netup_stv6110_tunerconfig_b = {
 	.i2c_address = 0x63,
-	.mclk = 27000000,
+	.mclk = 16000000,
+	.clk_div = 1,
 };
 
 static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-- 
cgit v1.2.3


From ab5fd1dec1bf106e22d4bc18f3119830270f20aa Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Mon, 20 Jul 2009 01:15:45 +0400
Subject: Bug fix: stv0900 i2c repeater configuration must be set to manual.

From: Abylay Ospan <aospan@netup.ru>

In automatic mode every stop event on SDA line ends repetition.
However, in  NetUP Dual card on the same i2c bus we have several devices.
If someone using both adapters to lock simultaneously or working with CAM interface
during lock procedure, it lead to end repetition prematurely quite often.
Set stv0900 i2c repeater to manual mode prevents such situation.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv0900_core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c
index 84bf35edb..5dbcf215f 100644
--- a/linux/drivers/media/dvb/frontends/stv0900_core.c
+++ b/linux/drivers/media/dvb/frontends/stv0900_core.c
@@ -234,8 +234,8 @@ enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *i_params)
 #endif
 			stv0900_write_reg(i_params, R0900_P1_TNRCFG, 0x6c);
 			stv0900_write_reg(i_params, R0900_P2_TNRCFG, 0x6f);
-			stv0900_write_reg(i_params, R0900_P1_I2CRPT, 0x24);
-			stv0900_write_reg(i_params, R0900_P2_I2CRPT, 0x24);
+			stv0900_write_reg(i_params, R0900_P1_I2CRPT, 0x20);
+			stv0900_write_reg(i_params, R0900_P2_I2CRPT, 0x20);
 			stv0900_write_reg(i_params, R0900_NCOARSE, 0x13);
 			msleep(3);
 			stv0900_write_reg(i_params, R0900_I2CCFG, 0x08);
@@ -374,8 +374,8 @@ static int stv0900_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 	u32 fi2c;
 
 	dmd_reg(fi2c, F0900_P1_I2CT_ON, F0900_P2_I2CT_ON);
-	if (enable)
-		stv0900_write_bits(i_params, fi2c, 1);
+
+	stv0900_write_bits(i_params, fi2c, enable);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 1f04aaf2cbc9e510002eaabb94b8a85d21b12640 Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@netup.ru>
Date: Mon, 20 Jul 2009 01:21:38 +0400
Subject: stv6110 tuner: Read registers through one time i2c_transfer calling.

From: Igor M. Liplianin <liplianin@netup.ru>

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
---
 linux/drivers/media/dvb/frontends/stv6110.c | 38 +++++++++++------------------
 1 file changed, 14 insertions(+), 24 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/stv6110.c b/linux/drivers/media/dvb/frontends/stv6110.c
index 5aabb782e..dcf1b21ea 100644
--- a/linux/drivers/media/dvb/frontends/stv6110.c
+++ b/linux/drivers/media/dvb/frontends/stv6110.c
@@ -101,35 +101,25 @@ static int stv6110_read_regs(struct dvb_frontend *fe, u8 regs[],
 	struct stv6110_priv *priv = fe->tuner_priv;
 	int rc;
 	u8 reg[] = { start };
-	struct i2c_msg msg_wr = {
-		.addr	= priv->i2c_address,
-		.flags	= 0,
-		.buf	= reg,
-		.len	= 1,
+	struct i2c_msg msg[] = {
+		{
+			.addr	= priv->i2c_address,
+			.flags	= 0,
+			.buf	= reg,
+			.len	= 1,
+		}, {
+			.addr	= priv->i2c_address,
+			.flags	= I2C_M_RD,
+			.buf	= regs,
+			.len	= len,
+		},
 	};
 
-	struct i2c_msg msg_rd = {
-		.addr	= priv->i2c_address,
-		.flags	= I2C_M_RD,
-		.buf	= regs,
-		.len	= len,
-	};
-	/* write subaddr */
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
-	rc = i2c_transfer(priv->i2c, &msg_wr, 1);
-	if (rc != 1)
-		dprintk("%s: i2c error\n", __func__);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-	/* read registers */
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	rc = i2c_transfer(priv->i2c, &msg_rd, 1);
-	if (rc != 1)
+	rc = i2c_transfer(priv->i2c, msg, 2);
+	if (rc != 2)
 		dprintk("%s: i2c error\n", __func__);
 
 	if (fe->ops.i2c_gate_ctrl)
-- 
cgit v1.2.3


From 41e2b46981cc531fe61b04a83a5e2bc4171c9257 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 20 Jul 2009 13:14:17 +0200
Subject: bttv: fix regression: tvaudio must be loaded before tuner

From: Hans Verkuil <hverkuil@xs4all.nl>

Both tvaudio and the tuner share i2c address 0x42. The tvaudio module can
check whether it really is a tda9840, but the tuner can't. So the tvaudio
module must be loaded before the tuner module. This was also the case for
2.6.29, but the order was swapped in 2.6.30.

Thanks to Krzysztof Grygiencz for reporting and testing this.

Priority: high

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
---
 linux/drivers/media/video/bt8xx/bttv-cards.c  | 92 ++++++++++++++-------------
 linux/drivers/media/video/bt8xx/bttv-driver.c |  1 +
 linux/drivers/media/video/bt8xx/bttv.h        |  1 +
 3 files changed, 50 insertions(+), 44 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/video/bt8xx/bttv-cards.c b/linux/drivers/media/video/bt8xx/bttv-cards.c
index 38b238f0f..fdca5f67c 100644
--- a/linux/drivers/media/video/bt8xx/bttv-cards.c
+++ b/linux/drivers/media/video/bt8xx/bttv-cards.c
@@ -3362,8 +3362,6 @@ void __devinit bttv_init_card1(struct bttv *btv)
 /* initialization part two -- after registering i2c bus */
 void __devinit bttv_init_card2(struct bttv *btv)
 {
-	int addr=ADDR_UNSET;
-
 	btv->tuner_type = UNSET;
 
 	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
@@ -3508,9 +3506,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	btv->pll.pll_current = -1;
 
 	/* tuner configuration (from card list / autodetect / insmod option) */
-	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
-		addr = bttv_tvcards[btv->c.type].tuner_addr;
-
 	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
 		if (UNSET == btv->tuner_type)
 			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
@@ -3534,40 +3529,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (UNSET == btv->tuner_type)
 		btv->tuner_type = TUNER_ABSENT;
 
-	if (btv->tuner_type != TUNER_ABSENT) {
-		struct tuner_setup tun_setup;
-
-		/* Load tuner module before issuing tuner config call! */
-		if (bttv_tvcards[btv->c.type].has_radio)
-			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
-		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-		tun_setup.type = btv->tuner_type;
-		tun_setup.addr = addr;
-
-		if (bttv_tvcards[btv->c.type].has_radio)
-			tun_setup.mode_mask |= T_RADIO;
-
-		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
-	}
-
-	if (btv->tda9887_conf) {
-		struct v4l2_priv_tun_config tda9887_cfg;
-
-		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv = &btv->tda9887_conf;
-
-		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
-	}
-
 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
 		   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
 	btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
@@ -3578,15 +3539,15 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		btv->has_remote = remote[btv->c.nr];
 
 	if (bttv_tvcards[btv->c.type].has_radio)
-		btv->has_radio=1;
+		btv->has_radio = 1;
 	if (bttv_tvcards[btv->c.type].has_remote)
-		btv->has_remote=1;
+		btv->has_remote = 1;
 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
-		btv->gpioirq=1;
+		btv->gpioirq = 1;
 	if (bttv_tvcards[btv->c.type].volume_gpio)
-		btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+		btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
-		btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+		btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
 
 	if (btv->tuner_type == TUNER_ABSENT)
 		return;  /* no tuner or related drivers to load */
@@ -3704,6 +3665,49 @@ no_audio:
 }
 
 
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+	int addr = ADDR_UNSET;
+
+	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+		addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+	if (btv->tuner_type != TUNER_ABSENT) {
+		struct tuner_setup tun_setup;
+
+		/* Load tuner module before issuing tuner config call! */
+		if (bttv_tvcards[btv->c.type].has_radio)
+			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+		tun_setup.type = btv->tuner_type;
+		tun_setup.addr = addr;
+
+		if (bttv_tvcards[btv->c.type].has_radio)
+			tun_setup.mode_mask |= T_RADIO;
+
+		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+	}
+
+	if (btv->tda9887_conf) {
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv = &btv->tda9887_conf;
+
+		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+	}
+}
+
 /* ----------------------------------------------------------------------- */
 
 static void modtec_eeprom(struct bttv *btv)
diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c
index 9c25efe06..18085ba61 100644
--- a/linux/drivers/media/video/bt8xx/bttv-driver.c
+++ b/linux/drivers/media/video/bt8xx/bttv-driver.c
@@ -4457,6 +4457,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 
 	/* some card-specific stuff (needs working i2c) */
 	bttv_init_card2(btv);
+	bttv_init_tuner(btv);
 	init_irqreg(btv);
 
 	/* register video4linux + input */
diff --git a/linux/drivers/media/video/bt8xx/bttv.h b/linux/drivers/media/video/bt8xx/bttv.h
index 6b7b62bd4..a0cb26b4a 100644
--- a/linux/drivers/media/video/bt8xx/bttv.h
+++ b/linux/drivers/media/video/bt8xx/bttv.h
@@ -284,6 +284,7 @@ extern struct tvcard bttv_tvcards[];
 extern void bttv_idcard(struct bttv *btv);
 extern void bttv_init_card1(struct bttv *btv);
 extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
 
 /* card-specific funtions */
 extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
-- 
cgit v1.2.3


From e466ec6a572b81252cdc4a681c8ca4949b929dcd Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 20 Jul 2009 14:59:21 +0200
Subject: mt312: fix build for kernels < 2.6.24

From: Hans Verkuil <hverkuil@xs4all.nl>

Add compat.h include to get the KERN_CONT define needed for older kernels.

Priority: normal

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
---
 linux/drivers/media/dvb/frontends/mt312.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux')

diff --git a/linux/drivers/media/dvb/frontends/mt312.c b/linux/drivers/media/dvb/frontends/mt312.c
index 071328d7b..f348f8bea 100644
--- a/linux/drivers/media/dvb/frontends/mt312.c
+++ b/linux/drivers/media/dvb/frontends/mt312.c
@@ -35,6 +35,7 @@
 #include "dvb_frontend.h"
 #include "mt312_priv.h"
 #include "mt312.h"
+#include "compat.h"
 
 
 struct mt312_state {
-- 
cgit v1.2.3


From 59ac780bc36a1d932e6290e0ea492085f2ec35cd Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@netup.ru>
Date: Mon, 20 Jul 2009 19:27:27 +0400
Subject: Add CAM presence checkout during CiMax init for NetUP card.

From: Igor M. Liplianin <liplianin@netup.ru>

CAM presence checkout is needed after power on PC.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
---
 linux/drivers/media/video/cx23885/cimax2.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cimax2.c b/linux/drivers/media/video/cx23885/cimax2.c
index fed6d9f9f..d717b9416 100644
--- a/linux/drivers/media/video/cx23885/cimax2.c
+++ b/linux/drivers/media/video/cx23885/cimax2.c
@@ -455,6 +455,7 @@ int netup_ci_init(struct cx23885_tsport *port)
 #else
 	INIT_WORK(&state->work, netup_read_ci_status);
 #endif
+	schedule_work(&state->work);
 
 	ci_dbg_print("%s: CI initialized!\n", __func__);
 
-- 
cgit v1.2.3


From 7991d8e7d32620e4b6f0fd92a78e4a090b4a09ee Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Mon, 20 Jul 2009 14:37:25 -0400
Subject: cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850

From: Steven Toth <stoth@kernellabs.com>

cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850

Priority: normal

Signed-off-by: Steven Toth <stoth@kernellabs.com>
---
 linux/Documentation/video4linux/CARDLIST.cx23885  |  1 +
 linux/drivers/media/video/cx23885/cx23885-cards.c | 49 ++++++++++++++++++++++-
 linux/drivers/media/video/cx23885/cx23885-dvb.c   | 11 +++++
 linux/drivers/media/video/cx23885/cx23885.h       |  1 +
 4 files changed, 61 insertions(+), 1 deletion(-)

(limited to 'linux')

diff --git a/linux/Documentation/video4linux/CARDLIST.cx23885 b/linux/Documentation/video4linux/CARDLIST.cx23885
index 19feb514f..525edb37c 100644
--- a/linux/Documentation/video4linux/CARDLIST.cx23885
+++ b/linux/Documentation/video4linux/CARDLIST.cx23885
@@ -22,3 +22,4 @@
  21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
  22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
  23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
+ 24 -> Hauppauge WinTV-HVR1850                             [0070:8541]
diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index edb99215b..2ffc83e60 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -206,6 +206,11 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Magic-Pro ProHDTV Extreme 2",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
+		.name		= "Hauppauge WinTV-HVR1850",
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -333,6 +338,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x14f1,
 		.subdevice = 0x8657,
 		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8541,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -492,8 +501,13 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
 		 * DVB-T and MPEG2 HW Encoder */
 		break;
+	case 85021:
+		/* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+		break;
 	default:
-		printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
+		printk(KERN_WARNING "%s: warning: "
+			"unknown hauppauge model #%d\n",
 			dev->name, tv.model);
 		break;
 	}
@@ -743,6 +757,36 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x00060006);
 		mdelay(100);
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 Wake# */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 C_IR_TX */
+		/* GPIO-21 I2S DAT */
+		/* GPIO-22 I2S WCLK */
+		/* GPIO-23 I2S BCLK */
+		/* ALT GPIO: EXP GPIO LATCH */
+
+		/* CX23417 GPIO's */
+		/* GPIO-14 S5H1411/CX24228 Reset */
+		/* GPIO-13 EEPROM write protect */
+		mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
+		mdelay(100);
+
+		/* Bring the demod out of reset */
+		mc417_gpio_set(dev, GPIO_14);
+		mdelay(100);
+
+		/* CX24228 GPIO */
+		/* Connected to IF / Mux */
+		break;
 	}
 }
 
@@ -759,6 +803,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -798,6 +843,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -865,6 +911,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 85fac41e7..6edfbbc81 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -867,6 +867,17 @@ static int dvb_register(struct cx23885_tsport *port)
 				&magicpro_prohdtve2_xc5000_config);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[0].i2c_adap,
+				&hauppauge_tda18271_config);
+		break;
+
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index a507af77a..f71277845 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -78,6 +78,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
 #define CX23885_BOARD_MYGICA_X8506             22
 #define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
+#define CX23885_BOARD_HAUPPAUGE_HVR1850        24
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
-- 
cgit v1.2.3


From 988cd25daffa554b51e3f0d5858cb1727f8a9c09 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Mon, 20 Jul 2009 14:40:31 -0400
Subject: cx23885: Modify hardware revision detection for newer silicon

From: Steven Toth <stoth@kernellabs.com>

cx23885: Modify hardware revision detection for newer silicon

Priority: normal

Signed-off-by: Steven Toth <stoth@kernellabs.com>
---
 linux/drivers/media/video/cx23885/cx23885-core.c | 22 +++++++++++++++++++---
 linux/drivers/media/video/cx23885/cx23885.h      |  1 +
 2 files changed, 20 insertions(+), 3 deletions(-)

(limited to 'linux')

diff --git a/linux/drivers/media/video/cx23885/cx23885-core.c b/linux/drivers/media/video/cx23885/cx23885-core.c
index 351210e5c..4854d54f1 100644
--- a/linux/drivers/media/video/cx23885/cx23885-core.c
+++ b/linux/drivers/media/video/cx23885/cx23885-core.c
@@ -714,12 +714,26 @@ static void cx23885_dev_checkrevision(struct cx23885_dev *dev)
 		dev->hwrevision = 0xa1;
 		break;
 	case 0x02:
-		/* CX23885-13Z */
+		/* CX23885-13Z/14Z */
 		dev->hwrevision = 0xb0;
 		break;
 	case 0x03:
-		/* CX23888-22Z */
-		dev->hwrevision = 0xc0;
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-21Z/22Z */
+			dev->hwrevision = 0xc0;
+		} else {
+			/* CX23885-14Z */
+			dev->hwrevision = 0xa4;
+		}
+		break;
+	case 0x04:
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-31Z */
+			dev->hwrevision = 0xd0;
+		} else {
+			/* CX23885-15Z, CX23888-31Z */
+			dev->hwrevision = 0xa5;
+		}
 		break;
 	case 0x0e:
 		/* CX23887-15Z */
@@ -757,6 +771,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 
 	/* Configure the internal memory */
 	if (dev->pci->device == 0x8880) {
+		/* Could be 887 or 888, assume a default */
 		dev->bridge = CX23885_BRIDGE_887;
 		/* Apply a sensible clock frequency for the PCIe bridge */
 		dev->clk_freq = 25000000;
@@ -1259,6 +1274,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
 	switch (dev->bridge) {
 	case CX23885_BRIDGE_885:
 	case CX23885_BRIDGE_887:
+	case CX23885_BRIDGE_888:
 		/* enable irqs */
 		dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
 		cx_set(port->reg_ts_int_msk,  port->ts_int_msk_val);
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index f71277845..6ddabc263 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -340,6 +340,7 @@ struct cx23885_dev {
 		CX23885_BRIDGE_UNDEFINED = 0,
 		CX23885_BRIDGE_885 = 885,
 		CX23885_BRIDGE_887 = 887,
+		CX23885_BRIDGE_888 = 888,
 	} bridge;
 
 	/* Analog video */
-- 
cgit v1.2.3